summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ata_generic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ata_generic.c')
-rw-r--r--drivers/ata/ata_generic.c258
1 files changed, 258 insertions, 0 deletions
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
new file mode 100644
index 000000000..9ff545ce8
--- /dev/null
+++ b/drivers/ata/ata_generic.c
@@ -0,0 +1,258 @@
+/*
+ * ata_generic.c - Generic PATA/SATA controller driver.
+ * Copyright 2005 Red Hat Inc, all rights reserved.
+ *
+ * Elements from ide/pci/generic.c
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Driver for PCI IDE interfaces implementing the standard bus mastering
+ * interface functionality. This assumes the BIOS did the drive set up and
+ * tuning for us. By default we do not grab all IDE class devices as they
+ * may have other drivers or need fixups to avoid problems. Instead we keep
+ * a default list of stuff without documentation/driver that appears to
+ * work.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "ata_generic"
+#define DRV_VERSION "0.2.15"
+
+/*
+ * A generic parallel ATA driver using libata
+ */
+
+enum {
+ ATA_GEN_CLASS_MATCH = (1 << 0),
+ ATA_GEN_FORCE_DMA = (1 << 1),
+ ATA_GEN_INTEL_IDER = (1 << 2),
+};
+
+/**
+ * generic_set_mode - mode setting
+ * @link: link to set up
+ * @unused: returned device on error
+ *
+ * Use a non standard set_mode function. We don't want to be tuned.
+ * The BIOS configured everything. Our job is not to fiddle. We
+ * read the dma enabled bits from the PCI configuration of the device
+ * and respect them.
+ */
+
+static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+ struct ata_port *ap = link->ap;
+ const struct pci_device_id *id = ap->host->private_data;
+ int dma_enabled = 0;
+ struct ata_device *dev;
+
+ if (id->driver_data & ATA_GEN_FORCE_DMA) {
+ dma_enabled = 0xff;
+ } else if (ap->ioaddr.bmdma_addr) {
+ /* Bits 5 and 6 indicate if DMA is active on master/slave */
+ dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ }
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->dma_mode = XFER_MW_DMA_0;
+ /* We do need the right mode information for DMA or PIO
+ and this comes from the current configuration flags */
+ if (dma_enabled & (1 << (5 + dev->devno))) {
+ unsigned int xfer_mask = ata_id_xfermask(dev->id);
+ const char *name;
+
+ if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+ name = ata_mode_string(xfer_mask);
+ else {
+ /* SWDMA perhaps? */
+ name = "DMA";
+ xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0);
+ }
+
+ ata_dev_info(dev, "configured for %s\n", name);
+
+ dev->xfer_mode = ata_xfer_mask2mode(xfer_mask);
+ dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode);
+ dev->flags &= ~ATA_DFLAG_PIO;
+ } else {
+ ata_dev_info(dev, "configured for PIO\n");
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ }
+ }
+ return 0;
+}
+
+static struct scsi_host_template generic_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations generic_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_unknown,
+ .set_mode = generic_set_mode,
+};
+
+static int all_generic_ide; /* Set to claim all devices */
+
+/**
+ * is_intel_ider - identify intel IDE-R devices
+ * @dev: PCI device
+ *
+ * Distinguish Intel IDE-R controller devices from other Intel IDE
+ * devices. IDE-R devices have no timing registers and are in
+ * most respects virtual. They should be driven by the ata_generic
+ * driver.
+ *
+ * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has
+ * it non zero. All Intel ATA has 0x40 writable (timing), but it is
+ * not writable on IDE-R devices (this is guaranteed).
+ */
+
+static int is_intel_ider(struct pci_dev *dev)
+{
+ /* For Intel IDE the value at 0xF8 is only zero on IDE-R
+ interfaces */
+ u32 r;
+ u16 t;
+
+ /* Check the manufacturing ID, it will be zero for IDE-R */
+ pci_read_config_dword(dev, 0xF8, &r);
+ /* Not IDE-R: punt so that ata_(old)piix gets it */
+ if (r != 0)
+ return 0;
+ /* 0xF8 will also be zero on some early Intel IDE devices
+ but they will have a sane timing register */
+ pci_read_config_word(dev, 0x40, &t);
+ if (t != 0)
+ return 0;
+ /* Finally check if the timing register is writable so that
+ we eliminate any early devices hot-docked in a docking
+ station */
+ pci_write_config_word(dev, 0x40, 1);
+ pci_read_config_word(dev, 0x40, &t);
+ if (t) {
+ pci_write_config_word(dev, 0x40, 0);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * ata_generic_init - attach generic IDE
+ * @dev: PCI device found
+ * @id: match entry
+ *
+ * Called each time a matching IDE interface is found. We check if the
+ * interface is one we wish to claim and if so we perform any chip
+ * specific hacks then let the ATA layer do the heavy lifting.
+ */
+
+static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ u16 command;
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &generic_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info, NULL };
+
+ /* Don't use the generic entry unless instructed to do so */
+ if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
+ return -ENODEV;
+
+ if ((id->driver_data & ATA_GEN_INTEL_IDER) && !all_generic_ide)
+ if (!is_intel_ider(dev))
+ return -ENODEV;
+
+ /* Devices that need care */
+ if (dev->vendor == PCI_VENDOR_ID_UMC &&
+ dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
+ (!(PCI_FUNC(dev->devfn) & 1)))
+ return -ENODEV;
+
+ if (dev->vendor == PCI_VENDOR_ID_OPTI &&
+ dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
+ (!(PCI_FUNC(dev->devfn) & 1)))
+ return -ENODEV;
+
+ /* Don't re-enable devices in generic mode or we will break some
+ motherboards with disabled and unused IDE controllers */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ if (!(command & PCI_COMMAND_IO))
+ return -ENODEV;
+
+ if (dev->vendor == PCI_VENDOR_ID_AL)
+ ata_pci_bmdma_clear_simplex(dev);
+
+ if (dev->vendor == PCI_VENDOR_ID_ATI) {
+ int rc = pcim_enable_device(dev);
+ if (rc < 0)
+ return rc;
+ pcim_pin_device(dev);
+ }
+ return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0);
+}
+
+static struct pci_device_id ata_generic[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), },
+ { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), },
+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), },
+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), },
+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), },
+ { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
+ { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
+ { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+ .driver_data = ATA_GEN_FORCE_DMA },
+#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
+#endif
+ /* Intel, IDE class device */
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL,
+ .driver_data = ATA_GEN_INTEL_IDER },
+ /* Must come last. If you add entries adjust this table appropriately */
+ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+ .driver_data = ATA_GEN_CLASS_MATCH },
+ { 0, },
+};
+
+static struct pci_driver ata_generic_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ata_generic,
+ .probe = ata_generic_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(ata_generic_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for generic ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ata_generic);
+MODULE_VERSION(DRV_VERSION);
+
+module_param(all_generic_ide, int, 0);