diff options
Diffstat (limited to 'include/linux/ssb/ssb.h')
-rw-r--r-- | include/linux/ssb/ssb.h | 682 |
1 files changed, 682 insertions, 0 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h new file mode 100644 index 000000000..0d5a2691e --- /dev/null +++ b/include/linux/ssb/ssb.h @@ -0,0 +1,682 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_SSB_H_ +#define LINUX_SSB_H_ + +#include <linux/device.h> +#include <linux/list.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/gpio.h> +#include <linux/mod_devicetable.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <linux/ssb/ssb_regs.h> + + +struct pcmcia_device; +struct ssb_bus; +struct ssb_driver; + +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; + u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + +struct ssb_sprom { + u8 revision; + u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ + u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ + u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ + u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */ + u8 et0phyaddr; /* MII address for enet0 */ + u8 et1phyaddr; /* MII address for enet1 */ + u8 et2phyaddr; /* MII address for enet2 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u8 et2mdcport; /* MDIO for enet2 */ + u16 dev_id; /* Device ID overriding e.g. PCI ID */ + u16 board_rev; /* Board revision number from SPROM. */ + u16 board_num; /* Board number from SPROM. */ + u16 board_type; /* Board type from SPROM. */ + u8 country_code; /* Country Code */ + char alpha2[2]; /* Country Code as two chars like EU or US */ + u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; + u16 pa1lob0; + u16 pa1lob1; + u16 pa1lob2; + u16 pa1hib0; + u16 pa1hib1; + u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ + u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ + u8 txpid2g[4]; /* 2GHz TX power index */ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ + s8 rxpo2g; /* 2GHz RX power offset */ + s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; + u8 bxa2g; /* 2GHz BX arch */ + u8 rssisav5g; /* 5GHz RSSI params */ + u8 rssismc5g; + u8 rssismf5g; + u8 bxa5g; /* 5GHz BX arch */ + u16 cck2gpo; /* CCK power offset */ + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ + u32 boardflags; + u32 boardflags2; + u32 boardflags3; + /* TODO: Switch all drivers to new u32 fields and drop below ones */ + u16 boardflags_lo; /* Board flags (bits 0-15) */ + u16 boardflags_hi; /* Board flags (bits 16-31) */ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + + struct ssb_sprom_core_pwr_info core_pwr_info[4]; + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ + struct { + s8 a0, a1, a2, a3; + } antenna_gain; + + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz2; + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz5; + } fem; + + u16 mcs2gpo[8]; + u16 mcs5gpo[8]; + u16 mcs5glpo[8]; + u16 mcs5ghpo[8]; + u8 opo; + + u8 rxgainerr2ga[3]; + u8 rxgainerr5gla[3]; + u8 rxgainerr5gma[3]; + u8 rxgainerr5gha[3]; + u8 rxgainerr5gua[3]; + + u8 noiselvl2ga[3]; + u8 noiselvl5gla[3]; + u8 noiselvl5gma[3]; + u8 noiselvl5gha[3]; + u8 noiselvl5gua[3]; + + u8 regrev; + u8 txchain; + u8 rxchain; + u8 antswitch; + u16 cddpo; + u16 stbcpo; + u16 bw40po; + u16 bwduppo; + + u8 tempthresh; + u8 tempoffset; + u16 rawtempsense; + u8 measpower; + u8 tempsense_slope; + u8 tempcorrx; + u8 tempsense_option; + u8 freqoffset_corr; + u8 iqcal_swp_dis; + u8 hw_iqcal_en; + u8 elna2g; + u8 elna5g; + u8 phycal_tempdelta; + u8 temps_period; + u8 temps_hysteresis; + u8 measpower1; + u8 measpower2; + u8 pcieingress_war; + + /* power per rate from sromrev 9 */ + u16 cckbw202gpo; + u16 cckbw20ul2gpo; + u32 legofdmbw202gpo; + u32 legofdmbw20ul2gpo; + u32 legofdmbw205glpo; + u32 legofdmbw20ul5glpo; + u32 legofdmbw205gmpo; + u32 legofdmbw20ul5gmpo; + u32 legofdmbw205ghpo; + u32 legofdmbw20ul5ghpo; + u32 mcsbw202gpo; + u32 mcsbw20ul2gpo; + u32 mcsbw402gpo; + u32 mcsbw205glpo; + u32 mcsbw20ul5glpo; + u32 mcsbw405glpo; + u32 mcsbw205gmpo; + u32 mcsbw20ul5gmpo; + u32 mcsbw405gmpo; + u32 mcsbw205ghpo; + u32 mcsbw20ul5ghpo; + u32 mcsbw405ghpo; + u16 mcs32po; + u16 legofdm40duppo; + u8 sar2g; + u8 sar5g; +}; + +/* Information about the PCB the circuitry is soldered on. */ +struct ssb_boardinfo { + u16 vendor; + u16 type; +}; + + +struct ssb_device; +/* Lowlevel read/write operations on the device MMIO. + * Internal, don't use that outside of ssb. */ +struct ssb_bus_ops { + u8 (*read8)(struct ssb_device *dev, u16 offset); + u16 (*read16)(struct ssb_device *dev, u16 offset); + u32 (*read32)(struct ssb_device *dev, u16 offset); + void (*write8)(struct ssb_device *dev, u16 offset, u8 value); + void (*write16)(struct ssb_device *dev, u16 offset, u16 value); + void (*write32)(struct ssb_device *dev, u16 offset, u32 value); +#ifdef CONFIG_SSB_BLOCKIO + void (*block_read)(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif +}; + + +/* Core-ID values. */ +#define SSB_DEV_CHIPCOMMON 0x800 +#define SSB_DEV_ILINE20 0x801 +#define SSB_DEV_SDRAM 0x803 +#define SSB_DEV_PCI 0x804 +#define SSB_DEV_MIPS 0x805 +#define SSB_DEV_ETHERNET 0x806 +#define SSB_DEV_V90 0x807 +#define SSB_DEV_USB11_HOSTDEV 0x808 +#define SSB_DEV_ADSL 0x809 +#define SSB_DEV_ILINE100 0x80A +#define SSB_DEV_IPSEC 0x80B +#define SSB_DEV_PCMCIA 0x80D +#define SSB_DEV_INTERNAL_MEM 0x80E +#define SSB_DEV_MEMC_SDRAM 0x80F +#define SSB_DEV_EXTIF 0x811 +#define SSB_DEV_80211 0x812 +#define SSB_DEV_MIPS_3302 0x816 +#define SSB_DEV_USB11_HOST 0x817 +#define SSB_DEV_USB11_DEV 0x818 +#define SSB_DEV_USB20_HOST 0x819 +#define SSB_DEV_USB20_DEV 0x81A +#define SSB_DEV_SDIO_HOST 0x81B +#define SSB_DEV_ROBOSWITCH 0x81C +#define SSB_DEV_PARA_ATA 0x81D +#define SSB_DEV_SATA_XORDMA 0x81E +#define SSB_DEV_ETHERNET_GBIT 0x81F +#define SSB_DEV_PCIE 0x820 +#define SSB_DEV_MIMO_PHY 0x821 +#define SSB_DEV_SRAM_CTRLR 0x822 +#define SSB_DEV_MINI_MACPHY 0x823 +#define SSB_DEV_ARM_1176 0x824 +#define SSB_DEV_ARM_7TDMI 0x825 +#define SSB_DEV_ARM_CM3 0x82A + +/* Vendor-ID values */ +#define SSB_VENDOR_BROADCOM 0x4243 + +/* Some kernel subsystems poke with dev->drvdata, so we must use the + * following ugly workaround to get from struct device to struct ssb_device */ +struct __ssb_dev_wrapper { + struct device dev; + struct ssb_device *sdev; +}; + +struct ssb_device { + /* Having a copy of the ops pointer in each dev struct + * is an optimization. */ + const struct ssb_bus_ops *ops; + + struct device *dev, *dma_dev; + + struct ssb_bus *bus; + struct ssb_device_id id; + + u8 core_index; + unsigned int irq; + + /* Internal-only stuff follows. */ + void *drvdata; /* Per-device data */ + void *devtypedata; /* Per-devicetype (eg 802.11) data */ +}; + +/* Go from struct device to struct ssb_device. */ +static inline +struct ssb_device * dev_to_ssb_dev(struct device *dev) +{ + struct __ssb_dev_wrapper *wrap; + wrap = container_of(dev, struct __ssb_dev_wrapper, dev); + return wrap->sdev; +} + +/* Device specific user data */ +static inline +void ssb_set_drvdata(struct ssb_device *dev, void *data) +{ + dev->drvdata = data; +} +static inline +void * ssb_get_drvdata(struct ssb_device *dev) +{ + return dev->drvdata; +} + +/* Devicetype specific user data. This is per device-type (not per device) */ +void ssb_set_devtypedata(struct ssb_device *dev, void *data); +static inline +void * ssb_get_devtypedata(struct ssb_device *dev) +{ + return dev->devtypedata; +} + + +struct ssb_driver { + const char *name; + const struct ssb_device_id *id_table; + + int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); + void (*remove)(struct ssb_device *dev); + int (*suspend)(struct ssb_device *dev, pm_message_t state); + int (*resume)(struct ssb_device *dev); + void (*shutdown)(struct ssb_device *dev); + + struct device_driver drv; +}; +#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + +extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +#define ssb_driver_register(drv) \ + __ssb_driver_register(drv, THIS_MODULE) + +extern void ssb_driver_unregister(struct ssb_driver *drv); + + + + +enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ +}; + +/* board_vendor */ +#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */ +#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ +#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ +/* board_type */ +#define SSB_BOARD_BCM94301CB 0x0406 +#define SSB_BOARD_BCM94301MP 0x0407 +#define SSB_BOARD_BU4309 0x040A +#define SSB_BOARD_BCM94309CB 0x040B +#define SSB_BOARD_BCM4309MP 0x040C +#define SSB_BOARD_BU4306 0x0416 +#define SSB_BOARD_BCM94306MP 0x0418 +#define SSB_BOARD_BCM4309G 0x0421 +#define SSB_BOARD_BCM4306CB 0x0417 +#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ +#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ +#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ +#define SSB_BOARD_BU4704SD 0x042E /* with sdram */ +#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ +#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ +#define SSB_BOARD_BU4318 0x0447 +#define SSB_BOARD_CB4318 0x0448 +#define SSB_BOARD_MPG4318 0x0449 +#define SSB_BOARD_MP4318 0x044A +#define SSB_BOARD_SD4318 0x044B +#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ +#define SSB_BOARD_BCM94303MP 0x044E +#define SSB_BOARD_BCM94306MPM 0x0450 +#define SSB_BOARD_BCM94306MPL 0x0453 +#define SSB_BOARD_PC4303 0x0454 /* pcmcia */ +#define SSB_BOARD_BCM94306MPLNA 0x0457 +#define SSB_BOARD_BCM94306MPH 0x045B +#define SSB_BOARD_BCM94306PCIV 0x045C +#define SSB_BOARD_BCM94318MPGH 0x0463 +#define SSB_BOARD_BU4311 0x0464 +#define SSB_BOARD_BCM94311MC 0x0465 +#define SSB_BOARD_BCM94311MCAG 0x0466 +/* 4321 boards */ +#define SSB_BOARD_BU4321 0x046B +#define SSB_BOARD_BU4321E 0x047C +#define SSB_BOARD_MP4321 0x046C +#define SSB_BOARD_CB2_4321 0x046D +#define SSB_BOARD_CB2_4321_AG 0x0066 +#define SSB_BOARD_MC4321 0x046E +/* 4325 boards */ +#define SSB_BOARD_BCM94325DEVBU 0x0490 +#define SSB_BOARD_BCM94325BGABU 0x0491 +#define SSB_BOARD_BCM94325SDGWB 0x0492 +#define SSB_BOARD_BCM94325SDGMDL 0x04AA +#define SSB_BOARD_BCM94325SDGMDL2 0x04C6 +#define SSB_BOARD_BCM94325SDGMDL3 0x04C9 +#define SSB_BOARD_BCM94325SDABGWBA 0x04E1 +/* 4322 boards */ +#define SSB_BOARD_BCM94322MC 0x04A4 +#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ +#define SSB_BOARD_BCM94322HM 0x04B0 +#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ +/* 4312 boards */ +#define SSB_BOARD_BU4312 0x048A +#define SSB_BOARD_BCM4312MCGSG 0x04B5 +/* chip_package */ +#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ +#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ +#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ + +#include <linux/ssb/ssb_driver_chipcommon.h> +#include <linux/ssb/ssb_driver_mips.h> +#include <linux/ssb/ssb_driver_extif.h> +#include <linux/ssb/ssb_driver_pci.h> + +struct ssb_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct ssb_bus_ops *ops; + + /* The core currently mapped into the MMIO window. + * Not valid on all host-buses. So don't use outside of SSB. */ + struct ssb_device *mapped_device; + union { + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ + u8 mapped_pcmcia_seg; + /* Current SSB base address window for SDIO. */ + u32 sdio_sbaddr; + }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; + + /* The host-bus this backplane is running on. */ + enum ssb_bustype bustype; + /* Pointers to the host-bus. Check bustype before using any of these pointers. */ + union { + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ + struct sdio_func *host_sdio; + }; + + /* See enum ssb_quirks */ + unsigned int quirks; + +#ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ + struct mutex sprom_mutex; +#endif + + /* ID information about the Chip. */ + u16 chip_id; + u8 chip_rev; + u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + + /* List of devices (cores) on the backplane. */ + struct ssb_device devices[SSB_MAX_NR_CORES]; + u8 nr_devices; + + /* Software ID number for this bus. */ + unsigned int busnumber; + + /* The ChipCommon device (if available). */ + struct ssb_chipcommon chipco; + /* The PCI-core device (if available). */ + struct ssb_pcicore pcicore; + /* The MIPS-core device (if available). */ + struct ssb_mipscore mipscore; + /* The EXTif-core device (if available). */ + struct ssb_extif extif; + + /* The following structure elements are not available in early + * SSB initialization. Though, they are available for regular + * registered drivers at any stage. So be careful when + * using them in the ssb core code. */ + + /* ID information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* Contents of the SPROM. */ + struct ssb_sprom sprom; + /* If the board has a cardbus slot, this is set to true. */ + bool has_cardbus_slot; + +#ifdef CONFIG_SSB_EMBEDDED + /* Lock for GPIO register access. */ + spinlock_t gpio_lock; + struct platform_device *watchdog; +#endif /* EMBEDDED */ +#ifdef CONFIG_SSB_DRIVER_GPIO + struct gpio_chip gpio; + struct irq_domain *irq_domain; +#endif /* DRIVER_GPIO */ + + /* Internal-only stuff follows. Do not touch. */ + struct list_head list; + /* Is the bus already powered up? */ + bool powered_up; + int power_warn_count; +}; + +enum ssb_quirks { + /* SDIO connected card requires performing a read after writing a 32-bit value */ + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), +}; + +/* The initialization-invariants. */ +struct ssb_init_invariants { + /* Versioning information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* The SPROM information. That's either stored in an + * EEPROM or NVRAM on the board. */ + struct ssb_sprom sprom; + /* If the board has a cardbus slot, this is set to true. */ + bool has_cardbus_slot; +}; +/* Type of function to fetch the invariants. */ +typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, + struct ssb_init_invariants *iv); + +/* Register SoC bus. */ +extern int ssb_bus_host_soc_register(struct ssb_bus *bus, + unsigned long baseaddr); +#ifdef CONFIG_SSB_PCIHOST +extern int ssb_bus_pcibus_register(struct ssb_bus *bus, + struct pci_dev *host_pci); +#endif /* CONFIG_SSB_PCIHOST */ +#ifdef CONFIG_SSB_PCMCIAHOST +extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr); +#endif /* CONFIG_SSB_PCMCIAHOST */ +#ifdef CONFIG_SSB_SDIOHOST +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, + struct sdio_func *sdio_func, + unsigned int quirks); +#endif /* CONFIG_SSB_SDIOHOST */ + + +extern void ssb_bus_unregister(struct ssb_bus *bus); + +/* Does the device have an SPROM? */ +extern bool ssb_is_sprom_available(struct ssb_bus *bus); + +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int ssb_arch_register_fallback_sprom( + int (*sprom_callback)(struct ssb_bus *bus, + struct ssb_sprom *out)); + +/* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +extern int ssb_bus_suspend(struct ssb_bus *bus); +/* Resume a SSB bus. + * Call this from the parent bus resume routine. */ +extern int ssb_bus_resume(struct ssb_bus *bus); + +extern u32 ssb_clockspeed(struct ssb_bus *bus); + +/* Is the device enabled in hardware? */ +int ssb_device_is_enabled(struct ssb_device *dev); +/* Enable a device and pass device-specific SSB_TMSLOW flags. + * If no device-specific flags are available, use 0. */ +void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); +/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ +void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); + + +/* Device MMIO register read/write functions. */ +static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read8(dev, offset); +} +static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read16(dev, offset); +} +static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read32(dev, offset); +} +static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) +{ + dev->ops->write8(dev, offset, value); +} +static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + dev->ops->write16(dev, offset, value); +} +static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + dev->ops->write32(dev, offset, value); +} +#ifdef CONFIG_SSB_BLOCKIO +static inline void ssb_block_read(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_read(dev, buffer, count, offset, reg_width); +} + +static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_write(dev, buffer, count, offset, reg_width); +} +#endif /* CONFIG_SSB_BLOCKIO */ + + +/* The SSB DMA API. Use this API for any DMA operation on the device. + * This API basically is a wrapper that calls the correct DMA API for + * the host device type the SSB device is attached to. */ + +/* Translation (routing) bits that need to be ORed to DMA + * addresses before they are given to a device. */ +extern u32 ssb_dma_translation(struct ssb_device *dev); +#define SSB_DMA_TRANSLATION_MASK 0xC0000000 +#define SSB_DMA_TRANSLATION_SHIFT 30 + +static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DEBUG + printk(KERN_ERR "SSB: BUG! Calling DMA API for " + "unsupported bustype %d\n", dev->bus->bustype); +#endif /* DEBUG */ +} + +#ifdef CONFIG_SSB_PCIHOST +/* PCI-host wrapper driver */ +extern int ssb_pcihost_register(struct pci_driver *driver); +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ + pci_unregister_driver(driver); +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ + if (sdev->bus->bustype == SSB_BUSTYPE_PCI) + pci_set_power_state(sdev->bus->host_pci, state); +} +#else +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ +} +#endif /* CONFIG_SSB_PCIHOST */ + + +/* If a driver is shutdown or suspended, call this to signal + * that the bus may be completely powered down. SSB will decide, + * if it's really time to power down the bus, based on if there + * are other devices that want to run. */ +extern int ssb_bus_may_powerdown(struct ssb_bus *bus); +/* Before initializing and enabling a device, call this to power-up the bus. + * If you want to allow use of dynamic-power-control, pass the flag. + * Otherwise static always-on powercontrol will be used. */ +extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + +extern void ssb_commit_settings(struct ssb_bus *bus); + +/* Various helper functions */ +extern u32 ssb_admatch_base(u32 adm); +extern u32 ssb_admatch_size(u32 adm); + +/* PCI device mapping and fixup routines. + * Called from the architecture pcibios init code. + * These are only available on SSB_EMBEDDED configurations. */ +#ifdef CONFIG_SSB_EMBEDDED +int ssb_pcibios_plat_dev_init(struct pci_dev *dev); +int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +#endif /* CONFIG_SSB_EMBEDDED */ + +#endif /* LINUX_SSB_H_ */ |