diff options
Diffstat (limited to 'include/linux/i3c/master.h')
-rw-r--r-- | include/linux/i3c/master.h | 655 |
1 files changed, 655 insertions, 0 deletions
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h new file mode 100644 index 000000000..9cb39d901 --- /dev/null +++ b/include/linux/i3c/master.h @@ -0,0 +1,655 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_MASTER_H +#define I3C_MASTER_H + +#include <asm/bitsperlong.h> + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/i3c/ccc.h> +#include <linux/i3c/device.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#define I3C_HOT_JOIN_ADDR 0x2 +#define I3C_BROADCAST_ADDR 0x7e +#define I3C_MAX_ADDR GENMASK(6, 0) + +struct i3c_master_controller; +struct i3c_bus; +struct i2c_device; +struct i3c_device; + +/** + * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor + * @node: node element used to insert the slot into the I2C or I3C device + * list + * @master: I3C master that instantiated this device. Will be used to do + * I2C/I3C transfers + * @master_priv: master private data assigned to the device. Can be used to + * add master specific information + * + * This structure is describing common I3C/I2C dev information. + */ +struct i3c_i2c_dev_desc { + struct list_head node; + struct i3c_master_controller *master; + void *master_priv; +}; + +#define I3C_LVR_I2C_INDEX_MASK GENMASK(7, 5) +#define I3C_LVR_I2C_INDEX(x) ((x) << 5) +#define I3C_LVR_I2C_FM_MODE BIT(4) + +#define I2C_MAX_ADDR GENMASK(6, 0) + +/** + * struct i2c_dev_boardinfo - I2C device board information + * @node: used to insert the boardinfo object in the I2C boardinfo list + * @base: regular I2C board information + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * This structure is used to attach board-level information to an I2C device. + * Each I2C device connected on the I3C bus should have one. + */ +struct i2c_dev_boardinfo { + struct list_head node; + struct i2c_board_info base; + u8 lvr; +}; + +/** + * struct i2c_dev_desc - I2C device descriptor + * @common: common part of the I2C device descriptor + * @boardinfo: pointer to the boardinfo attached to this I2C device + * @dev: I2C device object registered to the I2C framework + * @addr: I2C device address + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * Each I2C device connected on the bus will have an i2c_dev_desc. + * This object is created by the core and later attached to the controller + * using &struct_i3c_master_controller->ops->attach_i2c_dev(). + * + * &struct_i2c_dev_desc is the internal representation of an I2C device + * connected on an I3C bus. This object is also passed to all + * &struct_i3c_master_controller_ops hooks. + */ +struct i2c_dev_desc { + struct i3c_i2c_dev_desc common; + const struct i2c_dev_boardinfo *boardinfo; + struct i2c_client *dev; + u16 addr; + u8 lvr; +}; + +/** + * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot + * @work: work associated to this slot. The IBI handler will be called from + * there + * @dev: the I3C device that has generated this IBI + * @len: length of the payload associated to this IBI + * @data: payload buffer + * + * An IBI slot is an object pre-allocated by the controller and used when an + * IBI comes in. + * Every time an IBI comes in, the I3C master driver should find a free IBI + * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using + * i3c_master_queue_ibi(). + * + * How IBI slots are allocated is left to the I3C master driver, though, for + * simple kmalloc-based allocation, the generic IBI slot pool can be used. + */ +struct i3c_ibi_slot { + struct work_struct work; + struct i3c_dev_desc *dev; + unsigned int len; + void *data; +}; + +/** + * struct i3c_device_ibi_info - IBI information attached to a specific device + * @all_ibis_handled: used to be informed when no more IBIs are waiting to be + * processed. Used by i3c_device_disable_ibi() to wait for + * all IBIs to be dequeued + * @pending_ibis: count the number of pending IBIs. Each pending IBI has its + * work element queued to the controller workqueue + * @max_payload_len: maximum payload length for an IBI coming from this device. + * this value is specified when calling + * i3c_device_request_ibi() and should not change at run + * time. All messages IBIs exceeding this limit should be + * rejected by the master + * @num_slots: number of IBI slots reserved for this device + * @enabled: reflect the IBI status + * @handler: IBI handler specified at i3c_device_request_ibi() call time. This + * handler will be called from the controller workqueue, and as such + * is allowed to sleep (though it is recommended to process the IBI + * as fast as possible to not stall processing of other IBIs queued + * on the same workqueue). + * New I3C messages can be sent from the IBI handler + * + * The &struct_i3c_device_ibi_info object is allocated when + * i3c_device_request_ibi() is called and attached to a specific device. This + * object is here to manage IBIs coming from a specific I3C device. + * + * Note that this structure is the generic view of the IBI management + * infrastructure. I3C master drivers may have their own internal + * representation which they can associate to the device using + * controller-private data. + */ +struct i3c_device_ibi_info { + struct completion all_ibis_handled; + atomic_t pending_ibis; + unsigned int max_payload_len; + unsigned int num_slots; + unsigned int enabled; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +/** + * struct i3c_dev_boardinfo - I3C device board information + * @node: used to insert the boardinfo object in the I3C boardinfo list + * @init_dyn_addr: initial dynamic address requested by the FW. We provide no + * guarantee that the device will end up using this address, + * but try our best to assign this specific address to the + * device + * @static_addr: static address the I3C device listen on before it's been + * assigned a dynamic address by the master. Will be used during + * bus initialization to assign it a specific dynamic address + * before starting DAA (Dynamic Address Assignment) + * @pid: I3C Provisional ID exposed by the device. This is a unique identifier + * that may be used to attach boardinfo to i3c_dev_desc when the device + * does not have a static address + * @of_node: optional DT node in case the device has been described in the DT + * + * This structure is used to attach board-level information to an I3C device. + * Not all I3C devices connected on the bus will have a boardinfo. It's only + * needed if you want to attach extra resources to a device or assign it a + * specific dynamic address. + */ +struct i3c_dev_boardinfo { + struct list_head node; + u8 init_dyn_addr; + u8 static_addr; + u64 pid; + struct device_node *of_node; +}; + +/** + * struct i3c_dev_desc - I3C device descriptor + * @common: common part of the I3C device descriptor + * @info: I3C device information. Will be automatically filled when you create + * your device with i3c_master_add_i3c_dev_locked() + * @ibi_lock: lock used to protect the &struct_i3c_device->ibi + * @ibi: IBI info attached to a device. Should be NULL until + * i3c_device_request_ibi() is called + * @dev: pointer to the I3C device object exposed to I3C device drivers. This + * should never be accessed from I3C master controller drivers. Only core + * code should manipulate it in when updating the dev <-> desc link or + * when propagating IBI events to the driver + * @boardinfo: pointer to the boardinfo attached to this I3C device + * + * Internal representation of an I3C device. This object is only used by the + * core and passed to I3C master controller drivers when they're requested to + * do some operations on the device. + * The core maintains the link between the internal I3C dev descriptor and the + * object exposed to the I3C device drivers (&struct_i3c_device). + */ +struct i3c_dev_desc { + struct i3c_i2c_dev_desc common; + struct i3c_device_info info; + struct mutex ibi_lock; + struct i3c_device_ibi_info *ibi; + struct i3c_device *dev; + const struct i3c_dev_boardinfo *boardinfo; +}; + +/** + * struct i3c_device - I3C device object + * @dev: device object to register the I3C dev to the device model + * @desc: pointer to an i3c device descriptor object. This link is updated + * every time the I3C device is rediscovered with a different dynamic + * address assigned + * @bus: I3C bus this device is attached to + * + * I3C device object exposed to I3C device drivers. The takes care of linking + * this object to the relevant &struct_i3c_dev_desc one. + * All I3C devs on the I3C bus are represented, including I3C masters. For each + * of them, we have an instance of &struct i3c_device. + */ +struct i3c_device { + struct device dev; + struct i3c_dev_desc *desc; + struct i3c_bus *bus; +}; + +/* + * The I3C specification says the maximum number of devices connected on the + * bus is 11, but this number depends on external parameters like trace length, + * capacitive load per Device, and the types of Devices present on the Bus. + * I3C master can also have limitations, so this number is just here as a + * reference and should be adjusted on a per-controller/per-board basis. + */ +#define I3C_BUS_MAX_DEVS 11 + +#define I3C_BUS_MAX_I3C_SCL_RATE 12900000 +#define I3C_BUS_TYP_I3C_SCL_RATE 12500000 +#define I3C_BUS_I2C_FM_PLUS_SCL_RATE 1000000 +#define I3C_BUS_I2C_FM_SCL_RATE 400000 +#define I3C_BUS_TLOW_OD_MIN_NS 200 + +/** + * enum i3c_bus_mode - I3C bus mode + * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation + * expected + * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on + * the bus. The only impact in this mode is that the + * high SCL pulse has to stay below 50ns to trick I2C + * devices when transmitting I3C frames + * @I3C_BUS_MODE_MIXED_LIMITED: I2C devices without 50ns spike filter are + * present on the bus. However they allow + * compliance up to the maximum SDR SCL clock + * frequency. + * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present + * on the bus + */ +enum i3c_bus_mode { + I3C_BUS_MODE_PURE, + I3C_BUS_MODE_MIXED_FAST, + I3C_BUS_MODE_MIXED_LIMITED, + I3C_BUS_MODE_MIXED_SLOW, +}; + +/** + * enum i3c_addr_slot_status - I3C address slot status + * @I3C_ADDR_SLOT_FREE: address is free + * @I3C_ADDR_SLOT_RSVD: address is reserved + * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device + * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device + * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask + * + * On an I3C bus, addresses are assigned dynamically, and we need to know which + * addresses are free to use and which ones are already assigned. + * + * Addresses marked as reserved are those reserved by the I3C protocol + * (broadcast address, ...). + */ +enum i3c_addr_slot_status { + I3C_ADDR_SLOT_FREE, + I3C_ADDR_SLOT_RSVD, + I3C_ADDR_SLOT_I2C_DEV, + I3C_ADDR_SLOT_I3C_DEV, + I3C_ADDR_SLOT_STATUS_MASK = 3, +}; + +/** + * struct i3c_bus - I3C bus object + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master + * this can change over the time. Will be used to let a master + * know whether it needs to request bus ownership before sending + * a frame or not + * @id: bus ID. Assigned by the framework when register the bus + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and + * ease the DAA (Dynamic Address Assignment) procedure (see + * &enum i3c_addr_slot_status) + * @mode: bus mode (see &enum i3c_bus_mode) + * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv + * transfers + * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers + * @scl_rate: SCL signal rate for I3C and I2C mode + * @devs.i3c: contains a list of I3C device descriptors representing I3C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs.i2c: contains a list of I2C device descriptors representing I2C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs: 2 lists containing all I3C/I2C devices connected to the bus + * @lock: read/write lock on the bus. This is needed to protect against + * operations that have an impact on the whole bus and the devices + * connected to it. For example, when asking slaves to drop their + * dynamic address (RSTDAA CCC), we need to make sure no one is trying + * to send I3C frames to these devices. + * Note that this lock does not protect against concurrency between + * devices: several drivers can send different I3C/I2C frames through + * the same master in parallel. This is the responsibility of the + * master to guarantee that frames are actually sent sequentially and + * not interlaced + * + * The I3C bus is represented with its own object and not implicitly described + * by the I3C master to cope with the multi-master functionality, where one bus + * can be shared amongst several masters, each of them requesting bus ownership + * when they need to. + */ +struct i3c_bus { + struct i3c_dev_desc *cur_master; + int id; + unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG]; + enum i3c_bus_mode mode; + struct { + unsigned long i3c; + unsigned long i2c; + } scl_rate; + struct { + struct list_head i3c; + struct list_head i2c; + } devs; + struct rw_semaphore lock; +}; + +/** + * struct i3c_master_controller_ops - I3C master methods + * @bus_init: hook responsible for the I3C bus initialization. You should at + * least call master_set_info() from there and set the bus mode. + * You can also put controller specific initialization in there. + * This method is mandatory. + * @bus_cleanup: cleanup everything done in + * &i3c_master_controller_ops->bus_init(). + * This method is optional. + * @attach_i3c_dev: called every time an I3C device is attached to the bus. It + * can be after a DAA or when a device is statically declared + * by the FW, in which case it will only have a static address + * and the dynamic address will be 0. + * When this function is called, device information have not + * been retrieved yet. + * This is a good place to attach master controller specific + * data to I3C devices. + * This method is optional. + * @reattach_i3c_dev: called every time an I3C device has its addressed + * changed. It can be because the device has been powered + * down and has lost its address, or it can happen when a + * device had a static address and has been assigned a + * dynamic address with SETDASA. + * This method is optional. + * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure + * should send an ENTDAA CCC command and then add all devices + * discovered sure the DAA using i3c_master_add_i3c_dev_locked(). + * Add devices added with i3c_master_add_i3c_dev_locked() will then be + * attached or re-attached to the controller. + * This method is mandatory. + * @supports_ccc_cmd: should return true if the CCC command is supported, false + * otherwise. + * This method is optional, if not provided the core assumes + * all CCC commands are supported. + * @send_ccc_cmd: send a CCC command + * This method is mandatory. + * @priv_xfers: do one or several private I3C SDR transfers + * This method is mandatory. + * @attach_i2c_dev: called every time an I2C device is attached to the bus. + * This is a good place to attach master controller specific + * data to I2C devices. + * This method is optional. + * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c + * transfers, the core does not guarantee that buffers attached to + * the transfers are DMA-safe. If drivers want to have DMA-safe + * buffers, they should use the i2c_get_dma_safe_msg_buf() + * and i2c_put_dma_safe_msg_buf() helpers provided by the I2C + * framework. + * This method is mandatory. + * @request_ibi: attach an IBI handler to an I3C device. This implies defining + * an IBI handler and the constraints of the IBI (maximum payload + * length and number of pre-allocated slots). + * Some controllers support less IBI-capable devices than regular + * devices, so this method might return -%EBUSY if there's no + * more space for an extra IBI registration + * This method is optional. + * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI + * should have been disabled with ->disable_irq() prior to that + * This method is mandatory only if ->request_ibi is not NULL. + * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called + * prior to ->enable_ibi(). The controller should first enable + * the IBI on the controller end (for example, unmask the hardware + * IRQ) and then send the ENEC CCC command (with the IBI flag set) + * to the I3C device. + * This method is mandatory only if ->request_ibi is not NULL. + * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI + * flag set and then deactivate the hardware IRQ on the + * controller end. + * This method is mandatory only if ->request_ibi is not NULL. + * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been + * processed by its handler. The IBI slot should be put back + * in the IBI slot pool so that the controller can re-use it + * for a future IBI + * This method is mandatory only if ->request_ibi is not + * NULL. + */ +struct i3c_master_controller_ops { + int (*bus_init)(struct i3c_master_controller *master); + void (*bus_cleanup)(struct i3c_master_controller *master); + int (*attach_i3c_dev)(struct i3c_dev_desc *dev); + int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr); + void (*detach_i3c_dev)(struct i3c_dev_desc *dev); + int (*do_daa)(struct i3c_master_controller *master); + bool (*supports_ccc_cmd)(struct i3c_master_controller *master, + const struct i3c_ccc_cmd *cmd); + int (*send_ccc_cmd)(struct i3c_master_controller *master, + struct i3c_ccc_cmd *cmd); + int (*priv_xfers)(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + int (*attach_i2c_dev)(struct i2c_dev_desc *dev); + void (*detach_i2c_dev)(struct i2c_dev_desc *dev); + int (*i2c_xfers)(struct i2c_dev_desc *dev, + const struct i2c_msg *xfers, int nxfers); + int (*request_ibi)(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); + void (*free_ibi)(struct i3c_dev_desc *dev); + int (*enable_ibi)(struct i3c_dev_desc *dev); + int (*disable_ibi)(struct i3c_dev_desc *dev); + void (*recycle_ibi_slot)(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot); +}; + +/** + * struct i3c_master_controller - I3C master controller object + * @dev: device to be registered to the device-model + * @this: an I3C device object representing this master. This device will be + * added to the list of I3C devs available on the bus + * @i2c: I2C adapter used for backward compatibility. This adapter is + * registered to the I2C subsystem to be as transparent as possible to + * existing I2C drivers + * @ops: master operations. See &struct i3c_master_controller_ops + * @secondary: true if the master is a secondary master + * @init_done: true when the bus initialization is done + * @boardinfo.i3c: list of I3C boardinfo objects + * @boardinfo.i2c: list of I2C boardinfo objects + * @boardinfo: board-level information attached to devices connected on the bus + * @bus: I3C bus exposed by this master + * @wq: workqueue used to execute IBI handlers. Can also be used by master + * drivers if they need to postpone operations that need to take place + * in a thread context. Typical examples are Hot Join processing which + * requires taking the bus lock in maintenance, which in turn, can only + * be done from a sleep-able context + * + * A &struct i3c_master_controller has to be registered to the I3C subsystem + * through i3c_master_register(). None of &struct i3c_master_controller fields + * should be set manually, just pass appropriate values to + * i3c_master_register(). + */ +struct i3c_master_controller { + struct device dev; + struct i3c_dev_desc *this; + struct i2c_adapter i2c; + const struct i3c_master_controller_ops *ops; + unsigned int secondary : 1; + unsigned int init_done : 1; + struct { + struct list_head i3c; + struct list_head i2c; + } boardinfo; + struct i3c_bus bus; + struct workqueue_struct *wq; +}; + +/** + * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus + * @bus: the I3C bus + * @dev: an I2C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I2C devs present on the bus. + */ +#define i3c_bus_for_each_i2cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i2c, common.node) + +/** + * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus + * @bus: the I3C bus + * @dev: and I3C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I3C devs present on the bus. + */ +#define i3c_bus_for_each_i3cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i3c, common.node) + +int i3c_master_do_i2c_xfers(struct i3c_master_controller *master, + const struct i2c_msg *xfers, + int nxfers); + +int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_entdaa_locked(struct i3c_master_controller *master); +int i3c_master_defslvs_locked(struct i3c_master_controller *master); + +int i3c_master_get_free_addr(struct i3c_master_controller *master, + u8 start_addr); + +int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, + u8 addr); +int i3c_master_do_daa(struct i3c_master_controller *master); + +int i3c_master_set_info(struct i3c_master_controller *master, + const struct i3c_device_info *info); + +int i3c_master_register(struct i3c_master_controller *master, + struct device *parent, + const struct i3c_master_controller_ops *ops, + bool secondary); +int i3c_master_unregister(struct i3c_master_controller *master); + +/** + * i3c_dev_get_master_data() - get master private data attached to an I3C + * device descriptor + * @dev: the I3C device descriptor to get private data from + * + * Return: the private data previously attached with i3c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i3c_dev_set_master_data() - attach master private data to an I3C device + * descriptor + * @dev: the I3C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i3c_dev_get_master_data(). + */ +static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i2c_dev_get_master_data() - get master private data attached to an I2C + * device descriptor + * @dev: the I2C device descriptor to get private data from + * + * Return: the private data previously attached with i2c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i2c_dev_set_master_data() - attach master private data to an I2C device + * descriptor + * @dev: the I2C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i2c_device_get_master_data(). + */ +static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i3c_dev_get_master() - get master used to communicate with a device + * @dev: I3C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i3c_dev_get_master(struct i3c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i2c_dev_get_master() - get master used to communicate with a device + * @dev: I2C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i2c_dev_get_master(struct i2c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i3c_master_get_bus() - get the bus attached to a master + * @master: master object + * + * Return: the I3C bus @master is connected to + */ +static inline struct i3c_bus * +i3c_master_get_bus(struct i3c_master_controller *master) +{ + return &master->bus; +} + +struct i3c_generic_ibi_pool; + +struct i3c_generic_ibi_pool * +i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); +void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool); + +struct i3c_ibi_slot * +i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool); +void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, + struct i3c_ibi_slot *slot); + +void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot); + +struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev); + +#endif /* I3C_MASTER_H */ |