summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/Kconfig')
-rw-r--r--drivers/pinctrl/Kconfig434
1 files changed, 434 insertions, 0 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
new file mode 100644
index 000000000..815095326
--- /dev/null
+++ b/drivers/pinctrl/Kconfig
@@ -0,0 +1,434 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PINCTRL infrastructure and drivers
+#
+
+menuconfig PINCTRL
+ bool "Pin controllers"
+
+if PINCTRL
+
+config GENERIC_PINCTRL_GROUPS
+ bool
+
+config PINMUX
+ bool "Support pin multiplexing controllers" if COMPILE_TEST
+
+config GENERIC_PINMUX_FUNCTIONS
+ bool
+ select PINMUX
+
+config PINCONF
+ bool "Support pin configuration controllers" if COMPILE_TEST
+
+config GENERIC_PINCONF
+ bool
+ select PINCONF
+
+config DEBUG_PINCTRL
+ bool "Debug PINCTRL calls"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to add some extra checks and diagnostics to PINCTRL calls.
+
+config PINCTRL_ARTPEC6
+ bool "Axis ARTPEC-6 pin controller driver"
+ depends on MACH_ARTPEC6
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This is the driver for the Axis ARTPEC-6 pin controller. This driver
+ supports pin function multiplexing as well as pin bias and drive
+ strength configuration. Device tree integration instructions can be
+ found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
+
+config PINCTRL_AS3722
+ tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
+ depends on MFD_AS3722 && GPIOLIB
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ AS3722 device supports the configuration of GPIO pins for different
+ functionality. This driver supports the pinmux, push-pull and
+ open drain configuration for the GPIO pins of AS3722 devices. It also
+ supports the GPIO functionality through gpiolib.
+
+config PINCTRL_AXP209
+ tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
+ depends on MFD_AXP20X
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ select GPIOLIB
+ help
+ AXP PMICs provides multiple GPIOs that can be muxed for different
+ functions. This driver bundles a pinctrl driver to select the function
+ muxing and a GPIO driver to handle the GPIO when the GPIO function is
+ selected.
+ Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
+
+config PINCTRL_AT91
+ bool "AT91 pinctrl driver"
+ depends on OF
+ depends on ARCH_AT91
+ select PINMUX
+ select PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y here to enable the at91 pinctrl driver
+
+config PINCTRL_AT91PIO4
+ bool "AT91 PIO4 pinctrl driver"
+ depends on OF
+ depends on ARCH_AT91 || COMPILE_TEST
+ select PINMUX
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select OF_GPIO
+ help
+ Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
+ controller available on sama5d2 SoC.
+
+config PINCTRL_AMD
+ tristate "AMD GPIO pin control"
+ depends on HAS_IOMEM
+ depends on ACPI || COMPILE_TEST
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ driver for memory mapped GPIO functionality on AMD platforms
+ (x86 or arm).Most pins are usually muxed to some other
+ functionality by firmware,so only a small amount is available
+ for gpio use.
+
+ Requires ACPI/FDT device enumeration code to set up a platform
+ device.
+
+config PINCTRL_BM1880
+ bool "Bitmain BM1880 Pinctrl driver"
+ depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
+ default ARCH_BITMAIN
+ select PINMUX
+ help
+ Pinctrl driver for Bitmain BM1880 SoC.
+
+config PINCTRL_DA850_PUPD
+ tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
+ depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
+ pullup/pulldown pin groups.
+
+config PINCTRL_DA9062
+ tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
+ depends on MFD_DA9062
+ select GPIOLIB
+ help
+ The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
+ different functions. This driver bundles a pinctrl driver to select the
+ function muxing and a GPIO driver to handle the GPIO when the GPIO
+ function is selected.
+
+ Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.
+
+config PINCTRL_DIGICOLOR
+ bool
+ depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_LANTIQ
+ bool
+ depends on LANTIQ
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_LPC18XX
+ bool "NXP LPC18XX/43XX SCU pinctrl driver"
+ depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+ default ARCH_LPC18XX
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
+
+config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+ depends on PINCTRL_LANTIQ
+
+config PINCTRL_GEMINI
+ bool
+ depends on ARCH_GEMINI
+ default ARCH_GEMINI
+ select PINMUX
+ select GENERIC_PINCONF
+ select MFD_SYSCON
+
+config PINCTRL_MCP23S08_I2C
+ tristate
+ select REGMAP_I2C
+
+config PINCTRL_MCP23S08_SPI
+ tristate
+ select REGMAP_SPI
+
+config PINCTRL_MCP23S08
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on SPI_MASTER || I2C
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select GENERIC_PINCONF
+ select PINCTRL_MCP23S08_I2C if I2C
+ select PINCTRL_MCP23S08_SPI if SPI_MASTER
+ help
+ SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
+ MCP23008 / MCP23017 / MCP23018 I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs and a
+ corresponding interrupt-controller.
+
+config PINCTRL_OXNAS
+ bool
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select GPIOLIB_IRQCHIP
+ select MFD_SYSCON
+
+config PINCTRL_ROCKCHIP
+ bool
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ select GENERIC_IRQ_CHIP
+ select MFD_SYSCON
+ select OF_GPIO
+
+config PINCTRL_SINGLE
+ tristate "One-register-per-pin type device tree based pinctrl driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This selects the device tree based generic pinctrl driver.
+
+config PINCTRL_SIRF
+ bool "CSR SiRFprimaII pin controller driver"
+ depends on ARCH_SIRF
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_SX150X
+ bool "Semtech SX150x I2C GPIO expander pinctrl driver"
+ depends on I2C=y
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select REGMAP
+ help
+ Say yes here to provide support for Semtech SX150x-series I2C
+ GPIO expanders as pinctrl module.
+ Compatible models include:
+ - 8 bits: sx1508q, sx1502q
+ - 16 bits: sx1509q, sx1506q
+
+config PINCTRL_PISTACHIO
+ def_bool y if MACH_PISTACHIO
+ depends on GPIOLIB
+ select PINMUX
+ select GENERIC_PINCONF
+ select GPIOLIB_IRQCHIP
+ select OF_GPIO
+
+config PINCTRL_ST
+ bool
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_STMFX
+ tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
+ depends on I2C
+ depends on OF_GPIO
+ select GENERIC_PINCONF
+ select GPIOLIB_IRQCHIP
+ select MFD_STMFX
+ help
+ Driver for STMicroelectronics Multi-Function eXpander (STMFX)
+ GPIO expander.
+ This provides a GPIO interface supporting inputs and outputs,
+ and configuring push-pull, open-drain, and can also be used as
+ interrupt-controller.
+
+config PINCTRL_U300
+ bool "U300 pin controller driver"
+ depends on ARCH_U300
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_COH901
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
+config PINCTRL_MAX77620
+ tristate "MAX77620/MAX20024 Pincontrol support"
+ depends on MFD_MAX77620 && OF
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
+ This PMIC has 8 GPIO pins that work as GPIO as well as special
+ function in alternate mode. This driver also configure push-pull,
+ open drain, FPS slots etc.
+
+config PINCTRL_PALMAS
+ tristate "Pinctrl driver for the PALMAS Series MFD devices"
+ depends on OF && MFD_PALMAS
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ Palmas device supports the configuration of pins for different
+ functionality. This driver supports the pinmux, push-pull and
+ open drain configuration for the Palmas series devices like
+ TPS65913, TPS80036 etc.
+
+config PINCTRL_PIC32
+ bool "Microchip PIC32 pin controller driver"
+ depends on OF
+ depends on MACH_PIC32
+ select PINMUX
+ select GENERIC_PINCONF
+ select GPIOLIB_IRQCHIP
+ select OF_GPIO
+ help
+ This is the pin controller and gpio driver for Microchip PIC32
+ microcontrollers. This option is selected automatically when specific
+ machine and arch are selected to build.
+
+config PINCTRL_PIC32MZDA
+ def_bool y if PIC32MZDA
+ select PINCTRL_PIC32
+
+config PINCTRL_ZYNQ
+ bool "Pinctrl driver for Xilinx Zynq"
+ depends on ARCH_ZYNQ
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This selects the pinctrl driver for Xilinx Zynq.
+
+config PINCTRL_INGENIC
+ bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
+ default MACH_INGENIC
+ depends on OF
+ depends on MIPS || COMPILE_TEST
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select REGMAP_MMIO
+
+config PINCTRL_RK805
+ tristate "Pinctrl and GPIO driver for RK805 PMIC"
+ depends on MFD_RK808
+ select GPIOLIB
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This selects the pinctrl driver for RK805.
+
+config PINCTRL_OCELOT
+ bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"
+ depends on OF
+ depends on HAS_IOMEM
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select OF_GPIO
+ select REGMAP_MMIO
+
+source "drivers/pinctrl/actions/Kconfig"
+source "drivers/pinctrl/aspeed/Kconfig"
+source "drivers/pinctrl/bcm/Kconfig"
+source "drivers/pinctrl/berlin/Kconfig"
+source "drivers/pinctrl/freescale/Kconfig"
+source "drivers/pinctrl/intel/Kconfig"
+source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/nomadik/Kconfig"
+source "drivers/pinctrl/nuvoton/Kconfig"
+source "drivers/pinctrl/pxa/Kconfig"
+source "drivers/pinctrl/qcom/Kconfig"
+source "drivers/pinctrl/renesas/Kconfig"
+source "drivers/pinctrl/samsung/Kconfig"
+source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/sprd/Kconfig"
+source "drivers/pinctrl/stm32/Kconfig"
+source "drivers/pinctrl/sunxi/Kconfig"
+source "drivers/pinctrl/tegra/Kconfig"
+source "drivers/pinctrl/ti/Kconfig"
+source "drivers/pinctrl/uniphier/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
+source "drivers/pinctrl/mediatek/Kconfig"
+source "drivers/pinctrl/zte/Kconfig"
+source "drivers/pinctrl/meson/Kconfig"
+source "drivers/pinctrl/cirrus/Kconfig"
+source "drivers/pinctrl/visconti/Kconfig"
+
+config PINCTRL_XWAY
+ bool
+ depends on SOC_TYPE_XWAY
+ depends on PINCTRL_LANTIQ
+
+config PINCTRL_TB10X
+ bool
+ depends on OF && ARC_PLAT_TB10X
+ select GPIOLIB
+
+config PINCTRL_EQUILIBRIUM
+ tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"
+ depends on OF && HAS_IOMEM
+ depends on X86 || COMPILE_TEST
+ select PINMUX
+ select PINCONF
+ select GPIOLIB
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+
+ help
+ Equilibrium pinctrl driver is a pinctrl & GPIO driver for Intel Lightning
+ Mountain network processor SoC that supports both the linux GPIO and pin
+ control frameworks. It provides interfaces to setup pinmux, assign desired
+ pin functions, configure GPIO attributes for LGM SoC pins. Pinmux and
+ pinconf settings are retrieved from device tree.
+
+endif