summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_modes.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm/drm_modes.h')
-rw-r--r--include/drm/drm_modes.h508
1 files changed, 508 insertions, 0 deletions
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
new file mode 100644
index 000000000..cdf2a299c
--- /dev/null
+++ b/include/drm/drm_modes.h
@@ -0,0 +1,508 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007-2008 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ * Copyright © 2014 Intel Corporation
+ * Daniel Vetter <daniel.vetter@ffwll.ch>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef __DRM_MODES_H__
+#define __DRM_MODES_H__
+
+#include <linux/hdmi.h>
+
+#include <drm/drm_mode_object.h>
+#include <drm/drm_connector.h>
+
+struct videomode;
+
+/*
+ * Note on terminology: here, for brevity and convenience, we refer to connector
+ * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
+ * DVI, etc. And 'screen' refers to the whole of the visible display, which
+ * may span multiple monitors (and therefore multiple CRTC and connector
+ * structures).
+ */
+
+/**
+ * enum drm_mode_status - hardware support status of a mode
+ * @MODE_OK: Mode OK
+ * @MODE_HSYNC: hsync out of range
+ * @MODE_VSYNC: vsync out of range
+ * @MODE_H_ILLEGAL: mode has illegal horizontal timings
+ * @MODE_V_ILLEGAL: mode has illegal vertical timings
+ * @MODE_BAD_WIDTH: requires an unsupported linepitch
+ * @MODE_NOMODE: no mode with a matching name
+ * @MODE_NO_INTERLACE: interlaced mode not supported
+ * @MODE_NO_DBLESCAN: doublescan mode not supported
+ * @MODE_NO_VSCAN: multiscan mode not supported
+ * @MODE_MEM: insufficient video memory
+ * @MODE_VIRTUAL_X: mode width too large for specified virtual size
+ * @MODE_VIRTUAL_Y: mode height too large for specified virtual size
+ * @MODE_MEM_VIRT: insufficient video memory given virtual size
+ * @MODE_NOCLOCK: no fixed clock available
+ * @MODE_CLOCK_HIGH: clock required is too high
+ * @MODE_CLOCK_LOW: clock required is too low
+ * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
+ * @MODE_BAD_HVALUE: horizontal timing was out of range
+ * @MODE_BAD_VVALUE: vertical timing was out of range
+ * @MODE_BAD_VSCAN: VScan value out of range
+ * @MODE_HSYNC_NARROW: horizontal sync too narrow
+ * @MODE_HSYNC_WIDE: horizontal sync too wide
+ * @MODE_HBLANK_NARROW: horizontal blanking too narrow
+ * @MODE_HBLANK_WIDE: horizontal blanking too wide
+ * @MODE_VSYNC_NARROW: vertical sync too narrow
+ * @MODE_VSYNC_WIDE: vertical sync too wide
+ * @MODE_VBLANK_NARROW: vertical blanking too narrow
+ * @MODE_VBLANK_WIDE: vertical blanking too wide
+ * @MODE_PANEL: exceeds panel dimensions
+ * @MODE_INTERLACE_WIDTH: width too large for interlaced mode
+ * @MODE_ONE_WIDTH: only one width is supported
+ * @MODE_ONE_HEIGHT: only one height is supported
+ * @MODE_ONE_SIZE: only one resolution is supported
+ * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
+ * @MODE_NO_STEREO: stereo modes not supported
+ * @MODE_NO_420: ycbcr 420 modes not supported
+ * @MODE_STALE: mode has become stale
+ * @MODE_BAD: unspecified reason
+ * @MODE_ERROR: error condition
+ *
+ * This enum is used to filter out modes not supported by the driver/hardware
+ * combination.
+ */
+enum drm_mode_status {
+ MODE_OK = 0,
+ MODE_HSYNC,
+ MODE_VSYNC,
+ MODE_H_ILLEGAL,
+ MODE_V_ILLEGAL,
+ MODE_BAD_WIDTH,
+ MODE_NOMODE,
+ MODE_NO_INTERLACE,
+ MODE_NO_DBLESCAN,
+ MODE_NO_VSCAN,
+ MODE_MEM,
+ MODE_VIRTUAL_X,
+ MODE_VIRTUAL_Y,
+ MODE_MEM_VIRT,
+ MODE_NOCLOCK,
+ MODE_CLOCK_HIGH,
+ MODE_CLOCK_LOW,
+ MODE_CLOCK_RANGE,
+ MODE_BAD_HVALUE,
+ MODE_BAD_VVALUE,
+ MODE_BAD_VSCAN,
+ MODE_HSYNC_NARROW,
+ MODE_HSYNC_WIDE,
+ MODE_HBLANK_NARROW,
+ MODE_HBLANK_WIDE,
+ MODE_VSYNC_NARROW,
+ MODE_VSYNC_WIDE,
+ MODE_VBLANK_NARROW,
+ MODE_VBLANK_WIDE,
+ MODE_PANEL,
+ MODE_INTERLACE_WIDTH,
+ MODE_ONE_WIDTH,
+ MODE_ONE_HEIGHT,
+ MODE_ONE_SIZE,
+ MODE_NO_REDUCED,
+ MODE_NO_STEREO,
+ MODE_NO_420,
+ MODE_STALE = -3,
+ MODE_BAD = -2,
+ MODE_ERROR = -1
+};
+
+#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
+ .name = nm, .status = 0, .type = (t), .clock = (c), \
+ .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
+ .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
+ .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
+ .vscan = (vs), .flags = (f)
+
+/**
+ * DRM_SIMPLE_MODE - Simple display mode
+ * @hd: Horizontal resolution, width
+ * @vd: Vertical resolution, height
+ * @hd_mm: Display width in millimeters
+ * @vd_mm: Display height in millimeters
+ *
+ * This macro initializes a &drm_display_mode that only contains info about
+ * resolution and physical size.
+ */
+#define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
+ .type = DRM_MODE_TYPE_DRIVER, .clock = 1 /* pass validation */, \
+ .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
+ .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
+ .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
+ .height_mm = (vd_mm)
+
+#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
+#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
+
+#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
+
+#define DRM_MODE_MATCH_TIMINGS (1 << 0)
+#define DRM_MODE_MATCH_CLOCK (1 << 1)
+#define DRM_MODE_MATCH_FLAGS (1 << 2)
+#define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
+#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
+
+/**
+ * struct drm_display_mode - DRM kernel-internal display mode structure
+ * @hdisplay: horizontal display size
+ * @hsync_start: horizontal sync start
+ * @hsync_end: horizontal sync end
+ * @htotal: horizontal total size
+ * @hskew: horizontal skew?!
+ * @vdisplay: vertical display size
+ * @vsync_start: vertical sync start
+ * @vsync_end: vertical sync end
+ * @vtotal: vertical total size
+ * @vscan: vertical scan?!
+ * @crtc_hdisplay: hardware mode horizontal display size
+ * @crtc_hblank_start: hardware mode horizontal blank start
+ * @crtc_hblank_end: hardware mode horizontal blank end
+ * @crtc_hsync_start: hardware mode horizontal sync start
+ * @crtc_hsync_end: hardware mode horizontal sync end
+ * @crtc_htotal: hardware mode horizontal total size
+ * @crtc_hskew: hardware mode horizontal skew?!
+ * @crtc_vdisplay: hardware mode vertical display size
+ * @crtc_vblank_start: hardware mode vertical blank start
+ * @crtc_vblank_end: hardware mode vertical blank end
+ * @crtc_vsync_start: hardware mode vertical sync start
+ * @crtc_vsync_end: hardware mode vertical sync end
+ * @crtc_vtotal: hardware mode vertical total size
+ *
+ * The horizontal and vertical timings are defined per the following diagram.
+ *
+ * ::
+ *
+ *
+ * Active Front Sync Back
+ * Region Porch Porch
+ * <-----------------------><----------------><-------------><-------------->
+ * //////////////////////|
+ * ////////////////////// |
+ * ////////////////////// |.................. ................
+ * _______________
+ * <----- [hv]display ----->
+ * <------------- [hv]sync_start ------------>
+ * <--------------------- [hv]sync_end --------------------->
+ * <-------------------------------- [hv]total ----------------------------->*
+ *
+ * This structure contains two copies of timings. First are the plain timings,
+ * which specify the logical mode, as it would be for a progressive 1:1 scanout
+ * at the refresh rate userspace can observe through vblank timestamps. Then
+ * there's the hardware timings, which are corrected for interlacing,
+ * double-clocking and similar things. They are provided as a convenience, and
+ * can be appropriately computed using drm_mode_set_crtcinfo().
+ *
+ * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
+ */
+struct drm_display_mode {
+ /**
+ * @clock:
+ *
+ * Pixel clock in kHz.
+ */
+ int clock; /* in kHz */
+ u16 hdisplay;
+ u16 hsync_start;
+ u16 hsync_end;
+ u16 htotal;
+ u16 hskew;
+ u16 vdisplay;
+ u16 vsync_start;
+ u16 vsync_end;
+ u16 vtotal;
+ u16 vscan;
+ /**
+ * @flags:
+ *
+ * Sync and timing flags:
+ *
+ * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
+ * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
+ * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
+ * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
+ * - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
+ * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
+ * - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
+ * - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
+ * - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
+ * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
+ * - DRM_MODE_FLAG_BCAST: <deprecated>
+ * - DRM_MODE_FLAG_PIXMUX: <deprecated>
+ * - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
+ * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
+ *
+ * Additionally there's flags to specify how 3D modes are packed:
+ *
+ * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
+ * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
+ * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
+ * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
+ * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
+ * - DRM_MODE_FLAG_3D_L_DEPTH: ?
+ * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
+ * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
+ * parts.
+ * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
+ * right parts.
+ */
+ u32 flags;
+
+ /**
+ * @crtc_clock:
+ *
+ * Actual pixel or dot clock in the hardware. This differs from the
+ * logical @clock when e.g. using interlacing, double-clocking, stereo
+ * modes or other fancy stuff that changes the timings and signals
+ * actually sent over the wire.
+ *
+ * This is again in kHz.
+ *
+ * Note that with digital outputs like HDMI or DP there's usually a
+ * massive confusion between the dot clock and the signal clock at the
+ * bit encoding level. Especially when a 8b/10b encoding is used and the
+ * difference is exactly a factor of 10.
+ */
+ int crtc_clock;
+ u16 crtc_hdisplay;
+ u16 crtc_hblank_start;
+ u16 crtc_hblank_end;
+ u16 crtc_hsync_start;
+ u16 crtc_hsync_end;
+ u16 crtc_htotal;
+ u16 crtc_hskew;
+ u16 crtc_vdisplay;
+ u16 crtc_vblank_start;
+ u16 crtc_vblank_end;
+ u16 crtc_vsync_start;
+ u16 crtc_vsync_end;
+ u16 crtc_vtotal;
+
+ /**
+ * @width_mm:
+ *
+ * Addressable size of the output in mm, projectors should set this to
+ * 0.
+ */
+ u16 width_mm;
+
+ /**
+ * @height_mm:
+ *
+ * Addressable size of the output in mm, projectors should set this to
+ * 0.
+ */
+ u16 height_mm;
+
+ /**
+ * @type:
+ *
+ * A bitmask of flags, mostly about the source of a mode. Possible flags
+ * are:
+ *
+ * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
+ * resolution of an LCD panel. There should only be one preferred
+ * mode per connector at any given time.
+ * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
+ * them really. Drivers must set this bit for all modes they create
+ * and expose to userspace.
+ * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel
+ * command line.
+ *
+ * Plus a big list of flags which shouldn't be used at all, but are
+ * still around since these flags are also used in the userspace ABI.
+ * We no longer accept modes with these types though:
+ *
+ * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
+ * Use DRM_MODE_TYPE_DRIVER instead.
+ * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
+ * DRM_MODE_TYPE_PREFERRED instead.
+ * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
+ * which are stuck around for hysterical raisins only. No one has an
+ * idea what they were meant for. Don't use.
+ */
+ u8 type;
+
+ /**
+ * @expose_to_userspace:
+ *
+ * Indicates whether the mode is to be exposed to the userspace.
+ * This is to maintain a set of exposed modes while preparing
+ * user-mode's list in drm_mode_getconnector ioctl. The purpose of
+ * this only lies in the ioctl function, and is not to be used
+ * outside the function.
+ */
+ bool expose_to_userspace;
+
+ /**
+ * @head:
+ *
+ * struct list_head for mode lists.
+ */
+ struct list_head head;
+
+ /**
+ * @name:
+ *
+ * Human-readable name of the mode, filled out with drm_mode_set_name().
+ */
+ char name[DRM_DISPLAY_MODE_LEN];
+
+ /**
+ * @status:
+ *
+ * Status of the mode, used to filter out modes not supported by the
+ * hardware. See enum &drm_mode_status.
+ */
+ enum drm_mode_status status;
+
+ /**
+ * @picture_aspect_ratio:
+ *
+ * Field for setting the HDMI picture aspect ratio of a mode.
+ */
+ enum hdmi_picture_aspect picture_aspect_ratio;
+
+};
+
+/**
+ * DRM_MODE_FMT - printf string for &struct drm_display_mode
+ */
+#define DRM_MODE_FMT "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
+
+/**
+ * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
+ * @m: display mode
+ */
+#define DRM_MODE_ARG(m) \
+ (m)->name, drm_mode_vrefresh(m), (m)->clock, \
+ (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
+ (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
+ (m)->type, (m)->flags
+
+#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
+
+/**
+ * drm_mode_is_stereo - check for stereo mode flags
+ * @mode: drm_display_mode to check
+ *
+ * Returns:
+ * True if the mode is one of the stereo modes (like side-by-side), false if
+ * not.
+ */
+static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
+{
+ return mode->flags & DRM_MODE_FLAG_3D_MASK;
+}
+
+struct drm_connector;
+struct drm_cmdline_mode;
+
+struct drm_display_mode *drm_mode_create(struct drm_device *dev);
+void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
+void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
+ const struct drm_display_mode *in);
+int drm_mode_convert_umode(struct drm_device *dev,
+ struct drm_display_mode *out,
+ const struct drm_mode_modeinfo *in);
+void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
+void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
+bool drm_mode_is_420_only(const struct drm_display_info *display,
+ const struct drm_display_mode *mode);
+bool drm_mode_is_420_also(const struct drm_display_info *display,
+ const struct drm_display_mode *mode);
+bool drm_mode_is_420(const struct drm_display_info *display,
+ const struct drm_display_mode *mode);
+
+struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
+ int hdisplay, int vdisplay, int vrefresh,
+ bool reduced, bool interlaced,
+ bool margins);
+struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
+ int hdisplay, int vdisplay, int vrefresh,
+ bool interlaced, int margins);
+struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
+ int hdisplay, int vdisplay,
+ int vrefresh, bool interlaced,
+ int margins,
+ int GTF_M, int GTF_2C,
+ int GTF_K, int GTF_2J);
+void drm_display_mode_from_videomode(const struct videomode *vm,
+ struct drm_display_mode *dmode);
+void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
+ struct videomode *vm);
+void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
+int of_get_drm_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags,
+ int index);
+
+void drm_mode_set_name(struct drm_display_mode *mode);
+int drm_mode_vrefresh(const struct drm_display_mode *mode);
+void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
+ int *hdisplay, int *vdisplay);
+
+void drm_mode_set_crtcinfo(struct drm_display_mode *p,
+ int adjust_flags);
+void drm_mode_copy(struct drm_display_mode *dst,
+ const struct drm_display_mode *src);
+struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
+ const struct drm_display_mode *mode);
+bool drm_mode_match(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2,
+ unsigned int match_flags);
+bool drm_mode_equal(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2);
+bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2);
+bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2);
+
+/* for use by the crtc helper probe functions */
+enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev,
+ const struct drm_display_mode *mode);
+enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
+ int maxX, int maxY);
+enum drm_mode_status
+drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
+ struct drm_connector *connector);
+void drm_mode_prune_invalid(struct drm_device *dev,
+ struct list_head *mode_list, bool verbose);
+void drm_mode_sort(struct list_head *mode_list);
+void drm_connector_list_update(struct drm_connector *connector);
+
+/* parsing cmdline modes */
+bool
+drm_mode_parse_command_line_for_connector(const char *mode_option,
+ const struct drm_connector *connector,
+ struct drm_cmdline_mode *mode);
+struct drm_display_mode *
+drm_mode_create_from_cmdline_mode(struct drm_device *dev,
+ struct drm_cmdline_mode *cmd);
+
+#endif /* __DRM_MODES_H__ */