Adding upstream version 1:8.4p1.upstream/1%8.4p1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1002 insertions, 0 deletions

diff --git a/ssh.0 b/ssh.0
new file mode 100644
index 0000000..86ae537
--- /dev/null
+++ b/ssh.0
@@ -0,0 +1,1002 @@
+SSH(1)                      General Commands Manual                     SSH(1)
+
+NAME
+     ssh M-bM-^@M-^S OpenSSH remote login client
+
+SYNOPSIS
+     ssh [-46AaCfGgKkMNnqsTtVvXxYy] [-B bind_interface] [-b bind_address]
+         [-c cipher_spec] [-D [bind_address:]port] [-E log_file]
+         [-e escape_char] [-F configfile] [-I pkcs11] [-i identity_file]
+         [-J destination] [-L address] [-l login_name] [-m mac_spec]
+         [-O ctl_cmd] [-o option] [-p port] [-Q query_option] [-R address]
+         [-S ctl_path] [-W host:port] [-w local_tun[:remote_tun]] destination
+         [command]
+
+DESCRIPTION
+     ssh (SSH client) is a program for logging into a remote machine and for
+     executing commands on a remote machine.  It is intended to provide secure
+     encrypted communications between two untrusted hosts over an insecure
+     network.  X11 connections, arbitrary TCP ports and UNIX-domain sockets
+     can also be forwarded over the secure channel.
+
+     ssh connects and logs into the specified destination, which may be
+     specified as either [user@]hostname or a URI of the form
+     ssh://[user@]hostname[:port].  The user must prove his/her identity to
+     the remote machine using one of several methods (see below).
+
+     If a command is specified, it is executed on the remote host instead of a
+     login shell.
+
+     The options are as follows:
+
+     -4      Forces ssh to use IPv4 addresses only.
+
+     -6      Forces ssh to use IPv6 addresses only.
+
+     -A      Enables forwarding of connections from an authentication agent
+             such as ssh-agent(1).  This can also be specified on a per-host
+             basis in a configuration file.
+
+             Agent forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             agent's UNIX-domain socket) can access the local agent through
+             the forwarded connection.  An attacker cannot obtain key material
+             from the agent, however they can perform operations on the keys
+             that enable them to authenticate using the identities loaded into
+             the agent.  A safer alternative may be to use a jump host (see
+             -J).
+
+     -a      Disables forwarding of the authentication agent connection.
+
+     -B bind_interface
+             Bind to the address of bind_interface before attempting to
+             connect to the destination host.  This is only useful on systems
+             with more than one address.
+
+     -b bind_address
+             Use bind_address on the local machine as the source address of
+             the connection.  Only useful on systems with more than one
+             address.
+
+     -C      Requests compression of all data (including stdin, stdout,
+             stderr, and data for forwarded X11, TCP and UNIX-domain
+             connections).  The compression algorithm is the same used by
+             gzip(1).  Compression is desirable on modem lines and other slow
+             connections, but will only slow down things on fast networks.
+             The default value can be set on a host-by-host basis in the
+             configuration files; see the Compression option.
+
+     -c cipher_spec
+             Selects the cipher specification for encrypting the session.
+             cipher_spec is a comma-separated list of ciphers listed in order
+             of preference.  See the Ciphers keyword in ssh_config(5) for more
+             information.
+
+     -D [bind_address:]port
+             Specifies a local M-bM-^@M-^\dynamicM-bM-^@M-^] application-level port forwarding.
+             This works by allocating a socket to listen to port on the local
+             side, optionally bound to the specified bind_address.  Whenever a
+             connection is made to this port, the connection is forwarded over
+             the secure channel, and the application protocol is then used to
+             determine where to connect to from the remote machine.  Currently
+             the SOCKS4 and SOCKS5 protocols are supported, and ssh will act
+             as a SOCKS server.  Only root can forward privileged ports.
+             Dynamic port forwardings can also be specified in the
+             configuration file.
+
+             IPv6 addresses can be specified by enclosing the address in
+             square brackets.  Only the superuser can forward privileged
+             ports.  By default, the local port is bound in accordance with
+             the GatewayPorts setting.  However, an explicit bind_address may
+             be used to bind the connection to a specific address.  The
+             bind_address of M-bM-^@M-^\localhostM-bM-^@M-^] indicates that the listening port be
+             bound for local use only, while an empty address or M-bM-^@M-^X*M-bM-^@M-^Y indicates
+             that the port should be available from all interfaces.
+
+     -E log_file
+             Append debug logs to log_file instead of standard error.
+
+     -e escape_char
+             Sets the escape character for sessions with a pty (default: M-bM-^@M-^X~M-bM-^@M-^Y).
+             The escape character is only recognized at the beginning of a
+             line.  The escape character followed by a dot (M-bM-^@M-^X.M-bM-^@M-^Y) closes the
+             connection; followed by control-Z suspends the connection; and
+             followed by itself sends the escape character once.  Setting the
+             character to M-bM-^@M-^\noneM-bM-^@M-^] disables any escapes and makes the session
+             fully transparent.
+
+     -F configfile
+             Specifies an alternative per-user configuration file.  If a
+             configuration file is given on the command line, the system-wide
+             configuration file (/etc/ssh/ssh_config) will be ignored.  The
+             default for the per-user configuration file is ~/.ssh/config.  If
+             set to M-bM-^@M-^\noneM-bM-^@M-^], no configuration files will be read.
+
+     -f      Requests ssh to go to background just before command execution.
+             This is useful if ssh is going to ask for passwords or
+             passphrases, but the user wants it in the background.  This
+             implies -n.  The recommended way to start X11 programs at a
+             remote site is with something like ssh -f host xterm.
+
+             If the ExitOnForwardFailure configuration option is set to M-bM-^@M-^\yesM-bM-^@M-^],
+             then a client started with -f will wait for all remote port
+             forwards to be successfully established before placing itself in
+             the background.
+
+     -G      Causes ssh to print its configuration after evaluating Host and
+             Match blocks and exit.
+
+     -g      Allows remote hosts to connect to local forwarded ports.  If used
+             on a multiplexed connection, then this option must be specified
+             on the master process.
+
+     -I pkcs11
+             Specify the PKCS#11 shared library ssh should use to communicate
+             with a PKCS#11 token providing keys for user authentication.
+
+     -i identity_file
+             Selects a file from which the identity (private key) for public
+             key authentication is read.  The default is ~/.ssh/id_dsa,
+             ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519,
+             ~/.ssh/id_ed25519_sk and ~/.ssh/id_rsa.  Identity files may also
+             be specified on a per-host basis in the configuration file.  It
+             is possible to have multiple -i options (and multiple identities
+             specified in configuration files).  If no certificates have been
+             explicitly specified by the CertificateFile directive, ssh will
+             also try to load certificate information from the filename
+             obtained by appending -cert.pub to identity filenames.
+
+     -J destination
+             Connect to the target host by first making a ssh connection to
+             the jump host described by destination and then establishing a
+             TCP forwarding to the ultimate destination from there.  Multiple
+             jump hops may be specified separated by comma characters.  This
+             is a shortcut to specify a ProxyJump configuration directive.
+             Note that configuration directives supplied on the command-line
+             generally apply to the destination host and not any specified
+             jump hosts.  Use ~/.ssh/config to specify configuration for jump
+             hosts.
+
+     -K      Enables GSSAPI-based authentication and forwarding (delegation)
+             of GSSAPI credentials to the server.
+
+     -k      Disables forwarding (delegation) of GSSAPI credentials to the
+             server.
+
+     -L [bind_address:]port:host:hostport
+     -L [bind_address:]port:remote_socket
+     -L local_socket:host:hostport
+     -L local_socket:remote_socket
+             Specifies that connections to the given TCP port or Unix socket
+             on the local (client) host are to be forwarded to the given host
+             and port, or Unix socket, on the remote side.  This works by
+             allocating a socket to listen to either a TCP port on the local
+             side, optionally bound to the specified bind_address, or to a
+             Unix socket.  Whenever a connection is made to the local port or
+             socket, the connection is forwarded over the secure channel, and
+             a connection is made to either host port hostport, or the Unix
+             socket remote_socket, from the remote machine.
+
+             Port forwardings can also be specified in the configuration file.
+             Only the superuser can forward privileged ports.  IPv6 addresses
+             can be specified by enclosing the address in square brackets.
+
+             By default, the local port is bound in accordance with the
+             GatewayPorts setting.  However, an explicit bind_address may be
+             used to bind the connection to a specific address.  The
+             bind_address of M-bM-^@M-^\localhostM-bM-^@M-^] indicates that the listening port be
+             bound for local use only, while an empty address or M-bM-^@M-^X*M-bM-^@M-^Y indicates
+             that the port should be available from all interfaces.
+
+     -l login_name
+             Specifies the user to log in as on the remote machine.  This also
+             may be specified on a per-host basis in the configuration file.
+
+     -M      Places the ssh client into M-bM-^@M-^\masterM-bM-^@M-^] mode for connection sharing.
+             Multiple -M options places ssh into M-bM-^@M-^\masterM-bM-^@M-^] mode but with
+             confirmation required using ssh-askpass(1) before each operation
+             that changes the multiplexing state (e.g. opening a new session).
+             Refer to the description of ControlMaster in ssh_config(5) for
+             details.
+
+     -m mac_spec
+             A comma-separated list of MAC (message authentication code)
+             algorithms, specified in order of preference.  See the MACs
+             keyword for more information.
+
+     -N      Do not execute a remote command.  This is useful for just
+             forwarding ports.
+
+     -n      Redirects stdin from /dev/null (actually, prevents reading from
+             stdin).  This must be used when ssh is run in the background.  A
+             common trick is to use this to run X11 programs on a remote
+             machine.  For example, ssh -n shadows.cs.hut.fi emacs & will
+             start an emacs on shadows.cs.hut.fi, and the X11 connection will
+             be automatically forwarded over an encrypted channel.  The ssh
+             program will be put in the background.  (This does not work if
+             ssh needs to ask for a password or passphrase; see also the -f
+             option.)
+
+     -O ctl_cmd
+             Control an active connection multiplexing master process.  When
+             the -O option is specified, the ctl_cmd argument is interpreted
+             and passed to the master process.  Valid commands are: M-bM-^@M-^\checkM-bM-^@M-^]
+             (check that the master process is running), M-bM-^@M-^\forwardM-bM-^@M-^] (request
+             forwardings without command execution), M-bM-^@M-^\cancelM-bM-^@M-^] (cancel
+             forwardings), M-bM-^@M-^\exitM-bM-^@M-^] (request the master to exit), and M-bM-^@M-^\stopM-bM-^@M-^]
+             (request the master to stop accepting further multiplexing
+             requests).
+
+     -o option
+             Can be used to give options in the format used in the
+             configuration file.  This is useful for specifying options for
+             which there is no separate command-line flag.  For full details
+             of the options listed below, and their possible values, see
+             ssh_config(5).
+
+                   AddKeysToAgent
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   CanonicalDomains
+                   CanonicalizeFallbackLocal
+                   CanonicalizeHostname
+                   CanonicalizeMaxDots
+                   CanonicalizePermittedCNAMEs
+                   CASignatureAlgorithms
+                   CertificateFile
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Ciphers
+                   ClearAllForwardings
+                   Compression
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   ControlPersist
+                   DynamicForward
+                   EscapeChar
+                   ExitOnForwardFailure
+                   FingerprintHash
+                   ForwardAgent
+                   ForwardX11
+                   ForwardX11Timeout
+                   ForwardX11Trusted
+                   GatewayPorts
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostbasedKeyTypes
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   Hostname
+                   IdentitiesOnly
+                   IdentityAgent
+                   IdentityFile
+                   IPQoS
+                   KbdInteractiveAuthentication
+                   KbdInteractiveDevices
+                   KexAlgorithms
+                   LocalCommand
+                   LocalForward
+                   LogLevel
+                   MACs
+                   Match
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   PermitLocalCommand
+                   PKCS11Provider
+                   Port
+                   PreferredAuthentications
+                   ProxyCommand
+                   ProxyJump
+                   ProxyUseFdpass
+                   PubkeyAcceptedKeyTypes
+                   PubkeyAuthentication
+                   RekeyLimit
+                   RemoteCommand
+                   RemoteForward
+                   RequestTTY
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   SetEnv
+                   StreamLocalBindMask
+                   StreamLocalBindUnlink
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   Tunnel
+                   TunnelDevice
+                   UpdateHostKeys
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+                   VisualHostKey
+                   XAuthLocation
+
+     -p port
+             Port to connect to on the remote host.  This can be specified on
+             a per-host basis in the configuration file.
+
+     -Q query_option
+             Queries ssh for the algorithms supported for the specified
+             version 2.  The available features are: cipher (supported
+             symmetric ciphers), cipher-auth (supported symmetric ciphers that
+             support authenticated encryption), help (supported query terms
+             for use with the -Q flag), mac (supported message integrity
+             codes), kex (key exchange algorithms), key (key types), key-cert
+             (certificate key types), key-plain (non-certificate key types),
+             key-sig (all key types and signature algorithms),
+             protocol-version (supported SSH protocol versions), and sig
+             (supported signature algorithms).  Alternatively, any keyword
+             from ssh_config(5) or sshd_config(5) that takes an algorithm list
+             may be used as an alias for the corresponding query_option.
+
+     -q      Quiet mode.  Causes most warning and diagnostic messages to be
+             suppressed.
+
+     -R [bind_address:]port:host:hostport
+     -R [bind_address:]port:local_socket
+     -R remote_socket:host:hostport
+     -R remote_socket:local_socket
+     -R [bind_address:]port
+             Specifies that connections to the given TCP port or Unix socket
+             on the remote (server) host are to be forwarded to the local
+             side.
+
+             This works by allocating a socket to listen to either a TCP port
+             or to a Unix socket on the remote side.  Whenever a connection is
+             made to this port or Unix socket, the connection is forwarded
+             over the secure channel, and a connection is made from the local
+             machine to either an explicit destination specified by host port
+             hostport, or local_socket, or, if no explicit destination was
+             specified, ssh will act as a SOCKS 4/5 proxy and forward
+             connections to the destinations requested by the remote SOCKS
+             client.
+
+             Port forwardings can also be specified in the configuration file.
+             Privileged ports can be forwarded only when logging in as root on
+             the remote machine.  IPv6 addresses can be specified by enclosing
+             the address in square brackets.
+
+             By default, TCP listening sockets on the server will be bound to
+             the loopback interface only.  This may be overridden by
+             specifying a bind_address.  An empty bind_address, or the address
+             M-bM-^@M-^X*M-bM-^@M-^Y, indicates that the remote socket should listen on all
+             interfaces.  Specifying a remote bind_address will only succeed
+             if the server's GatewayPorts option is enabled (see
+             sshd_config(5)).
+
+             If the port argument is M-bM-^@M-^X0M-bM-^@M-^Y, the listen port will be dynamically
+             allocated on the server and reported to the client at run time.
+             When used together with -O forward the allocated port will be
+             printed to the standard output.
+
+     -S ctl_path
+             Specifies the location of a control socket for connection
+             sharing, or the string M-bM-^@M-^\noneM-bM-^@M-^] to disable connection sharing.
+             Refer to the description of ControlPath and ControlMaster in
+             ssh_config(5) for details.
+
+     -s      May be used to request invocation of a subsystem on the remote
+             system.  Subsystems facilitate the use of SSH as a secure
+             transport for other applications (e.g. sftp(1)).  The subsystem
+             is specified as the remote command.
+
+     -T      Disable pseudo-terminal allocation.
+
+     -t      Force pseudo-terminal allocation.  This can be used to execute
+             arbitrary screen-based programs on a remote machine, which can be
+             very useful, e.g. when implementing menu services.  Multiple -t
+             options force tty allocation, even if ssh has no local tty.
+
+     -V      Display the version number and exit.
+
+     -v      Verbose mode.  Causes ssh to print debugging messages about its
+             progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.  Multiple -v options
+             increase the verbosity.  The maximum is 3.
+
+     -W host:port
+             Requests that standard input and output on the client be
+             forwarded to host on port over the secure channel.  Implies -N,
+             -T, ExitOnForwardFailure and ClearAllForwardings, though these
+             can be overridden in the configuration file or using -o command
+             line options.
+
+     -w local_tun[:remote_tun]
+             Requests tunnel device forwarding with the specified tun(4)
+             devices between the client (local_tun) and the server
+             (remote_tun).
+
+             The devices may be specified by numerical ID or the keyword
+             M-bM-^@M-^\anyM-bM-^@M-^], which uses the next available tunnel device.  If
+             remote_tun is not specified, it defaults to M-bM-^@M-^\anyM-bM-^@M-^].  See also the
+             Tunnel and TunnelDevice directives in ssh_config(5).
+
+             If the Tunnel directive is unset, it will be set to the default
+             tunnel mode, which is M-bM-^@M-^\point-to-pointM-bM-^@M-^].  If a different Tunnel
+             forwarding mode it desired, then it should be specified before
+             -w.
+
+     -X      Enables X11 forwarding.  This can also be specified on a per-host
+             basis in a configuration file.
+
+             X11 forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             user's X authorization database) can access the local X11 display
+             through the forwarded connection.  An attacker may then be able
+             to perform activities such as keystroke monitoring.
+
+             For this reason, X11 forwarding is subjected to X11 SECURITY
+             extension restrictions by default.  Please refer to the ssh -Y
+             option and the ForwardX11Trusted directive in ssh_config(5) for
+             more information.
+
+     -x      Disables X11 forwarding.
+
+     -Y      Enables trusted X11 forwarding.  Trusted X11 forwardings are not
+             subjected to the X11 SECURITY extension controls.
+
+     -y      Send log information using the syslog(3) system module.  By
+             default this information is sent to stderr.
+
+     ssh may additionally obtain configuration data from a per-user
+     configuration file and a system-wide configuration file.  The file format
+     and configuration options are described in ssh_config(5).
+
+AUTHENTICATION
+     The OpenSSH SSH client supports SSH protocol 2.
+
+     The methods available for authentication are: GSSAPI-based
+     authentication, host-based authentication, public key authentication,
+     challenge-response authentication, and password authentication.
+     Authentication methods are tried in the order specified above, though
+     PreferredAuthentications can be used to change the default order.
+
+     Host-based authentication works as follows: If the machine the user logs
+     in from is listed in /etc/hosts.equiv or /etc/shosts.equiv on the remote
+     machine, the user is non-root and the user names are the same on both
+     sides, or if the files ~/.rhosts or ~/.shosts exist in the user's home
+     directory on the remote machine and contain a line containing the name of
+     the client machine and the name of the user on that machine, the user is
+     considered for login.  Additionally, the server must be able to verify
+     the client's host key (see the description of /etc/ssh/ssh_known_hosts
+     and ~/.ssh/known_hosts, below) for login to be permitted.  This
+     authentication method closes security holes due to IP spoofing, DNS
+     spoofing, and routing spoofing.  [Note to the administrator:
+     /etc/hosts.equiv, ~/.rhosts, and the rlogin/rsh protocol in general, are
+     inherently insecure and should be disabled if security is desired.]
+
+     Public key authentication works as follows: The scheme is based on
+     public-key cryptography, using cryptosystems where encryption and
+     decryption are done using separate keys, and it is unfeasible to derive
+     the decryption key from the encryption key.  The idea is that each user
+     creates a public/private key pair for authentication purposes.  The
+     server knows the public key, and only the user knows the private key.
+     ssh implements public key authentication protocol automatically, using
+     one of the DSA, ECDSA, Ed25519 or RSA algorithms.  The HISTORY section of
+     ssl(8) contains a brief discussion of the DSA and RSA algorithms.
+
+     The file ~/.ssh/authorized_keys lists the public keys that are permitted
+     for logging in.  When the user logs in, the ssh program tells the server
+     which key pair it would like to use for authentication.  The client
+     proves that it has access to the private key and the server checks that
+     the corresponding public key is authorized to accept the account.
+
+     The server may inform the client of errors that prevented public key
+     authentication from succeeding after authentication completes using a
+     different method.  These may be viewed by increasing the LogLevel to
+     DEBUG or higher (e.g. by using the -v flag).
+
+     The user creates his/her key pair by running ssh-keygen(1).  This stores
+     the private key in ~/.ssh/id_dsa (DSA), ~/.ssh/id_ecdsa (ECDSA),
+     ~/.ssh/id_ecdsa_sk (authenticator-hosted ECDSA), ~/.ssh/id_ed25519
+     (Ed25519), ~/.ssh/id_ed25519_sk (authenticator-hosted Ed25519), or
+     ~/.ssh/id_rsa (RSA) and stores the public key in ~/.ssh/id_dsa.pub (DSA),
+     ~/.ssh/id_ecdsa.pub (ECDSA), ~/.ssh/id_ecdsa_sk.pub (authenticator-hosted
+     ECDSA), ~/.ssh/id_ed25519.pub (Ed25519), ~/.ssh/id_ed25519_sk.pub
+     (authenticator-hosted Ed25519), or ~/.ssh/id_rsa.pub (RSA) in the user's
+     home directory.  The user should then copy the public key to
+     ~/.ssh/authorized_keys in his/her home directory on the remote machine.
+     The authorized_keys file corresponds to the conventional ~/.rhosts file,
+     and has one key per line, though the lines can be very long.  After this,
+     the user can log in without giving the password.
+
+     A variation on public key authentication is available in the form of
+     certificate authentication: instead of a set of public/private keys,
+     signed certificates are used.  This has the advantage that a single
+     trusted certification authority can be used in place of many
+     public/private keys.  See the CERTIFICATES section of ssh-keygen(1) for
+     more information.
+
+     The most convenient way to use public key or certificate authentication
+     may be with an authentication agent.  See ssh-agent(1) and (optionally)
+     the AddKeysToAgent directive in ssh_config(5) for more information.
+
+     Challenge-response authentication works as follows: The server sends an
+     arbitrary "challenge" text, and prompts for a response.  Examples of
+     challenge-response authentication include BSD Authentication (see
+     login.conf(5)) and PAM (some non-OpenBSD systems).
+
+     Finally, if other authentication methods fail, ssh prompts the user for a
+     password.  The password is sent to the remote host for checking; however,
+     since all communications are encrypted, the password cannot be seen by
+     someone listening on the network.
+
+     ssh automatically maintains and checks a database containing
+     identification for all hosts it has ever been used with.  Host keys are
+     stored in ~/.ssh/known_hosts in the user's home directory.  Additionally,
+     the file /etc/ssh/ssh_known_hosts is automatically checked for known
+     hosts.  Any new hosts are automatically added to the user's file.  If a
+     host's identification ever changes, ssh warns about this and disables
+     password authentication to prevent server spoofing or man-in-the-middle
+     attacks, which could otherwise be used to circumvent the encryption.  The
+     StrictHostKeyChecking option can be used to control logins to machines
+     whose host key is not known or has changed.
+
+     When the user's identity has been accepted by the server, the server
+     either executes the given command in a non-interactive session or, if no
+     command has been specified, logs into the machine and gives the user a
+     normal shell as an interactive session.  All communication with the
+     remote command or shell will be automatically encrypted.
+
+     If an interactive session is requested ssh by default will only request a
+     pseudo-terminal (pty) for interactive sessions when the client has one.
+     The flags -T and -t can be used to override this behaviour.
+
+     If a pseudo-terminal has been allocated the user may use the escape
+     characters noted below.
+
+     If no pseudo-terminal has been allocated, the session is transparent and
+     can be used to reliably transfer binary data.  On most systems, setting
+     the escape character to M-bM-^@M-^\noneM-bM-^@M-^] will also make the session transparent
+     even if a tty is used.
+
+     The session terminates when the command or shell on the remote machine
+     exits and all X11 and TCP connections have been closed.
+
+ESCAPE CHARACTERS
+     When a pseudo-terminal has been requested, ssh supports a number of
+     functions through the use of an escape character.
+
+     A single tilde character can be sent as ~~ or by following the tilde by a
+     character other than those described below.  The escape character must
+     always follow a newline to be interpreted as special.  The escape
+     character can be changed in configuration files using the EscapeChar
+     configuration directive or on the command line by the -e option.
+
+     The supported escapes (assuming the default M-bM-^@M-^X~M-bM-^@M-^Y) are:
+
+     ~.      Disconnect.
+
+     ~^Z     Background ssh.
+
+     ~#      List forwarded connections.
+
+     ~&      Background ssh at logout when waiting for forwarded connection /
+             X11 sessions to terminate.
+
+     ~?      Display a list of escape characters.
+
+     ~B      Send a BREAK to the remote system (only useful if the peer
+             supports it).
+
+     ~C      Open command line.  Currently this allows the addition of port
+             forwardings using the -L, -R and -D options (see above).  It also
+             allows the cancellation of existing port-forwardings with
+             -KL[bind_address:]port for local, -KR[bind_address:]port for
+             remote and -KD[bind_address:]port for dynamic port-forwardings.
+             !command allows the user to execute a local command if the
+             PermitLocalCommand option is enabled in ssh_config(5).  Basic
+             help is available, using the -h option.
+
+     ~R      Request rekeying of the connection (only useful if the peer
+             supports it).
+
+     ~V      Decrease the verbosity (LogLevel) when errors are being written
+             to stderr.
+
+     ~v      Increase the verbosity (LogLevel) when errors are being written
+             to stderr.
+
+TCP FORWARDING
+     Forwarding of arbitrary TCP connections over a secure channel can be
+     specified either on the command line or in a configuration file.  One
+     possible application of TCP forwarding is a secure connection to a mail
+     server; another is going through firewalls.
+
+     In the example below, we look at encrypting communication for an IRC
+     client, even though the IRC server it connects to does not directly
+     support encrypted communication.  This works as follows: the user
+     connects to the remote host using ssh, specifying the ports to be used to
+     forward the connection.  After that it is possible to start the program
+     locally, and ssh will encrypt and forward the connection to the remote
+     server.
+
+     The following example tunnels an IRC session from the client to an IRC
+     server at M-bM-^@M-^\server.example.comM-bM-^@M-^], joining channel M-bM-^@M-^\#usersM-bM-^@M-^], nickname
+     M-bM-^@M-^\pinkyM-bM-^@M-^], using the standard IRC port, 6667:
+
+         $ ssh -f -L 6667:localhost:6667 server.example.com sleep 10
+         $ irc -c '#users' pinky IRC/127.0.0.1
+
+     The -f option backgrounds ssh and the remote command M-bM-^@M-^\sleep 10M-bM-^@M-^] is
+     specified to allow an amount of time (10 seconds, in the example) to
+     start the program which is going to use the tunnel.  If no connections
+     are made within the time specified, ssh will exit.
+
+X11 FORWARDING
+     If the ForwardX11 variable is set to M-bM-^@M-^\yesM-bM-^@M-^] (or see the description of the
+     -X, -x, and -Y options above) and the user is using X11 (the DISPLAY
+     environment variable is set), the connection to the X11 display is
+     automatically forwarded to the remote side in such a way that any X11
+     programs started from the shell (or command) will go through the
+     encrypted channel, and the connection to the real X server will be made
+     from the local machine.  The user should not manually set DISPLAY.
+     Forwarding of X11 connections can be configured on the command line or in
+     configuration files.
+
+     The DISPLAY value set by ssh will point to the server machine, but with a
+     display number greater than zero.  This is normal, and happens because
+     ssh creates a M-bM-^@M-^\proxyM-bM-^@M-^] X server on the server machine for forwarding the
+     connections over the encrypted channel.
+
+     ssh will also automatically set up Xauthority data on the server machine.
+     For this purpose, it will generate a random authorization cookie, store
+     it in Xauthority on the server, and verify that any forwarded connections
+     carry this cookie and replace it by the real cookie when the connection
+     is opened.  The real authentication cookie is never sent to the server
+     machine (and no cookies are sent in the plain).
+
+     If the ForwardAgent variable is set to M-bM-^@M-^\yesM-bM-^@M-^] (or see the description of
+     the -A and -a options above) and the user is using an authentication
+     agent, the connection to the agent is automatically forwarded to the
+     remote side.
+
+VERIFYING HOST KEYS
+     When connecting to a server for the first time, a fingerprint of the
+     server's public key is presented to the user (unless the option
+     StrictHostKeyChecking has been disabled).  Fingerprints can be determined
+     using ssh-keygen(1):
+
+           $ ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key
+
+     If the fingerprint is already known, it can be matched and the key can be
+     accepted or rejected.  If only legacy (MD5) fingerprints for the server
+     are available, the ssh-keygen(1) -E option may be used to downgrade the
+     fingerprint algorithm to match.
+
+     Because of the difficulty of comparing host keys just by looking at
+     fingerprint strings, there is also support to compare host keys visually,
+     using random art.  By setting the VisualHostKey option to M-bM-^@M-^\yesM-bM-^@M-^], a small
+     ASCII graphic gets displayed on every login to a server, no matter if the
+     session itself is interactive or not.  By learning the pattern a known
+     server produces, a user can easily find out that the host key has changed
+     when a completely different pattern is displayed.  Because these patterns
+     are not unambiguous however, a pattern that looks similar to the pattern
+     remembered only gives a good probability that the host key is the same,
+     not guaranteed proof.
+
+     To get a listing of the fingerprints along with their random art for all
+     known hosts, the following command line can be used:
+
+           $ ssh-keygen -lv -f ~/.ssh/known_hosts
+
+     If the fingerprint is unknown, an alternative method of verification is
+     available: SSH fingerprints verified by DNS.  An additional resource
+     record (RR), SSHFP, is added to a zonefile and the connecting client is
+     able to match the fingerprint with that of the key presented.
+
+     In this example, we are connecting a client to a server,
+     M-bM-^@M-^\host.example.comM-bM-^@M-^].  The SSHFP resource records should first be added to
+     the zonefile for host.example.com:
+
+           $ ssh-keygen -r host.example.com.
+
+     The output lines will have to be added to the zonefile.  To check that
+     the zone is answering fingerprint queries:
+
+           $ dig -t SSHFP host.example.com
+
+     Finally the client connects:
+
+           $ ssh -o "VerifyHostKeyDNS ask" host.example.com
+           [...]
+           Matching host key fingerprint found in DNS.
+           Are you sure you want to continue connecting (yes/no)?
+
+     See the VerifyHostKeyDNS option in ssh_config(5) for more information.
+
+SSH-BASED VIRTUAL PRIVATE NETWORKS
+     ssh contains support for Virtual Private Network (VPN) tunnelling using
+     the tun(4) network pseudo-device, allowing two networks to be joined
+     securely.  The sshd_config(5) configuration option PermitTunnel controls
+     whether the server supports this, and at what level (layer 2 or 3
+     traffic).
+
+     The following example would connect client network 10.0.50.0/24 with
+     remote network 10.0.99.0/24 using a point-to-point connection from
+     10.1.1.1 to 10.1.1.2, provided that the SSH server running on the gateway
+     to the remote network, at 192.168.1.15, allows it.
+
+     On the client:
+
+           # ssh -f -w 0:1 192.168.1.15 true
+           # ifconfig tun0 10.1.1.1 10.1.1.2 netmask 255.255.255.252
+           # route add 10.0.99.0/24 10.1.1.2
+
+     On the server:
+
+           # ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.252
+           # route add 10.0.50.0/24 10.1.1.1
+
+     Client access may be more finely tuned via the /root/.ssh/authorized_keys
+     file (see below) and the PermitRootLogin server option.  The following
+     entry would permit connections on tun(4) device 1 from user M-bM-^@M-^\janeM-bM-^@M-^] and on
+     tun device 2 from user M-bM-^@M-^\johnM-bM-^@M-^], if PermitRootLogin is set to
+     M-bM-^@M-^\forced-commands-onlyM-bM-^@M-^]:
+
+       tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... jane
+       tunnel="2",command="sh /etc/netstart tun2" ssh-rsa ... john
+
+     Since an SSH-based setup entails a fair amount of overhead, it may be
+     more suited to temporary setups, such as for wireless VPNs.  More
+     permanent VPNs are better provided by tools such as ipsecctl(8) and
+     isakmpd(8).
+
+ENVIRONMENT
+     ssh will normally set the following environment variables:
+
+     DISPLAY               The DISPLAY variable indicates the location of the
+                           X11 server.  It is automatically set by ssh to
+                           point to a value of the form M-bM-^@M-^\hostname:nM-bM-^@M-^], where
+                           M-bM-^@M-^\hostnameM-bM-^@M-^] indicates the host where the shell runs,
+                           and M-bM-^@M-^XnM-bM-^@M-^Y is an integer M-bM-^IM-% 1.  ssh uses this special
+                           value to forward X11 connections over the secure
+                           channel.  The user should normally not set DISPLAY
+                           explicitly, as that will render the X11 connection
+                           insecure (and will require the user to manually
+                           copy any required authorization cookies).
+
+     HOME                  Set to the path of the user's home directory.
+
+     LOGNAME               Synonym for USER; set for compatibility with
+                           systems that use this variable.
+
+     MAIL                  Set to the path of the user's mailbox.
+
+     PATH                  Set to the default PATH, as specified when
+                           compiling ssh.
+
+     SSH_ASKPASS           If ssh needs a passphrase, it will read the
+                           passphrase from the current terminal if it was run
+                           from a terminal.  If ssh does not have a terminal
+                           associated with it but DISPLAY and SSH_ASKPASS are
+                           set, it will execute the program specified by
+                           SSH_ASKPASS and open an X11 window to read the
+                           passphrase.  This is particularly useful when
+                           calling ssh from a .xsession or related script.
+                           (Note that on some machines it may be necessary to
+                           redirect the input from /dev/null to make this
+                           work.)
+
+     SSH_ASKPASS_REQUIRE   Allows further control over the use of an askpass
+                           program.  If this variable is set to M-bM-^@M-^\neverM-bM-^@M-^] then
+                           ssh will never attempt to use one.  If it is set to
+                           M-bM-^@M-^\preferM-bM-^@M-^], then ssh will prefer to use the askpass
+                           program instead of the TTY when requesting
+                           passwords.  Finally, if the variable is set to
+                           M-bM-^@M-^\forceM-bM-^@M-^], then the askpass program will be used for
+                           all passphrase input regardless of whether DISPLAY
+                           is set.
+
+     SSH_AUTH_SOCK         Identifies the path of a UNIX-domain socket used to
+                           communicate with the agent.
+
+     SSH_CONNECTION        Identifies the client and server ends of the
+                           connection.  The variable contains four space-
+                           separated values: client IP address, client port
+                           number, server IP address, and server port number.
+
+     SSH_ORIGINAL_COMMAND  This variable contains the original command line if
+                           a forced command is executed.  It can be used to
+                           extract the original arguments.
+
+     SSH_TTY               This is set to the name of the tty (path to the
+                           device) associated with the current shell or
+                           command.  If the current session has no tty, this
+                           variable is not set.
+
+     SSH_TUNNEL            Optionally set by sshd(8) to contain the interface
+                           names assigned if tunnel forwarding was requested
+                           by the client.
+
+     SSH_USER_AUTH         Optionally set by sshd(8), this variable may
+                           contain a pathname to a file that lists the
+                           authentication methods successfully used when the
+                           session was established, including any public keys
+                           that were used.
+
+     TZ                    This variable is set to indicate the present time
+                           zone if it was set when the daemon was started
+                           (i.e. the daemon passes the value on to new
+                           connections).
+
+     USER                  Set to the name of the user logging in.
+
+     Additionally, ssh reads ~/.ssh/environment, and adds lines of the format
+     M-bM-^@M-^\VARNAME=valueM-bM-^@M-^] to the environment if the file exists and users are
+     allowed to change their environment.  For more information, see the
+     PermitUserEnvironment option in sshd_config(5).
+
+FILES
+     ~/.rhosts
+             This file is used for host-based authentication (see above).  On
+             some machines this file may need to be world-readable if the
+             user's home directory is on an NFS partition, because sshd(8)
+             reads it as root.  Additionally, this file must be owned by the
+             user, and must not have write permissions for anyone else.  The
+             recommended permission for most machines is read/write for the
+             user, and not accessible by others.
+
+     ~/.shosts
+             This file is used in exactly the same way as .rhosts, but allows
+             host-based authentication without permitting login with
+             rlogin/rsh.
+
+     ~/.ssh/
+             This directory is the default location for all user-specific
+             configuration and authentication information.  There is no
+             general requirement to keep the entire contents of this directory
+             secret, but the recommended permissions are read/write/execute
+             for the user, and not accessible by others.
+
+     ~/.ssh/authorized_keys
+             Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used
+             for logging in as this user.  The format of this file is
+             described in the sshd(8) manual page.  This file is not highly
+             sensitive, but the recommended permissions are read/write for the
+             user, and not accessible by others.
+
+     ~/.ssh/config
+             This is the per-user configuration file.  The file format and
+             configuration options are described in ssh_config(5).  Because of
+             the potential for abuse, this file must have strict permissions:
+             read/write for the user, and not writable by others.
+
+     ~/.ssh/environment
+             Contains additional definitions for environment variables; see
+             ENVIRONMENT, above.
+
+     ~/.ssh/id_dsa
+     ~/.ssh/id_ecdsa
+     ~/.ssh/id_ecdsa_sk
+     ~/.ssh/id_ed25519
+     ~/.ssh/id_ed25519_sk
+     ~/.ssh/id_rsa
+             Contains the private key for authentication.  These files contain
+             sensitive data and should be readable by the user but not
+             accessible by others (read/write/execute).  ssh will simply
+             ignore a private key file if it is accessible by others.  It is
+             possible to specify a passphrase when generating the key which
+             will be used to encrypt the sensitive part of this file using
+             AES-128.
+
+     ~/.ssh/id_dsa.pub
+     ~/.ssh/id_ecdsa.pub
+     ~/.ssh/id_ecdsa_sk.pub
+     ~/.ssh/id_ed25519.pub
+     ~/.ssh/id_ed25519_sk.pub
+     ~/.ssh/id_rsa.pub
+             Contains the public key for authentication.  These files are not
+             sensitive and can (but need not) be readable by anyone.
+
+     ~/.ssh/known_hosts
+             Contains a list of host keys for all hosts the user has logged
+             into that are not already in the systemwide list of known host
+             keys.  See sshd(8) for further details of the format of this
+             file.
+
+     ~/.ssh/rc
+             Commands in this file are executed by ssh when the user logs in,
+             just before the user's shell (or command) is started.  See the
+             sshd(8) manual page for more information.
+
+     /etc/hosts.equiv
+             This file is for host-based authentication (see above).  It
+             should only be writable by root.
+
+     /etc/shosts.equiv
+             This file is used in exactly the same way as hosts.equiv, but
+             allows host-based authentication without permitting login with
+             rlogin/rsh.
+
+     /etc/ssh/ssh_config
+             Systemwide configuration file.  The file format and configuration
+             options are described in ssh_config(5).
+
+     /etc/ssh/ssh_host_key
+     /etc/ssh/ssh_host_dsa_key
+     /etc/ssh/ssh_host_ecdsa_key
+     /etc/ssh/ssh_host_ed25519_key
+     /etc/ssh/ssh_host_rsa_key
+             These files contain the private parts of the host keys and are
+             used for host-based authentication.
+
+     /etc/ssh/ssh_known_hosts
+             Systemwide list of known host keys.  This file should be prepared
+             by the system administrator to contain the public host keys of
+             all machines in the organization.  It should be world-readable.
+             See sshd(8) for further details of the format of this file.
+
+     /etc/ssh/sshrc
+             Commands in this file are executed by ssh when the user logs in,
+             just before the user's shell (or command) is started.  See the
+             sshd(8) manual page for more information.
+
+EXIT STATUS
+     ssh exits with the exit status of the remote command or with 255 if an
+     error occurred.
+
+SEE ALSO
+     scp(1), sftp(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh-keyscan(1),
+     tun(4), ssh_config(5), ssh-keysign(8), sshd(8)
+
+STANDARDS
+     S. Lehtinen and C. Lonvick, The Secure Shell (SSH) Protocol Assigned
+     Numbers, RFC 4250, January 2006.
+
+     T. Ylonen and C. Lonvick, The Secure Shell (SSH) Protocol Architecture,
+     RFC 4251, January 2006.
+
+     T. Ylonen and C. Lonvick, The Secure Shell (SSH) Authentication Protocol,
+     RFC 4252, January 2006.
+
+     T. Ylonen and C. Lonvick, The Secure Shell (SSH) Transport Layer
+     Protocol, RFC 4253, January 2006.
+
+     T. Ylonen and C. Lonvick, The Secure Shell (SSH) Connection Protocol, RFC
+     4254, January 2006.
+
+     J. Schlyter and W. Griffin, Using DNS to Securely Publish Secure Shell
+     (SSH) Key Fingerprints, RFC 4255, January 2006.
+
+     F. Cusack and M. Forssen, Generic Message Exchange Authentication for the
+     Secure Shell Protocol (SSH), RFC 4256, January 2006.
+
+     J. Galbraith and P. Remaker, The Secure Shell (SSH) Session Channel Break
+     Extension, RFC 4335, January 2006.
+
+     M. Bellare, T. Kohno, and C. Namprempre, The Secure Shell (SSH) Transport
+     Layer Encryption Modes, RFC 4344, January 2006.
+
+     B. Harris, Improved Arcfour Modes for the Secure Shell (SSH) Transport
+     Layer Protocol, RFC 4345, January 2006.
+
+     M. Friedl, N. Provos, and W. Simpson, Diffie-Hellman Group Exchange for
+     the Secure Shell (SSH) Transport Layer Protocol, RFC 4419, March 2006.
+
+     J. Galbraith and R. Thayer, The Secure Shell (SSH) Public Key File
+     Format, RFC 4716, November 2006.
+
+     D. Stebila and J. Green, Elliptic Curve Algorithm Integration in the
+     Secure Shell Transport Layer, RFC 5656, December 2009.
+
+     A. Perrig and D. Song, Hash Visualization: a New Technique to improve
+     Real-World Security, 1999, International Workshop on Cryptographic
+     Techniques and E-Commerce (CrypTEC '99).
+
+AUTHORS
+     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
+     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
+     de Raadt and Dug Song removed many bugs, re-added newer features and
+     created OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     versions 1.5 and 2.0.
+
+OpenBSD 6.8                      July 15, 2020                     OpenBSD 6.8