blob: 2082522b1c326069e3b622508669a4b77a33034d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
TCPCI(Typec port cotroller interface) binding
---------------------------------------------
Required properties:
- compatible: should be set one of following:
- "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
- reg: the i2c slave address of typec port controller device.
- interrupt-parent: the phandle to the interrupt controller which provides
the interrupt.
- interrupts: interrupt specification for tcpci alert.
Required sub-node:
- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
of connector node are specified in
Documentation/devicetree/bindings/connector/usb-connector.yaml
Example:
ptn5110@50 {
compatible = "nxp,ptn5110";
reg = <0x50>;
interrupt-parent = <&gpio3>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
usb_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
power-role = "dual";
try-power-role = "sink";
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
PDO_VAR(5000, 12000, 2000)>;
op-sink-microwatt = <10000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
usb_con_ss: endpoint {
remote-endpoint = <&usb3_data_ss>;
};
};
};
};
};
|