diff options
Diffstat (limited to 'drivers/scsi/aha1542.h')
| -rw-r--r-- | drivers/scsi/aha1542.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h new file mode 100644 index 000000000..f5b0d210f --- /dev/null +++ b/drivers/scsi/aha1542.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _AHA1542_H_ +#define _AHA1542_H_ + +#include <linux/types.h> + +/* I/O Port interface 4.2 */ +/* READ */ +#define STATUS(base) base +#define STST BIT(7) /* Self Test in Progress */ +#define DIAGF BIT(6) /* Internal Diagnostic Failure */ +#define INIT BIT(5) /* Mailbox Initialization Required */ +#define IDLE BIT(4) /* SCSI Host Adapter Idle */ +#define CDF BIT(3) /* Command/Data Out Port Full */ +#define DF BIT(2) /* Data In Port Full */ +/* BIT(1) is reserved */ +#define INVDCMD BIT(0) /* Invalid H A Command */ +#define STATMASK (STST | DIAGF | INIT | IDLE | CDF | DF | INVDCMD) + +#define INTRFLAGS(base) (STATUS(base)+2) +#define ANYINTR BIT(7) /* Any Interrupt */ +#define SCRD BIT(3) /* SCSI Reset Detected */ +#define HACC BIT(2) /* HA Command Complete */ +#define MBOA BIT(1) /* MBO Empty */ +#define MBIF BIT(0) /* MBI Full */ +#define INTRMASK (ANYINTR | SCRD | HACC | MBOA | MBIF) + +/* WRITE */ +#define CONTROL(base) STATUS(base) +#define HRST BIT(7) /* Hard Reset */ +#define SRST BIT(6) /* Soft Reset */ +#define IRST BIT(5) /* Interrupt Reset */ +#define SCRST BIT(4) /* SCSI Bus Reset */ + +/* READ/WRITE */ +#define DATA(base) (STATUS(base)+1) +#define CMD_NOP 0x00 /* No Operation */ +#define CMD_MBINIT 0x01 /* Mailbox Initialization */ +#define CMD_START_SCSI 0x02 /* Start SCSI Command */ +#define CMD_INQUIRY 0x04 /* Adapter Inquiry */ +#define CMD_EMBOI 0x05 /* Enable MailBox Out Interrupt */ +#define CMD_BUSON_TIME 0x07 /* Set Bus-On Time */ +#define CMD_BUSOFF_TIME 0x08 /* Set Bus-Off Time */ +#define CMD_DMASPEED 0x09 /* Set AT Bus Transfer Speed */ +#define CMD_RETDEVS 0x0a /* Return Installed Devices */ +#define CMD_RETCONF 0x0b /* Return Configuration Data */ +#define CMD_RETSETUP 0x0d /* Return Setup Data */ +#define CMD_ECHO 0x1f /* ECHO Command Data */ + +#define CMD_EXTBIOS 0x28 /* Return extend bios information only 1542C */ +#define CMD_MBENABLE 0x29 /* Set Mailbox Interface enable only 1542C */ + +/* Mailbox Definition 5.2.1 and 5.2.2 */ +struct mailbox { + u8 status; /* Command/Status */ + u8 ccbptr[3]; /* msb, .., lsb */ +}; + +/* This is used with scatter-gather */ +struct chain { + u8 datalen[3]; /* Size of this part of chain */ + u8 dataptr[3]; /* Location of data */ +}; + +/* These belong in scsi.h also */ +static inline void any2scsi(u8 *p, u32 v) +{ + p[0] = v >> 16; + p[1] = v >> 8; + p[2] = v; +} + +#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) ) + +#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \ + + (((long)(up)[2]) << 8) + ((long)(up)[3]) ) + +#define MAX_CDB 12 +#define MAX_SENSE 14 + +struct ccb { /* Command Control Block 5.3 */ + u8 op; /* Command Control Block Operation Code */ + u8 idlun; /* op=0,2:Target Id, op=1:Initiator Id */ + /* Outbound data transfer, length is checked*/ + /* Inbound data transfer, length is checked */ + /* Logical Unit Number */ + u8 cdblen; /* SCSI Command Length */ + u8 rsalen; /* Request Sense Allocation Length/Disable */ + u8 datalen[3]; /* Data Length (msb, .., lsb) */ + u8 dataptr[3]; /* Data Pointer */ + u8 linkptr[3]; /* Link Pointer */ + u8 commlinkid; /* Command Linking Identifier */ + u8 hastat; /* Host Adapter Status (HASTAT) */ + u8 tarstat; /* Target Device Status */ + u8 reserved[2]; + u8 cdb[MAX_CDB+MAX_SENSE]; /* SCSI Command Descriptor Block */ + /* REQUEST SENSE */ +}; + +#define AHA1542_REGION_SIZE 4 +#define AHA1542_MAILBOXES 8 + +#endif /* _AHA1542_H_ */ |