diff options
Diffstat (limited to 'drivers/net/ethernet/micrel/ksz884x.c')
| -rw-r--r-- | drivers/net/ethernet/micrel/ksz884x.c | 7245 |
1 files changed, 7245 insertions, 0 deletions
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c new file mode 100644 index 000000000..1fa160641 --- /dev/null +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -0,0 +1,7245 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/net/ethernet/micrel/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver + * + * Copyright (c) 2009-2010 Micrel, Inc. + * Tristram Ha <Tristram.Ha@micrel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/mii.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/if_vlan.h> +#include <linux/crc32.h> +#include <linux/sched.h> +#include <linux/slab.h> + + +/* DMA Registers */ + +#define KS_DMA_TX_CTRL 0x0000 +#define DMA_TX_ENABLE 0x00000001 +#define DMA_TX_CRC_ENABLE 0x00000002 +#define DMA_TX_PAD_ENABLE 0x00000004 +#define DMA_TX_LOOPBACK 0x00000100 +#define DMA_TX_FLOW_ENABLE 0x00000200 +#define DMA_TX_CSUM_IP 0x00010000 +#define DMA_TX_CSUM_TCP 0x00020000 +#define DMA_TX_CSUM_UDP 0x00040000 +#define DMA_TX_BURST_SIZE 0x3F000000 + +#define KS_DMA_RX_CTRL 0x0004 +#define DMA_RX_ENABLE 0x00000001 +#define KS884X_DMA_RX_MULTICAST 0x00000002 +#define DMA_RX_PROMISCUOUS 0x00000004 +#define DMA_RX_ERROR 0x00000008 +#define DMA_RX_UNICAST 0x00000010 +#define DMA_RX_ALL_MULTICAST 0x00000020 +#define DMA_RX_BROADCAST 0x00000040 +#define DMA_RX_FLOW_ENABLE 0x00000200 +#define DMA_RX_CSUM_IP 0x00010000 +#define DMA_RX_CSUM_TCP 0x00020000 +#define DMA_RX_CSUM_UDP 0x00040000 +#define DMA_RX_BURST_SIZE 0x3F000000 + +#define DMA_BURST_SHIFT 24 +#define DMA_BURST_DEFAULT 8 + +#define KS_DMA_TX_START 0x0008 +#define KS_DMA_RX_START 0x000C +#define DMA_START 0x00000001 + +#define KS_DMA_TX_ADDR 0x0010 +#define KS_DMA_RX_ADDR 0x0014 + +#define DMA_ADDR_LIST_MASK 0xFFFFFFFC +#define DMA_ADDR_LIST_SHIFT 2 + +/* MTR0 */ +#define KS884X_MULTICAST_0_OFFSET 0x0020 +#define KS884X_MULTICAST_1_OFFSET 0x0021 +#define KS884X_MULTICAST_2_OFFSET 0x0022 +#define KS884x_MULTICAST_3_OFFSET 0x0023 +/* MTR1 */ +#define KS884X_MULTICAST_4_OFFSET 0x0024 +#define KS884X_MULTICAST_5_OFFSET 0x0025 +#define KS884X_MULTICAST_6_OFFSET 0x0026 +#define KS884X_MULTICAST_7_OFFSET 0x0027 + +/* Interrupt Registers */ + +/* INTEN */ +#define KS884X_INTERRUPTS_ENABLE 0x0028 +/* INTST */ +#define KS884X_INTERRUPTS_STATUS 0x002C + +#define KS884X_INT_RX_STOPPED 0x02000000 +#define KS884X_INT_TX_STOPPED 0x04000000 +#define KS884X_INT_RX_OVERRUN 0x08000000 +#define KS884X_INT_TX_EMPTY 0x10000000 +#define KS884X_INT_RX 0x20000000 +#define KS884X_INT_TX 0x40000000 +#define KS884X_INT_PHY 0x80000000 + +#define KS884X_INT_RX_MASK \ + (KS884X_INT_RX | KS884X_INT_RX_OVERRUN) +#define KS884X_INT_TX_MASK \ + (KS884X_INT_TX | KS884X_INT_TX_EMPTY) +#define KS884X_INT_MASK (KS884X_INT_RX | KS884X_INT_TX | KS884X_INT_PHY) + +/* MAC Additional Station Address */ + +/* MAAL0 */ +#define KS_ADD_ADDR_0_LO 0x0080 +/* MAAH0 */ +#define KS_ADD_ADDR_0_HI 0x0084 +/* MAAL1 */ +#define KS_ADD_ADDR_1_LO 0x0088 +/* MAAH1 */ +#define KS_ADD_ADDR_1_HI 0x008C +/* MAAL2 */ +#define KS_ADD_ADDR_2_LO 0x0090 +/* MAAH2 */ +#define KS_ADD_ADDR_2_HI 0x0094 +/* MAAL3 */ +#define KS_ADD_ADDR_3_LO 0x0098 +/* MAAH3 */ +#define KS_ADD_ADDR_3_HI 0x009C +/* MAAL4 */ +#define KS_ADD_ADDR_4_LO 0x00A0 +/* MAAH4 */ +#define KS_ADD_ADDR_4_HI 0x00A4 +/* MAAL5 */ +#define KS_ADD_ADDR_5_LO 0x00A8 +/* MAAH5 */ +#define KS_ADD_ADDR_5_HI 0x00AC +/* MAAL6 */ +#define KS_ADD_ADDR_6_LO 0x00B0 +/* MAAH6 */ +#define KS_ADD_ADDR_6_HI 0x00B4 +/* MAAL7 */ +#define KS_ADD_ADDR_7_LO 0x00B8 +/* MAAH7 */ +#define KS_ADD_ADDR_7_HI 0x00BC +/* MAAL8 */ +#define KS_ADD_ADDR_8_LO 0x00C0 +/* MAAH8 */ +#define KS_ADD_ADDR_8_HI 0x00C4 +/* MAAL9 */ +#define KS_ADD_ADDR_9_LO 0x00C8 +/* MAAH9 */ +#define KS_ADD_ADDR_9_HI 0x00CC +/* MAAL10 */ +#define KS_ADD_ADDR_A_LO 0x00D0 +/* MAAH10 */ +#define KS_ADD_ADDR_A_HI 0x00D4 +/* MAAL11 */ +#define KS_ADD_ADDR_B_LO 0x00D8 +/* MAAH11 */ +#define KS_ADD_ADDR_B_HI 0x00DC +/* MAAL12 */ +#define KS_ADD_ADDR_C_LO 0x00E0 +/* MAAH12 */ +#define KS_ADD_ADDR_C_HI 0x00E4 +/* MAAL13 */ +#define KS_ADD_ADDR_D_LO 0x00E8 +/* MAAH13 */ +#define KS_ADD_ADDR_D_HI 0x00EC +/* MAAL14 */ +#define KS_ADD_ADDR_E_LO 0x00F0 +/* MAAH14 */ +#define KS_ADD_ADDR_E_HI 0x00F4 +/* MAAL15 */ +#define KS_ADD_ADDR_F_LO 0x00F8 +/* MAAH15 */ +#define KS_ADD_ADDR_F_HI 0x00FC + +#define ADD_ADDR_HI_MASK 0x0000FFFF +#define ADD_ADDR_ENABLE 0x80000000 +#define ADD_ADDR_INCR 8 + +/* Miscellaneous Registers */ + +/* MARL */ +#define KS884X_ADDR_0_OFFSET 0x0200 +#define KS884X_ADDR_1_OFFSET 0x0201 +/* MARM */ +#define KS884X_ADDR_2_OFFSET 0x0202 +#define KS884X_ADDR_3_OFFSET 0x0203 +/* MARH */ +#define KS884X_ADDR_4_OFFSET 0x0204 +#define KS884X_ADDR_5_OFFSET 0x0205 + +/* OBCR */ +#define KS884X_BUS_CTRL_OFFSET 0x0210 + +#define BUS_SPEED_125_MHZ 0x0000 +#define BUS_SPEED_62_5_MHZ 0x0001 +#define BUS_SPEED_41_66_MHZ 0x0002 +#define BUS_SPEED_25_MHZ 0x0003 + +/* EEPCR */ +#define KS884X_EEPROM_CTRL_OFFSET 0x0212 + +#define EEPROM_CHIP_SELECT 0x0001 +#define EEPROM_SERIAL_CLOCK 0x0002 +#define EEPROM_DATA_OUT 0x0004 +#define EEPROM_DATA_IN 0x0008 +#define EEPROM_ACCESS_ENABLE 0x0010 + +/* MBIR */ +#define KS884X_MEM_INFO_OFFSET 0x0214 + +#define RX_MEM_TEST_FAILED 0x0008 +#define RX_MEM_TEST_FINISHED 0x0010 +#define TX_MEM_TEST_FAILED 0x0800 +#define TX_MEM_TEST_FINISHED 0x1000 + +/* GCR */ +#define KS884X_GLOBAL_CTRL_OFFSET 0x0216 +#define GLOBAL_SOFTWARE_RESET 0x0001 + +#define KS8841_POWER_MANAGE_OFFSET 0x0218 + +/* WFCR */ +#define KS8841_WOL_CTRL_OFFSET 0x021A +#define KS8841_WOL_MAGIC_ENABLE 0x0080 +#define KS8841_WOL_FRAME3_ENABLE 0x0008 +#define KS8841_WOL_FRAME2_ENABLE 0x0004 +#define KS8841_WOL_FRAME1_ENABLE 0x0002 +#define KS8841_WOL_FRAME0_ENABLE 0x0001 + +/* WF0 */ +#define KS8841_WOL_FRAME_CRC_OFFSET 0x0220 +#define KS8841_WOL_FRAME_BYTE0_OFFSET 0x0224 +#define KS8841_WOL_FRAME_BYTE2_OFFSET 0x0228 + +/* IACR */ +#define KS884X_IACR_P 0x04A0 +#define KS884X_IACR_OFFSET KS884X_IACR_P + +/* IADR1 */ +#define KS884X_IADR1_P 0x04A2 +#define KS884X_IADR2_P 0x04A4 +#define KS884X_IADR3_P 0x04A6 +#define KS884X_IADR4_P 0x04A8 +#define KS884X_IADR5_P 0x04AA + +#define KS884X_ACC_CTRL_SEL_OFFSET KS884X_IACR_P +#define KS884X_ACC_CTRL_INDEX_OFFSET (KS884X_ACC_CTRL_SEL_OFFSET + 1) + +#define KS884X_ACC_DATA_0_OFFSET KS884X_IADR4_P +#define KS884X_ACC_DATA_1_OFFSET (KS884X_ACC_DATA_0_OFFSET + 1) +#define KS884X_ACC_DATA_2_OFFSET KS884X_IADR5_P +#define KS884X_ACC_DATA_3_OFFSET (KS884X_ACC_DATA_2_OFFSET + 1) +#define KS884X_ACC_DATA_4_OFFSET KS884X_IADR2_P +#define KS884X_ACC_DATA_5_OFFSET (KS884X_ACC_DATA_4_OFFSET + 1) +#define KS884X_ACC_DATA_6_OFFSET KS884X_IADR3_P +#define KS884X_ACC_DATA_7_OFFSET (KS884X_ACC_DATA_6_OFFSET + 1) +#define KS884X_ACC_DATA_8_OFFSET KS884X_IADR1_P + +/* P1MBCR */ +#define KS884X_P1MBCR_P 0x04D0 +#define KS884X_P1MBSR_P 0x04D2 +#define KS884X_PHY1ILR_P 0x04D4 +#define KS884X_PHY1IHR_P 0x04D6 +#define KS884X_P1ANAR_P 0x04D8 +#define KS884X_P1ANLPR_P 0x04DA + +/* P2MBCR */ +#define KS884X_P2MBCR_P 0x04E0 +#define KS884X_P2MBSR_P 0x04E2 +#define KS884X_PHY2ILR_P 0x04E4 +#define KS884X_PHY2IHR_P 0x04E6 +#define KS884X_P2ANAR_P 0x04E8 +#define KS884X_P2ANLPR_P 0x04EA + +#define KS884X_PHY_1_CTRL_OFFSET KS884X_P1MBCR_P +#define PHY_CTRL_INTERVAL (KS884X_P2MBCR_P - KS884X_P1MBCR_P) + +#define KS884X_PHY_CTRL_OFFSET 0x00 + +/* Mode Control Register */ +#define PHY_REG_CTRL 0 + +#define PHY_RESET 0x8000 +#define PHY_LOOPBACK 0x4000 +#define PHY_SPEED_100MBIT 0x2000 +#define PHY_AUTO_NEG_ENABLE 0x1000 +#define PHY_POWER_DOWN 0x0800 +#define PHY_MII_DISABLE 0x0400 +#define PHY_AUTO_NEG_RESTART 0x0200 +#define PHY_FULL_DUPLEX 0x0100 +#define PHY_COLLISION_TEST 0x0080 +#define PHY_HP_MDIX 0x0020 +#define PHY_FORCE_MDIX 0x0010 +#define PHY_AUTO_MDIX_DISABLE 0x0008 +#define PHY_REMOTE_FAULT_DISABLE 0x0004 +#define PHY_TRANSMIT_DISABLE 0x0002 +#define PHY_LED_DISABLE 0x0001 + +#define KS884X_PHY_STATUS_OFFSET 0x02 + +/* Mode Status Register */ +#define PHY_REG_STATUS 1 + +#define PHY_100BT4_CAPABLE 0x8000 +#define PHY_100BTX_FD_CAPABLE 0x4000 +#define PHY_100BTX_CAPABLE 0x2000 +#define PHY_10BT_FD_CAPABLE 0x1000 +#define PHY_10BT_CAPABLE 0x0800 +#define PHY_MII_SUPPRESS_CAPABLE 0x0040 +#define PHY_AUTO_NEG_ACKNOWLEDGE 0x0020 +#define PHY_REMOTE_FAULT 0x0010 +#define PHY_AUTO_NEG_CAPABLE 0x0008 +#define PHY_LINK_STATUS 0x0004 +#define PHY_JABBER_DETECT 0x0002 +#define PHY_EXTENDED_CAPABILITY 0x0001 + +#define KS884X_PHY_ID_1_OFFSET 0x04 +#define KS884X_PHY_ID_2_OFFSET 0x06 + +/* PHY Identifier Registers */ +#define PHY_REG_ID_1 2 +#define PHY_REG_ID_2 3 + +#define KS884X_PHY_AUTO_NEG_OFFSET 0x08 + +/* Auto-Negotiation Advertisement Register */ +#define PHY_REG_AUTO_NEGOTIATION 4 + +#define PHY_AUTO_NEG_NEXT_PAGE 0x8000 +#define PHY_AUTO_NEG_REMOTE_FAULT 0x2000 +/* Not supported. */ +#define PHY_AUTO_NEG_ASYM_PAUSE 0x0800 +#define PHY_AUTO_NEG_SYM_PAUSE 0x0400 +#define PHY_AUTO_NEG_100BT4 0x0200 +#define PHY_AUTO_NEG_100BTX_FD 0x0100 +#define PHY_AUTO_NEG_100BTX 0x0080 +#define PHY_AUTO_NEG_10BT_FD 0x0040 +#define PHY_AUTO_NEG_10BT 0x0020 +#define PHY_AUTO_NEG_SELECTOR 0x001F +#define PHY_AUTO_NEG_802_3 0x0001 + +#define PHY_AUTO_NEG_PAUSE (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE) + +#define KS884X_PHY_REMOTE_CAP_OFFSET 0x0A + +/* Auto-Negotiation Link Partner Ability Register */ +#define PHY_REG_REMOTE_CAPABILITY 5 + +#define PHY_REMOTE_NEXT_PAGE 0x8000 +#define PHY_REMOTE_ACKNOWLEDGE 0x4000 +#define PHY_REMOTE_REMOTE_FAULT 0x2000 +#define PHY_REMOTE_SYM_PAUSE 0x0400 +#define PHY_REMOTE_100BTX_FD 0x0100 +#define PHY_REMOTE_100BTX 0x0080 +#define PHY_REMOTE_10BT_FD 0x0040 +#define PHY_REMOTE_10BT 0x0020 + +/* P1VCT */ +#define KS884X_P1VCT_P 0x04F0 +#define KS884X_P1PHYCTRL_P 0x04F2 + +/* P2VCT */ +#define KS884X_P2VCT_P 0x04F4 +#define KS884X_P2PHYCTRL_P 0x04F6 + +#define KS884X_PHY_SPECIAL_OFFSET KS884X_P1VCT_P +#define PHY_SPECIAL_INTERVAL (KS884X_P2VCT_P - KS884X_P1VCT_P) + +#define KS884X_PHY_LINK_MD_OFFSET 0x00 + +#define PHY_START_CABLE_DIAG 0x8000 +#define PHY_CABLE_DIAG_RESULT 0x6000 +#define PHY_CABLE_STAT_NORMAL 0x0000 +#define PHY_CABLE_STAT_OPEN 0x2000 +#define PHY_CABLE_STAT_SHORT 0x4000 +#define PHY_CABLE_STAT_FAILED 0x6000 +#define PHY_CABLE_10M_SHORT 0x1000 +#define PHY_CABLE_FAULT_COUNTER 0x01FF + +#define KS884X_PHY_PHY_CTRL_OFFSET 0x02 + +#define PHY_STAT_REVERSED_POLARITY 0x0020 +#define PHY_STAT_MDIX 0x0010 +#define PHY_FORCE_LINK 0x0008 +#define PHY_POWER_SAVING_DISABLE 0x0004 +#define PHY_REMOTE_LOOPBACK 0x0002 + +/* SIDER */ +#define KS884X_SIDER_P 0x0400 +#define KS884X_CHIP_ID_OFFSET KS884X_SIDER_P +#define KS884X_FAMILY_ID_OFFSET (KS884X_CHIP_ID_OFFSET + 1) + +#define REG_FAMILY_ID 0x88 + +#define REG_CHIP_ID_41 0x8810 +#define REG_CHIP_ID_42 0x8800 + +#define KS884X_CHIP_ID_MASK_41 0xFF10 +#define KS884X_CHIP_ID_MASK 0xFFF0 +#define KS884X_CHIP_ID_SHIFT 4 +#define KS884X_REVISION_MASK 0x000E +#define KS884X_REVISION_SHIFT 1 +#define KS8842_START 0x0001 + +#define CHIP_IP_41_M 0x8810 +#define CHIP_IP_42_M 0x8800 +#define CHIP_IP_61_M 0x8890 +#define CHIP_IP_62_M 0x8880 + +#define CHIP_IP_41_P 0x8850 +#define CHIP_IP_42_P 0x8840 +#define CHIP_IP_61_P 0x88D0 +#define CHIP_IP_62_P 0x88C0 + +/* SGCR1 */ +#define KS8842_SGCR1_P 0x0402 +#define KS8842_SWITCH_CTRL_1_OFFSET KS8842_SGCR1_P + +#define SWITCH_PASS_ALL 0x8000 +#define SWITCH_TX_FLOW_CTRL 0x2000 +#define SWITCH_RX_FLOW_CTRL 0x1000 +#define SWITCH_CHECK_LENGTH 0x0800 +#define SWITCH_AGING_ENABLE 0x0400 +#define SWITCH_FAST_AGING 0x0200 +#define SWITCH_AGGR_BACKOFF 0x0100 +#define SWITCH_PASS_PAUSE 0x0008 +#define SWITCH_LINK_AUTO_AGING 0x0001 + +/* SGCR2 */ +#define KS8842_SGCR2_P 0x0404 +#define KS8842_SWITCH_CTRL_2_OFFSET KS8842_SGCR2_P + +#define SWITCH_VLAN_ENABLE 0x8000 +#define SWITCH_IGMP_SNOOP 0x4000 +#define IPV6_MLD_SNOOP_ENABLE 0x2000 +#define IPV6_MLD_SNOOP_OPTION 0x1000 +#define PRIORITY_SCHEME_SELECT 0x0800 +#define SWITCH_MIRROR_RX_TX 0x0100 +#define UNICAST_VLAN_BOUNDARY 0x0080 +#define MULTICAST_STORM_DISABLE 0x0040 +#define SWITCH_BACK_PRESSURE 0x0020 +#define FAIR_FLOW_CTRL 0x0010 +#define NO_EXC_COLLISION_DROP 0x0008 +#define SWITCH_HUGE_PACKET 0x0004 +#define SWITCH_LEGAL_PACKET 0x0002 +#define SWITCH_BUF_RESERVE 0x0001 + +/* SGCR3 */ +#define KS8842_SGCR3_P 0x0406 +#define KS8842_SWITCH_CTRL_3_OFFSET KS8842_SGCR3_P + +#define BROADCAST_STORM_RATE_LO 0xFF00 +#define SWITCH_REPEATER 0x0080 +#define SWITCH_HALF_DUPLEX 0x0040 +#define SWITCH_FLOW_CTRL 0x0020 +#define SWITCH_10_MBIT 0x0010 +#define SWITCH_REPLACE_NULL_VID 0x0008 +#define BROADCAST_STORM_RATE_HI 0x0007 + +#define BROADCAST_STORM_RATE 0x07FF + +/* SGCR4 */ +#define KS8842_SGCR4_P 0x0408 + +/* SGCR5 */ +#define KS8842_SGCR5_P 0x040A +#define KS8842_SWITCH_CTRL_5_OFFSET KS8842_SGCR5_P + +#define LED_MODE 0x8200 +#define LED_SPEED_DUPLEX_ACT 0x0000 +#define LED_SPEED_DUPLEX_LINK_ACT 0x8000 +#define LED_DUPLEX_10_100 0x0200 + +/* SGCR6 */ +#define KS8842_SGCR6_P 0x0410 +#define KS8842_SWITCH_CTRL_6_OFFSET KS8842_SGCR6_P + +#define KS8842_PRIORITY_MASK 3 +#define KS8842_PRIORITY_SHIFT 2 + +/* SGCR7 */ +#define KS8842_SGCR7_P 0x0412 +#define KS8842_SWITCH_CTRL_7_OFFSET KS8842_SGCR7_P + +#define SWITCH_UNK_DEF_PORT_ENABLE 0x0008 +#define SWITCH_UNK_DEF_PORT_3 0x0004 +#define SWITCH_UNK_DEF_PORT_2 0x0002 +#define SWITCH_UNK_DEF_PORT_1 0x0001 + +/* MACAR1 */ +#define KS8842_MACAR1_P 0x0470 +#define KS8842_MACAR2_P 0x0472 +#define KS8842_MACAR3_P 0x0474 +#define KS8842_MAC_ADDR_1_OFFSET KS8842_MACAR1_P +#define KS8842_MAC_ADDR_0_OFFSET (KS8842_MAC_ADDR_1_OFFSET + 1) +#define KS8842_MAC_ADDR_3_OFFSET KS8842_MACAR2_P +#define KS8842_MAC_ADDR_2_OFFSET (KS8842_MAC_ADDR_3_OFFSET + 1) +#define KS8842_MAC_ADDR_5_OFFSET KS8842_MACAR3_P +#define KS8842_MAC_ADDR_4_OFFSET (KS8842_MAC_ADDR_5_OFFSET + 1) + +/* TOSR1 */ +#define KS8842_TOSR1_P 0x0480 +#define KS8842_TOSR2_P 0x0482 +#define KS8842_TOSR3_P 0x0484 +#define KS8842_TOSR4_P 0x0486 +#define KS8842_TOSR5_P 0x0488 +#define KS8842_TOSR6_P 0x048A +#define KS8842_TOSR7_P 0x0490 +#define KS8842_TOSR8_P 0x0492 +#define KS8842_TOS_1_OFFSET KS8842_TOSR1_P +#define KS8842_TOS_2_OFFSET KS8842_TOSR2_P +#define KS8842_TOS_3_OFFSET KS8842_TOSR3_P +#define KS8842_TOS_4_OFFSET KS8842_TOSR4_P +#define KS8842_TOS_5_OFFSET KS8842_TOSR5_P +#define KS8842_TOS_6_OFFSET KS8842_TOSR6_P + +#define KS8842_TOS_7_OFFSET KS8842_TOSR7_P +#define KS8842_TOS_8_OFFSET KS8842_TOSR8_P + +/* P1CR1 */ +#define KS8842_P1CR1_P 0x0500 +#define KS8842_P1CR2_P 0x0502 +#define KS8842_P1VIDR_P 0x0504 +#define KS8842_P1CR3_P 0x0506 +#define KS8842_P1IRCR_P 0x0508 +#define KS8842_P1ERCR_P 0x050A +#define KS884X_P1SCSLMD_P 0x0510 +#define KS884X_P1CR4_P 0x0512 +#define KS884X_P1SR_P 0x0514 + +/* P2CR1 */ +#define KS8842_P2CR1_P 0x0520 +#define KS8842_P2CR2_P 0x0522 +#define KS8842_P2VIDR_P 0x0524 +#define KS8842_P2CR3_P 0x0526 +#define KS8842_P2IRCR_P 0x0528 +#define KS8842_P2ERCR_P 0x052A +#define KS884X_P2SCSLMD_P 0x0530 +#define KS884X_P2CR4_P 0x0532 +#define KS884X_P2SR_P 0x0534 + +/* P3CR1 */ +#define KS8842_P3CR1_P 0x0540 +#define KS8842_P3CR2_P 0x0542 +#define KS8842_P3VIDR_P 0x0544 +#define KS8842_P3CR3_P 0x0546 +#define KS8842_P3IRCR_P 0x0548 +#define KS8842_P3ERCR_P 0x054A + +#define KS8842_PORT_1_CTRL_1 KS8842_P1CR1_P +#define KS8842_PORT_2_CTRL_1 KS8842_P2CR1_P +#define KS8842_PORT_3_CTRL_1 KS8842_P3CR1_P + +#define PORT_CTRL_ADDR(port, addr) \ + (addr = KS8842_PORT_1_CTRL_1 + (port) * \ + (KS8842_PORT_2_CTRL_1 - KS8842_PORT_1_CTRL_1)) + +#define KS8842_PORT_CTRL_1_OFFSET 0x00 + +#define PORT_BROADCAST_STORM 0x0080 +#define PORT_DIFFSERV_ENABLE 0x0040 +#define PORT_802_1P_ENABLE 0x0020 +#define PORT_BASED_PRIORITY_MASK 0x0018 +#define PORT_BASED_PRIORITY_BASE 0x0003 +#define PORT_BASED_PRIORITY_SHIFT 3 +#define PORT_BASED_PRIORITY_0 0x0000 +#define PORT_BASED_PRIORITY_1 0x0008 +#define PORT_BASED_PRIORITY_2 0x0010 +#define PORT_BASED_PRIORITY_3 0x0018 +#define PORT_INSERT_TAG 0x0004 +#define PORT_REMOVE_TAG 0x0002 +#define PORT_PRIO_QUEUE_ENABLE 0x0001 + +#define KS8842_PORT_CTRL_2_OFFSET 0x02 + +#define PORT_INGRESS_VLAN_FILTER 0x4000 +#define PORT_DISCARD_NON_VID 0x2000 +#define PORT_FORCE_FLOW_CTRL 0x1000 +#define PORT_BACK_PRESSURE 0x0800 +#define PORT_TX_ENABLE 0x0400 +#define PORT_RX_ENABLE 0x0200 +#define PORT_LEARN_DISABLE 0x0100 +#define PORT_MIRROR_SNIFFER 0x0080 +#define PORT_MIRROR_RX 0x0040 +#define PORT_MIRROR_TX 0x0020 +#define PORT_USER_PRIORITY_CEILING 0x0008 +#define PORT_VLAN_MEMBERSHIP 0x0007 + +#define KS8842_PORT_CTRL_VID_OFFSET 0x04 + +#define PORT_DEFAULT_VID 0x0001 + +#define KS8842_PORT_CTRL_3_OFFSET 0x06 + +#define PORT_INGRESS_LIMIT_MODE 0x000C +#define PORT_INGRESS_ALL 0x0000 +#define PORT_INGRESS_UNICAST 0x0004 +#define PORT_INGRESS_MULTICAST 0x0008 +#define PORT_INGRESS_BROADCAST 0x000C +#define PORT_COUNT_IFG 0x0002 +#define PORT_COUNT_PREAMBLE 0x0001 + +#define KS8842_PORT_IN_RATE_OFFSET 0x08 +#define KS8842_PORT_OUT_RATE_OFFSET 0x0A + +#define PORT_PRIORITY_RATE 0x0F +#define PORT_PRIORITY_RATE_SHIFT 4 + +#define KS884X_PORT_LINK_MD 0x10 + +#define PORT_CABLE_10M_SHORT 0x8000 +#define PORT_CABLE_DIAG_RESULT 0x6000 +#define PORT_CABLE_STAT_NORMAL 0x0000 +#define PORT_CABLE_STAT_OPEN 0x2000 +#define PORT_CABLE_STAT_SHORT 0x4000 +#define PORT_CABLE_STAT_FAILED 0x6000 +#define PORT_START_CABLE_DIAG 0x1000 +#define PORT_FORCE_LINK 0x0800 +#define PORT_POWER_SAVING_DISABLE 0x0400 +#define PORT_PHY_REMOTE_LOOPBACK 0x0200 +#define PORT_CABLE_FAULT_COUNTER 0x01FF + +#define KS884X_PORT_CTRL_4_OFFSET 0x12 + +#define PORT_LED_OFF 0x8000 +#define PORT_TX_DISABLE 0x4000 +#define PORT_AUTO_NEG_RESTART 0x2000 +#define PORT_REMOTE_FAULT_DISABLE 0x1000 +#define PORT_POWER_DOWN 0x0800 +#define PORT_AUTO_MDIX_DISABLE 0x0400 +#define PORT_FORCE_MDIX 0x0200 +#define PORT_LOOPBACK 0x0100 +#define PORT_AUTO_NEG_ENABLE 0x0080 +#define PORT_FORCE_100_MBIT 0x0040 +#define PORT_FORCE_FULL_DUPLEX 0x0020 +#define PORT_AUTO_NEG_SYM_PAUSE 0x0010 +#define PORT_AUTO_NEG_100BTX_FD 0x0008 +#define PORT_AUTO_NEG_100BTX 0x0004 +#define PORT_AUTO_NEG_10BT_FD 0x0002 +#define PORT_AUTO_NEG_10BT 0x0001 + +#define KS884X_PORT_STATUS_OFFSET 0x14 + +#define PORT_HP_MDIX 0x8000 +#define PORT_REVERSED_POLARITY 0x2000 +#define PORT_RX_FLOW_CTRL 0x0800 +#define PORT_TX_FLOW_CTRL 0x1000 +#define PORT_STATUS_SPEED_100MBIT 0x0400 +#define PORT_STATUS_FULL_DUPLEX 0x0200 +#define PORT_REMOTE_FAULT 0x0100 +#define PORT_MDIX_STATUS 0x0080 +#define PORT_AUTO_NEG_COMPLETE 0x0040 +#define PORT_STATUS_LINK_GOOD 0x0020 +#define PORT_REMOTE_SYM_PAUSE 0x0010 +#define PORT_REMOTE_100BTX_FD 0x0008 +#define PORT_REMOTE_100BTX 0x0004 +#define PORT_REMOTE_10BT_FD 0x0002 +#define PORT_REMOTE_10BT 0x0001 + +/* +#define STATIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF +#define STATIC_MAC_TABLE_FWD_PORTS 00-00070000-00000000 +#define STATIC_MAC_TABLE_VALID 00-00080000-00000000 +#define STATIC_MAC_TABLE_OVERRIDE 00-00100000-00000000 +#define STATIC_MAC_TABLE_USE_FID 00-00200000-00000000 +#define STATIC_MAC_TABLE_FID 00-03C00000-00000000 +*/ + +#define STATIC_MAC_TABLE_ADDR 0x0000FFFF +#define STATIC_MAC_TABLE_FWD_PORTS 0x00070000 +#define STATIC_MAC_TABLE_VALID 0x00080000 +#define STATIC_MAC_TABLE_OVERRIDE 0x00100000 +#define STATIC_MAC_TABLE_USE_FID 0x00200000 +#define STATIC_MAC_TABLE_FID 0x03C00000 + +#define STATIC_MAC_FWD_PORTS_SHIFT 16 +#define STATIC_MAC_FID_SHIFT 22 + +/* +#define VLAN_TABLE_VID 00-00000000-00000FFF +#define VLAN_TABLE_FID 00-00000000-0000F000 +#define VLAN_TABLE_MEMBERSHIP 00-00000000-00070000 +#define VLAN_TABLE_VALID 00-00000000-00080000 +*/ + +#define VLAN_TABLE_VID 0x00000FFF +#define VLAN_TABLE_FID 0x0000F000 +#define VLAN_TABLE_MEMBERSHIP 0x00070000 +#define VLAN_TABLE_VALID 0x00080000 + +#define VLAN_TABLE_FID_SHIFT 12 +#define VLAN_TABLE_MEMBERSHIP_SHIFT 16 + +/* +#define DYNAMIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF +#define DYNAMIC_MAC_TABLE_FID 00-000F0000-00000000 +#define DYNAMIC_MAC_TABLE_SRC_PORT 00-00300000-00000000 +#define DYNAMIC_MAC_TABLE_TIMESTAMP 00-00C00000-00000000 +#define DYNAMIC_MAC_TABLE_ENTRIES 03-FF000000-00000000 +#define DYNAMIC_MAC_TABLE_MAC_EMPTY 04-00000000-00000000 +#define DYNAMIC_MAC_TABLE_RESERVED 78-00000000-00000000 +#define DYNAMIC_MAC_TABLE_NOT_READY 80-00000000-00000000 +*/ + +#define DYNAMIC_MAC_TABLE_ADDR 0x0000FFFF +#define DYNAMIC_MAC_TABLE_FID 0x000F0000 +#define DYNAMIC_MAC_TABLE_SRC_PORT 0x00300000 +#define DYNAMIC_MAC_TABLE_TIMESTAMP 0x00C00000 +#define DYNAMIC_MAC_TABLE_ENTRIES 0xFF000000 + +#define DYNAMIC_MAC_TABLE_ENTRIES_H 0x03 +#define DYNAMIC_MAC_TABLE_MAC_EMPTY 0x04 +#define DYNAMIC_MAC_TABLE_RESERVED 0x78 +#define DYNAMIC_MAC_TABLE_NOT_READY 0x80 + +#define DYNAMIC_MAC_FID_SHIFT 16 +#define DYNAMIC_MAC_SRC_PORT_SHIFT 20 +#define DYNAMIC_MAC_TIMESTAMP_SHIFT 22 +#define DYNAMIC_MAC_ENTRIES_SHIFT 24 +#define DYNAMIC_MAC_ENTRIES_H_SHIFT 8 + +/* +#define MIB_COUNTER_VALUE 00-00000000-3FFFFFFF +#define MIB_COUNTER_VALID 00-00000000-40000000 +#define MIB_COUNTER_OVERFLOW 00-00000000-80000000 +*/ + +#define MIB_COUNTER_VALUE 0x3FFFFFFF +#define MIB_COUNTER_VALID 0x40000000 +#define MIB_COUNTER_OVERFLOW 0x80000000 + +#define MIB_PACKET_DROPPED 0x0000FFFF + +#define KS_MIB_PACKET_DROPPED_TX_0 0x100 +#define KS_MIB_PACKET_DROPPED_TX_1 0x101 +#define KS_MIB_PACKET_DROPPED_TX 0x102 +#define KS_MIB_PACKET_DROPPED_RX_0 0x103 +#define KS_MIB_PACKET_DROPPED_RX_1 0x104 +#define KS_MIB_PACKET_DROPPED_RX 0x105 + +/* Change default LED mode. */ +#define SET_DEFAULT_LED LED_SPEED_DUPLEX_ACT + +#define MAC_ADDR_ORDER(i) (ETH_ALEN - 1 - (i)) + +#define MAX_ETHERNET_BODY_SIZE 1500 +#define ETHERNET_HEADER_SIZE (14 + VLAN_HLEN) + +#define MAX_ETHERNET_PACKET_SIZE \ + (MAX_ETHERNET_BODY_SIZE + ETHERNET_HEADER_SIZE) + +#define REGULAR_RX_BUF_SIZE (MAX_ETHERNET_PACKET_SIZE + 4) +#define MAX_RX_BUF_SIZE (1912 + 4) + +#define ADDITIONAL_ENTRIES 16 +#define MAX_MULTICAST_LIST 32 + +#define HW_MULTICAST_SIZE 8 + +#define HW_TO_DEV_PORT(port) (port - 1) + +enum { + media_connected, + media_disconnected +}; + +enum { + OID_COUNTER_UNKOWN, + + OID_COUNTER_FIRST, + + /* total transmit errors */ + OID_COUNTER_XMIT_ERROR, + + /* total receive errors */ + OID_COUNTER_RCV_ERROR, + + OID_COUNTER_LAST +}; + +/* + * Hardware descriptor definitions + */ + +#define DESC_ALIGNMENT 16 +#define BUFFER_ALIGNMENT 8 + +#define NUM_OF_RX_DESC 64 +#define NUM_OF_TX_DESC 64 + +#define KS_DESC_RX_FRAME_LEN 0x000007FF +#define KS_DESC_RX_FRAME_TYPE 0x00008000 +#define KS_DESC_RX_ERROR_CRC 0x00010000 +#define KS_DESC_RX_ERROR_RUNT 0x00020000 +#define KS_DESC_RX_ERROR_TOO_LONG 0x00040000 +#define KS_DESC_RX_ERROR_PHY 0x00080000 +#define KS884X_DESC_RX_PORT_MASK 0x00300000 +#define KS_DESC_RX_MULTICAST 0x01000000 +#define KS_DESC_RX_ERROR 0x02000000 +#define KS_DESC_RX_ERROR_CSUM_UDP 0x04000000 +#define KS_DESC_RX_ERROR_CSUM_TCP 0x08000000 +#define KS_DESC_RX_ERROR_CSUM_IP 0x10000000 +#define KS_DESC_RX_LAST 0x20000000 +#define KS_DESC_RX_FIRST 0x40000000 +#define KS_DESC_RX_ERROR_COND \ + (KS_DESC_RX_ERROR_CRC | \ + KS_DESC_RX_ERROR_RUNT | \ + KS_DESC_RX_ERROR_PHY | \ + KS_DESC_RX_ERROR_TOO_LONG) + +#define KS_DESC_HW_OWNED 0x80000000 + +#define KS_DESC_BUF_SIZE 0x000007FF +#define KS884X_DESC_TX_PORT_MASK 0x00300000 +#define KS_DESC_END_OF_RING 0x02000000 +#define KS_DESC_TX_CSUM_GEN_UDP 0x04000000 +#define KS_DESC_TX_CSUM_GEN_TCP 0x08000000 +#define KS_DESC_TX_CSUM_GEN_IP 0x10000000 +#define KS_DESC_TX_LAST 0x20000000 +#define KS_DESC_TX_FIRST 0x40000000 +#define KS_DESC_TX_INTERRUPT 0x80000000 + +#define KS_DESC_PORT_SHIFT 20 + +#define KS_DESC_RX_MASK (KS_DESC_BUF_SIZE) + +#define KS_DESC_TX_MASK \ + (KS_DESC_TX_INTERRUPT | \ + KS_DESC_TX_FIRST | \ + KS_DESC_TX_LAST | \ + KS_DESC_TX_CSUM_GEN_IP | \ + KS_DESC_TX_CSUM_GEN_TCP | \ + KS_DESC_TX_CSUM_GEN_UDP | \ + KS_DESC_BUF_SIZE) + +struct ksz_desc_rx_stat { +#ifdef __BIG_ENDIAN_BITFIELD + u32 hw_owned:1; + u32 first_desc:1; + u32 last_desc:1; + u32 csum_err_ip:1; + u32 csum_err_tcp:1; + u32 csum_err_udp:1; + u32 error:1; + u32 multicast:1; + u32 src_port:4; + u32 err_phy:1; + u32 err_too_long:1; + u32 err_runt:1; + u32 err_crc:1; + u32 frame_type:1; + u32 reserved1:4; + u32 frame_len:11; +#else + u32 frame_len:11; + u32 reserved1:4; + u32 frame_type:1; + u32 err_crc:1; + u32 err_runt:1; + u32 err_too_long:1; + u32 err_phy:1; + u32 src_port:4; + u32 multicast:1; + u32 error:1; + u32 csum_err_udp:1; + u32 csum_err_tcp:1; + u32 csum_err_ip:1; + u32 last_desc:1; + u32 first_desc:1; + u32 hw_owned:1; +#endif +}; + +struct ksz_desc_tx_stat { +#ifdef __BIG_ENDIAN_BITFIELD + u32 hw_owned:1; + u32 reserved1:31; +#else + u32 reserved1:31; + u32 hw_owned:1; +#endif +}; + +struct ksz_desc_rx_buf { +#ifdef __BIG_ENDIAN_BITFIELD + u32 reserved4:6; + u32 end_of_ring:1; + u32 reserved3:14; + u32 buf_size:11; +#else + u32 buf_size:11; + u32 reserved3:14; + u32 end_of_ring:1; + u32 reserved4:6; +#endif +}; + +struct ksz_desc_tx_buf { +#ifdef __BIG_ENDIAN_BITFIELD + u32 intr:1; + u32 first_seg:1; + u32 last_seg:1; + u32 csum_gen_ip:1; + u32 csum_gen_tcp:1; + u32 csum_gen_udp:1; + u32 end_of_ring:1; + u32 reserved4:1; + u32 dest_port:4; + u32 reserved3:9; + u32 buf_size:11; +#else + u32 buf_size:11; + u32 reserved3:9; + u32 dest_port:4; + u32 reserved4:1; + u32 end_of_ring:1; + u32 csum_gen_udp:1; + u32 csum_gen_tcp:1; + u32 csum_gen_ip:1; + u32 last_seg:1; + u32 first_seg:1; + u32 intr:1; +#endif +}; + +union desc_stat { + struct ksz_desc_rx_stat rx; + struct ksz_desc_tx_stat tx; + u32 data; +}; + +union desc_buf { + struct ksz_desc_rx_buf rx; + struct ksz_desc_tx_buf tx; + u32 data; +}; + +/** + * struct ksz_hw_desc - Hardware descriptor data structure + * @ctrl: Descriptor control value. + * @buf: Descriptor buffer value. + * @addr: Physical address of memory buffer. + * @next: Pointer to next hardware descriptor. + */ +struct ksz_hw_desc { + union desc_stat ctrl; + union desc_buf buf; + u32 addr; + u32 next; +}; + +/** + * struct ksz_sw_desc - Software descriptor data structure + * @ctrl: Descriptor control value. + * @buf: Descriptor buffer value. + * @buf_size: Current buffers size value in hardware descriptor. + */ +struct ksz_sw_desc { + union desc_stat ctrl; + union desc_buf buf; + u32 buf_size; +}; + +/** + * struct ksz_dma_buf - OS dependent DMA buffer data structure + * @skb: Associated socket buffer. + * @dma: Associated physical DMA address. + * @len: Actual len used. + */ +struct ksz_dma_buf { + struct sk_buff *skb; + dma_addr_t dma; + int len; +}; + +/** + * struct ksz_desc - Descriptor structure + * @phw: Hardware descriptor pointer to uncached physical memory. + * @sw: Cached memory to hold hardware descriptor values for + * manipulation. + * @dma_buf: Operating system dependent data structure to hold physical + * memory buffer allocation information. + */ +struct ksz_desc { + struct ksz_hw_desc *phw; + struct ksz_sw_desc sw; + struct ksz_dma_buf dma_buf; +}; + +#define DMA_BUFFER(desc) ((struct ksz_dma_buf *)(&(desc)->dma_buf)) + +/** + * struct ksz_desc_info - Descriptor information data structure + * @ring: First descriptor in the ring. + * @cur: Current descriptor being manipulated. + * @ring_virt: First hardware descriptor in the ring. + * @ring_phys: The physical address of the first descriptor of the ring. + * @size: Size of hardware descriptor. + * @alloc: Number of descriptors allocated. + * @avail: Number of descriptors available for use. + * @last: Index for last descriptor released to hardware. + * @next: Index for next descriptor available for use. + * @mask: Mask for index wrapping. + */ +struct ksz_desc_info { + struct ksz_desc *ring; + struct ksz_desc *cur; + struct ksz_hw_desc *ring_virt; + u32 ring_phys; + int size; + int alloc; + int avail; + int last; + int next; + int mask; +}; + +/* + * KSZ8842 switch definitions + */ + +enum { + TABLE_STATIC_MAC = 0, + TABLE_VLAN, + TABLE_DYNAMIC_MAC, + TABLE_MIB +}; + +#define LEARNED_MAC_TABLE_ENTRIES 1024 +#define STATIC_MAC_TABLE_ENTRIES 8 + +/** + * struct ksz_mac_table - Static MAC table data structure + * @mac_addr: MAC address to filter. + * @vid: VID value. + * @fid: FID value. + * @ports: Port membership. + * @override: Override setting. + * @use_fid: FID use setting. + * @valid: Valid setting indicating the entry is being used. + */ +struct ksz_mac_table { + u8 mac_addr[ETH_ALEN]; + u16 vid; + u8 fid; + u8 ports; + u8 override:1; + u8 use_fid:1; + u8 valid:1; +}; + +#define VLAN_TABLE_ENTRIES 16 + +/** + * struct ksz_vlan_table - VLAN table data structure + * @vid: VID value. + * @fid: FID value. + * @member: Port membership. + */ +struct ksz_vlan_table { + u16 vid; + u8 fid; + u8 member; +}; + +#define DIFFSERV_ENTRIES 64 +#define PRIO_802_1P_ENTRIES 8 +#define PRIO_QUEUES 4 + +#define SWITCH_PORT_NUM 2 +#define TOTAL_PORT_NUM (SWITCH_PORT_NUM + 1) +#define HOST_MASK (1 << SWITCH_PORT_NUM) +#define PORT_MASK 7 + +#define MAIN_PORT 0 +#define OTHER_PORT 1 +#define HOST_PORT SWITCH_PORT_NUM + +#define PORT_COUNTER_NUM 0x20 +#define TOTAL_PORT_COUNTER_NUM (PORT_COUNTER_NUM + 2) + +#define MIB_COUNTER_RX_LO_PRIORITY 0x00 +#define MIB_COUNTER_RX_HI_PRIORITY 0x01 +#define MIB_COUNTER_RX_UNDERSIZE 0x02 +#define MIB_COUNTER_RX_FRAGMENT 0x03 +#define MIB_COUNTER_RX_OVERSIZE 0x04 +#define MIB_COUNTER_RX_JABBER 0x05 +#define MIB_COUNTER_RX_SYMBOL_ERR 0x06 +#define MIB_COUNTER_RX_CRC_ERR 0x07 +#define MIB_COUNTER_RX_ALIGNMENT_ERR 0x08 +#define MIB_COUNTER_RX_CTRL_8808 0x09 +#define MIB_COUNTER_RX_PAUSE 0x0A +#define MIB_COUNTER_RX_BROADCAST 0x0B +#define MIB_COUNTER_RX_MULTICAST 0x0C +#define MIB_COUNTER_RX_UNICAST 0x0D +#define MIB_COUNTER_RX_OCTET_64 0x0E +#define MIB_COUNTER_RX_OCTET_65_127 0x0F +#define MIB_COUNTER_RX_OCTET_128_255 0x10 +#define MIB_COUNTER_RX_OCTET_256_511 0x11 +#define MIB_COUNTER_RX_OCTET_512_1023 0x12 +#define MIB_COUNTER_RX_OCTET_1024_1522 0x13 +#define MIB_COUNTER_TX_LO_PRIORITY 0x14 +#define MIB_COUNTER_TX_HI_PRIORITY 0x15 +#define MIB_COUNTER_TX_LATE_COLLISION 0x16 +#define MIB_COUNTER_TX_PAUSE 0x17 +#define MIB_COUNTER_TX_BROADCAST 0x18 +#define MIB_COUNTER_TX_MULTICAST 0x19 +#define MIB_COUNTER_TX_UNICAST 0x1A +#define MIB_COUNTER_TX_DEFERRED 0x1B +#define MIB_COUNTER_TX_TOTAL_COLLISION 0x1C +#define MIB_COUNTER_TX_EXCESS_COLLISION 0x1D +#define MIB_COUNTER_TX_SINGLE_COLLISION 0x1E +#define MIB_COUNTER_TX_MULTI_COLLISION 0x1F + +#define MIB_COUNTER_RX_DROPPED_PACKET 0x20 +#define MIB_COUNTER_TX_DROPPED_PACKET 0x21 + +/** + * struct ksz_port_mib - Port MIB data structure + * @cnt_ptr: Current pointer to MIB counter index. + * @link_down: Indication the link has just gone down. + * @state: Connection status of the port. + * @mib_start: The starting counter index. Some ports do not start at 0. + * @counter: 64-bit MIB counter value. + * @dropped: Temporary buffer to remember last read packet dropped values. + * + * MIB counters needs to be read periodically so that counters do not get + * overflowed and give incorrect values. A right balance is needed to + * satisfy this condition and not waste too much CPU time. + * + * It is pointless to read MIB counters when the port is disconnected. The + * @state provides the connection status so that MIB counters are read only + * when the port is connected. The @link_down indicates the port is just + * disconnected so that all MIB counters are read one last time to update the + * information. + */ +struct ksz_port_mib { + u8 cnt_ptr; + u8 link_down; + u8 state; + u8 mib_start; + + u64 counter[TOTAL_PORT_COUNTER_NUM]; + u32 dropped[2]; +}; + +/** + * struct ksz_port_cfg - Port configuration data structure + * @vid: VID value. + * @member: Port membership. + * @port_prio: Port priority. + * @rx_rate: Receive priority rate. + * @tx_rate: Transmit priority rate. + * @stp_state: Current Spanning Tree Protocol state. + */ +struct ksz_port_cfg { + u16 vid; + u8 member; + u8 port_prio; + u32 rx_rate[PRIO_QUEUES]; + u32 tx_rate[PRIO_QUEUES]; + int stp_state; +}; + +/** + * struct ksz_switch - KSZ8842 switch data structure + * @mac_table: MAC table entries information. + * @vlan_table: VLAN table entries information. + * @port_cfg: Port configuration information. + * @diffserv: DiffServ priority settings. Possible values from 6-bit of ToS + * (bit7 ~ bit2) field. + * @p_802_1p: 802.1P priority settings. Possible values from 3-bit of 802.1p + * Tag priority field. + * @br_addr: Bridge address. Used for STP. + * @other_addr: Other MAC address. Used for multiple network device mode. + * @broad_per: Broadcast storm percentage. + * @member: Current port membership. Used for STP. + */ +struct ksz_switch { + struct ksz_mac_table mac_table[STATIC_MAC_TABLE_ENTRIES]; + struct ksz_vlan_table vlan_table[VLAN_TABLE_ENTRIES]; + struct ksz_port_cfg port_cfg[TOTAL_PORT_NUM]; + + u8 diffserv[DIFFSERV_ENTRIES]; + u8 p_802_1p[PRIO_802_1P_ENTRIES]; + + u8 br_addr[ETH_ALEN]; + u8 other_addr[ETH_ALEN]; + + u8 broad_per; + u8 member; +}; + +#define TX_RATE_UNIT 10000 + +/** + * struct ksz_port_info - Port information data structure + * @state: Connection status of the port. + * @tx_rate: Transmit rate divided by 10000 to get Mbit. + * @duplex: Duplex mode. + * @advertised: Advertised auto-negotiation setting. Used to determine link. + * @partner: Auto-negotiation partner setting. Used to determine link. + * @port_id: Port index to access actual hardware register. + * @pdev: Pointer to OS dependent network device. + */ +struct ksz_port_info { + uint state; + uint tx_rate; + u8 duplex; + u8 advertised; + u8 partner; + u8 port_id; + void *pdev; +}; + +#define MAX_TX_HELD_SIZE 52000 + +/* Hardware features and bug fixes. */ +#define LINK_INT_WORKING (1 << 0) +#define SMALL_PACKET_TX_BUG (1 << 1) +#define HALF_DUPLEX_SIGNAL_BUG (1 << 2) +#define RX_HUGE_FRAME (1 << 4) +#define STP_SUPPORT (1 << 8) + +/* Software overrides. */ +#define PAUSE_FLOW_CTRL (1 << 0) +#define FAST_AGING (1 << 1) + +/** + * struct ksz_hw - KSZ884X hardware data structure + * @io: Virtual address assigned. + * @ksz_switch: Pointer to KSZ8842 switch. + * @port_info: Port information. + * @port_mib: Port MIB information. + * @dev_count: Number of network devices this hardware supports. + * @dst_ports: Destination ports in switch for transmission. + * @id: Hardware ID. Used for display only. + * @mib_cnt: Number of MIB counters this hardware has. + * @mib_port_cnt: Number of ports with MIB counters. + * @tx_cfg: Cached transmit control settings. + * @rx_cfg: Cached receive control settings. + * @intr_mask: Current interrupt mask. + * @intr_set: Current interrup set. + * @intr_blocked: Interrupt blocked. + * @rx_desc_info: Receive descriptor information. + * @tx_desc_info: Transmit descriptor information. + * @tx_int_cnt: Transmit interrupt count. Used for TX optimization. + * @tx_int_mask: Transmit interrupt mask. Used for TX optimization. + * @tx_size: Transmit data size. Used for TX optimization. + * The maximum is defined by MAX_TX_HELD_SIZE. + * @perm_addr: Permanent MAC address. + * @override_addr: Overridden MAC address. + * @address: Additional MAC address entries. + * @addr_list_size: Additional MAC address list size. + * @mac_override: Indication of MAC address overridden. + * @promiscuous: Counter to keep track of promiscuous mode set. + * @all_multi: Counter to keep track of all multicast mode set. + * @multi_list: Multicast address entries. + * @multi_bits: Cached multicast hash table settings. + * @multi_list_size: Multicast address list size. + * @enabled: Indication of hardware enabled. + * @rx_stop: Indication of receive process stop. + * @reserved2: none + * @features: Hardware features to enable. + * @overrides: Hardware features to override. + * @parent: Pointer to parent, network device private structure. + */ +struct ksz_hw { + void __iomem *io; + + struct ksz_switch *ksz_switch; + struct ksz_port_info port_info[SWITCH_PORT_NUM]; + struct ksz_port_mib port_mib[TOTAL_PORT_NUM]; + int dev_count; + int dst_ports; + int id; + int mib_cnt; + int mib_port_cnt; + + u32 tx_cfg; + u32 rx_cfg; + u32 intr_mask; + u32 intr_set; + uint intr_blocked; + + struct ksz_desc_info rx_desc_info; + struct ksz_desc_info tx_desc_info; + + int tx_int_cnt; + int tx_int_mask; + int tx_size; + + u8 perm_addr[ETH_ALEN]; + u8 override_addr[ETH_ALEN]; + u8 address[ADDITIONAL_ENTRIES][ETH_ALEN]; + u8 addr_list_size; + u8 mac_override; + u8 promiscuous; + u8 all_multi; + u8 multi_list[MAX_MULTICAST_LIST][ETH_ALEN]; + u8 multi_bits[HW_MULTICAST_SIZE]; + u8 multi_list_size; + + u8 enabled; + u8 rx_stop; + u8 reserved2[1]; + + uint features; + uint overrides; + + void *parent; +}; + +enum { + PHY_NO_FLOW_CTRL, + PHY_FLOW_CTRL, + PHY_TX_ONLY, + PHY_RX_ONLY +}; + +/** + * struct ksz_port - Virtual port data structure + * @duplex: Duplex mode setting. 1 for half duplex, 2 for full + * duplex, and 0 for auto, which normally results in full + * duplex. + * @speed: Speed setting. 10 for 10 Mbit, 100 for 100 Mbit, and + * 0 for auto, which normally results in 100 Mbit. + * @force_link: Force link setting. 0 for auto-negotiation, and 1 for + * force. + * @flow_ctrl: Flow control setting. PHY_NO_FLOW_CTRL for no flow + * control, and PHY_FLOW_CTRL for flow control. + * PHY_TX_ONLY and PHY_RX_ONLY are not supported for 100 + * Mbit PHY. + * @first_port: Index of first port this port supports. + * @mib_port_cnt: Number of ports with MIB counters. + * @port_cnt: Number of ports this port supports. + * @counter: Port statistics counter. + * @hw: Pointer to hardware structure. + * @linked: Pointer to port information linked to this port. + */ +struct ksz_port { + u8 duplex; + u8 speed; + u8 force_link; + u8 flow_ctrl; + + int first_port; + int mib_port_cnt; + int port_cnt; + u64 counter[OID_COUNTER_LAST]; + + struct ksz_hw *hw; + struct ksz_port_info *linked; +}; + +/** + * struct ksz_timer_info - Timer information data structure + * @timer: Kernel timer. + * @cnt: Running timer counter. + * @max: Number of times to run timer; -1 for infinity. + * @period: Timer period in jiffies. + */ +struct ksz_timer_info { + struct timer_list timer; + int cnt; + int max; + int period; +}; + +/** + * struct ksz_shared_mem - OS dependent shared memory data structure + * @dma_addr: Physical DMA address allocated. + * @alloc_size: Allocation size. + * @phys: Actual physical address used. + * @alloc_virt: Virtual address allocated. + * @virt: Actual virtual address used. + */ +struct ksz_shared_mem { + dma_addr_t dma_addr; + uint alloc_size; + uint phys; + u8 *alloc_virt; + u8 *virt; +}; + +/** + * struct ksz_counter_info - OS dependent counter information data structure + * @counter: Wait queue to wakeup after counters are read. + * @time: Next time in jiffies to read counter. + * @read: Indication of counters read in full or not. + */ +struct ksz_counter_info { + wait_queue_head_t counter; + unsigned long time; + int read; +}; + +/** + * struct dev_info - Network device information data structure + * @dev: Pointer to network device. + * @pdev: Pointer to PCI device. + * @hw: Hardware structure. + * @desc_pool: Physical memory used for descriptor pool. + * @hwlock: Spinlock to prevent hardware from accessing. + * @lock: Mutex lock to prevent device from accessing. + * @dev_rcv: Receive process function used. + * @last_skb: Socket buffer allocated for descriptor rx fragments. + * @skb_index: Buffer index for receiving fragments. + * @skb_len: Buffer length for receiving fragments. + * @mib_read: Workqueue to read MIB counters. + * @mib_timer_info: Timer to read MIB counters. + * @counter: Used for MIB reading. + * @mtu: Current MTU used. The default is REGULAR_RX_BUF_SIZE; + * the maximum is MAX_RX_BUF_SIZE. + * @opened: Counter to keep track of device open. + * @rx_tasklet: Receive processing tasklet. + * @tx_tasklet: Transmit processing tasklet. + * @wol_enable: Wake-on-LAN enable set by ethtool. + * @wol_support: Wake-on-LAN support used by ethtool. + * @pme_wait: Used for KSZ8841 power management. + */ +struct dev_info { + struct net_device *dev; + struct pci_dev *pdev; + + struct ksz_hw hw; + struct ksz_shared_mem desc_pool; + + spinlock_t hwlock; + struct mutex lock; + + int (*dev_rcv)(struct dev_info *); + + struct sk_buff *last_skb; + int skb_index; + int skb_len; + + struct work_struct mib_read; + struct ksz_timer_info mib_timer_info; + struct ksz_counter_info counter[TOTAL_PORT_NUM]; + + int mtu; + int opened; + + struct tasklet_struct rx_tasklet; + struct tasklet_struct tx_tasklet; + + int wol_enable; + int wol_support; + unsigned long pme_wait; +}; + +/** + * struct dev_priv - Network device private data structure + * @adapter: Adapter device information. + * @port: Port information. + * @monitor_timer_info: Timer to monitor ports. + * @proc_sem: Semaphore for proc accessing. + * @id: Device ID. + * @mii_if: MII interface information. + * @advertising: Temporary variable to store advertised settings. + * @msg_enable: The message flags controlling driver output. + * @media_state: The connection status of the device. + * @multicast: The all multicast state of the device. + * @promiscuous: The promiscuous state of the device. + */ +struct dev_priv { + struct dev_info *adapter; + struct ksz_port port; + struct ksz_timer_info monitor_timer_info; + + struct semaphore proc_sem; + int id; + + struct mii_if_info mii_if; + u32 advertising; + + u32 msg_enable; + int media_state; + int multicast; + int promiscuous; +}; + +#define DRV_NAME "KSZ884X PCI" +#define DEVICE_NAME "KSZ884x PCI" +#define DRV_VERSION "1.0.0" +#define DRV_RELDATE "Feb 8, 2010" + +static char version[] = + "Micrel " DEVICE_NAME " " DRV_VERSION " (" DRV_RELDATE ")"; + +static u8 DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x88, 0x42, 0x01 }; + +/* + * Interrupt processing primary routines + */ + +static inline void hw_ack_intr(struct ksz_hw *hw, uint interrupt) +{ + writel(interrupt, hw->io + KS884X_INTERRUPTS_STATUS); +} + +static inline void hw_dis_intr(struct ksz_hw *hw) +{ + hw->intr_blocked = hw->intr_mask; + writel(0, hw->io + KS884X_INTERRUPTS_ENABLE); + hw->intr_set = readl(hw->io + KS884X_INTERRUPTS_ENABLE); +} + +static inline void hw_set_intr(struct ksz_hw *hw, uint interrupt) +{ + hw->intr_set = interrupt; + writel(interrupt, hw->io + KS884X_INTERRUPTS_ENABLE); +} + +static inline void hw_ena_intr(struct ksz_hw *hw) +{ + hw->intr_blocked = 0; + hw_set_intr(hw, hw->intr_mask); +} + +static inline void hw_dis_intr_bit(struct ksz_hw *hw, uint bit) +{ + hw->intr_mask &= ~(bit); +} + +static inline void hw_turn_off_intr(struct ksz_hw *hw, uint interrupt) +{ + u32 read_intr; + + read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE); + hw->intr_set = read_intr & ~interrupt; + writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE); + hw_dis_intr_bit(hw, interrupt); +} + +/** + * hw_turn_on_intr - turn on specified interrupts + * @hw: The hardware instance. + * @bit: The interrupt bits to be on. + * + * This routine turns on the specified interrupts in the interrupt mask so that + * those interrupts will be enabled. + */ +static void hw_turn_on_intr(struct ksz_hw *hw, u32 bit) +{ + hw->intr_mask |= bit; + + if (!hw->intr_blocked) + hw_set_intr(hw, hw->intr_mask); +} + +static inline void hw_ena_intr_bit(struct ksz_hw *hw, uint interrupt) +{ + u32 read_intr; + + read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE); + hw->intr_set = read_intr | interrupt; + writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE); +} + +static inline void hw_read_intr(struct ksz_hw *hw, uint *status) +{ + *status = readl(hw->io + KS884X_INTERRUPTS_STATUS); + *status = *status & hw->intr_set; +} + +static inline void hw_restore_intr(struct ksz_hw *hw, uint interrupt) +{ + if (interrupt) + hw_ena_intr(hw); +} + +/** + * hw_block_intr - block hardware interrupts + * @hw: The hardware instance. + * + * This function blocks all interrupts of the hardware and returns the current + * interrupt enable mask so that interrupts can be restored later. + * + * Return the current interrupt enable mask. + */ +static uint hw_block_intr(struct ksz_hw *hw) +{ + uint interrupt = 0; + + if (!hw->intr_blocked) { + hw_dis_intr(hw); + interrupt = hw->intr_blocked; + } + return interrupt; +} + +/* + * Hardware descriptor routines + */ + +static inline void reset_desc(struct ksz_desc *desc, union desc_stat status) +{ + status.rx.hw_owned = 0; + desc->phw->ctrl.data = cpu_to_le32(status.data); +} + +static inline void release_desc(struct ksz_desc *desc) +{ + desc->sw.ctrl.tx.hw_owned = 1; + if (desc->sw.buf_size != desc->sw.buf.data) { + desc->sw.buf_size = desc->sw.buf.data; + desc->phw->buf.data = cpu_to_le32(desc->sw.buf.data); + } + desc->phw->ctrl.data = cpu_to_le32(desc->sw.ctrl.data); +} + +static void get_rx_pkt(struct ksz_desc_info *info, struct ksz_desc **desc) +{ + *desc = &info->ring[info->last]; + info->last++; + info->last &= info->mask; + info->avail--; + (*desc)->sw.buf.data &= ~KS_DESC_RX_MASK; +} + +static inline void set_rx_buf(struct ksz_desc *desc, u32 addr) +{ + desc->phw->addr = cpu_to_le32(addr); +} + +static inline void set_rx_len(struct ksz_desc *desc, u32 len) +{ + desc->sw.buf.rx.buf_size = len; +} + +static inline void get_tx_pkt(struct ksz_desc_info *info, + struct ksz_desc **desc) +{ + *desc = &info->ring[info->next]; + info->next++; + info->next &= info->mask; + info->avail--; + (*desc)->sw.buf.data &= ~KS_DESC_TX_MASK; +} + +static inline void set_tx_buf(struct ksz_desc *desc, u32 addr) +{ + desc->phw->addr = cpu_to_le32(addr); +} + +static inline void set_tx_len(struct ksz_desc *desc, u32 len) +{ + desc->sw.buf.tx.buf_size = len; +} + +/* Switch functions */ + +#define TABLE_READ 0x10 +#define TABLE_SEL_SHIFT 2 + +#define HW_DELAY(hw, reg) \ + do { \ + readw(hw->io + reg); \ + } while (0) + +/** + * sw_r_table - read 4 bytes of data from switch table + * @hw: The hardware instance. + * @table: The table selector. + * @addr: The address of the table entry. + * @data: Buffer to store the read data. + * + * This routine reads 4 bytes of data from the table of the switch. + * Hardware interrupts are disabled to minimize corruption of read data. + */ +static void sw_r_table(struct ksz_hw *hw, int table, u16 addr, u32 *data) +{ + u16 ctrl_addr; + uint interrupt; + + ctrl_addr = (((table << TABLE_SEL_SHIFT) | TABLE_READ) << 8) | addr; + + interrupt = hw_block_intr(hw); + + writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET); + HW_DELAY(hw, KS884X_IACR_OFFSET); + *data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET); + + hw_restore_intr(hw, interrupt); +} + +/** + * sw_w_table_64 - write 8 bytes of data to the switch table + * @hw: The hardware instance. + * @table: The table selector. + * @addr: The address of the table entry. + * @data_hi: The high part of data to be written (bit63 ~ bit32). + * @data_lo: The low part of data to be written (bit31 ~ bit0). + * + * This routine writes 8 bytes of data to the table of the switch. + * Hardware interrupts are disabled to minimize corruption of written data. + */ +static void sw_w_table_64(struct ksz_hw *hw, int table, u16 addr, u32 data_hi, + u32 data_lo) +{ + u16 ctrl_addr; + uint interrupt; + + ctrl_addr = ((table << TABLE_SEL_SHIFT) << 8) | addr; + + interrupt = hw_block_intr(hw); + + writel(data_hi, hw->io + KS884X_ACC_DATA_4_OFFSET); + writel(data_lo, hw->io + KS884X_ACC_DATA_0_OFFSET); + + writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET); + HW_DELAY(hw, KS884X_IACR_OFFSET); + + hw_restore_intr(hw, interrupt); +} + +/** + * sw_w_sta_mac_table - write to the static MAC table + * @hw: The hardware instance. + * @addr: The address of the table entry. + * @mac_addr: The MAC address. + * @ports: The port members. + * @override: The flag to override the port receive/transmit settings. + * @valid: The flag to indicate entry is valid. + * @use_fid: The flag to indicate the FID is valid. + * @fid: The FID value. + * + * This routine writes an entry of the static MAC table of the switch. It + * calls sw_w_table_64() to write the data. + */ +static void sw_w_sta_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr, + u8 ports, int override, int valid, int use_fid, u8 fid) +{ + u32 data_hi; + u32 data_lo; + + data_lo = ((u32) mac_addr[2] << 24) | + ((u32) mac_addr[3] << 16) | + ((u32) mac_addr[4] << 8) | mac_addr[5]; + data_hi = ((u32) mac_addr[0] << 8) | mac_addr[1]; + data_hi |= (u32) ports << STATIC_MAC_FWD_PORTS_SHIFT; + + if (override) + data_hi |= STATIC_MAC_TABLE_OVERRIDE; + if (use_fid) { + data_hi |= STATIC_MAC_TABLE_USE_FID; + data_hi |= (u32) fid << STATIC_MAC_FID_SHIFT; + } + if (valid) + data_hi |= STATIC_MAC_TABLE_VALID; + + sw_w_table_64(hw, TABLE_STATIC_MAC, addr, data_hi, data_lo); +} + +/** + * sw_r_vlan_table - read from the VLAN table + * @hw: The hardware instance. + * @addr: The address of the table entry. + * @vid: Buffer to store the VID. + * @fid: Buffer to store the VID. + * @member: Buffer to store the port membership. + * + * This function reads an entry of the VLAN table of the switch. It calls + * sw_r_table() to get the data. + * + * Return 0 if the entry is valid; otherwise -1. + */ +static int sw_r_vlan_table(struct ksz_hw *hw, u16 addr, u16 *vid, u8 *fid, + u8 *member) +{ + u32 data; + + sw_r_table(hw, TABLE_VLAN, addr, &data); + if (data & VLAN_TABLE_VALID) { + *vid = (u16)(data & VLAN_TABLE_VID); + *fid = (u8)((data & VLAN_TABLE_FID) >> VLAN_TABLE_FID_SHIFT); + *member = (u8)((data & VLAN_TABLE_MEMBERSHIP) >> + VLAN_TABLE_MEMBERSHIP_SHIFT); + return 0; + } + return -1; +} + +/** + * port_r_mib_cnt - read MIB counter + * @hw: The hardware instance. + * @port: The port index. + * @addr: The address of the counter. + * @cnt: Buffer to store the counter. + * + * This routine reads a MIB counter of the port. + * Hardware interrupts are disabled to minimize corruption of read data. + */ +static void port_r_mib_cnt(struct ksz_hw *hw, int port, u16 addr, u64 *cnt) +{ + u32 data; + u16 ctrl_addr; + uint interrupt; + int timeout; + + ctrl_addr = addr + PORT_COUNTER_NUM * port; + + interrupt = hw_block_intr(hw); + + ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ) << 8); + writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET); + HW_DELAY(hw, KS884X_IACR_OFFSET); + + for (timeout = 100; timeout > 0; timeout--) { + data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET); + + if (data & MIB_COUNTER_VALID) { + if (data & MIB_COUNTER_OVERFLOW) + *cnt += MIB_COUNTER_VALUE + 1; + *cnt += data & MIB_COUNTER_VALUE; + break; + } + } + + hw_restore_intr(hw, interrupt); +} + +/** + * port_r_mib_pkt - read dropped packet counts + * @hw: The hardware instance. + * @port: The port index. + * @last: last one + * @cnt: Buffer to store the receive and transmit dropped packet counts. + * + * This routine reads the dropped packet counts of the port. + * Hardware interrupts are disabled to minimize corruption of read data. + */ +static void port_r_mib_pkt(struct ksz_hw *hw, int port, u32 *last, u64 *cnt) +{ + u32 cur; + u32 data; + u16 ctrl_addr; + uint interrupt; + int index; + + index = KS_MIB_PACKET_DROPPED_RX_0 + port; + do { + interrupt = hw_block_intr(hw); + + ctrl_addr = (u16) index; + ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ) + << 8); + writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET); + HW_DELAY(hw, KS884X_IACR_OFFSET); + data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET); + + hw_restore_intr(hw, interrupt); + + data &= MIB_PACKET_DROPPED; + cur = *last; + if (data != cur) { + *last = data; + if (data < cur) + data += MIB_PACKET_DROPPED + 1; + data -= cur; + *cnt += data; + } + ++last; + ++cnt; + index -= KS_MIB_PACKET_DROPPED_TX - + KS_MIB_PACKET_DROPPED_TX_0 + 1; + } while (index >= KS_MIB_PACKET_DROPPED_TX_0 + port); +} + +/** + * port_r_cnt - read MIB counters periodically + * @hw: The hardware instance. + * @port: The port index. + * + * This routine is used to read the counters of the port periodically to avoid + * counter overflow. The hardware should be acquired first before calling this + * routine. + * + * Return non-zero when not all counters not read. + */ +static int port_r_cnt(struct ksz_hw *hw, int port) +{ + struct ksz_port_mib *mib = &hw->port_mib[port]; + + if (mib->mib_start < PORT_COUNTER_NUM) + while (mib->cnt_ptr < PORT_COUNTER_NUM) { + port_r_mib_cnt(hw, port, mib->cnt_ptr, + &mib->counter[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + if (hw->mib_cnt > PORT_COUNTER_NUM) + port_r_mib_pkt(hw, port, mib->dropped, + &mib->counter[PORT_COUNTER_NUM]); + mib->cnt_ptr = 0; + return 0; +} + +/** + * port_init_cnt - initialize MIB counter values + * @hw: The hardware instance. + * @port: The port index. + * + * This routine is used to initialize all counters to zero if the hardware + * cannot do it after reset. + */ +static void port_init_cnt(struct ksz_hw *hw, int port) +{ + struct ksz_port_mib *mib = &hw->port_mib[port]; + + mib->cnt_ptr = 0; + if (mib->mib_start < PORT_COUNTER_NUM) + do { + port_r_mib_cnt(hw, port, mib->cnt_ptr, + &mib->counter[mib->cnt_ptr]); + ++mib->cnt_ptr; + } while (mib->cnt_ptr < PORT_COUNTER_NUM); + if (hw->mib_cnt > PORT_COUNTER_NUM) + port_r_mib_pkt(hw, port, mib->dropped, + &mib->counter[PORT_COUNTER_NUM]); + memset((void *) mib->counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM); + mib->cnt_ptr = 0; +} + +/* + * Port functions + */ + +/** + * port_chk - check port register bits + * @hw: The hardware instance. + * @port: The port index. + * @offset: The offset of the port register. + * @bits: The data bits to check. + * + * This function checks whether the specified bits of the port register are set + * or not. + * + * Return 0 if the bits are not set. + */ +static int port_chk(struct ksz_hw *hw, int port, int offset, u16 bits) +{ + u32 addr; + u16 data; + + PORT_CTRL_ADDR(port, addr); + addr += offset; + data = readw(hw->io + addr); + return (data & bits) == bits; +} + +/** + * port_cfg - set port register bits + * @hw: The hardware instance. + * @port: The port index. + * @offset: The offset of the port register. + * @bits: The data bits to set. + * @set: The flag indicating whether the bits are to be set or not. + * + * This routine sets or resets the specified bits of the port register. + */ +static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits, + int set) +{ + u32 addr; + u16 data; + + PORT_CTRL_ADDR(port, addr); + addr += offset; + data = readw(hw->io + addr); + if (set) + data |= bits; + else + data &= ~bits; + writew(data, hw->io + addr); +} + +/** + * port_chk_shift - check port bit + * @hw: The hardware instance. + * @port: The port index. + * @addr: The offset of the register. + * @shift: Number of bits to shift. + * + * This function checks whether the specified port is set in the register or + * not. + * + * Return 0 if the port is not set. + */ +static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift) +{ + u16 data; + u16 bit = 1 << port; + + data = readw(hw->io + addr); + data >>= shift; + return (data & bit) == bit; +} + +/** + * port_cfg_shift - set port bit + * @hw: The hardware instance. + * @port: The port index. + * @addr: The offset of the register. + * @shift: Number of bits to shift. + * @set: The flag indicating whether the port is to be set or not. + * + * This routine sets or resets the specified port in the register. + */ +static void port_cfg_shift(struct ksz_hw *hw, int port, u32 addr, int shift, + int set) +{ + u16 data; + u16 bits = 1 << port; + + data = readw(hw->io + addr); + bits <<= shift; + if (set) + data |= bits; + else + data &= ~bits; + writew(data, hw->io + addr); +} + +/** + * port_r8 - read byte from port register + * @hw: The hardware instance. + * @port: The port index. + * @offset: The offset of the port register. + * @data: Buffer to store the data. + * + * This routine reads a byte from the port register. + */ +static void port_r8(struct ksz_hw *hw, int port, int offset, u8 *data) +{ + u32 addr; + + PORT_CTRL_ADDR(port, addr); + addr += offset; + *data = readb(hw->io + addr); +} + +/** + * port_r16 - read word from port register. + * @hw: The hardware instance. + * @port: The port index. + * @offset: The offset of the port register. + * @data: Buffer to store the data. + * + * This routine reads a word from the port register. + */ +static void port_r16(struct ksz_hw *hw, int port, int offset, u16 *data) +{ + u32 addr; + + PORT_CTRL_ADDR(port, addr); + addr += offset; + *data = readw(hw->io + addr); +} + +/** + * port_w16 - write word to port register. + * @hw: The hardware instance. + * @port: The port index. + * @offset: The offset of the port register. + * @data: Data to write. + * + * This routine writes a word to the port register. + */ +static void port_w16(struct ksz_hw *hw, int port, int offset, u16 data) +{ + u32 addr; + + PORT_CTRL_ADDR(port, addr); + addr += offset; + writew(data, hw->io + addr); +} + +/** + * sw_chk - check switch register bits + * @hw: The hardware instance. + * @addr: The address of the switch register. + * @bits: The data bits to check. + * + * This function checks whether the specified bits of the switch register are + * set or not. + * + * Return 0 if the bits are not set. + */ +static int sw_chk(struct ksz_hw *hw, u32 addr, u16 bits) +{ + u16 data; + + data = readw(hw->io + addr); + return (data & bits) == bits; +} + +/** + * sw_cfg - set switch register bits + * @hw: The hardware instance. + * @addr: The address of the switch register. + * @bits: The data bits to set. + * @set: The flag indicating whether the bits are to be set or not. + * + * This function sets or resets the specified bits of the switch register. + */ +static void sw_cfg(struct ksz_hw *hw, u32 addr, u16 bits, int set) +{ + u16 data; + + data = readw(hw->io + addr); + if (set) + data |= bits; + else + data &= ~bits; + writew(data, hw->io + addr); +} + +/* Bandwidth */ + +static inline void port_cfg_broad_storm(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM, set); +} + +static inline int port_chk_broad_storm(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM); +} + +/* Driver set switch broadcast storm protection at 10% rate. */ +#define BROADCAST_STORM_PROTECTION_RATE 10 + +/* 148,800 frames * 67 ms / 100 */ +#define BROADCAST_STORM_VALUE 9969 + +/** + * sw_cfg_broad_storm - configure broadcast storm threshold + * @hw: The hardware instance. + * @percent: Broadcast storm threshold in percent of transmit rate. + * + * This routine configures the broadcast storm threshold of the switch. + */ +static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent) +{ + u16 data; + u32 value = ((u32) BROADCAST_STORM_VALUE * (u32) percent / 100); + + if (value > BROADCAST_STORM_RATE) + value = BROADCAST_STORM_RATE; + + data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET); + data &= ~(BROADCAST_STORM_RATE_LO | BROADCAST_STORM_RATE_HI); + data |= ((value & 0x00FF) << 8) | ((value & 0xFF00) >> 8); + writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET); +} + +/** + * sw_get_board_storm - get broadcast storm threshold + * @hw: The hardware instance. + * @percent: Buffer to store the broadcast storm threshold percentage. + * + * This routine retrieves the broadcast storm threshold of the switch. + */ +static void sw_get_broad_storm(struct ksz_hw *hw, u8 *percent) +{ + int num; + u16 data; + + data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET); + num = (data & BROADCAST_STORM_RATE_HI); + num <<= 8; + num |= (data & BROADCAST_STORM_RATE_LO) >> 8; + num = DIV_ROUND_CLOSEST(num * 100, BROADCAST_STORM_VALUE); + *percent = (u8) num; +} + +/** + * sw_dis_broad_storm - disable broadstorm + * @hw: The hardware instance. + * @port: The port index. + * + * This routine disables the broadcast storm limit function of the switch. + */ +static void sw_dis_broad_storm(struct ksz_hw *hw, int port) +{ + port_cfg_broad_storm(hw, port, 0); +} + +/** + * sw_ena_broad_storm - enable broadcast storm + * @hw: The hardware instance. + * @port: The port index. + * + * This routine enables the broadcast storm limit function of the switch. + */ +static void sw_ena_broad_storm(struct ksz_hw *hw, int port) +{ + sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per); + port_cfg_broad_storm(hw, port, 1); +} + +/** + * sw_init_broad_storm - initialize broadcast storm + * @hw: The hardware instance. + * + * This routine initializes the broadcast storm limit function of the switch. + */ +static void sw_init_broad_storm(struct ksz_hw *hw) +{ + int port; + + hw->ksz_switch->broad_per = 1; + sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per); + for (port = 0; port < TOTAL_PORT_NUM; port++) + sw_dis_broad_storm(hw, port); + sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, MULTICAST_STORM_DISABLE, 1); +} + +/** + * hw_cfg_broad_storm - configure broadcast storm + * @hw: The hardware instance. + * @percent: Broadcast storm threshold in percent of transmit rate. + * + * This routine configures the broadcast storm threshold of the switch. + * It is called by user functions. The hardware should be acquired first. + */ +static void hw_cfg_broad_storm(struct ksz_hw *hw, u8 percent) +{ + if (percent > 100) + percent = 100; + + sw_cfg_broad_storm(hw, percent); + sw_get_broad_storm(hw, &percent); + hw->ksz_switch->broad_per = percent; +} + +/** + * sw_dis_prio_rate - disable switch priority rate + * @hw: The hardware instance. + * @port: The port index. + * + * This routine disables the priority rate function of the switch. + */ +static void sw_dis_prio_rate(struct ksz_hw *hw, int port) +{ + u32 addr; + + PORT_CTRL_ADDR(port, addr); + addr += KS8842_PORT_IN_RATE_OFFSET; + writel(0, hw->io + addr); +} + +/** + * sw_init_prio_rate - initialize switch prioirty rate + * @hw: The hardware instance. + * + * This routine initializes the priority rate function of the switch. + */ +static void sw_init_prio_rate(struct ksz_hw *hw) +{ + int port; + int prio; + struct ksz_switch *sw = hw->ksz_switch; + + for (port = 0; port < TOTAL_PORT_NUM; port++) { + for (prio = 0; prio < PRIO_QUEUES; prio++) { + sw->port_cfg[port].rx_rate[prio] = + sw->port_cfg[port].tx_rate[prio] = 0; + } + sw_dis_prio_rate(hw, port); + } +} + +/* Communication */ + +static inline void port_cfg_back_pressure(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE, set); +} + +static inline void port_cfg_force_flow_ctrl(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL, set); +} + +static inline int port_chk_back_pressure(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE); +} + +static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL); +} + +/* Spanning Tree */ + +static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_RX_ENABLE, set); +} + +static inline void port_cfg_tx(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_TX_ENABLE, set); +} + +static inline void sw_cfg_fast_aging(struct ksz_hw *hw, int set) +{ + sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, SWITCH_FAST_AGING, set); +} + +static inline void sw_flush_dyn_mac_table(struct ksz_hw *hw) +{ + if (!(hw->overrides & FAST_AGING)) { + sw_cfg_fast_aging(hw, 1); + mdelay(1); + sw_cfg_fast_aging(hw, 0); + } +} + +/* VLAN */ + +static inline void port_cfg_ins_tag(struct ksz_hw *hw, int p, int insert) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG, insert); +} + +static inline void port_cfg_rmv_tag(struct ksz_hw *hw, int p, int remove) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG, remove); +} + +static inline int port_chk_ins_tag(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG); +} + +static inline int port_chk_rmv_tag(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG); +} + +static inline void port_cfg_dis_non_vid(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID, set); +} + +static inline void port_cfg_in_filter(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER, set); +} + +static inline int port_chk_dis_non_vid(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID); +} + +static inline int port_chk_in_filter(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER); +} + +/* Mirroring */ + +static inline void port_cfg_mirror_sniffer(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_SNIFFER, set); +} + +static inline void port_cfg_mirror_rx(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_RX, set); +} + +static inline void port_cfg_mirror_tx(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_TX, set); +} + +static inline void sw_cfg_mirror_rx_tx(struct ksz_hw *hw, int set) +{ + sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_MIRROR_RX_TX, set); +} + +static void sw_init_mirror(struct ksz_hw *hw) +{ + int port; + + for (port = 0; port < TOTAL_PORT_NUM; port++) { + port_cfg_mirror_sniffer(hw, port, 0); + port_cfg_mirror_rx(hw, port, 0); + port_cfg_mirror_tx(hw, port, 0); + } + sw_cfg_mirror_rx_tx(hw, 0); +} + +static inline void sw_cfg_unk_def_deliver(struct ksz_hw *hw, int set) +{ + sw_cfg(hw, KS8842_SWITCH_CTRL_7_OFFSET, + SWITCH_UNK_DEF_PORT_ENABLE, set); +} + +static inline int sw_cfg_chk_unk_def_deliver(struct ksz_hw *hw) +{ + return sw_chk(hw, KS8842_SWITCH_CTRL_7_OFFSET, + SWITCH_UNK_DEF_PORT_ENABLE); +} + +static inline void sw_cfg_unk_def_port(struct ksz_hw *hw, int port, int set) +{ + port_cfg_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0, set); +} + +static inline int sw_chk_unk_def_port(struct ksz_hw *hw, int port) +{ + return port_chk_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0); +} + +/* Priority */ + +static inline void port_cfg_diffserv(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE, set); +} + +static inline void port_cfg_802_1p(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE, set); +} + +static inline void port_cfg_replace_vid(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING, set); +} + +static inline void port_cfg_prio(struct ksz_hw *hw, int p, int set) +{ + port_cfg(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE, set); +} + +static inline int port_chk_diffserv(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE); +} + +static inline int port_chk_802_1p(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE); +} + +static inline int port_chk_replace_vid(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING); +} + +static inline int port_chk_prio(struct ksz_hw *hw, int p) +{ + return port_chk(hw, p, + KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE); +} + +/** + * sw_dis_diffserv - disable switch DiffServ priority + * @hw: The hardware instance. + * @port: The port index. + * + * This routine disables the DiffServ priority function of the switch. + */ +static void sw_dis_diffserv(struct ksz_hw *hw, int port) +{ + port_cfg_diffserv(hw, port, 0); +} + +/** + * sw_dis_802_1p - disable switch 802.1p priority + * @hw: The hardware instance. + * @port: The port index. + * + * This routine disables the 802.1p priority function of the switch. + */ +static void sw_dis_802_1p(struct ksz_hw *hw, int port) +{ + port_cfg_802_1p(hw, port, 0); +} + +/** + * sw_cfg_replace_null_vid - + * @hw: The hardware instance. + * @set: The flag to disable or enable. + * + */ +static void sw_cfg_replace_null_vid(struct ksz_hw *hw, int set) +{ + sw_cfg(hw, KS8842_SWITCH_CTRL_3_OFFSET, SWITCH_REPLACE_NULL_VID, set); +} + +/** + * sw_cfg_replace_vid - enable switch 802.10 priority re-mapping + * @hw: The hardware instance. + * @port: The port index. + * @set: The flag to disable or enable. + * + * This routine enables the 802.1p priority re-mapping function of the switch. + * That allows 802.1p priority field to be replaced with the port's default + * tag's priority value if the ingress packet's 802.1p priority has a higher + * priority than port's default tag's priority. + */ +static void sw_cfg_replace_vid(struct ksz_hw *hw, int port, int set) +{ + port_cfg_replace_vid(hw, port, set); +} + +/** + * sw_cfg_port_based - configure switch port based priority + * @hw: The hardware instance. + * @port: The port index. + * @prio: The priority to set. + * + * This routine configures the port based priority of the switch. + */ +static void sw_cfg_port_based(struct ksz_hw *hw, int port, u8 prio) +{ + u16 data; + + if (prio > PORT_BASED_PRIORITY_BASE) + prio = PORT_BASED_PRIORITY_BASE; + + hw->ksz_switch->port_cfg[port].port_prio = prio; + + port_r16(hw, port, KS8842_PORT_CTRL_1_OFFSET, &data); + data &= ~PORT_BASED_PRIORITY_MASK; + data |= prio << PORT_BASED_PRIORITY_SHIFT; + port_w16(hw, port, KS8842_PORT_CTRL_1_OFFSET, data); +} + +/** + * sw_dis_multi_queue - disable transmit multiple queues + * @hw: The hardware instance. + * @port: The port index. + * + * This routine disables the transmit multiple queues selection of the switch + * port. Only single transmit queue on the port. + */ +static void sw_dis_multi_queue(struct ksz_hw *hw, int port) +{ + port_cfg_prio(hw, port, 0); +} + +/** + * sw_init_prio - initialize switch priority + * @hw: The hardware instance. + * + * This routine initializes the switch QoS priority functions. + */ +static void sw_init_prio(struct ksz_hw *hw) +{ + int port; + int tos; + struct ksz_switch *sw = hw->ksz_switch; + + /* + * Init all the 802.1p tag priority value to be assigned to different + * priority queue. + */ + sw->p_802_1p[0] = 0; + sw->p_802_1p[1] = 0; + sw->p_802_1p[2] = 1; + sw->p_802_1p[3] = 1; + sw->p_802_1p[4] = 2; + sw->p_802_1p[5] = 2; + sw->p_802_1p[6] = 3; + sw->p_802_1p[7] = 3; + + /* + * Init all the DiffServ priority value to be assigned to priority + * queue 0. + */ + for (tos = 0; tos < DIFFSERV_ENTRIES; tos++) + sw->diffserv[tos] = 0; + + /* All QoS functions disabled. */ + for (port = 0; port < TOTAL_PORT_NUM; port++) { + sw_dis_multi_queue(hw, port); + sw_dis_diffserv(hw, port); + sw_dis_802_1p(hw, port); + sw_cfg_replace_vid(hw, port, 0); + + sw->port_cfg[port].port_prio = 0; + sw_cfg_port_based(hw, port, sw->port_cfg[port].port_prio); + } + sw_cfg_replace_null_vid(hw, 0); +} + +/** + * port_get_def_vid - get port default VID. + * @hw: The hardware instance. + * @port: The port index. + * @vid: Buffer to store the VID. + * + * This routine retrieves the default VID of the port. + */ +static void port_get_def_vid(struct ksz_hw *hw, int port, u16 *vid) +{ + u32 addr; + + PORT_CTRL_ADDR(port, addr); + addr += KS8842_PORT_CTRL_VID_OFFSET; + *vid = readw(hw->io + addr); +} + +/** + * sw_init_vlan - initialize switch VLAN + * @hw: The hardware instance. + * + * This routine initializes the VLAN function of the switch. + */ +static void sw_init_vlan(struct ksz_hw *hw) +{ + int port; + int entry; + struct ksz_switch *sw = hw->ksz_switch; + + /* Read 16 VLAN entries from device's VLAN table. */ + for (entry = 0; entry < VLAN_TABLE_ENTRIES; entry++) { + sw_r_vlan_table(hw, entry, + &sw->vlan_table[entry].vid, + &sw->vlan_table[entry].fid, + &sw->vlan_table[entry].member); + } + + for (port = 0; port < TOTAL_PORT_NUM; port++) { + port_get_def_vid(hw, port, &sw->port_cfg[port].vid); + sw->port_cfg[port].member = PORT_MASK; + } +} + +/** + * sw_cfg_port_base_vlan - configure port-based VLAN membership + * @hw: The hardware instance. + * @port: The port index. + * @member: The port-based VLAN membership. + * + * This routine configures the port-based VLAN membership of the port. + */ +static void sw_cfg_port_base_vlan(struct ksz_hw *hw, int port, u8 member) +{ + u32 addr; + u8 data; + + PORT_CTRL_ADDR(port, addr); + addr += KS8842_PORT_CTRL_2_OFFSET; + + data = readb(hw->io + addr); + data &= ~PORT_VLAN_MEMBERSHIP; + data |= (member & PORT_MASK); + writeb(data, hw->io + addr); + + hw->ksz_switch->port_cfg[port].member = member; +} + +/** + * sw_get_addr - get the switch MAC address. + * @hw: The hardware instance. + * @mac_addr: Buffer to store the MAC address. + * + * This function retrieves the MAC address of the switch. + */ +static inline void sw_get_addr(struct ksz_hw *hw, u8 *mac_addr) +{ + int i; + + for (i = 0; i < 6; i += 2) { + mac_addr[i] = readb(hw->io + KS8842_MAC_ADDR_0_OFFSET + i); + mac_addr[1 + i] = readb(hw->io + KS8842_MAC_ADDR_1_OFFSET + i); + } +} + +/** + * sw_set_addr - configure switch MAC address + * @hw: The hardware instance. + * @mac_addr: The MAC address. + * + * This function configures the MAC address of the switch. + */ +static void sw_set_addr(struct ksz_hw *hw, u8 *mac_addr) +{ + int i; + + for (i = 0; i < 6; i += 2) { + writeb(mac_addr[i], hw->io + KS8842_MAC_ADDR_0_OFFSET + i); + writeb(mac_addr[1 + i], hw->io + KS8842_MAC_ADDR_1_OFFSET + i); + } +} + +/** + * sw_set_global_ctrl - set switch global control + * @hw: The hardware instance. + * + * This routine sets the global control of the switch function. + */ +static void sw_set_global_ctrl(struct ksz_hw *hw) +{ + u16 data; + + /* Enable switch MII flow control. */ + data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET); + data |= SWITCH_FLOW_CTRL; + writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET); + + data = readw(hw->io + KS8842_SWITCH_CTRL_1_OFFSET); + + /* Enable aggressive back off algorithm in half duplex mode. */ + data |= SWITCH_AGGR_BACKOFF; + + /* Enable automatic fast aging when link changed detected. */ + data |= SWITCH_AGING_ENABLE; + data |= SWITCH_LINK_AUTO_AGING; + + if (hw->overrides & FAST_AGING) + data |= SWITCH_FAST_AGING; + else + data &= ~SWITCH_FAST_AGING; + writew(data, hw->io + KS8842_SWITCH_CTRL_1_OFFSET); + + data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET); + + /* Enable no excessive collision drop. */ + data |= NO_EXC_COLLISION_DROP; + writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET); +} + +enum { + STP_STATE_DISABLED = 0, + STP_STATE_LISTENING, + STP_STATE_LEARNING, + STP_STATE_FORWARDING, + STP_STATE_BLOCKED, + STP_STATE_SIMPLE +}; + +/** + * port_set_stp_state - configure port spanning tree state + * @hw: The hardware instance. + * @port: The port index. + * @state: The spanning tree state. + * + * This routine configures the spanning tree state of the port. + */ +static void port_set_stp_state(struct ksz_hw *hw, int port, int state) +{ + u16 data; + + port_r16(hw, port, KS8842_PORT_CTRL_2_OFFSET, &data); + switch (state) { + case STP_STATE_DISABLED: + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE); + data |= PORT_LEARN_DISABLE; + break; + case STP_STATE_LISTENING: +/* + * No need to turn on transmit because of port direct mode. + * Turning on receive is required if static MAC table is not setup. + */ + data &= ~PORT_TX_ENABLE; + data |= PORT_RX_ENABLE; + data |= PORT_LEARN_DISABLE; + break; + case STP_STATE_LEARNING: + data &= ~PORT_TX_ENABLE; + data |= PORT_RX_ENABLE; + data &= ~PORT_LEARN_DISABLE; + break; + case STP_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + data &= ~PORT_LEARN_DISABLE; + break; + case STP_STATE_BLOCKED: +/* + * Need to setup static MAC table with override to keep receiving BPDU + * messages. See sw_init_stp routine. + */ + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE); + data |= PORT_LEARN_DISABLE; + break; + case STP_STATE_SIMPLE: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + data |= PORT_LEARN_DISABLE; + break; + } + port_w16(hw, port, KS8842_PORT_CTRL_2_OFFSET, data); + hw->ksz_switch->port_cfg[port].stp_state = state; +} + +#define STP_ENTRY 0 +#define BROADCAST_ENTRY 1 +#define BRIDGE_ADDR_ENTRY 2 +#define IPV6_ADDR_ENTRY 3 + +/** + * sw_clr_sta_mac_table - clear static MAC table + * @hw: The hardware instance. + * + * This routine clears the static MAC table. + */ +static void sw_clr_sta_mac_table(struct ksz_hw *hw) +{ + struct ksz_mac_table *entry; + int i; + + for (i = 0; i < STATIC_MAC_TABLE_ENTRIES; i++) { + entry = &hw->ksz_switch->mac_table[i]; + sw_w_sta_mac_table(hw, i, + entry->mac_addr, entry->ports, + entry->override, 0, + entry->use_fid, entry->fid); + } +} + +/** + * sw_init_stp - initialize switch spanning tree support + * @hw: The hardware instance. + * + * This routine initializes the spanning tree support of the switch. + */ +static void sw_init_stp(struct ksz_hw *hw) +{ + struct ksz_mac_table *entry; + + entry = &hw->ksz_switch->mac_table[STP_ENTRY]; + entry->mac_addr[0] = 0x01; + entry->mac_addr[1] = 0x80; + entry->mac_addr[2] = 0xC2; + entry->mac_addr[3] = 0x00; + entry->mac_addr[4] = 0x00; + entry->mac_addr[5] = 0x00; + entry->ports = HOST_MASK; + entry->override = 1; + entry->valid = 1; + sw_w_sta_mac_table(hw, STP_ENTRY, + entry->mac_addr, entry->ports, + entry->override, entry->valid, + entry->use_fid, entry->fid); +} + +/** + * sw_block_addr - block certain packets from the host port + * @hw: The hardware instance. + * + * This routine blocks certain packets from reaching to the host port. + */ +static void sw_block_addr(struct ksz_hw *hw) +{ + struct ksz_mac_table *entry; + int i; + + for (i = BROADCAST_ENTRY; i <= IPV6_ADDR_ENTRY; i++) { + entry = &hw->ksz_switch->mac_table[i]; + entry->valid = 0; + sw_w_sta_mac_table(hw, i, + entry->mac_addr, entry->ports, + entry->override, entry->valid, + entry->use_fid, entry->fid); + } +} + +#define PHY_LINK_SUPPORT \ + (PHY_AUTO_NEG_ASYM_PAUSE | \ + PHY_AUTO_NEG_SYM_PAUSE | \ + PHY_AUTO_NEG_100BT4 | \ + PHY_AUTO_NEG_100BTX_FD | \ + PHY_AUTO_NEG_100BTX | \ + PHY_AUTO_NEG_10BT_FD | \ + PHY_AUTO_NEG_10BT) + +static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET); +} + +static inline void hw_w_phy_ctrl(struct ksz_hw *hw, int phy, u16 data) +{ + writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET); +} + +static inline void hw_r_phy_link_stat(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_STATUS_OFFSET); +} + +static inline void hw_r_phy_auto_neg(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET); +} + +static inline void hw_w_phy_auto_neg(struct ksz_hw *hw, int phy, u16 data) +{ + writew(data, hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET); +} + +static inline void hw_r_phy_rem_cap(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_REMOTE_CAP_OFFSET); +} + +static inline void hw_r_phy_crossover(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET); +} + +static inline void hw_w_phy_crossover(struct ksz_hw *hw, int phy, u16 data) +{ + writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET); +} + +static inline void hw_r_phy_polarity(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET); +} + +static inline void hw_w_phy_polarity(struct ksz_hw *hw, int phy, u16 data) +{ + writew(data, hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET); +} + +static inline void hw_r_phy_link_md(struct ksz_hw *hw, int phy, u16 *data) +{ + *data = readw(hw->io + phy + KS884X_PHY_LINK_MD_OFFSET); +} + +static inline void hw_w_phy_link_md(struct ksz_hw *hw, int phy, u16 data) +{ + writew(data, hw->io + phy + KS884X_PHY_LINK_MD_OFFSET); +} + +/** + * hw_r_phy - read data from PHY register + * @hw: The hardware instance. + * @port: Port to read. + * @reg: PHY register to read. + * @val: Buffer to store the read data. + * + * This routine reads data from the PHY register. + */ +static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val) +{ + int phy; + + phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg; + *val = readw(hw->io + phy); +} + +/** + * port_w_phy - write data to PHY register + * @hw: The hardware instance. + * @port: Port to write. + * @reg: PHY register to write. + * @val: Word data to write. + * + * This routine writes data to the PHY register. + */ +static void hw_w_phy(struct ksz_hw *hw, int port, u16 reg, u16 val) +{ + int phy; + + phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg; + writew(val, hw->io + phy); +} + +/* + * EEPROM access functions + */ + +#define AT93C_CODE 0 +#define AT93C_WR_OFF 0x00 +#define AT93C_WR_ALL 0x10 +#define AT93C_ER_ALL 0x20 +#define AT93C_WR_ON 0x30 + +#define AT93C_WRITE 1 +#define AT93C_READ 2 +#define AT93C_ERASE 3 + +#define EEPROM_DELAY 4 + +static inline void drop_gpio(struct ksz_hw *hw, u8 gpio) +{ + u16 data; + + data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET); + data &= ~gpio; + writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET); +} + +static inline void raise_gpio(struct ksz_hw *hw, u8 gpio) +{ + u16 data; + + data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET); + data |= gpio; + writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET); +} + +static inline u8 state_gpio(struct ksz_hw *hw, u8 gpio) +{ + u16 data; + + data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET); + return (u8)(data & gpio); +} + +static void eeprom_clk(struct ksz_hw *hw) +{ + raise_gpio(hw, EEPROM_SERIAL_CLOCK); + udelay(EEPROM_DELAY); + drop_gpio(hw, EEPROM_SERIAL_CLOCK); + udelay(EEPROM_DELAY); +} + +static u16 spi_r(struct ksz_hw *hw) +{ + int i; + u16 temp = 0; + + for (i = 15; i >= 0; i--) { + raise_gpio(hw, EEPROM_SERIAL_CLOCK); + udelay(EEPROM_DELAY); + + temp |= (state_gpio(hw, EEPROM_DATA_IN)) ? 1 << i : 0; + + drop_gpio(hw, EEPROM_SERIAL_CLOCK); + udelay(EEPROM_DELAY); + } + return temp; +} + +static void spi_w(struct ksz_hw *hw, u16 data) +{ + int i; + + for (i = 15; i >= 0; i--) { + (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) : + drop_gpio(hw, EEPROM_DATA_OUT); + eeprom_clk(hw); + } +} + +static void spi_reg(struct ksz_hw *hw, u8 data, u8 reg) +{ + int i; + + /* Initial start bit */ + raise_gpio(hw, EEPROM_DATA_OUT); + eeprom_clk(hw); + + /* AT93C operation */ + for (i = 1; i >= 0; i--) { + (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) : + drop_gpio(hw, EEPROM_DATA_OUT); + eeprom_clk(hw); + } + + /* Address location */ + for (i = 5; i >= 0; i--) { + (reg & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) : + drop_gpio(hw, EEPROM_DATA_OUT); + eeprom_clk(hw); + } +} + +#define EEPROM_DATA_RESERVED 0 +#define EEPROM_DATA_MAC_ADDR_0 1 +#define EEPROM_DATA_MAC_ADDR_1 2 +#define EEPROM_DATA_MAC_ADDR_2 3 +#define EEPROM_DATA_SUBSYS_ID 4 +#define EEPROM_DATA_SUBSYS_VEN_ID 5 +#define EEPROM_DATA_PM_CAP 6 + +/* User defined EEPROM data */ +#define EEPROM_DATA_OTHER_MAC_ADDR 9 + +/** + * eeprom_read - read from AT93C46 EEPROM + * @hw: The hardware instance. + * @reg: The register offset. + * + * This function reads a word from the AT93C46 EEPROM. + * + * Return the data value. + */ +static u16 eeprom_read(struct ksz_hw *hw, u8 reg) +{ + u16 data; + + raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT); + + spi_reg(hw, AT93C_READ, reg); + data = spi_r(hw); + + drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT); + + return data; +} + +/** + * eeprom_write - write to AT93C46 EEPROM + * @hw: The hardware instance. + * @reg: The register offset. + * @data: The data value. + * + * This procedure writes a word to the AT93C46 EEPROM. + */ +static void eeprom_write(struct ksz_hw *hw, u8 reg, u16 data) +{ + int timeout; + + raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT); + + /* Enable write. */ + spi_reg(hw, AT93C_CODE, AT93C_WR_ON); + drop_gpio(hw, EEPROM_CHIP_SELECT); + udelay(1); + + /* Erase the register. */ + raise_gpio(hw, EEPROM_CHIP_SELECT); + spi_reg(hw, AT93C_ERASE, reg); + drop_gpio(hw, EEPROM_CHIP_SELECT); + udelay(1); + + /* Check operation complete. */ + raise_gpio(hw, EEPROM_CHIP_SELECT); + timeout = 8; + mdelay(2); + do { + mdelay(1); + } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout); + drop_gpio(hw, EEPROM_CHIP_SELECT); + udelay(1); + + /* Write the register. */ + raise_gpio(hw, EEPROM_CHIP_SELECT); + spi_reg(hw, AT93C_WRITE, reg); + spi_w(hw, data); + drop_gpio(hw, EEPROM_CHIP_SELECT); + udelay(1); + + /* Check operation complete. */ + raise_gpio(hw, EEPROM_CHIP_SELECT); + timeout = 8; + mdelay(2); + do { + mdelay(1); + } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout); + drop_gpio(hw, EEPROM_CHIP_SELECT); + udelay(1); + + /* Disable write. */ + raise_gpio(hw, EEPROM_CHIP_SELECT); + spi_reg(hw, AT93C_CODE, AT93C_WR_OFF); + + drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT); +} + +/* + * Link detection routines + */ + +static u16 advertised_flow_ctrl(struct ksz_port *port, u16 ctrl) +{ + ctrl &= ~PORT_AUTO_NEG_SYM_PAUSE; + switch (port->flow_ctrl) { + case PHY_FLOW_CTRL: + ctrl |= PORT_AUTO_NEG_SYM_PAUSE; + break; + /* Not supported. */ + case PHY_TX_ONLY: + case PHY_RX_ONLY: + default: + break; + } + return ctrl; +} + +static void set_flow_ctrl(struct ksz_hw *hw, int rx, int tx) +{ + u32 rx_cfg; + u32 tx_cfg; + + rx_cfg = hw->rx_cfg; + tx_cfg = hw->tx_cfg; + if (rx) + hw->rx_cfg |= DMA_RX_FLOW_ENABLE; + else + hw->rx_cfg &= ~DMA_RX_FLOW_ENABLE; + if (tx) + hw->tx_cfg |= DMA_TX_FLOW_ENABLE; + else + hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE; + if (hw->enabled) { + if (rx_cfg != hw->rx_cfg) + writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL); + if (tx_cfg != hw->tx_cfg) + writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL); + } +} + +static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port, + u16 local, u16 remote) +{ + int rx; + int tx; + + if (hw->overrides & PAUSE_FLOW_CTRL) + return; + + rx = tx = 0; + if (port->force_link) + rx = tx = 1; + if (remote & PHY_AUTO_NEG_SYM_PAUSE) { + if (local & PHY_AUTO_NEG_SYM_PAUSE) { + rx = tx = 1; + } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) && + (local & PHY_AUTO_NEG_PAUSE) == + PHY_AUTO_NEG_ASYM_PAUSE) { + tx = 1; + } + } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) { + if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE) + rx = 1; + } + if (!hw->ksz_switch) + set_flow_ctrl(hw, rx, tx); +} + +static inline void port_cfg_change(struct ksz_hw *hw, struct ksz_port *port, + struct ksz_port_info *info, u16 link_status) +{ + if ((hw->features & HALF_DUPLEX_SIGNAL_BUG) && + !(hw->overrides & PAUSE_FLOW_CTRL)) { + u32 cfg = hw->tx_cfg; + + /* Disable flow control in the half duplex mode. */ + if (1 == info->duplex) + hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE; + if (hw->enabled && cfg != hw->tx_cfg) + writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL); + } +} + +/** + * port_get_link_speed - get current link status + * @port: The port instance. + * + * This routine reads PHY registers to determine the current link status of the + * switch ports. + */ +static void port_get_link_speed(struct ksz_port *port) +{ + uint interrupt; + struct ksz_port_info *info; + struct ksz_port_info *linked = NULL; + struct ksz_hw *hw = port->hw; + u16 data; + u16 status; + u8 local; + u8 remote; + int i; + int p; + int change = 0; + + interrupt = hw_block_intr(hw); + + for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) { + info = &hw->port_info[p]; + port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data); + port_r16(hw, p, KS884X_PORT_STATUS_OFFSET, &status); + + /* + * Link status is changing all the time even when there is no + * cable connection! + */ + remote = status & (PORT_AUTO_NEG_COMPLETE | + PORT_STATUS_LINK_GOOD); + local = (u8) data; + + /* No change to status. */ + if (local == info->advertised && remote == info->partner) + continue; + + info->advertised = local; + info->partner = remote; + if (status & PORT_STATUS_LINK_GOOD) { + + /* Remember the first linked port. */ + if (!linked) + linked = info; + + info->tx_rate = 10 * TX_RATE_UNIT; + if (status & PORT_STATUS_SPEED_100MBIT) + info->tx_rate = 100 * TX_RATE_UNIT; + + info->duplex = 1; + if (status & PORT_STATUS_FULL_DUPLEX) + info->duplex = 2; + + if (media_connected != info->state) { + hw_r_phy(hw, p, KS884X_PHY_AUTO_NEG_OFFSET, + &data); + hw_r_phy(hw, p, KS884X_PHY_REMOTE_CAP_OFFSET, + &status); + determine_flow_ctrl(hw, port, data, status); + if (hw->ksz_switch) { + port_cfg_back_pressure(hw, p, + (1 == info->duplex)); + } + change |= 1 << i; + port_cfg_change(hw, port, info, status); + } + info->state = media_connected; + } else { + if (media_disconnected != info->state) { + change |= 1 << i; + + /* Indicate the link just goes down. */ + hw->port_mib[p].link_down = 1; + } + info->state = media_disconnected; + } + hw->port_mib[p].state = (u8) info->state; + } + + if (linked && media_disconnected == port->linked->state) + port->linked = linked; + + hw_restore_intr(hw, interrupt); +} + +#define PHY_RESET_TIMEOUT 10 + +/** + * port_set_link_speed - set port speed + * @port: The port instance. + * + * This routine sets the link speed of the switch ports. + */ +static void port_set_link_speed(struct ksz_port *port) +{ + struct ksz_hw *hw = port->hw; + u16 data; + u16 cfg; + u8 status; + int i; + int p; + + for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) { + port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data); + port_r8(hw, p, KS884X_PORT_STATUS_OFFSET, &status); + + cfg = 0; + if (status & PORT_STATUS_LINK_GOOD) + cfg = data; + + data |= PORT_AUTO_NEG_ENABLE; + data = advertised_flow_ctrl(port, data); + + data |= PORT_AUTO_NEG_100BTX_FD | PORT_AUTO_NEG_100BTX | + PORT_AUTO_NEG_10BT_FD | PORT_AUTO_NEG_10BT; + + /* Check if manual configuration is specified by the user. */ + if (port->speed || port->duplex) { + if (10 == port->speed) + data &= ~(PORT_AUTO_NEG_100BTX_FD | + PORT_AUTO_NEG_100BTX); + else if (100 == port->speed) + data &= ~(PORT_AUTO_NEG_10BT_FD | + PORT_AUTO_NEG_10BT); + if (1 == port->duplex) + data &= ~(PORT_AUTO_NEG_100BTX_FD | + PORT_AUTO_NEG_10BT_FD); + else if (2 == port->duplex) + data &= ~(PORT_AUTO_NEG_100BTX | + PORT_AUTO_NEG_10BT); + } + if (data != cfg) { + data |= PORT_AUTO_NEG_RESTART; + port_w16(hw, p, KS884X_PORT_CTRL_4_OFFSET, data); + } + } +} + +/** + * port_force_link_speed - force port speed + * @port: The port instance. + * + * This routine forces the link speed of the switch ports. + */ +static void port_force_link_speed(struct ksz_port *port) +{ + struct ksz_hw *hw = port->hw; + u16 data; + int i; + int phy; + int p; + + for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) { + phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL; + hw_r_phy_ctrl(hw, phy, &data); + + data &= ~PHY_AUTO_NEG_ENABLE; + + if (10 == port->speed) + data &= ~PHY_SPEED_100MBIT; + else if (100 == port->speed) + data |= PHY_SPEED_100MBIT; + if (1 == port->duplex) + data &= ~PHY_FULL_DUPLEX; + else if (2 == port->duplex) + data |= PHY_FULL_DUPLEX; + hw_w_phy_ctrl(hw, phy, data); + } +} + +static void port_set_power_saving(struct ksz_port *port, int enable) +{ + struct ksz_hw *hw = port->hw; + int i; + int p; + + for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) + port_cfg(hw, p, + KS884X_PORT_CTRL_4_OFFSET, PORT_POWER_DOWN, enable); +} + +/* + * KSZ8841 power management functions + */ + +/** + * hw_chk_wol_pme_status - check PMEN pin + * @hw: The hardware instance. + * + * This function is used to check PMEN pin is asserted. + * + * Return 1 if PMEN pin is asserted; otherwise, 0. + */ +static int hw_chk_wol_pme_status(struct ksz_hw *hw) +{ + struct dev_info *hw_priv = container_of(hw, struct dev_info, hw); + struct pci_dev *pdev = hw_priv->pdev; + u16 data; + + if (!pdev->pm_cap) + return 0; + pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data); + return (data & PCI_PM_CTRL_PME_STATUS) == PCI_PM_CTRL_PME_STATUS; +} + +/** + * hw_clr_wol_pme_status - clear PMEN pin + * @hw: The hardware instance. + * + * This routine is used to clear PME_Status to deassert PMEN pin. + */ +static void hw_clr_wol_pme_status(struct ksz_hw *hw) +{ + struct dev_info *hw_priv = container_of(hw, struct dev_info, hw); + struct pci_dev *pdev = hw_priv->pdev; + u16 data; + + if (!pdev->pm_cap) + return; + + /* Clear PME_Status to deassert PMEN pin. */ + pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data); + data |= PCI_PM_CTRL_PME_STATUS; + pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data); +} + +/** + * hw_cfg_wol_pme - enable or disable Wake-on-LAN + * @hw: The hardware instance. + * @set: The flag indicating whether to enable or disable. + * + * This routine is used to enable or disable Wake-on-LAN. + */ +static void hw_cfg_wol_pme(struct ksz_hw *hw, int set) +{ + struct dev_info *hw_priv = container_of(hw, struct dev_info, hw); + struct pci_dev *pdev = hw_priv->pdev; + u16 data; + + if (!pdev->pm_cap) + return; + pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data); + data &= ~PCI_PM_CTRL_STATE_MASK; + if (set) + data |= PCI_PM_CTRL_PME_ENABLE | PCI_D3hot; + else + data &= ~PCI_PM_CTRL_PME_ENABLE; + pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data); +} + +/** + * hw_cfg_wol - configure Wake-on-LAN features + * @hw: The hardware instance. + * @frame: The pattern frame bit. + * @set: The flag indicating whether to enable or disable. + * + * This routine is used to enable or disable certain Wake-on-LAN features. + */ +static void hw_cfg_wol(struct ksz_hw *hw, u16 frame, int set) +{ + u16 data; + + data = readw(hw->io + KS8841_WOL_CTRL_OFFSET); + if (set) + data |= frame; + else + data &= ~frame; + writew(data, hw->io + KS8841_WOL_CTRL_OFFSET); +} + +/** + * hw_set_wol_frame - program Wake-on-LAN pattern + * @hw: The hardware instance. + * @i: The frame index. + * @mask_size: The size of the mask. + * @mask: Mask to ignore certain bytes in the pattern. + * @frame_size: The size of the frame. + * @pattern: The frame data. + * + * This routine is used to program Wake-on-LAN pattern. + */ +static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size, + const u8 *mask, uint frame_size, const u8 *pattern) +{ + int bits; + int from; + int len; + int to; + u32 crc; + u8 data[64]; + u8 val = 0; + + if (frame_size > mask_size * 8) + frame_size = mask_size * 8; + if (frame_size > 64) + frame_size = 64; + + i *= 0x10; + writel(0, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i); + writel(0, hw->io + KS8841_WOL_FRAME_BYTE2_OFFSET + i); + + bits = len = from = to = 0; + do { + if (bits) { + if ((val & 1)) + data[to++] = pattern[from]; + val >>= 1; + ++from; + --bits; + } else { + val = mask[len]; + writeb(val, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i + + len); + ++len; + if (val) + bits = 8; + else + from += 8; + } + } while (from < (int) frame_size); + if (val) { + bits = mask[len - 1]; + val <<= (from % 8); + bits &= ~val; + writeb(bits, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i + len - + 1); + } + crc = ether_crc(to, data); + writel(crc, hw->io + KS8841_WOL_FRAME_CRC_OFFSET + i); +} + +/** + * hw_add_wol_arp - add ARP pattern + * @hw: The hardware instance. + * @ip_addr: The IPv4 address assigned to the device. + * + * This routine is used to add ARP pattern for waking up the host. + */ +static void hw_add_wol_arp(struct ksz_hw *hw, const u8 *ip_addr) +{ + static const u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 }; + u8 pattern[42] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x06, + 0x00, 0x01, 0x08, 0x00, 0x06, 0x04, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 }; + + memcpy(&pattern[38], ip_addr, 4); + hw_set_wol_frame(hw, 3, 6, mask, 42, pattern); +} + +/** + * hw_add_wol_bcast - add broadcast pattern + * @hw: The hardware instance. + * + * This routine is used to add broadcast pattern for waking up the host. + */ +static void hw_add_wol_bcast(struct ksz_hw *hw) +{ + static const u8 mask[] = { 0x3F }; + static const u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; + + hw_set_wol_frame(hw, 2, 1, mask, ETH_ALEN, pattern); +} + +/** + * hw_add_wol_mcast - add multicast pattern + * @hw: The hardware instance. + * + * This routine is used to add multicast pattern for waking up the host. + * + * It is assumed the multicast packet is the ICMPv6 neighbor solicitation used + * by IPv6 ping command. Note that multicast packets are filtred through the + * multicast hash table, so not all multicast packets can wake up the host. + */ +static void hw_add_wol_mcast(struct ksz_hw *hw) +{ + static const u8 mask[] = { 0x3F }; + u8 pattern[] = { 0x33, 0x33, 0xFF, 0x00, 0x00, 0x00 }; + + memcpy(&pattern[3], &hw->override_addr[3], 3); + hw_set_wol_frame(hw, 1, 1, mask, 6, pattern); +} + +/** + * hw_add_wol_ucast - add unicast pattern + * @hw: The hardware instance. + * + * This routine is used to add unicast pattern to wakeup the host. + * + * It is assumed the unicast packet is directed to the device, as the hardware + * can only receive them in normal case. + */ +static void hw_add_wol_ucast(struct ksz_hw *hw) +{ + static const u8 mask[] = { 0x3F }; + + hw_set_wol_frame(hw, 0, 1, mask, ETH_ALEN, hw->override_addr); +} + +/** + * hw_enable_wol - enable Wake-on-LAN + * @hw: The hardware instance. + * @wol_enable: The Wake-on-LAN settings. + * @net_addr: The IPv4 address assigned to the device. + * + * This routine is used to enable Wake-on-LAN depending on driver settings. + */ +static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, const u8 *net_addr) +{ + hw_cfg_wol(hw, KS8841_WOL_MAGIC_ENABLE, (wol_enable & WAKE_MAGIC)); + hw_cfg_wol(hw, KS8841_WOL_FRAME0_ENABLE, (wol_enable & WAKE_UCAST)); + hw_add_wol_ucast(hw); + hw_cfg_wol(hw, KS8841_WOL_FRAME1_ENABLE, (wol_enable & WAKE_MCAST)); + hw_add_wol_mcast(hw); + hw_cfg_wol(hw, KS8841_WOL_FRAME2_ENABLE, (wol_enable & WAKE_BCAST)); + hw_cfg_wol(hw, KS8841_WOL_FRAME3_ENABLE, (wol_enable & WAKE_ARP)); + hw_add_wol_arp(hw, net_addr); +} + +/** + * hw_init - check driver is correct for the hardware + * @hw: The hardware instance. + * + * This function checks the hardware is correct for this driver and sets the + * hardware up for proper initialization. + * + * Return number of ports or 0 if not right. + */ +static int hw_init(struct ksz_hw *hw) +{ + int rc = 0; + u16 data; + u16 revision; + + /* Set bus speed to 125MHz. */ + writew(BUS_SPEED_125_MHZ, hw->io + KS884X_BUS_CTRL_OFFSET); + + /* Check KSZ884x chip ID. */ + data = readw(hw->io + KS884X_CHIP_ID_OFFSET); + + revision = (data & KS884X_REVISION_MASK) >> KS884X_REVISION_SHIFT; + data &= KS884X_CHIP_ID_MASK_41; + if (REG_CHIP_ID_41 == data) + rc = 1; + else if (REG_CHIP_ID_42 == data) + rc = 2; + else + return 0; + + /* Setup hardware features or bug workarounds. */ + if (revision <= 1) { + hw->features |= SMALL_PACKET_TX_BUG; + if (1 == rc) + hw->features |= HALF_DUPLEX_SIGNAL_BUG; + } + return rc; +} + +/** + * hw_reset - reset the hardware + * @hw: The hardware instance. + * + * This routine resets the hardware. + */ +static void hw_reset(struct ksz_hw *hw) +{ + writew(GLOBAL_SOFTWARE_RESET, hw->io + KS884X_GLOBAL_CTRL_OFFSET); + + /* Wait for device to reset. */ + mdelay(10); + + /* Write 0 to clear device reset. */ + writew(0, hw->io + KS884X_GLOBAL_CTRL_OFFSET); +} + +/** + * hw_setup - setup the hardware + * @hw: The hardware instance. + * + * This routine setup the hardware for proper operation. + */ +static void hw_setup(struct ksz_hw *hw) +{ +#if SET_DEFAULT_LED + u16 data; + + /* Change default LED mode. */ + data = readw(hw->io + KS8842_SWITCH_CTRL_5_OFFSET); + data &= ~LED_MODE; + data |= SET_DEFAULT_LED; + writew(data, hw->io + KS8842_SWITCH_CTRL_5_OFFSET); +#endif + + /* Setup transmit control. */ + hw->tx_cfg = (DMA_TX_PAD_ENABLE | DMA_TX_CRC_ENABLE | + (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_TX_ENABLE); + + /* Setup receive control. */ + hw->rx_cfg = (DMA_RX_BROADCAST | DMA_RX_UNICAST | + (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_RX_ENABLE); + hw->rx_cfg |= KS884X_DMA_RX_MULTICAST; + + /* Hardware cannot handle UDP packet in IP fragments. */ + hw->rx_cfg |= (DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP); + + if (hw->all_multi) + hw->rx_cfg |= DMA_RX_ALL_MULTICAST; + if (hw->promiscuous) + hw->rx_cfg |= DMA_RX_PROMISCUOUS; +} + +/** + * hw_setup_intr - setup interrupt mask + * @hw: The hardware instance. + * + * This routine setup the interrupt mask for proper operation. + */ +static void hw_setup_intr(struct ksz_hw *hw) +{ + hw->intr_mask = KS884X_INT_MASK | KS884X_INT_RX_OVERRUN; +} + +static void ksz_check_desc_num(struct ksz_desc_info *info) +{ +#define MIN_DESC_SHIFT 2 + + int alloc = info->alloc; + int shift; + + shift = 0; + while (!(alloc & 1)) { + shift++; + alloc >>= 1; + } + if (alloc != 1 || shift < MIN_DESC_SHIFT) { + pr_alert("Hardware descriptor numbers not right!\n"); + while (alloc) { + shift++; + alloc >>= 1; + } + if (shift < MIN_DESC_SHIFT) + shift = MIN_DESC_SHIFT; + alloc = 1 << shift; + info->alloc = alloc; + } + info->mask = info->alloc - 1; +} + +static void hw_init_desc(struct ksz_desc_info *desc_info, int transmit) +{ + int i; + u32 phys = desc_info->ring_phys; + struct ksz_hw_desc *desc = desc_info->ring_virt; + struct ksz_desc *cur = desc_info->ring; + struct ksz_desc *previous = NULL; + + for (i = 0; i < desc_info->alloc; i++) { + cur->phw = desc++; + phys += desc_info->size; + previous = cur++; + previous->phw->next = cpu_to_le32(phys); + } + previous->phw->next = cpu_to_le32(desc_info->ring_phys); + previous->sw.buf.rx.end_of_ring = 1; + previous->phw->buf.data = cpu_to_le32(previous->sw.buf.data); + + desc_info->avail = desc_info->alloc; + desc_info->last = desc_info->next = 0; + + desc_info->cur = desc_info->ring; +} + +/** + * hw_set_desc_base - set descriptor base addresses + * @hw: The hardware instance. + * @tx_addr: The transmit descriptor base. + * @rx_addr: The receive descriptor base. + * + * This routine programs the descriptor base addresses after reset. + */ +static void hw_set_desc_base(struct ksz_hw *hw, u32 tx_addr, u32 rx_addr) +{ + /* Set base address of Tx/Rx descriptors. */ + writel(tx_addr, hw->io + KS_DMA_TX_ADDR); + writel(rx_addr, hw->io + KS_DMA_RX_ADDR); +} + +static void hw_reset_pkts(struct ksz_desc_info *info) +{ + info->cur = info->ring; + info->avail = info->alloc; + info->last = info->next = 0; +} + +static inline void hw_resume_rx(struct ksz_hw *hw) +{ + writel(DMA_START, hw->io + KS_DMA_RX_START); +} + +/** + * hw_start_rx - start receiving + * @hw: The hardware instance. + * + * This routine starts the receive function of the hardware. + */ +static void hw_start_rx(struct ksz_hw *hw) +{ + writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL); + + /* Notify when the receive stops. */ + hw->intr_mask |= KS884X_INT_RX_STOPPED; + + writel(DMA_START, hw->io + KS_DMA_RX_START); + hw_ack_intr(hw, KS884X_INT_RX_STOPPED); + hw->rx_stop++; + + /* Variable overflows. */ + if (0 == hw->rx_stop) + hw->rx_stop = 2; +} + +/** + * hw_stop_rx - stop receiving + * @hw: The hardware instance. + * + * This routine stops the receive function of the hardware. + */ +static void hw_stop_rx(struct ksz_hw *hw) +{ + hw->rx_stop = 0; + hw_turn_off_intr(hw, KS884X_INT_RX_STOPPED); + writel((hw->rx_cfg & ~DMA_RX_ENABLE), hw->io + KS_DMA_RX_CTRL); +} + +/** + * hw_start_tx - start transmitting + * @hw: The hardware instance. + * + * This routine starts the transmit function of the hardware. + */ +static void hw_start_tx(struct ksz_hw *hw) +{ + writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL); +} + +/** + * hw_stop_tx - stop transmitting + * @hw: The hardware instance. + * + * This routine stops the transmit function of the hardware. + */ +static void hw_stop_tx(struct ksz_hw *hw) +{ + writel((hw->tx_cfg & ~DMA_TX_ENABLE), hw->io + KS_DMA_TX_CTRL); +} + +/** + * hw_disable - disable hardware + * @hw: The hardware instance. + * + * This routine disables the hardware. + */ +static void hw_disable(struct ksz_hw *hw) +{ + hw_stop_rx(hw); + hw_stop_tx(hw); + hw->enabled = 0; +} + +/** + * hw_enable - enable hardware + * @hw: The hardware instance. + * + * This routine enables the hardware. + */ +static void hw_enable(struct ksz_hw *hw) +{ + hw_start_tx(hw); + hw_start_rx(hw); + hw->enabled = 1; +} + +/** + * hw_alloc_pkt - allocate enough descriptors for transmission + * @hw: The hardware instance. + * @length: The length of the packet. + * @physical: Number of descriptors required. + * + * This function allocates descriptors for transmission. + * + * Return 0 if not successful; 1 for buffer copy; or number of descriptors. + */ +static int hw_alloc_pkt(struct ksz_hw *hw, int length, int physical) +{ + /* Always leave one descriptor free. */ + if (hw->tx_desc_info.avail <= 1) + return 0; + + /* Allocate a descriptor for transmission and mark it current. */ + get_tx_pkt(&hw->tx_desc_info, &hw->tx_desc_info.cur); + hw->tx_desc_info.cur->sw.buf.tx.first_seg = 1; + + /* Keep track of number of transmit descriptors used so far. */ + ++hw->tx_int_cnt; + hw->tx_size += length; + + /* Cannot hold on too much data. */ + if (hw->tx_size >= MAX_TX_HELD_SIZE) + hw->tx_int_cnt = hw->tx_int_mask + 1; + + if (physical > hw->tx_desc_info.avail) + return 1; + + return hw->tx_desc_info.avail; +} + +/** + * hw_send_pkt - mark packet for transmission + * @hw: The hardware instance. + * + * This routine marks the packet for transmission in PCI version. + */ +static void hw_send_pkt(struct ksz_hw *hw) +{ + struct ksz_desc *cur = hw->tx_desc_info.cur; + + cur->sw.buf.tx.last_seg = 1; + + /* Interrupt only after specified number of descriptors used. */ + if (hw->tx_int_cnt > hw->tx_int_mask) { + cur->sw.buf.tx.intr = 1; + hw->tx_int_cnt = 0; + hw->tx_size = 0; + } + + /* KSZ8842 supports port directed transmission. */ + cur->sw.buf.tx.dest_port = hw->dst_ports; + + release_desc(cur); + + writel(0, hw->io + KS_DMA_TX_START); +} + +static int empty_addr(u8 *addr) +{ + u32 *addr1 = (u32 *) addr; + u16 *addr2 = (u16 *) &addr[4]; + + return 0 == *addr1 && 0 == *addr2; +} + +/** + * hw_set_addr - set MAC address + * @hw: The hardware instance. + * + * This routine programs the MAC address of the hardware when the address is + * overridden. + */ +static void hw_set_addr(struct ksz_hw *hw) +{ + int i; + + for (i = 0; i < ETH_ALEN; i++) + writeb(hw->override_addr[MAC_ADDR_ORDER(i)], + hw->io + KS884X_ADDR_0_OFFSET + i); + + sw_set_addr(hw, hw->override_addr); +} + +/** + * hw_read_addr - read MAC address + * @hw: The hardware instance. + * + * This routine retrieves the MAC address of the hardware. + */ +static void hw_read_addr(struct ksz_hw *hw) +{ + int i; + + for (i = 0; i < ETH_ALEN; i++) + hw->perm_addr[MAC_ADDR_ORDER(i)] = readb(hw->io + + KS884X_ADDR_0_OFFSET + i); + + if (!hw->mac_override) { + memcpy(hw->override_addr, hw->perm_addr, ETH_ALEN); + if (empty_addr(hw->override_addr)) { + memcpy(hw->perm_addr, DEFAULT_MAC_ADDRESS, ETH_ALEN); + memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS, + ETH_ALEN); + hw->override_addr[5] += hw->id; + hw_set_addr(hw); + } + } +} + +static void hw_ena_add_addr(struct ksz_hw *hw, int index, u8 *mac_addr) +{ + int i; + u32 mac_addr_lo; + u32 mac_addr_hi; + + mac_addr_hi = 0; + for (i = 0; i < 2; i++) { + mac_addr_hi <<= 8; + mac_addr_hi |= mac_addr[i]; + } + mac_addr_hi |= ADD_ADDR_ENABLE; + mac_addr_lo = 0; + for (i = 2; i < 6; i++) { + mac_addr_lo <<= 8; + mac_addr_lo |= mac_addr[i]; + } + index *= ADD_ADDR_INCR; + + writel(mac_addr_lo, hw->io + index + KS_ADD_ADDR_0_LO); + writel(mac_addr_hi, hw->io + index + KS_ADD_ADDR_0_HI); +} + +static void hw_set_add_addr(struct ksz_hw *hw) +{ + int i; + + for (i = 0; i < ADDITIONAL_ENTRIES; i++) { + if (empty_addr(hw->address[i])) + writel(0, hw->io + ADD_ADDR_INCR * i + + KS_ADD_ADDR_0_HI); + else + hw_ena_add_addr(hw, i, hw->address[i]); + } +} + +static int hw_add_addr(struct ksz_hw *hw, u8 *mac_addr) +{ + int i; + int j = ADDITIONAL_ENTRIES; + + if (ether_addr_equal(hw->override_addr, mac_addr)) + return 0; + for (i = 0; i < hw->addr_list_size; i++) { + if (ether_addr_equal(hw->address[i], mac_addr)) + return 0; + if (ADDITIONAL_ENTRIES == j && empty_addr(hw->address[i])) + j = i; + } + if (j < ADDITIONAL_ENTRIES) { + memcpy(hw->address[j], mac_addr, ETH_ALEN); + hw_ena_add_addr(hw, j, hw->address[j]); + return 0; + } + return -1; +} + +static int hw_del_addr(struct ksz_hw *hw, u8 *mac_addr) +{ + int i; + + for (i = 0; i < hw->addr_list_size; i++) { + if (ether_addr_equal(hw->address[i], mac_addr)) { + eth_zero_addr(hw->address[i]); + writel(0, hw->io + ADD_ADDR_INCR * i + + KS_ADD_ADDR_0_HI); + return 0; + } + } + return -1; +} + +/** + * hw_clr_multicast - clear multicast addresses + * @hw: The hardware instance. + * + * This routine removes all multicast addresses set in the hardware. + */ +static void hw_clr_multicast(struct ksz_hw *hw) +{ + int i; + + for (i = 0; i < HW_MULTICAST_SIZE; i++) { + hw->multi_bits[i] = 0; + + writeb(0, hw->io + KS884X_MULTICAST_0_OFFSET + i); + } +} + +/** + * hw_set_grp_addr - set multicast addresses + * @hw: The hardware instance. + * + * This routine programs multicast addresses for the hardware to accept those + * addresses. + */ +static void hw_set_grp_addr(struct ksz_hw *hw) +{ + int i; + int index; + int position; + int value; + + memset(hw->multi_bits, 0, sizeof(u8) * HW_MULTICAST_SIZE); + + for (i = 0; i < hw->multi_list_size; i++) { + position = (ether_crc(6, hw->multi_list[i]) >> 26) & 0x3f; + index = position >> 3; + value = 1 << (position & 7); + hw->multi_bits[index] |= (u8) value; + } + + for (i = 0; i < HW_MULTICAST_SIZE; i++) + writeb(hw->multi_bits[i], hw->io + KS884X_MULTICAST_0_OFFSET + + i); +} + +/** + * hw_set_multicast - enable or disable all multicast receiving + * @hw: The hardware instance. + * @multicast: To turn on or off the all multicast feature. + * + * This routine enables/disables the hardware to accept all multicast packets. + */ +static void hw_set_multicast(struct ksz_hw *hw, u8 multicast) +{ + /* Stop receiving for reconfiguration. */ + hw_stop_rx(hw); + + if (multicast) + hw->rx_cfg |= DMA_RX_ALL_MULTICAST; + else + hw->rx_cfg &= ~DMA_RX_ALL_MULTICAST; + + if (hw->enabled) + hw_start_rx(hw); +} + +/** + * hw_set_promiscuous - enable or disable promiscuous receiving + * @hw: The hardware instance. + * @prom: To turn on or off the promiscuous feature. + * + * This routine enables/disables the hardware to accept all packets. + */ +static void hw_set_promiscuous(struct ksz_hw *hw, u8 prom) +{ + /* Stop receiving for reconfiguration. */ + hw_stop_rx(hw); + + if (prom) + hw->rx_cfg |= DMA_RX_PROMISCUOUS; + else + hw->rx_cfg &= ~DMA_RX_PROMISCUOUS; + + if (hw->enabled) + hw_start_rx(hw); +} + +/** + * sw_enable - enable the switch + * @hw: The hardware instance. + * @enable: The flag to enable or disable the switch + * + * This routine is used to enable/disable the switch in KSZ8842. + */ +static void sw_enable(struct ksz_hw *hw, int enable) +{ + int port; + + for (port = 0; port < SWITCH_PORT_NUM; port++) { + if (hw->dev_count > 1) { + /* Set port-base vlan membership with host port. */ + sw_cfg_port_base_vlan(hw, port, + HOST_MASK | (1 << port)); + port_set_stp_state(hw, port, STP_STATE_DISABLED); + } else { + sw_cfg_port_base_vlan(hw, port, PORT_MASK); + port_set_stp_state(hw, port, STP_STATE_FORWARDING); + } + } + if (hw->dev_count > 1) + port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE); + else + port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_FORWARDING); + + if (enable) + enable = KS8842_START; + writew(enable, hw->io + KS884X_CHIP_ID_OFFSET); +} + +/** + * sw_setup - setup the switch + * @hw: The hardware instance. + * + * This routine setup the hardware switch engine for default operation. + */ +static void sw_setup(struct ksz_hw *hw) +{ + int port; + + sw_set_global_ctrl(hw); + + /* Enable switch broadcast storm protection at 10% percent rate. */ + sw_init_broad_storm(hw); + hw_cfg_broad_storm(hw, BROADCAST_STORM_PROTECTION_RATE); + for (port = 0; port < SWITCH_PORT_NUM; port++) + sw_ena_broad_storm(hw, port); + + sw_init_prio(hw); + + sw_init_mirror(hw); + + sw_init_prio_rate(hw); + + sw_init_vlan(hw); + + if (hw->features & STP_SUPPORT) + sw_init_stp(hw); + if (!sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_TX_FLOW_CTRL | SWITCH_RX_FLOW_CTRL)) + hw->overrides |= PAUSE_FLOW_CTRL; + sw_enable(hw, 1); +} + +/** + * ksz_start_timer - start kernel timer + * @info: Kernel timer information. + * @time: The time tick. + * + * This routine starts the kernel timer after the specified time tick. + */ +static void ksz_start_timer(struct ksz_timer_info *info, int time) +{ + info->cnt = 0; + info->timer.expires = jiffies + time; + add_timer(&info->timer); + + /* infinity */ + info->max = -1; +} + +/** + * ksz_stop_timer - stop kernel timer + * @info: Kernel timer information. + * + * This routine stops the kernel timer. + */ +static void ksz_stop_timer(struct ksz_timer_info *info) +{ + if (info->max) { + info->max = 0; + del_timer_sync(&info->timer); + } +} + +static void ksz_init_timer(struct ksz_timer_info *info, int period, + void (*function)(struct timer_list *)) +{ + info->max = 0; + info->period = period; + timer_setup(&info->timer, function, 0); +} + +static void ksz_update_timer(struct ksz_timer_info *info) +{ + ++info->cnt; + if (info->max > 0) { + if (info->cnt < info->max) { + info->timer.expires = jiffies + info->period; + add_timer(&info->timer); + } else + info->max = 0; + } else if (info->max < 0) { + info->timer.expires = jiffies + info->period; + add_timer(&info->timer); + } +} + +/** + * ksz_alloc_soft_desc - allocate software descriptors + * @desc_info: Descriptor information structure. + * @transmit: Indication that descriptors are for transmit. + * + * This local function allocates software descriptors for manipulation in + * memory. + * + * Return 0 if successful. + */ +static int ksz_alloc_soft_desc(struct ksz_desc_info *desc_info, int transmit) +{ + desc_info->ring = kcalloc(desc_info->alloc, sizeof(struct ksz_desc), + GFP_KERNEL); + if (!desc_info->ring) + return 1; + hw_init_desc(desc_info, transmit); + return 0; +} + +/** + * ksz_alloc_desc - allocate hardware descriptors + * @adapter: Adapter information structure. + * + * This local function allocates hardware descriptors for receiving and + * transmitting. + * + * Return 0 if successful. + */ +static int ksz_alloc_desc(struct dev_info *adapter) +{ + struct ksz_hw *hw = &adapter->hw; + int offset; + + /* Allocate memory for RX & TX descriptors. */ + adapter->desc_pool.alloc_size = + hw->rx_desc_info.size * hw->rx_desc_info.alloc + + hw->tx_desc_info.size * hw->tx_desc_info.alloc + + DESC_ALIGNMENT; + + adapter->desc_pool.alloc_virt = + dma_alloc_coherent(&adapter->pdev->dev, + adapter->desc_pool.alloc_size, + &adapter->desc_pool.dma_addr, GFP_KERNEL); + if (adapter->desc_pool.alloc_virt == NULL) { + adapter->desc_pool.alloc_size = 0; + return 1; + } + + /* Align to the next cache line boundary. */ + offset = (((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT) ? + (DESC_ALIGNMENT - + ((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT)) : 0); + adapter->desc_pool.virt = adapter->desc_pool.alloc_virt + offset; + adapter->desc_pool.phys = adapter->desc_pool.dma_addr + offset; + + /* Allocate receive/transmit descriptors. */ + hw->rx_desc_info.ring_virt = (struct ksz_hw_desc *) + adapter->desc_pool.virt; + hw->rx_desc_info.ring_phys = adapter->desc_pool.phys; + offset = hw->rx_desc_info.alloc * hw->rx_desc_info.size; + hw->tx_desc_info.ring_virt = (struct ksz_hw_desc *) + (adapter->desc_pool.virt + offset); + hw->tx_desc_info.ring_phys = adapter->desc_pool.phys + offset; + + if (ksz_alloc_soft_desc(&hw->rx_desc_info, 0)) + return 1; + if (ksz_alloc_soft_desc(&hw->tx_desc_info, 1)) + return 1; + + return 0; +} + +/** + * free_dma_buf - release DMA buffer resources + * @adapter: Adapter information structure. + * @dma_buf: pointer to buf + * @direction: to or from device + * + * This routine is just a helper function to release the DMA buffer resources. + */ +static void free_dma_buf(struct dev_info *adapter, struct ksz_dma_buf *dma_buf, + int direction) +{ + dma_unmap_single(&adapter->pdev->dev, dma_buf->dma, dma_buf->len, + direction); + dev_kfree_skb(dma_buf->skb); + dma_buf->skb = NULL; + dma_buf->dma = 0; +} + +/** + * ksz_init_rx_buffers - initialize receive descriptors + * @adapter: Adapter information structure. + * + * This routine initializes DMA buffers for receiving. + */ +static void ksz_init_rx_buffers(struct dev_info *adapter) +{ + int i; + struct ksz_desc *desc; + struct ksz_dma_buf *dma_buf; + struct ksz_hw *hw = &adapter->hw; + struct ksz_desc_info *info = &hw->rx_desc_info; + + for (i = 0; i < hw->rx_desc_info.alloc; i++) { + get_rx_pkt(info, &desc); + + dma_buf = DMA_BUFFER(desc); + if (dma_buf->skb && dma_buf->len != adapter->mtu) + free_dma_buf(adapter, dma_buf, DMA_FROM_DEVICE); + dma_buf->len = adapter->mtu; + if (!dma_buf->skb) + dma_buf->skb = alloc_skb(dma_buf->len, GFP_ATOMIC); + if (dma_buf->skb && !dma_buf->dma) + dma_buf->dma = dma_map_single(&adapter->pdev->dev, + skb_tail_pointer(dma_buf->skb), + dma_buf->len, + DMA_FROM_DEVICE); + + /* Set descriptor. */ + set_rx_buf(desc, dma_buf->dma); + set_rx_len(desc, dma_buf->len); + release_desc(desc); + } +} + +/** + * ksz_alloc_mem - allocate memory for hardware descriptors + * @adapter: Adapter information structure. + * + * This function allocates memory for use by hardware descriptors for receiving + * and transmitting. + * + * Return 0 if successful. + */ +static int ksz_alloc_mem(struct dev_info *adapter) +{ + struct ksz_hw *hw = &adapter->hw; + + /* Determine the number of receive and transmit descriptors. */ + hw->rx_desc_info.alloc = NUM_OF_RX_DESC; + hw->tx_desc_info.alloc = NUM_OF_TX_DESC; + + /* Determine how many descriptors to skip transmit interrupt. */ + hw->tx_int_cnt = 0; + hw->tx_int_mask = NUM_OF_TX_DESC / 4; + if (hw->tx_int_mask > 8) + hw->tx_int_mask = 8; + while (hw->tx_int_mask) { + hw->tx_int_cnt++; + hw->tx_int_mask >>= 1; + } + if (hw->tx_int_cnt) { + hw->tx_int_mask = (1 << (hw->tx_int_cnt - 1)) - 1; + hw->tx_int_cnt = 0; + } + + /* Determine the descriptor size. */ + hw->rx_desc_info.size = + (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) / + DESC_ALIGNMENT) * DESC_ALIGNMENT); + hw->tx_desc_info.size = + (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) / + DESC_ALIGNMENT) * DESC_ALIGNMENT); + if (hw->rx_desc_info.size != sizeof(struct ksz_hw_desc)) + pr_alert("Hardware descriptor size not right!\n"); + ksz_check_desc_num(&hw->rx_desc_info); + ksz_check_desc_num(&hw->tx_desc_info); + + /* Allocate descriptors. */ + if (ksz_alloc_desc(adapter)) + return 1; + + return 0; +} + +/** + * ksz_free_desc - free software and hardware descriptors + * @adapter: Adapter information structure. + * + * This local routine frees the software and hardware descriptors allocated by + * ksz_alloc_desc(). + */ +static void ksz_free_desc(struct dev_info *adapter) +{ + struct ksz_hw *hw = &adapter->hw; + + /* Reset descriptor. */ + hw->rx_desc_info.ring_virt = NULL; + hw->tx_desc_info.ring_virt = NULL; + hw->rx_desc_info.ring_phys = 0; + hw->tx_desc_info.ring_phys = 0; + + /* Free memory. */ + if (adapter->desc_pool.alloc_virt) + dma_free_coherent(&adapter->pdev->dev, + adapter->desc_pool.alloc_size, + adapter->desc_pool.alloc_virt, + adapter->desc_pool.dma_addr); + + /* Reset resource pool. */ + adapter->desc_pool.alloc_size = 0; + adapter->desc_pool.alloc_virt = NULL; + + kfree(hw->rx_desc_info.ring); + hw->rx_desc_info.ring = NULL; + kfree(hw->tx_desc_info.ring); + hw->tx_desc_info.ring = NULL; +} + +/** + * ksz_free_buffers - free buffers used in the descriptors + * @adapter: Adapter information structure. + * @desc_info: Descriptor information structure. + * @direction: to or from device + * + * This local routine frees buffers used in the DMA buffers. + */ +static void ksz_free_buffers(struct dev_info *adapter, + struct ksz_desc_info *desc_info, int direction) +{ + int i; + struct ksz_dma_buf *dma_buf; + struct ksz_desc *desc = desc_info->ring; + + for (i = 0; i < desc_info->alloc; i++) { + dma_buf = DMA_BUFFER(desc); + if (dma_buf->skb) + free_dma_buf(adapter, dma_buf, direction); + desc++; + } +} + +/** + * ksz_free_mem - free all resources used by descriptors + * @adapter: Adapter information structure. + * + * This local routine frees all the resources allocated by ksz_alloc_mem(). + */ +static void ksz_free_mem(struct dev_info *adapter) +{ + /* Free transmit buffers. */ + ksz_free_buffers(adapter, &adapter->hw.tx_desc_info, DMA_TO_DEVICE); + + /* Free receive buffers. */ + ksz_free_buffers(adapter, &adapter->hw.rx_desc_info, DMA_FROM_DEVICE); + + /* Free descriptors. */ + ksz_free_desc(adapter); +} + +static void get_mib_counters(struct ksz_hw *hw, int first, int cnt, + u64 *counter) +{ + int i; + int mib; + int port; + struct ksz_port_mib *port_mib; + + memset(counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM); + for (i = 0, port = first; i < cnt; i++, port++) { + port_mib = &hw->port_mib[port]; + for (mib = port_mib->mib_start; mib < hw->mib_cnt; mib++) + counter[mib] += port_mib->counter[mib]; + } +} + +/** + * send_packet - send packet + * @skb: Socket buffer. + * @dev: Network device. + * + * This routine is used to send a packet out to the network. + */ +static void send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct ksz_desc *desc; + struct ksz_desc *first; + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_desc_info *info = &hw->tx_desc_info; + struct ksz_dma_buf *dma_buf; + int len; + int last_frag = skb_shinfo(skb)->nr_frags; + + /* + * KSZ8842 with multiple device interfaces needs to be told which port + * to send. + */ + if (hw->dev_count > 1) + hw->dst_ports = 1 << priv->port.first_port; + + /* Hardware will pad the length to 60. */ + len = skb->len; + + /* Remember the very first descriptor. */ + first = info->cur; + desc = first; + + dma_buf = DMA_BUFFER(desc); + if (last_frag) { + int frag; + skb_frag_t *this_frag; + + dma_buf->len = skb_headlen(skb); + + dma_buf->dma = dma_map_single(&hw_priv->pdev->dev, skb->data, + dma_buf->len, DMA_TO_DEVICE); + set_tx_buf(desc, dma_buf->dma); + set_tx_len(desc, dma_buf->len); + + frag = 0; + do { + this_frag = &skb_shinfo(skb)->frags[frag]; + + /* Get a new descriptor. */ + get_tx_pkt(info, &desc); + + /* Keep track of descriptors used so far. */ + ++hw->tx_int_cnt; + + dma_buf = DMA_BUFFER(desc); + dma_buf->len = skb_frag_size(this_frag); + + dma_buf->dma = dma_map_single(&hw_priv->pdev->dev, + skb_frag_address(this_frag), + dma_buf->len, + DMA_TO_DEVICE); + set_tx_buf(desc, dma_buf->dma); + set_tx_len(desc, dma_buf->len); + + frag++; + if (frag == last_frag) + break; + + /* Do not release the last descriptor here. */ + release_desc(desc); + } while (1); + + /* current points to the last descriptor. */ + info->cur = desc; + + /* Release the first descriptor. */ + release_desc(first); + } else { + dma_buf->len = len; + + dma_buf->dma = dma_map_single(&hw_priv->pdev->dev, skb->data, + dma_buf->len, DMA_TO_DEVICE); + set_tx_buf(desc, dma_buf->dma); + set_tx_len(desc, dma_buf->len); + } + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + (desc)->sw.buf.tx.csum_gen_tcp = 1; + (desc)->sw.buf.tx.csum_gen_udp = 1; + } + + /* + * The last descriptor holds the packet so that it can be returned to + * network subsystem after all descriptors are transmitted. + */ + dma_buf->skb = skb; + + hw_send_pkt(hw); + + /* Update transmit statistics. */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += len; +} + +/** + * transmit_cleanup - clean up transmit descriptors + * @hw_priv: Network device. + * @normal: break if owned + * + * This routine is called to clean up the transmitted buffers. + */ +static void transmit_cleanup(struct dev_info *hw_priv, int normal) +{ + int last; + union desc_stat status; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_desc_info *info = &hw->tx_desc_info; + struct ksz_desc *desc; + struct ksz_dma_buf *dma_buf; + struct net_device *dev = NULL; + + spin_lock_irq(&hw_priv->hwlock); + last = info->last; + + while (info->avail < info->alloc) { + /* Get next descriptor which is not hardware owned. */ + desc = &info->ring[last]; + status.data = le32_to_cpu(desc->phw->ctrl.data); + if (status.tx.hw_owned) { + if (normal) + break; + else + reset_desc(desc, status); + } + + dma_buf = DMA_BUFFER(desc); + dma_unmap_single(&hw_priv->pdev->dev, dma_buf->dma, + dma_buf->len, DMA_TO_DEVICE); + + /* This descriptor contains the last buffer in the packet. */ + if (dma_buf->skb) { + dev = dma_buf->skb->dev; + + /* Release the packet back to network subsystem. */ + dev_kfree_skb_irq(dma_buf->skb); + dma_buf->skb = NULL; + } + + /* Free the transmitted descriptor. */ + last++; + last &= info->mask; + info->avail++; + } + info->last = last; + spin_unlock_irq(&hw_priv->hwlock); + + /* Notify the network subsystem that the packet has been sent. */ + if (dev) + netif_trans_update(dev); +} + +/** + * transmit_done - transmit done processing + * @hw_priv: Network device. + * + * This routine is called when the transmit interrupt is triggered, indicating + * either a packet is sent successfully or there are transmit errors. + */ +static void tx_done(struct dev_info *hw_priv) +{ + struct ksz_hw *hw = &hw_priv->hw; + int port; + + transmit_cleanup(hw_priv, 1); + + for (port = 0; port < hw->dev_count; port++) { + struct net_device *dev = hw->port_info[port].pdev; + + if (netif_running(dev) && netif_queue_stopped(dev)) + netif_wake_queue(dev); + } +} + +static inline void copy_old_skb(struct sk_buff *old, struct sk_buff *skb) +{ + skb->dev = old->dev; + skb->protocol = old->protocol; + skb->ip_summed = old->ip_summed; + skb->csum = old->csum; + skb_set_network_header(skb, ETH_HLEN); + + dev_consume_skb_any(old); +} + +/** + * netdev_tx - send out packet + * @skb: Socket buffer. + * @dev: Network device. + * + * This function is used by the upper network layer to send out a packet. + * + * Return 0 if successful; otherwise an error code indicating failure. + */ +static netdev_tx_t netdev_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + int left; + int num = 1; + int rc = 0; + + if (hw->features & SMALL_PACKET_TX_BUG) { + struct sk_buff *org_skb = skb; + + if (skb->len <= 48) { + if (skb_end_pointer(skb) - skb->data >= 50) { + memset(&skb->data[skb->len], 0, 50 - skb->len); + skb->len = 50; + } else { + skb = netdev_alloc_skb(dev, 50); + if (!skb) + return NETDEV_TX_BUSY; + memcpy(skb->data, org_skb->data, org_skb->len); + memset(&skb->data[org_skb->len], 0, + 50 - org_skb->len); + skb->len = 50; + copy_old_skb(org_skb, skb); + } + } + } + + spin_lock_irq(&hw_priv->hwlock); + + num = skb_shinfo(skb)->nr_frags + 1; + left = hw_alloc_pkt(hw, skb->len, num); + if (left) { + if (left < num || + (CHECKSUM_PARTIAL == skb->ip_summed && + skb->protocol == htons(ETH_P_IPV6))) { + struct sk_buff *org_skb = skb; + + skb = netdev_alloc_skb(dev, org_skb->len); + if (!skb) { + rc = NETDEV_TX_BUSY; + goto unlock; + } + skb_copy_and_csum_dev(org_skb, skb->data); + org_skb->ip_summed = CHECKSUM_NONE; + skb->len = org_skb->len; + copy_old_skb(org_skb, skb); + } + send_packet(skb, dev); + if (left <= num) + netif_stop_queue(dev); + } else { + /* Stop the transmit queue until packet is allocated. */ + netif_stop_queue(dev); + rc = NETDEV_TX_BUSY; + } +unlock: + spin_unlock_irq(&hw_priv->hwlock); + + return rc; +} + +/** + * netdev_tx_timeout - transmit timeout processing + * @dev: Network device. + * @txqueue: index of hanging queue + * + * This routine is called when the transmit timer expires. That indicates the + * hardware is not running correctly because transmit interrupts are not + * triggered to free up resources so that the transmit routine can continue + * sending out packets. The hardware is reset to correct the problem. + */ +static void netdev_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + static unsigned long last_reset; + + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + int port; + + if (hw->dev_count > 1) { + /* + * Only reset the hardware if time between calls is long + * enough. + */ + if (time_before_eq(jiffies, last_reset + dev->watchdog_timeo)) + hw_priv = NULL; + } + + last_reset = jiffies; + if (hw_priv) { + hw_dis_intr(hw); + hw_disable(hw); + + transmit_cleanup(hw_priv, 0); + hw_reset_pkts(&hw->rx_desc_info); + hw_reset_pkts(&hw->tx_desc_info); + ksz_init_rx_buffers(hw_priv); + + hw_reset(hw); + + hw_set_desc_base(hw, + hw->tx_desc_info.ring_phys, + hw->rx_desc_info.ring_phys); + hw_set_addr(hw); + if (hw->all_multi) + hw_set_multicast(hw, hw->all_multi); + else if (hw->multi_list_size) + hw_set_grp_addr(hw); + + if (hw->dev_count > 1) { + hw_set_add_addr(hw); + for (port = 0; port < SWITCH_PORT_NUM; port++) { + struct net_device *port_dev; + + port_set_stp_state(hw, port, + STP_STATE_DISABLED); + + port_dev = hw->port_info[port].pdev; + if (netif_running(port_dev)) + port_set_stp_state(hw, port, + STP_STATE_SIMPLE); + } + } + + hw_enable(hw); + hw_ena_intr(hw); + } + + netif_trans_update(dev); + netif_wake_queue(dev); +} + +static inline void csum_verified(struct sk_buff *skb) +{ + unsigned short protocol; + struct iphdr *iph; + + protocol = skb->protocol; + skb_reset_network_header(skb); + iph = (struct iphdr *) skb_network_header(skb); + if (protocol == htons(ETH_P_8021Q)) { + protocol = iph->tot_len; + skb_set_network_header(skb, VLAN_HLEN); + iph = (struct iphdr *) skb_network_header(skb); + } + if (protocol == htons(ETH_P_IP)) { + if (iph->protocol == IPPROTO_TCP) + skb->ip_summed = CHECKSUM_UNNECESSARY; + } +} + +static inline int rx_proc(struct net_device *dev, struct ksz_hw* hw, + struct ksz_desc *desc, union desc_stat status) +{ + int packet_len; + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_dma_buf *dma_buf; + struct sk_buff *skb; + + /* Received length includes 4-byte CRC. */ + packet_len = status.rx.frame_len - 4; + + dma_buf = DMA_BUFFER(desc); + dma_sync_single_for_cpu(&hw_priv->pdev->dev, dma_buf->dma, + packet_len + 4, DMA_FROM_DEVICE); + + do { + /* skb->data != skb->head */ + skb = netdev_alloc_skb(dev, packet_len + 2); + if (!skb) { + dev->stats.rx_dropped++; + return -ENOMEM; + } + + /* + * Align socket buffer in 4-byte boundary for better + * performance. + */ + skb_reserve(skb, 2); + + skb_put_data(skb, dma_buf->skb->data, packet_len); + } while (0); + + skb->protocol = eth_type_trans(skb, dev); + + if (hw->rx_cfg & (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP)) + csum_verified(skb); + + /* Update receive statistics. */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += packet_len; + + /* Notify upper layer for received packet. */ + netif_rx(skb); + + return 0; +} + +static int dev_rcv_packets(struct dev_info *hw_priv) +{ + int next; + union desc_stat status; + struct ksz_hw *hw = &hw_priv->hw; + struct net_device *dev = hw->port_info[0].pdev; + struct ksz_desc_info *info = &hw->rx_desc_info; + int left = info->alloc; + struct ksz_desc *desc; + int received = 0; + + next = info->next; + while (left--) { + /* Get next descriptor which is not hardware owned. */ + desc = &info->ring[next]; + status.data = le32_to_cpu(desc->phw->ctrl.data); + if (status.rx.hw_owned) + break; + + /* Status valid only when last descriptor bit is set. */ + if (status.rx.last_desc && status.rx.first_desc) { + if (rx_proc(dev, hw, desc, status)) + goto release_packet; + received++; + } + +release_packet: + release_desc(desc); + next++; + next &= info->mask; + } + info->next = next; + + return received; +} + +static int port_rcv_packets(struct dev_info *hw_priv) +{ + int next; + union desc_stat status; + struct ksz_hw *hw = &hw_priv->hw; + struct net_device *dev = hw->port_info[0].pdev; + struct ksz_desc_info *info = &hw->rx_desc_info; + int left = info->alloc; + struct ksz_desc *desc; + int received = 0; + + next = info->next; + while (left--) { + /* Get next descriptor which is not hardware owned. */ + desc = &info->ring[next]; + status.data = le32_to_cpu(desc->phw->ctrl.data); + if (status.rx.hw_owned) + break; + + if (hw->dev_count > 1) { + /* Get received port number. */ + int p = HW_TO_DEV_PORT(status.rx.src_port); + + dev = hw->port_info[p].pdev; + if (!netif_running(dev)) + goto release_packet; + } + + /* Status valid only when last descriptor bit is set. */ + if (status.rx.last_desc && status.rx.first_desc) { + if (rx_proc(dev, hw, desc, status)) + goto release_packet; + received++; + } + +release_packet: + release_desc(desc); + next++; + next &= info->mask; + } + info->next = next; + + return received; +} + +static int dev_rcv_special(struct dev_info *hw_priv) +{ + int next; + union desc_stat status; + struct ksz_hw *hw = &hw_priv->hw; + struct net_device *dev = hw->port_info[0].pdev; + struct ksz_desc_info *info = &hw->rx_desc_info; + int left = info->alloc; + struct ksz_desc *desc; + int received = 0; + + next = info->next; + while (left--) { + /* Get next descriptor which is not hardware owned. */ + desc = &info->ring[next]; + status.data = le32_to_cpu(desc->phw->ctrl.data); + if (status.rx.hw_owned) + break; + + if (hw->dev_count > 1) { + /* Get received port number. */ + int p = HW_TO_DEV_PORT(status.rx.src_port); + + dev = hw->port_info[p].pdev; + if (!netif_running(dev)) + goto release_packet; + } + + /* Status valid only when last descriptor bit is set. */ + if (status.rx.last_desc && status.rx.first_desc) { + /* + * Receive without error. With receive errors + * disabled, packets with receive errors will be + * dropped, so no need to check the error bit. + */ + if (!status.rx.error || (status.data & + KS_DESC_RX_ERROR_COND) == + KS_DESC_RX_ERROR_TOO_LONG) { + if (rx_proc(dev, hw, desc, status)) + goto release_packet; + received++; + } else { + struct dev_priv *priv = netdev_priv(dev); + + /* Update receive error statistics. */ + priv->port.counter[OID_COUNTER_RCV_ERROR]++; + } + } + +release_packet: + release_desc(desc); + next++; + next &= info->mask; + } + info->next = next; + + return received; +} + +static void rx_proc_task(struct tasklet_struct *t) +{ + struct dev_info *hw_priv = from_tasklet(hw_priv, t, rx_tasklet); + struct ksz_hw *hw = &hw_priv->hw; + + if (!hw->enabled) + return; + if (unlikely(!hw_priv->dev_rcv(hw_priv))) { + + /* In case receive process is suspended because of overrun. */ + hw_resume_rx(hw); + + /* tasklets are interruptible. */ + spin_lock_irq(&hw_priv->hwlock); + hw_turn_on_intr(hw, KS884X_INT_RX_MASK); + spin_unlock_irq(&hw_priv->hwlock); + } else { + hw_ack_intr(hw, KS884X_INT_RX); + tasklet_schedule(&hw_priv->rx_tasklet); + } +} + +static void tx_proc_task(struct tasklet_struct *t) +{ + struct dev_info *hw_priv = from_tasklet(hw_priv, t, tx_tasklet); + struct ksz_hw *hw = &hw_priv->hw; + + hw_ack_intr(hw, KS884X_INT_TX_MASK); + + tx_done(hw_priv); + + /* tasklets are interruptible. */ + spin_lock_irq(&hw_priv->hwlock); + hw_turn_on_intr(hw, KS884X_INT_TX); + spin_unlock_irq(&hw_priv->hwlock); +} + +static inline void handle_rx_stop(struct ksz_hw *hw) +{ + /* Receive just has been stopped. */ + if (0 == hw->rx_stop) + hw->intr_mask &= ~KS884X_INT_RX_STOPPED; + else if (hw->rx_stop > 1) { + if (hw->enabled && (hw->rx_cfg & DMA_RX_ENABLE)) { + hw_start_rx(hw); + } else { + hw->intr_mask &= ~KS884X_INT_RX_STOPPED; + hw->rx_stop = 0; + } + } else + /* Receive just has been started. */ + hw->rx_stop++; +} + +/** + * netdev_intr - interrupt handling + * @irq: Interrupt number. + * @dev_id: Network device. + * + * This function is called by upper network layer to signal interrupt. + * + * Return IRQ_HANDLED if interrupt is handled. + */ +static irqreturn_t netdev_intr(int irq, void *dev_id) +{ + uint int_enable = 0; + struct net_device *dev = (struct net_device *) dev_id; + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + spin_lock(&hw_priv->hwlock); + + hw_read_intr(hw, &int_enable); + + /* Not our interrupt! */ + if (!int_enable) { + spin_unlock(&hw_priv->hwlock); + return IRQ_NONE; + } + + do { + hw_ack_intr(hw, int_enable); + int_enable &= hw->intr_mask; + + if (unlikely(int_enable & KS884X_INT_TX_MASK)) { + hw_dis_intr_bit(hw, KS884X_INT_TX_MASK); + tasklet_schedule(&hw_priv->tx_tasklet); + } + + if (likely(int_enable & KS884X_INT_RX)) { + hw_dis_intr_bit(hw, KS884X_INT_RX); + tasklet_schedule(&hw_priv->rx_tasklet); + } + + if (unlikely(int_enable & KS884X_INT_RX_OVERRUN)) { + dev->stats.rx_fifo_errors++; + hw_resume_rx(hw); + } + + if (unlikely(int_enable & KS884X_INT_PHY)) { + struct ksz_port *port = &priv->port; + + hw->features |= LINK_INT_WORKING; + port_get_link_speed(port); + } + + if (unlikely(int_enable & KS884X_INT_RX_STOPPED)) { + handle_rx_stop(hw); + break; + } + + if (unlikely(int_enable & KS884X_INT_TX_STOPPED)) { + u32 data; + + hw->intr_mask &= ~KS884X_INT_TX_STOPPED; + pr_info("Tx stopped\n"); + data = readl(hw->io + KS_DMA_TX_CTRL); + if (!(data & DMA_TX_ENABLE)) + pr_info("Tx disabled\n"); + break; + } + } while (0); + + hw_ena_intr(hw); + + spin_unlock(&hw_priv->hwlock); + + return IRQ_HANDLED; +} + +/* + * Linux network device functions + */ + +static unsigned long next_jiffies; + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void netdev_netpoll(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + + hw_dis_intr(&hw_priv->hw); + netdev_intr(dev->irq, dev); +} +#endif + +static void bridge_change(struct ksz_hw *hw) +{ + int port; + u8 member; + struct ksz_switch *sw = hw->ksz_switch; + + /* No ports in forwarding state. */ + if (!sw->member) { + port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE); + sw_block_addr(hw); + } + for (port = 0; port < SWITCH_PORT_NUM; port++) { + if (STP_STATE_FORWARDING == sw->port_cfg[port].stp_state) + member = HOST_MASK | sw->member; + else + member = HOST_MASK | (1 << port); + if (member != sw->port_cfg[port].member) + sw_cfg_port_base_vlan(hw, port, member); + } +} + +/** + * netdev_close - close network device + * @dev: Network device. + * + * This function process the close operation of network device. This is caused + * by the user command "ifconfig ethX down." + * + * Return 0 if successful; otherwise an error code indicating failure. + */ +static int netdev_close(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_port *port = &priv->port; + struct ksz_hw *hw = &hw_priv->hw; + int pi; + + netif_stop_queue(dev); + + ksz_stop_timer(&priv->monitor_timer_info); + + /* Need to shut the port manually in multiple device interfaces mode. */ + if (hw->dev_count > 1) { + port_set_stp_state(hw, port->first_port, STP_STATE_DISABLED); + + /* Port is closed. Need to change bridge setting. */ + if (hw->features & STP_SUPPORT) { + pi = 1 << port->first_port; + if (hw->ksz_switch->member & pi) { + hw->ksz_switch->member &= ~pi; + bridge_change(hw); + } + } + } + if (port->first_port > 0) + hw_del_addr(hw, dev->dev_addr); + if (!hw_priv->wol_enable) + port_set_power_saving(port, true); + + if (priv->multicast) + --hw->all_multi; + if (priv->promiscuous) + --hw->promiscuous; + + hw_priv->opened--; + if (!(hw_priv->opened)) { + ksz_stop_timer(&hw_priv->mib_timer_info); + flush_work(&hw_priv->mib_read); + + hw_dis_intr(hw); + hw_disable(hw); + hw_clr_multicast(hw); + + /* Delay for receive task to stop scheduling itself. */ + msleep(2000 / HZ); + + tasklet_kill(&hw_priv->rx_tasklet); + tasklet_kill(&hw_priv->tx_tasklet); + free_irq(dev->irq, hw_priv->dev); + + transmit_cleanup(hw_priv, 0); + hw_reset_pkts(&hw->rx_desc_info); + hw_reset_pkts(&hw->tx_desc_info); + + /* Clean out static MAC table when the switch is shutdown. */ + if (hw->features & STP_SUPPORT) + sw_clr_sta_mac_table(hw); + } + + return 0; +} + +static void hw_cfg_huge_frame(struct dev_info *hw_priv, struct ksz_hw *hw) +{ + if (hw->ksz_switch) { + u32 data; + + data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET); + if (hw->features & RX_HUGE_FRAME) + data |= SWITCH_HUGE_PACKET; + else + data &= ~SWITCH_HUGE_PACKET; + writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET); + } + if (hw->features & RX_HUGE_FRAME) { + hw->rx_cfg |= DMA_RX_ERROR; + hw_priv->dev_rcv = dev_rcv_special; + } else { + hw->rx_cfg &= ~DMA_RX_ERROR; + if (hw->dev_count > 1) + hw_priv->dev_rcv = port_rcv_packets; + else + hw_priv->dev_rcv = dev_rcv_packets; + } +} + +static int prepare_hardware(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + int rc = 0; + + /* Remember the network device that requests interrupts. */ + hw_priv->dev = dev; + rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev); + if (rc) + return rc; + tasklet_setup(&hw_priv->rx_tasklet, rx_proc_task); + tasklet_setup(&hw_priv->tx_tasklet, tx_proc_task); + + hw->promiscuous = 0; + hw->all_multi = 0; + hw->multi_list_size = 0; + + hw_reset(hw); + + hw_set_desc_base(hw, + hw->tx_desc_info.ring_phys, hw->rx_desc_info.ring_phys); + hw_set_addr(hw); + hw_cfg_huge_frame(hw_priv, hw); + ksz_init_rx_buffers(hw_priv); + return 0; +} + +static void set_media_state(struct net_device *dev, int media_state) +{ + struct dev_priv *priv = netdev_priv(dev); + + if (media_state == priv->media_state) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + netif_info(priv, link, dev, "link %s\n", + media_state == priv->media_state ? "on" : "off"); +} + +/** + * netdev_open - open network device + * @dev: Network device. + * + * This function process the open operation of network device. This is caused + * by the user command "ifconfig ethX up." + * + * Return 0 if successful; otherwise an error code indicating failure. + */ +static int netdev_open(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port *port = &priv->port; + int i; + int p; + int rc = 0; + + priv->multicast = 0; + priv->promiscuous = 0; + + /* Reset device statistics. */ + memset(&dev->stats, 0, sizeof(struct net_device_stats)); + memset((void *) port->counter, 0, + (sizeof(u64) * OID_COUNTER_LAST)); + + if (!(hw_priv->opened)) { + rc = prepare_hardware(dev); + if (rc) + return rc; + for (i = 0; i < hw->mib_port_cnt; i++) { + if (next_jiffies < jiffies) + next_jiffies = jiffies + HZ * 2; + else + next_jiffies += HZ * 1; + hw_priv->counter[i].time = next_jiffies; + hw->port_mib[i].state = media_disconnected; + port_init_cnt(hw, i); + } + if (hw->ksz_switch) + hw->port_mib[HOST_PORT].state = media_connected; + else { + hw_add_wol_bcast(hw); + hw_cfg_wol_pme(hw, 0); + hw_clr_wol_pme_status(&hw_priv->hw); + } + } + port_set_power_saving(port, false); + + for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) { + /* + * Initialize to invalid value so that link detection + * is done. + */ + hw->port_info[p].partner = 0xFF; + hw->port_info[p].state = media_disconnected; + } + + /* Need to open the port in multiple device interfaces mode. */ + if (hw->dev_count > 1) { + port_set_stp_state(hw, port->first_port, STP_STATE_SIMPLE); + if (port->first_port > 0) + hw_add_addr(hw, dev->dev_addr); + } + + port_get_link_speed(port); + if (port->force_link) + port_force_link_speed(port); + else + port_set_link_speed(port); + + if (!(hw_priv->opened)) { + hw_setup_intr(hw); + hw_enable(hw); + hw_ena_intr(hw); + + if (hw->mib_port_cnt) + ksz_start_timer(&hw_priv->mib_timer_info, + hw_priv->mib_timer_info.period); + } + + hw_priv->opened++; + + ksz_start_timer(&priv->monitor_timer_info, + priv->monitor_timer_info.period); + + priv->media_state = port->linked->state; + + set_media_state(dev, media_connected); + netif_start_queue(dev); + + return 0; +} + +/* RX errors = rx_errors */ +/* RX dropped = rx_dropped */ +/* RX overruns = rx_fifo_errors */ +/* RX frame = rx_crc_errors + rx_frame_errors + rx_length_errors */ +/* TX errors = tx_errors */ +/* TX dropped = tx_dropped */ +/* TX overruns = tx_fifo_errors */ +/* TX carrier = tx_aborted_errors + tx_carrier_errors + tx_window_errors */ +/* collisions = collisions */ + +/** + * netdev_query_statistics - query network device statistics + * @dev: Network device. + * + * This function returns the statistics of the network device. The device + * needs not be opened. + * + * Return network device statistics. + */ +static struct net_device_stats *netdev_query_statistics(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct ksz_port *port = &priv->port; + struct ksz_hw *hw = &priv->adapter->hw; + struct ksz_port_mib *mib; + int i; + int p; + + dev->stats.rx_errors = port->counter[OID_COUNTER_RCV_ERROR]; + dev->stats.tx_errors = port->counter[OID_COUNTER_XMIT_ERROR]; + + /* Reset to zero to add count later. */ + dev->stats.multicast = 0; + dev->stats.collisions = 0; + dev->stats.rx_length_errors = 0; + dev->stats.rx_crc_errors = 0; + dev->stats.rx_frame_errors = 0; + dev->stats.tx_window_errors = 0; + + for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) { + mib = &hw->port_mib[p]; + + dev->stats.multicast += (unsigned long) + mib->counter[MIB_COUNTER_RX_MULTICAST]; + + dev->stats.collisions += (unsigned long) + mib->counter[MIB_COUNTER_TX_TOTAL_COLLISION]; + + dev->stats.rx_length_errors += (unsigned long)( + mib->counter[MIB_COUNTER_RX_UNDERSIZE] + + mib->counter[MIB_COUNTER_RX_FRAGMENT] + + mib->counter[MIB_COUNTER_RX_OVERSIZE] + + mib->counter[MIB_COUNTER_RX_JABBER]); + dev->stats.rx_crc_errors += (unsigned long) + mib->counter[MIB_COUNTER_RX_CRC_ERR]; + dev->stats.rx_frame_errors += (unsigned long)( + mib->counter[MIB_COUNTER_RX_ALIGNMENT_ERR] + + mib->counter[MIB_COUNTER_RX_SYMBOL_ERR]); + + dev->stats.tx_window_errors += (unsigned long) + mib->counter[MIB_COUNTER_TX_LATE_COLLISION]; + } + + return &dev->stats; +} + +/** + * netdev_set_mac_address - set network device MAC address + * @dev: Network device. + * @addr: Buffer of MAC address. + * + * This function is used to set the MAC address of the network device. + * + * Return 0 to indicate success. + */ +static int netdev_set_mac_address(struct net_device *dev, void *addr) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct sockaddr *mac = addr; + uint interrupt; + + if (priv->port.first_port > 0) + hw_del_addr(hw, dev->dev_addr); + else { + hw->mac_override = 1; + memcpy(hw->override_addr, mac->sa_data, ETH_ALEN); + } + + memcpy(dev->dev_addr, mac->sa_data, ETH_ALEN); + + interrupt = hw_block_intr(hw); + + if (priv->port.first_port > 0) + hw_add_addr(hw, dev->dev_addr); + else + hw_set_addr(hw); + hw_restore_intr(hw, interrupt); + + return 0; +} + +static void dev_set_promiscuous(struct net_device *dev, struct dev_priv *priv, + struct ksz_hw *hw, int promiscuous) +{ + if (promiscuous != priv->promiscuous) { + u8 prev_state = hw->promiscuous; + + if (promiscuous) + ++hw->promiscuous; + else + --hw->promiscuous; + priv->promiscuous = promiscuous; + + /* Turn on/off promiscuous mode. */ + if (hw->promiscuous <= 1 && prev_state <= 1) + hw_set_promiscuous(hw, hw->promiscuous); + + /* + * Port is not in promiscuous mode, meaning it is released + * from the bridge. + */ + if ((hw->features & STP_SUPPORT) && !promiscuous && + netif_is_bridge_port(dev)) { + struct ksz_switch *sw = hw->ksz_switch; + int port = priv->port.first_port; + + port_set_stp_state(hw, port, STP_STATE_DISABLED); + port = 1 << port; + if (sw->member & port) { + sw->member &= ~port; + bridge_change(hw); + } + } + } +} + +static void dev_set_multicast(struct dev_priv *priv, struct ksz_hw *hw, + int multicast) +{ + if (multicast != priv->multicast) { + u8 all_multi = hw->all_multi; + + if (multicast) + ++hw->all_multi; + else + --hw->all_multi; + priv->multicast = multicast; + + /* Turn on/off all multicast mode. */ + if (hw->all_multi <= 1 && all_multi <= 1) + hw_set_multicast(hw, hw->all_multi); + } +} + +/** + * netdev_set_rx_mode + * @dev: Network device. + * + * This routine is used to set multicast addresses or put the network device + * into promiscuous mode. + */ +static void netdev_set_rx_mode(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct netdev_hw_addr *ha; + int multicast = (dev->flags & IFF_ALLMULTI); + + dev_set_promiscuous(dev, priv, hw, (dev->flags & IFF_PROMISC)); + + if (hw_priv->hw.dev_count > 1) + multicast |= (dev->flags & IFF_MULTICAST); + dev_set_multicast(priv, hw, multicast); + + /* Cannot use different hashes in multiple device interfaces mode. */ + if (hw_priv->hw.dev_count > 1) + return; + + if ((dev->flags & IFF_MULTICAST) && !netdev_mc_empty(dev)) { + int i = 0; + + /* List too big to support so turn on all multicast mode. */ + if (netdev_mc_count(dev) > MAX_MULTICAST_LIST) { + if (MAX_MULTICAST_LIST != hw->multi_list_size) { + hw->multi_list_size = MAX_MULTICAST_LIST; + ++hw->all_multi; + hw_set_multicast(hw, hw->all_multi); + } + return; + } + + netdev_for_each_mc_addr(ha, dev) { + if (i >= MAX_MULTICAST_LIST) + break; + memcpy(hw->multi_list[i++], ha->addr, ETH_ALEN); + } + hw->multi_list_size = (u8) i; + hw_set_grp_addr(hw); + } else { + if (MAX_MULTICAST_LIST == hw->multi_list_size) { + --hw->all_multi; + hw_set_multicast(hw, hw->all_multi); + } + hw->multi_list_size = 0; + hw_clr_multicast(hw); + } +} + +static int netdev_change_mtu(struct net_device *dev, int new_mtu) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + int hw_mtu; + + if (netif_running(dev)) + return -EBUSY; + + /* Cannot use different MTU in multiple device interfaces mode. */ + if (hw->dev_count > 1) + if (dev != hw_priv->dev) + return 0; + + hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4; + if (hw_mtu > REGULAR_RX_BUF_SIZE) { + hw->features |= RX_HUGE_FRAME; + hw_mtu = MAX_RX_BUF_SIZE; + } else { + hw->features &= ~RX_HUGE_FRAME; + hw_mtu = REGULAR_RX_BUF_SIZE; + } + hw_mtu = (hw_mtu + 3) & ~3; + hw_priv->mtu = hw_mtu; + dev->mtu = new_mtu; + + return 0; +} + +/** + * netdev_ioctl - I/O control processing + * @dev: Network device. + * @ifr: Interface request structure. + * @cmd: I/O control code. + * + * This function is used to process I/O control calls. + * + * Return 0 to indicate success. + */ +static int netdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port *port = &priv->port; + int result = 0; + struct mii_ioctl_data *data = if_mii(ifr); + + if (down_interruptible(&priv->proc_sem)) + return -ERESTARTSYS; + + switch (cmd) { + /* Get address of MII PHY in use. */ + case SIOCGMIIPHY: + data->phy_id = priv->id; + fallthrough; + + /* Read MII PHY register. */ + case SIOCGMIIREG: + if (data->phy_id != priv->id || data->reg_num >= 6) + result = -EIO; + else + hw_r_phy(hw, port->linked->port_id, data->reg_num, + &data->val_out); + break; + + /* Write MII PHY register. */ + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + result = -EPERM; + else if (data->phy_id != priv->id || data->reg_num >= 6) + result = -EIO; + else + hw_w_phy(hw, port->linked->port_id, data->reg_num, + data->val_in); + break; + + default: + result = -EOPNOTSUPP; + } + + up(&priv->proc_sem); + + return result; +} + +/* + * MII support + */ + +/** + * mdio_read - read PHY register + * @dev: Network device. + * @phy_id: The PHY id. + * @reg_num: The register number. + * + * This function returns the PHY register value. + * + * Return the register value. + */ +static int mdio_read(struct net_device *dev, int phy_id, int reg_num) +{ + struct dev_priv *priv = netdev_priv(dev); + struct ksz_port *port = &priv->port; + struct ksz_hw *hw = port->hw; + u16 val_out; + + hw_r_phy(hw, port->linked->port_id, reg_num << 1, &val_out); + return val_out; +} + +/** + * mdio_write - set PHY register + * @dev: Network device. + * @phy_id: The PHY id. + * @reg_num: The register number. + * @val: The register value. + * + * This procedure sets the PHY register value. + */ +static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val) +{ + struct dev_priv *priv = netdev_priv(dev); + struct ksz_port *port = &priv->port; + struct ksz_hw *hw = port->hw; + int i; + int pi; + + for (i = 0, pi = port->first_port; i < port->port_cnt; i++, pi++) + hw_w_phy(hw, pi, reg_num << 1, val); +} + +/* + * ethtool support + */ + +#define EEPROM_SIZE 0x40 + +static u16 eeprom_data[EEPROM_SIZE] = { 0 }; + +#define ADVERTISED_ALL \ + (ADVERTISED_10baseT_Half | \ + ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | \ + ADVERTISED_100baseT_Full) + +/* These functions use the MII functions in mii.c. */ + +/** + * netdev_get_link_ksettings - get network device settings + * @dev: Network device. + * @cmd: Ethtool command. + * + * This function queries the PHY and returns its state in the ethtool command. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + + mutex_lock(&hw_priv->lock); + mii_ethtool_get_link_ksettings(&priv->mii_if, cmd); + ethtool_link_ksettings_add_link_mode(cmd, advertising, TP); + mutex_unlock(&hw_priv->lock); + + /* Save advertised settings for workaround in next function. */ + ethtool_convert_link_mode_to_legacy_u32(&priv->advertising, + cmd->link_modes.advertising); + + return 0; +} + +/** + * netdev_set_link_ksettings - set network device settings + * @dev: Network device. + * @cmd: Ethtool command. + * + * This function sets the PHY according to the ethtool command. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_port *port = &priv->port; + struct ethtool_link_ksettings copy_cmd; + u32 speed = cmd->base.speed; + u32 advertising; + int rc; + + ethtool_convert_link_mode_to_legacy_u32(&advertising, + cmd->link_modes.advertising); + + /* + * ethtool utility does not change advertised setting if auto + * negotiation is not specified explicitly. + */ + if (cmd->base.autoneg && priv->advertising == advertising) { + advertising |= ADVERTISED_ALL; + if (10 == speed) + advertising &= + ~(ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half); + else if (100 == speed) + advertising &= + ~(ADVERTISED_10baseT_Full | + ADVERTISED_10baseT_Half); + if (0 == cmd->base.duplex) + advertising &= + ~(ADVERTISED_100baseT_Full | + ADVERTISED_10baseT_Full); + else if (1 == cmd->base.duplex) + advertising &= + ~(ADVERTISED_100baseT_Half | + ADVERTISED_10baseT_Half); + } + mutex_lock(&hw_priv->lock); + if (cmd->base.autoneg && + (advertising & ADVERTISED_ALL) == ADVERTISED_ALL) { + port->duplex = 0; + port->speed = 0; + port->force_link = 0; + } else { + port->duplex = cmd->base.duplex + 1; + if (1000 != speed) + port->speed = speed; + if (cmd->base.autoneg) + port->force_link = 0; + else + port->force_link = 1; + } + + memcpy(©_cmd, cmd, sizeof(copy_cmd)); + ethtool_convert_legacy_u32_to_link_mode(copy_cmd.link_modes.advertising, + advertising); + rc = mii_ethtool_set_link_ksettings( + &priv->mii_if, + (const struct ethtool_link_ksettings *)©_cmd); + mutex_unlock(&hw_priv->lock); + return rc; +} + +/** + * netdev_nway_reset - restart auto-negotiation + * @dev: Network device. + * + * This function restarts the PHY for auto-negotiation. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_nway_reset(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + int rc; + + mutex_lock(&hw_priv->lock); + rc = mii_nway_restart(&priv->mii_if); + mutex_unlock(&hw_priv->lock); + return rc; +} + +/** + * netdev_get_link - get network device link status + * @dev: Network device. + * + * This function gets the link status from the PHY. + * + * Return true if PHY is linked and false otherwise. + */ +static u32 netdev_get_link(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + int rc; + + rc = mii_link_ok(&priv->mii_if); + return rc; +} + +/** + * netdev_get_drvinfo - get network driver information + * @dev: Network device. + * @info: Ethtool driver info data structure. + * + * This procedure returns the driver information. + */ +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(hw_priv->pdev), + sizeof(info->bus_info)); +} + +static struct hw_regs { + int start; + int end; +} hw_regs_range[] = { + { KS_DMA_TX_CTRL, KS884X_INTERRUPTS_STATUS }, + { KS_ADD_ADDR_0_LO, KS_ADD_ADDR_F_HI }, + { KS884X_ADDR_0_OFFSET, KS8841_WOL_FRAME_BYTE2_OFFSET }, + { KS884X_SIDER_P, KS8842_SGCR7_P }, + { KS8842_MACAR1_P, KS8842_TOSR8_P }, + { KS884X_P1MBCR_P, KS8842_P3ERCR_P }, + { 0, 0 } +}; + +/** + * netdev_get_regs_len - get length of register dump + * @dev: Network device. + * + * This function returns the length of the register dump. + * + * Return length of the register dump. + */ +static int netdev_get_regs_len(struct net_device *dev) +{ + struct hw_regs *range = hw_regs_range; + int regs_len = 0x10 * sizeof(u32); + + while (range->end > range->start) { + regs_len += (range->end - range->start + 3) / 4 * 4; + range++; + } + return regs_len; +} + +/** + * netdev_get_regs - get register dump + * @dev: Network device. + * @regs: Ethtool registers data structure. + * @ptr: Buffer to store the register values. + * + * This procedure dumps the register values in the provided buffer. + */ +static void netdev_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *ptr) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + int *buf = (int *) ptr; + struct hw_regs *range = hw_regs_range; + int len; + + mutex_lock(&hw_priv->lock); + regs->version = 0; + for (len = 0; len < 0x40; len += 4) { + pci_read_config_dword(hw_priv->pdev, len, buf); + buf++; + } + while (range->end > range->start) { + for (len = range->start; len < range->end; len += 4) { + *buf = readl(hw->io + len); + buf++; + } + range++; + } + mutex_unlock(&hw_priv->lock); +} + +#define WOL_SUPPORT \ + (WAKE_PHY | WAKE_MAGIC | \ + WAKE_UCAST | WAKE_MCAST | \ + WAKE_BCAST | WAKE_ARP) + +/** + * netdev_get_wol - get Wake-on-LAN support + * @dev: Network device. + * @wol: Ethtool Wake-on-LAN data structure. + * + * This procedure returns Wake-on-LAN support. + */ +static void netdev_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + + wol->supported = hw_priv->wol_support; + wol->wolopts = hw_priv->wol_enable; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +/** + * netdev_set_wol - set Wake-on-LAN support + * @dev: Network device. + * @wol: Ethtool Wake-on-LAN data structure. + * + * This function sets Wake-on-LAN support. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_set_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + + /* Need to find a way to retrieve the device IP address. */ + static const u8 net_addr[] = { 192, 168, 1, 1 }; + + if (wol->wolopts & ~hw_priv->wol_support) + return -EINVAL; + + hw_priv->wol_enable = wol->wolopts; + + /* Link wakeup cannot really be disabled. */ + if (wol->wolopts) + hw_priv->wol_enable |= WAKE_PHY; + hw_enable_wol(&hw_priv->hw, hw_priv->wol_enable, net_addr); + return 0; +} + +/** + * netdev_get_msglevel - get debug message level + * @dev: Network device. + * + * This function returns current debug message level. + * + * Return current debug message flags. + */ +static u32 netdev_get_msglevel(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + + return priv->msg_enable; +} + +/** + * netdev_set_msglevel - set debug message level + * @dev: Network device. + * @value: Debug message flags. + * + * This procedure sets debug message level. + */ +static void netdev_set_msglevel(struct net_device *dev, u32 value) +{ + struct dev_priv *priv = netdev_priv(dev); + + priv->msg_enable = value; +} + +/** + * netdev_get_eeprom_len - get EEPROM length + * @dev: Network device. + * + * This function returns the length of the EEPROM. + * + * Return length of the EEPROM. + */ +static int netdev_get_eeprom_len(struct net_device *dev) +{ + return EEPROM_SIZE * 2; +} + +#define EEPROM_MAGIC 0x10A18842 + +/** + * netdev_get_eeprom - get EEPROM data + * @dev: Network device. + * @eeprom: Ethtool EEPROM data structure. + * @data: Buffer to store the EEPROM data. + * + * This function dumps the EEPROM data in the provided buffer. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + u8 *eeprom_byte = (u8 *) eeprom_data; + int i; + int len; + + len = (eeprom->offset + eeprom->len + 1) / 2; + for (i = eeprom->offset / 2; i < len; i++) + eeprom_data[i] = eeprom_read(&hw_priv->hw, i); + eeprom->magic = EEPROM_MAGIC; + memcpy(data, &eeprom_byte[eeprom->offset], eeprom->len); + + return 0; +} + +/** + * netdev_set_eeprom - write EEPROM data + * @dev: Network device. + * @eeprom: Ethtool EEPROM data structure. + * @data: Data buffer. + * + * This function modifies the EEPROM data one byte at a time. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + u16 eeprom_word[EEPROM_SIZE]; + u8 *eeprom_byte = (u8 *) eeprom_word; + int i; + int len; + + if (eeprom->magic != EEPROM_MAGIC) + return -EINVAL; + + len = (eeprom->offset + eeprom->len + 1) / 2; + for (i = eeprom->offset / 2; i < len; i++) + eeprom_data[i] = eeprom_read(&hw_priv->hw, i); + memcpy(eeprom_word, eeprom_data, EEPROM_SIZE * 2); + memcpy(&eeprom_byte[eeprom->offset], data, eeprom->len); + for (i = 0; i < EEPROM_SIZE; i++) + if (eeprom_word[i] != eeprom_data[i]) { + eeprom_data[i] = eeprom_word[i]; + eeprom_write(&hw_priv->hw, i, eeprom_data[i]); + } + + return 0; +} + +/** + * netdev_get_pauseparam - get flow control parameters + * @dev: Network device. + * @pause: Ethtool PAUSE settings data structure. + * + * This procedure returns the PAUSE control flow settings. + */ +static void netdev_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + pause->autoneg = (hw->overrides & PAUSE_FLOW_CTRL) ? 0 : 1; + if (!hw->ksz_switch) { + pause->rx_pause = + (hw->rx_cfg & DMA_RX_FLOW_ENABLE) ? 1 : 0; + pause->tx_pause = + (hw->tx_cfg & DMA_TX_FLOW_ENABLE) ? 1 : 0; + } else { + pause->rx_pause = + (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_RX_FLOW_CTRL)) ? 1 : 0; + pause->tx_pause = + (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_TX_FLOW_CTRL)) ? 1 : 0; + } +} + +/** + * netdev_set_pauseparam - set flow control parameters + * @dev: Network device. + * @pause: Ethtool PAUSE settings data structure. + * + * This function sets the PAUSE control flow settings. + * Not implemented yet. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port *port = &priv->port; + + mutex_lock(&hw_priv->lock); + if (pause->autoneg) { + if (!pause->rx_pause && !pause->tx_pause) + port->flow_ctrl = PHY_NO_FLOW_CTRL; + else + port->flow_ctrl = PHY_FLOW_CTRL; + hw->overrides &= ~PAUSE_FLOW_CTRL; + port->force_link = 0; + if (hw->ksz_switch) { + sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_RX_FLOW_CTRL, 1); + sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_TX_FLOW_CTRL, 1); + } + port_set_link_speed(port); + } else { + hw->overrides |= PAUSE_FLOW_CTRL; + if (hw->ksz_switch) { + sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_RX_FLOW_CTRL, pause->rx_pause); + sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, + SWITCH_TX_FLOW_CTRL, pause->tx_pause); + } else + set_flow_ctrl(hw, pause->rx_pause, pause->tx_pause); + } + mutex_unlock(&hw_priv->lock); + + return 0; +} + +/** + * netdev_get_ringparam - get tx/rx ring parameters + * @dev: Network device. + * @ring: Ethtool RING settings data structure. + * + * This procedure returns the TX/RX ring settings. + */ +static void netdev_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ring) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + ring->tx_max_pending = (1 << 9); + ring->tx_pending = hw->tx_desc_info.alloc; + ring->rx_max_pending = (1 << 9); + ring->rx_pending = hw->rx_desc_info.alloc; +} + +#define STATS_LEN (TOTAL_PORT_COUNTER_NUM) + +static struct { + char string[ETH_GSTRING_LEN]; +} ethtool_stats_keys[STATS_LEN] = { + { "rx_lo_priority_octets" }, + { "rx_hi_priority_octets" }, + { "rx_undersize_packets" }, + { "rx_fragments" }, + { "rx_oversize_packets" }, + { "rx_jabbers" }, + { "rx_symbol_errors" }, + { "rx_crc_errors" }, + { "rx_align_errors" }, + { "rx_mac_ctrl_packets" }, + { "rx_pause_packets" }, + { "rx_bcast_packets" }, + { "rx_mcast_packets" }, + { "rx_ucast_packets" }, + { "rx_64_or_less_octet_packets" }, + { "rx_65_to_127_octet_packets" }, + { "rx_128_to_255_octet_packets" }, + { "rx_256_to_511_octet_packets" }, + { "rx_512_to_1023_octet_packets" }, + { "rx_1024_to_1522_octet_packets" }, + + { "tx_lo_priority_octets" }, + { "tx_hi_priority_octets" }, + { "tx_late_collisions" }, + { "tx_pause_packets" }, + { "tx_bcast_packets" }, + { "tx_mcast_packets" }, + { "tx_ucast_packets" }, + { "tx_deferred" }, + { "tx_total_collisions" }, + { "tx_excessive_collisions" }, + { "tx_single_collisions" }, + { "tx_mult_collisions" }, + + { "rx_discards" }, + { "tx_discards" }, +}; + +/** + * netdev_get_strings - get statistics identity strings + * @dev: Network device. + * @stringset: String set identifier. + * @buf: Buffer to store the strings. + * + * This procedure returns the strings used to identify the statistics. + */ +static void netdev_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + if (ETH_SS_STATS == stringset) + memcpy(buf, ðtool_stats_keys, + ETH_GSTRING_LEN * hw->mib_cnt); +} + +/** + * netdev_get_sset_count - get statistics size + * @dev: Network device. + * @sset: The statistics set number. + * + * This function returns the size of the statistics to be reported. + * + * Return size of the statistics to be reported. + */ +static int netdev_get_sset_count(struct net_device *dev, int sset) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + switch (sset) { + case ETH_SS_STATS: + return hw->mib_cnt; + default: + return -EOPNOTSUPP; + } +} + +/** + * netdev_get_ethtool_stats - get network device statistics + * @dev: Network device. + * @stats: Ethtool statistics data structure. + * @data: Buffer to store the statistics. + * + * This procedure returns the statistics. + */ +static void netdev_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port *port = &priv->port; + int n_stats = stats->n_stats; + int i; + int n; + int p; + u64 counter[TOTAL_PORT_COUNTER_NUM]; + + mutex_lock(&hw_priv->lock); + n = SWITCH_PORT_NUM; + for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) { + if (media_connected == hw->port_mib[p].state) { + hw_priv->counter[p].read = 1; + + /* Remember first port that requests read. */ + if (n == SWITCH_PORT_NUM) + n = p; + } + } + mutex_unlock(&hw_priv->lock); + + if (n < SWITCH_PORT_NUM) + schedule_work(&hw_priv->mib_read); + + if (1 == port->mib_port_cnt && n < SWITCH_PORT_NUM) { + p = n; + wait_event_interruptible_timeout( + hw_priv->counter[p].counter, + 2 == hw_priv->counter[p].read, + HZ * 1); + } else + for (i = 0, p = n; i < port->mib_port_cnt - n; i++, p++) { + if (0 == i) { + wait_event_interruptible_timeout( + hw_priv->counter[p].counter, + 2 == hw_priv->counter[p].read, + HZ * 2); + } else if (hw->port_mib[p].cnt_ptr) { + wait_event_interruptible_timeout( + hw_priv->counter[p].counter, + 2 == hw_priv->counter[p].read, + HZ * 1); + } + } + + get_mib_counters(hw, port->first_port, port->mib_port_cnt, counter); + n = hw->mib_cnt; + if (n > n_stats) + n = n_stats; + n_stats -= n; + for (i = 0; i < n; i++) + *data++ = counter[i]; +} + +/** + * netdev_set_features - set receive checksum support + * @dev: Network device. + * @features: New device features (offloads). + * + * This function sets receive checksum support setting. + * + * Return 0 if successful; otherwise an error code. + */ +static int netdev_set_features(struct net_device *dev, + netdev_features_t features) +{ + struct dev_priv *priv = netdev_priv(dev); + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + + mutex_lock(&hw_priv->lock); + + /* see note in hw_setup() */ + if (features & NETIF_F_RXCSUM) + hw->rx_cfg |= DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP; + else + hw->rx_cfg &= ~(DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP); + + if (hw->enabled) + writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL); + + mutex_unlock(&hw_priv->lock); + + return 0; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .nway_reset = netdev_nway_reset, + .get_link = netdev_get_link, + .get_drvinfo = netdev_get_drvinfo, + .get_regs_len = netdev_get_regs_len, + .get_regs = netdev_get_regs, + .get_wol = netdev_get_wol, + .set_wol = netdev_set_wol, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, + .get_eeprom_len = netdev_get_eeprom_len, + .get_eeprom = netdev_get_eeprom, + .set_eeprom = netdev_set_eeprom, + .get_pauseparam = netdev_get_pauseparam, + .set_pauseparam = netdev_set_pauseparam, + .get_ringparam = netdev_get_ringparam, + .get_strings = netdev_get_strings, + .get_sset_count = netdev_get_sset_count, + .get_ethtool_stats = netdev_get_ethtool_stats, + .get_link_ksettings = netdev_get_link_ksettings, + .set_link_ksettings = netdev_set_link_ksettings, +}; + +/* + * Hardware monitoring + */ + +static void update_link(struct net_device *dev, struct dev_priv *priv, + struct ksz_port *port) +{ + if (priv->media_state != port->linked->state) { + priv->media_state = port->linked->state; + if (netif_running(dev)) + set_media_state(dev, media_connected); + } +} + +static void mib_read_work(struct work_struct *work) +{ + struct dev_info *hw_priv = + container_of(work, struct dev_info, mib_read); + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port_mib *mib; + int i; + + next_jiffies = jiffies; + for (i = 0; i < hw->mib_port_cnt; i++) { + mib = &hw->port_mib[i]; + + /* Reading MIB counters or requested to read. */ + if (mib->cnt_ptr || 1 == hw_priv->counter[i].read) { + + /* Need to process receive interrupt. */ + if (port_r_cnt(hw, i)) + break; + hw_priv->counter[i].read = 0; + + /* Finish reading counters. */ + if (0 == mib->cnt_ptr) { + hw_priv->counter[i].read = 2; + wake_up_interruptible( + &hw_priv->counter[i].counter); + } + } else if (time_after_eq(jiffies, hw_priv->counter[i].time)) { + /* Only read MIB counters when the port is connected. */ + if (media_connected == mib->state) + hw_priv->counter[i].read = 1; + next_jiffies += HZ * 1 * hw->mib_port_cnt; + hw_priv->counter[i].time = next_jiffies; + + /* Port is just disconnected. */ + } else if (mib->link_down) { + mib->link_down = 0; + + /* Read counters one last time after link is lost. */ + hw_priv->counter[i].read = 1; + } + } +} + +static void mib_monitor(struct timer_list *t) +{ + struct dev_info *hw_priv = from_timer(hw_priv, t, mib_timer_info.timer); + + mib_read_work(&hw_priv->mib_read); + + /* This is used to verify Wake-on-LAN is working. */ + if (hw_priv->pme_wait) { + if (time_is_before_eq_jiffies(hw_priv->pme_wait)) { + hw_clr_wol_pme_status(&hw_priv->hw); + hw_priv->pme_wait = 0; + } + } else if (hw_chk_wol_pme_status(&hw_priv->hw)) { + + /* PME is asserted. Wait 2 seconds to clear it. */ + hw_priv->pme_wait = jiffies + HZ * 2; + } + + ksz_update_timer(&hw_priv->mib_timer_info); +} + +/** + * dev_monitor - periodic monitoring + * @t: timer list containing a network device pointer. + * + * This routine is run in a kernel timer to monitor the network device. + */ +static void dev_monitor(struct timer_list *t) +{ + struct dev_priv *priv = from_timer(priv, t, monitor_timer_info.timer); + struct net_device *dev = priv->mii_if.dev; + struct dev_info *hw_priv = priv->adapter; + struct ksz_hw *hw = &hw_priv->hw; + struct ksz_port *port = &priv->port; + + if (!(hw->features & LINK_INT_WORKING)) + port_get_link_speed(port); + update_link(dev, priv, port); + + ksz_update_timer(&priv->monitor_timer_info); +} + +/* + * Linux network device interface functions + */ + +/* Driver exported variables */ + +static int msg_enable; + +static char *macaddr = ":"; +static char *mac1addr = ":"; + +/* + * This enables multiple network device mode for KSZ8842, which contains a + * switch with two physical ports. Some users like to take control of the + * ports for running Spanning Tree Protocol. The driver will create an + * additional eth? device for the other port. + * + * Some limitations are the network devices cannot have different MTU and + * multicast hash tables. + */ +static int multi_dev; + +/* + * As most users select multiple network device mode to use Spanning Tree + * Protocol, this enables a feature in which most unicast and multicast packets + * are forwarded inside the switch and not passed to the host. Only packets + * that need the host's attention are passed to it. This prevents the host + * wasting CPU time to examine each and every incoming packets and do the + * forwarding itself. + * + * As the hack requires the private bridge header, the driver cannot compile + * with just the kernel headers. + * + * Enabling STP support also turns on multiple network device mode. + */ +static int stp; + +/* + * This enables fast aging in the KSZ8842 switch. Not sure what situation + * needs that. However, fast aging is used to flush the dynamic MAC table when + * STP support is enabled. + */ +static int fast_aging; + +/** + * netdev_init - initialize network device. + * @dev: Network device. + * + * This function initializes the network device. + * + * Return 0 if successful; otherwise an error code indicating failure. + */ +static int __init netdev_init(struct net_device *dev) +{ + struct dev_priv *priv = netdev_priv(dev); + + /* 500 ms timeout */ + ksz_init_timer(&priv->monitor_timer_info, 500 * HZ / 1000, + dev_monitor); + + /* 500 ms timeout */ + dev->watchdog_timeo = HZ / 2; + + dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_RXCSUM; + + /* + * Hardware does not really support IPv6 checksum generation, but + * driver actually runs faster with this on. + */ + dev->hw_features |= NETIF_F_IPV6_CSUM; + + dev->features |= dev->hw_features; + + sema_init(&priv->proc_sem, 1); + + priv->mii_if.phy_id_mask = 0x1; + priv->mii_if.reg_num_mask = 0x7; + priv->mii_if.dev = dev; + priv->mii_if.mdio_read = mdio_read; + priv->mii_if.mdio_write = mdio_write; + priv->mii_if.phy_id = priv->port.first_port + 1; + + priv->msg_enable = netif_msg_init(msg_enable, + (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)); + + return 0; +} + +static const struct net_device_ops netdev_ops = { + .ndo_init = netdev_init, + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_get_stats = netdev_query_statistics, + .ndo_start_xmit = netdev_tx, + .ndo_tx_timeout = netdev_tx_timeout, + .ndo_change_mtu = netdev_change_mtu, + .ndo_set_features = netdev_set_features, + .ndo_set_mac_address = netdev_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = netdev_ioctl, + .ndo_set_rx_mode = netdev_set_rx_mode, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = netdev_netpoll, +#endif +}; + +static void netdev_free(struct net_device *dev) +{ + if (dev->watchdog_timeo) + unregister_netdev(dev); + + free_netdev(dev); +} + +struct platform_info { + struct dev_info dev_info; + struct net_device *netdev[SWITCH_PORT_NUM]; +}; + +static int net_device_present; + +static void get_mac_addr(struct dev_info *hw_priv, u8 *macaddr, int port) +{ + int i; + int j; + int got_num; + int num; + + i = j = num = got_num = 0; + while (j < ETH_ALEN) { + if (macaddr[i]) { + int digit; + + got_num = 1; + digit = hex_to_bin(macaddr[i]); + if (digit >= 0) + num = num * 16 + digit; + else if (':' == macaddr[i]) + got_num = 2; + else + break; + } else if (got_num) + got_num = 2; + else + break; + if (2 == got_num) { + if (MAIN_PORT == port) { + hw_priv->hw.override_addr[j++] = (u8) num; + hw_priv->hw.override_addr[5] += + hw_priv->hw.id; + } else { + hw_priv->hw.ksz_switch->other_addr[j++] = + (u8) num; + hw_priv->hw.ksz_switch->other_addr[5] += + hw_priv->hw.id; + } + num = got_num = 0; + } + i++; + } + if (ETH_ALEN == j) { + if (MAIN_PORT == port) + hw_priv->hw.mac_override = 1; + } +} + +#define KS884X_DMA_MASK (~0x0UL) + +static void read_other_addr(struct ksz_hw *hw) +{ + int i; + u16 data[3]; + struct ksz_switch *sw = hw->ksz_switch; + + for (i = 0; i < 3; i++) + data[i] = eeprom_read(hw, i + EEPROM_DATA_OTHER_MAC_ADDR); + if ((data[0] || data[1] || data[2]) && data[0] != 0xffff) { + sw->other_addr[5] = (u8) data[0]; + sw->other_addr[4] = (u8)(data[0] >> 8); + sw->other_addr[3] = (u8) data[1]; + sw->other_addr[2] = (u8)(data[1] >> 8); + sw->other_addr[1] = (u8) data[2]; + sw->other_addr[0] = (u8)(data[2] >> 8); + } +} + +#ifndef PCI_VENDOR_ID_MICREL_KS +#define PCI_VENDOR_ID_MICREL_KS 0x16c6 +#endif + +static int pcidev_init(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *dev; + struct dev_priv *priv; + struct dev_info *hw_priv; + struct ksz_hw *hw; + struct platform_info *info; + struct ksz_port *port; + unsigned long reg_base; + unsigned long reg_len; + int cnt; + int i; + int mib_port_count; + int pi; + int port_count; + int result; + char banner[sizeof(version)]; + struct ksz_switch *sw = NULL; + + result = pcim_enable_device(pdev); + if (result) + return result; + + result = -ENODEV; + + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) + return result; + + reg_base = pci_resource_start(pdev, 0); + reg_len = pci_resource_len(pdev, 0); + if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0) + return result; + + if (!request_mem_region(reg_base, reg_len, DRV_NAME)) + return result; + pci_set_master(pdev); + + result = -ENOMEM; + + info = kzalloc(sizeof(struct platform_info), GFP_KERNEL); + if (!info) + goto pcidev_init_dev_err; + + hw_priv = &info->dev_info; + hw_priv->pdev = pdev; + + hw = &hw_priv->hw; + + hw->io = ioremap(reg_base, reg_len); + if (!hw->io) + goto pcidev_init_io_err; + + cnt = hw_init(hw); + if (!cnt) { + if (msg_enable & NETIF_MSG_PROBE) + pr_alert("chip not detected\n"); + result = -ENODEV; + goto pcidev_init_alloc_err; + } + + snprintf(banner, sizeof(banner), "%s", version); + banner[13] = cnt + '0'; /* Replace x in "Micrel KSZ884x" */ + dev_info(&hw_priv->pdev->dev, "%s\n", banner); + dev_dbg(&hw_priv->pdev->dev, "Mem = %p; IRQ = %d\n", hw->io, pdev->irq); + + /* Assume device is KSZ8841. */ + hw->dev_count = 1; + port_count = 1; + mib_port_count = 1; + hw->addr_list_size = 0; + hw->mib_cnt = PORT_COUNTER_NUM; + hw->mib_port_cnt = 1; + + /* KSZ8842 has a switch with multiple ports. */ + if (2 == cnt) { + if (fast_aging) + hw->overrides |= FAST_AGING; + + hw->mib_cnt = TOTAL_PORT_COUNTER_NUM; + + /* Multiple network device interfaces are required. */ + if (multi_dev) { + hw->dev_count = SWITCH_PORT_NUM; + hw->addr_list_size = SWITCH_PORT_NUM - 1; + } + + /* Single network device has multiple ports. */ + if (1 == hw->dev_count) { + port_count = SWITCH_PORT_NUM; + mib_port_count = SWITCH_PORT_NUM; + } + hw->mib_port_cnt = TOTAL_PORT_NUM; + hw->ksz_switch = kzalloc(sizeof(struct ksz_switch), GFP_KERNEL); + if (!hw->ksz_switch) + goto pcidev_init_alloc_err; + + sw = hw->ksz_switch; + } + for (i = 0; i < hw->mib_port_cnt; i++) + hw->port_mib[i].mib_start = 0; + + hw->parent = hw_priv; + + /* Default MTU is 1500. */ + hw_priv->mtu = (REGULAR_RX_BUF_SIZE + 3) & ~3; + + if (ksz_alloc_mem(hw_priv)) + goto pcidev_init_mem_err; + + hw_priv->hw.id = net_device_present; + + spin_lock_init(&hw_priv->hwlock); + mutex_init(&hw_priv->lock); + + for (i = 0; i < TOTAL_PORT_NUM; i++) + init_waitqueue_head(&hw_priv->counter[i].counter); + + if (macaddr[0] != ':') + get_mac_addr(hw_priv, macaddr, MAIN_PORT); + + /* Read MAC address and initialize override address if not overridden. */ + hw_read_addr(hw); + + /* Multiple device interfaces mode requires a second MAC address. */ + if (hw->dev_count > 1) { + memcpy(sw->other_addr, hw->override_addr, ETH_ALEN); + read_other_addr(hw); + if (mac1addr[0] != ':') + get_mac_addr(hw_priv, mac1addr, OTHER_PORT); + } + + hw_setup(hw); + if (hw->ksz_switch) + sw_setup(hw); + else { + hw_priv->wol_support = WOL_SUPPORT; + hw_priv->wol_enable = 0; + } + + INIT_WORK(&hw_priv->mib_read, mib_read_work); + + /* 500 ms timeout */ + ksz_init_timer(&hw_priv->mib_timer_info, 500 * HZ / 1000, + mib_monitor); + + for (i = 0; i < hw->dev_count; i++) { + dev = alloc_etherdev(sizeof(struct dev_priv)); + if (!dev) + goto pcidev_init_reg_err; + SET_NETDEV_DEV(dev, &pdev->dev); + info->netdev[i] = dev; + + priv = netdev_priv(dev); + priv->adapter = hw_priv; + priv->id = net_device_present++; + + port = &priv->port; + port->port_cnt = port_count; + port->mib_port_cnt = mib_port_count; + port->first_port = i; + port->flow_ctrl = PHY_FLOW_CTRL; + + port->hw = hw; + port->linked = &hw->port_info[port->first_port]; + + for (cnt = 0, pi = i; cnt < port_count; cnt++, pi++) { + hw->port_info[pi].port_id = pi; + hw->port_info[pi].pdev = dev; + hw->port_info[pi].state = media_disconnected; + } + + dev->mem_start = (unsigned long) hw->io; + dev->mem_end = dev->mem_start + reg_len - 1; + dev->irq = pdev->irq; + if (MAIN_PORT == i) + memcpy(dev->dev_addr, hw_priv->hw.override_addr, + ETH_ALEN); + else { + memcpy(dev->dev_addr, sw->other_addr, ETH_ALEN); + if (ether_addr_equal(sw->other_addr, hw->override_addr)) + dev->dev_addr[5] += port->first_port; + } + + dev->netdev_ops = &netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops; + + /* MTU range: 60 - 1894 */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = MAX_RX_BUF_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + + if (register_netdev(dev)) + goto pcidev_init_reg_err; + port_set_power_saving(port, true); + } + + pci_dev_get(hw_priv->pdev); + pci_set_drvdata(pdev, info); + return 0; + +pcidev_init_reg_err: + for (i = 0; i < hw->dev_count; i++) { + if (info->netdev[i]) { + netdev_free(info->netdev[i]); + info->netdev[i] = NULL; + } + } + +pcidev_init_mem_err: + ksz_free_mem(hw_priv); + kfree(hw->ksz_switch); + +pcidev_init_alloc_err: + iounmap(hw->io); + +pcidev_init_io_err: + kfree(info); + +pcidev_init_dev_err: + release_mem_region(reg_base, reg_len); + + return result; +} + +static void pcidev_exit(struct pci_dev *pdev) +{ + int i; + struct platform_info *info = pci_get_drvdata(pdev); + struct dev_info *hw_priv = &info->dev_info; + + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + for (i = 0; i < hw_priv->hw.dev_count; i++) { + if (info->netdev[i]) + netdev_free(info->netdev[i]); + } + if (hw_priv->hw.io) + iounmap(hw_priv->hw.io); + ksz_free_mem(hw_priv); + kfree(hw_priv->hw.ksz_switch); + pci_dev_put(hw_priv->pdev); + kfree(info); +} + +static int __maybe_unused pcidev_resume(struct device *dev_d) +{ + int i; + struct platform_info *info = dev_get_drvdata(dev_d); + struct dev_info *hw_priv = &info->dev_info; + struct ksz_hw *hw = &hw_priv->hw; + + device_wakeup_disable(dev_d); + + if (hw_priv->wol_enable) + hw_cfg_wol_pme(hw, 0); + for (i = 0; i < hw->dev_count; i++) { + if (info->netdev[i]) { + struct net_device *dev = info->netdev[i]; + + if (netif_running(dev)) { + netdev_open(dev); + netif_device_attach(dev); + } + } + } + return 0; +} + +static int __maybe_unused pcidev_suspend(struct device *dev_d) +{ + int i; + struct platform_info *info = dev_get_drvdata(dev_d); + struct dev_info *hw_priv = &info->dev_info; + struct ksz_hw *hw = &hw_priv->hw; + + /* Need to find a way to retrieve the device IP address. */ + static const u8 net_addr[] = { 192, 168, 1, 1 }; + + for (i = 0; i < hw->dev_count; i++) { + if (info->netdev[i]) { + struct net_device *dev = info->netdev[i]; + + if (netif_running(dev)) { + netif_device_detach(dev); + netdev_close(dev); + } + } + } + if (hw_priv->wol_enable) { + hw_enable_wol(hw, hw_priv->wol_enable, net_addr); + hw_cfg_wol_pme(hw, 1); + } + + device_wakeup_enable(dev_d); + return 0; +} + +static char pcidev_name[] = "ksz884xp"; + +static const struct pci_device_id pcidev_table[] = { + { PCI_VENDOR_ID_MICREL_KS, 0x8841, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_MICREL_KS, 0x8842, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, pcidev_table); + +static SIMPLE_DEV_PM_OPS(pcidev_pm_ops, pcidev_suspend, pcidev_resume); + +static struct pci_driver pci_device_driver = { + .driver.pm = &pcidev_pm_ops, + .name = pcidev_name, + .id_table = pcidev_table, + .probe = pcidev_init, + .remove = pcidev_exit +}; + +module_pci_driver(pci_device_driver); + +MODULE_DESCRIPTION("KSZ8841/2 PCI network driver"); +MODULE_AUTHOR("Tristram Ha <Tristram.Ha@micrel.com>"); +MODULE_LICENSE("GPL"); + +module_param_named(message, msg_enable, int, 0); +MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)"); + +module_param(macaddr, charp, 0); +module_param(mac1addr, charp, 0); +module_param(fast_aging, int, 0); +module_param(multi_dev, int, 0); +module_param(stp, int, 0); +MODULE_PARM_DESC(macaddr, "MAC address"); +MODULE_PARM_DESC(mac1addr, "Second MAC address"); +MODULE_PARM_DESC(fast_aging, "Fast aging"); +MODULE_PARM_DESC(multi_dev, "Multiple device interfaces"); +MODULE_PARM_DESC(stp, "STP support"); |