diff options
Diffstat (limited to 'drivers/hwspinlock/omap_hwspinlock.c')
| -rw-r--r-- | drivers/hwspinlock/omap_hwspinlock.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c new file mode 100644 index 000000000..3b0556045 --- /dev/null +++ b/drivers/hwspinlock/omap_hwspinlock.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OMAP hardware spinlock driver + * + * Copyright (C) 2010-2015 Texas Instruments Incorporated - http://www.ti.com + * + * Contact: Simon Que <sque@ti.com> + * Hari Kanigeri <h-kanigeri2@ti.com> + * Ohad Ben-Cohen <ohad@wizery.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/hwspinlock.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "hwspinlock_internal.h" + +/* Spinlock register offsets */ +#define SYSSTATUS_OFFSET 0x0014 +#define LOCK_BASE_OFFSET 0x0800 + +#define SPINLOCK_NUMLOCKS_BIT_OFFSET (24) + +/* Possible values of SPINLOCK_LOCK_REG */ +#define SPINLOCK_NOTTAKEN (0) /* free */ +#define SPINLOCK_TAKEN (1) /* locked */ + +static int omap_hwspinlock_trylock(struct hwspinlock *lock) +{ + void __iomem *lock_addr = lock->priv; + + /* attempt to acquire the lock by reading its value */ + return (SPINLOCK_NOTTAKEN == readl(lock_addr)); +} + +static void omap_hwspinlock_unlock(struct hwspinlock *lock) +{ + void __iomem *lock_addr = lock->priv; + + /* release the lock by writing 0 to it */ + writel(SPINLOCK_NOTTAKEN, lock_addr); +} + +/* + * relax the OMAP interconnect while spinning on it. + * + * The specs recommended that the retry delay time will be + * just over half of the time that a requester would be + * expected to hold the lock. + * + * The number below is taken from an hardware specs example, + * obviously it is somewhat arbitrary. + */ +static void omap_hwspinlock_relax(struct hwspinlock *lock) +{ + ndelay(50); +} + +static const struct hwspinlock_ops omap_hwspinlock_ops = { + .trylock = omap_hwspinlock_trylock, + .unlock = omap_hwspinlock_unlock, + .relax = omap_hwspinlock_relax, +}; + +static int omap_hwspinlock_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct hwspinlock_device *bank; + struct hwspinlock *hwlock; + void __iomem *io_base; + int num_locks, i, ret; + /* Only a single hwspinlock block device is supported */ + int base_id = 0; + + if (!node) + return -ENODEV; + + io_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(io_base)) + return PTR_ERR(io_base); + + /* + * make sure the module is enabled and clocked before reading + * the module SYSSTATUS register + */ + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); + goto runtime_err; + } + + /* Determine number of locks */ + i = readl(io_base + SYSSTATUS_OFFSET); + i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET; + + /* + * runtime PM will make sure the clock of this module is + * enabled again iff at least one lock is requested + */ + ret = pm_runtime_put(&pdev->dev); + if (ret < 0) + goto runtime_err; + + /* one of the four lsb's must be set, and nothing else */ + if (hweight_long(i & 0xf) != 1 || i > 8) { + ret = -EINVAL; + goto runtime_err; + } + + num_locks = i * 32; /* actual number of locks in this device */ + + bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks), + GFP_KERNEL); + if (!bank) { + ret = -ENOMEM; + goto runtime_err; + } + + platform_set_drvdata(pdev, bank); + + for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++) + hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i; + + ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops, + base_id, num_locks); + if (ret) + goto runtime_err; + + dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n", + num_locks); + + return 0; + +runtime_err: + pm_runtime_disable(&pdev->dev); + return ret; +} + +static int omap_hwspinlock_remove(struct platform_device *pdev) +{ + struct hwspinlock_device *bank = platform_get_drvdata(pdev); + int ret; + + ret = hwspin_lock_unregister(bank); + if (ret) { + dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret); + return ret; + } + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id omap_hwspinlock_of_match[] = { + { .compatible = "ti,omap4-hwspinlock", }, + { .compatible = "ti,am654-hwspinlock", }, + { /* end */ }, +}; +MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match); + +static struct platform_driver omap_hwspinlock_driver = { + .probe = omap_hwspinlock_probe, + .remove = omap_hwspinlock_remove, + .driver = { + .name = "omap_hwspinlock", + .of_match_table = of_match_ptr(omap_hwspinlock_of_match), + }, +}; + +static int __init omap_hwspinlock_init(void) +{ + return platform_driver_register(&omap_hwspinlock_driver); +} +/* board init code might need to reserve hwspinlocks for predefined purposes */ +postcore_initcall(omap_hwspinlock_init); + +static void __exit omap_hwspinlock_exit(void) +{ + platform_driver_unregister(&omap_hwspinlock_driver); +} +module_exit(omap_hwspinlock_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hardware spinlock driver for OMAP"); +MODULE_AUTHOR("Simon Que <sque@ti.com>"); +MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>"); +MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>"); |