diff options
Diffstat (limited to 'drivers/ata/pata_cs5535.c')
| -rw-r--r-- | drivers/ata/pata_cs5535.c | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c new file mode 100644 index 000000000..6725931f3 --- /dev/null +++ b/drivers/ata/pata_cs5535.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pata-cs5535.c - CS5535 PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and + * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de> + * and Alexander Kiausch <alex.kiausch@t-online.de> + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + * TODO + * Review errata to see if serializing is necessary + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <asm/msr.h> + +#define DRV_NAME "pata_cs5535" +#define DRV_VERSION "0.2.12" + +/* + * The Geode (Aka Athlon GX now) uses an internal MSR based + * bus system for control. Demented but there you go. + */ + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) + +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 + +#define CS5535_CABLE_DETECT 0x48 + +/** + * cs5535_cable_detect - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. Return a libata + * cable type. + */ + +static int cs5535_cable_detect(struct ata_port *ap) +{ + u8 cable; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); + if (cable & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5535_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. The CS5535 is pretty clean about all this + */ + +static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio_timings[5] = { + 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 + }; + static const u16 pio_cmd_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + u32 reg, dummy; + struct ata_device *pair = ata_dev_pair(adev); + + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + + /* Command timing has to be for the lowest of the pair of devices */ + if (pair) { + int pairmode = pair->pio_mode - XFER_PIO_0; + cmdmode = min(mode, pairmode); + /* Write the other drive timing register if it changed */ + if (cmdmode < pairmode) + wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); + } + /* Write the drive timing register */ + wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); + + /* Set the PIO "format 1" bit in the DMA timing register */ + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); +} + +/** + * cs5535_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timings[5] = { + 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 + }; + static const u32 mwdma_timings[3] = { + 0x7F0FFFF3, 0x7F035352, 0x7F024241 + }; + u32 reg, dummy; + int mode = adev->dma_mode; + + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + reg &= 0x80000000UL; + if (mode >= XFER_UDMA_0) + reg |= udma_timings[mode - XFER_UDMA_0]; + else + reg |= mwdma_timings[mode - XFER_MW_DMA_0]; + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); +} + +static struct scsi_host_template cs5535_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cs5535_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = cs5535_cable_detect, + .set_piomode = cs5535_set_piomode, + .set_dmamode = cs5535_set_dmamode, +}; + +/** + * cs5535_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &cs5535_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); +} + +static const struct pci_device_id cs5535[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, + + { }, +}; + +static struct pci_driver cs5535_pci_driver = { + .name = DRV_NAME, + .id_table = cs5535, + .probe = cs5535_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cs5535_pci_driver); + +MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5535); +MODULE_VERSION(DRV_VERSION); |