diff options
Diffstat (limited to 'include/target/target_core_fabric.h')
-rw-r--r-- | include/target/target_core_fabric.h | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h new file mode 100644 index 000000000..6adf4d71a --- /dev/null +++ b/include/target/target_core_fabric.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef TARGET_CORE_FABRIC_H +#define TARGET_CORE_FABRIC_H + +#include <linux/configfs.h> +#include <linux/types.h> +#include <target/target_core_base.h> + +struct target_core_fabric_ops { + struct module *module; + /* + * XXX: Special case for iscsi/iSCSI... + * If non-null, fabric_alias is used for matching target/$fabric + * ConfigFS paths. If null, fabric_name is used for this (see below). + */ + const char *fabric_alias; + /* + * fabric_name is used for matching target/$fabric ConfigFS paths + * without a fabric_alias (see above). It's also used for the ALUA state + * path and is stored on disk with PR state. + */ + const char *fabric_name; + size_t node_acl_size; + /* + * Limits number of scatterlist entries per SCF_SCSI_DATA_CDB payload. + * Setting this value tells target-core to enforce this limit, and + * report as INQUIRY EVPD=b0 MAXIMUM TRANSFER LENGTH. + * + * target-core will currently reset se_cmd->data_length to this + * maximum size, and set UNDERFLOW residual count if length exceeds + * this limit. + * + * XXX: Not all initiator hosts honor this block-limit EVPD + * XXX: Currently assumes single PAGE_SIZE per scatterlist entry + */ + u32 max_data_sg_nents; + char *(*tpg_get_wwn)(struct se_portal_group *); + u16 (*tpg_get_tag)(struct se_portal_group *); + u32 (*tpg_get_default_depth)(struct se_portal_group *); + int (*tpg_check_demo_mode)(struct se_portal_group *); + int (*tpg_check_demo_mode_cache)(struct se_portal_group *); + int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *); + int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *); + /* + * Optionally used by fabrics to allow demo-mode login, but not + * expose any TPG LUNs, and return 'not connected' in standard + * inquiry response + */ + int (*tpg_check_demo_mode_login_only)(struct se_portal_group *); + /* + * Optionally used as a configfs tunable to determine when + * target-core should signal the PROTECT=1 feature bit for + * backends that don't support T10-PI, so that either fabric + * HW offload or target-core emulation performs the associated + * WRITE_STRIP and READ_INSERT operations. + */ + int (*tpg_check_prot_fabric_only)(struct se_portal_group *); + u32 (*tpg_get_inst_index)(struct se_portal_group *); + /* + * Optional to release struct se_cmd and fabric dependent allocated + * I/O descriptor after command execution has finished. + * + * Returning 1 will signal a descriptor has been released. + * Returning 0 will signal a descriptor has not been released. + */ + int (*check_stop_free)(struct se_cmd *); + void (*release_cmd)(struct se_cmd *); + void (*close_session)(struct se_session *); + u32 (*sess_get_index)(struct se_session *); + /* + * Used only for SCSI fabrics that contain multi-value TransportIDs + * (like iSCSI). All other SCSI fabrics should set this to NULL. + */ + u32 (*sess_get_initiator_sid)(struct se_session *, + unsigned char *, u32); + int (*write_pending)(struct se_cmd *); + void (*set_default_node_attributes)(struct se_node_acl *); + int (*get_cmd_state)(struct se_cmd *); + int (*queue_data_in)(struct se_cmd *); + int (*queue_status)(struct se_cmd *); + void (*queue_tm_rsp)(struct se_cmd *); + void (*aborted_task)(struct se_cmd *); + /* + * fabric module calls for target_core_fabric_configfs.c + */ + struct se_wwn *(*fabric_make_wwn)(struct target_fabric_configfs *, + struct config_group *, const char *); + void (*fabric_drop_wwn)(struct se_wwn *); + void (*add_wwn_groups)(struct se_wwn *); + struct se_portal_group *(*fabric_make_tpg)(struct se_wwn *, + const char *); + void (*fabric_drop_tpg)(struct se_portal_group *); + int (*fabric_post_link)(struct se_portal_group *, + struct se_lun *); + void (*fabric_pre_unlink)(struct se_portal_group *, + struct se_lun *); + struct se_tpg_np *(*fabric_make_np)(struct se_portal_group *, + struct config_group *, const char *); + void (*fabric_drop_np)(struct se_tpg_np *); + int (*fabric_init_nodeacl)(struct se_node_acl *, const char *); + + struct configfs_attribute **tfc_discovery_attrs; + struct configfs_attribute **tfc_wwn_attrs; + struct configfs_attribute **tfc_tpg_base_attrs; + struct configfs_attribute **tfc_tpg_np_base_attrs; + struct configfs_attribute **tfc_tpg_attrib_attrs; + struct configfs_attribute **tfc_tpg_auth_attrs; + struct configfs_attribute **tfc_tpg_param_attrs; + struct configfs_attribute **tfc_tpg_nacl_base_attrs; + struct configfs_attribute **tfc_tpg_nacl_attrib_attrs; + struct configfs_attribute **tfc_tpg_nacl_auth_attrs; + struct configfs_attribute **tfc_tpg_nacl_param_attrs; + + /* + * Set this member variable to true if the SCSI transport protocol + * (e.g. iSCSI) requires that the Data-Out buffer is transferred in + * its entirety before a command is aborted. + */ + bool write_pending_must_be_called; +}; + +int target_register_template(const struct target_core_fabric_ops *fo); +void target_unregister_template(const struct target_core_fabric_ops *fo); + +int target_depend_item(struct config_item *item); +void target_undepend_item(struct config_item *item); + +struct se_session *target_setup_session(struct se_portal_group *, + unsigned int, unsigned int, enum target_prot_op prot_op, + const char *, void *, + int (*callback)(struct se_portal_group *, + struct se_session *, void *)); +void target_remove_session(struct se_session *); + +int transport_init_session(struct se_session *se_sess); +struct se_session *transport_alloc_session(enum target_prot_op); +int transport_alloc_session_tags(struct se_session *, unsigned int, + unsigned int); +void __transport_register_session(struct se_portal_group *, + struct se_node_acl *, struct se_session *, void *); +void transport_register_session(struct se_portal_group *, + struct se_node_acl *, struct se_session *, void *); +ssize_t target_show_dynamic_sessions(struct se_portal_group *, char *); +void transport_free_session(struct se_session *); +void target_spc2_release(struct se_node_acl *nacl); +void target_put_nacl(struct se_node_acl *); +void transport_deregister_session_configfs(struct se_session *); +void transport_deregister_session(struct se_session *); + + +void transport_init_se_cmd(struct se_cmd *, + const struct target_core_fabric_ops *, + struct se_session *, u32, int, int, unsigned char *, u64); +sense_reason_t transport_lookup_cmd_lun(struct se_cmd *); +sense_reason_t target_cmd_init_cdb(struct se_cmd *, unsigned char *); +sense_reason_t target_cmd_parse_cdb(struct se_cmd *); +int target_submit_cmd_map_sgls(struct se_cmd *, struct se_session *, + unsigned char *, unsigned char *, u64, u32, int, int, int, + struct scatterlist *, u32, struct scatterlist *, u32, + struct scatterlist *, u32); +int target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *, + unsigned char *, u64, u32, int, int, int); +int target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess, + unsigned char *sense, u64 unpacked_lun, + void *fabric_tmr_ptr, unsigned char tm_type, + gfp_t, u64, int); +int transport_handle_cdb_direct(struct se_cmd *); +sense_reason_t transport_generic_new_cmd(struct se_cmd *); + +void target_put_cmd_and_wait(struct se_cmd *cmd); +void target_execute_cmd(struct se_cmd *cmd); + +int transport_generic_free_cmd(struct se_cmd *, int); + +bool transport_wait_for_tasks(struct se_cmd *); +int transport_send_check_condition_and_sense(struct se_cmd *, + sense_reason_t, int); +int target_send_busy(struct se_cmd *cmd); +int target_get_sess_cmd(struct se_cmd *, bool); +int target_put_sess_cmd(struct se_cmd *); +void target_sess_cmd_list_set_waiting(struct se_session *); +void target_wait_for_sess_cmds(struct se_session *); +void target_show_cmd(const char *pfx, struct se_cmd *cmd); + +int core_alua_check_nonop_delay(struct se_cmd *); + +int core_tmr_alloc_req(struct se_cmd *, void *, u8, gfp_t); +void core_tmr_release_req(struct se_tmr_req *); +int transport_generic_handle_tmr(struct se_cmd *); +void transport_generic_request_failure(struct se_cmd *, sense_reason_t); +int transport_lookup_tmr_lun(struct se_cmd *); +void core_allocate_nexus_loss_ua(struct se_node_acl *acl); + +struct se_node_acl *core_tpg_get_initiator_node_acl(struct se_portal_group *tpg, + unsigned char *); +bool target_tpg_has_node_acl(struct se_portal_group *tpg, + const char *); +struct se_node_acl *core_tpg_check_initiator_node_acl(struct se_portal_group *, + unsigned char *); +int core_tpg_set_initiator_node_queue_depth(struct se_node_acl *, u32); +int core_tpg_set_initiator_node_tag(struct se_portal_group *, + struct se_node_acl *, const char *); +int core_tpg_register(struct se_wwn *, struct se_portal_group *, int); +int core_tpg_deregister(struct se_portal_group *); + +int target_alloc_sgl(struct scatterlist **sgl, unsigned int *nents, + u32 length, bool zero_page, bool chainable); +void target_free_sgl(struct scatterlist *sgl, int nents); + +/* + * The LIO target core uses DMA_TO_DEVICE to mean that data is going + * to the target (eg handling a WRITE) and DMA_FROM_DEVICE to mean + * that data is coming from the target (eg handling a READ). However, + * this is just the opposite of what we have to tell the DMA mapping + * layer -- eg when handling a READ, the HBA will have to DMA the data + * out of memory so it can send it to the initiator, which means we + * need to use DMA_TO_DEVICE when we map the data. + */ +static inline enum dma_data_direction +target_reverse_dma_direction(struct se_cmd *se_cmd) +{ + if (se_cmd->se_cmd_flags & SCF_BIDI) + return DMA_BIDIRECTIONAL; + + switch (se_cmd->data_direction) { + case DMA_TO_DEVICE: + return DMA_FROM_DEVICE; + case DMA_FROM_DEVICE: + return DMA_TO_DEVICE; + case DMA_NONE: + default: + return DMA_NONE; + } +} + +#endif /* TARGET_CORE_FABRICH */ |