summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_crtc.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm/drm_crtc.h')
-rw-r--r--include/drm/drm_crtc.h1269
1 files changed, 1269 insertions, 0 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
new file mode 100644
index 000000000..59b51a09c
--- /dev/null
+++ b/include/drm/drm_crtc.h
@@ -0,0 +1,1269 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007-2008 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef __DRM_CRTC_H__
+#define __DRM_CRTC_H__
+
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/hdmi.h>
+#include <linux/media-bus-format.h>
+#include <uapi/drm/drm_mode.h>
+#include <uapi/drm/drm_fourcc.h>
+#include <drm/drm_modeset_lock.h>
+#include <drm/drm_rect.h>
+#include <drm/drm_mode_object.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_property.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_color_mgmt.h>
+#include <drm/drm_debugfs_crc.h>
+#include <drm/drm_mode_config.h>
+
+struct drm_device;
+struct drm_mode_set;
+struct drm_file;
+struct drm_clip_rect;
+struct drm_printer;
+struct drm_self_refresh_data;
+struct device_node;
+struct dma_fence;
+struct edid;
+
+static inline int64_t U642I64(uint64_t val)
+{
+ return (int64_t)*((int64_t *)&val);
+}
+static inline uint64_t I642U64(int64_t val)
+{
+ return (uint64_t)*((uint64_t *)&val);
+}
+
+struct drm_crtc;
+struct drm_pending_vblank_event;
+struct drm_plane;
+struct drm_bridge;
+struct drm_atomic_state;
+
+struct drm_crtc_helper_funcs;
+struct drm_plane_helper_funcs;
+
+/**
+ * struct drm_crtc_state - mutable CRTC state
+ *
+ * Note that the distinction between @enable and @active is rather subtle:
+ * Flipping @active while @enable is set without changing anything else may
+ * never return in a failure from the &drm_mode_config_funcs.atomic_check
+ * callback. Userspace assumes that a DPMS On will always succeed. In other
+ * words: @enable controls resource assignment, @active controls the actual
+ * hardware state.
+ *
+ * The three booleans active_changed, connectors_changed and mode_changed are
+ * intended to indicate whether a full modeset is needed, rather than strictly
+ * describing what has changed in a commit. See also:
+ * drm_atomic_crtc_needs_modeset()
+ *
+ * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or
+ * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control
+ * state like @plane_mask so drivers not converted over to atomic helpers should
+ * not rely on these being accurate!
+ */
+struct drm_crtc_state {
+ /** @crtc: backpointer to the CRTC */
+ struct drm_crtc *crtc;
+
+ /**
+ * @enable: Whether the CRTC should be enabled, gates all other state.
+ * This controls reservations of shared resources. Actual hardware state
+ * is controlled by @active.
+ */
+ bool enable;
+
+ /**
+ * @active: Whether the CRTC is actively displaying (used for DPMS).
+ * Implies that @enable is set. The driver must not release any shared
+ * resources if @active is set to false but @enable still true, because
+ * userspace expects that a DPMS ON always succeeds.
+ *
+ * Hence drivers must not consult @active in their various
+ * &drm_mode_config_funcs.atomic_check callback to reject an atomic
+ * commit. They can consult it to aid in the computation of derived
+ * hardware state, since even in the DPMS OFF state the display hardware
+ * should be as much powered down as when the CRTC is completely
+ * disabled through setting @enable to false.
+ */
+ bool active;
+
+ /**
+ * @planes_changed: Planes on this crtc are updated. Used by the atomic
+ * helpers and drivers to steer the atomic commit control flow.
+ */
+ bool planes_changed : 1;
+
+ /**
+ * @mode_changed: @mode or @enable has been changed. Used by the atomic
+ * helpers and drivers to steer the atomic commit control flow. See also
+ * drm_atomic_crtc_needs_modeset().
+ *
+ * Drivers are supposed to set this for any CRTC state changes that
+ * require a full modeset. They can also reset it to false if e.g. a
+ * @mode change can be done without a full modeset by only changing
+ * scaler settings.
+ */
+ bool mode_changed : 1;
+
+ /**
+ * @active_changed: @active has been toggled. Used by the atomic
+ * helpers and drivers to steer the atomic commit control flow. See also
+ * drm_atomic_crtc_needs_modeset().
+ */
+ bool active_changed : 1;
+
+ /**
+ * @connectors_changed: Connectors to this crtc have been updated,
+ * either in their state or routing. Used by the atomic
+ * helpers and drivers to steer the atomic commit control flow. See also
+ * drm_atomic_crtc_needs_modeset().
+ *
+ * Drivers are supposed to set this as-needed from their own atomic
+ * check code, e.g. from &drm_encoder_helper_funcs.atomic_check
+ */
+ bool connectors_changed : 1;
+ /**
+ * @zpos_changed: zpos values of planes on this crtc have been updated.
+ * Used by the atomic helpers and drivers to steer the atomic commit
+ * control flow.
+ */
+ bool zpos_changed : 1;
+ /**
+ * @color_mgmt_changed: Color management properties have changed
+ * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and
+ * drivers to steer the atomic commit control flow.
+ */
+ bool color_mgmt_changed : 1;
+
+ /**
+ * @no_vblank:
+ *
+ * Reflects the ability of a CRTC to send VBLANK events. This state
+ * usually depends on the pipeline configuration. If set to true, DRM
+ * atomic helpers will send out a fake VBLANK event during display
+ * updates after all hardware changes have been committed. This is
+ * implemented in drm_atomic_helper_fake_vblank().
+ *
+ * One usage is for drivers and/or hardware without support for VBLANK
+ * interrupts. Such drivers typically do not initialize vblanking
+ * (i.e., call drm_vblank_init() with the number of CRTCs). For CRTCs
+ * without initialized vblanking, this field is set to true in
+ * drm_atomic_helper_check_modeset(), and a fake VBLANK event will be
+ * send out on each update of the display pipeline by
+ * drm_atomic_helper_fake_vblank().
+ *
+ * Another usage is CRTCs feeding a writeback connector operating in
+ * oneshot mode. In this case the fake VBLANK event is only generated
+ * when a job is queued to the writeback connector, and we want the
+ * core to fake VBLANK events when this part of the pipeline hasn't
+ * changed but others had or when the CRTC and connectors are being
+ * disabled.
+ *
+ * __drm_atomic_helper_crtc_duplicate_state() will not reset the value
+ * from the current state, the CRTC driver is then responsible for
+ * updating this field when needed.
+ *
+ * Note that the combination of &drm_crtc_state.event == NULL and
+ * &drm_crtc_state.no_blank == true is valid and usually used when the
+ * writeback connector attached to the CRTC has a new job queued. In
+ * this case the driver will send the VBLANK event on its own when the
+ * writeback job is complete.
+ */
+ bool no_vblank : 1;
+
+ /**
+ * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to
+ * this CRTC.
+ */
+ u32 plane_mask;
+
+ /**
+ * @connector_mask: Bitmask of drm_connector_mask(connector) of
+ * connectors attached to this CRTC.
+ */
+ u32 connector_mask;
+
+ /**
+ * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders
+ * attached to this CRTC.
+ */
+ u32 encoder_mask;
+
+ /**
+ * @adjusted_mode:
+ *
+ * Internal display timings which can be used by the driver to handle
+ * differences between the mode requested by userspace in @mode and what
+ * is actually programmed into the hardware.
+ *
+ * For drivers using &drm_bridge, this stores hardware display timings
+ * used between the CRTC and the first bridge. For other drivers, the
+ * meaning of the adjusted_mode field is purely driver implementation
+ * defined information, and will usually be used to store the hardware
+ * display timings used between the CRTC and encoder blocks.
+ */
+ struct drm_display_mode adjusted_mode;
+
+ /**
+ * @mode:
+ *
+ * Display timings requested by userspace. The driver should try to
+ * match the refresh rate as close as possible (but note that it's
+ * undefined what exactly is close enough, e.g. some of the HDMI modes
+ * only differ in less than 1% of the refresh rate). The active width
+ * and height as observed by userspace for positioning planes must match
+ * exactly.
+ *
+ * For external connectors where the sink isn't fixed (like with a
+ * built-in panel), this mode here should match the physical mode on the
+ * wire to the last details (i.e. including sync polarities and
+ * everything).
+ */
+ struct drm_display_mode mode;
+
+ /**
+ * @mode_blob: &drm_property_blob for @mode, for exposing the mode to
+ * atomic userspace.
+ */
+ struct drm_property_blob *mode_blob;
+
+ /**
+ * @degamma_lut:
+ *
+ * Lookup table for converting framebuffer pixel data before apply the
+ * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The
+ * blob (if not NULL) is an array of &struct drm_color_lut.
+ */
+ struct drm_property_blob *degamma_lut;
+
+ /**
+ * @ctm:
+ *
+ * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The
+ * blob (if not NULL) is a &struct drm_color_ctm.
+ */
+ struct drm_property_blob *ctm;
+
+ /**
+ * @gamma_lut:
+ *
+ * Lookup table for converting pixel data after the color conversion
+ * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not
+ * NULL) is an array of &struct drm_color_lut.
+ */
+ struct drm_property_blob *gamma_lut;
+
+ /**
+ * @target_vblank:
+ *
+ * Target vertical blank period when a page flip
+ * should take effect.
+ */
+ u32 target_vblank;
+
+ /**
+ * @async_flip:
+ *
+ * This is set when DRM_MODE_PAGE_FLIP_ASYNC is set in the legacy
+ * PAGE_FLIP IOCTL. It's not wired up for the atomic IOCTL itself yet.
+ */
+ bool async_flip;
+
+ /**
+ * @vrr_enabled:
+ *
+ * Indicates if variable refresh rate should be enabled for the CRTC.
+ * Support for the requested vrr state will depend on driver and
+ * hardware capabiltiy - lacking support is not treated as failure.
+ */
+ bool vrr_enabled;
+
+ /**
+ * @self_refresh_active:
+ *
+ * Used by the self refresh helpers to denote when a self refresh
+ * transition is occurring. This will be set on enable/disable callbacks
+ * when self refresh is being enabled or disabled. In some cases, it may
+ * not be desirable to fully shut off the crtc during self refresh.
+ * CRTC's can inspect this flag and determine the best course of action.
+ */
+ bool self_refresh_active;
+
+ /**
+ * @event:
+ *
+ * Optional pointer to a DRM event to signal upon completion of the
+ * state update. The driver must send out the event when the atomic
+ * commit operation completes. There are two cases:
+ *
+ * - The event is for a CRTC which is being disabled through this
+ * atomic commit. In that case the event can be send out any time
+ * after the hardware has stopped scanning out the current
+ * framebuffers. It should contain the timestamp and counter for the
+ * last vblank before the display pipeline was shut off. The simplest
+ * way to achieve that is calling drm_crtc_send_vblank_event()
+ * somewhen after drm_crtc_vblank_off() has been called.
+ *
+ * - For a CRTC which is enabled at the end of the commit (even when it
+ * undergoes an full modeset) the vblank timestamp and counter must
+ * be for the vblank right before the first frame that scans out the
+ * new set of buffers. Again the event can only be sent out after the
+ * hardware has stopped scanning out the old buffers.
+ *
+ * - Events for disabled CRTCs are not allowed, and drivers can ignore
+ * that case.
+ *
+ * For very simple hardware without VBLANK interrupt, enabling
+ * &struct drm_crtc_state.no_vblank makes DRM's atomic commit helpers
+ * send a fake VBLANK event at the end of the display update after all
+ * hardware changes have been applied. See
+ * drm_atomic_helper_fake_vblank().
+ *
+ * For more complex hardware this
+ * can be handled by the drm_crtc_send_vblank_event() function,
+ * which the driver should call on the provided event upon completion of
+ * the atomic commit. Note that if the driver supports vblank signalling
+ * and timestamping the vblank counters and timestamps must agree with
+ * the ones returned from page flip events. With the current vblank
+ * helper infrastructure this can be achieved by holding a vblank
+ * reference while the page flip is pending, acquired through
+ * drm_crtc_vblank_get() and released with drm_crtc_vblank_put().
+ * Drivers are free to implement their own vblank counter and timestamp
+ * tracking though, e.g. if they have accurate timestamp registers in
+ * hardware.
+ *
+ * For hardware which supports some means to synchronize vblank
+ * interrupt delivery with committing display state there's also
+ * drm_crtc_arm_vblank_event(). See the documentation of that function
+ * for a detailed discussion of the constraints it needs to be used
+ * safely.
+ *
+ * If the device can't notify of flip completion in a race-free way
+ * at all, then the event should be armed just after the page flip is
+ * committed. In the worst case the driver will send the event to
+ * userspace one frame too late. This doesn't allow for a real atomic
+ * update, but it should avoid tearing.
+ */
+ struct drm_pending_vblank_event *event;
+
+ /**
+ * @commit:
+ *
+ * This tracks how the commit for this update proceeds through the
+ * various phases. This is never cleared, except when we destroy the
+ * state, so that subsequent commits can synchronize with previous ones.
+ */
+ struct drm_crtc_commit *commit;
+
+ /** @state: backpointer to global drm_atomic_state */
+ struct drm_atomic_state *state;
+};
+
+/**
+ * struct drm_crtc_funcs - control CRTCs for a given device
+ *
+ * The drm_crtc_funcs structure is the central CRTC management structure
+ * in the DRM. Each CRTC controls one or more connectors (note that the name
+ * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
+ * connectors, not just CRTs).
+ *
+ * Each driver is responsible for filling out this structure at startup time,
+ * in addition to providing other modesetting features, like i2c and DDC
+ * bus accessors.
+ */
+struct drm_crtc_funcs {
+ /**
+ * @reset:
+ *
+ * Reset CRTC hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
+ * atomic state using this hook.
+ */
+ void (*reset)(struct drm_crtc *crtc);
+
+ /**
+ * @cursor_set:
+ *
+ * Update the cursor image. The cursor position is relative to the CRTC
+ * and can be partially or fully outside of the visible area.
+ *
+ * Note that contrary to all other KMS functions the legacy cursor entry
+ * points don't take a framebuffer object, but instead take directly a
+ * raw buffer object id from the driver's buffer manager (which is
+ * either GEM or TTM for current drivers).
+ *
+ * This entry point is deprecated, drivers should instead implement
+ * universal plane support and register a proper cursor plane using
+ * drm_crtc_init_with_planes().
+ *
+ * This callback is optional
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
+ uint32_t handle, uint32_t width, uint32_t height);
+
+ /**
+ * @cursor_set2:
+ *
+ * Update the cursor image, including hotspot information. The hotspot
+ * must not affect the cursor position in CRTC coordinates, but is only
+ * meant as a hint for virtualized display hardware to coordinate the
+ * guests and hosts cursor position. The cursor hotspot is relative to
+ * the cursor image. Otherwise this works exactly like @cursor_set.
+ *
+ * This entry point is deprecated, drivers should instead implement
+ * universal plane support and register a proper cursor plane using
+ * drm_crtc_init_with_planes().
+ *
+ * This callback is optional.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
+ uint32_t handle, uint32_t width, uint32_t height,
+ int32_t hot_x, int32_t hot_y);
+
+ /**
+ * @cursor_move:
+ *
+ * Update the cursor position. The cursor does not need to be visible
+ * when this hook is called.
+ *
+ * This entry point is deprecated, drivers should instead implement
+ * universal plane support and register a proper cursor plane using
+ * drm_crtc_init_with_planes().
+ *
+ * This callback is optional.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
+
+ /**
+ * @gamma_set:
+ *
+ * Set gamma on the CRTC.
+ *
+ * This callback is optional.
+ *
+ * Atomic drivers who want to support gamma tables should implement the
+ * atomic color management support, enabled by calling
+ * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma
+ * interface through the drm_atomic_helper_legacy_gamma_set()
+ * compatibility implementation.
+ */
+ int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+ uint32_t size,
+ struct drm_modeset_acquire_ctx *ctx);
+
+ /**
+ * @destroy:
+ *
+ * Clean up CRTC resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
+ * in DRM.
+ */
+ void (*destroy)(struct drm_crtc *crtc);
+
+ /**
+ * @set_config:
+ *
+ * This is the main legacy entry point to change the modeset state on a
+ * CRTC. All the details of the desired configuration are passed in a
+ * &struct drm_mode_set - see there for details.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_set_config() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_config)(struct drm_mode_set *set,
+ struct drm_modeset_acquire_ctx *ctx);
+
+ /**
+ * @page_flip:
+ *
+ * Legacy entry point to schedule a flip to the given framebuffer.
+ *
+ * Page flipping is a synchronization mechanism that replaces the frame
+ * buffer being scanned out by the CRTC with a new frame buffer during
+ * vertical blanking, avoiding tearing (except when requested otherwise
+ * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
+ * requests a page flip the DRM core verifies that the new frame buffer
+ * is large enough to be scanned out by the CRTC in the currently
+ * configured mode and then calls this hook with a pointer to the new
+ * frame buffer.
+ *
+ * The driver must wait for any pending rendering to the new framebuffer
+ * to complete before executing the flip. It should also wait for any
+ * pending rendering from other drivers if the underlying buffer is a
+ * shared dma-buf.
+ *
+ * An application can request to be notified when the page flip has
+ * completed. The drm core will supply a &struct drm_event in the event
+ * parameter in this case. This can be handled by the
+ * drm_crtc_send_vblank_event() function, which the driver should call on
+ * the provided event upon completion of the flip. Note that if
+ * the driver supports vblank signalling and timestamping the vblank
+ * counters and timestamps must agree with the ones returned from page
+ * flip events. With the current vblank helper infrastructure this can
+ * be achieved by holding a vblank reference while the page flip is
+ * pending, acquired through drm_crtc_vblank_get() and released with
+ * drm_crtc_vblank_put(). Drivers are free to implement their own vblank
+ * counter and timestamp tracking though, e.g. if they have accurate
+ * timestamp registers in hardware.
+ *
+ * This callback is optional.
+ *
+ * NOTE:
+ *
+ * Very early versions of the KMS ABI mandated that the driver must
+ * block (but not reject) any rendering to the old framebuffer until the
+ * flip operation has completed and the old framebuffer is no longer
+ * visible. This requirement has been lifted, and userspace is instead
+ * expected to request delivery of an event and wait with recycling old
+ * buffers until such has been received.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure. Note that if a
+ * page flip operation is already pending the callback should return
+ * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
+ * or just runtime disabled through DPMS respectively the new atomic
+ * "ACTIVE" state) should result in an -EINVAL error code. Note that
+ * drm_atomic_helper_page_flip() checks this already for atomic drivers.
+ */
+ int (*page_flip)(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t flags,
+ struct drm_modeset_acquire_ctx *ctx);
+
+ /**
+ * @page_flip_target:
+ *
+ * Same as @page_flip but with an additional parameter specifying the
+ * absolute target vertical blank period (as reported by
+ * drm_crtc_vblank_count()) when the flip should take effect.
+ *
+ * Note that the core code calls drm_crtc_vblank_get before this entry
+ * point, and will call drm_crtc_vblank_put if this entry point returns
+ * any non-0 error code. It's the driver's responsibility to call
+ * drm_crtc_vblank_put after this entry point returns 0, typically when
+ * the flip completes.
+ */
+ int (*page_flip_target)(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t flags, uint32_t target,
+ struct drm_modeset_acquire_ctx *ctx);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * CRTC.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties. For atomic drivers it is not used because
+ * property handling is done entirely in the DRM core.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_property)(struct drm_crtc *crtc,
+ struct drm_property *property, uint64_t val);
+
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this CRTC and return it.
+ * The core and helpers guarantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+ * cleaned up by calling the @atomic_destroy_state hook in this
+ * structure.
+ *
+ * This callback is mandatory for atomic drivers.
+ *
+ * Atomic drivers which don't subclass &struct drm_crtc_state should use
+ * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before &drm_crtc.state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
+ struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ *
+ * This callback is mandatory for atomic drivers.
+ */
+ void (*atomic_destroy_state)(struct drm_crtc *crtc,
+ struct drm_crtc_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_crtc_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which should never happen, the core only
+ * asks for properties attached to this CRTC). No other validation is
+ * allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
+ int (*atomic_set_property)(struct drm_crtc *crtc,
+ struct drm_crtc_state *state,
+ struct drm_property *property,
+ uint64_t val);
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETCRTC IOCTL.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_crtc_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which should never happen, the core only asks for
+ * properties attached to this CRTC).
+ */
+ int (*atomic_get_property)(struct drm_crtc *crtc,
+ const struct drm_crtc_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+
+ /**
+ * @late_register:
+ *
+ * This optional hook can be used to register additional userspace
+ * interfaces attached to the crtc like debugfs interfaces.
+ * It is called late in the driver load sequence from drm_dev_register().
+ * Everything added from this callback should be unregistered in
+ * the early_unregister callback.
+ *
+ * Returns:
+ *
+ * 0 on success, or a negative error code on failure.
+ */
+ int (*late_register)(struct drm_crtc *crtc);
+
+ /**
+ * @early_unregister:
+ *
+ * This optional hook should be used to unregister the additional
+ * userspace interfaces attached to the crtc from
+ * @late_register. It is called from drm_dev_unregister(),
+ * early in the driver unload sequence to disable userspace access
+ * before data structures are torndown.
+ */
+ void (*early_unregister)(struct drm_crtc *crtc);
+
+ /**
+ * @set_crc_source:
+ *
+ * Changes the source of CRC checksums of frames at the request of
+ * userspace, typically for testing purposes. The sources available are
+ * specific of each driver and a %NULL value indicates that CRC
+ * generation is to be switched off.
+ *
+ * When CRC generation is enabled, the driver should call
+ * drm_crtc_add_crc_entry() at each frame, providing any information
+ * that characterizes the frame contents in the crcN arguments, as
+ * provided from the configured source. Drivers must accept an "auto"
+ * source name that will select a default source for this CRTC.
+ *
+ * This may trigger an atomic modeset commit if necessary, to enable CRC
+ * generation.
+ *
+ * Note that "auto" can depend upon the current modeset configuration,
+ * e.g. it could pick an encoder or output specific CRC sampling point.
+ *
+ * This callback is optional if the driver does not support any CRC
+ * generation functionality.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_crc_source)(struct drm_crtc *crtc, const char *source);
+
+ /**
+ * @verify_crc_source:
+ *
+ * verifies the source of CRC checksums of frames before setting the
+ * source for CRC and during crc open. Source parameter can be NULL
+ * while disabling crc source.
+ *
+ * This callback is optional if the driver does not support any CRC
+ * generation functionality.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*verify_crc_source)(struct drm_crtc *crtc, const char *source,
+ size_t *values_cnt);
+ /**
+ * @get_crc_sources:
+ *
+ * Driver callback for getting a list of all the available sources for
+ * CRC generation. This callback depends upon verify_crc_source, So
+ * verify_crc_source callback should be implemented before implementing
+ * this. Driver can pass full list of available crc sources, this
+ * callback does the verification on each crc-source before passing it
+ * to userspace.
+ *
+ * This callback is optional if the driver does not support exporting of
+ * possible CRC sources list.
+ *
+ * RETURNS:
+ *
+ * a constant character pointer to the list of all the available CRC
+ * sources. On failure driver should return NULL. count should be
+ * updated with number of sources in list. if zero we don't process any
+ * source from the list.
+ */
+ const char *const *(*get_crc_sources)(struct drm_crtc *crtc,
+ size_t *count);
+
+ /**
+ * @atomic_print_state:
+ *
+ * If driver subclasses &struct drm_crtc_state, it should implement
+ * this optional hook for printing additional driver specific state.
+ *
+ * Do not call this directly, use drm_atomic_crtc_print_state()
+ * instead.
+ */
+ void (*atomic_print_state)(struct drm_printer *p,
+ const struct drm_crtc_state *state);
+
+ /**
+ * @get_vblank_counter:
+ *
+ * Driver callback for fetching a raw hardware vblank counter for the
+ * CRTC. It's meant to be used by new drivers as the replacement of
+ * &drm_driver.get_vblank_counter hook.
+ *
+ * This callback is optional. If a device doesn't have a hardware
+ * counter, the driver can simply leave the hook as NULL. The DRM core
+ * will account for missed vblank events while interrupts where disabled
+ * based on system timestamps.
+ *
+ * Wraparound handling and loss of events due to modesetting is dealt
+ * with in the DRM core code, as long as drivers call
+ * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
+ * enabling a CRTC.
+ *
+ * See also &drm_device.vblank_disable_immediate and
+ * &drm_device.max_vblank_count.
+ *
+ * Returns:
+ *
+ * Raw vblank counter value.
+ */
+ u32 (*get_vblank_counter)(struct drm_crtc *crtc);
+
+ /**
+ * @enable_vblank:
+ *
+ * Enable vblank interrupts for the CRTC. It's meant to be used by
+ * new drivers as the replacement of &drm_driver.enable_vblank hook.
+ *
+ * Returns:
+ *
+ * Zero on success, appropriate errno if the vblank interrupt cannot
+ * be enabled.
+ */
+ int (*enable_vblank)(struct drm_crtc *crtc);
+
+ /**
+ * @disable_vblank:
+ *
+ * Disable vblank interrupts for the CRTC. It's meant to be used by
+ * new drivers as the replacement of &drm_driver.disable_vblank hook.
+ */
+ void (*disable_vblank)(struct drm_crtc *crtc);
+
+ /**
+ * @get_vblank_timestamp:
+ *
+ * Called by drm_get_last_vbltimestamp(). Should return a precise
+ * timestamp when the most recent vblank interval ended or will end.
+ *
+ * Specifically, the timestamp in @vblank_time should correspond as
+ * closely as possible to the time when the first video scanline of
+ * the video frame after the end of vblank will start scanning out,
+ * the time immediately after end of the vblank interval. If the
+ * @crtc is currently inside vblank, this will be a time in the future.
+ * If the @crtc is currently scanning out a frame, this will be the
+ * past start time of the current scanout. This is meant to adhere
+ * to the OpenML OML_sync_control extension specification.
+ *
+ * Parameters:
+ *
+ * crtc:
+ * CRTC for which timestamp should be returned.
+ * max_error:
+ * Maximum allowable timestamp error in nanoseconds.
+ * Implementation should strive to provide timestamp
+ * with an error of at most max_error nanoseconds.
+ * Returns true upper bound on error for timestamp.
+ * vblank_time:
+ * Target location for returned vblank timestamp.
+ * in_vblank_irq:
+ * True when called from drm_crtc_handle_vblank(). Some drivers
+ * need to apply some workarounds for gpu-specific vblank irq quirks
+ * if flag is set.
+ *
+ * Returns:
+ *
+ * True on success, false on failure, which means the core should
+ * fallback to a simple timestamp taken in drm_crtc_handle_vblank().
+ */
+ bool (*get_vblank_timestamp)(struct drm_crtc *crtc,
+ int *max_error,
+ ktime_t *vblank_time,
+ bool in_vblank_irq);
+};
+
+/**
+ * struct drm_crtc - central CRTC control structure
+ *
+ * Each CRTC may have one or more connectors associated with it. This structure
+ * allows the CRTC to be controlled.
+ */
+struct drm_crtc {
+ /** @dev: parent DRM device */
+ struct drm_device *dev;
+ /** @port: OF node used by drm_of_find_possible_crtcs(). */
+ struct device_node *port;
+ /**
+ * @head:
+ *
+ * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list.
+ * Invariant over the lifetime of @dev and therefore does not need
+ * locking.
+ */
+ struct list_head head;
+
+ /** @name: human readable name, can be overwritten by the driver */
+ char *name;
+
+ /**
+ * @mutex:
+ *
+ * This provides a read lock for the overall CRTC state (mode, dpms
+ * state, ...) and a write lock for everything which can be update
+ * without a full modeset (fb, cursor data, CRTC properties ...). A full
+ * modeset also need to grab &drm_mode_config.connection_mutex.
+ *
+ * For atomic drivers specifically this protects @state.
+ */
+ struct drm_modeset_lock mutex;
+
+ /** @base: base KMS object for ID tracking etc. */
+ struct drm_mode_object base;
+
+ /**
+ * @primary:
+ * Primary plane for this CRTC. Note that this is only
+ * relevant for legacy IOCTL, it specifies the plane implicitly used by
+ * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance
+ * beyond that.
+ */
+ struct drm_plane *primary;
+
+ /**
+ * @cursor:
+ * Cursor plane for this CRTC. Note that this is only relevant for
+ * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR
+ * and SETCURSOR2 IOCTLs. It does not have any significance
+ * beyond that.
+ */
+ struct drm_plane *cursor;
+
+ /**
+ * @index: Position inside the mode_config.list, can be used as an array
+ * index. It is invariant over the lifetime of the CRTC.
+ */
+ unsigned index;
+
+ /**
+ * @cursor_x: Current x position of the cursor, used for universal
+ * cursor planes because the SETCURSOR IOCTL only can update the
+ * framebuffer without supplying the coordinates. Drivers should not use
+ * this directly, atomic drivers should look at &drm_plane_state.crtc_x
+ * of the cursor plane instead.
+ */
+ int cursor_x;
+ /**
+ * @cursor_y: Current y position of the cursor, used for universal
+ * cursor planes because the SETCURSOR IOCTL only can update the
+ * framebuffer without supplying the coordinates. Drivers should not use
+ * this directly, atomic drivers should look at &drm_plane_state.crtc_y
+ * of the cursor plane instead.
+ */
+ int cursor_y;
+
+ /**
+ * @enabled:
+ *
+ * Is this CRTC enabled? Should only be used by legacy drivers, atomic
+ * drivers should instead consult &drm_crtc_state.enable and
+ * &drm_crtc_state.active. Atomic drivers can update this by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ bool enabled;
+
+ /**
+ * @mode:
+ *
+ * Current mode timings. Should only be used by legacy drivers, atomic
+ * drivers should instead consult &drm_crtc_state.mode. Atomic drivers
+ * can update this by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ struct drm_display_mode mode;
+
+ /**
+ * @hwmode:
+ *
+ * Programmed mode in hw, after adjustments for encoders, crtc, panel
+ * scaling etc. Should only be used by legacy drivers, for high
+ * precision vblank timestamps in
+ * drm_crtc_vblank_helper_get_vblank_timestamp().
+ *
+ * Note that atomic drivers should not use this, but instead use
+ * &drm_crtc_state.adjusted_mode. And for high-precision timestamps
+ * drm_crtc_vblank_helper_get_vblank_timestamp() used
+ * &drm_vblank_crtc.hwmode,
+ * which is filled out by calling drm_calc_timestamping_constants().
+ */
+ struct drm_display_mode hwmode;
+
+ /**
+ * @x:
+ * x position on screen. Should only be used by legacy drivers, atomic
+ * drivers should look at &drm_plane_state.crtc_x of the primary plane
+ * instead. Updated by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ int x;
+ /**
+ * @y:
+ * y position on screen. Should only be used by legacy drivers, atomic
+ * drivers should look at &drm_plane_state.crtc_y of the primary plane
+ * instead. Updated by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ int y;
+
+ /** @funcs: CRTC control functions */
+ const struct drm_crtc_funcs *funcs;
+
+ /**
+ * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up
+ * by calling drm_mode_crtc_set_gamma_size().
+ */
+ uint32_t gamma_size;
+
+ /**
+ * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and
+ * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size().
+ */
+ uint16_t *gamma_store;
+
+ /** @helper_private: mid-layer private data */
+ const struct drm_crtc_helper_funcs *helper_private;
+
+ /** @properties: property tracking for this CRTC */
+ struct drm_object_properties properties;
+
+ /**
+ * @state:
+ *
+ * Current atomic state for this CRTC.
+ *
+ * This is protected by @mutex. Note that nonblocking atomic commits
+ * access the current CRTC state without taking locks. Either by going
+ * through the &struct drm_atomic_state pointers, see
+ * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and
+ * for_each_new_crtc_in_state(). Or through careful ordering of atomic
+ * commit operations as implemented in the atomic helpers, see
+ * &struct drm_crtc_commit.
+ */
+ struct drm_crtc_state *state;
+
+ /**
+ * @commit_list:
+ *
+ * List of &drm_crtc_commit structures tracking pending commits.
+ * Protected by @commit_lock. This list holds its own full reference,
+ * as does the ongoing commit.
+ *
+ * "Note that the commit for a state change is also tracked in
+ * &drm_crtc_state.commit. For accessing the immediately preceding
+ * commit in an atomic update it is recommended to just use that
+ * pointer in the old CRTC state, since accessing that doesn't need
+ * any locking or list-walking. @commit_list should only be used to
+ * stall for framebuffer cleanup that's signalled through
+ * &drm_crtc_commit.cleanup_done."
+ */
+ struct list_head commit_list;
+
+ /**
+ * @commit_lock:
+ *
+ * Spinlock to protect @commit_list.
+ */
+ spinlock_t commit_lock;
+
+#ifdef CONFIG_DEBUG_FS
+ /**
+ * @debugfs_entry:
+ *
+ * Debugfs directory for this CRTC.
+ */
+ struct dentry *debugfs_entry;
+#endif
+
+ /**
+ * @crc:
+ *
+ * Configuration settings of CRC capture.
+ */
+ struct drm_crtc_crc crc;
+
+ /**
+ * @fence_context:
+ *
+ * timeline context used for fence operations.
+ */
+ unsigned int fence_context;
+
+ /**
+ * @fence_lock:
+ *
+ * spinlock to protect the fences in the fence_context.
+ */
+ spinlock_t fence_lock;
+ /**
+ * @fence_seqno:
+ *
+ * Seqno variable used as monotonic counter for the fences
+ * created on the CRTC's timeline.
+ */
+ unsigned long fence_seqno;
+
+ /**
+ * @timeline_name:
+ *
+ * The name of the CRTC's fence timeline.
+ */
+ char timeline_name[32];
+
+ /**
+ * @self_refresh_data: Holds the state for the self refresh helpers
+ *
+ * Initialized via drm_self_refresh_helper_init().
+ */
+ struct drm_self_refresh_data *self_refresh_data;
+};
+
+/**
+ * struct drm_mode_set - new values for a CRTC config change
+ * @fb: framebuffer to use for new config
+ * @crtc: CRTC whose configuration we're about to change
+ * @mode: mode timings to use
+ * @x: position of this CRTC relative to @fb
+ * @y: position of this CRTC relative to @fb
+ * @connectors: array of connectors to drive with this CRTC if possible
+ * @num_connectors: size of @connectors array
+ *
+ * This represents a modeset configuration for the legacy SETCRTC ioctl and is
+ * also used internally. Atomic drivers instead use &drm_atomic_state.
+ */
+struct drm_mode_set {
+ struct drm_framebuffer *fb;
+ struct drm_crtc *crtc;
+ struct drm_display_mode *mode;
+
+ uint32_t x;
+ uint32_t y;
+
+ struct drm_connector **connectors;
+ size_t num_connectors;
+};
+
+#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
+
+__printf(6, 7)
+int drm_crtc_init_with_planes(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_plane *primary,
+ struct drm_plane *cursor,
+ const struct drm_crtc_funcs *funcs,
+ const char *name, ...);
+void drm_crtc_cleanup(struct drm_crtc *crtc);
+
+/**
+ * drm_crtc_index - find the index of a registered CRTC
+ * @crtc: CRTC to find index for
+ *
+ * Given a registered CRTC, return the index of that CRTC within a DRM
+ * device's list of CRTCs.
+ */
+static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc)
+{
+ return crtc->index;
+}
+
+/**
+ * drm_crtc_mask - find the mask of a registered CRTC
+ * @crtc: CRTC to find mask for
+ *
+ * Given a registered CRTC, return the mask bit of that CRTC for the
+ * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields.
+ */
+static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
+{
+ return 1 << drm_crtc_index(crtc);
+}
+
+int drm_mode_set_config_internal(struct drm_mode_set *set);
+struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
+
+/**
+ * drm_crtc_find - look up a CRTC object from its ID
+ * @dev: DRM device
+ * @file_priv: drm file to check for lease against.
+ * @id: &drm_mode_object ID
+ *
+ * This can be used to look up a CRTC from its userspace ID. Only used by
+ * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
+ * userspace interface should be done using &drm_property.
+ */
+static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
+ struct drm_file *file_priv,
+ uint32_t id)
+{
+ struct drm_mode_object *mo;
+ mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC);
+ return mo ? obj_to_crtc(mo) : NULL;
+}
+
+/**
+ * drm_for_each_crtc - iterate over all CRTCs
+ * @crtc: a &struct drm_crtc as the loop cursor
+ * @dev: the &struct drm_device
+ *
+ * Iterate over all CRTCs of @dev.
+ */
+#define drm_for_each_crtc(crtc, dev) \
+ list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
+
+#endif /* __DRM_CRTC_H__ */