1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
BCM2835 PM (Power domains, watchdog)
The PM block controls power domains and some reset lines, and includes
a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt
binding which covered some of PM's register range and functionality.
Required properties:
- compatible: Should be "brcm,bcm2835-pm"
- reg: Specifies base physical address and size of the two
register ranges ("PM" and "ASYNC_BRIDGE" in that
order)
- clocks: a) v3d: The V3D clock from CPRMAN
b) peri_image: The PERI_IMAGE clock from CPRMAN
c) h264: The H264 clock from CPRMAN
d) isp: The ISP clock from CPRMAN
- #reset-cells: Should be 1. This property follows the reset controller
bindings[1].
- #power-domain-cells: Should be 1. This property follows the power domain
bindings[2].
Optional properties:
- timeout-sec: Contains the watchdog timeout in seconds
- system-power-controller: Whether the watchdog is controlling the
system power. This node follows the power controller bindings[3].
[1] Documentation/devicetree/bindings/reset/reset.txt
[2] Documentation/devicetree/bindings/power/power-domain.yaml
[3] Documentation/devicetree/bindings/power/power-controller.txt
Example:
pm {
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>;
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
<&clocks BCM2835_CLOCK_ISP>;
clock-names = "v3d", "peri_image", "h264", "isp";
system-power-controller;
};
|