summaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_vsc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_vsc.c')
-rw-r--r--drivers/ata/sata_vsc.c424
1 files changed, 424 insertions, 0 deletions
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
new file mode 100644
index 000000000..8fa952cb9
--- /dev/null
+++ b/drivers/ata/sata_vsc.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
+ *
+ * Maintained by: Jeremy Higdon @ SGI
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2004 SGI
+ *
+ * Bits from Jeff Garzik, Copyright RedHat, Inc.
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/driver-api/libata.rst
+ *
+ * Vitesse hardware documentation presumably available under NDA.
+ * Intel 31244 (same hardware interface) documentation presumably
+ * available from http://developer.intel.com/
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_vsc"
+#define DRV_VERSION "2.3"
+
+enum {
+ VSC_MMIO_BAR = 0,
+
+ /* Interrupt register offsets (from chip base address) */
+ VSC_SATA_INT_STAT_OFFSET = 0x00,
+ VSC_SATA_INT_MASK_OFFSET = 0x04,
+
+ /* Taskfile registers offsets */
+ VSC_SATA_TF_CMD_OFFSET = 0x00,
+ VSC_SATA_TF_DATA_OFFSET = 0x00,
+ VSC_SATA_TF_ERROR_OFFSET = 0x04,
+ VSC_SATA_TF_FEATURE_OFFSET = 0x06,
+ VSC_SATA_TF_NSECT_OFFSET = 0x08,
+ VSC_SATA_TF_LBAL_OFFSET = 0x0c,
+ VSC_SATA_TF_LBAM_OFFSET = 0x10,
+ VSC_SATA_TF_LBAH_OFFSET = 0x14,
+ VSC_SATA_TF_DEVICE_OFFSET = 0x18,
+ VSC_SATA_TF_STATUS_OFFSET = 0x1c,
+ VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
+ VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
+ VSC_SATA_TF_CTL_OFFSET = 0x29,
+
+ /* DMA base */
+ VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
+ VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
+ VSC_SATA_DMA_CMD_OFFSET = 0x70,
+
+ /* SCRs base */
+ VSC_SATA_SCR_STATUS_OFFSET = 0x100,
+ VSC_SATA_SCR_ERROR_OFFSET = 0x104,
+ VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
+
+ /* Port stride */
+ VSC_SATA_PORT_OFFSET = 0x200,
+
+ /* Error interrupt status bit offsets */
+ VSC_SATA_INT_ERROR_CRC = 0x40,
+ VSC_SATA_INT_ERROR_T = 0x20,
+ VSC_SATA_INT_ERROR_P = 0x10,
+ VSC_SATA_INT_ERROR_R = 0x8,
+ VSC_SATA_INT_ERROR_E = 0x4,
+ VSC_SATA_INT_ERROR_M = 0x2,
+ VSC_SATA_INT_PHY_CHANGE = 0x1,
+ VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
+ VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
+ VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
+ VSC_SATA_INT_PHY_CHANGE),
+};
+
+static int vsc_sata_scr_read(struct ata_link *link,
+ unsigned int sc_reg, u32 *val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return -EINVAL;
+ *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
+ return 0;
+}
+
+
+static int vsc_sata_scr_write(struct ata_link *link,
+ unsigned int sc_reg, u32 val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return -EINVAL;
+ writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
+ return 0;
+}
+
+
+static void vsc_freeze(struct ata_port *ap)
+{
+ void __iomem *mask_addr;
+
+ mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+ writeb(0, mask_addr);
+}
+
+
+static void vsc_thaw(struct ata_port *ap)
+{
+ void __iomem *mask_addr;
+
+ mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+ writeb(0xff, mask_addr);
+}
+
+
+static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
+{
+ void __iomem *mask_addr;
+ u8 mask;
+
+ mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+ mask = readb(mask_addr);
+ if (ctl & ATA_NIEN)
+ mask |= 0x80;
+ else
+ mask &= 0x7F;
+ writeb(mask, mask_addr);
+}
+
+
+static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ /*
+ * The only thing the ctl register is used for is SRST.
+ * That is not enabled or disabled via tf_load.
+ * However, if ATA_NIEN is changed, then we need to change
+ * the interrupt register.
+ */
+ if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
+ ap->last_ctl = tf->ctl;
+ vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
+ }
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ ioaddr->lbah_addr);
+ } else if (is_addr) {
+ writew(tf->feature, ioaddr->feature_addr);
+ writew(tf->nsect, ioaddr->nsect_addr);
+ writew(tf->lbal, ioaddr->lbal_addr);
+ writew(tf->lbam, ioaddr->lbam_addr);
+ writew(tf->lbah, ioaddr->lbah_addr);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE)
+ writeb(tf->device, ioaddr->device_addr);
+
+ ata_wait_idle(ap);
+}
+
+
+static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u16 nsect, lbal, lbam, lbah, feature;
+
+ tf->command = ata_sff_check_status(ap);
+ tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ tf->hob_feature = feature >> 8;
+ tf->hob_nsect = nsect >> 8;
+ tf->hob_lbal = lbal >> 8;
+ tf->hob_lbam = lbam >> 8;
+ tf->hob_lbah = lbah >> 8;
+ }
+}
+
+static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
+{
+ if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void vsc_port_intr(u8 port_status, struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ int handled = 0;
+
+ if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
+ vsc_error_intr(port_status, ap);
+ return;
+ }
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled = ata_bmdma_port_intr(ap, qc);
+
+ /* We received an interrupt during a polled command,
+ * or some other spurious condition. Interrupt reporting
+ * with this hardware is fairly reliable so it is safe to
+ * simply clear the interrupt
+ */
+ if (unlikely(!handled))
+ ap->ops->sff_check_status(ap);
+}
+
+/*
+ * vsc_sata_interrupt
+ *
+ * Read the interrupt register and process for the devices that have
+ * them pending.
+ */
+static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ unsigned int i;
+ unsigned int handled = 0;
+ u32 status;
+
+ status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
+
+ if (unlikely(status == 0xffffffff || status == 0)) {
+ if (status)
+ dev_err(host->dev,
+ ": IRQ status == 0xffffffff, PCI fault or device removal?\n");
+ goto out;
+ }
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ u8 port_status = (status >> (8 * i)) & 0xff;
+ if (port_status) {
+ vsc_port_intr(port_status, host->ports[i]);
+ handled++;
+ }
+ }
+
+ spin_unlock(&host->lock);
+out:
+ return IRQ_RETVAL(handled);
+}
+
+
+static struct scsi_host_template vsc_sata_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+
+static struct ata_port_operations vsc_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ /* The IRQ handling is not quite standard SFF behaviour so we
+ cannot use the default lost interrupt handler */
+ .lost_interrupt = ATA_OP_NULL,
+ .sff_tf_load = vsc_sata_tf_load,
+ .sff_tf_read = vsc_sata_tf_read,
+ .freeze = vsc_freeze,
+ .thaw = vsc_thaw,
+ .scr_read = vsc_sata_scr_read,
+ .scr_write = vsc_sata_scr_write,
+};
+
+static void vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
+{
+ port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
+ port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
+ port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
+ port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
+ port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
+ port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
+ port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
+ port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
+ port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
+ port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
+ port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
+ port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
+ port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
+ port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
+ port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
+ writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
+ writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
+}
+
+
+static int vsc_sata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static const struct ata_port_info pi = {
+ .flags = ATA_FLAG_SATA,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &vsc_sata_ops,
+ };
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ void __iomem *mmio_base;
+ int i, rc;
+ u8 cls;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ /* allocate host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+ if (!host)
+ return -ENOMEM;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* check if we have needed resource mapped */
+ if (pci_resource_len(pdev, 0) == 0)
+ return -ENODEV;
+
+ /* map IO regions and initialize host accordingly */
+ rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+ host->iomap = pcim_iomap_table(pdev);
+
+ mmio_base = host->iomap[VSC_MMIO_BAR];
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
+
+ vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+ ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
+ }
+
+ /*
+ * Use 32 bit DMA mask, because 64 bit address support is poor.
+ */
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (rc)
+ return rc;
+
+ /*
+ * Due to a bug in the chip, the default cache line size can't be
+ * used (unless the default is non-zero).
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
+ if (cls == 0x00)
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
+
+ if (pci_enable_msi(pdev) == 0)
+ pci_intx(pdev, 0);
+
+ /*
+ * Config offset 0x98 is "Extended Control and Status Register 0"
+ * Default value is (1 << 28). All bits except bit 28 are reserved in
+ * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
+ * If bit 28 is clear, each port has its own LED.
+ */
+ pci_write_config_dword(pdev, 0x98, 0);
+
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
+ IRQF_SHARED, &vsc_sata_sht);
+}
+
+static const struct pci_device_id vsc_sata_pci_tbl[] = {
+ { PCI_VENDOR_ID_VITESSE, 0x7174,
+ PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+ { PCI_VENDOR_ID_INTEL, 0x3200,
+ PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver vsc_sata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = vsc_sata_pci_tbl,
+ .probe = vsc_sata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+module_pci_driver(vsc_sata_pci_driver);
+
+MODULE_AUTHOR("Jeremy Higdon");
+MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);