diff options
Diffstat (limited to 'drivers/usb/gadget/udc/dummy_hcd.c')
| -rw-r--r-- | drivers/usb/gadget/udc/dummy_hcd.c | 2895 |
1 files changed, 2895 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c new file mode 100644 index 000000000..92d01ddae --- /dev/null +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -0,0 +1,2895 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 Alan Stern + */ + + +/* + * This exposes a device side "USB gadget" API, driven by requests to a + * Linux-USB host controller driver. USB traffic is simulated; there's + * no need for USB hardware. Use this with two other drivers: + * + * - Gadget driver, responding to requests (device); + * - Host-side device driver, as already familiar in Linux. + * + * Having this all in one kernel can help some stages of development, + * bypassing some hardware (and driver) issues. UML could help too. + * + * Note: The emulation does not include isochronous transfers! + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/gadget.h> +#include <linux/usb/hcd.h> +#include <linux/scatterlist.h> + +#include <asm/byteorder.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + +#define DRIVER_DESC "USB Host+Gadget Emulator" +#define DRIVER_VERSION "02 May 2005" + +#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ +#define POWER_BUDGET_3 900 /* in mA */ + +static const char driver_name[] = "dummy_hcd"; +static const char driver_desc[] = "USB Host+Gadget Emulator"; + +static const char gadget_name[] = "dummy_udc"; + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); + +struct dummy_hcd_module_parameters { + bool is_super_speed; + bool is_high_speed; + unsigned int num; +}; + +static struct dummy_hcd_module_parameters mod_data = { + .is_super_speed = false, + .is_high_speed = true, + .num = 1, +}; +module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO); +MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection"); +module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO); +MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection"); +module_param_named(num, mod_data.num, uint, S_IRUGO); +MODULE_PARM_DESC(num, "number of emulated controllers"); +/*-------------------------------------------------------------------------*/ + +/* gadget side driver data structres */ +struct dummy_ep { + struct list_head queue; + unsigned long last_io; /* jiffies timestamp */ + struct usb_gadget *gadget; + const struct usb_endpoint_descriptor *desc; + struct usb_ep ep; + unsigned halted:1; + unsigned wedged:1; + unsigned already_seen:1; + unsigned setup_stage:1; + unsigned stream_en:1; +}; + +struct dummy_request { + struct list_head queue; /* ep's requests */ + struct usb_request req; +}; + +static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep) +{ + return container_of(_ep, struct dummy_ep, ep); +} + +static inline struct dummy_request *usb_request_to_dummy_request + (struct usb_request *_req) +{ + return container_of(_req, struct dummy_request, req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * Every device has ep0 for control requests, plus up to 30 more endpoints, + * in one of two types: + * + * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint + * number can be changed. Names like "ep-a" are used for this type. + * + * - Fixed Function: in other cases. some characteristics may be mutable; + * that'd be hardware-specific. Names like "ep12out-bulk" are used. + * + * Gadget drivers are responsible for not setting up conflicting endpoint + * configurations, illegal or unsupported packet lengths, and so on. + */ + +static const char ep0name[] = "ep0"; + +static const struct { + const char *name; + const struct usb_ep_caps caps; +} ep_info[] = { +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + +/* we don't provide isochronous endpoints since we don't support them */ +#define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT) + + /* everyone has ep0 */ + EP_INFO(ep0name, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + /* act like a pxa250: fifteen fixed function endpoints */ + EP_INFO("ep1in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep2out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep3in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep4out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep5in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep6in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep7out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep8in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep9out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep10in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep11in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep12out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep13in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep14out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep15in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + + /* or like sa1100: two fixed function endpoints */ + EP_INFO("ep1out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep2in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + + /* and now some generic EPs so we have enough in multi config */ + EP_INFO("ep-aout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-bin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-cout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-dout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-ein", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-fout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-gin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-hout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-iout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-jin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-kout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-lin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-mout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + +#undef EP_INFO +}; + +#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info) + +/*-------------------------------------------------------------------------*/ + +#define FIFO_SIZE 64 + +struct urbp { + struct urb *urb; + struct list_head urbp_list; + struct sg_mapping_iter miter; + u32 miter_started; +}; + + +enum dummy_rh_state { + DUMMY_RH_RESET, + DUMMY_RH_SUSPENDED, + DUMMY_RH_RUNNING +}; + +struct dummy_hcd { + struct dummy *dum; + enum dummy_rh_state rh_state; + struct timer_list timer; + u32 port_status; + u32 old_status; + unsigned long re_timeout; + + struct usb_device *udev; + struct list_head urbp_list; + struct urbp *next_frame_urbp; + + u32 stream_en_ep; + u8 num_stream[30 / 2]; + + unsigned active:1; + unsigned old_active:1; + unsigned resuming:1; +}; + +struct dummy { + spinlock_t lock; + + /* + * DEVICE/GADGET side support + */ + struct dummy_ep ep[DUMMY_ENDPOINTS]; + int address; + int callback_usage; + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct dummy_request fifo_req; + u8 fifo_buf[FIFO_SIZE]; + u16 devstatus; + unsigned ints_enabled:1; + unsigned udc_suspended:1; + unsigned pullup:1; + + /* + * HOST side support + */ + struct dummy_hcd *hs_hcd; + struct dummy_hcd *ss_hcd; +}; + +static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) +{ + return (struct dummy_hcd *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum) +{ + return container_of((void *) dum, struct usb_hcd, hcd_priv); +} + +static inline struct device *dummy_dev(struct dummy_hcd *dum) +{ + return dummy_hcd_to_hcd(dum)->self.controller; +} + +static inline struct device *udc_dev(struct dummy *dum) +{ + return dum->gadget.dev.parent; +} + +static inline struct dummy *ep_to_dummy(struct dummy_ep *ep) +{ + return container_of(ep->gadget, struct dummy, gadget); +} + +static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) +{ + struct dummy *dum = container_of(gadget, struct dummy, gadget); + if (dum->gadget.speed == USB_SPEED_SUPER) + return dum->ss_hcd; + else + return dum->hs_hcd; +} + +static inline struct dummy *gadget_dev_to_dummy(struct device *dev) +{ + return container_of(dev, struct dummy, gadget.dev); +} + +/*-------------------------------------------------------------------------*/ + +/* DEVICE/GADGET SIDE UTILITY ROUTINES */ + +/* called with spinlock held */ +static void nuke(struct dummy *dum, struct dummy_ep *ep) +{ + while (!list_empty(&ep->queue)) { + struct dummy_request *req; + + req = list_entry(ep->queue.next, struct dummy_request, queue); + list_del_init(&req->queue); + req->req.status = -ESHUTDOWN; + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + } +} + +/* caller must hold lock */ +static void stop_activity(struct dummy *dum) +{ + int i; + + /* prevent any more requests */ + dum->address = 0; + + /* The timer is left running so that outstanding URBs can fail */ + + /* nuke any pending requests first, so driver i/o is quiesced */ + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); + + /* driver now does any non-usb quiescing necessary */ +} + +/** + * set_link_state_by_speed() - Sets the current state of the link according to + * the hcd speed + * @dum_hcd: pointer to the dummy_hcd structure to update the link state for + * + * This function updates the port_status according to the link state and the + * speed of the hcd. + */ +static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) +{ + struct dummy *dum = dum_hcd->dum; + + if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) { + if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) { + dum_hcd->port_status = 0; + } else if (!dum->pullup || dum->udc_suspended) { + /* UDC suspend must cause a disconnect */ + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE); + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + /* device is connected and not suspended */ + dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_SPEED_5GBPS) ; + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) && + (dum_hcd->port_status & + USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + } else { + if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) { + dum_hcd->port_status = 0; + } else if (!dum->pullup || dum->udc_suspended) { + /* UDC suspend must cause a disconnect */ + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED | + USB_PORT_STAT_SUSPEND); + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + dum_hcd->port_status |= USB_PORT_STAT_CONNECTION; + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0) + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + else if ((dum_hcd->port_status & + USB_PORT_STAT_SUSPEND) == 0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + } +} + +/* caller must hold lock */ +static void set_link_state(struct dummy_hcd *dum_hcd) + __must_hold(&dum->lock) +{ + struct dummy *dum = dum_hcd->dum; + unsigned int power_bit; + + dum_hcd->active = 0; + if (dum->pullup) + if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 && + dum->gadget.speed != USB_SPEED_SUPER) || + (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 && + dum->gadget.speed == USB_SPEED_SUPER)) + return; + + set_link_state_by_speed(dum_hcd); + power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ? + USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER); + + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || + dum_hcd->active) + dum_hcd->resuming = 0; + + /* Currently !connected or in reset */ + if ((dum_hcd->port_status & power_bit) == 0 || + (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { + unsigned int disconnect = power_bit & + dum_hcd->old_status & (~dum_hcd->port_status); + unsigned int reset = USB_PORT_STAT_RESET & + (~dum_hcd->old_status) & dum_hcd->port_status; + + /* Report reset and disconnect events to the driver */ + if (dum->ints_enabled && (disconnect || reset)) { + stop_activity(dum); + ++dum->callback_usage; + spin_unlock(&dum->lock); + if (reset) + usb_gadget_udc_reset(&dum->gadget, dum->driver); + else + dum->driver->disconnect(&dum->gadget); + spin_lock(&dum->lock); + --dum->callback_usage; + } + } else if (dum_hcd->active != dum_hcd->old_active && + dum->ints_enabled) { + ++dum->callback_usage; + spin_unlock(&dum->lock); + if (dum_hcd->old_active && dum->driver->suspend) + dum->driver->suspend(&dum->gadget); + else if (!dum_hcd->old_active && dum->driver->resume) + dum->driver->resume(&dum->gadget); + spin_lock(&dum->lock); + --dum->callback_usage; + } + + dum_hcd->old_status = dum_hcd->port_status; + dum_hcd->old_active = dum_hcd->active; +} + +/*-------------------------------------------------------------------------*/ + +/* DEVICE/GADGET SIDE DRIVER + * + * This only tracks gadget state. All the work is done when the host + * side tries some (emulated) i/o operation. Real device controller + * drivers would do real i/o using dma, fifos, irqs, timers, etc. + */ + +#define is_enabled(dum) \ + (dum->port_status & USB_PORT_STAT_ENABLE) + +static int dummy_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dummy *dum; + struct dummy_hcd *dum_hcd; + struct dummy_ep *ep; + unsigned max; + int retval; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dum = ep_to_dummy(ep); + if (!dum->driver) + return -ESHUTDOWN; + + dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + if (!is_enabled(dum_hcd)) + return -ESHUTDOWN; + + /* + * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the + * maximum packet size. + * For SS devices the wMaxPacketSize is limited by 1024. + */ + max = usb_endpoint_maxp(desc); + + /* drivers must not request bad settings, since lower levels + * (hardware or its drivers) may not check. some endpoints + * can't do iso, many have maxpacket limitations, etc. + * + * since this "hardware" driver is here to help debugging, we + * have some extra sanity checks. (there could be more though, + * especially for "ep9out" style fixed function ones.) + */ + retval = -EINVAL; + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_BULK: + if (strstr(ep->ep.name, "-iso") + || strstr(ep->ep.name, "-int")) { + goto done; + } + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + if (max == 1024) + break; + goto done; + case USB_SPEED_HIGH: + if (max == 512) + break; + goto done; + case USB_SPEED_FULL: + if (max == 8 || max == 16 || max == 32 || max == 64) + /* we'll fake any legal size */ + break; + /* save a return statement */ + default: + goto done; + } + break; + case USB_ENDPOINT_XFER_INT: + if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + fallthrough; + case USB_SPEED_FULL: + if (max <= 64) + break; + /* save a return statement */ + fallthrough; + default: + if (max <= 8) + break; + goto done; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (strstr(ep->ep.name, "-bulk") + || strstr(ep->ep.name, "-int")) + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + fallthrough; + case USB_SPEED_FULL: + if (max <= 1023) + break; + /* save a return statement */ + default: + goto done; + } + break; + default: + /* few chips support control except on ep0 */ + goto done; + } + + _ep->maxpacket = max; + if (usb_ss_max_streams(_ep->comp_desc)) { + if (!usb_endpoint_xfer_bulk(desc)) { + dev_err(udc_dev(dum), "Can't enable stream support on " + "non-bulk ep %s\n", _ep->name); + return -EINVAL; + } + ep->stream_en = 1; + } + ep->desc = desc; + + dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n", + _ep->name, + desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", + usb_ep_type_string(usb_endpoint_type(desc)), + max, ep->stream_en ? "enabled" : "disabled"); + + /* at this point real hardware should be NAKing transfers + * to that endpoint, until a buffer is queued to it. + */ + ep->halted = ep->wedged = 0; + retval = 0; +done: + return retval; +} + +static int dummy_disable(struct usb_ep *_ep) +{ + struct dummy_ep *ep; + struct dummy *dum; + unsigned long flags; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + dum = ep_to_dummy(ep); + + spin_lock_irqsave(&dum->lock, flags); + ep->desc = NULL; + ep->stream_en = 0; + nuke(dum, ep); + spin_unlock_irqrestore(&dum->lock, flags); + + dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); + return 0; +} + +static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, + gfp_t mem_flags) +{ + struct dummy_request *req; + + if (!_ep) + return NULL; + + req = kzalloc(sizeof(*req), mem_flags); + if (!req) + return NULL; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_request *req; + + if (!_ep || !_req) { + WARN_ON(1); + return; + } + + req = usb_request_to_dummy_request(_req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +static void fifo_complete(struct usb_ep *ep, struct usb_request *req) +{ +} + +static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t mem_flags) +{ + struct dummy_ep *ep; + struct dummy_request *req; + struct dummy *dum; + struct dummy_hcd *dum_hcd; + unsigned long flags; + + req = usb_request_to_dummy_request(_req); + if (!_req || !list_empty(&req->queue) || !_req->complete) + return -EINVAL; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || (!ep->desc && _ep->name != ep0name)) + return -EINVAL; + + dum = ep_to_dummy(ep); + dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + if (!dum->driver || !is_enabled(dum_hcd)) + return -ESHUTDOWN; + +#if 0 + dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n", + ep, _req, _ep->name, _req->length, _req->buf); +#endif + _req->status = -EINPROGRESS; + _req->actual = 0; + spin_lock_irqsave(&dum->lock, flags); + + /* implement an emulated single-request FIFO */ + if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + list_empty(&dum->fifo_req.queue) && + list_empty(&ep->queue) && + _req->length <= FIFO_SIZE) { + req = &dum->fifo_req; + req->req = *_req; + req->req.buf = dum->fifo_buf; + memcpy(dum->fifo_buf, _req->buf, _req->length); + req->req.context = dum; + req->req.complete = fifo_complete; + + list_add_tail(&req->queue, &ep->queue); + spin_unlock(&dum->lock); + _req->actual = _req->length; + _req->status = 0; + usb_gadget_giveback_request(_ep, _req); + spin_lock(&dum->lock); + } else + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&dum->lock, flags); + + /* real hardware would likely enable transfers here, in case + * it'd been left NAKing. + */ + return 0; +} + +static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_ep *ep; + struct dummy *dum; + int retval = -EINVAL; + unsigned long flags; + struct dummy_request *req = NULL; + + if (!_ep || !_req) + return retval; + ep = usb_ep_to_dummy_ep(_ep); + dum = ep_to_dummy(ep); + + if (!dum->driver) + return -ESHUTDOWN; + + local_irq_save(flags); + spin_lock(&dum->lock); + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) { + list_del_init(&req->queue); + _req->status = -ECONNRESET; + retval = 0; + break; + } + } + spin_unlock(&dum->lock); + + if (retval == 0) { + dev_dbg(udc_dev(dum), + "dequeued req %p from %s, len %d buf %p\n", + req, _ep->name, _req->length, _req->buf); + usb_gadget_giveback_request(_ep, _req); + } + local_irq_restore(flags); + return retval; +} + +static int +dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) +{ + struct dummy_ep *ep; + struct dummy *dum; + + if (!_ep) + return -EINVAL; + ep = usb_ep_to_dummy_ep(_ep); + dum = ep_to_dummy(ep); + if (!dum->driver) + return -ESHUTDOWN; + if (!value) + ep->halted = ep->wedged = 0; + else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + !list_empty(&ep->queue)) + return -EAGAIN; + else { + ep->halted = 1; + if (wedged) + ep->wedged = 1; + } + /* FIXME clear emulated data toggle too */ + return 0; +} + +static int +dummy_set_halt(struct usb_ep *_ep, int value) +{ + return dummy_set_halt_and_wedge(_ep, value, 0); +} + +static int dummy_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) + return -EINVAL; + return dummy_set_halt_and_wedge(_ep, 1, 1); +} + +static const struct usb_ep_ops dummy_ep_ops = { + .enable = dummy_enable, + .disable = dummy_disable, + + .alloc_request = dummy_alloc_request, + .free_request = dummy_free_request, + + .queue = dummy_queue, + .dequeue = dummy_dequeue, + + .set_halt = dummy_set_halt, + .set_wedge = dummy_set_wedge, +}; + +/*-------------------------------------------------------------------------*/ + +/* there are both host and device side versions of this call ... */ +static int dummy_g_get_frame(struct usb_gadget *_gadget) +{ + struct timespec64 ts64; + + ktime_get_ts64(&ts64); + return ts64.tv_nsec / NSEC_PER_MSEC; +} + +static int dummy_wakeup(struct usb_gadget *_gadget) +{ + struct dummy_hcd *dum_hcd; + + dum_hcd = gadget_to_dummy_hcd(_gadget); + if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE) + | (1 << USB_DEVICE_REMOTE_WAKEUP)))) + return -EINVAL; + if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0) + return -ENOLINK; + if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + return -EIO; + + /* FIXME: What if the root hub is suspended but the port isn't? */ + + /* hub notices our request, issues downstream resume, etc */ + dum_hcd->resuming = 1; + dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20); + mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout); + return 0; +} + +static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value) +{ + struct dummy *dum; + + _gadget->is_selfpowered = (value != 0); + dum = gadget_to_dummy_hcd(_gadget)->dum; + if (value) + dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED); + else + dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + return 0; +} + +static void dummy_udc_update_ep0(struct dummy *dum) +{ + if (dum->gadget.speed == USB_SPEED_SUPER) + dum->ep[0].ep.maxpacket = 9; + else + dum->ep[0].ep.maxpacket = 64; +} + +static int dummy_pullup(struct usb_gadget *_gadget, int value) +{ + struct dummy_hcd *dum_hcd; + struct dummy *dum; + unsigned long flags; + + dum = gadget_dev_to_dummy(&_gadget->dev); + dum_hcd = gadget_to_dummy_hcd(_gadget); + + spin_lock_irqsave(&dum->lock, flags); + dum->pullup = (value != 0); + set_link_state(dum_hcd); + if (value == 0) { + /* + * Emulate synchronize_irq(): wait for callbacks to finish. + * This seems to be the best place to emulate the call to + * synchronize_irq() that's in usb_gadget_remove_driver(). + * Doing it in dummy_udc_stop() would be too late since it + * is called after the unbind callback and unbind shouldn't + * be invoked until all the other callbacks are finished. + */ + while (dum->callback_usage > 0) { + spin_unlock_irqrestore(&dum->lock, flags); + usleep_range(1000, 2000); + spin_lock_irqsave(&dum->lock, flags); + } + } + spin_unlock_irqrestore(&dum->lock, flags); + + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static void dummy_udc_set_speed(struct usb_gadget *_gadget, + enum usb_device_speed speed) +{ + struct dummy *dum; + + dum = gadget_dev_to_dummy(&_gadget->dev); + dum->gadget.speed = speed; + dummy_udc_update_ep0(dum); +} + +static int dummy_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int dummy_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops dummy_ops = { + .get_frame = dummy_g_get_frame, + .wakeup = dummy_wakeup, + .set_selfpowered = dummy_set_selfpowered, + .pullup = dummy_pullup, + .udc_start = dummy_udc_start, + .udc_stop = dummy_udc_stop, + .udc_set_speed = dummy_udc_set_speed, +}; + +/*-------------------------------------------------------------------------*/ + +/* "function" sysfs attribute */ +static ssize_t function_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dummy *dum = gadget_dev_to_dummy(dev); + + if (!dum->driver || !dum->driver->function) + return 0; + return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function); +} +static DEVICE_ATTR_RO(function); + +/*-------------------------------------------------------------------------*/ + +/* + * Driver registration/unregistration. + * + * This is basically hardware-specific; there's usually only one real USB + * device (not host) controller since that's how USB devices are intended + * to work. So most implementations of these api calls will rely on the + * fact that only one driver will ever bind to the hardware. But curious + * hardware can be built with discrete components, so the gadget API doesn't + * require that assumption. + * + * For this emulator, it might be convenient to create a usb device + * for each driver that registers: just add to a big root hub. + */ + +static int dummy_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); + struct dummy *dum = dum_hcd->dum; + + switch (g->speed) { + /* All the speeds we support */ + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + break; + default: + dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n", + driver->max_speed); + return -EINVAL; + } + + /* + * DEVICE side init ... the layer above hardware, which + * can't enumerate without help from the driver we're binding. + */ + + spin_lock_irq(&dum->lock); + dum->devstatus = 0; + dum->driver = driver; + dum->ints_enabled = 1; + spin_unlock_irq(&dum->lock); + + return 0; +} + +static int dummy_udc_stop(struct usb_gadget *g) +{ + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); + struct dummy *dum = dum_hcd->dum; + + spin_lock_irq(&dum->lock); + dum->ints_enabled = 0; + stop_activity(dum); + dum->driver = NULL; + spin_unlock_irq(&dum->lock); + + return 0; +} + +#undef is_enabled + +/* The gadget structure is stored inside the hcd structure and will be + * released along with it. */ +static void init_dummy_udc_hw(struct dummy *dum) +{ + int i; + + INIT_LIST_HEAD(&dum->gadget.ep_list); + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep[i]; + + if (!ep_info[i].name) + break; + ep->ep.name = ep_info[i].name; + ep->ep.caps = ep_info[i].caps; + ep->ep.ops = &dummy_ep_ops; + list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list); + ep->halted = ep->wedged = ep->already_seen = + ep->setup_stage = 0; + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.max_streams = 16; + ep->last_io = jiffies; + ep->gadget = &dum->gadget; + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + } + + dum->gadget.ep0 = &dum->ep[0].ep; + list_del_init(&dum->ep[0].ep.ep_list); + INIT_LIST_HEAD(&dum->fifo_req.queue); + +#ifdef CONFIG_USB_OTG + dum->gadget.is_otg = 1; +#endif +} + +static int dummy_udc_probe(struct platform_device *pdev) +{ + struct dummy *dum; + int rc; + + dum = *((void **)dev_get_platdata(&pdev->dev)); + /* Clear usb_gadget region for new registration to udc-core */ + memzero_explicit(&dum->gadget, sizeof(struct usb_gadget)); + dum->gadget.name = gadget_name; + dum->gadget.ops = &dummy_ops; + if (mod_data.is_super_speed) + dum->gadget.max_speed = USB_SPEED_SUPER; + else if (mod_data.is_high_speed) + dum->gadget.max_speed = USB_SPEED_HIGH; + else + dum->gadget.max_speed = USB_SPEED_FULL; + + dum->gadget.dev.parent = &pdev->dev; + init_dummy_udc_hw(dum); + + rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget); + if (rc < 0) + goto err_udc; + + rc = device_create_file(&dum->gadget.dev, &dev_attr_function); + if (rc < 0) + goto err_dev; + platform_set_drvdata(pdev, dum); + return rc; + +err_dev: + usb_del_gadget_udc(&dum->gadget); +err_udc: + return rc; +} + +static int dummy_udc_remove(struct platform_device *pdev) +{ + struct dummy *dum = platform_get_drvdata(pdev); + + device_remove_file(&dum->gadget.dev, &dev_attr_function); + usb_del_gadget_udc(&dum->gadget); + return 0; +} + +static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd, + int suspend) +{ + spin_lock_irq(&dum->lock); + dum->udc_suspended = suspend; + set_link_state(dum_hcd); + spin_unlock_irq(&dum->lock); +} + +static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct dummy *dum = platform_get_drvdata(pdev); + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + + dev_dbg(&pdev->dev, "%s\n", __func__); + dummy_udc_pm(dum, dum_hcd, 1); + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static int dummy_udc_resume(struct platform_device *pdev) +{ + struct dummy *dum = platform_get_drvdata(pdev); + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + + dev_dbg(&pdev->dev, "%s\n", __func__); + dummy_udc_pm(dum, dum_hcd, 0); + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static struct platform_driver dummy_udc_driver = { + .probe = dummy_udc_probe, + .remove = dummy_udc_remove, + .suspend = dummy_udc_suspend, + .resume = dummy_udc_resume, + .driver = { + .name = gadget_name, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc) +{ + unsigned int index; + + index = usb_endpoint_num(desc) << 1; + if (usb_endpoint_dir_in(desc)) + index |= 1; + return index; +} + +/* HOST SIDE DRIVER + * + * this uses the hcd framework to hook up to host side drivers. + * its root hub will only have one device, otherwise it acts like + * a normal host controller. + * + * when urbs are queued, they're just stuck on a list that we + * scan in a timer callback. that callback connects writes from + * the host with reads from the device, and so on, based on the + * usb 2.0 rules. + */ + +static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb) +{ + const struct usb_endpoint_descriptor *desc = &urb->ep->desc; + u32 index; + + if (!usb_endpoint_xfer_bulk(desc)) + return 0; + + index = dummy_get_ep_idx(desc); + return (1 << index) & dum_hcd->stream_en_ep; +} + +/* + * The max stream number is saved as a nibble so for the 30 possible endpoints + * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0 + * means we use only 1 stream). The maximum according to the spec is 16bit so + * if the 16 stream limit is about to go, the array size should be incremented + * to 30 elements of type u16. + */ +static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd, + unsigned int pipe) +{ + int max_streams; + + max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; + if (usb_pipeout(pipe)) + max_streams >>= 4; + else + max_streams &= 0xf; + max_streams++; + return max_streams; +} + +static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd, + unsigned int pipe, unsigned int streams) +{ + int max_streams; + + streams--; + max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; + if (usb_pipeout(pipe)) { + streams <<= 4; + max_streams &= 0xf; + } else { + max_streams &= 0xf0; + } + max_streams |= streams; + dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams; +} + +static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb) +{ + unsigned int max_streams; + int enabled; + + enabled = dummy_ep_stream_en(dum_hcd, urb); + if (!urb->stream_id) { + if (enabled) + return -EINVAL; + return 0; + } + if (!enabled) + return -EINVAL; + + max_streams = get_max_streams_for_pipe(dum_hcd, + usb_pipeendpoint(urb->pipe)); + if (urb->stream_id > max_streams) { + dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n", + urb->stream_id); + BUG(); + return -EINVAL; + } + return 0; +} + +static int dummy_urb_enqueue( + struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags +) { + struct dummy_hcd *dum_hcd; + struct urbp *urbp; + unsigned long flags; + int rc; + + urbp = kmalloc(sizeof *urbp, mem_flags); + if (!urbp) + return -ENOMEM; + urbp->urb = urb; + urbp->miter_started = 0; + + dum_hcd = hcd_to_dummy_hcd(hcd); + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + + rc = dummy_validate_stream(dum_hcd, urb); + if (rc) { + kfree(urbp); + goto done; + } + + rc = usb_hcd_link_urb_to_ep(hcd, urb); + if (rc) { + kfree(urbp); + goto done; + } + + if (!dum_hcd->udev) { + dum_hcd->udev = urb->dev; + usb_get_dev(dum_hcd->udev); + } else if (unlikely(dum_hcd->udev != urb->dev)) + dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n"); + + list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list); + urb->hcpriv = urbp; + if (!dum_hcd->next_frame_urbp) + dum_hcd->next_frame_urbp = urbp; + if (usb_pipetype(urb->pipe) == PIPE_CONTROL) + urb->error_count = 1; /* mark as a new urb */ + + /* kick the scheduler, it'll do the rest */ + if (!timer_pending(&dum_hcd->timer)) + mod_timer(&dum_hcd->timer, jiffies + 1); + + done: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return rc; +} + +static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct dummy_hcd *dum_hcd; + unsigned long flags; + int rc; + + /* giveback happens automatically in timer callback, + * so make sure the callback happens */ + dum_hcd = hcd_to_dummy_hcd(hcd); + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING && + !list_empty(&dum_hcd->urbp_list)) + mod_timer(&dum_hcd->timer, jiffies); + + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return rc; +} + +static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req, + u32 len) +{ + void *ubuf, *rbuf; + struct urbp *urbp = urb->hcpriv; + int to_host; + struct sg_mapping_iter *miter = &urbp->miter; + u32 trans = 0; + u32 this_sg; + bool next_sg; + + to_host = usb_urb_dir_in(urb); + rbuf = req->req.buf + req->req.actual; + + if (!urb->num_sgs) { + ubuf = urb->transfer_buffer + urb->actual_length; + if (to_host) + memcpy(ubuf, rbuf, len); + else + memcpy(rbuf, ubuf, len); + return len; + } + + if (!urbp->miter_started) { + u32 flags = SG_MITER_ATOMIC; + + if (to_host) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(miter, urb->sg, urb->num_sgs, flags); + urbp->miter_started = 1; + } + next_sg = sg_miter_next(miter); + if (next_sg == false) { + WARN_ON_ONCE(1); + return -EINVAL; + } + do { + ubuf = miter->addr; + this_sg = min_t(u32, len, miter->length); + miter->consumed = this_sg; + trans += this_sg; + + if (to_host) + memcpy(ubuf, rbuf, this_sg); + else + memcpy(rbuf, ubuf, this_sg); + len -= this_sg; + + if (!len) + break; + next_sg = sg_miter_next(miter); + if (next_sg == false) { + WARN_ON_ONCE(1); + return -EINVAL; + } + + rbuf += this_sg; + } while (1); + + sg_miter_stop(miter); + return trans; +} + +/* transfer up to a frame's worth; caller must own lock */ +static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb, + struct dummy_ep *ep, int limit, int *status) +{ + struct dummy *dum = dum_hcd->dum; + struct dummy_request *req; + int sent = 0; + +top: + /* if there's no request queued, the device is NAKing; return */ + list_for_each_entry(req, &ep->queue, queue) { + unsigned host_len, dev_len, len; + int is_short, to_host; + int rescan = 0; + + if (dummy_ep_stream_en(dum_hcd, urb)) { + if ((urb->stream_id != req->req.stream_id)) + continue; + } + + /* 1..N packets of ep->ep.maxpacket each ... the last one + * may be short (including zero length). + * + * writer can send a zlp explicitly (length 0) or implicitly + * (length mod maxpacket zero, and 'zero' flag); they always + * terminate reads. + */ + host_len = urb->transfer_buffer_length - urb->actual_length; + dev_len = req->req.length - req->req.actual; + len = min(host_len, dev_len); + + /* FIXME update emulated data toggle too */ + + to_host = usb_urb_dir_in(urb); + if (unlikely(len == 0)) + is_short = 1; + else { + /* not enough bandwidth left? */ + if (limit < ep->ep.maxpacket && limit < len) + break; + len = min_t(unsigned, len, limit); + if (len == 0) + break; + + /* send multiple of maxpacket first, then remainder */ + if (len >= ep->ep.maxpacket) { + is_short = 0; + if (len % ep->ep.maxpacket) + rescan = 1; + len -= len % ep->ep.maxpacket; + } else { + is_short = 1; + } + + len = dummy_perform_transfer(urb, req, len); + + ep->last_io = jiffies; + if ((int)len < 0) { + req->req.status = len; + } else { + limit -= len; + sent += len; + urb->actual_length += len; + req->req.actual += len; + } + } + + /* short packets terminate, maybe with overflow/underflow. + * it's only really an error to write too much. + * + * partially filling a buffer optionally blocks queue advances + * (so completion handlers can clean up the queue) but we don't + * need to emulate such data-in-flight. + */ + if (is_short) { + if (host_len == dev_len) { + req->req.status = 0; + *status = 0; + } else if (to_host) { + req->req.status = 0; + if (dev_len > host_len) + *status = -EOVERFLOW; + else + *status = 0; + } else { + *status = 0; + if (host_len > dev_len) + req->req.status = -EOVERFLOW; + else + req->req.status = 0; + } + + /* + * many requests terminate without a short packet. + * send a zlp if demanded by flags. + */ + } else { + if (req->req.length == req->req.actual) { + if (req->req.zero && to_host) + rescan = 1; + else + req->req.status = 0; + } + if (urb->transfer_buffer_length == urb->actual_length) { + if (urb->transfer_flags & URB_ZERO_PACKET && + !to_host) + rescan = 1; + else + *status = 0; + } + } + + /* device side completion --> continuable */ + if (req->req.status != -EINPROGRESS) { + list_del_init(&req->queue); + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + + /* requests might have been unlinked... */ + rescan = 1; + } + + /* host side completion --> terminate */ + if (*status != -EINPROGRESS) + break; + + /* rescan to continue with any other queued i/o */ + if (rescan) + goto top; + } + return sent; +} + +static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep) +{ + int limit = ep->ep.maxpacket; + + if (dum->gadget.speed == USB_SPEED_HIGH) { + int tmp; + + /* high bandwidth mode */ + tmp = usb_endpoint_maxp_mult(ep->desc); + tmp *= 8 /* applies to entire frame */; + limit += limit * tmp; + } + if (dum->gadget.speed == USB_SPEED_SUPER) { + switch (usb_endpoint_type(ep->desc)) { + case USB_ENDPOINT_XFER_ISOC: + /* Sec. 4.4.8.2 USB3.0 Spec */ + limit = 3 * 16 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_INT: + /* Sec. 4.4.7.2 USB3.0 Spec */ + limit = 3 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_BULK: + default: + break; + } + } + return limit; +} + +#define is_active(dum_hcd) ((dum_hcd->port_status & \ + (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_SUSPEND)) \ + == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) + +static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address) +{ + int i; + + if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd : dum->hs_hcd))) + return NULL; + if (!dum->ints_enabled) + return NULL; + if ((address & ~USB_DIR_IN) == 0) + return &dum->ep[0]; + for (i = 1; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep[i]; + + if (!ep->desc) + continue; + if (ep->desc->bEndpointAddress == address) + return ep; + } + return NULL; +} + +#undef is_active + +#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE) +#define Dev_InRequest (Dev_Request | USB_DIR_IN) +#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) +#define Intf_InRequest (Intf_Request | USB_DIR_IN) +#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) +#define Ep_InRequest (Ep_Request | USB_DIR_IN) + + +/** + * handle_control_request() - handles all control transfers + * @dum_hcd: pointer to dummy (the_controller) + * @urb: the urb request to handle + * @setup: pointer to the setup data for a USB device control + * request + * @status: pointer to request handling status + * + * Return 0 - if the request was handled + * 1 - if the request wasn't handles + * error code on error + */ +static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, + struct usb_ctrlrequest *setup, + int *status) +{ + struct dummy_ep *ep2; + struct dummy *dum = dum_hcd->dum; + int ret_val = 1; + unsigned w_index; + unsigned w_value; + + w_index = le16_to_cpu(setup->wIndex); + w_value = le16_to_cpu(setup->wValue); + switch (setup->bRequest) { + case USB_REQ_SET_ADDRESS: + if (setup->bRequestType != Dev_Request) + break; + dum->address = w_value; + *status = 0; + dev_dbg(udc_dev(dum), "set_address = %d\n", + w_value); + ret_val = 0; + break; + case USB_REQ_SET_FEATURE: + if (setup->bRequestType == Dev_Request) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + case USB_DEVICE_B_HNP_ENABLE: + dum->gadget.b_hnp_enable = 1; + break; + case USB_DEVICE_A_HNP_SUPPORT: + dum->gadget.a_hnp_support = 1; + break; + case USB_DEVICE_A_ALT_HNP_SUPPORT: + dum->gadget.a_alt_hnp_support = 1; + break; + case USB_DEVICE_U1_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + default: + ret_val = -EOPNOTSUPP; + } + if (ret_val == 0) { + dum->devstatus |= (1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == Ep_Request) { + /* endpoint halt */ + ep2 = find_endpoint(dum, w_index); + if (!ep2 || ep2->ep.name == ep0name) { + ret_val = -EOPNOTSUPP; + break; + } + ep2->halted = 1; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_CLEAR_FEATURE: + if (setup->bRequestType == Dev_Request) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + w_value = USB_DEVICE_REMOTE_WAKEUP; + break; + case USB_DEVICE_U1_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + default: + ret_val = -EOPNOTSUPP; + break; + } + if (ret_val == 0) { + dum->devstatus &= ~(1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == Ep_Request) { + /* endpoint halt */ + ep2 = find_endpoint(dum, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + if (!ep2->wedged) + ep2->halted = 0; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_GET_STATUS: + if (setup->bRequestType == Dev_InRequest + || setup->bRequestType == Intf_InRequest + || setup->bRequestType == Ep_InRequest) { + char *buf; + /* + * device: remote wakeup, selfpowered + * interface: nothing + * endpoint: halt + */ + buf = (char *)urb->transfer_buffer; + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType == Ep_InRequest) { + ep2 = find_endpoint(dum, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + buf[0] = ep2->halted; + } else if (setup->bRequestType == + Dev_InRequest) { + buf[0] = (u8)dum->devstatus; + } else + buf[0] = 0; + } + if (urb->transfer_buffer_length > 1) + buf[1] = 0; + urb->actual_length = min_t(u32, 2, + urb->transfer_buffer_length); + ret_val = 0; + *status = 0; + } + break; + } + return ret_val; +} + +/* drive both sides of the transfers; looks like irq handlers to + * both drivers except the callbacks aren't in_irq(). + */ +static void dummy_timer(struct timer_list *t) +{ + struct dummy_hcd *dum_hcd = from_timer(dum_hcd, t, timer); + struct dummy *dum = dum_hcd->dum; + struct urbp *urbp, *tmp; + unsigned long flags; + int limit, total; + int i; + + /* simplistic model for one frame's bandwidth */ + /* FIXME: account for transaction and packet overhead */ + switch (dum->gadget.speed) { + case USB_SPEED_LOW: + total = 8/*bytes*/ * 12/*packets*/; + break; + case USB_SPEED_FULL: + total = 64/*bytes*/ * 19/*packets*/; + break; + case USB_SPEED_HIGH: + total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; + break; + case USB_SPEED_SUPER: + /* Bus speed is 500000 bytes/ms, so use a little less */ + total = 490000; + break; + default: /* Can't happen */ + dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); + total = 0; + break; + } + + /* FIXME if HZ != 1000 this will probably misbehave ... */ + + /* look at each urb queued by the host side driver */ + spin_lock_irqsave(&dum->lock, flags); + + if (!dum_hcd->udev) { + dev_err(dummy_dev(dum_hcd), + "timer fired with no URBs pending?\n"); + spin_unlock_irqrestore(&dum->lock, flags); + return; + } + dum_hcd->next_frame_urbp = NULL; + + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + if (!ep_info[i].name) + break; + dum->ep[i].already_seen = 0; + } + +restart: + list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) { + struct urb *urb; + struct dummy_request *req; + u8 address; + struct dummy_ep *ep = NULL; + int status = -EINPROGRESS; + + /* stop when we reach URBs queued after the timer interrupt */ + if (urbp == dum_hcd->next_frame_urbp) + break; + + urb = urbp->urb; + if (urb->unlinked) + goto return_urb; + else if (dum_hcd->rh_state != DUMMY_RH_RUNNING) + continue; + + /* Used up this frame's bandwidth? */ + if (total <= 0) + continue; + + /* find the gadget's ep for this request (if configured) */ + address = usb_pipeendpoint (urb->pipe); + if (usb_urb_dir_in(urb)) + address |= USB_DIR_IN; + ep = find_endpoint(dum, address); + if (!ep) { + /* set_configuration() disagreement */ + dev_dbg(dummy_dev(dum_hcd), + "no ep configured for urb %p\n", + urb); + status = -EPROTO; + goto return_urb; + } + + if (ep->already_seen) + continue; + ep->already_seen = 1; + if (ep == &dum->ep[0] && urb->error_count) { + ep->setup_stage = 1; /* a new urb */ + urb->error_count = 0; + } + if (ep->halted && !ep->setup_stage) { + /* NOTE: must not be iso! */ + dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n", + ep->ep.name, urb); + status = -EPIPE; + goto return_urb; + } + /* FIXME make sure both ends agree on maxpacket */ + + /* handle control requests */ + if (ep == &dum->ep[0] && ep->setup_stage) { + struct usb_ctrlrequest setup; + int value = 1; + + setup = *(struct usb_ctrlrequest *) urb->setup_packet; + /* paranoia, in case of stale queued data */ + list_for_each_entry(req, &ep->queue, queue) { + list_del_init(&req->queue); + req->req.status = -EOVERFLOW; + dev_dbg(udc_dev(dum), "stale req = %p\n", + req); + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + ep->already_seen = 0; + goto restart; + } + + /* gadget driver never sees set_address or operations + * on standard feature flags. some hardware doesn't + * even expose them. + */ + ep->last_io = jiffies; + ep->setup_stage = 0; + ep->halted = 0; + + value = handle_control_request(dum_hcd, urb, &setup, + &status); + + /* gadget driver handles all other requests. block + * until setup() returns; no reentrancy issues etc. + */ + if (value > 0) { + ++dum->callback_usage; + spin_unlock(&dum->lock); + value = dum->driver->setup(&dum->gadget, + &setup); + spin_lock(&dum->lock); + --dum->callback_usage; + + if (value >= 0) { + /* no delays (max 64KB data stage) */ + limit = 64*1024; + goto treat_control_like_bulk; + } + /* error, see below */ + } + + if (value < 0) { + if (value != -EOPNOTSUPP) + dev_dbg(udc_dev(dum), + "setup --> %d\n", + value); + status = -EPIPE; + urb->actual_length = 0; + } + + goto return_urb; + } + + /* non-control requests */ + limit = total; + switch (usb_pipetype(urb->pipe)) { + case PIPE_ISOCHRONOUS: + /* + * We don't support isochronous. But if we did, + * here are some of the issues we'd have to face: + * + * Is it urb->interval since the last xfer? + * Use urb->iso_frame_desc[i]. + * Complete whether or not ep has requests queued. + * Report random errors, to debug drivers. + */ + limit = max(limit, periodic_bytes(dum, ep)); + status = -EINVAL; /* fail all xfers */ + break; + + case PIPE_INTERRUPT: + /* FIXME is it urb->interval since the last xfer? + * this almost certainly polls too fast. + */ + limit = max(limit, periodic_bytes(dum, ep)); + fallthrough; + + default: +treat_control_like_bulk: + ep->last_io = jiffies; + total -= transfer(dum_hcd, urb, ep, limit, &status); + break; + } + + /* incomplete transfer? */ + if (status == -EINPROGRESS) + continue; + +return_urb: + list_del(&urbp->urbp_list); + kfree(urbp); + if (ep) + ep->already_seen = ep->setup_stage = 0; + + usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb); + spin_unlock(&dum->lock); + usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status); + spin_lock(&dum->lock); + + goto restart; + } + + if (list_empty(&dum_hcd->urbp_list)) { + usb_put_dev(dum_hcd->udev); + dum_hcd->udev = NULL; + } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { + /* want a 1 msec delay here */ + mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1)); + } + + spin_unlock_irqrestore(&dum->lock, flags); +} + +/*-------------------------------------------------------------------------*/ + +#define PORT_C_MASK \ + ((USB_PORT_STAT_C_CONNECTION \ + | USB_PORT_STAT_C_ENABLE \ + | USB_PORT_STAT_C_SUSPEND \ + | USB_PORT_STAT_C_OVERCURRENT \ + | USB_PORT_STAT_C_RESET) << 16) + +static int dummy_hub_status(struct usb_hcd *hcd, char *buf) +{ + struct dummy_hcd *dum_hcd; + unsigned long flags; + int retval = 0; + + dum_hcd = hcd_to_dummy_hcd(hcd); + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) + goto done; + + if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + set_link_state(dum_hcd); + } + + if ((dum_hcd->port_status & PORT_C_MASK) != 0) { + *buf = (1 << 1); + dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n", + dum_hcd->port_status); + retval = 1; + if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + } +done: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return retval; +} + +/* usb 3.0 root hub device descriptor */ +static struct { + struct usb_bos_descriptor bos; + struct usb_ss_cap_descriptor ss_cap; +} __packed usb3_bos_desc = { + + .bos = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), + .bNumDeviceCaps = 1, + }, + .ss_cap = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), + .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), + }, +}; + +static inline void +ss_hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = USB_DT_SS_HUB; + desc->bDescLength = 12; + desc->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM | + HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = 1; + desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ + desc->u.ss.DeviceRemovable = 0; +} + +static inline void hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = USB_DT_HUB; + desc->bDescLength = 9; + desc->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM | + HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = 1; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ +} + +static int dummy_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) { + struct dummy_hcd *dum_hcd; + int retval = 0; + unsigned long flags; + + if (!HCD_HW_ACCESSIBLE(hcd)) + return -ETIMEDOUT; + + dum_hcd = hcd_to_dummy_hcd(hcd); + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + switch (typeReq) { + case ClearHubFeature: + break; + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } + if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { + /* 20msec resume signaling */ + dum_hcd->resuming = 1; + dum_hcd->re_timeout = jiffies + + msecs_to_jiffies(20); + } + break; + case USB_PORT_FEAT_POWER: + dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) + dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status &= ~USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + dum_hcd->port_status &= ~(1 << wValue); + set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; + } + break; + case GetHubDescriptor: + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + dev_dbg(dummy_dev(dum_hcd), + "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + if (hcd->speed == HCD_USB3) + ss_hub_descriptor((struct usb_hub_descriptor *) buf); + else + hub_descriptor((struct usb_hub_descriptor *) buf); + break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if (hcd->speed != HCD_USB3) + goto error; + + if ((wValue >> 8) != USB_DT_BOS) + goto error; + + memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); + retval = sizeof(usb3_bos_desc); + break; + + case GetHubStatus: + *(__le32 *) buf = cpu_to_le32(0); + break; + case GetPortStatus: + if (wIndex != 1) + retval = -EPIPE; + + /* whoever resets or resumes must GetPortStatus to + * complete it!! + */ + if (dum_hcd->resuming && + time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + } + if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 && + time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_RESET; + if (dum_hcd->dum->pullup) { + dum_hcd->port_status |= USB_PORT_STAT_ENABLE; + + if (hcd->speed < HCD_USB3) { + switch (dum_hcd->dum->gadget.speed) { + case USB_SPEED_HIGH: + dum_hcd->port_status |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum_hcd->dum->gadget.ep0-> + maxpacket = 8; + dum_hcd->port_status |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + break; + } + } + } + } + set_link_state(dum_hcd); + ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status); + ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16); + break; + case SetHubFeature: + retval = -EPIPE; + break; + case SetPortFeature: + switch (wValue) { + case USB_PORT_FEAT_LINK_STATE: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_LINK_STATE req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* + * Since this is dummy we don't have an actual link so + * there is nothing to do for the SET_LINK_STATE cmd + */ + break; + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + /* TODO: add suspend/resume support! */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_U1/2_TIMEOUT req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + break; + case USB_PORT_FEAT_SUSPEND: + /* Applicable only for USB2.0 hub */ + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } + if (dum_hcd->active) { + dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; + + /* HNP would happen here; for now we + * assume b_bus_req is always true. + */ + set_link_state(dum_hcd); + if (((1 << USB_DEVICE_B_HNP_ENABLE) + & dum_hcd->dum->devstatus) != 0) + dev_dbg(dummy_dev(dum_hcd), + "no HNP yet!\n"); + } + break; + case USB_PORT_FEAT_POWER: + if (hcd->speed == HCD_USB3) + dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status |= USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_BH_PORT_RESET: + /* Applicable only for USB3.0 hub */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_BH_PORT_RESET req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + fallthrough; + case USB_PORT_FEAT_RESET: + if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) + break; + /* if it's already enabled, disable */ + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status = + (USB_SS_PORT_STAT_POWER | + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_RESET); + } else { + dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE + | USB_PORT_STAT_LOW_SPEED + | USB_PORT_STAT_HIGH_SPEED); + dum_hcd->port_status |= USB_PORT_STAT_RESET; + } + /* + * We want to reset device status. All but the + * Self powered feature + */ + dum_hcd->dum->devstatus &= + (1 << USB_DEVICE_SELF_POWERED); + /* + * FIXME USB3.0: what is the correct reset signaling + * interval? Is it still 50msec as for HS? + */ + dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; + default: + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; + } + break; + case GetPortErrorCount: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "GetPortErrorCount req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* We'll always return 0 since this is a dummy hub */ + *(__le32 *) buf = cpu_to_le32(0); + break; + case SetHubDepth: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "SetHubDepth req not supported for " + "USB 2.0 roothub\n"); + goto error; + } + break; + default: + dev_dbg(dummy_dev(dum_hcd), + "hub control req%04x v%04x i%04x l%d\n", + typeReq, wValue, wIndex, wLength); +error: + /* "protocol stall" on error */ + retval = -EPIPE; + } + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + + if ((dum_hcd->port_status & PORT_C_MASK) != 0) + usb_hcd_poll_rh_status(hcd); + return retval; +} + +static int dummy_bus_suspend(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock_irq(&dum_hcd->dum->lock); + dum_hcd->rh_state = DUMMY_RH_SUSPENDED; + set_link_state(dum_hcd); + hcd->state = HC_STATE_SUSPENDED; + spin_unlock_irq(&dum_hcd->dum->lock); + return 0; +} + +static int dummy_bus_resume(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + int rc = 0; + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock_irq(&dum_hcd->dum->lock); + if (!HCD_HW_ACCESSIBLE(hcd)) { + rc = -ESHUTDOWN; + } else { + dum_hcd->rh_state = DUMMY_RH_RUNNING; + set_link_state(dum_hcd); + if (!list_empty(&dum_hcd->urbp_list)) + mod_timer(&dum_hcd->timer, jiffies); + hcd->state = HC_STATE_RUNNING; + } + spin_unlock_irq(&dum_hcd->dum->lock); + return rc; +} + +/*-------------------------------------------------------------------------*/ + +static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) +{ + int ep = usb_pipeendpoint(urb->pipe); + + return scnprintf(buf, size, + "urb/%p %s ep%d%s%s len %d/%d\n", + urb, + ({ char *s; + switch (urb->dev->speed) { + case USB_SPEED_LOW: + s = "ls"; + break; + case USB_SPEED_FULL: + s = "fs"; + break; + case USB_SPEED_HIGH: + s = "hs"; + break; + case USB_SPEED_SUPER: + s = "ss"; + break; + default: + s = "?"; + break; + } s; }), + ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "", + ({ char *s; \ + switch (usb_pipetype(urb->pipe)) { \ + case PIPE_CONTROL: \ + s = ""; \ + break; \ + case PIPE_BULK: \ + s = "-bulk"; \ + break; \ + case PIPE_INTERRUPT: \ + s = "-int"; \ + break; \ + default: \ + s = "-iso"; \ + break; \ + } s; }), + urb->actual_length, urb->transfer_buffer_length); +} + +static ssize_t urbs_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + struct urbp *urbp; + size_t size = 0; + unsigned long flags; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) { + size_t temp; + + temp = show_urb(buf, PAGE_SIZE - size, urbp->urb); + buf += temp; + size += temp; + } + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + + return size; +} +static DEVICE_ATTR_RO(urbs); + +static int dummy_start_ss(struct dummy_hcd *dum_hcd) +{ + timer_setup(&dum_hcd->timer, dummy_timer, 0); + dum_hcd->rh_state = DUMMY_RH_RUNNING; + dum_hcd->stream_en_ep = 0; + INIT_LIST_HEAD(&dum_hcd->urbp_list); + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; + dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; + dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; +#ifdef CONFIG_USB_OTG + dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1; +#endif + return 0; + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); +} + +static int dummy_start(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + + /* + * HOST side init ... we emulate a root hub that'll only ever + * talk to one device (the gadget side). Also appears in sysfs, + * just like more familiar pci-based HCDs. + */ + if (!usb_hcd_is_primary_hcd(hcd)) + return dummy_start_ss(dum_hcd); + + spin_lock_init(&dum_hcd->dum->lock); + timer_setup(&dum_hcd->timer, dummy_timer, 0); + dum_hcd->rh_state = DUMMY_RH_RUNNING; + + INIT_LIST_HEAD(&dum_hcd->urbp_list); + + hcd->power_budget = POWER_BUDGET; + hcd->state = HC_STATE_RUNNING; + hcd->uses_new_polling = 1; + +#ifdef CONFIG_USB_OTG + hcd->self.otg_port = 1; +#endif + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); +} + +static void dummy_stop(struct usb_hcd *hcd) +{ + device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs); + dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n"); +} + +/*-------------------------------------------------------------------------*/ + +static int dummy_h_get_frame(struct usb_hcd *hcd) +{ + return dummy_g_get_frame(NULL); +} + +static int dummy_setup(struct usb_hcd *hcd) +{ + struct dummy *dum; + + dum = *((void **)dev_get_platdata(hcd->self.controller)); + hcd->self.sg_tablesize = ~0; + if (usb_hcd_is_primary_hcd(hcd)) { + dum->hs_hcd = hcd_to_dummy_hcd(hcd); + dum->hs_hcd->dum = dum; + /* + * Mark the first roothub as being USB 2.0. + * The USB 3.0 roothub will be registered later by + * dummy_hcd_probe() + */ + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + } else { + dum->ss_hcd = hcd_to_dummy_hcd(hcd); + dum->ss_hcd->dum = dum; + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; + } + return 0; +} + +/* Change a group of bulk endpoints to support multiple stream IDs */ +static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + unsigned long flags; + int max_stream; + int ret_streams = num_streams; + unsigned int index; + unsigned int i; + + if (!num_eps) + return -EINVAL; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + if ((1 << index) & dum_hcd->stream_en_ep) { + ret_streams = -EINVAL; + goto out; + } + max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp); + if (!max_stream) { + ret_streams = -EINVAL; + goto out; + } + if (max_stream < ret_streams) { + dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u " + "stream IDs.\n", + eps[i]->desc.bEndpointAddress, + max_stream); + ret_streams = max_stream; + } + } + + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + dum_hcd->stream_en_ep |= 1 << index; + set_max_streams_for_pipe(dum_hcd, + usb_endpoint_num(&eps[i]->desc), ret_streams); + } +out: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return ret_streams; +} + +/* Reverts a group of bulk endpoints back to not using stream IDs. */ +static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + unsigned long flags; + int ret; + unsigned int index; + unsigned int i; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + if (!((1 << index) & dum_hcd->stream_en_ep)) { + ret = -EINVAL; + goto out; + } + } + + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + dum_hcd->stream_en_ep &= ~(1 << index); + set_max_streams_for_pipe(dum_hcd, + usb_endpoint_num(&eps[i]->desc), 0); + } + ret = 0; +out: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return ret; +} + +static struct hc_driver dummy_hcd = { + .description = (char *) driver_name, + .product_desc = "Dummy host controller", + .hcd_priv_size = sizeof(struct dummy_hcd), + + .reset = dummy_setup, + .start = dummy_start, + .stop = dummy_stop, + + .urb_enqueue = dummy_urb_enqueue, + .urb_dequeue = dummy_urb_dequeue, + + .get_frame_number = dummy_h_get_frame, + + .hub_status_data = dummy_hub_status, + .hub_control = dummy_hub_control, + .bus_suspend = dummy_bus_suspend, + .bus_resume = dummy_bus_resume, + + .alloc_streams = dummy_alloc_streams, + .free_streams = dummy_free_streams, +}; + +static int dummy_hcd_probe(struct platform_device *pdev) +{ + struct dummy *dum; + struct usb_hcd *hs_hcd; + struct usb_hcd *ss_hcd; + int retval; + + dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dum = *((void **)dev_get_platdata(&pdev->dev)); + + if (mod_data.is_super_speed) + dummy_hcd.flags = HCD_USB3 | HCD_SHARED; + else if (mod_data.is_high_speed) + dummy_hcd.flags = HCD_USB2; + else + dummy_hcd.flags = HCD_USB11; + hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev)); + if (!hs_hcd) + return -ENOMEM; + hs_hcd->has_tt = 1; + + retval = usb_add_hcd(hs_hcd, 0, 0); + if (retval) + goto put_usb2_hcd; + + if (mod_data.is_super_speed) { + ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, + dev_name(&pdev->dev), hs_hcd); + if (!ss_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; + } + + retval = usb_add_hcd(ss_hcd, 0, 0); + if (retval) + goto put_usb3_hcd; + } + return 0; + +put_usb3_hcd: + usb_put_hcd(ss_hcd); +dealloc_usb2_hcd: + usb_remove_hcd(hs_hcd); +put_usb2_hcd: + usb_put_hcd(hs_hcd); + dum->hs_hcd = dum->ss_hcd = NULL; + return retval; +} + +static int dummy_hcd_remove(struct platform_device *pdev) +{ + struct dummy *dum; + + dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum; + + if (dum->ss_hcd) { + usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); + usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); + } + + usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); + usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); + + dum->hs_hcd = NULL; + dum->ss_hcd = NULL; + + return 0; +} + +static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd; + struct dummy_hcd *dum_hcd; + int rc = 0; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + hcd = platform_get_drvdata(pdev); + dum_hcd = hcd_to_dummy_hcd(hcd); + if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { + dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); + rc = -EBUSY; + } else + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + return rc; +} + +static int dummy_hcd_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + hcd = platform_get_drvdata(pdev); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + return 0; +} + +static struct platform_driver dummy_hcd_driver = { + .probe = dummy_hcd_probe, + .remove = dummy_hcd_remove, + .suspend = dummy_hcd_suspend, + .resume = dummy_hcd_resume, + .driver = { + .name = driver_name, + }, +}; + +/*-------------------------------------------------------------------------*/ +#define MAX_NUM_UDC 32 +static struct platform_device *the_udc_pdev[MAX_NUM_UDC]; +static struct platform_device *the_hcd_pdev[MAX_NUM_UDC]; + +static int __init init(void) +{ + int retval = -ENOMEM; + int i; + struct dummy *dum[MAX_NUM_UDC] = {}; + + if (usb_disabled()) + return -ENODEV; + + if (!mod_data.is_high_speed && mod_data.is_super_speed) + return -EINVAL; + + if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { + pr_err("Number of emulated UDC must be in range of 1...%d\n", + MAX_NUM_UDC); + return -EINVAL; + } + + for (i = 0; i < mod_data.num; i++) { + the_hcd_pdev[i] = platform_device_alloc(driver_name, i); + if (!the_hcd_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_hcd_pdev[i--]); + return retval; + } + } + for (i = 0; i < mod_data.num; i++) { + the_udc_pdev[i] = platform_device_alloc(gadget_name, i); + if (!the_udc_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_udc_pdev[i--]); + goto err_alloc_udc; + } + } + for (i = 0; i < mod_data.num; i++) { + dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); + if (!dum[i]) { + retval = -ENOMEM; + goto err_add_pdata; + } + retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + retval = platform_device_add_data(the_udc_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + } + + retval = platform_driver_register(&dummy_hcd_driver); + if (retval < 0) + goto err_add_pdata; + retval = platform_driver_register(&dummy_udc_driver); + if (retval < 0) + goto err_register_udc_driver; + + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_hcd_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_hcd_pdev[i--]); + goto err_add_hcd; + } + } + for (i = 0; i < mod_data.num; i++) { + if (!dum[i]->hs_hcd || + (!dum[i]->ss_hcd && mod_data.is_super_speed)) { + /* + * The hcd was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_udc_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_udc_pdev[i--]); + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + if (!platform_get_drvdata(the_udc_pdev[i])) { + /* + * The udc was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_probe_udc; + } + } + return retval; + +err_probe_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_udc_pdev[i]); +err_add_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_hcd_pdev[i]); +err_add_hcd: + platform_driver_unregister(&dummy_udc_driver); +err_register_udc_driver: + platform_driver_unregister(&dummy_hcd_driver); +err_add_pdata: + for (i = 0; i < mod_data.num; i++) + kfree(dum[i]); + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_udc_pdev[i]); +err_alloc_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_hcd_pdev[i]); + return retval; +} +module_init(init); + +static void __exit cleanup(void) +{ + int i; + + for (i = 0; i < mod_data.num; i++) { + struct dummy *dum; + + dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev)); + + platform_device_unregister(the_udc_pdev[i]); + platform_device_unregister(the_hcd_pdev[i]); + kfree(dum); + } + platform_driver_unregister(&dummy_udc_driver); + platform_driver_unregister(&dummy_hcd_driver); +} +module_exit(cleanup); |