1 files changed, 37 insertions, 0 deletions
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
new file mode 100644
index 000000000..a751553fa
--- /dev/null
+++ b/drivers/pci/controller/dwc/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
+obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
+obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
+obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
+obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
+obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
+obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
+obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
+obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
+obj-$(CONFIG_PCI_MESON) += pci-meson.o
+obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
+obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
+obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
+
+# The following drivers are for devices that use the generic ACPI
+# pci_root.c driver but don't support standard ECAM config access.
+# They contain MCFG quirks to replace the generic ECAM accessors with
+# device-specific ones that are shared with the DT driver.
+
+# The ACPI driver is generic and should not require driver-specific
+# config options to be enabled, so we always build these drivers on
+# ARM64 and use internal ifdefs to only build the pieces we need
+# depending on whether ACPI, the DT driver, or both are enabled.
+
+ifdef CONFIG_PCI
+obj-$(CONFIG_ARM64) += pcie-al.o
+obj-$(CONFIG_ARM64) += pcie-hisi.o
+endif