1 files changed, 354 insertions, 0 deletions
diff --git a/sound/hda/hdac_component.c b/sound/hda/hdac_component.c
new file mode 100644
index 000000000..bb37e7e0b
--- /dev/null
+++ b/sound/hda/hdac_component.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0
+// hdac_component.c - routines for sync between HD-A core and DRM driver
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/component.h>
+#include <sound/core.h>
+#include <sound/hdaudio.h>
+#include <sound/hda_component.h>
+#include <sound/hda_register.h>
+
+static void hdac_acomp_release(struct device *dev, void *res)
+{
+}
+
+static struct drm_audio_component *hdac_get_acomp(struct device *dev)
+{
+	return devres_find(dev, hdac_acomp_release, NULL, NULL);
+}
+
+/**
+ * snd_hdac_set_codec_wakeup - Enable / disable HDMI/DP codec wakeup
+ * @bus: HDA core bus
+ * @enable: enable or disable the wakeup
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function should be called during the chip reset, also called at
+ * resume for updating STATESTS register read.
+ *
+ * Returns zero for success or a negative error code.
+ */
+int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable)
+{
+	struct drm_audio_component *acomp = bus->audio_component;
+
+	if (!acomp || !acomp->ops)
+		return -ENODEV;
+
+	if (!acomp->ops->codec_wake_override)
+		return 0;
+
+	dev_dbg(bus->dev, "%s codec wakeup\n",
+		enable ? "enable" : "disable");
+
+	acomp->ops->codec_wake_override(acomp->dev, enable);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_set_codec_wakeup);
+
+/**
+ * snd_hdac_display_power - Power up / down the power refcount
+ * @bus: HDA core bus
+ * @idx: HDA codec address, pass HDA_CODEC_IDX_CONTROLLER for controller
+ * @enable: power up or down
+ *
+ * This function is used by either HD-audio controller or codec driver that
+ * needs the interaction with graphics driver.
+ *
+ * This function updates the power status, and calls the get_power() and
+ * put_power() ops accordingly, toggling the codec wakeup, too.
+ */
+void snd_hdac_display_power(struct hdac_bus *bus, unsigned int idx, bool enable)
+{
+	struct drm_audio_component *acomp = bus->audio_component;
+
+	dev_dbg(bus->dev, "display power %s\n",
+		enable ? "enable" : "disable");
+
+	mutex_lock(&bus->lock);
+	if (enable)
+		set_bit(idx, &bus->display_power_status);
+	else
+		clear_bit(idx, &bus->display_power_status);
+
+	if (!acomp || !acomp->ops)
+		goto unlock;
+
+	if (bus->display_power_status) {
+		if (!bus->display_power_active) {
+			unsigned long cookie = -1;
+
+			if (acomp->ops->get_power)
+				cookie = acomp->ops->get_power(acomp->dev);
+
+			snd_hdac_set_codec_wakeup(bus, true);
+			snd_hdac_set_codec_wakeup(bus, false);
+			bus->display_power_active = cookie;
+		}
+	} else {
+		if (bus->display_power_active) {
+			unsigned long cookie = bus->display_power_active;
+
+			if (acomp->ops->put_power)
+				acomp->ops->put_power(acomp->dev, cookie);
+
+			bus->display_power_active = 0;
+		}
+	}
+ unlock:
+	mutex_unlock(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_display_power);
+
+/**
+ * snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate
+ * @codec: HDA codec
+ * @nid: the pin widget NID
+ * @dev_id: device identifier
+ * @rate: the sample rate to set
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function sets N/CTS value based on the given sample rate.
+ * Returns zero for success, or a negative error code.
+ */
+int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
+			     int dev_id, int rate)
+{
+	struct hdac_bus *bus = codec->bus;
+	struct drm_audio_component *acomp = bus->audio_component;
+	int port, pipe;
+
+	if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate)
+		return -ENODEV;
+	port = nid;
+	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
+		port = acomp->audio_ops->pin2port(codec, nid);
+		if (port < 0)
+			return -EINVAL;
+	}
+	pipe = dev_id;
+	return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
+
+/**
+ * snd_hdac_acomp_get_eld - Get the audio state and ELD via component
+ * @codec: HDA codec
+ * @nid: the pin widget NID
+ * @dev_id: device identifier
+ * @audio_enabled: the pointer to store the current audio state
+ * @buffer: the buffer pointer to store ELD bytes
+ * @max_bytes: the max bytes to be stored on @buffer
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function queries the current state of the audio on the given
+ * digital port and fetches the ELD bytes onto the given buffer.
+ * It returns the number of bytes for the total ELD data, zero for
+ * invalid ELD, or a negative error code.
+ *
+ * The return size is the total bytes required for the whole ELD bytes,
+ * thus it may be over @max_bytes.  If it's over @max_bytes, it implies
+ * that only a part of ELD bytes have been fetched.
+ */
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
+			   bool *audio_enabled, char *buffer, int max_bytes)
+{
+	struct hdac_bus *bus = codec->bus;
+	struct drm_audio_component *acomp = bus->audio_component;
+	int port, pipe;
+
+	if (!acomp || !acomp->ops || !acomp->ops->get_eld)
+		return -ENODEV;
+
+	port = nid;
+	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
+		port = acomp->audio_ops->pin2port(codec, nid);
+		if (port < 0)
+			return -EINVAL;
+	}
+	pipe = dev_id;
+	return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
+				   buffer, max_bytes);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
+
+static int hdac_component_master_bind(struct device *dev)
+{
+	struct drm_audio_component *acomp = hdac_get_acomp(dev);
+	int ret;
+
+	if (WARN_ON(!acomp))
+		return -EINVAL;
+
+	ret = component_bind_all(dev, acomp);
+	if (ret < 0)
+		return ret;
+
+	if (WARN_ON(!(acomp->dev && acomp->ops))) {
+		ret = -EINVAL;
+		goto out_unbind;
+	}
+
+	/* pin the module to avoid dynamic unbinding, but only if given */
+	if (!try_module_get(acomp->ops->owner)) {
+		ret = -ENODEV;
+		goto out_unbind;
+	}
+
+	if (acomp->audio_ops && acomp->audio_ops->master_bind) {
+		ret = acomp->audio_ops->master_bind(dev, acomp);
+		if (ret < 0)
+			goto module_put;
+	}
+
+	complete_all(&acomp->master_bind_complete);
+	return 0;
+
+ module_put:
+	module_put(acomp->ops->owner);
+out_unbind:
+	component_unbind_all(dev, acomp);
+	complete_all(&acomp->master_bind_complete);
+
+	return ret;
+}
+
+static void hdac_component_master_unbind(struct device *dev)
+{
+	struct drm_audio_component *acomp = hdac_get_acomp(dev);
+
+	if (acomp->audio_ops && acomp->audio_ops->master_unbind)
+		acomp->audio_ops->master_unbind(dev, acomp);
+	module_put(acomp->ops->owner);
+	component_unbind_all(dev, acomp);
+	WARN_ON(acomp->ops || acomp->dev);
+}
+
+static const struct component_master_ops hdac_component_master_ops = {
+	.bind = hdac_component_master_bind,
+	.unbind = hdac_component_master_unbind,
+};
+
+/**
+ * snd_hdac_acomp_register_notifier - Register audio component ops
+ * @bus: HDA core bus
+ * @aops: audio component ops
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function sets the given ops to be called by the graphics driver.
+ *
+ * Returns zero for success or a negative error code.
+ */
+int snd_hdac_acomp_register_notifier(struct hdac_bus *bus,
+				    const struct drm_audio_component_audio_ops *aops)
+{
+	if (!bus->audio_component)
+		return -ENODEV;
+
+	bus->audio_component->audio_ops = aops;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_acomp_register_notifier);
+
+/**
+ * snd_hdac_acomp_init - Initialize audio component
+ * @bus: HDA core bus
+ * @aops: audio component ops
+ * @match_master: match function for finding components
+ * @extra_size: Extra bytes to allocate
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function initializes and sets up the audio component to communicate
+ * with graphics driver.
+ *
+ * Unlike snd_hdac_i915_init(), this function doesn't synchronize with the
+ * binding with the DRM component.  Each caller needs to sync via master_bind
+ * audio_ops.
+ *
+ * Returns zero for success or a negative error code.
+ */
+int snd_hdac_acomp_init(struct hdac_bus *bus,
+			const struct drm_audio_component_audio_ops *aops,
+			int (*match_master)(struct device *, int, void *),
+			size_t extra_size)
+{
+	struct component_match *match = NULL;
+	struct device *dev = bus->dev;
+	struct drm_audio_component *acomp;
+	int ret;
+
+	if (WARN_ON(hdac_get_acomp(dev)))
+		return -EBUSY;
+
+	acomp = devres_alloc(hdac_acomp_release, sizeof(*acomp) + extra_size,
+			     GFP_KERNEL);
+	if (!acomp)
+		return -ENOMEM;
+	acomp->audio_ops = aops;
+	init_completion(&acomp->master_bind_complete);
+	bus->audio_component = acomp;
+	devres_add(dev, acomp);
+
+	component_match_add_typed(dev, &match, match_master, bus);
+	ret = component_master_add_with_match(dev, &hdac_component_master_ops,
+					      match);
+	if (ret < 0)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	bus->audio_component = NULL;
+	devres_destroy(dev, hdac_acomp_release, NULL, NULL);
+	dev_info(dev, "failed to add audio component master (%d)\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_acomp_init);
+
+/**
+ * snd_hdac_acomp_exit - Finalize audio component
+ * @bus: HDA core bus
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with graphics driver.
+ *
+ * This function releases the audio component that has been used.
+ *
+ * Returns zero for success or a negative error code.
+ */
+int snd_hdac_acomp_exit(struct hdac_bus *bus)
+{
+	struct device *dev = bus->dev;
+	struct drm_audio_component *acomp = bus->audio_component;
+
+	if (!acomp)
+		return 0;
+
+	if (WARN_ON(bus->display_power_active) && acomp->ops)
+		acomp->ops->put_power(acomp->dev, bus->display_power_active);
+
+	bus->display_power_active = 0;
+	bus->display_power_status = 0;
+
+	component_master_del(dev, &hdac_component_master_ops);
+
+	bus->audio_component = NULL;
+	devres_destroy(dev, hdac_acomp_release, NULL, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_acomp_exit);