diff options
Diffstat (limited to 'drivers/net/ethernet/natsemi')
| -rw-r--r-- | drivers/net/ethernet/natsemi/Kconfig | 65 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/Makefile | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/jazzsonic.c | 252 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/macsonic.c | 646 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/natsemi.c | 3383 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/ns83820.c | 2263 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/sonic.c | 855 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/sonic.h | 473 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/xtsonic.c | 274 |
9 files changed, 8221 insertions, 0 deletions
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig new file mode 100644 index 000000000..0a92101aa --- /dev/null +++ b/drivers/net/ethernet/natsemi/Kconfig @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# National Semiconductor device configuration +# + +config NET_VENDOR_NATSEMI + bool "National Semiconductor devices" + default y + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about National Semiconductor devices. If you say Y, + you will be asked for your specific card in the following questions. + +if NET_VENDOR_NATSEMI + +config MACSONIC + tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" + depends on MAC + help + Support for NatSemi SONIC based Ethernet devices. This includes + the onboard Ethernet in many Quadras as well as some LC-PDS, + a few Nubus and all known Comm Slot Ethernet cards. If you have + one of these say Y here. + + To compile this driver as a module, choose M here. This module will + be called macsonic. + +config MIPS_JAZZ_SONIC + tristate "MIPS JAZZ onboard SONIC Ethernet support" + depends on MACH_JAZZ + help + This is the driver for the onboard card of MIPS Magnum 4000, + Acer PICA, Olivetti M700-10 and a few other identical OEM systems. + +config NATSEMI + tristate "National Semiconductor DP8381x series PCI Ethernet support" + depends on PCI + select CRC32 + help + This driver is for the National Semiconductor DP83810 series, + which is used in cards from PureData, NetGear, Linksys + and others, including the 83815 chip. + More specific information and updates are available from + <http://www.scyld.com/network/natsemi.html>. + +config NS83820 + tristate "National Semiconductor DP83820 support" + depends on PCI + help + This is a driver for the National Semiconductor DP83820 series + of gigabit ethernet MACs. Cards using this chipset include + the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, + SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of + zero copy. + +config XTENSA_XT2000_SONIC + tristate "Xtensa XT2000 onboard SONIC Ethernet support" + depends on XTENSA_PLATFORM_XT2000 + help + This is the driver for the onboard card of the Xtensa XT2000 board. + +endif # NET_VENDOR_NATSEMI diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile new file mode 100644 index 000000000..a759aa09e --- /dev/null +++ b/drivers/net/ethernet/natsemi/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the National Semiconductor Sonic devices. +# + +obj-$(CONFIG_MACSONIC) += macsonic.o +obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o +obj-$(CONFIG_NATSEMI) += natsemi.o +obj-$(CONFIG_NS83820) += ns83820.o +obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c new file mode 100644 index 000000000..ce3eca5d1 --- /dev/null +++ b/drivers/net/ethernet/natsemi/jazzsonic.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * jazzsonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, and (from the mac68k project) introduced + * dhd's support for 16-bit cards. + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on Mips Jazz + * systems (Acer Pica-61, Mips Magnum 4000, Olivetti M700 and + * perhaps others, too) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/gfp.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/pgtable.h> + +#include <asm/bootinfo.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/jazz.h> +#include <asm/jazzdma.h> + +static char jazz_sonic_string[] = "jazzsonic"; + +#define SONIC_MEM_SIZE 0x100 + +#include "sonic.h" + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ +do { \ + *((volatile unsigned int *)dev->base_addr+(reg)) = (val); \ +} while (0) + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x04, /* Mips Magnum 4000 */ + 0xffff /* end of list */ +}; + +static int jazzsonic_open(struct net_device* dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return retval; + } + + retval = sonic_open(dev); + if (retval) + free_irq(dev->irq, dev); + return retval; +} + +static int jazzsonic_close(struct net_device* dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static const struct net_device_ops sonic_netdev_ops = { + .ndo_open = jazzsonic_open, + .ndo_stop = jazzsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_rx_mode = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int sonic_probe1(struct net_device *dev) +{ + unsigned int silicon_revision; + unsigned int val; + struct sonic_local *lp = netdev_priv(dev); + int err = -ENODEV; + int i; + + if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + i = 0; + while (known_revisions[i] != 0xffff && + known_revisions[i] != silicon_revision) + i++; + + if (known_revisions[i] == 0xffff) { + pr_info("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + goto out; + } + + /* + * Put the sonic into software reset, then + * retrieve and print the ethernet address. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + for (i=0; i<3; i++) { + val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + lp->dma_bitmode = SONIC_BITMODE32; + + err = sonic_alloc_descriptors(dev); + if (err) + goto out; + + dev->netdev_ops = &sonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + +/* + * Probe for a SONIC ethernet controller on a Mips Jazz board. + * Actually probing is superfluous but we're paranoid. + */ +static int jazz_sonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *res; + int err = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct sonic_local)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); + + netdev_boot_setup_check(dev); + + dev->base_addr = res->start; + dev->irq = platform_get_irq(pdev, 0); + err = sonic_probe1(dev); + if (err) + goto out; + + pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", + dev->base_addr, dev->dev_addr, dev->irq); + + sonic_msg_init(dev); + + err = register_netdev(dev); + if (err) + goto undo_probe1; + + return 0; + +undo_probe1: + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Jazz SONIC ethernet driver"); +MODULE_ALIAS("platform:jazzsonic"); + +#include "sonic.c" + +static int jazz_sonic_device_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local* lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver jazz_sonic_driver = { + .probe = jazz_sonic_probe, + .remove = jazz_sonic_device_remove, + .driver = { + .name = jazz_sonic_string, + }, +}; + +module_platform_driver(jazz_sonic_driver); diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c new file mode 100644 index 000000000..2289e1fe3 --- /dev/null +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -0,0 +1,646 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * macsonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, converted to unified driver model, made it work as + * a module again, and from the mac68k project, introduced more 32-bit cards + * and dhd's support for 16-bit cards. + * + * (C) 1998 Alan Cox + * + * Debugging Andreas Ehliar, Michael Schmitz + * + * Based on code + * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the Mac onboard Sonic ethernet chip. + * + * 98/12/21 MSch: judged from tests on Q800, it's basically working, + * but eating up both receive and transmit resources + * and duplicating packets. Needs more testing. + * + * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed. + * + * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems + * on centris. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/gfp.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/nubus.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/bitrev.h> +#include <linux/slab.h> +#include <linux/pgtable.h> + +#include <asm/io.h> +#include <asm/hwtest.h> +#include <asm/dma.h> +#include <asm/macintosh.h> +#include <asm/macints.h> +#include <asm/mac_via.h> + +#include "sonic.h" + +/* These should basically be bus-size and endian independent (since + the SONIC is at least smart enough that it uses the same endianness + as the host, unlike certain less enlightened Macintosh NICs) */ +#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ + + lp->reg_offset)) +#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ + + lp->reg_offset)) + +/* For onboard SONIC */ +#define ONBOARD_SONIC_REGISTERS 0x50F0A000 +#define ONBOARD_SONIC_PROM_BASE 0x50f08000 + +enum macsonic_type { + MACSONIC_DUODOCK, + MACSONIC_APPLE, + MACSONIC_APPLE16, + MACSONIC_DAYNA, + MACSONIC_DAYNALINK +}; + +/* For the built-in SONIC in the Duo Dock */ +#define DUODOCK_SONIC_REGISTERS 0xe10000 +#define DUODOCK_SONIC_PROM_BASE 0xe12000 + +/* For Apple-style NuBus SONIC */ +#define APPLE_SONIC_REGISTERS 0 +#define APPLE_SONIC_PROM_BASE 0x40000 + +/* Daynalink LC SONIC */ +#define DAYNALINK_PROM_BASE 0x400000 + +/* For Dayna-style NuBus SONIC (haven't seen one yet) */ +#define DAYNA_SONIC_REGISTERS 0x180000 +/* This is what OpenBSD says. However, this is definitely in NuBus + ROM space so we should be able to get it by walking the NuBus + resource directories */ +#define DAYNA_SONIC_MAC_ADDR 0xffe004 + +#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) + +/* + * For reversing the PROM address + */ + +static inline void bit_reverse_addr(unsigned char addr[6]) +{ + int i; + + for(i = 0; i < 6; i++) + addr[i] = bitrev8(addr[i]); +} + +static int macsonic_open(struct net_device* dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + goto err; + } + /* Under the A/UX interrupt scheme, the onboard SONIC interrupt gets + * moved from level 2 to level 3. Unfortunately we still get some + * level 2 interrupts so register the handler for both. + */ + if (dev->irq == IRQ_AUTO_3) { + retval = request_irq(IRQ_NUBUS_9, sonic_interrupt, 0, + "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, IRQ_NUBUS_9); + goto err_irq; + } + } + retval = sonic_open(dev); + if (retval) + goto err_irq_nubus; + return 0; + +err_irq_nubus: + if (dev->irq == IRQ_AUTO_3) + free_irq(IRQ_NUBUS_9, dev); +err_irq: + free_irq(dev->irq, dev); +err: + return retval; +} + +static int macsonic_close(struct net_device* dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + if (dev->irq == IRQ_AUTO_3) + free_irq(IRQ_NUBUS_9, dev); + return err; +} + +static const struct net_device_ops macsonic_netdev_ops = { + .ndo_open = macsonic_open, + .ndo_stop = macsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_set_rx_mode = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_get_stats = sonic_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int macsonic_init(struct net_device *dev) +{ + struct sonic_local* lp = netdev_priv(dev); + int err = sonic_alloc_descriptors(dev); + + if (err) + return err; + + dev->netdev_ops = &macsonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT, 0xffff); + SONIC_WRITE(SONIC_FAET, 0xffff); + SONIC_WRITE(SONIC_MPT, 0xffff); + + return 0; +} + +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void mac_onboard_sonic_ethernet_addr(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + const int prom_addr = ONBOARD_SONIC_PROM_BASE; + unsigned short val; + + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ + bit_reverse_addr(dev->dev_addr); + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. + */ + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + eth_hw_addr_random(dev); +} + +static int mac_onboard_sonic_probe(struct net_device *dev) +{ + struct sonic_local* lp = netdev_priv(dev); + int sr; + bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM; + + /* Bogus probing, on the models which may or may not have + Ethernet (BTW, the Ethernet *is* always at the same + address, and nothing else lives there, at least if Apple's + documentation is to be believed) */ + if (commslot || macintosh_config->ident == MAC_MODEL_C610) { + int card_present; + + card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); + if (!card_present) { + pr_info("Onboard/comm-slot SONIC not found\n"); + return -ENODEV; + } + } + + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ + dev->base_addr = ONBOARD_SONIC_REGISTERS; + if (via_alt_mapping) + dev->irq = IRQ_AUTO_3; + else + dev->irq = IRQ_NUBUS_9; + + /* The PowerBook's SONIC is 16 bit always. */ + if (macintosh_config->ident == MAC_MODEL_PB520) { + lp->reg_offset = 0; + lp->dma_bitmode = SONIC_BITMODE16; + } else if (commslot) { + /* Some of the comm-slot cards are 16 bit. But some + of them are not. The 32-bit cards use offset 2 and + have known revisions, we try reading the revision + register at offset 2, if we don't get a known revision + we assume 16 bit at offset 0. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE16; + + sr = SONIC_READ(SONIC_SR); + if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) + /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ + lp->dma_bitmode = SONIC_BITMODE32; + else { + lp->dma_bitmode = SONIC_BITMODE16; + lp->reg_offset = 0; + } + } else { + /* All onboard cards are at offset 2 with 32 bit DMA. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE32; + } + + pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n", + SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16, + lp->reg_offset); + + /* This is sometimes useful to find out how MacOS configured the card */ + pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, + SONIC_READ(SONIC_DCR) & 0xffff, + SONIC_READ(SONIC_DCR2) & 0xffff); + + /* Software reset, then initialize control registers. */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + (lp->dma_bitmode ? SONIC_DCR_DW : 0)); + + /* This *must* be written back to in order to restore the + * extended programmable output bits, as it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); + + /* Clear *and* disable interrupts to be on the safe side */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + + /* Now look for the MAC address. */ + mac_onboard_sonic_ethernet_addr(dev); + + pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", + dev->base_addr, dev->dev_addr, dev->irq); + + /* Shared init code */ + return macsonic_init(dev); +} + +static int mac_sonic_nubus_ethernet_addr(struct net_device *dev, + unsigned long prom_addr, int id) +{ + int i; + for(i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + + /* Some of the addresses are bit-reversed */ + if (id != MACSONIC_DAYNA) + bit_reverse_addr(dev->dev_addr); + + return 0; +} + +static int macsonic_ident(struct nubus_rsrc *fres) +{ + if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC && + fres->dr_sw == NUBUS_DRSW_SONIC_LC) + return MACSONIC_DAYNALINK; + if (fres->dr_hw == NUBUS_DRHW_SONIC && + fres->dr_sw == NUBUS_DRSW_APPLE) { + /* There has to be a better way to do this... */ + if (strstr(fres->board->name, "DuoDock")) + return MACSONIC_DUODOCK; + else + return MACSONIC_APPLE; + } + + if (fres->dr_hw == NUBUS_DRHW_SMC9194 && + fres->dr_sw == NUBUS_DRSW_DAYNA) + return MACSONIC_DAYNA; + + if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && + fres->dr_sw == 0) { /* huh? */ + return MACSONIC_APPLE16; + } + return -1; +} + +static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id, + struct net_device *dev) +{ + struct sonic_local* lp = netdev_priv(dev); + unsigned long base_addr, prom_addr; + u16 sonic_dcr; + int reg_offset, dma_bitmode; + + switch (id) { + case MACSONIC_DUODOCK: + base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS; + prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | + SONIC_DCR_TFT0; + reg_offset = 2; + dma_bitmode = SONIC_BITMODE32; + break; + case MACSONIC_APPLE: + base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE32; + break; + case MACSONIC_APPLE16: + base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + case MACSONIC_DAYNALINK: + base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = board->slot_addr + DAYNALINK_PROM_BASE; + sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + case MACSONIC_DAYNA: + base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS; + prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR; + sonic_dcr = SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + default: + printk(KERN_ERR "macsonic: WTF, id is %d\n", id); + return -ENODEV; + } + + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ + dev->base_addr = base_addr; + lp->reg_offset = reg_offset; + lp->dma_bitmode = dma_bitmode; + dev->irq = SLOT2IRQ(board->slot); + + dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n", + board->name, SONIC_READ(SONIC_SR), + lp->dma_bitmode ? 32 : 16, lp->reg_offset); + + /* This is sometimes useful to find out how MacOS configured the card */ + dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, + SONIC_READ(SONIC_DCR) & 0xffff, + SONIC_READ(SONIC_DCR2) & 0xffff); + + /* Software reset, then initialize control registers. */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); + /* This *must* be written back to in order to restore the + * extended programmable output bits, since it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); + + /* Clear *and* disable interrupts to be on the safe side */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + + /* Now look for the MAC address. */ + if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0) + return -ENODEV; + + dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", + dev->base_addr, dev->dev_addr, dev->irq); + + /* Shared init code */ + return macsonic_init(dev); +} + +static int mac_sonic_platform_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + int err; + + dev = alloc_etherdev(sizeof(struct sonic_local)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); + + err = mac_onboard_sonic_probe(dev); + if (err) + goto out; + + sonic_msg_init(dev); + + err = register_netdev(dev); + if (err) + goto undo_probe; + + return 0; + +undo_probe: + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); +MODULE_ALIAS("platform:macsonic"); + +#include "sonic.c" + +static int mac_sonic_platform_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local* lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + free_netdev(dev); + + return 0; +} + +static struct platform_driver mac_sonic_platform_driver = { + .probe = mac_sonic_platform_probe, + .remove = mac_sonic_platform_remove, + .driver = { + .name = "macsonic", + }, +}; + +static int mac_sonic_nubus_probe(struct nubus_board *board) +{ + struct net_device *ndev; + struct sonic_local *lp; + struct nubus_rsrc *fres; + int id = -1; + int err; + + /* The platform driver will handle a PDS or Comm Slot card (even if + * it has a pseudoslot declaration ROM). + */ + if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM) + return -ENODEV; + + for_each_board_func_rsrc(board, fres) { + if (fres->category != NUBUS_CAT_NETWORK || + fres->type != NUBUS_TYPE_ETHERNET) + continue; + + id = macsonic_ident(fres); + if (id != -1) + break; + } + if (!fres) + return -ENODEV; + + ndev = alloc_etherdev(sizeof(struct sonic_local)); + if (!ndev) + return -ENOMEM; + + lp = netdev_priv(ndev); + lp->device = &board->dev; + SET_NETDEV_DEV(ndev, &board->dev); + + err = mac_sonic_nubus_probe_board(board, id, ndev); + if (err) + goto out; + + sonic_msg_init(ndev); + + err = register_netdev(ndev); + if (err) + goto undo_probe; + + nubus_set_drvdata(board, ndev); + + return 0; + +undo_probe: + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); +out: + free_netdev(ndev); + return err; +} + +static int mac_sonic_nubus_remove(struct nubus_board *board) +{ + struct net_device *ndev = nubus_get_drvdata(board); + struct sonic_local *lp = netdev_priv(ndev); + + unregister_netdev(ndev); + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + free_netdev(ndev); + + return 0; +} + +static struct nubus_driver mac_sonic_nubus_driver = { + .probe = mac_sonic_nubus_probe, + .remove = mac_sonic_nubus_remove, + .driver = { + .name = "macsonic-nubus", + .owner = THIS_MODULE, + }, +}; + +static int perr, nerr; + +static int __init mac_sonic_init(void) +{ + perr = platform_driver_register(&mac_sonic_platform_driver); + nerr = nubus_driver_register(&mac_sonic_nubus_driver); + return 0; +} +module_init(mac_sonic_init); + +static void __exit mac_sonic_exit(void) +{ + if (!perr) + platform_driver_unregister(&mac_sonic_platform_driver); + if (!nerr) + nubus_driver_unregister(&mac_sonic_nubus_driver); +} +module_exit(mac_sonic_exit); diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c new file mode 100644 index 000000000..14a17ad73 --- /dev/null +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -0,0 +1,3383 @@ +/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */ +/* + Written/copyright 1999-2001 by Donald Becker. + Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com) + Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com) + Portions copyright 2004 Harald Welte <laforge@gnumonks.org> + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. License for under other terms may be + available. Contact the original author for details. + + The original author may be reached as becker@scyld.com, or at + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support information and updates available at + http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] + + + TODO: + * big endian support with CFG:BEM instead of cpu_to_le32 +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/delay.h> +#include <linux/rtnetlink.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <linux/bitops.h> +#include <linux/prefetch.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/uaccess.h> + +#define DRV_NAME "natsemi" +#define DRV_VERSION "2.1" +#define DRV_RELDATE "Sept 11, 2006" + +#define RX_OFFSET 2 + +/* Updated to recommendations in pci-skeleton v2.03. */ + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +#define NATSEMI_DEF_MSG (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_WOL | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) +static int debug = -1; + +static int mtu; + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + This chip uses a 512 element hash table based on the Ethernet CRC. */ +static const int multicast_filter_limit = 100; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +static int rx_copybreak; + +static int dspcfg_workaround = 1; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS]; +static int full_duplex[MAX_UNITS]; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used, min 4. */ +#define RX_RING_SIZE 32 + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define NATSEMI_HW_TIMEOUT 400 +#define NATSEMI_TIMER_FREQ 5*HZ +#define NATSEMI_PG0_NREGS 64 +#define NATSEMI_RFDR_NREGS 8 +#define NATSEMI_PG1_NREGS 4 +#define NATSEMI_NREGS (NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \ + NATSEMI_PG1_NREGS) +#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ +#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) + +/* Buffer sizes: + * The nic writes 32-bit values, even if the upper bytes of + * a 32-bit value are beyond the end of the buffer. + */ +#define NATSEMI_HEADERS 22 /* 2*mac,type,vlan,crc */ +#define NATSEMI_PADDING 16 /* 2 bytes should be sufficient */ +#define NATSEMI_LONGPKT 1518 /* limit for normal packets */ +#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */ + +/* These identify the driver base version and may not be removed. */ +static const char version[] = + KERN_INFO DRV_NAME " dp8381x driver, version " + DRV_VERSION ", " DRV_RELDATE "\n" + " originally by Donald Becker <becker@scyld.com>\n" + " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(mtu, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(dspcfg_workaround, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); +MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); +MODULE_PARM_DESC(debug, "DP8381x default debug level"); +MODULE_PARM_DESC(rx_copybreak, + "DP8381x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround"); +MODULE_PARM_DESC(options, + "DP8381x: Bits 0-3: media type, bit 17: full duplex"); +MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC. +It also works with other chips in in the DP83810 series. + +II. Board-specific settings + +This driver requires the PCI interrupt line to be valid. +It honors the EEPROM-set values. + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. +The NatSemi design uses a 'next descriptor' pointer that the driver forms +into a list. + +IIIb/c. Transmit/Receive Structure + +This driver uses a zero-copy receive and transmit scheme. +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in a later phase of receives. + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +A subtle aspect of the operation is that unaligned buffers are not permitted +by the hardware. Thus the IP header at offset 14 in an ethernet frame isn't +longword aligned for further processing. On copies frames are put into the +skbuff at an offset of "+2", 16-byte aligning the IP header. + +IIId. Synchronization + +Most operations are synchronized on the np->lock irq spinlock, except the +receive and transmit paths which are synchronised using a combination of +hardware descriptor ownership, disabling interrupts and NAPI poll scheduling. + +IVb. References + +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html +Datasheet is available from: +http://www.national.com/pf/DP/DP83815.html + +IVc. Errata + +None characterised. +*/ + + + +/* + * Support for fibre connections on Am79C874: + * This phy needs a special setup when connected to a fibre cable. + * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf + */ +#define PHYID_AM79C874 0x0022561b + +enum { + MII_MCTRL = 0x15, /* mode control register */ + MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ + MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ +}; + +enum { + NATSEMI_FLAG_IGNORE_PHY = 0x1, +}; + +/* array of board data directly indexed by pci_tbl[x].driver_data */ +static struct { + const char *name; + unsigned long flags; + unsigned int eeprom_size; +} natsemi_pci_info[] = { + { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 }, + { "NatSemi DP8381[56]", 0, 24 }, +}; + +static const struct pci_device_id natsemi_pci_tbl[] = { + { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 }, + { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. +*/ +enum register_offsets { + ChipCmd = 0x00, + ChipConfig = 0x04, + EECtrl = 0x08, + PCIBusCfg = 0x0C, + IntrStatus = 0x10, + IntrMask = 0x14, + IntrEnable = 0x18, + IntrHoldoff = 0x1C, /* DP83816 only */ + TxRingPtr = 0x20, + TxConfig = 0x24, + RxRingPtr = 0x30, + RxConfig = 0x34, + ClkRun = 0x3C, + WOLCmd = 0x40, + PauseCmd = 0x44, + RxFilterAddr = 0x48, + RxFilterData = 0x4C, + BootRomAddr = 0x50, + BootRomData = 0x54, + SiliconRev = 0x58, + StatsCtrl = 0x5C, + StatsData = 0x60, + RxPktErrs = 0x60, + RxMissed = 0x68, + RxCRCErrs = 0x64, + BasicControl = 0x80, + BasicStatus = 0x84, + AnegAdv = 0x90, + AnegPeer = 0x94, + PhyStatus = 0xC0, + MIntrCtrl = 0xC4, + MIntrStatus = 0xC8, + PhyCtrl = 0xE4, + + /* These are from the spec, around page 78... on a separate table. + * The meaning of these registers depend on the value of PGSEL. */ + PGSEL = 0xCC, + PMDCSR = 0xE4, + TSTDAT = 0xFC, + DSPCFG = 0xF4, + SDCFG = 0xF8 +}; +/* the values for the 'magic' registers above (PGSEL=1) */ +#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */ +#define TSTDAT_VAL 0x0 +#define DSPCFG_VAL 0x5040 +#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */ +#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */ +#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */ +#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */ + +/* misc PCI space registers */ +enum pci_register_offsets { + PCIPM = 0x44, +}; + +enum ChipCmd_bits { + ChipReset = 0x100, + RxReset = 0x20, + TxReset = 0x10, + RxOff = 0x08, + RxOn = 0x04, + TxOff = 0x02, + TxOn = 0x01, +}; + +enum ChipConfig_bits { + CfgPhyDis = 0x200, + CfgPhyRst = 0x400, + CfgExtPhy = 0x1000, + CfgAnegEnable = 0x2000, + CfgAneg100 = 0x4000, + CfgAnegFull = 0x8000, + CfgAnegDone = 0x8000000, + CfgFullDuplex = 0x20000000, + CfgSpeed100 = 0x40000000, + CfgLink = 0x80000000, +}; + +enum EECtrl_bits { + EE_ShiftClk = 0x04, + EE_DataIn = 0x01, + EE_ChipSelect = 0x08, + EE_DataOut = 0x02, + MII_Data = 0x10, + MII_Write = 0x20, + MII_ShiftClk = 0x40, +}; + +enum PCIBusCfg_bits { + EepromReload = 0x4, +}; + +/* Bits in the interrupt status/mask registers. */ +enum IntrStatus_bits { + IntrRxDone = 0x0001, + IntrRxIntr = 0x0002, + IntrRxErr = 0x0004, + IntrRxEarly = 0x0008, + IntrRxIdle = 0x0010, + IntrRxOverrun = 0x0020, + IntrTxDone = 0x0040, + IntrTxIntr = 0x0080, + IntrTxErr = 0x0100, + IntrTxIdle = 0x0200, + IntrTxUnderrun = 0x0400, + StatsMax = 0x0800, + SWInt = 0x1000, + WOLPkt = 0x2000, + LinkChange = 0x4000, + IntrHighBits = 0x8000, + RxStatusFIFOOver = 0x10000, + IntrPCIErr = 0xf00000, + RxResetDone = 0x1000000, + TxResetDone = 0x2000000, + IntrAbnormalSummary = 0xCD20, +}; + +/* + * Default Interrupts: + * Rx OK, Rx Packet Error, Rx Overrun, + * Tx OK, Tx Packet Error, Tx Underrun, + * MIB Service, Phy Interrupt, High Bits, + * Rx Status FIFO overrun, + * Received Target Abort, Received Master Abort, + * Signalled System Error, Received Parity Error + */ +#define DEFAULT_INTR 0x00f1cd65 + +enum TxConfig_bits { + TxDrthMask = 0x3f, + TxFlthMask = 0x3f00, + TxMxdmaMask = 0x700000, + TxMxdma_512 = 0x0, + TxMxdma_4 = 0x100000, + TxMxdma_8 = 0x200000, + TxMxdma_16 = 0x300000, + TxMxdma_32 = 0x400000, + TxMxdma_64 = 0x500000, + TxMxdma_128 = 0x600000, + TxMxdma_256 = 0x700000, + TxCollRetry = 0x800000, + TxAutoPad = 0x10000000, + TxMacLoop = 0x20000000, + TxHeartIgn = 0x40000000, + TxCarrierIgn = 0x80000000 +}; + +/* + * Tx Configuration: + * - 256 byte DMA burst length + * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free) + * - 64 bytes initial drain threshold (i.e. begin actual transmission + * when 64 byte are in the fifo) + * - on tx underruns, increase drain threshold by 64. + * - at most use a drain threshold of 1472 bytes: The sum of the fill + * threshold and the drain threshold must be less than 2016 bytes. + * + */ +#define TX_FLTH_VAL ((512/32) << 8) +#define TX_DRTH_VAL_START (64/32) +#define TX_DRTH_VAL_INC 2 +#define TX_DRTH_VAL_LIMIT (1472/32) + +enum RxConfig_bits { + RxDrthMask = 0x3e, + RxMxdmaMask = 0x700000, + RxMxdma_512 = 0x0, + RxMxdma_4 = 0x100000, + RxMxdma_8 = 0x200000, + RxMxdma_16 = 0x300000, + RxMxdma_32 = 0x400000, + RxMxdma_64 = 0x500000, + RxMxdma_128 = 0x600000, + RxMxdma_256 = 0x700000, + RxAcceptLong = 0x8000000, + RxAcceptTx = 0x10000000, + RxAcceptRunt = 0x40000000, + RxAcceptErr = 0x80000000 +}; +#define RX_DRTH_VAL (128/8) + +enum ClkRun_bits { + PMEEnable = 0x100, + PMEStatus = 0x8000, +}; + +enum WolCmd_bits { + WakePhy = 0x1, + WakeUnicast = 0x2, + WakeMulticast = 0x4, + WakeBroadcast = 0x8, + WakeArp = 0x10, + WakePMatch0 = 0x20, + WakePMatch1 = 0x40, + WakePMatch2 = 0x80, + WakePMatch3 = 0x100, + WakeMagic = 0x200, + WakeMagicSecure = 0x400, + SecureHack = 0x100000, + WokePhy = 0x400000, + WokeUnicast = 0x800000, + WokeMulticast = 0x1000000, + WokeBroadcast = 0x2000000, + WokeArp = 0x4000000, + WokePMatch0 = 0x8000000, + WokePMatch1 = 0x10000000, + WokePMatch2 = 0x20000000, + WokePMatch3 = 0x40000000, + WokeMagic = 0x80000000, + WakeOptsSummary = 0x7ff +}; + +enum RxFilterAddr_bits { + RFCRAddressMask = 0x3ff, + AcceptMulticast = 0x00200000, + AcceptMyPhys = 0x08000000, + AcceptAllPhys = 0x10000000, + AcceptAllMulticast = 0x20000000, + AcceptBroadcast = 0x40000000, + RxFilterEnable = 0x80000000 +}; + +enum StatsCtrl_bits { + StatsWarn = 0x1, + StatsFreeze = 0x2, + StatsClear = 0x4, + StatsStrobe = 0x8, +}; + +enum MIntrCtrl_bits { + MICRIntEn = 0x2, +}; + +enum PhyCtrl_bits { + PhyAddrMask = 0x1f, +}; + +#define PHY_ADDR_NONE 32 +#define PHY_ADDR_INTERNAL 1 + +/* values we might find in the silicon revision register */ +#define SRR_DP83815_C 0x0302 +#define SRR_DP83815_D 0x0403 +#define SRR_DP83816_A4 0x0504 +#define SRR_DP83816_A5 0x0505 + +/* The Rx and Tx buffer descriptors. */ +/* Note that using only 32 bit fields simplifies conversion to big-endian + architectures. */ +struct netdev_desc { + __le32 next_desc; + __le32 cmd_status; + __le32 addr; + __le32 software_use; +}; + +/* Bits in network_desc.status */ +enum desc_status_bits { + DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000, + DescNoCRC=0x10000000, DescPktOK=0x08000000, + DescSizeMask=0xfff, + + DescTxAbort=0x04000000, DescTxFIFO=0x02000000, + DescTxCarrier=0x01000000, DescTxDefer=0x00800000, + DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000, + DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000, + + DescRxAbort=0x04000000, DescRxOver=0x02000000, + DescRxDest=0x01800000, DescRxLong=0x00400000, + DescRxRunt=0x00200000, DescRxInvalid=0x00100000, + DescRxCRC=0x00080000, DescRxAlign=0x00040000, + DescRxLoop=0x00020000, DesRxColl=0x00010000, +}; + +struct netdev_private { + /* Descriptor rings first for alignment */ + dma_addr_t ring_dma; + struct netdev_desc *rx_ring; + struct netdev_desc *tx_ring; + /* The addresses of receive-in-place skbuffs */ + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + dma_addr_t rx_dma[RX_RING_SIZE]; + /* address of a sent-in-place packet/buffer, for later free() */ + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + dma_addr_t tx_dma[TX_RING_SIZE]; + struct net_device *dev; + void __iomem *ioaddr; + struct napi_struct napi; + /* Media monitoring timer */ + struct timer_list timer; + /* Frequently used values: keep some adjacent for cache effect */ + struct pci_dev *pci_dev; + struct netdev_desc *rx_head_desc; + /* Producer/consumer ring indices */ + unsigned int cur_rx, dirty_rx; + unsigned int cur_tx, dirty_tx; + /* Based on MTU+slack. */ + unsigned int rx_buf_sz; + int oom; + /* Interrupt status */ + u32 intr_status; + /* Do not touch the nic registers */ + int hands_off; + /* Don't pay attention to the reported link state. */ + int ignore_phy; + /* external phy that is used: only valid if dev->if_port != PORT_TP */ + int mii; + int phy_addr_external; + unsigned int full_duplex; + /* Rx filter */ + u32 cur_rx_mode; + u32 rx_filter[16]; + /* FIFO and PCI burst thresholds */ + u32 tx_config, rx_config; + /* original contents of ClkRun register */ + u32 SavedClkRun; + /* silicon revision */ + u32 srr; + /* expected DSPCFG value */ + u16 dspcfg; + int dspcfg_workaround; + /* parms saved in ethtool format */ + u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + u8 duplex; /* Duplex, half or full */ + u8 autoneg; /* Autonegotiation enabled */ + /* MII transceiver section */ + u16 advertising; + unsigned int iosize; + spinlock_t lock; + u32 msg_enable; + /* EEPROM data */ + int eeprom_size; +}; + +static void move_int_phy(struct net_device *dev, int addr); +static int eeprom_read(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *dev, int reg); +static void mdio_write(struct net_device *dev, int reg, u16 data); +static void init_phy_fixup(struct net_device *dev); +static int miiport_read(struct net_device *dev, int phy_id, int reg); +static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data); +static int find_mii(struct net_device *dev); +static void natsemi_reset(struct net_device *dev); +static void natsemi_reload_eeprom(struct net_device *dev); +static void natsemi_stop_rxtx(struct net_device *dev); +static int netdev_open(struct net_device *dev); +static void do_cable_magic(struct net_device *dev); +static void undo_cable_magic(struct net_device *dev); +static void check_link(struct net_device *dev); +static void netdev_timer(struct timer_list *t); +static void dump_ring(struct net_device *dev); +static void ns_tx_timeout(struct net_device *dev, unsigned int txqueue); +static int alloc_ring(struct net_device *dev); +static void refill_rx(struct net_device *dev); +static void init_ring(struct net_device *dev); +static void drain_tx(struct net_device *dev); +static void drain_ring(struct net_device *dev); +static void free_ring(struct net_device *dev); +static void reinit_ring(struct net_device *dev); +static void init_registers(struct net_device *dev); +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance); +static void netdev_error(struct net_device *dev, int intr_status); +static int natsemi_poll(struct napi_struct *napi, int budget); +static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do); +static void netdev_tx_done(struct net_device *dev); +static int natsemi_change_mtu(struct net_device *dev, int new_mtu); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void natsemi_poll_controller(struct net_device *dev); +#endif +static void __set_rx_mode(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static void __get_stats(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int netdev_set_wol(struct net_device *dev, u32 newval); +static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur); +static int netdev_set_sopass(struct net_device *dev, u8 *newval); +static int netdev_get_sopass(struct net_device *dev, u8 *data); +static int netdev_get_ecmd(struct net_device *dev, + struct ethtool_link_ksettings *ecmd); +static int netdev_set_ecmd(struct net_device *dev, + const struct ethtool_link_ksettings *ecmd); +static void enable_wol_mode(struct net_device *dev, int enable_intr); +static int netdev_close(struct net_device *dev); +static int netdev_get_regs(struct net_device *dev, u8 *buf); +static int netdev_get_eeprom(struct net_device *dev, u8 *buf); +static const struct ethtool_ops ethtool_ops; + +#define NATSEMI_ATTR(_name) \ +static ssize_t natsemi_show_##_name(struct device *dev, \ + struct device_attribute *attr, char *buf); \ + static ssize_t natsemi_set_##_name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count); \ + static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name) + +#define NATSEMI_CREATE_FILE(_dev, _name) \ + device_create_file(&_dev->dev, &dev_attr_##_name) +#define NATSEMI_REMOVE_FILE(_dev, _name) \ + device_remove_file(&_dev->dev, &dev_attr_##_name) + +NATSEMI_ATTR(dspcfg_workaround); + +static ssize_t natsemi_show_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + + return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off"); +} + +static ssize_t natsemi_set_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + int new_setting; + unsigned long flags; + + /* Find out the new setting */ + if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1)) + new_setting = 1; + else if (!strncmp("off", buf, count - 1) || + !strncmp("0", buf, count - 1)) + new_setting = 0; + else + return count; + + spin_lock_irqsave(&np->lock, flags); + + np->dspcfg_workaround = new_setting; + + spin_unlock_irqrestore(&np->lock, flags); + + return count; +} + +static inline void __iomem *ns_ioaddr(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + return np->ioaddr; +} + +static inline void natsemi_irq_enable(struct net_device *dev) +{ + writel(1, ns_ioaddr(dev) + IntrEnable); + readl(ns_ioaddr(dev) + IntrEnable); +} + +static inline void natsemi_irq_disable(struct net_device *dev) +{ + writel(0, ns_ioaddr(dev) + IntrEnable); + readl(ns_ioaddr(dev) + IntrEnable); +} + +static void move_int_phy(struct net_device *dev, int addr) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int target = 31; + + /* + * The internal phy is visible on the external mii bus. Therefore we must + * move it away before we can send commands to an external phy. + * There are two addresses we must avoid: + * - the address on the external phy that is used for transmission. + * - the address that we want to access. User space can access phys + * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the + * phy that is used for transmission. + */ + + if (target == addr) + target--; + if (target == np->phy_addr_external) + target--; + writew(target, ioaddr + PhyCtrl); + readw(ioaddr + PhyCtrl); + udelay(1); +} + +static void natsemi_init_media(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u32 tmp; + + if (np->ignore_phy) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + /* get the initial settings from hardware */ + tmp = mdio_read(dev, MII_BMCR); + np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; + np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; + np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; + np->advertising= mdio_read(dev, MII_ADVERTISE); + + if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL && + netif_msg_probe(np)) { + printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " + "10%s %s duplex.\n", + pci_name(np->pci_dev), + (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? + "enabled, advertise" : "disabled, force", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_100HALF))? + "0" : "", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_10FULL))? + "full" : "half"); + } + if (netif_msg_probe(np)) + printk(KERN_INFO + "natsemi %s: Transceiver status %#04x advertising %#04x.\n", + pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), + np->advertising); + +} + +static const struct net_device_ops natsemi_netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_get_stats = get_stats, + .ndo_set_rx_mode = set_rx_mode, + .ndo_change_mtu = natsemi_change_mtu, + .ndo_do_ioctl = netdev_ioctl, + .ndo_tx_timeout = ns_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = natsemi_poll_controller, +#endif +}; + +static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + int i, option, irq, chip_idx = ent->driver_data; + static int find_cnt = -1; + resource_size_t iostart; + unsigned long iosize; + void __iomem *ioaddr; + const int pcibar = 1; /* PCI base address register */ + int prev_eedata; + u32 tmp; + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + i = pcim_enable_device(pdev); + if (i) return i; + + /* natsemi has a non-standard PM control register + * in PCI config space. Some boards apparently need + * to be brought to D0 in this manner. + */ + pci_read_config_dword(pdev, PCIPM, &tmp); + if (tmp & PCI_PM_CTRL_STATE_MASK) { + /* D0 state, disable PME assertion */ + u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK; + pci_write_config_dword(pdev, PCIPM, newtmp); + } + + find_cnt++; + iostart = pci_resource_start(pdev, pcibar); + iosize = pci_resource_len(pdev, pcibar); + irq = pdev->irq; + + pci_set_master(pdev); + + dev = alloc_etherdev(sizeof (struct netdev_private)); + if (!dev) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + i = pci_request_regions(pdev, DRV_NAME); + if (i) + goto err_pci_request_regions; + + ioaddr = ioremap(iostart, iosize); + if (!ioaddr) { + i = -ENOMEM; + goto err_pci_request_regions; + } + + /* Work around the dropped serial bit. */ + prev_eedata = eeprom_read(ioaddr, 6); + for (i = 0; i < 3; i++) { + int eedata = eeprom_read(ioaddr, i + 7); + dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15); + dev->dev_addr[i*2+1] = eedata >> 7; + prev_eedata = eedata; + } + + np = netdev_priv(dev); + np->ioaddr = ioaddr; + + netif_napi_add(dev, &np->napi, natsemi_poll, 64); + np->dev = dev; + + np->pci_dev = pdev; + pci_set_drvdata(pdev, dev); + np->iosize = iosize; + spin_lock_init(&np->lock); + np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG; + np->hands_off = 0; + np->intr_status = 0; + np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; + if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY) + np->ignore_phy = 1; + else + np->ignore_phy = 0; + np->dspcfg_workaround = dspcfg_workaround; + + /* Initial port: + * - If configured to ignore the PHY set up for external. + * - If the nic was configured to use an external phy and if find_mii + * finds a phy: use external port, first phy that replies. + * - Otherwise: internal port. + * Note that the phy address for the internal phy doesn't matter: + * The address would be used to access a phy over the mii bus, but + * the internal phy is accessed through mapped registers. + */ + if (np->ignore_phy || readl(ioaddr + ChipConfig) & CfgExtPhy) + dev->if_port = PORT_MII; + else + dev->if_port = PORT_TP; + /* Reset the chip to erase previous misconfiguration. */ + natsemi_reload_eeprom(dev); + natsemi_reset(dev); + + if (dev->if_port != PORT_TP) { + np->phy_addr_external = find_mii(dev); + /* If we're ignoring the PHY it doesn't matter if we can't + * find one. */ + if (!np->ignore_phy && np->phy_addr_external == PHY_ADDR_NONE) { + dev->if_port = PORT_TP; + np->phy_addr_external = PHY_ADDR_INTERNAL; + } + } else { + np->phy_addr_external = PHY_ADDR_INTERNAL; + } + + option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; + /* The lower four bits are the media type. */ + if (option) { + if (option & 0x200) + np->full_duplex = 1; + if (option & 15) + printk(KERN_INFO + "natsemi %s: ignoring user supplied media type %d", + pci_name(np->pci_dev), option & 15); + } + if (find_cnt < MAX_UNITS && full_duplex[find_cnt]) + np->full_duplex = 1; + + dev->netdev_ops = &natsemi_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + dev->ethtool_ops = ðtool_ops; + + /* MTU range: 64 - 2024 */ + dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN; + dev->max_mtu = NATSEMI_RX_LIMIT - NATSEMI_HEADERS; + + if (mtu) + dev->mtu = mtu; + + natsemi_init_media(dev); + + /* save the silicon revision for later querying */ + np->srr = readl(ioaddr + SiliconRev); + if (netif_msg_hw(np)) + printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n", + pci_name(np->pci_dev), np->srr); + + i = register_netdev(dev); + if (i) + goto err_register_netdev; + i = NATSEMI_CREATE_FILE(pdev, dspcfg_workaround); + if (i) + goto err_create_file; + + if (netif_msg_drv(np)) { + printk(KERN_INFO "natsemi %s: %s at %#08llx " + "(%s), %pM, IRQ %d", + dev->name, natsemi_pci_info[chip_idx].name, + (unsigned long long)iostart, pci_name(np->pci_dev), + dev->dev_addr, irq); + if (dev->if_port == PORT_TP) + printk(", port TP.\n"); + else if (np->ignore_phy) + printk(", port MII, ignoring PHY\n"); + else + printk(", port MII, phy ad %d.\n", np->phy_addr_external); + } + return 0; + + err_create_file: + unregister_netdev(dev); + + err_register_netdev: + iounmap(ioaddr); + + err_pci_request_regions: + free_netdev(dev); + return i; +} + + +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. + The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */ + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need + a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that + made udelay() unreliable. + The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is + deprecated. +*/ +#define eeprom_delay(ee_addr) readl(ee_addr) + +#define EE_Write0 (EE_ChipSelect) +#define EE_Write1 (EE_ChipSelect | EE_DataIn) + +/* The EEPROM commands include the alway-set leading bit. */ +enum EEPROM_Cmds { + EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), +}; + +static int eeprom_read(void __iomem *addr, int location) +{ + int i; + int retval = 0; + void __iomem *ee_addr = addr + EECtrl; + int read_cmd = location | EE_ReadCmd; + + writel(EE_Write0, ee_addr); + + /* Shift the read command bits out. */ + for (i = 10; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; + writel(dataval, ee_addr); + eeprom_delay(ee_addr); + writel(dataval | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + } + writel(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + + for (i = 0; i < 16; i++) { + writel(EE_ChipSelect | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0; + writel(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + } + + /* Terminate the EEPROM access. */ + writel(EE_Write0, ee_addr); + writel(0, ee_addr); + return retval; +} + +/* MII transceiver control section. + * The 83815 series has an internal transceiver, and we present the + * internal management registers as if they were MII connected. + * External Phy registers are referenced through the MII interface. + */ + +/* clock transitions >= 20ns (25MHz) + * One readl should be good to PCI @ 100MHz + */ +#define mii_delay(ioaddr) readl(ioaddr + EECtrl) + +static int mii_getbit (struct net_device *dev) +{ + int data; + void __iomem *ioaddr = ns_ioaddr(dev); + + writel(MII_ShiftClk, ioaddr + EECtrl); + data = readl(ioaddr + EECtrl); + writel(0, ioaddr + EECtrl); + mii_delay(ioaddr); + return (data & MII_Data)? 1 : 0; +} + +static void mii_send_bits (struct net_device *dev, u32 data, int len) +{ + u32 i; + void __iomem *ioaddr = ns_ioaddr(dev); + + for (i = (1 << (len-1)); i; i >>= 1) + { + u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0); + writel(mdio_val, ioaddr + EECtrl); + mii_delay(ioaddr); + writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl); + mii_delay(ioaddr); + } + writel(0, ioaddr + EECtrl); + mii_delay(ioaddr); +} + +static int miiport_read(struct net_device *dev, int phy_id, int reg) +{ + u32 cmd; + int i; + u32 retval = 0; + + /* Ensure sync */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP = 0110'b for read operation */ + cmd = (0x06 << 10) | (phy_id << 5) | reg; + mii_send_bits (dev, cmd, 14); + /* Turnaround */ + if (mii_getbit (dev)) + return 0; + /* Read data */ + for (i = 0; i < 16; i++) { + retval <<= 1; + retval |= mii_getbit (dev); + } + /* End cycle */ + mii_getbit (dev); + return retval; +} + +static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data) +{ + u32 cmd; + + /* Ensure sync */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ + cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data; + mii_send_bits (dev, cmd, 32); + /* End cycle */ + mii_getbit (dev); +} + +static int mdio_read(struct net_device *dev, int reg) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* The 83815 series has two ports: + * - an internal transceiver + * - an external mii bus + */ + if (dev->if_port == PORT_TP) + return readw(ioaddr+BasicControl+(reg<<2)); + else + return miiport_read(dev, np->phy_addr_external, reg); +} + +static void mdio_write(struct net_device *dev, int reg, u16 data) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* The 83815 series has an internal transceiver; handle separately */ + if (dev->if_port == PORT_TP) + writew(data, ioaddr+BasicControl+(reg<<2)); + else + miiport_write(dev, np->phy_addr_external, reg, data); +} + +static void init_phy_fixup(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + u32 cfg; + u16 tmp; + + /* restore stuff lost when power was out */ + tmp = mdio_read(dev, MII_BMCR); + if (np->autoneg == AUTONEG_ENABLE) { + /* renegotiate if something changed */ + if ((tmp & BMCR_ANENABLE) == 0 || + np->advertising != mdio_read(dev, MII_ADVERTISE)) + { + /* turn on autonegotiation and force negotiation */ + tmp |= (BMCR_ANENABLE | BMCR_ANRESTART); + mdio_write(dev, MII_ADVERTISE, np->advertising); + } + } else { + /* turn off auto negotiation, set speed and duplexity */ + tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX); + if (np->speed == SPEED_100) + tmp |= BMCR_SPEED100; + if (np->duplex == DUPLEX_FULL) + tmp |= BMCR_FULLDPLX; + /* + * Note: there is no good way to inform the link partner + * that our capabilities changed. The user has to unplug + * and replug the network cable after some changes, e.g. + * after switching from 10HD, autoneg off to 100 HD, + * autoneg off. + */ + } + mdio_write(dev, MII_BMCR, tmp); + readl(ioaddr + ChipConfig); + udelay(1); + + /* find out what phy this is */ + np->mii = (mdio_read(dev, MII_PHYSID1) << 16) + + mdio_read(dev, MII_PHYSID2); + + /* handle external phys here */ + switch (np->mii) { + case PHYID_AM79C874: + /* phy specific configuration for fibre/tp operation */ + tmp = mdio_read(dev, MII_MCTRL); + tmp &= ~(MII_FX_SEL | MII_EN_SCRM); + if (dev->if_port == PORT_FIBRE) + tmp |= MII_FX_SEL; + else + tmp |= MII_EN_SCRM; + mdio_write(dev, MII_MCTRL, tmp); + break; + default: + break; + } + cfg = readl(ioaddr + ChipConfig); + if (cfg & CfgExtPhy) + return; + + /* On page 78 of the spec, they recommend some settings for "optimum + performance" to be done in sequence. These settings optimize some + of the 100Mbit autodetection circuitry. They say we only want to + do this for rev C of the chip, but engineers at NSC (Bradley + Kennedy) recommends always setting them. If you don't, you get + errors on some autonegotiations that make the device unusable. + + It seems that the DSP needs a few usec to reinitialize after + the start of the phy. Just retry writing these values until they + stick. + */ + for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { + + int dspcfg; + writew(1, ioaddr + PGSEL); + writew(PMDCSR_VAL, ioaddr + PMDCSR); + writew(TSTDAT_VAL, ioaddr + TSTDAT); + np->dspcfg = (np->srr <= SRR_DP83815_C)? + DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG)); + writew(np->dspcfg, ioaddr + DSPCFG); + writew(SDCFG_VAL, ioaddr + SDCFG); + writew(0, ioaddr + PGSEL); + readl(ioaddr + ChipConfig); + udelay(10); + + writew(1, ioaddr + PGSEL); + dspcfg = readw(ioaddr + DSPCFG); + writew(0, ioaddr + PGSEL); + if (np->dspcfg == dspcfg) + break; + } + + if (netif_msg_link(np)) { + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_INFO + "%s: DSPCFG mismatch after retrying for %d usec.\n", + dev->name, i*10); + } else { + printk(KERN_INFO + "%s: DSPCFG accepted after %d usec.\n", + dev->name, i*10); + } + } + /* + * Enable PHY Specific event based interrupts. Link state change + * and Auto-Negotiation Completion are among the affected. + * Read the intr status to clear it (needed for wake events). + */ + readw(ioaddr + MIntrStatus); + writew(MICRIntEn, ioaddr + MIntrCtrl); +} + +static int switch_port_external(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + u32 cfg; + + cfg = readl(ioaddr + ChipConfig); + if (cfg & CfgExtPhy) + return 0; + + if (netif_msg_link(np)) { + printk(KERN_INFO "%s: switching to external transceiver.\n", + dev->name); + } + + /* 1) switch back to external phy */ + writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig); + readl(ioaddr + ChipConfig); + udelay(1); + + /* 2) reset the external phy: */ + /* resetting the external PHY has been known to cause a hub supplying + * power over Ethernet to kill the power. We don't want to kill + * power to this computer, so we avoid resetting the phy. + */ + + /* 3) reinit the phy fixup, it got lost during power down. */ + move_int_phy(dev, np->phy_addr_external); + init_phy_fixup(dev); + + return 1; +} + +static int switch_port_internal(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + u32 cfg; + u16 bmcr; + + cfg = readl(ioaddr + ChipConfig); + if (!(cfg &CfgExtPhy)) + return 0; + + if (netif_msg_link(np)) { + printk(KERN_INFO "%s: switching to internal transceiver.\n", + dev->name); + } + /* 1) switch back to internal phy: */ + cfg = cfg & ~(CfgExtPhy | CfgPhyDis); + writel(cfg, ioaddr + ChipConfig); + readl(ioaddr + ChipConfig); + udelay(1); + + /* 2) reset the internal phy: */ + bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); + writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2)); + readl(ioaddr + ChipConfig); + udelay(10); + for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { + bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); + if (!(bmcr & BMCR_RESET)) + break; + udelay(10); + } + if (i==NATSEMI_HW_TIMEOUT && netif_msg_link(np)) { + printk(KERN_INFO + "%s: phy reset did not complete in %d usec.\n", + dev->name, i*10); + } + /* 3) reinit the phy fixup, it got lost during power down. */ + init_phy_fixup(dev); + + return 1; +} + +/* Scan for a PHY on the external mii bus. + * There are two tricky points: + * - Do not scan while the internal phy is enabled. The internal phy will + * crash: e.g. reads from the DSPCFG register will return odd values and + * the nasty random phy reset code will reset the nic every few seconds. + * - The internal phy must be moved around, an external phy could + * have the same address as the internal phy. + */ +static int find_mii(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int tmp; + int i; + int did_switch; + + /* Switch to external phy */ + did_switch = switch_port_external(dev); + + /* Scan the possible phy addresses: + * + * PHY address 0 means that the phy is in isolate mode. Not yet + * supported due to lack of test hardware. User space should + * handle it through ethtool. + */ + for (i = 1; i <= 31; i++) { + move_int_phy(dev, i); + tmp = miiport_read(dev, i, MII_BMSR); + if (tmp != 0xffff && tmp != 0x0000) { + /* found something! */ + np->mii = (mdio_read(dev, MII_PHYSID1) << 16) + + mdio_read(dev, MII_PHYSID2); + if (netif_msg_probe(np)) { + printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n", + pci_name(np->pci_dev), np->mii, i); + } + break; + } + } + /* And switch back to internal phy: */ + if (did_switch) + switch_port_internal(dev); + return i; +} + +/* CFG bits [13:16] [18:23] */ +#define CFG_RESET_SAVE 0xfde000 +/* WCSR bits [0:4] [9:10] */ +#define WCSR_RESET_SAVE 0x61f +/* RFCR bits [20] [22] [27:31] */ +#define RFCR_RESET_SAVE 0xf8500000 + +static void natsemi_reset(struct net_device *dev) +{ + int i; + u32 cfg; + u32 wcsr; + u32 rfcr; + u16 pmatch[3]; + u16 sopass[3]; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* + * Resetting the chip causes some registers to be lost. + * Natsemi suggests NOT reloading the EEPROM while live, so instead + * we save the state that would have been loaded from EEPROM + * on a normal power-up (see the spec EEPROM map). This assumes + * whoever calls this will follow up with init_registers() eventually. + */ + + /* CFG */ + cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE; + /* WCSR */ + wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE; + /* RFCR */ + rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE; + /* PMATCH */ + for (i = 0; i < 3; i++) { + writel(i*2, ioaddr + RxFilterAddr); + pmatch[i] = readw(ioaddr + RxFilterData); + } + /* SOPAS */ + for (i = 0; i < 3; i++) { + writel(0xa+(i*2), ioaddr + RxFilterAddr); + sopass[i] = readw(ioaddr + RxFilterData); + } + + /* now whack the chip */ + writel(ChipReset, ioaddr + ChipCmd); + for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { + if (!(readl(ioaddr + ChipCmd) & ChipReset)) + break; + udelay(5); + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "%s: reset did not complete in %d usec.\n", + dev->name, i*5); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "%s: reset completed in %d usec.\n", + dev->name, i*5); + } + + /* restore CFG */ + cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE; + /* turn on external phy if it was selected */ + if (dev->if_port == PORT_TP) + cfg &= ~(CfgExtPhy | CfgPhyDis); + else + cfg |= (CfgExtPhy | CfgPhyDis); + writel(cfg, ioaddr + ChipConfig); + /* restore WCSR */ + wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE; + writel(wcsr, ioaddr + WOLCmd); + /* read RFCR */ + rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE; + /* restore PMATCH */ + for (i = 0; i < 3; i++) { + writel(i*2, ioaddr + RxFilterAddr); + writew(pmatch[i], ioaddr + RxFilterData); + } + for (i = 0; i < 3; i++) { + writel(0xa+(i*2), ioaddr + RxFilterAddr); + writew(sopass[i], ioaddr + RxFilterData); + } + /* restore RFCR */ + writel(rfcr, ioaddr + RxFilterAddr); +} + +static void reset_rx(struct net_device *dev) +{ + int i; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + np->intr_status &= ~RxResetDone; + + writel(RxReset, ioaddr + ChipCmd); + + for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { + np->intr_status |= readl(ioaddr + IntrStatus); + if (np->intr_status & RxResetDone) + break; + udelay(15); + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n", + dev->name, i*15); + } else if (netif_msg_hw(np)) { + printk(KERN_WARNING "%s: RX reset took %d usec.\n", + dev->name, i*15); + } +} + +static void natsemi_reload_eeprom(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + + writel(EepromReload, ioaddr + PCIBusCfg); + for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { + udelay(50); + if (!(readl(ioaddr + PCIBusCfg) & EepromReload)) + break; + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n", + pci_name(np->pci_dev), i*50); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n", + pci_name(np->pci_dev), i*50); + } +} + +static void natsemi_stop_rxtx(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + int i; + + writel(RxOff | TxOff, ioaddr + ChipCmd); + for(i=0;i< NATSEMI_HW_TIMEOUT;i++) { + if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0) + break; + udelay(5); + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n", + dev->name, i*5); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n", + dev->name, i*5); + } +} + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + const int irq = np->pci_dev->irq; + int i; + + /* Reset the chip, just in case. */ + natsemi_reset(dev); + + i = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); + if (i) return i; + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, irq); + i = alloc_ring(dev); + if (i < 0) { + free_irq(irq, dev); + return i; + } + napi_enable(&np->napi); + + init_ring(dev); + spin_lock_irq(&np->lock); + init_registers(dev); + /* now set the MAC address according to dev->dev_addr */ + for (i = 0; i < 3; i++) { + u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i]; + + writel(i*2, ioaddr + RxFilterAddr); + writew(mac, ioaddr + RxFilterData); + } + writel(np->cur_rx_mode, ioaddr + RxFilterAddr); + spin_unlock_irq(&np->lock); + + netif_start_queue(dev); + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n", + dev->name, (int)readl(ioaddr + ChipCmd)); + + /* Set the timer to check for link beat. */ + timer_setup(&np->timer, netdev_timer, 0); + np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ); + add_timer(&np->timer); + + return 0; +} + +static void do_cable_magic(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + if (dev->if_port != PORT_TP) + return; + + if (np->srr >= SRR_DP83816_A5) + return; + + /* + * 100 MBit links with short cables can trip an issue with the chip. + * The problem manifests as lots of CRC errors and/or flickering + * activity LED while idle. This process is based on instructions + * from engineers at National. + */ + if (readl(ioaddr + ChipConfig) & CfgSpeed100) { + u16 data; + + writew(1, ioaddr + PGSEL); + /* + * coefficient visibility should already be enabled via + * DSPCFG | 0x1000 + */ + data = readw(ioaddr + TSTDAT) & 0xff; + /* + * the value must be negative, and within certain values + * (these values all come from National) + */ + if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) { + np = netdev_priv(dev); + + /* the bug has been triggered - fix the coefficient */ + writew(TSTDAT_FIXED, ioaddr + TSTDAT); + /* lock the value */ + data = readw(ioaddr + DSPCFG); + np->dspcfg = data | DSPCFG_LOCK; + writew(np->dspcfg, ioaddr + DSPCFG); + } + writew(0, ioaddr + PGSEL); + } +} + +static void undo_cable_magic(struct net_device *dev) +{ + u16 data; + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + if (dev->if_port != PORT_TP) + return; + + if (np->srr >= SRR_DP83816_A5) + return; + + writew(1, ioaddr + PGSEL); + /* make sure the lock bit is clear */ + data = readw(ioaddr + DSPCFG); + np->dspcfg = data & ~DSPCFG_LOCK; + writew(np->dspcfg, ioaddr + DSPCFG); + writew(0, ioaddr + PGSEL); +} + +static void check_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + int duplex = np->duplex; + u16 bmsr; + + /* If we are ignoring the PHY then don't try reading it. */ + if (np->ignore_phy) + goto propagate_state; + + /* The link status field is latched: it remains low after a temporary + * link failure until it's read. We need the current link status, + * thus read twice. + */ + mdio_read(dev, MII_BMSR); + bmsr = mdio_read(dev, MII_BMSR); + + if (!(bmsr & BMSR_LSTATUS)) { + if (netif_carrier_ok(dev)) { + if (netif_msg_link(np)) + printk(KERN_NOTICE "%s: link down.\n", + dev->name); + netif_carrier_off(dev); + undo_cable_magic(dev); + } + return; + } + if (!netif_carrier_ok(dev)) { + if (netif_msg_link(np)) + printk(KERN_NOTICE "%s: link up.\n", dev->name); + netif_carrier_on(dev); + do_cable_magic(dev); + } + + duplex = np->full_duplex; + if (!duplex) { + if (bmsr & BMSR_ANEGCOMPLETE) { + int tmp = mii_nway_result( + np->advertising & mdio_read(dev, MII_LPA)); + if (tmp == LPA_100FULL || tmp == LPA_10FULL) + duplex = 1; + } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX) + duplex = 1; + } + +propagate_state: + /* if duplex is set then bit 28 must be set, too */ + if (duplex ^ !!(np->rx_config & RxAcceptTx)) { + if (netif_msg_link(np)) + printk(KERN_INFO + "%s: Setting %s-duplex based on negotiated " + "link capability.\n", dev->name, + duplex ? "full" : "half"); + if (duplex) { + np->rx_config |= RxAcceptTx; + np->tx_config |= TxCarrierIgn | TxHeartIgn; + } else { + np->rx_config &= ~RxAcceptTx; + np->tx_config &= ~(TxCarrierIgn | TxHeartIgn); + } + writel(np->tx_config, ioaddr + TxConfig); + writel(np->rx_config, ioaddr + RxConfig); + } +} + +static void init_registers(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + init_phy_fixup(dev); + + /* clear any interrupts that are pending, such as wake events */ + readl(ioaddr + IntrStatus); + + writel(np->ring_dma, ioaddr + RxRingPtr); + writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc), + ioaddr + TxRingPtr); + + /* Initialize other registers. + * Configure the PCI bus bursts and FIFO thresholds. + * Configure for standard, in-spec Ethernet. + * Start with half-duplex. check_link will update + * to the correct settings. + */ + + /* DRTH: 2: start tx if 64 bytes are in the fifo + * FLTH: 0x10: refill with next packet if 512 bytes are free + * MXDMA: 0: up to 256 byte bursts. + * MXDMA must be <= FLTH + * ECRETRY=1 + * ATP=1 + */ + np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | + TX_FLTH_VAL | TX_DRTH_VAL_START; + writel(np->tx_config, ioaddr + TxConfig); + + /* DRTH 0x10: start copying to memory if 128 bytes are in the fifo + * MXDMA 0: up to 256 byte bursts + */ + np->rx_config = RxMxdma_256 | RX_DRTH_VAL; + /* if receive ring now has bigger buffers than normal, enable jumbo */ + if (np->rx_buf_sz > NATSEMI_LONGPKT) + np->rx_config |= RxAcceptLong; + + writel(np->rx_config, ioaddr + RxConfig); + + /* Disable PME: + * The PME bit is initialized from the EEPROM contents. + * PCI cards probably have PME disabled, but motherboard + * implementations may have PME set to enable WakeOnLan. + * With PME set the chip will scan incoming packets but + * nothing will be written to memory. */ + np->SavedClkRun = readl(ioaddr + ClkRun); + writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun); + if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) { + printk(KERN_NOTICE "%s: Wake-up event %#08x\n", + dev->name, readl(ioaddr + WOLCmd)); + } + + check_link(dev); + __set_rx_mode(dev); + + /* Enable interrupts by setting the interrupt mask. */ + writel(DEFAULT_INTR, ioaddr + IntrMask); + natsemi_irq_enable(dev); + + writel(RxOn | TxOn, ioaddr + ChipCmd); + writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */ +} + +/* + * netdev_timer: + * Purpose: + * 1) check for link changes. Usually they are handled by the MII interrupt + * but it doesn't hurt to check twice. + * 2) check for sudden death of the NIC: + * It seems that a reference set for this chip went out with incorrect info, + * and there exist boards that aren't quite right. An unexpected voltage + * drop can cause the PHY to get itself in a weird state (basically reset). + * NOTE: this only seems to affect revC chips. The user can disable + * this check via dspcfg_workaround sysfs option. + * 3) check of death of the RX path due to OOM + */ +static void netdev_timer(struct timer_list *t) +{ + struct netdev_private *np = from_timer(np, t, timer); + struct net_device *dev = np->dev; + void __iomem * ioaddr = ns_ioaddr(dev); + int next_tick = NATSEMI_TIMER_FREQ; + const int irq = np->pci_dev->irq; + + if (netif_msg_timer(np)) { + /* DO NOT read the IntrStatus register, + * a read clears any pending interrupts. + */ + printk(KERN_DEBUG "%s: Media selection timer tick.\n", + dev->name); + } + + if (dev->if_port == PORT_TP) { + u16 dspcfg; + + spin_lock_irq(&np->lock); + /* check for a nasty random phy-reset - use dspcfg as a flag */ + writew(1, ioaddr+PGSEL); + dspcfg = readw(ioaddr+DSPCFG); + writew(0, ioaddr+PGSEL); + if (np->dspcfg_workaround && dspcfg != np->dspcfg) { + if (!netif_queue_stopped(dev)) { + spin_unlock_irq(&np->lock); + if (netif_msg_drv(np)) + printk(KERN_NOTICE "%s: possible phy reset: " + "re-initializing\n", dev->name); + disable_irq(irq); + spin_lock_irq(&np->lock); + natsemi_stop_rxtx(dev); + dump_ring(dev); + reinit_ring(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + enable_irq(irq); + } else { + /* hurry back */ + next_tick = HZ; + spin_unlock_irq(&np->lock); + } + } else { + /* init_registers() calls check_link() for the above case */ + check_link(dev); + spin_unlock_irq(&np->lock); + } + } else { + spin_lock_irq(&np->lock); + check_link(dev); + spin_unlock_irq(&np->lock); + } + if (np->oom) { + disable_irq(irq); + np->oom = 0; + refill_rx(dev); + enable_irq(irq); + if (!np->oom) { + writel(RxOn, ioaddr + ChipCmd); + } else { + next_tick = 1; + } + } + + if (next_tick > 1) + mod_timer(&np->timer, round_jiffies(jiffies + next_tick)); + else + mod_timer(&np->timer, jiffies + next_tick); +} + +static void dump_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + if (netif_msg_pktdata(np)) { + int i; + printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", + i, np->tx_ring[i].next_desc, + np->tx_ring[i].cmd_status, + np->tx_ring[i].addr); + } + printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", + i, np->rx_ring[i].next_desc, + np->rx_ring[i].cmd_status, + np->rx_ring[i].addr); + } + } +} + +static void ns_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + const int irq = np->pci_dev->irq; + + disable_irq(irq); + spin_lock_irq(&np->lock); + if (!np->hands_off) { + if (netif_msg_tx_err(np)) + printk(KERN_WARNING + "%s: Transmit timed out, status %#08x," + " resetting...\n", + dev->name, readl(ioaddr + IntrStatus)); + dump_ring(dev); + + natsemi_reset(dev); + reinit_ring(dev); + init_registers(dev); + } else { + printk(KERN_WARNING + "%s: tx_timeout while in hands_off state?\n", + dev->name); + } + spin_unlock_irq(&np->lock); + enable_irq(irq); + + netif_trans_update(dev); /* prevent tx timeout */ + dev->stats.tx_errors++; + netif_wake_queue(dev); +} + +static int alloc_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + np->rx_ring = dma_alloc_coherent(&np->pci_dev->dev, + sizeof(struct netdev_desc) * (RX_RING_SIZE + TX_RING_SIZE), + &np->ring_dma, GFP_KERNEL); + if (!np->rx_ring) + return -ENOMEM; + np->tx_ring = &np->rx_ring[RX_RING_SIZE]; + return 0; +} + +static void refill_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + int entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING; + skb = netdev_alloc_skb(dev, buflen); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + np->rx_dma[entry] = dma_map_single(&np->pci_dev->dev, + skb->data, buflen, + DMA_FROM_DEVICE); + if (dma_mapping_error(&np->pci_dev->dev, np->rx_dma[entry])) { + dev_kfree_skb_any(skb); + np->rx_skbuff[entry] = NULL; + break; /* Better luck next round. */ + } + np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]); + } + np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz); + } + if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) { + if (netif_msg_rx_err(np)) + printk(KERN_WARNING "%s: going OOM.\n", dev->name); + np->oom = 1; + } +} + +static void set_bufsize(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + if (dev->mtu <= ETH_DATA_LEN) + np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS; + else + np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS; +} + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* 1) TX ring */ + np->dirty_tx = np->cur_tx = 0; + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma + +sizeof(struct netdev_desc) + *((i+1)%TX_RING_SIZE+RX_RING_SIZE)); + np->tx_ring[i].cmd_status = 0; + } + + /* 2) RX ring */ + np->dirty_rx = 0; + np->cur_rx = RX_RING_SIZE; + np->oom = 0; + set_bufsize(dev); + + np->rx_head_desc = &np->rx_ring[0]; + + /* Please be careful before changing this loop - at least gcc-2.95.1 + * miscompiles it otherwise. + */ + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma + +sizeof(struct netdev_desc) + *((i+1)%RX_RING_SIZE)); + np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); + np->rx_skbuff[i] = NULL; + } + refill_rx(dev); + dump_ring(dev); +} + +static void drain_tx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) { + dma_unmap_single(&np->pci_dev->dev, np->tx_dma[i], + np->tx_skbuff[i]->len, DMA_TO_DEVICE); + dev_kfree_skb(np->tx_skbuff[i]); + dev->stats.tx_dropped++; + } + np->tx_skbuff[i] = NULL; + } +} + +static void drain_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + unsigned int buflen = np->rx_buf_sz; + int i; + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].cmd_status = 0; + np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ + if (np->rx_skbuff[i]) { + dma_unmap_single(&np->pci_dev->dev, np->rx_dma[i], + buflen + NATSEMI_PADDING, + DMA_FROM_DEVICE); + dev_kfree_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = NULL; + } +} + +static void drain_ring(struct net_device *dev) +{ + drain_rx(dev); + drain_tx(dev); +} + +static void free_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + dma_free_coherent(&np->pci_dev->dev, + sizeof(struct netdev_desc) * (RX_RING_SIZE + TX_RING_SIZE), + np->rx_ring, np->ring_dma); +} + +static void reinit_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* RX Ring */ + np->dirty_rx = 0; + np->cur_rx = RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[0]; + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) + np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); + + refill_rx(dev); +} + +static void reinit_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* drain TX ring */ + drain_tx(dev); + np->dirty_tx = np->cur_tx = 0; + for (i=0;i<TX_RING_SIZE;i++) + np->tx_ring[i].cmd_status = 0; + + reinit_rx(dev); +} + +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + unsigned entry; + unsigned long flags; + + /* Note: Ordering is important here, set the field with the + "ownership" bit last, and only then increment cur_tx. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + + np->tx_skbuff[entry] = skb; + np->tx_dma[entry] = dma_map_single(&np->pci_dev->dev, skb->data, + skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&np->pci_dev->dev, np->tx_dma[entry])) { + np->tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]); + + spin_lock_irqsave(&np->lock, flags); + + if (!np->hands_off) { + np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len); + /* StrongARM: Explicitly cache flush np->tx_ring and + * skb->data,skb->len. */ + wmb(); + np->cur_tx++; + if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) { + netdev_tx_done(dev); + if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) + netif_stop_queue(dev); + } + /* Wake the potentially-idle transmit channel. */ + writel(TxOn, ioaddr + ChipCmd); + } else { + dev_kfree_skb_irq(skb); + dev->stats.tx_dropped++; + } + spin_unlock_irqrestore(&np->lock, flags); + + if (netif_msg_tx_queued(np)) { + printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", + dev->name, np->cur_tx, entry); + } + return NETDEV_TX_OK; +} + +static void netdev_tx_done(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn)) + break; + if (netif_msg_tx_done(np)) + printk(KERN_DEBUG + "%s: tx frame #%d finished, status %#08x.\n", + dev->name, np->dirty_tx, + le32_to_cpu(np->tx_ring[entry].cmd_status)); + if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) { + dev->stats.tx_packets++; + dev->stats.tx_bytes += np->tx_skbuff[entry]->len; + } else { /* Various Tx errors */ + int tx_status = + le32_to_cpu(np->tx_ring[entry].cmd_status); + if (tx_status & (DescTxAbort|DescTxExcColl)) + dev->stats.tx_aborted_errors++; + if (tx_status & DescTxFIFO) + dev->stats.tx_fifo_errors++; + if (tx_status & DescTxCarrier) + dev->stats.tx_carrier_errors++; + if (tx_status & DescTxOOWCol) + dev->stats.tx_window_errors++; + dev->stats.tx_errors++; + } + dma_unmap_single(&np->pci_dev->dev, np->tx_dma[entry], + np->tx_skbuff[entry]->len, DMA_TO_DEVICE); + /* Free the original skb. */ + dev_consume_skb_irq(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + } + if (netif_queue_stopped(dev) && + np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { + /* The ring is no longer full, wake queue. */ + netif_wake_queue(dev); + } +} + +/* The interrupt handler doesn't actually handle interrupts itself, it + * schedules a NAPI poll if there is anything to do. */ +static irqreturn_t intr_handler(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + /* Reading IntrStatus automatically acknowledges so don't do + * that while interrupts are disabled, (for example, while a + * poll is scheduled). */ + if (np->hands_off || !readl(ioaddr + IntrEnable)) + return IRQ_NONE; + + np->intr_status = readl(ioaddr + IntrStatus); + + if (!np->intr_status) + return IRQ_NONE; + + if (netif_msg_intr(np)) + printk(KERN_DEBUG + "%s: Interrupt, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); + + if (napi_schedule_prep(&np->napi)) { + /* Disable interrupts and register for poll */ + natsemi_irq_disable(dev); + __napi_schedule(&np->napi); + } else + printk(KERN_WARNING + "%s: Ignoring interrupt, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + return IRQ_HANDLED; +} + +/* This is the NAPI poll routine. As well as the standard RX handling + * it also handles all other interrupts that the chip might raise. + */ +static int natsemi_poll(struct napi_struct *napi, int budget) +{ + struct netdev_private *np = container_of(napi, struct netdev_private, napi); + struct net_device *dev = np->dev; + void __iomem * ioaddr = ns_ioaddr(dev); + int work_done = 0; + + do { + if (netif_msg_intr(np)) + printk(KERN_DEBUG + "%s: Poll, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + /* netdev_rx() may read IntrStatus again if the RX state + * machine falls over so do it first. */ + if (np->intr_status & + (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | + IntrRxErr | IntrRxOverrun)) { + netdev_rx(dev, &work_done, budget); + } + + if (np->intr_status & + (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) { + spin_lock(&np->lock); + netdev_tx_done(dev); + spin_unlock(&np->lock); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (np->intr_status & IntrAbnormalSummary) + netdev_error(dev, np->intr_status); + + if (work_done >= budget) + return work_done; + + np->intr_status = readl(ioaddr + IntrStatus); + } while (np->intr_status); + + napi_complete_done(napi, work_done); + + /* Reenable interrupts providing nothing is trying to shut + * the chip down. */ + spin_lock(&np->lock); + if (!np->hands_off) + natsemi_irq_enable(dev); + spin_unlock(&np->lock); + + return work_done; +} + +/* This routine is logically part of the interrupt handler, but separated + for clarity and better register allocation. */ +static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); + unsigned int buflen = np->rx_buf_sz; + void __iomem * ioaddr = ns_ioaddr(dev); + + /* If the driver owns the next entry it's a new packet. Send it up. */ + while (desc_status < 0) { /* e.g. & DescOwn */ + int pkt_len; + if (netif_msg_rx_status(np)) + printk(KERN_DEBUG + " netdev_rx() entry %d status was %#08x.\n", + entry, desc_status); + if (--boguscnt < 0) + break; + + if (*work_done >= work_to_do) + break; + + (*work_done)++; + + pkt_len = (desc_status & DescSizeMask) - 4; + if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){ + if (desc_status & DescMore) { + unsigned long flags; + + if (netif_msg_rx_err(np)) + printk(KERN_WARNING + "%s: Oversized(?) Ethernet " + "frame spanned multiple " + "buffers, entry %#08x " + "status %#08x.\n", dev->name, + np->cur_rx, desc_status); + dev->stats.rx_length_errors++; + + /* The RX state machine has probably + * locked up beneath us. Follow the + * reset procedure documented in + * AN-1287. */ + + spin_lock_irqsave(&np->lock, flags); + reset_rx(dev); + reinit_rx(dev); + writel(np->ring_dma, ioaddr + RxRingPtr); + check_link(dev); + spin_unlock_irqrestore(&np->lock, flags); + + /* We'll enable RX on exit from this + * function. */ + break; + + } else { + /* There was an error. */ + dev->stats.rx_errors++; + if (desc_status & (DescRxAbort|DescRxOver)) + dev->stats.rx_over_errors++; + if (desc_status & (DescRxLong|DescRxRunt)) + dev->stats.rx_length_errors++; + if (desc_status & (DescRxInvalid|DescRxAlign)) + dev->stats.rx_frame_errors++; + if (desc_status & DescRxCRC) + dev->stats.rx_crc_errors++; + } + } else if (pkt_len > np->rx_buf_sz) { + /* if this is the tail of a double buffer + * packet, we've already counted the error + * on the first part. Ignore the second half. + */ + } else { + struct sk_buff *skb; + /* Omit CRC size. */ + /* Check if the packet is long enough to accept + * without copying to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = netdev_alloc_skb(dev, pkt_len + RX_OFFSET)) != NULL) { + /* 16 byte align the IP header */ + skb_reserve(skb, RX_OFFSET); + dma_sync_single_for_cpu(&np->pci_dev->dev, + np->rx_dma[entry], + buflen, + DMA_FROM_DEVICE); + skb_copy_to_linear_data(skb, + np->rx_skbuff[entry]->data, pkt_len); + skb_put(skb, pkt_len); + dma_sync_single_for_device(&np->pci_dev->dev, + np->rx_dma[entry], + buflen, + DMA_FROM_DEVICE); + } else { + dma_unmap_single(&np->pci_dev->dev, + np->rx_dma[entry], + buflen + NATSEMI_PADDING, + DMA_FROM_DEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } + skb->protocol = eth_type_trans(skb, dev); + netif_receive_skb(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); + } + refill_rx(dev); + + /* Restart Rx engine if stopped. */ + if (np->oom) + mod_timer(&np->timer, jiffies + 1); + else + writel(RxOn, ioaddr + ChipCmd); +} + +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + spin_lock(&np->lock); + if (intr_status & LinkChange) { + u16 lpa = mdio_read(dev, MII_LPA); + if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE && + netif_msg_link(np)) { + printk(KERN_INFO + "%s: Autonegotiation advertising" + " %#04x partner %#04x.\n", dev->name, + np->advertising, lpa); + } + + /* read MII int status to clear the flag */ + readw(ioaddr + MIntrStatus); + check_link(dev); + } + if (intr_status & StatsMax) { + __get_stats(dev); + } + if (intr_status & IntrTxUnderrun) { + if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) { + np->tx_config += TX_DRTH_VAL_INC; + if (netif_msg_tx_err(np)) + printk(KERN_NOTICE + "%s: increased tx threshold, txcfg %#08x.\n", + dev->name, np->tx_config); + } else { + if (netif_msg_tx_err(np)) + printk(KERN_NOTICE + "%s: tx underrun with maximum tx threshold, txcfg %#08x.\n", + dev->name, np->tx_config); + } + writel(np->tx_config, ioaddr + TxConfig); + } + if (intr_status & WOLPkt && netif_msg_wol(np)) { + int wol_status = readl(ioaddr + WOLCmd); + printk(KERN_NOTICE "%s: Link wake-up event %#08x\n", + dev->name, wol_status); + } + if (intr_status & RxStatusFIFOOver) { + if (netif_msg_rx_err(np) && netif_msg_intr(np)) { + printk(KERN_NOTICE "%s: Rx status FIFO overrun\n", + dev->name); + } + dev->stats.rx_fifo_errors++; + dev->stats.rx_errors++; + } + /* Hmmmmm, it's not clear how to recover from PCI faults. */ + if (intr_status & IntrPCIErr) { + printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name, + intr_status & IntrPCIErr); + dev->stats.tx_fifo_errors++; + dev->stats.tx_errors++; + dev->stats.rx_fifo_errors++; + dev->stats.rx_errors++; + } + spin_unlock(&np->lock); +} + +static void __get_stats(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + + /* The chip only need report frame silently dropped. */ + dev->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs); + dev->stats.rx_missed_errors += readl(ioaddr + RxMissed); +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + /* The chip only need report frame silently dropped. */ + spin_lock_irq(&np->lock); + if (netif_running(dev) && !np->hands_off) + __get_stats(dev); + spin_unlock_irq(&np->lock); + + return &dev->stats; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void natsemi_poll_controller(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + const int irq = np->pci_dev->irq; + + disable_irq(irq); + intr_handler(irq, dev); + enable_irq(irq); +} +#endif + +#define HASH_TABLE 0x200 +static void __set_rx_mode(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + u8 mc_filter[64]; /* Multicast hash filter */ + u32 rx_mode; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptAllMulticast | AcceptMyPhys; + } else { + struct netdev_hw_addr *ha; + int i; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + int b = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x1ff; + mc_filter[b/8] |= (1 << (b & 0x07)); + } + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptMulticast | AcceptMyPhys; + for (i = 0; i < 64; i += 2) { + writel(HASH_TABLE + i, ioaddr + RxFilterAddr); + writel((mc_filter[i + 1] << 8) + mc_filter[i], + ioaddr + RxFilterData); + } + } + writel(rx_mode, ioaddr + RxFilterAddr); + np->cur_rx_mode = rx_mode; +} + +static int natsemi_change_mtu(struct net_device *dev, int new_mtu) +{ + dev->mtu = new_mtu; + + /* synchronized against open : rtnl_lock() held by caller */ + if (netif_running(dev)) { + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + const int irq = np->pci_dev->irq; + + disable_irq(irq); + spin_lock(&np->lock); + /* stop engines */ + natsemi_stop_rxtx(dev); + /* drain rx queue */ + drain_rx(dev); + /* change buffers */ + set_bufsize(dev); + reinit_rx(dev); + writel(np->ring_dma, ioaddr + RxRingPtr); + /* restart engines */ + writel(RxOn | TxOn, ioaddr + ChipCmd); + spin_unlock(&np->lock); + enable_irq(irq); + } + return 0; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + if (!np->hands_off) + __set_rx_mode(dev); + spin_unlock_irq(&np->lock); +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); +} + +static int get_regs_len(struct net_device *dev) +{ + return NATSEMI_REGS_SIZE; +} + +static int get_eeprom_len(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->eeprom_size; +} + +static int get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + netdev_get_ecmd(dev, ecmd); + spin_unlock_irq(&np->lock); + return 0; +} + +static int set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + res = netdev_set_ecmd(dev, ecmd); + spin_unlock_irq(&np->lock); + return res; +} + +static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + netdev_get_wol(dev, &wol->supported, &wol->wolopts); + netdev_get_sopass(dev, wol->sopass); + spin_unlock_irq(&np->lock); +} + +static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + netdev_set_wol(dev, wol->wolopts); + res = netdev_set_sopass(dev, wol->sopass); + spin_unlock_irq(&np->lock); + return res; +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) +{ + struct netdev_private *np = netdev_priv(dev); + regs->version = NATSEMI_REGS_VER; + spin_lock_irq(&np->lock); + netdev_get_regs(dev, buf); + spin_unlock_irq(&np->lock); +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct netdev_private *np = netdev_priv(dev); + np->msg_enable = val; +} + +static int nway_reset(struct net_device *dev) +{ + int tmp; + int r = -EINVAL; + /* if autoneg is off, it's an error */ + tmp = mdio_read(dev, MII_BMCR); + if (tmp & BMCR_ANENABLE) { + tmp |= (BMCR_ANRESTART); + mdio_write(dev, MII_BMCR, tmp); + r = 0; + } + return r; +} + +static u32 get_link(struct net_device *dev) +{ + /* LSTATUS is latched low until a read - so read twice */ + mdio_read(dev, MII_BMSR); + return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0; +} + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) +{ + struct netdev_private *np = netdev_priv(dev); + u8 *eebuf; + int res; + + eebuf = kmalloc(np->eeprom_size, GFP_KERNEL); + if (!eebuf) + return -ENOMEM; + + eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16); + spin_lock_irq(&np->lock); + res = netdev_get_eeprom(dev, eebuf); + spin_unlock_irq(&np->lock); + if (!res) + memcpy(data, eebuf+eeprom->offset, eeprom->len); + kfree(eebuf); + return res; +} + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = get_drvinfo, + .get_regs_len = get_regs_len, + .get_eeprom_len = get_eeprom_len, + .get_wol = get_wol, + .set_wol = set_wol, + .get_regs = get_regs, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .nway_reset = nway_reset, + .get_link = get_link, + .get_eeprom = get_eeprom, + .get_link_ksettings = get_link_ksettings, + .set_link_ksettings = set_link_ksettings, +}; + +static int netdev_set_wol(struct net_device *dev, u32 newval) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary; + + /* translate to bitmasks this chip understands */ + if (newval & WAKE_PHY) + data |= WakePhy; + if (newval & WAKE_UCAST) + data |= WakeUnicast; + if (newval & WAKE_MCAST) + data |= WakeMulticast; + if (newval & WAKE_BCAST) + data |= WakeBroadcast; + if (newval & WAKE_ARP) + data |= WakeArp; + if (newval & WAKE_MAGIC) + data |= WakeMagic; + if (np->srr >= SRR_DP83815_D) { + if (newval & WAKE_MAGICSECURE) { + data |= WakeMagicSecure; + } + } + + writel(data, ioaddr + WOLCmd); + + return 0; +} + +static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u32 regval = readl(ioaddr + WOLCmd); + + *supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST + | WAKE_ARP | WAKE_MAGIC); + + if (np->srr >= SRR_DP83815_D) { + /* SOPASS works on revD and higher */ + *supported |= WAKE_MAGICSECURE; + } + *cur = 0; + + /* translate from chip bitmasks */ + if (regval & WakePhy) + *cur |= WAKE_PHY; + if (regval & WakeUnicast) + *cur |= WAKE_UCAST; + if (regval & WakeMulticast) + *cur |= WAKE_MCAST; + if (regval & WakeBroadcast) + *cur |= WAKE_BCAST; + if (regval & WakeArp) + *cur |= WAKE_ARP; + if (regval & WakeMagic) + *cur |= WAKE_MAGIC; + if (regval & WakeMagicSecure) { + /* this can be on in revC, but it's broken */ + *cur |= WAKE_MAGICSECURE; + } + + return 0; +} + +static int netdev_set_sopass(struct net_device *dev, u8 *newval) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u16 *sval = (u16 *)newval; + u32 addr; + + if (np->srr < SRR_DP83815_D) { + return 0; + } + + /* enable writing to these registers by disabling the RX filter */ + addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; + addr &= ~RxFilterEnable; + writel(addr, ioaddr + RxFilterAddr); + + /* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */ + writel(addr | 0xa, ioaddr + RxFilterAddr); + writew(sval[0], ioaddr + RxFilterData); + + writel(addr | 0xc, ioaddr + RxFilterAddr); + writew(sval[1], ioaddr + RxFilterData); + + writel(addr | 0xe, ioaddr + RxFilterAddr); + writew(sval[2], ioaddr + RxFilterData); + + /* re-enable the RX filter */ + writel(addr | RxFilterEnable, ioaddr + RxFilterAddr); + + return 0; +} + +static int netdev_get_sopass(struct net_device *dev, u8 *data) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u16 *sval = (u16 *)data; + u32 addr; + + if (np->srr < SRR_DP83815_D) { + sval[0] = sval[1] = sval[2] = 0; + return 0; + } + + /* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */ + addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; + + writel(addr | 0xa, ioaddr + RxFilterAddr); + sval[0] = readw(ioaddr + RxFilterData); + + writel(addr | 0xc, ioaddr + RxFilterAddr); + sval[1] = readw(ioaddr + RxFilterData); + + writel(addr | 0xe, ioaddr + RxFilterAddr); + sval[2] = readw(ioaddr + RxFilterData); + + writel(addr, ioaddr + RxFilterAddr); + + return 0; +} + +static int netdev_get_ecmd(struct net_device *dev, + struct ethtool_link_ksettings *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + u32 supported, advertising; + u32 tmp; + + ecmd->base.port = dev->if_port; + ecmd->base.speed = np->speed; + ecmd->base.duplex = np->duplex; + ecmd->base.autoneg = np->autoneg; + advertising = 0; + + if (np->advertising & ADVERTISE_10HALF) + advertising |= ADVERTISED_10baseT_Half; + if (np->advertising & ADVERTISE_10FULL) + advertising |= ADVERTISED_10baseT_Full; + if (np->advertising & ADVERTISE_100HALF) + advertising |= ADVERTISED_100baseT_Half; + if (np->advertising & ADVERTISE_100FULL) + advertising |= ADVERTISED_100baseT_Full; + supported = (SUPPORTED_Autoneg | + SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE); + ecmd->base.phy_address = np->phy_addr_external; + /* + * We intentionally report the phy address of the external + * phy, even if the internal phy is used. This is necessary + * to work around a deficiency of the ethtool interface: + * It's only possible to query the settings of the active + * port. Therefore + * # ethtool -s ethX port mii + * actually sends an ioctl to switch to port mii with the + * settings that are used for the current active port. + * If we would report a different phy address in this + * command, then + * # ethtool -s ethX port tp;ethtool -s ethX port mii + * would unintentionally change the phy address. + * + * Fortunately the phy address doesn't matter with the + * internal phy... + */ + + /* set information based on active port type */ + switch (ecmd->base.port) { + default: + case PORT_TP: + advertising |= ADVERTISED_TP; + break; + case PORT_MII: + advertising |= ADVERTISED_MII; + break; + case PORT_FIBRE: + advertising |= ADVERTISED_FIBRE; + break; + } + + /* if autonegotiation is on, try to return the active speed/duplex */ + if (ecmd->base.autoneg == AUTONEG_ENABLE) { + advertising |= ADVERTISED_Autoneg; + tmp = mii_nway_result( + np->advertising & mdio_read(dev, MII_LPA)); + if (tmp == LPA_100FULL || tmp == LPA_100HALF) + ecmd->base.speed = SPEED_100; + else + ecmd->base.speed = SPEED_10; + if (tmp == LPA_100FULL || tmp == LPA_10FULL) + ecmd->base.duplex = DUPLEX_FULL; + else + ecmd->base.duplex = DUPLEX_HALF; + } + + /* ignore maxtxpkt, maxrxpkt for now */ + + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising, + advertising); + + return 0; +} + +static int netdev_set_ecmd(struct net_device *dev, + const struct ethtool_link_ksettings *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + u32 advertising; + + ethtool_convert_link_mode_to_legacy_u32(&advertising, + ecmd->link_modes.advertising); + + if (ecmd->base.port != PORT_TP && + ecmd->base.port != PORT_MII && + ecmd->base.port != PORT_FIBRE) + return -EINVAL; + if (ecmd->base.autoneg == AUTONEG_ENABLE) { + if ((advertising & (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full)) == 0) { + return -EINVAL; + } + } else if (ecmd->base.autoneg == AUTONEG_DISABLE) { + u32 speed = ecmd->base.speed; + if (speed != SPEED_10 && speed != SPEED_100) + return -EINVAL; + if (ecmd->base.duplex != DUPLEX_HALF && + ecmd->base.duplex != DUPLEX_FULL) + return -EINVAL; + } else { + return -EINVAL; + } + + /* + * If we're ignoring the PHY then autoneg and the internal + * transceiver are really not going to work so don't let the + * user select them. + */ + if (np->ignore_phy && (ecmd->base.autoneg == AUTONEG_ENABLE || + ecmd->base.port == PORT_TP)) + return -EINVAL; + + /* + * maxtxpkt, maxrxpkt: ignored for now. + * + * transceiver: + * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always + * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and + * selects based on ecmd->port. + * + * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre + * phys that are connected to the mii bus. It's used to apply fibre + * specific updates. + */ + + /* WHEW! now lets bang some bits */ + + /* save the parms */ + dev->if_port = ecmd->base.port; + np->autoneg = ecmd->base.autoneg; + np->phy_addr_external = ecmd->base.phy_address & PhyAddrMask; + if (np->autoneg == AUTONEG_ENABLE) { + /* advertise only what has been requested */ + np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertising & ADVERTISED_10baseT_Half) + np->advertising |= ADVERTISE_10HALF; + if (advertising & ADVERTISED_10baseT_Full) + np->advertising |= ADVERTISE_10FULL; + if (advertising & ADVERTISED_100baseT_Half) + np->advertising |= ADVERTISE_100HALF; + if (advertising & ADVERTISED_100baseT_Full) + np->advertising |= ADVERTISE_100FULL; + } else { + np->speed = ecmd->base.speed; + np->duplex = ecmd->base.duplex; + /* user overriding the initial full duplex parm? */ + if (np->duplex == DUPLEX_HALF) + np->full_duplex = 0; + } + + /* get the right phy enabled */ + if (ecmd->base.port == PORT_TP) + switch_port_internal(dev); + else + switch_port_external(dev); + + /* set parms and see how this affected our link status */ + init_phy_fixup(dev); + check_link(dev); + return 0; +} + +static int netdev_get_regs(struct net_device *dev, u8 *buf) +{ + int i; + int j; + u32 rfcr; + u32 *rbuf = (u32 *)buf; + void __iomem * ioaddr = ns_ioaddr(dev); + + /* read non-mii page 0 of registers */ + for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) { + rbuf[i] = readl(ioaddr + i*4); + } + + /* read current mii registers */ + for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++) + rbuf[i] = mdio_read(dev, i & 0x1f); + + /* read only the 'magic' registers from page 1 */ + writew(1, ioaddr + PGSEL); + rbuf[i++] = readw(ioaddr + PMDCSR); + rbuf[i++] = readw(ioaddr + TSTDAT); + rbuf[i++] = readw(ioaddr + DSPCFG); + rbuf[i++] = readw(ioaddr + SDCFG); + writew(0, ioaddr + PGSEL); + + /* read RFCR indexed registers */ + rfcr = readl(ioaddr + RxFilterAddr); + for (j = 0; j < NATSEMI_RFDR_NREGS; j++) { + writel(j*2, ioaddr + RxFilterAddr); + rbuf[i++] = readw(ioaddr + RxFilterData); + } + writel(rfcr, ioaddr + RxFilterAddr); + + /* the interrupt status is clear-on-read - see if we missed any */ + if (rbuf[4] & rbuf[5]) { + printk(KERN_WARNING + "%s: shoot, we dropped an interrupt (%#08x)\n", + dev->name, rbuf[4] & rbuf[5]); + } + + return 0; +} + +#define SWAP_BITS(x) ( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \ + | (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9) \ + | (((x) & 0x0010) << 7) | (((x) & 0x0020) << 5) \ + | (((x) & 0x0040) << 3) | (((x) & 0x0080) << 1) \ + | (((x) & 0x0100) >> 1) | (((x) & 0x0200) >> 3) \ + | (((x) & 0x0400) >> 5) | (((x) & 0x0800) >> 7) \ + | (((x) & 0x1000) >> 9) | (((x) & 0x2000) >> 11) \ + | (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) ) + +static int netdev_get_eeprom(struct net_device *dev, u8 *buf) +{ + int i; + u16 *ebuf = (u16 *)buf; + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + + /* eeprom_read reads 16 bits, and indexes by 16 bits */ + for (i = 0; i < np->eeprom_size/2; i++) { + ebuf[i] = eeprom_read(ioaddr, i); + /* The EEPROM itself stores data bit-swapped, but eeprom_read + * reads it back "sanely". So we swap it back here in order to + * present it to userland as it is stored. */ + ebuf[i] = SWAP_BITS(ebuf[i]); + } + return 0; +} + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct mii_ioctl_data *data = if_mii(rq); + struct netdev_private *np = netdev_priv(dev); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = np->phy_addr_external; + fallthrough; + + case SIOCGMIIREG: /* Read MII PHY register. */ + /* The phy_id is not enough to uniquely identify + * the intended target. Therefore the command is sent to + * the given mii on the current port. + */ + if (dev->if_port == PORT_TP) { + if ((data->phy_id & 0x1f) == np->phy_addr_external) + data->val_out = mdio_read(dev, + data->reg_num & 0x1f); + else + data->val_out = 0; + } else { + move_int_phy(dev, data->phy_id & 0x1f); + data->val_out = miiport_read(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f); + } + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (dev->if_port == PORT_TP) { + if ((data->phy_id & 0x1f) == np->phy_addr_external) { + if ((data->reg_num & 0x1f) == MII_ADVERTISE) + np->advertising = data->val_in; + mdio_write(dev, data->reg_num & 0x1f, + data->val_in); + } + } else { + if ((data->phy_id & 0x1f) == np->phy_addr_external) { + if ((data->reg_num & 0x1f) == MII_ADVERTISE) + np->advertising = data->val_in; + } + move_int_phy(dev, data->phy_id & 0x1f); + miiport_write(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, + data->val_in); + } + return 0; + default: + return -EOPNOTSUPP; + } +} + +static void enable_wol_mode(struct net_device *dev, int enable_intr) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + + if (netif_msg_wol(np)) + printk(KERN_INFO "%s: remaining active for wake-on-lan\n", + dev->name); + + /* For WOL we must restart the rx process in silent mode. + * Write NULL to the RxRingPtr. Only possible if + * rx process is stopped + */ + writel(0, ioaddr + RxRingPtr); + + /* read WoL status to clear */ + readl(ioaddr + WOLCmd); + + /* PME on, clear status */ + writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun); + + /* and restart the rx process */ + writel(RxOn, ioaddr + ChipCmd); + + if (enable_intr) { + /* enable the WOL interrupt. + * Could be used to send a netlink message. + */ + writel(WOLPkt | LinkChange, ioaddr + IntrMask); + natsemi_irq_enable(dev); + } +} + +static int netdev_close(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + const int irq = np->pci_dev->irq; + + if (netif_msg_ifdown(np)) + printk(KERN_DEBUG + "%s: Shutting down ethercard, status was %#04x.\n", + dev->name, (int)readl(ioaddr + ChipCmd)); + if (netif_msg_pktdata(np)) + printk(KERN_DEBUG + "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, + np->cur_rx, np->dirty_rx); + + napi_disable(&np->napi); + + /* + * FIXME: what if someone tries to close a device + * that is suspended? + * Should we reenable the nic to switch to + * the final WOL settings? + */ + + del_timer_sync(&np->timer); + disable_irq(irq); + spin_lock_irq(&np->lock); + natsemi_irq_disable(dev); + np->hands_off = 1; + spin_unlock_irq(&np->lock); + enable_irq(irq); + + free_irq(irq, dev); + + /* Interrupt disabled, interrupt handler released, + * queue stopped, timer deleted, rtnl_lock held + * All async codepaths that access the driver are disabled. + */ + spin_lock_irq(&np->lock); + np->hands_off = 0; + readl(ioaddr + IntrMask); + readw(ioaddr + MIntrStatus); + + /* Freeze Stats */ + writel(StatsFreeze, ioaddr + StatsCtrl); + + /* Stop the chip's Tx and Rx processes. */ + natsemi_stop_rxtx(dev); + + __get_stats(dev); + spin_unlock_irq(&np->lock); + + /* clear the carrier last - an interrupt could reenable it otherwise */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + dump_ring(dev); + drain_ring(dev); + free_ring(dev); + + { + u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; + if (wol) { + /* restart the NIC in WOL mode. + * The nic must be stopped for this. + */ + enable_wol_mode(dev, 0); + } else { + /* Restore PME enable bit unmolested */ + writel(np->SavedClkRun, ioaddr + ClkRun); + } + } + return 0; +} + + +static void natsemi_remove1(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + void __iomem * ioaddr = ns_ioaddr(dev); + + NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround); + unregister_netdev (dev); + iounmap(ioaddr); + free_netdev (dev); +} + +/* + * The ns83815 chip doesn't have explicit RxStop bits. + * Kicking the Rx or Tx process for a new packet reenables the Rx process + * of the nic, thus this function must be very careful: + * + * suspend/resume synchronization: + * entry points: + * netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler, + * start_tx, ns_tx_timeout + * + * No function accesses the hardware without checking np->hands_off. + * the check occurs under spin_lock_irq(&np->lock); + * exceptions: + * * netdev_ioctl: noncritical access. + * * netdev_open: cannot happen due to the device_detach + * * netdev_close: doesn't hurt. + * * netdev_timer: timer stopped by natsemi_suspend. + * * intr_handler: doesn't acquire the spinlock. suspend calls + * disable_irq() to enforce synchronization. + * * natsemi_poll: checks before reenabling interrupts. suspend + * sets hands_off, disables interrupts and then waits with + * napi_disable(). + * + * Interrupts must be disabled, otherwise hands_off can cause irq storms. + */ + +static int __maybe_unused natsemi_suspend(struct device *dev_d) +{ + struct net_device *dev = dev_get_drvdata(dev_d); + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + rtnl_lock(); + if (netif_running (dev)) { + const int irq = np->pci_dev->irq; + + del_timer_sync(&np->timer); + + disable_irq(irq); + spin_lock_irq(&np->lock); + + natsemi_irq_disable(dev); + np->hands_off = 1; + natsemi_stop_rxtx(dev); + netif_stop_queue(dev); + + spin_unlock_irq(&np->lock); + enable_irq(irq); + + napi_disable(&np->napi); + + /* Update the error counts. */ + __get_stats(dev); + + /* pci_power_off(pdev, -1); */ + drain_ring(dev); + { + u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; + /* Restore PME enable bit */ + if (wol) { + /* restart the NIC in WOL mode. + * The nic must be stopped for this. + * FIXME: use the WOL interrupt + */ + enable_wol_mode(dev, 0); + } else { + /* Restore PME enable bit unmolested */ + writel(np->SavedClkRun, ioaddr + ClkRun); + } + } + } + netif_device_detach(dev); + rtnl_unlock(); + return 0; +} + + +static int __maybe_unused natsemi_resume(struct device *dev_d) +{ + struct net_device *dev = dev_get_drvdata(dev_d); + struct netdev_private *np = netdev_priv(dev); + + rtnl_lock(); + if (netif_device_present(dev)) + goto out; + if (netif_running(dev)) { + const int irq = np->pci_dev->irq; + + BUG_ON(!np->hands_off); + /* pci_power_on(pdev); */ + + napi_enable(&np->napi); + + natsemi_reset(dev); + init_ring(dev); + disable_irq(irq); + spin_lock_irq(&np->lock); + np->hands_off = 0; + init_registers(dev); + netif_device_attach(dev); + spin_unlock_irq(&np->lock); + enable_irq(irq); + + mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ)); + } + netif_device_attach(dev); +out: + rtnl_unlock(); + return 0; +} + +static SIMPLE_DEV_PM_OPS(natsemi_pm_ops, natsemi_suspend, natsemi_resume); + +static struct pci_driver natsemi_driver = { + .name = DRV_NAME, + .id_table = natsemi_pci_tbl, + .probe = natsemi_probe1, + .remove = natsemi_remove1, + .driver.pm = &natsemi_pm_ops, +}; + +static int __init natsemi_init_mod (void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + + return pci_register_driver(&natsemi_driver); +} + +static void __exit natsemi_exit_mod (void) +{ + pci_unregister_driver (&natsemi_driver); +} + +module_init(natsemi_init_mod); +module_exit(natsemi_exit_mod); + diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c new file mode 100644 index 000000000..72794d158 --- /dev/null +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -0,0 +1,2263 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#define VERSION "0.23" +/* ns83820.c by Benjamin LaHaise with contributions. + * + * Questions/comments/discussion to linux-ns83820@kvack.org. + * + * $Revision: 1.34.2.23 $ + * + * Copyright 2001 Benjamin LaHaise. + * Copyright 2001, 2002 Red Hat. + * + * Mmmm, chocolate vanilla mocha... + * + * ChangeLog + * ========= + * 20010414 0.1 - created + * 20010622 0.2 - basic rx and tx. + * 20010711 0.3 - added duplex and link state detection support. + * 20010713 0.4 - zero copy, no hangs. + * 0.5 - 64 bit dma support (davem will hate me for this) + * - disable jumbo frames to avoid tx hangs + * - work around tx deadlocks on my 1.02 card via + * fiddling with TXCFG + * 20010810 0.6 - use pci dma api for ringbuffers, work on ia64 + * 20010816 0.7 - misc cleanups + * 20010826 0.8 - fix critical zero copy bugs + * 0.9 - internal experiment + * 20010827 0.10 - fix ia64 unaligned access. + * 20010906 0.11 - accept all packets with checksum errors as + * otherwise fragments get lost + * - fix >> 32 bugs + * 0.12 - add statistics counters + * - add allmulti/promisc support + * 20011009 0.13 - hotplug support, other smaller pci api cleanups + * 20011204 0.13a - optical transceiver support added + * by Michael Clark <michael@metaparadigm.com> + * 20011205 0.13b - call register_netdev earlier in initialization + * suppress duplicate link status messages + * 20011117 0.14 - ethtool GDRVINFO, GLINK support from jgarzik + * 20011204 0.15 get ppc (big endian) working + * 20011218 0.16 various cleanups + * 20020310 0.17 speedups + * 20020610 0.18 - actually use the pci dma api for highmem + * - remove pci latency register fiddling + * 0.19 - better bist support + * - add ihr and reset_phy parameters + * - gmii bus probing + * - fix missed txok introduced during performance + * tuning + * 0.20 - fix stupid RFEN thinko. i am such a smurf. + * 20040828 0.21 - add hardware vlan accleration + * by Neil Horman <nhorman@redhat.com> + * 20050406 0.22 - improved DAC ifdefs from Andi Kleen + * - removal of dead code from Adrian Bunk + * - fix half duplex collision behaviour + * Driver Overview + * =============== + * + * This driver was originally written for the National Semiconductor + * 83820 chip, a 10/100/1000 Mbps 64 bit PCI ethernet NIC. Hopefully + * this code will turn out to be a) clean, b) correct, and c) fast. + * With that in mind, I'm aiming to split the code up as much as + * reasonably possible. At present there are X major sections that + * break down into a) packet receive, b) packet transmit, c) link + * management, d) initialization and configuration. Where possible, + * these code paths are designed to run in parallel. + * + * This driver has been tested and found to work with the following + * cards (in no particular order): + * + * Cameo SOHO-GA2000T SOHO-GA2500T + * D-Link DGE-500T + * PureData PDP8023Z-TG + * SMC SMC9452TX SMC9462TX + * Netgear GA621 + * + * Special thanks to SMC for providing hardware to test this driver on. + * + * Reports of success or failure would be greatly appreciated. + */ +//#define dprintk printk +#define dprintk(x...) do { } while (0) + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ip.h> /* for iph */ +#include <linux/in.h> /* for IPPROTO_... */ +#include <linux/compiler.h> +#include <linux/prefetch.h> +#include <linux/ethtool.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/if_vlan.h> +#include <linux/rtnetlink.h> +#include <linux/jiffies.h> +#include <linux/slab.h> + +#include <asm/io.h> +#include <linux/uaccess.h> + +#define DRV_NAME "ns83820" + +/* Global parameters. See module_param near the bottom. */ +static int ihr = 2; +static int reset_phy = 0; +static int lnksts = 0; /* CFG_LNKSTS bit polarity */ + +/* Dprintk is used for more interesting debug events */ +#undef Dprintk +#define Dprintk dprintk + +/* tunables */ +#define RX_BUF_SIZE 1500 /* 8192 */ +#if IS_ENABLED(CONFIG_VLAN_8021Q) +#define NS83820_VLAN_ACCEL_SUPPORT +#endif + +/* Must not exceed ~65000. */ +#define NR_RX_DESC 64 +#define NR_TX_DESC 128 + +/* not tunable */ +#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14) /* rx/tx mac addr + type */ + +#define MIN_TX_DESC_FREE 8 + +/* register defines */ +#define CFGCS 0x04 + +#define CR_TXE 0x00000001 +#define CR_TXD 0x00000002 +/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE + * The Receive engine skips one descriptor and moves + * onto the next one!! */ +#define CR_RXE 0x00000004 +#define CR_RXD 0x00000008 +#define CR_TXR 0x00000010 +#define CR_RXR 0x00000020 +#define CR_SWI 0x00000080 +#define CR_RST 0x00000100 + +#define PTSCR_EEBIST_FAIL 0x00000001 +#define PTSCR_EEBIST_EN 0x00000002 +#define PTSCR_EELOAD_EN 0x00000004 +#define PTSCR_RBIST_FAIL 0x000001b8 +#define PTSCR_RBIST_DONE 0x00000200 +#define PTSCR_RBIST_EN 0x00000400 +#define PTSCR_RBIST_RST 0x00002000 + +#define MEAR_EEDI 0x00000001 +#define MEAR_EEDO 0x00000002 +#define MEAR_EECLK 0x00000004 +#define MEAR_EESEL 0x00000008 +#define MEAR_MDIO 0x00000010 +#define MEAR_MDDIR 0x00000020 +#define MEAR_MDC 0x00000040 + +#define ISR_TXDESC3 0x40000000 +#define ISR_TXDESC2 0x20000000 +#define ISR_TXDESC1 0x10000000 +#define ISR_TXDESC0 0x08000000 +#define ISR_RXDESC3 0x04000000 +#define ISR_RXDESC2 0x02000000 +#define ISR_RXDESC1 0x01000000 +#define ISR_RXDESC0 0x00800000 +#define ISR_TXRCMP 0x00400000 +#define ISR_RXRCMP 0x00200000 +#define ISR_DPERR 0x00100000 +#define ISR_SSERR 0x00080000 +#define ISR_RMABT 0x00040000 +#define ISR_RTABT 0x00020000 +#define ISR_RXSOVR 0x00010000 +#define ISR_HIBINT 0x00008000 +#define ISR_PHY 0x00004000 +#define ISR_PME 0x00002000 +#define ISR_SWI 0x00001000 +#define ISR_MIB 0x00000800 +#define ISR_TXURN 0x00000400 +#define ISR_TXIDLE 0x00000200 +#define ISR_TXERR 0x00000100 +#define ISR_TXDESC 0x00000080 +#define ISR_TXOK 0x00000040 +#define ISR_RXORN 0x00000020 +#define ISR_RXIDLE 0x00000010 +#define ISR_RXEARLY 0x00000008 +#define ISR_RXERR 0x00000004 +#define ISR_RXDESC 0x00000002 +#define ISR_RXOK 0x00000001 + +#define TXCFG_CSI 0x80000000 +#define TXCFG_HBI 0x40000000 +#define TXCFG_MLB 0x20000000 +#define TXCFG_ATP 0x10000000 +#define TXCFG_ECRETRY 0x00800000 +#define TXCFG_BRST_DIS 0x00080000 +#define TXCFG_MXDMA1024 0x00000000 +#define TXCFG_MXDMA512 0x00700000 +#define TXCFG_MXDMA256 0x00600000 +#define TXCFG_MXDMA128 0x00500000 +#define TXCFG_MXDMA64 0x00400000 +#define TXCFG_MXDMA32 0x00300000 +#define TXCFG_MXDMA16 0x00200000 +#define TXCFG_MXDMA8 0x00100000 + +#define CFG_LNKSTS 0x80000000 +#define CFG_SPDSTS 0x60000000 +#define CFG_SPDSTS1 0x40000000 +#define CFG_SPDSTS0 0x20000000 +#define CFG_DUPSTS 0x10000000 +#define CFG_TBI_EN 0x01000000 +#define CFG_MODE_1000 0x00400000 +/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy. + * Read the Phy response and then configure the MAC accordingly */ +#define CFG_AUTO_1000 0x00200000 +#define CFG_PINT_CTL 0x001c0000 +#define CFG_PINT_DUPSTS 0x00100000 +#define CFG_PINT_LNKSTS 0x00080000 +#define CFG_PINT_SPDSTS 0x00040000 +#define CFG_TMRTEST 0x00020000 +#define CFG_MRM_DIS 0x00010000 +#define CFG_MWI_DIS 0x00008000 +#define CFG_T64ADDR 0x00004000 +#define CFG_PCI64_DET 0x00002000 +#define CFG_DATA64_EN 0x00001000 +#define CFG_M64ADDR 0x00000800 +#define CFG_PHY_RST 0x00000400 +#define CFG_PHY_DIS 0x00000200 +#define CFG_EXTSTS_EN 0x00000100 +#define CFG_REQALG 0x00000080 +#define CFG_SB 0x00000040 +#define CFG_POW 0x00000020 +#define CFG_EXD 0x00000010 +#define CFG_PESEL 0x00000008 +#define CFG_BROM_DIS 0x00000004 +#define CFG_EXT_125 0x00000002 +#define CFG_BEM 0x00000001 + +#define EXTSTS_UDPPKT 0x00200000 +#define EXTSTS_TCPPKT 0x00080000 +#define EXTSTS_IPPKT 0x00020000 +#define EXTSTS_VPKT 0x00010000 +#define EXTSTS_VTG_MASK 0x0000ffff + +#define SPDSTS_POLARITY (CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0)) + +#define MIBC_MIBS 0x00000008 +#define MIBC_ACLR 0x00000004 +#define MIBC_FRZ 0x00000002 +#define MIBC_WRN 0x00000001 + +#define PCR_PSEN (1 << 31) +#define PCR_PS_MCAST (1 << 30) +#define PCR_PS_DA (1 << 29) +#define PCR_STHI_8 (3 << 23) +#define PCR_STLO_4 (1 << 23) +#define PCR_FFHI_8K (3 << 21) +#define PCR_FFLO_4K (1 << 21) +#define PCR_PAUSE_CNT 0xFFFE + +#define RXCFG_AEP 0x80000000 +#define RXCFG_ARP 0x40000000 +#define RXCFG_STRIPCRC 0x20000000 +#define RXCFG_RX_FD 0x10000000 +#define RXCFG_ALP 0x08000000 +#define RXCFG_AIRL 0x04000000 +#define RXCFG_MXDMA512 0x00700000 +#define RXCFG_DRTH 0x0000003e +#define RXCFG_DRTH0 0x00000002 + +#define RFCR_RFEN 0x80000000 +#define RFCR_AAB 0x40000000 +#define RFCR_AAM 0x20000000 +#define RFCR_AAU 0x10000000 +#define RFCR_APM 0x08000000 +#define RFCR_APAT 0x07800000 +#define RFCR_APAT3 0x04000000 +#define RFCR_APAT2 0x02000000 +#define RFCR_APAT1 0x01000000 +#define RFCR_APAT0 0x00800000 +#define RFCR_AARP 0x00400000 +#define RFCR_MHEN 0x00200000 +#define RFCR_UHEN 0x00100000 +#define RFCR_ULM 0x00080000 + +#define VRCR_RUDPE 0x00000080 +#define VRCR_RTCPE 0x00000040 +#define VRCR_RIPE 0x00000020 +#define VRCR_IPEN 0x00000010 +#define VRCR_DUTF 0x00000008 +#define VRCR_DVTF 0x00000004 +#define VRCR_VTREN 0x00000002 +#define VRCR_VTDEN 0x00000001 + +#define VTCR_PPCHK 0x00000008 +#define VTCR_GCHK 0x00000004 +#define VTCR_VPPTI 0x00000002 +#define VTCR_VGTI 0x00000001 + +#define CR 0x00 +#define CFG 0x04 +#define MEAR 0x08 +#define PTSCR 0x0c +#define ISR 0x10 +#define IMR 0x14 +#define IER 0x18 +#define IHR 0x1c +#define TXDP 0x20 +#define TXDP_HI 0x24 +#define TXCFG 0x28 +#define GPIOR 0x2c +#define RXDP 0x30 +#define RXDP_HI 0x34 +#define RXCFG 0x38 +#define PQCR 0x3c +#define WCSR 0x40 +#define PCR 0x44 +#define RFCR 0x48 +#define RFDR 0x4c + +#define SRR 0x58 + +#define VRCR 0xbc +#define VTCR 0xc0 +#define VDR 0xc4 +#define CCSR 0xcc + +#define TBICR 0xe0 +#define TBISR 0xe4 +#define TANAR 0xe8 +#define TANLPAR 0xec +#define TANER 0xf0 +#define TESR 0xf4 + +#define TBICR_MR_AN_ENABLE 0x00001000 +#define TBICR_MR_RESTART_AN 0x00000200 + +#define TBISR_MR_LINK_STATUS 0x00000020 +#define TBISR_MR_AN_COMPLETE 0x00000004 + +#define TANAR_PS2 0x00000100 +#define TANAR_PS1 0x00000080 +#define TANAR_HALF_DUP 0x00000040 +#define TANAR_FULL_DUP 0x00000020 + +#define GPIOR_GP5_OE 0x00000200 +#define GPIOR_GP4_OE 0x00000100 +#define GPIOR_GP3_OE 0x00000080 +#define GPIOR_GP2_OE 0x00000040 +#define GPIOR_GP1_OE 0x00000020 +#define GPIOR_GP3_OUT 0x00000004 +#define GPIOR_GP1_OUT 0x00000001 + +#define LINK_AUTONEGOTIATE 0x01 +#define LINK_DOWN 0x02 +#define LINK_UP 0x04 + +#define HW_ADDR_LEN sizeof(dma_addr_t) +#define desc_addr_set(desc, addr) \ + do { \ + ((desc)[0] = cpu_to_le32(addr)); \ + if (HW_ADDR_LEN == 8) \ + (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ + } while(0) +#define desc_addr_get(desc) \ + (le32_to_cpu((desc)[0]) | \ + (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) + +#define DESC_LINK 0 +#define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) +#define DESC_CMDSTS (DESC_BUFPTR + HW_ADDR_LEN/4) +#define DESC_EXTSTS (DESC_CMDSTS + 4/4) + +#define CMDSTS_OWN 0x80000000 +#define CMDSTS_MORE 0x40000000 +#define CMDSTS_INTR 0x20000000 +#define CMDSTS_ERR 0x10000000 +#define CMDSTS_OK 0x08000000 +#define CMDSTS_RUNT 0x00200000 +#define CMDSTS_LEN_MASK 0x0000ffff + +#define CMDSTS_DEST_MASK 0x01800000 +#define CMDSTS_DEST_SELF 0x00800000 +#define CMDSTS_DEST_MULTI 0x01000000 + +#define DESC_SIZE 8 /* Should be cache line sized */ + +struct rx_info { + spinlock_t lock; + int up; + unsigned long idle; + + struct sk_buff *skbs[NR_RX_DESC]; + + __le32 *next_rx_desc; + u16 next_rx, next_empty; + + __le32 *descs; + dma_addr_t phy_descs; +}; + + +struct ns83820 { + u8 __iomem *base; + + struct pci_dev *pci_dev; + struct net_device *ndev; + + struct rx_info rx_info; + struct tasklet_struct rx_tasklet; + + unsigned ihr; + struct work_struct tq_refill; + + /* protects everything below. irqsave when using. */ + spinlock_t misc_lock; + + u32 CFG_cache; + + u32 MEAR_cache; + u32 IMR_cache; + + unsigned linkstate; + + spinlock_t tx_lock; + + u16 tx_done_idx; + u16 tx_idx; + volatile u16 tx_free_idx; /* idx of free desc chain */ + u16 tx_intr_idx; + + atomic_t nr_tx_skbs; + struct sk_buff *tx_skbs[NR_TX_DESC]; + + char pad[16] __attribute__((aligned(16))); + __le32 *tx_descs; + dma_addr_t tx_phy_descs; + + struct timer_list tx_watchdog; +}; + +static inline struct ns83820 *PRIV(struct net_device *dev) +{ + return netdev_priv(dev); +} + +#define __kick_rx(dev) writel(CR_RXE, dev->base + CR) + +static inline void kick_rx(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + dprintk("kick_rx: maybe kicking\n"); + if (test_and_clear_bit(0, &dev->rx_info.idle)) { + dprintk("actually kicking\n"); + writel(dev->rx_info.phy_descs + + (4 * DESC_SIZE * dev->rx_info.next_rx), + dev->base + RXDP); + if (dev->rx_info.next_rx == dev->rx_info.next_empty) + printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n", + ndev->name); + __kick_rx(dev); + } +} + +//free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC +#define start_tx_okay(dev) \ + (((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE) + +/* Packet Receiver + * + * The hardware supports linked lists of receive descriptors for + * which ownership is transferred back and forth by means of an + * ownership bit. While the hardware does support the use of a + * ring for receive descriptors, we only make use of a chain in + * an attempt to reduce bus traffic under heavy load scenarios. + * This will also make bugs a bit more obvious. The current code + * only makes use of a single rx chain; I hope to implement + * priority based rx for version 1.0. Goal: even under overload + * conditions, still route realtime traffic with as low jitter as + * possible. + */ +static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts) +{ + desc_addr_set(desc + DESC_LINK, link); + desc_addr_set(desc + DESC_BUFPTR, buf); + desc[DESC_EXTSTS] = cpu_to_le32(extsts); + mb(); + desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); +} + +#define nr_rx_empty(dev) ((NR_RX_DESC-2 + dev->rx_info.next_rx - dev->rx_info.next_empty) % NR_RX_DESC) +static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) +{ + unsigned next_empty; + u32 cmdsts; + __le32 *sg; + dma_addr_t buf; + + next_empty = dev->rx_info.next_empty; + + /* don't overrun last rx marker */ + if (unlikely(nr_rx_empty(dev) <= 2)) { + kfree_skb(skb); + return 1; + } + +#if 0 + dprintk("next_empty[%d] nr_used[%d] next_rx[%d]\n", + dev->rx_info.next_empty, + dev->rx_info.nr_used, + dev->rx_info.next_rx + ); +#endif + + sg = dev->rx_info.descs + (next_empty * DESC_SIZE); + BUG_ON(NULL != dev->rx_info.skbs[next_empty]); + dev->rx_info.skbs[next_empty] = skb; + + dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC; + cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR; + buf = dma_map_single(&dev->pci_dev->dev, skb->data, REAL_RX_BUF_SIZE, + DMA_FROM_DEVICE); + build_rx_desc(dev, sg, 0, buf, cmdsts, 0); + /* update link of previous rx */ + if (likely(next_empty != dev->rx_info.next_rx)) + dev->rx_info.descs[((NR_RX_DESC + next_empty - 1) % NR_RX_DESC) * DESC_SIZE] = cpu_to_le32(dev->rx_info.phy_descs + (next_empty * DESC_SIZE * 4)); + + return 0; +} + +static inline int rx_refill(struct net_device *ndev, gfp_t gfp) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + unsigned long flags = 0; + + if (unlikely(nr_rx_empty(dev) <= 2)) + return 0; + + dprintk("rx_refill(%p)\n", ndev); + if (gfp == GFP_ATOMIC) + spin_lock_irqsave(&dev->rx_info.lock, flags); + for (i=0; i<NR_RX_DESC; i++) { + struct sk_buff *skb; + long res; + + /* extra 16 bytes for alignment */ + skb = __netdev_alloc_skb(ndev, REAL_RX_BUF_SIZE+16, gfp); + if (unlikely(!skb)) + break; + + skb_reserve(skb, skb->data - PTR_ALIGN(skb->data, 16)); + if (gfp != GFP_ATOMIC) + spin_lock_irqsave(&dev->rx_info.lock, flags); + res = ns83820_add_rx_skb(dev, skb); + if (gfp != GFP_ATOMIC) + spin_unlock_irqrestore(&dev->rx_info.lock, flags); + if (res) { + i = 1; + break; + } + } + if (gfp == GFP_ATOMIC) + spin_unlock_irqrestore(&dev->rx_info.lock, flags); + + return i ? 0 : -ENOMEM; +} + +static void rx_refill_atomic(struct net_device *ndev) +{ + rx_refill(ndev, GFP_ATOMIC); +} + +/* REFILL */ +static inline void queue_refill(struct work_struct *work) +{ + struct ns83820 *dev = container_of(work, struct ns83820, tq_refill); + struct net_device *ndev = dev->ndev; + + rx_refill(ndev, GFP_KERNEL); + if (dev->rx_info.up) + kick_rx(ndev); +} + +static inline void clear_rx_desc(struct ns83820 *dev, unsigned i) +{ + build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0); +} + +static void phy_intr(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" }; + u32 cfg, new_cfg; + u32 tanar, tanlpar; + int speed, fullduplex, newlinkstate; + + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + + if (dev->CFG_cache & CFG_TBI_EN) { + u32 __maybe_unused tbisr; + + /* we have an optical transceiver */ + tbisr = readl(dev->base + TBISR); + tanar = readl(dev->base + TANAR); + tanlpar = readl(dev->base + TANLPAR); + dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n", + tbisr, tanar, tanlpar); + + if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) && + (tanar & TANAR_FULL_DUP)) ) { + + /* both of us are full duplex */ + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + /* Light up full duplex LED */ + writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, + dev->base + GPIOR); + + } else if (((tanlpar & TANAR_HALF_DUP) && + (tanar & TANAR_HALF_DUP)) || + ((tanlpar & TANAR_FULL_DUP) && + (tanar & TANAR_HALF_DUP)) || + ((tanlpar & TANAR_HALF_DUP) && + (tanar & TANAR_FULL_DUP))) { + + /* one or both of us are half duplex */ + writel((readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~RXCFG_RX_FD, + dev->base + RXCFG); + /* Turn off full duplex LED */ + writel(readl(dev->base + GPIOR) & ~GPIOR_GP1_OUT, + dev->base + GPIOR); + } + + speed = 4; /* 1000F */ + + } else { + /* we have a copper transceiver */ + new_cfg = dev->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS); + + if (cfg & CFG_SPDSTS1) + new_cfg |= CFG_MODE_1000; + else + new_cfg &= ~CFG_MODE_1000; + + speed = ((cfg / CFG_SPDSTS0) & 3); + fullduplex = (cfg & CFG_DUPSTS); + + if (fullduplex) { + new_cfg |= CFG_SB; + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + } else { + writel(readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI), + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), + dev->base + RXCFG); + } + + if ((cfg & CFG_LNKSTS) && + ((new_cfg ^ dev->CFG_cache) != 0)) { + writel(new_cfg, dev->base + CFG); + dev->CFG_cache = new_cfg; + } + + dev->CFG_cache &= ~CFG_SPDSTS; + dev->CFG_cache |= cfg & CFG_SPDSTS; + } + + newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN; + + if (newlinkstate & LINK_UP && + dev->linkstate != newlinkstate) { + netif_start_queue(ndev); + netif_wake_queue(ndev); + printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n", + ndev->name, + speeds[speed], + fullduplex ? "full" : "half"); + } else if (newlinkstate & LINK_DOWN && + dev->linkstate != newlinkstate) { + netif_stop_queue(ndev); + printk(KERN_INFO "%s: link now down.\n", ndev->name); + } + + dev->linkstate = newlinkstate; +} + +static int ns83820_setup_rx(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + int ret; + + dprintk("ns83820_setup_rx(%p)\n", ndev); + + dev->rx_info.idle = 1; + dev->rx_info.next_rx = 0; + dev->rx_info.next_rx_desc = dev->rx_info.descs; + dev->rx_info.next_empty = 0; + + for (i=0; i<NR_RX_DESC; i++) + clear_rx_desc(dev, i); + + writel(0, dev->base + RXDP_HI); + writel(dev->rx_info.phy_descs, dev->base + RXDP); + + ret = rx_refill(ndev, GFP_KERNEL); + if (!ret) { + dprintk("starting receiver\n"); + /* prevent the interrupt handler from stomping on us */ + spin_lock_irq(&dev->rx_info.lock); + + writel(0x0001, dev->base + CCSR); + writel(0, dev->base + RFCR); + writel(0x7fc00000, dev->base + RFCR); + writel(0xffc00000, dev->base + RFCR); + + dev->rx_info.up = 1; + + phy_intr(ndev); + + /* Okay, let it rip */ + spin_lock(&dev->misc_lock); + dev->IMR_cache |= ISR_PHY; + dev->IMR_cache |= ISR_RXRCMP; + //dev->IMR_cache |= ISR_RXERR; + //dev->IMR_cache |= ISR_RXOK; + dev->IMR_cache |= ISR_RXORN; + dev->IMR_cache |= ISR_RXSOVR; + dev->IMR_cache |= ISR_RXDESC; + dev->IMR_cache |= ISR_RXIDLE; + dev->IMR_cache |= ISR_TXDESC; + dev->IMR_cache |= ISR_TXIDLE; + + writel(dev->IMR_cache, dev->base + IMR); + writel(1, dev->base + IER); + spin_unlock(&dev->misc_lock); + + kick_rx(ndev); + + spin_unlock_irq(&dev->rx_info.lock); + } + return ret; +} + +static void ns83820_cleanup_rx(struct ns83820 *dev) +{ + unsigned i; + unsigned long flags; + + dprintk("ns83820_cleanup_rx(%p)\n", dev); + + /* disable receive interrupts */ + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY | ISR_RXIDLE); + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + + /* synchronize with the interrupt handler and kill it */ + dev->rx_info.up = 0; + synchronize_irq(dev->pci_dev->irq); + + /* touch the pci bus... */ + readl(dev->base + IMR); + + /* assumes the transmitter is already disabled and reset */ + writel(0, dev->base + RXDP_HI); + writel(0, dev->base + RXDP); + + for (i=0; i<NR_RX_DESC; i++) { + struct sk_buff *skb = dev->rx_info.skbs[i]; + dev->rx_info.skbs[i] = NULL; + clear_rx_desc(dev, i); + kfree_skb(skb); + } +} + +static void ns83820_rx_kick(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + /*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ { + if (dev->rx_info.up) { + rx_refill_atomic(ndev); + kick_rx(ndev); + } + } + + if (dev->rx_info.up && nr_rx_empty(dev) > NR_RX_DESC*3/4) + schedule_work(&dev->tq_refill); + else + kick_rx(ndev); + if (dev->rx_info.idle) + printk(KERN_DEBUG "%s: BAD\n", ndev->name); +} + +/* rx_irq + * + */ +static void rx_irq(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + struct rx_info *info = &dev->rx_info; + unsigned next_rx; + int rx_rc, len; + u32 cmdsts; + __le32 *desc; + unsigned long flags; + int nr = 0; + + dprintk("rx_irq(%p)\n", ndev); + dprintk("rxdp: %08x, descs: %08lx next_rx[%d]: %p next_empty[%d]: %p\n", + readl(dev->base + RXDP), + (long)(dev->rx_info.phy_descs), + (int)dev->rx_info.next_rx, + (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_rx)), + (int)dev->rx_info.next_empty, + (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_empty)) + ); + + spin_lock_irqsave(&info->lock, flags); + if (!info->up) + goto out; + + dprintk("walking descs\n"); + next_rx = info->next_rx; + desc = info->next_rx_desc; + while ((CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) && + (cmdsts != CMDSTS_OWN)) { + struct sk_buff *skb; + u32 extsts = le32_to_cpu(desc[DESC_EXTSTS]); + dma_addr_t bufptr = desc_addr_get(desc + DESC_BUFPTR); + + dprintk("cmdsts: %08x\n", cmdsts); + dprintk("link: %08x\n", cpu_to_le32(desc[DESC_LINK])); + dprintk("extsts: %08x\n", extsts); + + skb = info->skbs[next_rx]; + info->skbs[next_rx] = NULL; + info->next_rx = (next_rx + 1) % NR_RX_DESC; + + mb(); + clear_rx_desc(dev, next_rx); + + dma_unmap_single(&dev->pci_dev->dev, bufptr, RX_BUF_SIZE, + DMA_FROM_DEVICE); + len = cmdsts & CMDSTS_LEN_MASK; +#ifdef NS83820_VLAN_ACCEL_SUPPORT + /* NH: As was mentioned below, this chip is kinda + * brain dead about vlan tag stripping. Frames + * that are 64 bytes with a vlan header appended + * like arp frames, or pings, are flagged as Runts + * when the tag is stripped and hardware. This + * also means that the OK bit in the descriptor + * is cleared when the frame comes in so we have + * to do a specific length check here to make sure + * the frame would have been ok, had we not stripped + * the tag. + */ + if (likely((CMDSTS_OK & cmdsts) || + ((cmdsts & CMDSTS_RUNT) && len >= 56))) { +#else + if (likely(CMDSTS_OK & cmdsts)) { +#endif + skb_put(skb, len); + if (unlikely(!skb)) + goto netdev_mangle_me_harder_failed; + if (cmdsts & CMDSTS_DEST_MULTI) + ndev->stats.multicast++; + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += len; + if ((extsts & 0x002a0000) && !(extsts & 0x00540000)) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else { + skb_checksum_none_assert(skb); + } + skb->protocol = eth_type_trans(skb, ndev); +#ifdef NS83820_VLAN_ACCEL_SUPPORT + if(extsts & EXTSTS_VPKT) { + unsigned short tag; + + tag = ntohs(extsts & EXTSTS_VTG_MASK); + __vlan_hwaccel_put_tag(skb, htons(ETH_P_IPV6), tag); + } +#endif + rx_rc = netif_rx(skb); + if (NET_RX_DROP == rx_rc) { +netdev_mangle_me_harder_failed: + ndev->stats.rx_dropped++; + } + } else { + dev_kfree_skb_irq(skb); + } + + nr++; + next_rx = info->next_rx; + desc = info->descs + (DESC_SIZE * next_rx); + } + info->next_rx = next_rx; + info->next_rx_desc = info->descs + (DESC_SIZE * next_rx); + +out: + if (0 && !nr) { + Dprintk("dazed: cmdsts_f: %08x\n", cmdsts); + } + + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rx_action(struct tasklet_struct *t) +{ + struct ns83820 *dev = from_tasklet(dev, t, rx_tasklet); + struct net_device *ndev = dev->ndev; + rx_irq(ndev); + writel(ihr, dev->base + IHR); + + spin_lock_irq(&dev->misc_lock); + dev->IMR_cache |= ISR_RXDESC; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irq(&dev->misc_lock); + + rx_irq(ndev); + ns83820_rx_kick(ndev); +} + +/* Packet Transmit code + */ +static inline void kick_tx(struct ns83820 *dev) +{ + dprintk("kick_tx(%p): tx_idx=%d free_idx=%d\n", + dev, dev->tx_idx, dev->tx_free_idx); + writel(CR_TXE, dev->base + CR); +} + +/* No spinlock needed on the transmit irq path as the interrupt handler is + * serialized. + */ +static void do_tx_done(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cmdsts, tx_done_idx; + __le32 *desc; + + dprintk("do_tx_done(%p)\n", ndev); + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + while ((tx_done_idx != dev->tx_free_idx) && + !(CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) ) { + struct sk_buff *skb; + unsigned len; + dma_addr_t addr; + + if (cmdsts & CMDSTS_ERR) + ndev->stats.tx_errors++; + if (cmdsts & CMDSTS_OK) + ndev->stats.tx_packets++; + if (cmdsts & CMDSTS_OK) + ndev->stats.tx_bytes += cmdsts & 0xffff; + + dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + tx_done_idx, dev->tx_free_idx, cmdsts); + skb = dev->tx_skbs[tx_done_idx]; + dev->tx_skbs[tx_done_idx] = NULL; + dprintk("done(%p)\n", skb); + + len = cmdsts & CMDSTS_LEN_MASK; + addr = desc_addr_get(desc + DESC_BUFPTR); + if (skb) { + dma_unmap_single(&dev->pci_dev->dev, addr, len, + DMA_TO_DEVICE); + dev_consume_skb_irq(skb); + atomic_dec(&dev->nr_tx_skbs); + } else + dma_unmap_page(&dev->pci_dev->dev, addr, len, + DMA_TO_DEVICE); + + tx_done_idx = (tx_done_idx + 1) % NR_TX_DESC; + dev->tx_done_idx = tx_done_idx; + desc[DESC_CMDSTS] = cpu_to_le32(0); + mb(); + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + } + + /* Allow network stack to resume queueing packets after we've + * finished transmitting at least 1/4 of the packets in the queue. + */ + if (netif_queue_stopped(ndev) && start_tx_okay(dev)) { + dprintk("start_queue(%p)\n", ndev); + netif_start_queue(ndev); + netif_wake_queue(ndev); + } +} + +static void ns83820_cleanup_tx(struct ns83820 *dev) +{ + unsigned i; + + for (i=0; i<NR_TX_DESC; i++) { + struct sk_buff *skb = dev->tx_skbs[i]; + dev->tx_skbs[i] = NULL; + if (skb) { + __le32 *desc = dev->tx_descs + (i * DESC_SIZE); + dma_unmap_single(&dev->pci_dev->dev, + desc_addr_get(desc + DESC_BUFPTR), + le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK, + DMA_TO_DEVICE); + dev_kfree_skb_irq(skb); + atomic_dec(&dev->nr_tx_skbs); + } + } + + memset(dev->tx_descs, 0, NR_TX_DESC * DESC_SIZE * 4); +} + +/* transmit routine. This code relies on the network layer serializing + * its calls in, but will run happily in parallel with the interrupt + * handler. This code currently has provisions for fragmenting tx buffers + * while trying to track down a bug in either the zero copy code or + * the tx fifo (hence the MAX_FRAG_LEN). + */ +static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 free_idx, cmdsts, extsts; + int nr_free, nr_frags; + unsigned tx_done_idx, last_idx; + dma_addr_t buf; + unsigned len; + skb_frag_t *frag; + int stopped = 0; + int do_intr = 0; + volatile __le32 *first_desc; + + dprintk("ns83820_hard_start_xmit\n"); + + nr_frags = skb_shinfo(skb)->nr_frags; +again: + if (unlikely(dev->CFG_cache & CFG_LNKSTS)) { + netif_stop_queue(ndev); + if (unlikely(dev->CFG_cache & CFG_LNKSTS)) + return NETDEV_TX_BUSY; + netif_start_queue(ndev); + } + + last_idx = free_idx = dev->tx_free_idx; + tx_done_idx = dev->tx_done_idx; + nr_free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC; + nr_free -= 1; + if (nr_free <= nr_frags) { + dprintk("stop_queue - not enough(%p)\n", ndev); + netif_stop_queue(ndev); + + /* Check again: we may have raced with a tx done irq */ + if (dev->tx_done_idx != tx_done_idx) { + dprintk("restart queue(%p)\n", ndev); + netif_start_queue(ndev); + goto again; + } + return NETDEV_TX_BUSY; + } + + if (free_idx == dev->tx_intr_idx) { + do_intr = 1; + dev->tx_intr_idx = (dev->tx_intr_idx + NR_TX_DESC/4) % NR_TX_DESC; + } + + nr_free -= nr_frags; + if (nr_free < MIN_TX_DESC_FREE) { + dprintk("stop_queue - last entry(%p)\n", ndev); + netif_stop_queue(ndev); + stopped = 1; + } + + frag = skb_shinfo(skb)->frags; + if (!nr_frags) + frag = NULL; + extsts = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + extsts |= EXTSTS_IPPKT; + if (IPPROTO_TCP == ip_hdr(skb)->protocol) + extsts |= EXTSTS_TCPPKT; + else if (IPPROTO_UDP == ip_hdr(skb)->protocol) + extsts |= EXTSTS_UDPPKT; + } + +#ifdef NS83820_VLAN_ACCEL_SUPPORT + if (skb_vlan_tag_present(skb)) { + /* fetch the vlan tag info out of the + * ancillary data if the vlan code + * is using hw vlan acceleration + */ + short tag = skb_vlan_tag_get(skb); + extsts |= (EXTSTS_VPKT | htons(tag)); + } +#endif + + len = skb->len; + if (nr_frags) + len -= skb->data_len; + buf = dma_map_single(&dev->pci_dev->dev, skb->data, len, + DMA_TO_DEVICE); + + first_desc = dev->tx_descs + (free_idx * DESC_SIZE); + + for (;;) { + volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); + + dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, + (unsigned long long)buf); + last_idx = free_idx; + free_idx = (free_idx + 1) % NR_TX_DESC; + desc[DESC_LINK] = cpu_to_le32(dev->tx_phy_descs + (free_idx * DESC_SIZE * 4)); + desc_addr_set(desc + DESC_BUFPTR, buf); + desc[DESC_EXTSTS] = cpu_to_le32(extsts); + + cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); + cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; + cmdsts |= len; + desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); + + if (!nr_frags) + break; + + buf = skb_frag_dma_map(&dev->pci_dev->dev, frag, 0, + skb_frag_size(frag), DMA_TO_DEVICE); + dprintk("frag: buf=%08Lx page=%08lx offset=%08lx\n", + (long long)buf, (long) page_to_pfn(frag->page), + frag->page_offset); + len = skb_frag_size(frag); + frag++; + nr_frags--; + } + dprintk("done pkt\n"); + + spin_lock_irq(&dev->tx_lock); + dev->tx_skbs[last_idx] = skb; + first_desc[DESC_CMDSTS] |= cpu_to_le32(CMDSTS_OWN); + dev->tx_free_idx = free_idx; + atomic_inc(&dev->nr_tx_skbs); + spin_unlock_irq(&dev->tx_lock); + + kick_tx(dev); + + /* Check again: we may have raced with a tx done irq */ + if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev)) + netif_start_queue(ndev); + + return NETDEV_TX_OK; +} + +static void ns83820_update_stats(struct ns83820 *dev) +{ + struct net_device *ndev = dev->ndev; + u8 __iomem *base = dev->base; + + /* the DP83820 will freeze counters, so we need to read all of them */ + ndev->stats.rx_errors += readl(base + 0x60) & 0xffff; + ndev->stats.rx_crc_errors += readl(base + 0x64) & 0xffff; + ndev->stats.rx_missed_errors += readl(base + 0x68) & 0xffff; + ndev->stats.rx_frame_errors += readl(base + 0x6c) & 0xffff; + /*ndev->stats.rx_symbol_errors +=*/ readl(base + 0x70); + ndev->stats.rx_length_errors += readl(base + 0x74) & 0xffff; + ndev->stats.rx_length_errors += readl(base + 0x78) & 0xffff; + /*ndev->stats.rx_badopcode_errors += */ readl(base + 0x7c); + /*ndev->stats.rx_pause_count += */ readl(base + 0x80); + /*ndev->stats.tx_pause_count += */ readl(base + 0x84); + ndev->stats.tx_carrier_errors += readl(base + 0x88) & 0xff; +} + +static struct net_device_stats *ns83820_get_stats(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + + /* somewhat overkill */ + spin_lock_irq(&dev->misc_lock); + ns83820_update_stats(dev); + spin_unlock_irq(&dev->misc_lock); + + return &ndev->stats; +} + +/* Let ethtool retrieve info */ +static int ns83820_get_link_ksettings(struct net_device *ndev, + struct ethtool_link_ksettings *cmd) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg, tbicr; + int fullduplex = 0; + u32 supported; + + /* + * Here's the list of available ethtool commands from other drivers: + * cmd->advertising = + * ethtool_cmd_speed_set(cmd, ...) + * cmd->duplex = + * cmd->port = 0; + * cmd->phy_address = + * cmd->transceiver = 0; + * cmd->autoneg = + * cmd->maxtxpkt = 0; + * cmd->maxrxpkt = 0; + */ + + /* read current configuration */ + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + readl(dev->base + TANAR); + tbicr = readl(dev->base + TBICR); + + fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0; + + supported = SUPPORTED_Autoneg; + + if (dev->CFG_cache & CFG_TBI_EN) { + /* we have optical interface */ + supported |= SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE; + cmd->base.port = PORT_FIBRE; + } else { + /* we have copper */ + supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_MII; + cmd->base.port = PORT_MII; + } + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + + cmd->base.duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF; + switch (cfg / CFG_SPDSTS0 & 3) { + case 2: + cmd->base.speed = SPEED_1000; + break; + case 1: + cmd->base.speed = SPEED_100; + break; + default: + cmd->base.speed = SPEED_10; + break; + } + cmd->base.autoneg = (tbicr & TBICR_MR_AN_ENABLE) + ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + +/* Let ethool change settings*/ +static int ns83820_set_link_ksettings(struct net_device *ndev, + const struct ethtool_link_ksettings *cmd) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg, tanar; + int have_optical = 0; + int fullduplex = 0; + + /* read current configuration */ + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + tanar = readl(dev->base + TANAR); + + if (dev->CFG_cache & CFG_TBI_EN) { + /* we have optical */ + have_optical = 1; + fullduplex = (tanar & TANAR_FULL_DUP); + + } else { + /* we have copper */ + fullduplex = cfg & CFG_DUPSTS; + } + + spin_lock_irq(&dev->misc_lock); + spin_lock(&dev->tx_lock); + + /* Set duplex */ + if (cmd->base.duplex != fullduplex) { + if (have_optical) { + /*set full duplex*/ + if (cmd->base.duplex == DUPLEX_FULL) { + /* force full duplex */ + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + /* Light up full duplex LED */ + writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, + dev->base + GPIOR); + } else { + /*TODO: set half duplex */ + } + + } else { + /*we have copper*/ + /* TODO: Set duplex for copper cards */ + } + printk(KERN_INFO "%s: Duplex set via ethtool\n", + ndev->name); + } + + /* Set autonegotiation */ + if (1) { + if (cmd->base.autoneg == AUTONEG_ENABLE) { + /* restart auto negotiation */ + writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, + dev->base + TBICR); + writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); + dev->linkstate = LINK_AUTONEGOTIATE; + + printk(KERN_INFO "%s: autoneg enabled via ethtool\n", + ndev->name); + } else { + /* disable auto negotiation */ + writel(0x00000000, dev->base + TBICR); + } + + printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name, + cmd->base.autoneg ? "ENABLED" : "DISABLED"); + } + + phy_intr(ndev); + spin_unlock(&dev->tx_lock); + spin_unlock_irq(&dev->misc_lock); + + return 0; +} +/* end ethtool get/set support -df */ + +static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) +{ + struct ns83820 *dev = PRIV(ndev); + strlcpy(info->driver, "ns83820", sizeof(info->driver)); + strlcpy(info->version, VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(dev->pci_dev), sizeof(info->bus_info)); +} + +static u32 ns83820_get_link(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + return cfg & CFG_LNKSTS ? 1 : 0; +} + +static const struct ethtool_ops ops = { + .get_drvinfo = ns83820_get_drvinfo, + .get_link = ns83820_get_link, + .get_link_ksettings = ns83820_get_link_ksettings, + .set_link_ksettings = ns83820_set_link_ksettings, +}; + +static inline void ns83820_disable_interrupts(struct ns83820 *dev) +{ + writel(0, dev->base + IMR); + writel(0, dev->base + IER); + readl(dev->base + IER); +} + +/* this function is called in irq context from the ISR */ +static void ns83820_mib_isr(struct ns83820 *dev) +{ + unsigned long flags; + spin_lock_irqsave(&dev->misc_lock, flags); + ns83820_update_stats(dev); + spin_unlock_irqrestore(&dev->misc_lock, flags); +} + +static void ns83820_do_isr(struct net_device *ndev, u32 isr); +static irqreturn_t ns83820_irq(int foo, void *data) +{ + struct net_device *ndev = data; + struct ns83820 *dev = PRIV(ndev); + u32 isr; + dprintk("ns83820_irq(%p)\n", ndev); + + dev->ihr = 0; + + isr = readl(dev->base + ISR); + dprintk("irq: %08x\n", isr); + ns83820_do_isr(ndev, isr); + return IRQ_HANDLED; +} + +static void ns83820_do_isr(struct net_device *ndev, u32 isr) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned long flags; + +#ifdef DEBUG + if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) + Dprintk("odd isr? 0x%08x\n", isr); +#endif + + if (ISR_RXIDLE & isr) { + dev->rx_info.idle = 1; + Dprintk("oh dear, we are idle\n"); + ns83820_rx_kick(ndev); + } + + if ((ISR_RXDESC | ISR_RXOK) & isr) { + prefetch(dev->rx_info.next_rx_desc); + + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + + tasklet_schedule(&dev->rx_tasklet); + //rx_irq(ndev); + //writel(4, dev->base + IHR); + } + + if ((ISR_RXIDLE | ISR_RXORN | ISR_RXDESC | ISR_RXOK | ISR_RXERR) & isr) + ns83820_rx_kick(ndev); + + if (unlikely(ISR_RXSOVR & isr)) { + //printk("overrun: rxsovr\n"); + ndev->stats.rx_fifo_errors++; + } + + if (unlikely(ISR_RXORN & isr)) { + //printk("overrun: rxorn\n"); + ndev->stats.rx_fifo_errors++; + } + + if ((ISR_RXRCMP & isr) && dev->rx_info.up) + writel(CR_RXE, dev->base + CR); + + if (ISR_TXIDLE & isr) { + u32 txdp; + txdp = readl(dev->base + TXDP); + dprintk("txdp: %08x\n", txdp); + txdp -= dev->tx_phy_descs; + dev->tx_idx = txdp / (DESC_SIZE * 4); + if (dev->tx_idx >= NR_TX_DESC) { + printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name); + dev->tx_idx = 0; + } + /* The may have been a race between a pci originated read + * and the descriptor update from the cpu. Just in case, + * kick the transmitter if the hardware thinks it is on a + * different descriptor than we are. + */ + if (dev->tx_idx != dev->tx_free_idx) + kick_tx(dev); + } + + /* Defer tx ring processing until more than a minimum amount of + * work has accumulated + */ + if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { + spin_lock_irqsave(&dev->tx_lock, flags); + do_tx_done(ndev); + spin_unlock_irqrestore(&dev->tx_lock, flags); + + /* Disable TxOk if there are no outstanding tx packets. + */ + if ((dev->tx_done_idx == dev->tx_free_idx) && + (dev->IMR_cache & ISR_TXOK)) { + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~ISR_TXOK; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + } + } + + /* The TxIdle interrupt can come in before the transmit has + * completed. Normally we reap packets off of the combination + * of TxDesc and TxIdle and leave TxOk disabled (since it + * occurs on every packet), but when no further irqs of this + * nature are expected, we must enable TxOk. + */ + if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache |= ISR_TXOK; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + } + + /* MIB interrupt: one of the statistics counters is about to overflow */ + if (unlikely(ISR_MIB & isr)) + ns83820_mib_isr(dev); + + /* PHY: Link up/down/negotiation state change */ + if (unlikely(ISR_PHY & isr)) + phy_intr(ndev); + +#if 0 /* Still working on the interrupt mitigation strategy */ + if (dev->ihr) + writel(dev->ihr, dev->base + IHR); +#endif +} + +static void ns83820_do_reset(struct ns83820 *dev, u32 which) +{ + Dprintk("resetting chip...\n"); + writel(which, dev->base + CR); + do { + schedule(); + } while (readl(dev->base + CR) & which); + Dprintk("okay!\n"); +} + +static int ns83820_stop(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + + /* FIXME: protect against interrupt handler? */ + del_timer_sync(&dev->tx_watchdog); + + ns83820_disable_interrupts(dev); + + dev->rx_info.up = 0; + synchronize_irq(dev->pci_dev->irq); + + ns83820_do_reset(dev, CR_RST); + + synchronize_irq(dev->pci_dev->irq); + + spin_lock_irq(&dev->misc_lock); + dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK); + spin_unlock_irq(&dev->misc_lock); + + ns83820_cleanup_rx(dev); + ns83820_cleanup_tx(dev); + + return 0; +} + +static void ns83820_tx_timeout(struct net_device *ndev, unsigned int txqueue) +{ + struct ns83820 *dev = PRIV(ndev); + u32 tx_done_idx; + __le32 *desc; + unsigned long flags; + + spin_lock_irqsave(&dev->tx_lock, flags); + + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + ndev->name, + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + +#if defined(DEBUG) + { + u32 isr; + isr = readl(dev->base + ISR); + printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache); + ns83820_do_isr(ndev, isr); + } +#endif + + do_tx_done(ndev); + + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + ndev->name, + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +static void ns83820_tx_watch(struct timer_list *t) +{ + struct ns83820 *dev = from_timer(dev, t, tx_watchdog); + struct net_device *ndev = dev->ndev; + +#if defined(DEBUG) + printk("ns83820_tx_watch: %u %u %d\n", + dev->tx_done_idx, dev->tx_free_idx, atomic_read(&dev->nr_tx_skbs) + ); +#endif + + if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) && + dev->tx_done_idx != dev->tx_free_idx) { + printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n", + ndev->name, + dev->tx_done_idx, dev->tx_free_idx, + atomic_read(&dev->nr_tx_skbs)); + ns83820_tx_timeout(ndev, UINT_MAX); + } + + mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); +} + +static int ns83820_open(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + u32 desc; + int ret; + + dprintk("ns83820_open\n"); + + writel(0, dev->base + PQCR); + + ret = ns83820_setup_rx(ndev); + if (ret) + goto failed; + + memset(dev->tx_descs, 0, 4 * NR_TX_DESC * DESC_SIZE); + for (i=0; i<NR_TX_DESC; i++) { + dev->tx_descs[(i * DESC_SIZE) + DESC_LINK] + = cpu_to_le32( + dev->tx_phy_descs + + ((i+1) % NR_TX_DESC) * DESC_SIZE * 4); + } + + dev->tx_idx = 0; + dev->tx_done_idx = 0; + desc = dev->tx_phy_descs; + writel(0, dev->base + TXDP_HI); + writel(desc, dev->base + TXDP); + + timer_setup(&dev->tx_watchdog, ns83820_tx_watch, 0); + mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); + + netif_start_queue(ndev); /* FIXME: wait for phy to come up */ + + return 0; + +failed: + ns83820_stop(ndev); + return ret; +} + +static void ns83820_getmac(struct ns83820 *dev, u8 *mac) +{ + unsigned i; + for (i=0; i<3; i++) { + u32 data; + + /* Read from the perfect match memory: this is loaded by + * the chip from the EEPROM via the EELOAD self test. + */ + writel(i*2, dev->base + RFCR); + data = readl(dev->base + RFDR); + + *mac++ = data; + *mac++ = data >> 8; + } +} + +static void ns83820_set_multicast(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u8 __iomem *rfcr = dev->base + RFCR; + u32 and_mask = 0xffffffff; + u32 or_mask = 0; + u32 val; + + if (ndev->flags & IFF_PROMISC) + or_mask |= RFCR_AAU | RFCR_AAM; + else + and_mask &= ~(RFCR_AAU | RFCR_AAM); + + if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev)) + or_mask |= RFCR_AAM; + else + and_mask &= ~RFCR_AAM; + + spin_lock_irq(&dev->misc_lock); + val = (readl(rfcr) & and_mask) | or_mask; + /* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */ + writel(val & ~RFCR_RFEN, rfcr); + writel(val, rfcr); + spin_unlock_irq(&dev->misc_lock); +} + +static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enable, u32 done, u32 fail) +{ + struct ns83820 *dev = PRIV(ndev); + int timed_out = 0; + unsigned long start; + u32 status; + int loops = 0; + + dprintk("%s: start %s\n", ndev->name, name); + + start = jiffies; + + writel(enable, dev->base + PTSCR); + for (;;) { + loops++; + status = readl(dev->base + PTSCR); + if (!(status & enable)) + break; + if (status & done) + break; + if (status & fail) + break; + if (time_after_eq(jiffies, start + HZ)) { + timed_out = 1; + break; + } + schedule_timeout_uninterruptible(1); + } + + if (status & fail) + printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n", + ndev->name, name, status, fail); + else if (timed_out) + printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n", + ndev->name, name, status); + + dprintk("%s: done %s in %d loops\n", ndev->name, name, loops); +} + +#ifdef PHY_CODE_IS_FINISHED +static void ns83820_mii_write_bit(struct ns83820 *dev, int bit) +{ + /* drive MDC low */ + dev->MEAR_cache &= ~MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* enable output, set bit */ + dev->MEAR_cache |= MEAR_MDDIR; + if (bit) + dev->MEAR_cache |= MEAR_MDIO; + else + dev->MEAR_cache &= ~MEAR_MDIO; + + /* set the output bit */ + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ + udelay(1); + + /* drive MDC high causing the data bit to be latched */ + dev->MEAR_cache |= MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait again... */ + udelay(1); +} + +static int ns83820_mii_read_bit(struct ns83820 *dev) +{ + int bit; + + /* drive MDC low, disable output */ + dev->MEAR_cache &= ~MEAR_MDC; + dev->MEAR_cache &= ~MEAR_MDDIR; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ + udelay(1); + + /* drive MDC high causing the data bit to be latched */ + bit = (readl(dev->base + MEAR) & MEAR_MDIO) ? 1 : 0; + dev->MEAR_cache |= MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + + /* Wait again... */ + udelay(1); + + return bit; +} + +static unsigned ns83820_mii_read_reg(struct ns83820 *dev, unsigned phy, unsigned reg) +{ + unsigned data = 0; + int i; + + /* read some garbage so that we eventually sync up */ + for (i=0; i<64; i++) + ns83820_mii_read_bit(dev); + + ns83820_mii_write_bit(dev, 0); /* start */ + ns83820_mii_write_bit(dev, 1); + ns83820_mii_write_bit(dev, 1); /* opcode read */ + ns83820_mii_write_bit(dev, 0); + + /* write out the phy address: 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, phy & (0x10 >> i)); + + /* write out the register address, 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, reg & (0x10 >> i)); + + ns83820_mii_read_bit(dev); /* turn around cycles */ + ns83820_mii_read_bit(dev); + + /* read in the register data, 16 bits msb first */ + for (i=0; i<16; i++) { + data <<= 1; + data |= ns83820_mii_read_bit(dev); + } + + return data; +} + +static unsigned ns83820_mii_write_reg(struct ns83820 *dev, unsigned phy, unsigned reg, unsigned data) +{ + int i; + + /* read some garbage so that we eventually sync up */ + for (i=0; i<64; i++) + ns83820_mii_read_bit(dev); + + ns83820_mii_write_bit(dev, 0); /* start */ + ns83820_mii_write_bit(dev, 1); + ns83820_mii_write_bit(dev, 0); /* opcode read */ + ns83820_mii_write_bit(dev, 1); + + /* write out the phy address: 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, phy & (0x10 >> i)); + + /* write out the register address, 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, reg & (0x10 >> i)); + + ns83820_mii_read_bit(dev); /* turn around cycles */ + ns83820_mii_read_bit(dev); + + /* read in the register data, 16 bits msb first */ + for (i=0; i<16; i++) + ns83820_mii_write_bit(dev, (data >> (15 - i)) & 1); + + return data; +} + +static void ns83820_probe_phy(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + int j; + unsigned a, b; + + for (j = 0; j < 0x16; j += 4) { + dprintk("%s: [0x%02x] %04x %04x %04x %04x\n", + ndev->name, j, + ns83820_mii_read_reg(dev, 1, 0 + j), + ns83820_mii_read_reg(dev, 1, 1 + j), + ns83820_mii_read_reg(dev, 1, 2 + j), + ns83820_mii_read_reg(dev, 1, 3 + j) + ); + } + + /* read firmware version: memory addr is 0x8402 and 0x8403 */ + ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); + ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); + a = ns83820_mii_read_reg(dev, 1, 0x1d); + + ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); + ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); + b = ns83820_mii_read_reg(dev, 1, 0x1d); + dprintk("version: 0x%04x 0x%04x\n", a, b); +} +#endif + +static const struct net_device_ops netdev_ops = { + .ndo_open = ns83820_open, + .ndo_stop = ns83820_stop, + .ndo_start_xmit = ns83820_hard_start_xmit, + .ndo_get_stats = ns83820_get_stats, + .ndo_set_rx_mode = ns83820_set_multicast, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_tx_timeout = ns83820_tx_timeout, +}; + +static int ns83820_init_one(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + struct net_device *ndev; + struct ns83820 *dev; + long addr; + int err; + int using_dac = 0; + + /* See if we can set the dma mask early on; failure is fatal. */ + if (sizeof(dma_addr_t) == 8 && + !dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64))) { + using_dac = 1; + } else if (!dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) { + using_dac = 0; + } else { + dev_warn(&pci_dev->dev, "dma_set_mask failed!\n"); + return -ENODEV; + } + + ndev = alloc_etherdev(sizeof(struct ns83820)); + err = -ENOMEM; + if (!ndev) + goto out; + + dev = PRIV(ndev); + dev->ndev = ndev; + + spin_lock_init(&dev->rx_info.lock); + spin_lock_init(&dev->tx_lock); + spin_lock_init(&dev->misc_lock); + dev->pci_dev = pci_dev; + + SET_NETDEV_DEV(ndev, &pci_dev->dev); + + INIT_WORK(&dev->tq_refill, queue_refill); + tasklet_setup(&dev->rx_tasklet, rx_action); + + err = pci_enable_device(pci_dev); + if (err) { + dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); + goto out_free; + } + + pci_set_master(pci_dev); + addr = pci_resource_start(pci_dev, 1); + dev->base = ioremap(addr, PAGE_SIZE); + dev->tx_descs = dma_alloc_coherent(&pci_dev->dev, + 4 * DESC_SIZE * NR_TX_DESC, + &dev->tx_phy_descs, GFP_KERNEL); + dev->rx_info.descs = dma_alloc_coherent(&pci_dev->dev, + 4 * DESC_SIZE * NR_RX_DESC, + &dev->rx_info.phy_descs, GFP_KERNEL); + err = -ENOMEM; + if (!dev->base || !dev->tx_descs || !dev->rx_info.descs) + goto out_disable; + + dprintk("%p: %08lx %p: %08lx\n", + dev->tx_descs, (long)dev->tx_phy_descs, + dev->rx_info.descs, (long)dev->rx_info.phy_descs); + + ns83820_disable_interrupts(dev); + + dev->IMR_cache = 0; + + err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, + DRV_NAME, ndev); + if (err) { + dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", + pci_dev->irq, err); + goto out_disable; + } + + /* + * FIXME: we are holding rtnl_lock() over obscenely long area only + * because some of the setup code uses dev->name. It's Wrong(tm) - + * we should be using driver-specific names for all that stuff. + * For now that will do, but we really need to come back and kill + * most of the dev_alloc_name() users later. + */ + rtnl_lock(); + err = dev_alloc_name(ndev, ndev->name); + if (err < 0) { + dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); + goto out_free_irq; + } + + printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n", + ndev->name, le32_to_cpu(readl(dev->base + 0x22c)), + pci_dev->subsystem_vendor, pci_dev->subsystem_device); + + ndev->netdev_ops = &netdev_ops; + ndev->ethtool_ops = &ops; + ndev->watchdog_timeo = 5 * HZ; + pci_set_drvdata(pci_dev, ndev); + + ns83820_do_reset(dev, CR_RST); + + /* Must reset the ram bist before running it */ + writel(PTSCR_RBIST_RST, dev->base + PTSCR); + ns83820_run_bist(ndev, "sram bist", PTSCR_RBIST_EN, + PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL); + ns83820_run_bist(ndev, "eeprom bist", PTSCR_EEBIST_EN, 0, + PTSCR_EEBIST_FAIL); + ns83820_run_bist(ndev, "eeprom load", PTSCR_EELOAD_EN, 0, 0); + + /* I love config registers */ + dev->CFG_cache = readl(dev->base + CFG); + + if ((dev->CFG_cache & CFG_PCI64_DET)) { + printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n", + ndev->name); + /*dev->CFG_cache |= CFG_DATA64_EN;*/ + if (!(dev->CFG_cache & CFG_DATA64_EN)) + printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n", + ndev->name); + } else + dev->CFG_cache &= ~(CFG_DATA64_EN); + + dev->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS | + CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 | + CFG_M64ADDR); + dev->CFG_cache |= CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS | + CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL; + dev->CFG_cache |= CFG_REQALG; + dev->CFG_cache |= CFG_POW; + dev->CFG_cache |= CFG_TMRTEST; + + /* When compiled with 64 bit addressing, we must always enable + * the 64 bit descriptor format. + */ + if (sizeof(dma_addr_t) == 8) + dev->CFG_cache |= CFG_M64ADDR; + if (using_dac) + dev->CFG_cache |= CFG_T64ADDR; + + /* Big endian mode does not seem to do what the docs suggest */ + dev->CFG_cache &= ~CFG_BEM; + + /* setup optical transceiver if we have one */ + if (dev->CFG_cache & CFG_TBI_EN) { + printk(KERN_INFO "%s: enabling optical transceiver\n", + ndev->name); + writel(readl(dev->base + GPIOR) | 0x3e8, dev->base + GPIOR); + + /* setup auto negotiation feature advertisement */ + writel(readl(dev->base + TANAR) + | TANAR_HALF_DUP | TANAR_FULL_DUP, + dev->base + TANAR); + + /* start auto negotiation */ + writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, + dev->base + TBICR); + writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); + dev->linkstate = LINK_AUTONEGOTIATE; + + dev->CFG_cache |= CFG_MODE_1000; + } + + writel(dev->CFG_cache, dev->base + CFG); + dprintk("CFG: %08x\n", dev->CFG_cache); + + if (reset_phy) { + printk(KERN_INFO "%s: resetting phy\n", ndev->name); + writel(dev->CFG_cache | CFG_PHY_RST, dev->base + CFG); + msleep(10); + writel(dev->CFG_cache, dev->base + CFG); + } + +#if 0 /* Huh? This sets the PCI latency register. Should be done via + * the PCI layer. FIXME. + */ + if (readl(dev->base + SRR)) + writel(readl(dev->base+0x20c) | 0xfe00, dev->base + 0x20c); +#endif + + /* Note! The DMA burst size interacts with packet + * transmission, such that the largest packet that + * can be transmitted is 8192 - FLTH - burst size. + * If only the transmit fifo was larger... + */ + /* Ramit : 1024 DMA is not a good idea, it ends up banging + * some DELL and COMPAQ SMP systems */ + writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512 + | ((1600 / 32) * 0x100), + dev->base + TXCFG); + + /* Flush the interrupt holdoff timer */ + writel(0x000, dev->base + IHR); + writel(0x100, dev->base + IHR); + writel(0x000, dev->base + IHR); + + /* Set Rx to full duplex, don't accept runt, errored, long or length + * range errored packets. Use 512 byte DMA. + */ + /* Ramit : 1024 DMA is not a good idea, it ends up banging + * some DELL and COMPAQ SMP systems + * Turn on ALP, only we are accpeting Jumbo Packets */ + writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD + | RXCFG_STRIPCRC + //| RXCFG_ALP + | (RXCFG_MXDMA512) | 0, dev->base + RXCFG); + + /* Disable priority queueing */ + writel(0, dev->base + PQCR); + + /* Enable IP checksum validation and detetion of VLAN headers. + * Note: do not set the reject options as at least the 0x102 + * revision of the chip does not properly accept IP fragments + * at least for UDP. + */ + /* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since + * the MAC it calculates the packetsize AFTER stripping the VLAN + * header, and if a VLAN Tagged packet of 64 bytes is received (like + * a ping with a VLAN header) then the card, strips the 4 byte VLAN + * tag and then checks the packet size, so if RXCFG_ARP is not enabled, + * it discrards it!. These guys...... + * also turn on tag stripping if hardware acceleration is enabled + */ +#ifdef NS83820_VLAN_ACCEL_SUPPORT +#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN) +#else +#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN) +#endif + writel(VRCR_INIT_VALUE, dev->base + VRCR); + + /* Enable per-packet TCP/UDP/IP checksumming + * and per packet vlan tag insertion if + * vlan hardware acceleration is enabled + */ +#ifdef NS83820_VLAN_ACCEL_SUPPORT +#define VTCR_INIT_VALUE (VTCR_PPCHK|VTCR_VPPTI) +#else +#define VTCR_INIT_VALUE VTCR_PPCHK +#endif + writel(VTCR_INIT_VALUE, dev->base + VTCR); + + /* Ramit : Enable async and sync pause frames */ + /* writel(0, dev->base + PCR); */ + writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K | + PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT), + dev->base + PCR); + + /* Disable Wake On Lan */ + writel(0, dev->base + WCSR); + + ns83820_getmac(dev, ndev->dev_addr); + + /* Yes, we support dumb IP checksum on transmit */ + ndev->features |= NETIF_F_SG; + ndev->features |= NETIF_F_IP_CSUM; + + ndev->min_mtu = 0; + +#ifdef NS83820_VLAN_ACCEL_SUPPORT + /* We also support hardware vlan acceleration */ + ndev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; +#endif + + if (using_dac) { + printk(KERN_INFO "%s: using 64 bit addressing.\n", + ndev->name); + ndev->features |= NETIF_F_HIGHDMA; + } + + printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n", + ndev->name, + (unsigned)readl(dev->base + SRR) >> 8, + (unsigned)readl(dev->base + SRR) & 0xff, + ndev->dev_addr, addr, pci_dev->irq, + (ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg" + ); + +#ifdef PHY_CODE_IS_FINISHED + ns83820_probe_phy(ndev); +#endif + + err = register_netdevice(ndev); + if (err) { + printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err); + goto out_cleanup; + } + rtnl_unlock(); + + return 0; + +out_cleanup: + ns83820_disable_interrupts(dev); /* paranoia */ +out_free_irq: + rtnl_unlock(); + free_irq(pci_dev->irq, ndev); +out_disable: + if (dev->base) + iounmap(dev->base); + dma_free_coherent(&pci_dev->dev, 4 * DESC_SIZE * NR_TX_DESC, + dev->tx_descs, dev->tx_phy_descs); + dma_free_coherent(&pci_dev->dev, 4 * DESC_SIZE * NR_RX_DESC, + dev->rx_info.descs, dev->rx_info.phy_descs); + pci_disable_device(pci_dev); +out_free: + free_netdev(ndev); +out: + return err; +} + +static void ns83820_remove_one(struct pci_dev *pci_dev) +{ + struct net_device *ndev = pci_get_drvdata(pci_dev); + struct ns83820 *dev = PRIV(ndev); /* ok even if NULL */ + + if (!ndev) /* paranoia */ + return; + + ns83820_disable_interrupts(dev); /* paranoia */ + + unregister_netdev(ndev); + free_irq(dev->pci_dev->irq, ndev); + iounmap(dev->base); + dma_free_coherent(&dev->pci_dev->dev, 4 * DESC_SIZE * NR_TX_DESC, + dev->tx_descs, dev->tx_phy_descs); + dma_free_coherent(&dev->pci_dev->dev, 4 * DESC_SIZE * NR_RX_DESC, + dev->rx_info.descs, dev->rx_info.phy_descs); + pci_disable_device(dev->pci_dev); + free_netdev(ndev); +} + +static const struct pci_device_id ns83820_pci_tbl[] = { + { 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, }, + { 0, }, +}; + +static struct pci_driver driver = { + .name = "ns83820", + .id_table = ns83820_pci_tbl, + .probe = ns83820_init_one, + .remove = ns83820_remove_one, +#if 0 /* FIXME: implement */ + .suspend = , + .resume = , +#endif +}; + + +static int __init ns83820_init(void) +{ + printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); + return pci_register_driver(&driver); +} + +static void __exit ns83820_exit(void) +{ + pci_unregister_driver(&driver); +} + +MODULE_AUTHOR("Benjamin LaHaise <bcrl@kvack.org>"); +MODULE_DESCRIPTION("National Semiconductor DP83820 10/100/1000 driver"); +MODULE_LICENSE("GPL"); + +MODULE_DEVICE_TABLE(pci, ns83820_pci_tbl); + +module_param(lnksts, int, 0); +MODULE_PARM_DESC(lnksts, "Polarity of LNKSTS bit"); + +module_param(ihr, int, 0); +MODULE_PARM_DESC(ihr, "Time in 100 us increments to delay interrupts (range 0-127)"); + +module_param(reset_phy, int, 0); +MODULE_PARM_DESC(reset_phy, "Set to 1 to reset the PHY on startup"); + +module_init(ns83820_init); +module_exit(ns83820_exit); diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c new file mode 100644 index 000000000..825356ee3 --- /dev/null +++ b/drivers/net/ethernet/natsemi/sonic.c @@ -0,0 +1,855 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, added zero-copy buffer handling, and + * (from the mac68k project) introduced dhd's support for 16-bit cards. + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * Core code included by system sonic drivers + * + * And... partially rewritten again by David Huggins-Daines in order + * to cope with screwed up Macintosh NICs that may or may not use + * 16-bit DMA. + * + * (C) 1999 David Huggins-Daines <dhd@debian.org> + * + */ + +/* + * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook, + * National Semiconductors data sheet for the DP83932B Sonic Ethernet + * controller, and the files "8390.c" and "skeleton.c" in this directory. + * + * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi + * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also + * the NetBSD file "sys/arch/mac68k/dev/if_sn.c". + */ + +static unsigned int version_printed; + +static int sonic_debug = -1; +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "debug message level"); + +static void sonic_msg_init(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + + lp->msg_enable = netif_msg_init(sonic_debug, 0); + + if (version_printed++ == 0) + netif_dbg(lp, drv, dev, "%s", version); +} + +static int sonic_alloc_descriptors(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + + /* Allocate a chunk of memory for the descriptors. Note that this + * must not cross a 64K boundary. It is smaller than one page which + * means that page alignment is a sufficient condition. + */ + lp->descriptors = + dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * + SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL); + + if (!lp->descriptors) + return -ENOMEM; + + lp->cda = lp->descriptors; + lp->tda = lp->cda + SIZEOF_SONIC_CDA * + SONIC_BUS_SCALE(lp->dma_bitmode); + lp->rda = lp->tda + SIZEOF_SONIC_TD * SONIC_NUM_TDS * + SONIC_BUS_SCALE(lp->dma_bitmode); + lp->rra = lp->rda + SIZEOF_SONIC_RD * SONIC_NUM_RDS * + SONIC_BUS_SCALE(lp->dma_bitmode); + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + SIZEOF_SONIC_CDA * + SONIC_BUS_SCALE(lp->dma_bitmode); + lp->rda_laddr = lp->tda_laddr + SIZEOF_SONIC_TD * SONIC_NUM_TDS * + SONIC_BUS_SCALE(lp->dma_bitmode); + lp->rra_laddr = lp->rda_laddr + SIZEOF_SONIC_RD * SONIC_NUM_RDS * + SONIC_BUS_SCALE(lp->dma_bitmode); + + return 0; +} + +/* + * Open/initialize the SONIC controller. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ +static int sonic_open(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + + netif_dbg(lp, ifup, dev, "%s: initializing sonic driver\n", __func__); + + spin_lock_init(&lp->lock); + + for (i = 0; i < SONIC_NUM_RRS; i++) { + struct sk_buff *skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2); + if (skb == NULL) { + while(i > 0) { /* free any that were allocated successfully */ + i--; + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't allocate receive buffers\n", + dev->name); + return -ENOMEM; + } + /* align IP header unless DMA requires otherwise */ + if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(skb, 2); + lp->rx_skb[i] = skb; + } + + for (i = 0; i < SONIC_NUM_RRS; i++) { + dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(lp->device, laddr)) { + while(i > 0) { /* free any that were mapped successfully */ + i--; + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + for (i = 0; i < SONIC_NUM_RRS; i++) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't map rx DMA buffers\n", + dev->name); + return -ENOMEM; + } + lp->rx_laddr[i] = laddr; + } + + /* + * Initialize the SONIC + */ + sonic_init(dev, true); + + netif_start_queue(dev); + + netif_dbg(lp, ifup, dev, "%s: Initialization done\n", __func__); + + return 0; +} + +/* Wait for the SONIC to become idle. */ +static void sonic_quiesce(struct net_device *dev, u16 mask, bool may_sleep) +{ + struct sonic_local * __maybe_unused lp = netdev_priv(dev); + int i; + u16 bits; + + for (i = 0; i < 1000; ++i) { + bits = SONIC_READ(SONIC_CMD) & mask; + if (!bits) + return; + if (!may_sleep) + udelay(20); + else + usleep_range(100, 200); + } + WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits); +} + +/* + * Close the SONIC device + */ +static int sonic_close(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + + netif_dbg(lp, ifdown, dev, "%s\n", __func__); + + netif_stop_queue(dev); + + /* + * stop the SONIC, disable interrupts + */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS); + sonic_quiesce(dev, SONIC_CR_ALL, true); + + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + /* unmap and free skbs that haven't been transmitted */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + + /* unmap and free the receive buffers */ + for (i = 0; i < SONIC_NUM_RRS; i++) { + if(lp->rx_laddr[i]) { + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + if(lp->rx_skb[i]) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + } + + return 0; +} + +static void sonic_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + /* + * put the Sonic into software-reset mode and + * disable all interrupts before releasing DMA buffers + */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS); + sonic_quiesce(dev, SONIC_CR_ALL, false); + + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + /* We could resend the original skbs. Easier to re-initialise. */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + /* Try to restart the adaptor. */ + sonic_init(dev, false); + lp->stats.tx_errors++; + netif_trans_update(dev); /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* + * transmit packet + * + * Appends new TD during transmission thus avoiding any TX interrupts + * until we run out of TDs. + * This routine interacts closely with the ISR in that it may, + * set tx_skb[i] + * reset the status flags of the new TD + * set and reset EOL flags + * stop the tx queue + * The ISR interacts with this routine in various ways. It may, + * reset tx_skb[i] + * test the EOL and status flags of the TDs + * wake the tx queue + * Concurrently with all of this, the SONIC is potentially writing to + * the status flags of the TDs. + */ + +static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + dma_addr_t laddr; + int length; + int entry; + unsigned long flags; + + netif_dbg(lp, tx_queued, dev, "%s: skb=%p\n", __func__, skb); + + length = skb->len; + if (length < ETH_ZLEN) { + if (skb_padto(skb, ETH_ZLEN)) + return NETDEV_TX_OK; + length = ETH_ZLEN; + } + + /* + * Map the packet data into the logical DMA address space + */ + + laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE); + if (dma_mapping_error(lp->device, laddr)) { + pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + spin_lock_irqsave(&lp->lock, flags); + + entry = (lp->eol_tx + 1) & SONIC_TDS_MASK; + + sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */ + sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length); + sonic_tda_put(dev, entry, SONIC_TD_LINK, + sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL); + + sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK, ~SONIC_EOL & + sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK)); + + netif_dbg(lp, tx_queued, dev, "%s: issuing Tx command\n", __func__); + + SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); + + lp->tx_len[entry] = length; + lp->tx_laddr[entry] = laddr; + lp->tx_skb[entry] = skb; + + lp->eol_tx = entry; + + entry = (entry + 1) & SONIC_TDS_MASK; + if (lp->tx_skb[entry]) { + /* The ring is full, the ISR has yet to process the next TD. */ + netif_dbg(lp, tx_queued, dev, "%s: stopping queue\n", __func__); + netif_stop_queue(dev); + /* after this packet, wait for ISR to free up some TDAs */ + } + + spin_unlock_irqrestore(&lp->lock, flags); + + return NETDEV_TX_OK; +} + +/* + * The typical workload of the driver: + * Handle the network interface interrupts. + */ +static irqreturn_t sonic_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct sonic_local *lp = netdev_priv(dev); + int status; + unsigned long flags; + + /* The lock has two purposes. Firstly, it synchronizes sonic_interrupt() + * with sonic_send_packet() so that the two functions can share state. + * Secondly, it makes sonic_interrupt() re-entrant, as that is required + * by macsonic which must use two IRQs with different priority levels. + */ + spin_lock_irqsave(&lp->lock, flags); + + status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT; + if (!status) { + spin_unlock_irqrestore(&lp->lock, flags); + + return IRQ_NONE; + } + + do { + SONIC_WRITE(SONIC_ISR, status); /* clear the interrupt(s) */ + + if (status & SONIC_INT_PKTRX) { + netif_dbg(lp, intr, dev, "%s: packet rx\n", __func__); + sonic_rx(dev); /* got packet(s) */ + } + + if (status & SONIC_INT_TXDN) { + int entry = lp->cur_tx; + int td_status; + int freed_some = 0; + + /* The state of a Transmit Descriptor may be inferred + * from { tx_skb[entry], td_status } as follows. + * { clear, clear } => the TD has never been used + * { set, clear } => the TD was handed to SONIC + * { set, set } => the TD was handed back + * { clear, set } => the TD is available for re-use + */ + + netif_dbg(lp, intr, dev, "%s: tx done\n", __func__); + + while (lp->tx_skb[entry] != NULL) { + if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0) + break; + + if (td_status & SONIC_TCR_PTX) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE); + } else { + if (td_status & (SONIC_TCR_EXD | + SONIC_TCR_EXC | SONIC_TCR_BCM)) + lp->stats.tx_aborted_errors++; + if (td_status & + (SONIC_TCR_NCRS | SONIC_TCR_CRLS)) + lp->stats.tx_carrier_errors++; + if (td_status & SONIC_TCR_OWC) + lp->stats.tx_window_errors++; + if (td_status & SONIC_TCR_FU) + lp->stats.tx_fifo_errors++; + } + + /* We must free the original skb */ + dev_consume_skb_irq(lp->tx_skb[entry]); + lp->tx_skb[entry] = NULL; + /* and unmap DMA buffer */ + dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE); + lp->tx_laddr[entry] = (dma_addr_t)0; + freed_some = 1; + + if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) { + entry = (entry + 1) & SONIC_TDS_MASK; + break; + } + entry = (entry + 1) & SONIC_TDS_MASK; + } + + if (freed_some || lp->tx_skb[entry] == NULL) + netif_wake_queue(dev); /* The ring is no longer full */ + lp->cur_tx = entry; + } + + /* + * check error conditions + */ + if (status & SONIC_INT_RFO) { + netif_dbg(lp, rx_err, dev, "%s: rx fifo overrun\n", + __func__); + } + if (status & SONIC_INT_RDE) { + netif_dbg(lp, rx_err, dev, "%s: rx descriptors exhausted\n", + __func__); + } + if (status & SONIC_INT_RBAE) { + netif_dbg(lp, rx_err, dev, "%s: rx buffer area exceeded\n", + __func__); + } + + /* counter overruns; all counters are 16bit wide */ + if (status & SONIC_INT_FAE) + lp->stats.rx_frame_errors += 65536; + if (status & SONIC_INT_CRC) + lp->stats.rx_crc_errors += 65536; + if (status & SONIC_INT_MP) + lp->stats.rx_missed_errors += 65536; + + /* transmit error */ + if (status & SONIC_INT_TXER) { + u16 tcr = SONIC_READ(SONIC_TCR); + + netif_dbg(lp, tx_err, dev, "%s: TXER intr, TCR %04x\n", + __func__, tcr); + + if (tcr & (SONIC_TCR_EXD | SONIC_TCR_EXC | + SONIC_TCR_FU | SONIC_TCR_BCM)) { + /* Aborted transmission. Try again. */ + netif_stop_queue(dev); + SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); + } + } + + /* bus retry */ + if (status & SONIC_INT_BR) { + printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n", + dev->name); + /* ... to help debug DMA problems causing endless interrupts. */ + /* Bounce the eth interface to turn on the interrupt again. */ + SONIC_WRITE(SONIC_IMR, 0); + } + + status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT; + } while (status); + + spin_unlock_irqrestore(&lp->lock, flags); + + return IRQ_HANDLED; +} + +/* Return the array index corresponding to a given Receive Buffer pointer. */ +static int index_from_addr(struct sonic_local *lp, dma_addr_t addr, + unsigned int last) +{ + unsigned int i = last; + + do { + i = (i + 1) & SONIC_RRS_MASK; + if (addr == lp->rx_laddr[i]) + return i; + } while (i != last); + + return -ENOENT; +} + +/* Allocate and map a new skb to be used as a receive buffer. */ +static bool sonic_alloc_rb(struct net_device *dev, struct sonic_local *lp, + struct sk_buff **new_skb, dma_addr_t *new_addr) +{ + *new_skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2); + if (!*new_skb) + return false; + + if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(*new_skb, 2); + + *new_addr = dma_map_single(lp->device, skb_put(*new_skb, SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(lp->device, *new_addr)) { + dev_kfree_skb(*new_skb); + *new_skb = NULL; + return false; + } + + return true; +} + +/* Place a new receive resource in the Receive Resource Area and update RWP. */ +static void sonic_update_rra(struct net_device *dev, struct sonic_local *lp, + dma_addr_t old_addr, dma_addr_t new_addr) +{ + unsigned int entry = sonic_rr_entry(dev, SONIC_READ(SONIC_RWP)); + unsigned int end = sonic_rr_entry(dev, SONIC_READ(SONIC_RRP)); + u32 buf; + + /* The resources in the range [RRP, RWP) belong to the SONIC. This loop + * scans the other resources in the RRA, those in the range [RWP, RRP). + */ + do { + buf = (sonic_rra_get(dev, entry, SONIC_RR_BUFADR_H) << 16) | + sonic_rra_get(dev, entry, SONIC_RR_BUFADR_L); + + if (buf == old_addr) + break; + + entry = (entry + 1) & SONIC_RRS_MASK; + } while (entry != end); + + WARN_ONCE(buf != old_addr, "failed to find resource!\n"); + + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, new_addr >> 16); + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, new_addr & 0xffff); + + entry = (entry + 1) & SONIC_RRS_MASK; + + SONIC_WRITE(SONIC_RWP, sonic_rr_addr(dev, entry)); +} + +/* + * We have a good packet(s), pass it/them up the network stack. + */ +static void sonic_rx(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int entry = lp->cur_rx; + int prev_entry = lp->eol_rx; + bool rbe = false; + + while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) { + u16 status = sonic_rda_get(dev, entry, SONIC_RD_STATUS); + + /* If the RD has LPKT set, the chip has finished with the RB */ + if ((status & SONIC_RCR_PRX) && (status & SONIC_RCR_LPKT)) { + struct sk_buff *new_skb; + dma_addr_t new_laddr; + u32 addr = (sonic_rda_get(dev, entry, + SONIC_RD_PKTPTR_H) << 16) | + sonic_rda_get(dev, entry, SONIC_RD_PKTPTR_L); + int i = index_from_addr(lp, addr, entry); + + if (i < 0) { + WARN_ONCE(1, "failed to find buffer!\n"); + break; + } + + if (sonic_alloc_rb(dev, lp, &new_skb, &new_laddr)) { + struct sk_buff *used_skb = lp->rx_skb[i]; + int pkt_len; + + /* Pass the used buffer up the stack */ + dma_unmap_single(lp->device, addr, SONIC_RBSIZE, + DMA_FROM_DEVICE); + + pkt_len = sonic_rda_get(dev, entry, + SONIC_RD_PKTLEN); + skb_trim(used_skb, pkt_len); + used_skb->protocol = eth_type_trans(used_skb, + dev); + netif_rx(used_skb); + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + + lp->rx_skb[i] = new_skb; + lp->rx_laddr[i] = new_laddr; + } else { + /* Failed to obtain a new buffer so re-use it */ + new_laddr = addr; + lp->stats.rx_dropped++; + } + /* If RBE is already asserted when RWP advances then + * it's safe to clear RBE after processing this packet. + */ + rbe = rbe || SONIC_READ(SONIC_ISR) & SONIC_INT_RBE; + sonic_update_rra(dev, lp, addr, new_laddr); + } + /* + * give back the descriptor + */ + sonic_rda_put(dev, entry, SONIC_RD_STATUS, 0); + sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1); + + prev_entry = entry; + entry = (entry + 1) & SONIC_RDS_MASK; + } + + lp->cur_rx = entry; + + if (prev_entry != lp->eol_rx) { + /* Advance the EOL flag to put descriptors back into service */ + sonic_rda_put(dev, prev_entry, SONIC_RD_LINK, SONIC_EOL | + sonic_rda_get(dev, prev_entry, SONIC_RD_LINK)); + sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK, ~SONIC_EOL & + sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK)); + lp->eol_rx = prev_entry; + } + + if (rbe) + SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); +} + + +/* + * Get the current statistics. + * This may be called with the device open or closed. + */ +static struct net_device_stats *sonic_get_stats(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + + /* read the tally counter from the SONIC and reset them */ + lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT); + SONIC_WRITE(SONIC_CRCT, 0xffff); + lp->stats.rx_frame_errors += SONIC_READ(SONIC_FAET); + SONIC_WRITE(SONIC_FAET, 0xffff); + lp->stats.rx_missed_errors += SONIC_READ(SONIC_MPT); + SONIC_WRITE(SONIC_MPT, 0xffff); + + return &lp->stats; +} + + +/* + * Set or clear the multicast filter for this adaptor. + */ +static void sonic_multicast_list(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + unsigned int rcr; + struct netdev_hw_addr *ha; + unsigned char *addr; + int i; + + rcr = SONIC_READ(SONIC_RCR) & ~(SONIC_RCR_PRO | SONIC_RCR_AMC); + rcr |= SONIC_RCR_BRD; /* accept broadcast packets */ + + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + rcr |= SONIC_RCR_PRO; + } else { + if ((dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > 15)) { + rcr |= SONIC_RCR_AMC; + } else { + unsigned long flags; + + netif_dbg(lp, ifup, dev, "%s: mc_count %d\n", __func__, + netdev_mc_count(dev)); + sonic_set_cam_enable(dev, 1); /* always enable our own address */ + i = 1; + netdev_for_each_mc_addr(ha, dev) { + addr = ha->addr; + sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]); + sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]); + sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]); + sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i)); + i++; + } + SONIC_WRITE(SONIC_CDC, 16); + SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); + + /* LCAM and TXP commands can't be used simultaneously */ + spin_lock_irqsave(&lp->lock, flags); + sonic_quiesce(dev, SONIC_CR_TXP, false); + SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); + sonic_quiesce(dev, SONIC_CR_LCAM, false); + spin_unlock_irqrestore(&lp->lock, flags); + } + } + + netif_dbg(lp, ifup, dev, "%s: setting RCR=%x\n", __func__, rcr); + + SONIC_WRITE(SONIC_RCR, rcr); +} + + +/* + * Initialize the SONIC ethernet controller. + */ +static int sonic_init(struct net_device *dev, bool may_sleep) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + + /* + * put the Sonic into software-reset mode and + * disable all interrupts + */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + /* While in reset mode, clear CAM Enable register */ + SONIC_WRITE(SONIC_CE, 0); + + /* + * clear software reset flag, disable receiver, clear and + * enable interrupts, then completely initialize the SONIC + */ + SONIC_WRITE(SONIC_CMD, 0); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS | SONIC_CR_STP); + sonic_quiesce(dev, SONIC_CR_ALL, may_sleep); + + /* + * initialize the receive resource area + */ + netif_dbg(lp, ifup, dev, "%s: initialize receive resource area\n", + __func__); + + for (i = 0; i < SONIC_NUM_RRS; i++) { + u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff; + u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16; + sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l); + sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0); + } + + /* initialize all RRA registers */ + SONIC_WRITE(SONIC_RSA, sonic_rr_addr(dev, 0)); + SONIC_WRITE(SONIC_REA, sonic_rr_addr(dev, SONIC_NUM_RRS)); + SONIC_WRITE(SONIC_RRP, sonic_rr_addr(dev, 0)); + SONIC_WRITE(SONIC_RWP, sonic_rr_addr(dev, SONIC_NUM_RRS - 1)); + SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16); + SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1)); + + /* load the resource pointers */ + netif_dbg(lp, ifup, dev, "%s: issuing RRRA command\n", __func__); + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA); + sonic_quiesce(dev, SONIC_CR_RRRA, may_sleep); + + /* + * Initialize the receive descriptors so that they + * become a circular linked list, ie. let the last + * descriptor point to the first again. + */ + netif_dbg(lp, ifup, dev, "%s: initialize receive descriptors\n", + __func__); + + for (i=0; i<SONIC_NUM_RDS; i++) { + sonic_rda_put(dev, i, SONIC_RD_STATUS, 0); + sonic_rda_put(dev, i, SONIC_RD_PKTLEN, 0); + sonic_rda_put(dev, i, SONIC_RD_PKTPTR_L, 0); + sonic_rda_put(dev, i, SONIC_RD_PKTPTR_H, 0); + sonic_rda_put(dev, i, SONIC_RD_SEQNO, 0); + sonic_rda_put(dev, i, SONIC_RD_IN_USE, 1); + sonic_rda_put(dev, i, SONIC_RD_LINK, + lp->rda_laddr + + ((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode))); + } + /* fix last descriptor */ + sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK, + (lp->rda_laddr & 0xffff) | SONIC_EOL); + lp->eol_rx = SONIC_NUM_RDS - 1; + lp->cur_rx = 0; + SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16); + SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff); + + /* + * initialize transmit descriptors + */ + netif_dbg(lp, ifup, dev, "%s: initialize transmit descriptors\n", + __func__); + + for (i = 0; i < SONIC_NUM_TDS; i++) { + sonic_tda_put(dev, i, SONIC_TD_STATUS, 0); + sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0); + sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0); + sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0); + sonic_tda_put(dev, i, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff) + + (i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->tx_skb[i] = NULL; + } + /* fix last descriptor */ + sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff)); + + SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16); + SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff); + lp->cur_tx = 0; + lp->eol_tx = SONIC_NUM_TDS - 1; + + /* + * put our own address to CAM desc[0] + */ + sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]); + sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]); + sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]); + sonic_set_cam_enable(dev, 1); + + for (i = 0; i < 16; i++) + sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i); + + /* + * initialize CAM registers + */ + SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); + SONIC_WRITE(SONIC_CDC, 16); + + /* + * load the CAM + */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); + sonic_quiesce(dev, SONIC_CR_LCAM, may_sleep); + + /* + * enable receiver, disable loopback + * and enable all interrupts + */ + SONIC_WRITE(SONIC_RCR, SONIC_RCR_DEFAULT); + SONIC_WRITE(SONIC_TCR, SONIC_TCR_DEFAULT); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_IMR, SONIC_IMR_DEFAULT); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN); + + netif_dbg(lp, ifup, dev, "%s: new status=%x\n", __func__, + SONIC_READ(SONIC_CMD)); + + return 0; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h new file mode 100644 index 000000000..a5b803eb8 --- /dev/null +++ b/drivers/net/ethernet/natsemi/sonic.h @@ -0,0 +1,473 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Header file for sonic.c + * + * (C) Waldorf Electronics, Germany + * Written by Andreas Busse + * + * NOTE: most of the structure definitions here are endian dependent. + * If you want to use this driver on big endian machines, the data + * and pad structure members must be exchanged. Also, the structures + * need to be changed accordingly to the bus size. + * + * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian) + * + * 990611 David Huggins-Daines <dhd@debian.org>: This machine abstraction + * does not cope with 16-bit bus sizes very well. Therefore I have + * rewritten it with ugly macros and evil inlines. + * + * 050625 Finn Thain: introduced more 32-bit cards and dhd's support + * for 16-bit cards (from the mac68k project). + */ + +#ifndef SONIC_H +#define SONIC_H + + +/* + * SONIC register offsets + */ + +#define SONIC_CMD 0x00 +#define SONIC_DCR 0x01 +#define SONIC_RCR 0x02 +#define SONIC_TCR 0x03 +#define SONIC_IMR 0x04 +#define SONIC_ISR 0x05 + +#define SONIC_UTDA 0x06 +#define SONIC_CTDA 0x07 + +#define SONIC_URDA 0x0d +#define SONIC_CRDA 0x0e +#define SONIC_EOBC 0x13 +#define SONIC_URRA 0x14 +#define SONIC_RSA 0x15 +#define SONIC_REA 0x16 +#define SONIC_RRP 0x17 +#define SONIC_RWP 0x18 +#define SONIC_RSC 0x2b + +#define SONIC_CEP 0x21 +#define SONIC_CAP2 0x22 +#define SONIC_CAP1 0x23 +#define SONIC_CAP0 0x24 +#define SONIC_CE 0x25 +#define SONIC_CDP 0x26 +#define SONIC_CDC 0x27 + +#define SONIC_WT0 0x29 +#define SONIC_WT1 0x2a + +#define SONIC_SR 0x28 + + +/* test-only registers */ + +#define SONIC_TPS 0x08 +#define SONIC_TFC 0x09 +#define SONIC_TSA0 0x0a +#define SONIC_TSA1 0x0b +#define SONIC_TFS 0x0c + +#define SONIC_CRBA0 0x0f +#define SONIC_CRBA1 0x10 +#define SONIC_RBWC0 0x11 +#define SONIC_RBWC1 0x12 +#define SONIC_TTDA 0x20 +#define SONIC_MDT 0x2f + +#define SONIC_TRBA0 0x19 +#define SONIC_TRBA1 0x1a +#define SONIC_TBWC0 0x1b +#define SONIC_TBWC1 0x1c +#define SONIC_LLFA 0x1f + +#define SONIC_ADDR0 0x1d +#define SONIC_ADDR1 0x1e + +/* + * Error counters + */ + +#define SONIC_CRCT 0x2c +#define SONIC_FAET 0x2d +#define SONIC_MPT 0x2e + +#define SONIC_DCR2 0x3f + +/* + * SONIC command bits + */ + +#define SONIC_CR_LCAM 0x0200 +#define SONIC_CR_RRRA 0x0100 +#define SONIC_CR_RST 0x0080 +#define SONIC_CR_ST 0x0020 +#define SONIC_CR_STP 0x0010 +#define SONIC_CR_RXEN 0x0008 +#define SONIC_CR_RXDIS 0x0004 +#define SONIC_CR_TXP 0x0002 +#define SONIC_CR_HTX 0x0001 + +#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \ + SONIC_CR_RXEN | SONIC_CR_TXP) + +/* + * SONIC data configuration bits + */ + +#define SONIC_DCR_EXBUS 0x8000 +#define SONIC_DCR_LBR 0x2000 +#define SONIC_DCR_PO1 0x1000 +#define SONIC_DCR_PO0 0x0800 +#define SONIC_DCR_SBUS 0x0400 +#define SONIC_DCR_USR1 0x0200 +#define SONIC_DCR_USR0 0x0100 +#define SONIC_DCR_WC1 0x0080 +#define SONIC_DCR_WC0 0x0040 +#define SONIC_DCR_DW 0x0020 +#define SONIC_DCR_BMS 0x0010 +#define SONIC_DCR_RFT1 0x0008 +#define SONIC_DCR_RFT0 0x0004 +#define SONIC_DCR_TFT1 0x0002 +#define SONIC_DCR_TFT0 0x0001 + +/* + * Constants for the SONIC receive control register. + */ + +#define SONIC_RCR_ERR 0x8000 +#define SONIC_RCR_RNT 0x4000 +#define SONIC_RCR_BRD 0x2000 +#define SONIC_RCR_PRO 0x1000 +#define SONIC_RCR_AMC 0x0800 +#define SONIC_RCR_LB1 0x0400 +#define SONIC_RCR_LB0 0x0200 + +#define SONIC_RCR_MC 0x0100 +#define SONIC_RCR_BC 0x0080 +#define SONIC_RCR_LPKT 0x0040 +#define SONIC_RCR_CRS 0x0020 +#define SONIC_RCR_COL 0x0010 +#define SONIC_RCR_CRCR 0x0008 +#define SONIC_RCR_FAER 0x0004 +#define SONIC_RCR_LBK 0x0002 +#define SONIC_RCR_PRX 0x0001 + +#define SONIC_RCR_LB_OFF 0 +#define SONIC_RCR_LB_MAC SONIC_RCR_LB0 +#define SONIC_RCR_LB_ENDEC SONIC_RCR_LB1 +#define SONIC_RCR_LB_TRANS (SONIC_RCR_LB0 | SONIC_RCR_LB1) + +/* default RCR setup */ + +#define SONIC_RCR_DEFAULT (SONIC_RCR_BRD) + + +/* + * SONIC Transmit Control register bits + */ + +#define SONIC_TCR_PINTR 0x8000 +#define SONIC_TCR_POWC 0x4000 +#define SONIC_TCR_CRCI 0x2000 +#define SONIC_TCR_EXDIS 0x1000 +#define SONIC_TCR_EXD 0x0400 +#define SONIC_TCR_DEF 0x0200 +#define SONIC_TCR_NCRS 0x0100 +#define SONIC_TCR_CRLS 0x0080 +#define SONIC_TCR_EXC 0x0040 +#define SONIC_TCR_OWC 0x0020 +#define SONIC_TCR_PMB 0x0008 +#define SONIC_TCR_FU 0x0004 +#define SONIC_TCR_BCM 0x0002 +#define SONIC_TCR_PTX 0x0001 + +#define SONIC_TCR_DEFAULT 0x0000 + +/* + * Constants for the SONIC_INTERRUPT_MASK and + * SONIC_INTERRUPT_STATUS registers. + */ + +#define SONIC_INT_BR 0x4000 +#define SONIC_INT_HBL 0x2000 +#define SONIC_INT_LCD 0x1000 +#define SONIC_INT_PINT 0x0800 +#define SONIC_INT_PKTRX 0x0400 +#define SONIC_INT_TXDN 0x0200 +#define SONIC_INT_TXER 0x0100 +#define SONIC_INT_TC 0x0080 +#define SONIC_INT_RDE 0x0040 +#define SONIC_INT_RBE 0x0020 +#define SONIC_INT_RBAE 0x0010 +#define SONIC_INT_CRC 0x0008 +#define SONIC_INT_FAE 0x0004 +#define SONIC_INT_MP 0x0002 +#define SONIC_INT_RFO 0x0001 + + +/* + * The interrupts we allow. + */ + +#define SONIC_IMR_DEFAULT ( SONIC_INT_BR | \ + SONIC_INT_LCD | \ + SONIC_INT_RFO | \ + SONIC_INT_PKTRX | \ + SONIC_INT_TXDN | \ + SONIC_INT_TXER | \ + SONIC_INT_RDE | \ + SONIC_INT_RBAE | \ + SONIC_INT_CRC | \ + SONIC_INT_FAE | \ + SONIC_INT_MP) + + +#define SONIC_EOL 0x0001 +#define CAM_DESCRIPTORS 16 + +/* Offsets in the various DMA buffers accessed by the SONIC */ + +#define SONIC_BITMODE16 0 +#define SONIC_BITMODE32 1 +#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2) +/* Note! These are all measured in bus-size units, so use SONIC_BUS_SCALE */ +#define SIZEOF_SONIC_RR 4 +#define SONIC_RR_BUFADR_L 0 +#define SONIC_RR_BUFADR_H 1 +#define SONIC_RR_BUFSIZE_L 2 +#define SONIC_RR_BUFSIZE_H 3 + +#define SIZEOF_SONIC_RD 7 +#define SONIC_RD_STATUS 0 +#define SONIC_RD_PKTLEN 1 +#define SONIC_RD_PKTPTR_L 2 +#define SONIC_RD_PKTPTR_H 3 +#define SONIC_RD_SEQNO 4 +#define SONIC_RD_LINK 5 +#define SONIC_RD_IN_USE 6 + +#define SIZEOF_SONIC_TD 8 +#define SONIC_TD_STATUS 0 +#define SONIC_TD_CONFIG 1 +#define SONIC_TD_PKTSIZE 2 +#define SONIC_TD_FRAG_COUNT 3 +#define SONIC_TD_FRAG_PTR_L 4 +#define SONIC_TD_FRAG_PTR_H 5 +#define SONIC_TD_FRAG_SIZE 6 +#define SONIC_TD_LINK 7 + +#define SIZEOF_SONIC_CD 4 +#define SONIC_CD_ENTRY_POINTER 0 +#define SONIC_CD_CAP0 1 +#define SONIC_CD_CAP1 2 +#define SONIC_CD_CAP2 3 + +#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1) +#define SONIC_CDA_CAM_ENABLE (CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + +/* + * Some tunables for the buffer areas. Power of 2 is required + * the current driver uses one receive buffer for each descriptor. + * + * MSch: use more buffer space for the slow m68k Macs! + */ +#define SONIC_NUM_RRS 16 /* number of receive resources */ +#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ +#define SONIC_NUM_TDS 16 /* number of transmit descriptors */ + +#define SONIC_RRS_MASK (SONIC_NUM_RRS - 1) +#define SONIC_RDS_MASK (SONIC_NUM_RDS - 1) +#define SONIC_TDS_MASK (SONIC_NUM_TDS - 1) + +#define SONIC_RBSIZE 1520 /* size of one resource buffer */ + +/* Again, measured in bus size units! */ +#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA \ + + (SIZEOF_SONIC_TD * SONIC_NUM_TDS) \ + + (SIZEOF_SONIC_RD * SONIC_NUM_RDS) \ + + (SIZEOF_SONIC_RR * SONIC_NUM_RRS)) + +/* Information that need to be kept for each board. */ +struct sonic_local { + /* Bus size. 0 == 16 bits, 1 == 32 bits. */ + int dma_bitmode; + /* Register offset within the longword (independent of endianness, + and varies from one type of Macintosh SONIC to another + (Aarrgh)) */ + int reg_offset; + void *descriptors; + /* Crud. These areas have to be within the same 64K. Therefore + we allocate a desriptors page, and point these to places within it. */ + void *cda; /* CAM descriptor area */ + void *tda; /* Transmit descriptor area */ + void *rra; /* Receive resource area */ + void *rda; /* Receive descriptor area */ + struct sk_buff* volatile rx_skb[SONIC_NUM_RRS]; /* packets to be received */ + struct sk_buff* volatile tx_skb[SONIC_NUM_TDS]; /* packets to be transmitted */ + unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */ + /* Logical DMA addresses on MIPS, bus addresses on m68k + * (so "laddr" is a bit misleading) */ + dma_addr_t descriptors_laddr; + u32 cda_laddr; /* logical DMA address of CDA */ + u32 tda_laddr; /* logical DMA address of TDA */ + u32 rra_laddr; /* logical DMA address of RRA */ + u32 rda_laddr; /* logical DMA address of RDA */ + dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */ + dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */ + unsigned int cur_rx; + unsigned int cur_tx; /* first unacked transmit packet */ + unsigned int eol_rx; + unsigned int eol_tx; /* last unacked transmit packet */ + int msg_enable; + struct device *device; /* generic device */ + struct net_device_stats stats; + spinlock_t lock; +}; + +#define TX_TIMEOUT (3 * HZ) + +/* Index to functions, as function prototypes. */ + +static int sonic_open(struct net_device *dev); +static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t sonic_interrupt(int irq, void *dev_id); +static void sonic_rx(struct net_device *dev); +static int sonic_close(struct net_device *dev); +static struct net_device_stats *sonic_get_stats(struct net_device *dev); +static void sonic_multicast_list(struct net_device *dev); +static int sonic_init(struct net_device *dev, bool may_sleep); +static void sonic_tx_timeout(struct net_device *dev, unsigned int txqueue); +static void sonic_msg_init(struct net_device *dev); +static int sonic_alloc_descriptors(struct net_device *dev); + +/* Internal inlines for reading/writing DMA buffers. Note that bus + size and endianness matter here, whereas they don't for registers, + as far as we can tell. */ +/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put() + is a much better name. */ +static inline void sonic_buf_put(u16 *base, int bitmode, + int offset, __u16 val) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + __raw_writew(val, base + (offset * 2) + 1); +#else + __raw_writew(val, base + (offset * 2) + 0); +#endif + else + __raw_writew(val, base + (offset * 1) + 0); +} + +static inline __u16 sonic_buf_get(u16 *base, int bitmode, + int offset) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + return __raw_readw(base + (offset * 2) + 1); +#else + return __raw_readw(base + (offset * 2) + 0); +#endif + else + return __raw_readw(base + (offset * 1) + 0); +} + +/* Inlines that you should actually use for reading/writing DMA buffers */ +static inline void sonic_cda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset, val); +} + +static inline __u16 sonic_cda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset); +} + +static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val); +} + +static inline __u16 sonic_get_cam_enable(struct net_device* dev) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE); +} + +static inline void sonic_tda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset, val); +} + +static inline __u16 sonic_tda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset); +} + +static inline void sonic_rda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset, val); +} + +static inline __u16 sonic_rda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset); +} + +static inline void sonic_rra_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset, val); +} + +static inline __u16 sonic_rra_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset); +} + +static inline u16 sonic_rr_addr(struct net_device *dev, int entry) +{ + struct sonic_local *lp = netdev_priv(dev); + + return lp->rra_laddr + + entry * SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode); +} + +static inline u16 sonic_rr_entry(struct net_device *dev, u16 addr) +{ + struct sonic_local *lp = netdev_priv(dev); + + return (addr - (u16)lp->rra_laddr) / (SIZEOF_SONIC_RR * + SONIC_BUS_SCALE(lp->dma_bitmode)); +} + +static const char version[] = + "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n"; + +#endif /* SONIC_H */ diff --git a/drivers/net/ethernet/natsemi/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c new file mode 100644 index 000000000..33f0014b3 --- /dev/null +++ b/drivers/net/ethernet/natsemi/xtsonic.c @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xtsonic.c + * + * (C) 2001 - 2007 Tensilica Inc. + * Kevin Chea <kchea@yahoo.com> + * Marc Gauthier <marc@linux-xtensa.org> + * Chris Zankel <chris@zankel.net> + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on the XT2000. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/gfp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/pgtable.h> + +#include <asm/io.h> +#include <asm/dma.h> + +static char xtsonic_string[] = "xtsonic"; + +extern unsigned xtboard_nvram_valid(void); +extern void xtboard_get_ether_addr(unsigned char *buf); + +#include "sonic.h" + +/* + * According to the documentation for the Sonic ethernet controller, + * EOBC should be 760 words (1520 bytes) for 32-bit applications, and, + * as such, 2 words less than the buffer size. The value for RBSIZE + * defined in sonic.h, however is only 1520. + * + * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and + * RBSIZE 1520 bytes) + */ +#undef SONIC_RBSIZE +#define SONIC_RBSIZE 1524 + +/* + * The chip provides 256 byte register space. + */ +#define SONIC_MEM_SIZE 0x100 + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) \ + (0xffff & *((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ + *((volatile unsigned int *)dev->base_addr+reg) = val + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x101, /* SONIC 83934 */ + 0xffff /* end of list */ +}; + +static int xtsonic_open(struct net_device *dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return -EAGAIN; + } + + retval = sonic_open(dev); + if (retval) + free_irq(dev->irq, dev); + return retval; +} + +static int xtsonic_close(struct net_device *dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static const struct net_device_ops xtsonic_netdev_ops = { + .ndo_open = xtsonic_open, + .ndo_stop = xtsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_rx_mode = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int sonic_probe1(struct net_device *dev) +{ + unsigned int silicon_revision; + struct sonic_local *lp = netdev_priv(dev); + unsigned int base_addr = dev->base_addr; + int i; + int err = 0; + + if (!request_mem_region(base_addr, 0x100, xtsonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + i = 0; + while ((known_revisions[i] != 0xffff) && + (known_revisions[i] != silicon_revision)) + i++; + + if (known_revisions[i] == 0xffff) { + pr_info("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + return -ENODEV; + } + + /* + * Put the sonic into software reset, then retrieve ethernet address. + * Note: we are assuming that the boot-loader has initialized the cam. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, + SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS); + SONIC_WRITE(SONIC_CEP,0); + SONIC_WRITE(SONIC_IMR,0); + + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + + for (i=0; i<3; i++) { + unsigned int val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + lp->dma_bitmode = SONIC_BITMODE32; + + err = sonic_alloc_descriptors(dev); + if (err) + goto out; + + dev->netdev_ops = &xtsonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + + +/* + * Probe for a SONIC ethernet controller on an XT2000 board. + * Actually probing is superfluous but we're paranoid. + */ + +int xtsonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *resmem, *resirq; + int err = 0; + + if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL) + return -ENODEV; + + if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL) + return -ENODEV; + + if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + netdev_boot_setup_check(dev); + + dev->base_addr = resmem->start; + dev->irq = resirq->start; + + if ((err = sonic_probe1(dev))) + goto out; + + pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", + dev->base_addr, dev->dev_addr, dev->irq); + + sonic_msg_init(dev); + + if ((err = register_netdev(dev))) + goto undo_probe1; + + return 0; + +undo_probe1: + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver"); + +#include "sonic.c" + +static int xtsonic_device_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_region (dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver xtsonic_driver = { + .probe = xtsonic_probe, + .remove = xtsonic_device_remove, + .driver = { + .name = xtsonic_string, + }, +}; + +module_platform_driver(xtsonic_driver); |