1 files changed, 829 insertions, 0 deletions

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
new file mode 100644
index 000000000..e25e9bb34
--- /dev/null
+++ b/drivers/mmc/host/pxamci.c
@@ -0,0 +1,829 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/mmc/host/pxa.c - PXA MMCI driver
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ *  This hardware is really sick:
+ *   - No way to clear interrupts.
+ *   - Have to turn off the clock whenever we touch the device.
+ *   - Doesn't tell you how many data blocks were transferred.
+ *  Yuck!
+ *
+ *	1 and 3 byte data transfers not supported
+ *	max block length up to 1023
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/sizes.h>
+
+#include <mach/hardware.h>
+#include <linux/platform_data/mmc-pxamci.h>
+
+#include "pxamci.h"
+
+#define DRIVER_NAME	"pxa2xx-mci"
+
+#define NR_SG	1
+#define CLKRT_OFF	(~0)
+
+#define mmc_has_26MHz()		(cpu_is_pxa300() || cpu_is_pxa310() \
+				|| cpu_is_pxa935())
+
+struct pxamci_host {
+	struct mmc_host		*mmc;
+	spinlock_t		lock;
+	struct resource		*res;
+	void __iomem		*base;
+	struct clk		*clk;
+	unsigned long		clkrate;
+	unsigned int		clkrt;
+	unsigned int		cmdat;
+	unsigned int		imask;
+	unsigned int		power_mode;
+	unsigned long		detect_delay_ms;
+	bool			use_ro_gpio;
+	struct gpio_desc	*power;
+	struct pxamci_platform_data *pdata;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	struct dma_chan		*dma_chan_rx;
+	struct dma_chan		*dma_chan_tx;
+	dma_cookie_t		dma_cookie;
+	unsigned int		dma_len;
+	unsigned int		dma_dir;
+};
+
+static int pxamci_init_ocr(struct pxamci_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int ret;
+
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret < 0)
+		return ret;
+
+	if (IS_ERR(mmc->supply.vmmc)) {
+		/* fall-back to platform data */
+		mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+
+	return 0;
+}
+
+static inline int pxamci_set_power(struct pxamci_host *host,
+				    unsigned char power_mode,
+				    unsigned int vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+	struct regulator *supply = mmc->supply.vmmc;
+
+	if (!IS_ERR(supply))
+		return mmc_regulator_set_ocr(mmc, supply, vdd);
+
+	if (host->power) {
+		bool on = !!((1 << vdd) & host->pdata->ocr_mask);
+		gpiod_set_value(host->power, on);
+	}
+
+	if (host->pdata && host->pdata->setpower)
+		return host->pdata->setpower(mmc_dev(host->mmc), vdd);
+
+	return 0;
+}
+
+static void pxamci_stop_clock(struct pxamci_host *host)
+{
+	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
+		unsigned long timeout = 10000;
+		unsigned int v;
+
+		writel(STOP_CLOCK, host->base + MMC_STRPCL);
+
+		do {
+			v = readl(host->base + MMC_STAT);
+			if (!(v & STAT_CLK_EN))
+				break;
+			udelay(1);
+		} while (timeout--);
+
+		if (v & STAT_CLK_EN)
+			dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
+	}
+}
+
+static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask &= ~mask;
+	writel(host->imask, host->base + MMC_I_MASK);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask |= mask;
+	writel(host->imask, host->base + MMC_I_MASK);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void pxamci_dma_irq(void *param);
+
+static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
+{
+	struct dma_async_tx_descriptor *tx;
+	enum dma_transfer_direction direction;
+	struct dma_slave_config	config;
+	struct dma_chan *chan;
+	unsigned int nob = data->blocks;
+	unsigned long long clks;
+	unsigned int timeout;
+	int ret;
+
+	host->data = data;
+
+	writel(nob, host->base + MMC_NOB);
+	writel(data->blksz, host->base + MMC_BLKLEN);
+
+	clks = (unsigned long long)data->timeout_ns * host->clkrate;
+	do_div(clks, 1000000000UL);
+	timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
+	writel((timeout + 255) / 256, host->base + MMC_RDTO);
+
+	memset(&config, 0, sizeof(config));
+	config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	config.src_addr = host->res->start + MMC_RXFIFO;
+	config.dst_addr = host->res->start + MMC_TXFIFO;
+	config.src_maxburst = 32;
+	config.dst_maxburst = 32;
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		direction = DMA_DEV_TO_MEM;
+		chan = host->dma_chan_rx;
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		direction = DMA_MEM_TO_DEV;
+		chan = host->dma_chan_tx;
+	}
+
+	config.direction = direction;
+
+	ret = dmaengine_slave_config(chan, &config);
+	if (ret < 0) {
+		dev_err(mmc_dev(host->mmc), "dma slave config failed\n");
+		return;
+	}
+
+	host->dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
+				   host->dma_dir);
+
+	tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction,
+				     DMA_PREP_INTERRUPT);
+	if (!tx) {
+		dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n");
+		return;
+	}
+
+	if (!(data->flags & MMC_DATA_READ)) {
+		tx->callback = pxamci_dma_irq;
+		tx->callback_param = host;
+	}
+
+	host->dma_cookie = dmaengine_submit(tx);
+
+	/*
+	 * workaround for erratum #91:
+	 * only start DMA now if we are doing a read,
+	 * otherwise we wait until CMD/RESP has finished
+	 * before starting DMA.
+	 */
+	if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+		dma_async_issue_pending(chan);
+}
+
+static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
+{
+	WARN_ON(host->cmd != NULL);
+	host->cmd = cmd;
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdat |= CMDAT_BUSY;
+
+#define RSP_TYPE(x)	((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+	switch (RSP_TYPE(mmc_resp_type(cmd))) {
+	case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
+		cmdat |= CMDAT_RESP_SHORT;
+		break;
+	case RSP_TYPE(MMC_RSP_R3):
+		cmdat |= CMDAT_RESP_R3;
+		break;
+	case RSP_TYPE(MMC_RSP_R2):
+		cmdat |= CMDAT_RESP_R2;
+		break;
+	default:
+		break;
+	}
+
+	writel(cmd->opcode, host->base + MMC_CMD);
+	writel(cmd->arg >> 16, host->base + MMC_ARGH);
+	writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
+	writel(cmdat, host->base + MMC_CMDAT);
+	writel(host->clkrt, host->base + MMC_CLKRT);
+
+	writel(START_CLOCK, host->base + MMC_STRPCL);
+
+	pxamci_enable_irq(host, END_CMD_RES);
+}
+
+static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
+{
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+	mmc_request_done(host->mmc, mrq);
+}
+
+static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int i;
+	u32 v;
+
+	if (!cmd)
+		return 0;
+
+	host->cmd = NULL;
+
+	/*
+	 * Did I mention this is Sick.  We always need to
+	 * discard the upper 8 bits of the first 16-bit word.
+	 */
+	v = readl(host->base + MMC_RES) & 0xffff;
+	for (i = 0; i < 4; i++) {
+		u32 w1 = readl(host->base + MMC_RES) & 0xffff;
+		u32 w2 = readl(host->base + MMC_RES) & 0xffff;
+		cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
+		v = w2;
+	}
+
+	if (stat & STAT_TIME_OUT_RESPONSE) {
+		cmd->error = -ETIMEDOUT;
+	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+		/*
+		 * workaround for erratum #42:
+		 * Intel PXA27x Family Processor Specification Update Rev 001
+		 * A bogus CRC error can appear if the msb of a 136 bit
+		 * response is a one.
+		 */
+		if (cpu_is_pxa27x() &&
+		    (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
+			pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
+		else
+			cmd->error = -EILSEQ;
+	}
+
+	pxamci_disable_irq(host, END_CMD_RES);
+	if (host->data && !cmd->error) {
+		pxamci_enable_irq(host, DATA_TRAN_DONE);
+		/*
+		 * workaround for erratum #91, if doing write
+		 * enable DMA late
+		 */
+		if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+			dma_async_issue_pending(host->dma_chan_tx);
+	} else {
+		pxamci_finish_request(host, host->mrq);
+	}
+
+	return 1;
+}
+
+static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+	struct dma_chan *chan;
+
+	if (!data)
+		return 0;
+
+	if (data->flags & MMC_DATA_READ)
+		chan = host->dma_chan_rx;
+	else
+		chan = host->dma_chan_tx;
+	dma_unmap_sg(chan->device->dev,
+		     data->sg, data->sg_len, host->dma_dir);
+
+	if (stat & STAT_READ_TIME_OUT)
+		data->error = -ETIMEDOUT;
+	else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
+		data->error = -EILSEQ;
+
+	/*
+	 * There appears to be a hardware design bug here.  There seems to
+	 * be no way to find out how much data was transferred to the card.
+	 * This means that if there was an error on any block, we mark all
+	 * data blocks as being in error.
+	 */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pxamci_disable_irq(host, DATA_TRAN_DONE);
+
+	host->data = NULL;
+	if (host->mrq->stop) {
+		pxamci_stop_clock(host);
+		pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
+	} else {
+		pxamci_finish_request(host, host->mrq);
+	}
+
+	return 1;
+}
+
+static irqreturn_t pxamci_irq(int irq, void *devid)
+{
+	struct pxamci_host *host = devid;
+	unsigned int ireg;
+	int handled = 0;
+
+	ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
+
+	if (ireg) {
+		unsigned stat = readl(host->base + MMC_STAT);
+
+		pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
+
+		if (ireg & END_CMD_RES)
+			handled |= pxamci_cmd_done(host, stat);
+		if (ireg & DATA_TRAN_DONE)
+			handled |= pxamci_data_done(host, stat);
+		if (ireg & SDIO_INT) {
+			mmc_signal_sdio_irq(host->mmc);
+			handled = 1;
+		}
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+	unsigned int cmdat;
+
+	WARN_ON(host->mrq != NULL);
+
+	host->mrq = mrq;
+
+	pxamci_stop_clock(host);
+
+	cmdat = host->cmdat;
+	host->cmdat &= ~CMDAT_INIT;
+
+	if (mrq->data) {
+		pxamci_setup_data(host, mrq->data);
+
+		cmdat &= ~CMDAT_BUSY;
+		cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
+		if (mrq->data->flags & MMC_DATA_WRITE)
+			cmdat |= CMDAT_WRITE;
+	}
+
+	pxamci_start_cmd(host, mrq->cmd, cmdat);
+}
+
+static int pxamci_get_ro(struct mmc_host *mmc)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+
+	if (host->use_ro_gpio)
+		return mmc_gpio_get_ro(mmc);
+	if (host->pdata && host->pdata->get_ro)
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
+}
+
+static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+
+	if (ios->clock) {
+		unsigned long rate = host->clkrate;
+		unsigned int clk = rate / ios->clock;
+
+		if (host->clkrt == CLKRT_OFF)
+			clk_prepare_enable(host->clk);
+
+		if (ios->clock == 26000000) {
+			/* to support 26MHz */
+			host->clkrt = 7;
+		} else {
+			/* to handle (19.5MHz, 26MHz) */
+			if (!clk)
+				clk = 1;
+
+			/*
+			 * clk might result in a lower divisor than we
+			 * desire.  check for that condition and adjust
+			 * as appropriate.
+			 */
+			if (rate / clk > ios->clock)
+				clk <<= 1;
+			host->clkrt = fls(clk) - 1;
+		}
+
+		/*
+		 * we write clkrt on the next command
+		 */
+	} else {
+		pxamci_stop_clock(host);
+		if (host->clkrt != CLKRT_OFF) {
+			host->clkrt = CLKRT_OFF;
+			clk_disable_unprepare(host->clk);
+		}
+	}
+
+	if (host->power_mode != ios->power_mode) {
+		int ret;
+
+		host->power_mode = ios->power_mode;
+
+		ret = pxamci_set_power(host, ios->power_mode, ios->vdd);
+		if (ret) {
+			dev_err(mmc_dev(mmc), "unable to set power\n");
+			/*
+			 * The .set_ios() function in the mmc_host_ops
+			 * struct return void, and failing to set the
+			 * power should be rare so we print an error and
+			 * return here.
+			 */
+			return;
+		}
+
+		if (ios->power_mode == MMC_POWER_ON)
+			host->cmdat |= CMDAT_INIT;
+	}
+
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->cmdat |= CMDAT_SD_4DAT;
+	else
+		host->cmdat &= ~CMDAT_SD_4DAT;
+
+	dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n",
+		host->clkrt, host->cmdat);
+}
+
+static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
+{
+	struct pxamci_host *pxa_host = mmc_priv(host);
+
+	if (enable)
+		pxamci_enable_irq(pxa_host, SDIO_INT);
+	else
+		pxamci_disable_irq(pxa_host, SDIO_INT);
+}
+
+static const struct mmc_host_ops pxamci_ops = {
+	.request		= pxamci_request,
+	.get_cd			= mmc_gpio_get_cd,
+	.get_ro			= pxamci_get_ro,
+	.set_ios		= pxamci_set_ios,
+	.enable_sdio_irq	= pxamci_enable_sdio_irq,
+};
+
+static void pxamci_dma_irq(void *param)
+{
+	struct pxamci_host *host = param;
+	struct dma_tx_state state;
+	enum dma_status status;
+	struct dma_chan *chan;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!host->data)
+		goto out_unlock;
+
+	if (host->data->flags & MMC_DATA_READ)
+		chan = host->dma_chan_rx;
+	else
+		chan = host->dma_chan_tx;
+
+	status = dmaengine_tx_status(chan, host->dma_cookie, &state);
+
+	if (likely(status == DMA_COMPLETE)) {
+		writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
+	} else {
+		pr_err("%s: DMA error on %s channel\n", mmc_hostname(host->mmc),
+			host->data->flags & MMC_DATA_READ ? "rx" : "tx");
+		host->data->error = -EIO;
+		pxamci_data_done(host, 0);
+	}
+
+out_unlock:
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static irqreturn_t pxamci_detect_irq(int irq, void *devid)
+{
+	struct pxamci_host *host = mmc_priv(devid);
+
+	mmc_detect_change(devid, msecs_to_jiffies(host->detect_delay_ms));
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_mmc_dt_ids[] = {
+        { .compatible = "marvell,pxa-mmc" },
+        { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
+
+static int pxamci_of_init(struct platform_device *pdev,
+			  struct mmc_host *mmc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct pxamci_host *host = mmc_priv(mmc);
+	u32 tmp;
+	int ret;
+
+	if (!np)
+		return 0;
+
+	/* pxa-mmc specific */
+	if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
+		host->detect_delay_ms = tmp;
+
+	ret = mmc_of_parse(mmc);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#else
+static int pxamci_of_init(struct platform_device *pdev,
+			  struct mmc_host *mmc)
+{
+        return 0;
+}
+#endif
+
+static int pxamci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct pxamci_host *host = NULL;
+	struct device *dev = &pdev->dev;
+	struct resource *r;
+	int ret, irq;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mmc->ops = &pxamci_ops;
+
+	/*
+	 * We can do SG-DMA, but we don't because we never know how much
+	 * data we successfully wrote to the card.
+	 */
+	mmc->max_segs = NR_SG;
+
+	/*
+	 * Our hardware DMA can handle a maximum of one page per SG entry.
+	 */
+	mmc->max_seg_size = PAGE_SIZE;
+
+	/*
+	 * Block length register is only 10 bits before PXA27x.
+	 */
+	mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
+
+	/*
+	 * Block count register is 16 bits.
+	 */
+	mmc->max_blk_count = 65535;
+
+	ret = pxamci_of_init(pdev, mmc);
+	if (ret)
+		goto out;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdata = pdev->dev.platform_data;
+	host->clkrt = CLKRT_OFF;
+
+	host->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto out;
+	}
+
+	host->clkrate = clk_get_rate(host->clk);
+
+	/*
+	 * Calculate minimum clock rate, rounding up.
+	 */
+	mmc->f_min = (host->clkrate + 63) / 64;
+	mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
+
+	ret = pxamci_init_ocr(host);
+	if (ret < 0)
+		goto out;
+
+	mmc->caps = 0;
+	host->cmdat = 0;
+	if (!cpu_is_pxa25x()) {
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+		host->cmdat |= CMDAT_SDIO_INT_EN;
+		if (mmc_has_26MHz())
+			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
+				     MMC_CAP_SD_HIGHSPEED;
+	}
+
+	spin_lock_init(&host->lock);
+	host->res = r;
+	host->imask = MMC_I_MASK_ALL;
+
+	host->base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
+		goto out;
+	}
+
+	/*
+	 * Ensure that the host controller is shut down, and setup
+	 * with our defaults.
+	 */
+	pxamci_stop_clock(host);
+	writel(0, host->base + MMC_SPI);
+	writel(64, host->base + MMC_RESTO);
+	writel(host->imask, host->base + MMC_I_MASK);
+
+	ret = devm_request_irq(dev, irq, pxamci_irq, 0,
+			       DRIVER_NAME, host);
+	if (ret)
+		goto out;
+
+	platform_set_drvdata(pdev, mmc);
+
+	host->dma_chan_rx = dma_request_chan(dev, "rx");
+	if (IS_ERR(host->dma_chan_rx)) {
+		dev_err(dev, "unable to request rx dma channel\n");
+		ret = PTR_ERR(host->dma_chan_rx);
+		host->dma_chan_rx = NULL;
+		goto out;
+	}
+
+	host->dma_chan_tx = dma_request_chan(dev, "tx");
+	if (IS_ERR(host->dma_chan_tx)) {
+		dev_err(dev, "unable to request tx dma channel\n");
+		ret = PTR_ERR(host->dma_chan_tx);
+		host->dma_chan_tx = NULL;
+		goto out;
+	}
+
+	if (host->pdata) {
+		host->detect_delay_ms = host->pdata->detect_delay_ms;
+
+		host->power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
+		if (IS_ERR(host->power)) {
+			ret = PTR_ERR(host->power);
+			dev_err(dev, "Failed requesting gpio_power\n");
+			goto out;
+		}
+
+		/* FIXME: should we pass detection delay to debounce? */
+		ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Failed requesting gpio_cd\n");
+			goto out;
+		}
+
+		if (!host->pdata->gpio_card_ro_invert)
+			mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+		ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Failed requesting gpio_ro\n");
+			goto out;
+		}
+		if (!ret)
+			host->use_ro_gpio = true;
+
+		if (host->pdata->init)
+			host->pdata->init(dev, pxamci_detect_irq, mmc);
+
+		if (host->power && host->pdata->setpower)
+			dev_warn(dev, "gpio_power and setpower() both defined\n");
+		if (host->use_ro_gpio && host->pdata->get_ro)
+			dev_warn(dev, "gpio_ro and get_ro() both defined\n");
+	}
+
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		if (host->pdata && host->pdata->exit)
+			host->pdata->exit(dev, mmc);
+		goto out;
+	}
+
+	return 0;
+
+out:
+	if (host) {
+		if (host->dma_chan_rx)
+			dma_release_channel(host->dma_chan_rx);
+		if (host->dma_chan_tx)
+			dma_release_channel(host->dma_chan_tx);
+	}
+	if (mmc)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int pxamci_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+	if (mmc) {
+		struct pxamci_host *host = mmc_priv(mmc);
+
+		mmc_remove_host(mmc);
+
+		if (host->pdata && host->pdata->exit)
+			host->pdata->exit(&pdev->dev, mmc);
+
+		pxamci_stop_clock(host);
+		writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
+		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
+		       host->base + MMC_I_MASK);
+
+		dmaengine_terminate_all(host->dma_chan_rx);
+		dmaengine_terminate_all(host->dma_chan_tx);
+		dma_release_channel(host->dma_chan_rx);
+		dma_release_channel(host->dma_chan_tx);
+
+		mmc_free_host(mmc);
+	}
+
+	return 0;
+}
+
+static struct platform_driver pxamci_driver = {
+	.probe		= pxamci_probe,
+	.remove		= pxamci_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
+	},
+};
+
+module_platform_driver(pxamci_driver);
+
+MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-mci");