Adding upstream version 1:8.4p1.upstream/1%8.4p1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1194 insertions, 0 deletions

diff --git a/ssh_config.0 b/ssh_config.0
new file mode 100644
index 0000000..ae98748
--- /dev/null
+++ b/ssh_config.0
@@ -0,0 +1,1194 @@
+SSH_CONFIG(5)                 File Formats Manual                SSH_CONFIG(5)
+
+NAME
+     ssh_config M-bM-^@M-^S OpenSSH client configuration file
+
+DESCRIPTION
+     ssh(1) obtains configuration data from the following sources in the
+     following order:
+
+           1.   command-line options
+           2.   user's configuration file (~/.ssh/config)
+           3.   system-wide configuration file (/etc/ssh/ssh_config)
+
+     For each parameter, the first obtained value will be used.  The
+     configuration files contain sections separated by Host specifications,
+     and that section is only applied for hosts that match one of the patterns
+     given in the specification.  The matched host name is usually the one
+     given on the command line (see the CanonicalizeHostname option for
+     exceptions).
+
+     Since the first obtained value for each parameter is used, more host-
+     specific declarations should be given near the beginning of the file, and
+     general defaults at the end.
+
+     The file contains keyword-argument pairs, one per line.  Lines starting
+     with M-bM-^@M-^X#M-bM-^@M-^Y and empty lines are interpreted as comments.  Arguments may
+     optionally be enclosed in double quotes (") in order to represent
+     arguments containing spaces.  Configuration options may be separated by
+     whitespace or optional whitespace and exactly one M-bM-^@M-^X=M-bM-^@M-^Y; the latter format
+     is useful to avoid the need to quote whitespace when specifying
+     configuration options using the ssh, scp, and sftp -o option.
+
+     The possible keywords and their meanings are as follows (note that
+     keywords are case-insensitive and arguments are case-sensitive):
+
+     Host    Restricts the following declarations (up to the next Host or
+             Match keyword) to be only for those hosts that match one of the
+             patterns given after the keyword.  If more than one pattern is
+             provided, they should be separated by whitespace.  A single M-bM-^@M-^X*M-bM-^@M-^Y
+             as a pattern can be used to provide global defaults for all
+             hosts.  The host is usually the hostname argument given on the
+             command line (see the CanonicalizeHostname keyword for
+             exceptions).
+
+             A pattern entry may be negated by prefixing it with an
+             exclamation mark (M-bM-^@M-^X!M-bM-^@M-^Y).  If a negated entry is matched, then the
+             Host entry is ignored, regardless of whether any other patterns
+             on the line match.  Negated matches are therefore useful to
+             provide exceptions for wildcard matches.
+
+             See PATTERNS for more information on patterns.
+
+     Match   Restricts the following declarations (up to the next Host or
+             Match keyword) to be used only when the conditions following the
+             Match keyword are satisfied.  Match conditions are specified
+             using one or more criteria or the single token all which always
+             matches.  The available criteria keywords are: canonical, final,
+             exec, host, originalhost, user, and localuser.  The all criteria
+             must appear alone or immediately after canonical or final.  Other
+             criteria may be combined arbitrarily.  All criteria but all,
+             canonical, and final require an argument.  Criteria may be
+             negated by prepending an exclamation mark (M-bM-^@M-^X!M-bM-^@M-^Y).
+
+             The canonical keyword matches only when the configuration file is
+             being re-parsed after hostname canonicalization (see the
+             CanonicalizeHostname option).  This may be useful to specify
+             conditions that work with canonical host names only.
+
+             The final keyword requests that the configuration be re-parsed
+             (regardless of whether CanonicalizeHostname is enabled), and
+             matches only during this final pass.  If CanonicalizeHostname is
+             enabled, then canonical and final match during the same pass.
+
+             The exec keyword executes the specified command under the user's
+             shell.  If the command returns a zero exit status then the
+             condition is considered true.  Commands containing whitespace
+             characters must be quoted.  Arguments to exec accept the tokens
+             described in the TOKENS section.
+
+             The other keywords' criteria must be single entries or comma-
+             separated lists and may use the wildcard and negation operators
+             described in the PATTERNS section.  The criteria for the host
+             keyword are matched against the target hostname, after any
+             substitution by the Hostname or CanonicalizeHostname options.
+             The originalhost keyword matches against the hostname as it was
+             specified on the command-line.  The user keyword matches against
+             the target username on the remote host.  The localuser keyword
+             matches against the name of the local user running ssh(1) (this
+             keyword may be useful in system-wide ssh_config files).
+
+     AddKeysToAgent
+             Specifies whether keys should be automatically added to a running
+             ssh-agent(1).  If this option is set to yes and a key is loaded
+             from a file, the key and its passphrase are added to the agent
+             with the default lifetime, as if by ssh-add(1).  If this option
+             is set to ask, ssh(1) will require confirmation using the
+             SSH_ASKPASS program before adding a key (see ssh-add(1) for
+             details).  If this option is set to confirm, each use of the key
+             must be confirmed, as if the -c option was specified to
+             ssh-add(1).  If this option is set to no, no keys are added to
+             the agent.  Alternately, this option may be specified as a time
+             interval using the format described in the TIME FORMATS section
+             of sshd_config(5) to specify the key's lifetime in ssh-agent(1),
+             after which it will automatically be removed.  The argument must
+             be no (the default), yes, confirm (optionally followed by a time
+             interval), ask or a time interval.
+
+     AddressFamily
+             Specifies which address family to use when connecting.  Valid
+             arguments are any (the default), inet (use IPv4 only), or inet6
+             (use IPv6 only).
+
+     BatchMode
+             If set to yes, user interaction such as password prompts and host
+             key confirmation requests will be disabled.  This option is
+             useful in scripts and other batch jobs where no user is present
+             to interact with ssh(1).  The argument must be yes or no (the
+             default).
+
+     BindAddress
+             Use the specified address on the local machine as the source
+             address of the connection.  Only useful on systems with more than
+             one address.
+
+     BindInterface
+             Use the address of the specified interface on the local machine
+             as the source address of the connection.
+
+     CanonicalDomains
+             When CanonicalizeHostname is enabled, this option specifies the
+             list of domain suffixes in which to search for the specified
+             destination host.
+
+     CanonicalizeFallbackLocal
+             Specifies whether to fail with an error when hostname
+             canonicalization fails.  The default, yes, will attempt to look
+             up the unqualified hostname using the system resolver's search
+             rules.  A value of no will cause ssh(1) to fail instantly if
+             CanonicalizeHostname is enabled and the target hostname cannot be
+             found in any of the domains specified by CanonicalDomains.
+
+     CanonicalizeHostname
+             Controls whether explicit hostname canonicalization is performed.
+             The default, no, is not to perform any name rewriting and let the
+             system resolver handle all hostname lookups.  If set to yes then,
+             for connections that do not use a ProxyCommand or ProxyJump,
+             ssh(1) will attempt to canonicalize the hostname specified on the
+             command line using the CanonicalDomains suffixes and
+             CanonicalizePermittedCNAMEs rules.  If CanonicalizeHostname is
+             set to always, then canonicalization is applied to proxied
+             connections too.
+
+             If this option is enabled, then the configuration files are
+             processed again using the new target name to pick up any new
+             configuration in matching Host and Match stanzas.
+
+     CanonicalizeMaxDots
+             Specifies the maximum number of dot characters in a hostname
+             before canonicalization is disabled.  The default, 1, allows a
+             single dot (i.e. hostname.subdomain).
+
+     CanonicalizePermittedCNAMEs
+             Specifies rules to determine whether CNAMEs should be followed
+             when canonicalizing hostnames.  The rules consist of one or more
+             arguments of source_domain_list:target_domain_list, where
+             source_domain_list is a pattern-list of domains that may follow
+             CNAMEs in canonicalization, and target_domain_list is a pattern-
+             list of domains that they may resolve to.
+
+             For example, "*.a.example.com:*.b.example.com,*.c.example.com"
+             will allow hostnames matching "*.a.example.com" to be
+             canonicalized to names in the "*.b.example.com" or
+             "*.c.example.com" domains.
+
+     CASignatureAlgorithms
+             Specifies which algorithms are allowed for signing of
+             certificates by certificate authorities (CAs).  The default is:
+
+                   ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
+                   ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
+
+             ssh(1) will not accept host certificates signed using algorithms
+             other than those specified.
+
+     CertificateFile
+             Specifies a file from which the user's certificate is read.  A
+             corresponding private key must be provided separately in order to
+             use this certificate either from an IdentityFile directive or -i
+             flag to ssh(1), via ssh-agent(1), or via a PKCS11Provider or
+             SecurityKeyProvider.
+
+             Arguments to CertificateFile may use the tilde syntax to refer to
+             a user's home directory, the tokens described in the TOKENS
+             section and environment variables as described in the ENVIRONMENT
+             VARIABLES section.
+
+             It is possible to have multiple certificate files specified in
+             configuration files; these certificates will be tried in
+             sequence.  Multiple CertificateFile directives will add to the
+             list of certificates used for authentication.
+
+     ChallengeResponseAuthentication
+             Specifies whether to use challenge-response authentication.  The
+             argument to this keyword must be yes (the default) or no.
+
+     CheckHostIP
+             If set to yes (the default), ssh(1) will additionally check the
+             host IP address in the known_hosts file.  This allows it to
+             detect if a host key changed due to DNS spoofing and will add
+             addresses of destination hosts to ~/.ssh/known_hosts in the
+             process, regardless of the setting of StrictHostKeyChecking.  If
+             the option is set to no, the check will not be executed.
+
+     Ciphers
+             Specifies the ciphers allowed and their order of preference.
+             Multiple ciphers must be comma-separated.  If the specified list
+             begins with a M-bM-^@M-^X+M-bM-^@M-^Y character, then the specified ciphers will be
+             appended to the default set instead of replacing them.  If the
+             specified list begins with a M-bM-^@M-^X-M-bM-^@M-^Y character, then the specified
+             ciphers (including wildcards) will be removed from the default
+             set instead of replacing them.  If the specified list begins with
+             a M-bM-^@M-^X^M-bM-^@M-^Y character, then the specified ciphers will be placed at the
+             head of the default set.
+
+             The supported ciphers are:
+
+                   3des-cbc
+                   aes128-cbc
+                   aes192-cbc
+                   aes256-cbc
+                   aes128-ctr
+                   aes192-ctr
+                   aes256-ctr
+                   aes128-gcm@openssh.com
+                   aes256-gcm@openssh.com
+                   chacha20-poly1305@openssh.com
+
+             The default is:
+
+                   chacha20-poly1305@openssh.com,
+                   aes128-ctr,aes192-ctr,aes256-ctr,
+                   aes128-gcm@openssh.com,aes256-gcm@openssh.com
+
+             The list of available ciphers may also be obtained using "ssh -Q
+             cipher".
+
+     ClearAllForwardings
+             Specifies that all local, remote, and dynamic port forwardings
+             specified in the configuration files or on the command line be
+             cleared.  This option is primarily useful when used from the
+             ssh(1) command line to clear port forwardings set in
+             configuration files, and is automatically set by scp(1) and
+             sftp(1).  The argument must be yes or no (the default).
+
+     Compression
+             Specifies whether to use compression.  The argument must be yes
+             or no (the default).
+
+     ConnectionAttempts
+             Specifies the number of tries (one per second) to make before
+             exiting.  The argument must be an integer.  This may be useful in
+             scripts if the connection sometimes fails.  The default is 1.
+
+     ConnectTimeout
+             Specifies the timeout (in seconds) used when connecting to the
+             SSH server, instead of using the default system TCP timeout.
+             This timeout is applied both to establishing the connection and
+             to performing the initial SSH protocol handshake and key
+             exchange.
+
+     ControlMaster
+             Enables the sharing of multiple sessions over a single network
+             connection.  When set to yes, ssh(1) will listen for connections
+             on a control socket specified using the ControlPath argument.
+             Additional sessions can connect to this socket using the same
+             ControlPath with ControlMaster set to no (the default).  These
+             sessions will try to reuse the master instance's network
+             connection rather than initiating new ones, but will fall back to
+             connecting normally if the control socket does not exist, or is
+             not listening.
+
+             Setting this to ask will cause ssh(1) to listen for control
+             connections, but require confirmation using ssh-askpass(1).  If
+             the ControlPath cannot be opened, ssh(1) will continue without
+             connecting to a master instance.
+
+             X11 and ssh-agent(1) forwarding is supported over these
+             multiplexed connections, however the display and agent forwarded
+             will be the one belonging to the master connection i.e. it is not
+             possible to forward multiple displays or agents.
+
+             Two additional options allow for opportunistic multiplexing: try
+             to use a master connection but fall back to creating a new one if
+             one does not already exist.  These options are: auto and autoask.
+             The latter requires confirmation like the ask option.
+
+     ControlPath
+             Specify the path to the control socket used for connection
+             sharing as described in the ControlMaster section above or the
+             string none to disable connection sharing.  Arguments to
+             ControlPath may use the tilde syntax to refer to a user's home
+             directory, the tokens described in the TOKENS section and
+             environment variables as described in the ENVIRONMENT VARIABLES
+             section.  It is recommended that any ControlPath used for
+             opportunistic connection sharing include at least %h, %p, and %r
+             (or alternatively %C) and be placed in a directory that is not
+             writable by other users.  This ensures that shared connections
+             are uniquely identified.
+
+     ControlPersist
+             When used in conjunction with ControlMaster, specifies that the
+             master connection should remain open in the background (waiting
+             for future client connections) after the initial client
+             connection has been closed.  If set to no (the default), then the
+             master connection will not be placed into the background, and
+             will close as soon as the initial client connection is closed.
+             If set to yes or 0, then the master connection will remain in the
+             background indefinitely (until killed or closed via a mechanism
+             such as the "ssh -O exit").  If set to a time in seconds, or a
+             time in any of the formats documented in sshd_config(5), then the
+             backgrounded master connection will automatically terminate after
+             it has remained idle (with no client connections) for the
+             specified time.
+
+     DynamicForward
+             Specifies that a TCP port on the local machine be forwarded over
+             the secure channel, and the application protocol is then used to
+             determine where to connect to from the remote machine.
+
+             The argument must be [bind_address:]port.  IPv6 addresses can be
+             specified by enclosing addresses in square brackets.  By default,
+             the local port is bound in accordance with the GatewayPorts
+             setting.  However, an explicit bind_address may be used to bind
+             the connection to a specific address.  The bind_address of
+             localhost indicates that the listening port be bound for local
+             use only, while an empty address or M-bM-^@M-^X*M-bM-^@M-^Y indicates that the port
+             should be available from all interfaces.
+
+             Currently the SOCKS4 and SOCKS5 protocols are supported, and
+             ssh(1) will act as a SOCKS server.  Multiple forwardings may be
+             specified, and additional forwardings can be given on the command
+             line.  Only the superuser can forward privileged ports.
+
+     EnableSSHKeysign
+             Setting this option to yes in the global client configuration
+             file /etc/ssh/ssh_config enables the use of the helper program
+             ssh-keysign(8) during HostbasedAuthentication.  The argument must
+             be yes or no (the default).  This option should be placed in the
+             non-hostspecific section.  See ssh-keysign(8) for more
+             information.
+
+     EscapeChar
+             Sets the escape character (default: M-bM-^@M-^X~M-bM-^@M-^Y).  The escape character
+             can also be set on the command line.  The argument should be a
+             single character, M-bM-^@M-^X^M-bM-^@M-^Y followed by a letter, or none to disable
+             the escape character entirely (making the connection transparent
+             for binary data).
+
+     ExitOnForwardFailure
+             Specifies whether ssh(1) should terminate the connection if it
+             cannot set up all requested dynamic, tunnel, local, and remote
+             port forwardings, (e.g. if either end is unable to bind and
+             listen on a specified port).  Note that ExitOnForwardFailure does
+             not apply to connections made over port forwardings and will not,
+             for example, cause ssh(1) to exit if TCP connections to the
+             ultimate forwarding destination fail.  The argument must be yes
+             or no (the default).
+
+     FingerprintHash
+             Specifies the hash algorithm used when displaying key
+             fingerprints.  Valid options are: md5 and sha256 (the default).
+
+     ForwardAgent
+             Specifies whether the connection to the authentication agent (if
+             any) will be forwarded to the remote machine.  The argument may
+             be yes, no (the default), an explicit path to an agent socket or
+             the name of an environment variable (beginning with M-bM-^@M-^X$M-bM-^@M-^Y) in which
+             to find the path.
+
+             Agent forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             agent's Unix-domain socket) can access the local agent through
+             the forwarded connection.  An attacker cannot obtain key material
+             from the agent, however they can perform operations on the keys
+             that enable them to authenticate using the identities loaded into
+             the agent.
+
+     ForwardX11
+             Specifies whether X11 connections will be automatically
+             redirected over the secure channel and DISPLAY set.  The argument
+             must be yes or no (the default).
+
+             X11 forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             user's X11 authorization database) can access the local X11
+             display through the forwarded connection.  An attacker may then
+             be able to perform activities such as keystroke monitoring if the
+             ForwardX11Trusted option is also enabled.
+
+     ForwardX11Timeout
+             Specify a timeout for untrusted X11 forwarding using the format
+             described in the TIME FORMATS section of sshd_config(5).  X11
+             connections received by ssh(1) after this time will be refused.
+             Setting ForwardX11Timeout to zero will disable the timeout and
+             permit X11 forwarding for the life of the connection.  The
+             default is to disable untrusted X11 forwarding after twenty
+             minutes has elapsed.
+
+     ForwardX11Trusted
+             If this option is set to yes, remote X11 clients will have full
+             access to the original X11 display.
+
+             If this option is set to no (the default), remote X11 clients
+             will be considered untrusted and prevented from stealing or
+             tampering with data belonging to trusted X11 clients.
+             Furthermore, the xauth(1) token used for the session will be set
+             to expire after 20 minutes.  Remote clients will be refused
+             access after this time.
+
+             See the X11 SECURITY extension specification for full details on
+             the restrictions imposed on untrusted clients.
+
+     GatewayPorts
+             Specifies whether remote hosts are allowed to connect to local
+             forwarded ports.  By default, ssh(1) binds local port forwardings
+             to the loopback address.  This prevents other remote hosts from
+             connecting to forwarded ports.  GatewayPorts can be used to
+             specify that ssh should bind local port forwardings to the
+             wildcard address, thus allowing remote hosts to connect to
+             forwarded ports.  The argument must be yes or no (the default).
+
+     GlobalKnownHostsFile
+             Specifies one or more files to use for the global host key
+             database, separated by whitespace.  The default is
+             /etc/ssh/ssh_known_hosts, /etc/ssh/ssh_known_hosts2.
+
+     GSSAPIAuthentication
+             Specifies whether user authentication based on GSSAPI is allowed.
+             The default is no.
+
+     GSSAPIDelegateCredentials
+             Forward (delegate) credentials to the server.  The default is no.
+
+     HashKnownHosts
+             Indicates that ssh(1) should hash host names and addresses when
+             they are added to ~/.ssh/known_hosts.  These hashed names may be
+             used normally by ssh(1) and sshd(8), but they do not visually
+             reveal identifying information if the file's contents are
+             disclosed.  The default is no.  Note that existing names and
+             addresses in known hosts files will not be converted
+             automatically, but may be manually hashed using ssh-keygen(1).
+
+     HostbasedAuthentication
+             Specifies whether to try rhosts based authentication with public
+             key authentication.  The argument must be yes or no (the
+             default).
+
+     HostbasedKeyTypes
+             Specifies the key types that will be used for hostbased
+             authentication as a comma-separated list of patterns.
+             Alternately if the specified list begins with a M-bM-^@M-^X+M-bM-^@M-^Y character,
+             then the specified key types will be appended to the default set
+             instead of replacing them.  If the specified list begins with a
+             M-bM-^@M-^X-M-bM-^@M-^Y character, then the specified key types (including wildcards)
+             will be removed from the default set instead of replacing them.
+             If the specified list begins with a M-bM-^@M-^X^M-bM-^@M-^Y character, then the
+             specified key types will be placed at the head of the default
+             set.  The default for this option is:
+
+                ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ecdsa-sha2-nistp384-cert-v01@openssh.com,
+                ecdsa-sha2-nistp521-cert-v01@openssh.com,
+                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ssh-ed25519-cert-v01@openssh.com,
+                sk-ssh-ed25519-cert-v01@openssh.com,
+                rsa-sha2-512-cert-v01@openssh.com,
+                rsa-sha2-256-cert-v01@openssh.com,
+                ssh-rsa-cert-v01@openssh.com,
+                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
+                sk-ecdsa-sha2-nistp256@openssh.com,
+                ssh-ed25519,sk-ssh-ed25519@openssh.com,
+                rsa-sha2-512,rsa-sha2-256,ssh-rsa
+
+             The -Q option of ssh(1) may be used to list supported key types.
+
+     HostKeyAlgorithms
+             Specifies the host key algorithms that the client wants to use in
+             order of preference.  Alternately if the specified list begins
+             with a M-bM-^@M-^X+M-bM-^@M-^Y character, then the specified key types will be
+             appended to the default set instead of replacing them.  If the
+             specified list begins with a M-bM-^@M-^X-M-bM-^@M-^Y character, then the specified
+             key types (including wildcards) will be removed from the default
+             set instead of replacing them.  If the specified list begins with
+             a M-bM-^@M-^X^M-bM-^@M-^Y character, then the specified key types will be placed at
+             the head of the default set.  The default for this option is:
+
+                ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ecdsa-sha2-nistp384-cert-v01@openssh.com,
+                ecdsa-sha2-nistp521-cert-v01@openssh.com,
+                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ssh-ed25519-cert-v01@openssh.com,
+                sk-ssh-ed25519-cert-v01@openssh.com,
+                rsa-sha2-512-cert-v01@openssh.com,
+                rsa-sha2-256-cert-v01@openssh.com,
+                ssh-rsa-cert-v01@openssh.com,
+                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
+                sk-ecdsa-sha2-nistp256@openssh.com,
+                ssh-ed25519,sk-ssh-ed25519@openssh.com,
+                rsa-sha2-512,rsa-sha2-256,ssh-rsa
+
+             If hostkeys are known for the destination host then this default
+             is modified to prefer their algorithms.
+
+             The list of available key types may also be obtained using "ssh
+             -Q HostKeyAlgorithms".
+
+     HostKeyAlias
+             Specifies an alias that should be used instead of the real host
+             name when looking up or saving the host key in the host key
+             database files and when validating host certificates.  This
+             option is useful for tunneling SSH connections or for multiple
+             servers running on a single host.
+
+     Hostname
+             Specifies the real host name to log into.  This can be used to
+             specify nicknames or abbreviations for hosts.  Arguments to
+             Hostname accept the tokens described in the TOKENS section.
+             Numeric IP addresses are also permitted (both on the command line
+             and in Hostname specifications).  The default is the name given
+             on the command line.
+
+     IdentitiesOnly
+             Specifies that ssh(1) should only use the configured
+             authentication identity and certificate files (either the default
+             files, or those explicitly configured in the ssh_config files or
+             passed on the ssh(1) command-line), even if ssh-agent(1) or a
+             PKCS11Provider or SecurityKeyProvider offers more identities.
+             The argument to this keyword must be yes or no (the default).
+             This option is intended for situations where ssh-agent offers
+             many different identities.
+
+     IdentityAgent
+             Specifies the UNIX-domain socket used to communicate with the
+             authentication agent.
+
+             This option overrides the SSH_AUTH_SOCK environment variable and
+             can be used to select a specific agent.  Setting the socket name
+             to none disables the use of an authentication agent.  If the
+             string "SSH_AUTH_SOCK" is specified, the location of the socket
+             will be read from the SSH_AUTH_SOCK environment variable.
+             Otherwise if the specified value begins with a M-bM-^@M-^X$M-bM-^@M-^Y character,
+             then it will be treated as an environment variable containing the
+             location of the socket.
+
+             Arguments to IdentityAgent may use the tilde syntax to refer to a
+             user's home directory, the tokens described in the TOKENS section
+             and environment variables as described in the ENVIRONMENT
+             VARIABLES section.
+
+     IdentityFile
+             Specifies a file from which the user's DSA, ECDSA, authenticator-
+             hosted ECDSA, Ed25519, authenticator-hosted Ed25519 or RSA
+             authentication identity is read.  The default is ~/.ssh/id_dsa,
+             ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519,
+             ~/.ssh/id_ed25519_sk and ~/.ssh/id_rsa.  Additionally, any
+             identities represented by the authentication agent will be used
+             for authentication unless IdentitiesOnly is set.  If no
+             certificates have been explicitly specified by CertificateFile,
+             ssh(1) will try to load certificate information from the filename
+             obtained by appending -cert.pub to the path of a specified
+             IdentityFile.
+
+             Arguments to IdentityFile may use the tilde syntax to refer to a
+             user's home directory or the tokens described in the TOKENS
+             section.
+
+             It is possible to have multiple identity files specified in
+             configuration files; all these identities will be tried in
+             sequence.  Multiple IdentityFile directives will add to the list
+             of identities tried (this behaviour differs from that of other
+             configuration directives).
+
+             IdentityFile may be used in conjunction with IdentitiesOnly to
+             select which identities in an agent are offered during
+             authentication.  IdentityFile may also be used in conjunction
+             with CertificateFile in order to provide any certificate also
+             needed for authentication with the identity.
+
+     IgnoreUnknown
+             Specifies a pattern-list of unknown options to be ignored if they
+             are encountered in configuration parsing.  This may be used to
+             suppress errors if ssh_config contains options that are
+             unrecognised by ssh(1).  It is recommended that IgnoreUnknown be
+             listed early in the configuration file as it will not be applied
+             to unknown options that appear before it.
+
+     Include
+             Include the specified configuration file(s).  Multiple pathnames
+             may be specified and each pathname may contain glob(7) wildcards
+             and, for user configurations, shell-like M-bM-^@M-^X~M-bM-^@M-^Y references to user
+             home directories.  Wildcards will be expanded and processed in
+             lexical order.  Files without absolute paths are assumed to be in
+             ~/.ssh if included in a user configuration file or /etc/ssh if
+             included from the system configuration file.  Include directive
+             may appear inside a Match or Host block to perform conditional
+             inclusion.
+
+     IPQoS   Specifies the IPv4 type-of-service or DSCP class for connections.
+             Accepted values are af11, af12, af13, af21, af22, af23, af31,
+             af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6,
+             cs7, ef, le, lowdelay, throughput, reliability, a numeric value,
+             or none to use the operating system default.  This option may
+             take one or two arguments, separated by whitespace.  If one
+             argument is specified, it is used as the packet class
+             unconditionally.  If two values are specified, the first is
+             automatically selected for interactive sessions and the second
+             for non-interactive sessions.  The default is af21 (Low-Latency
+             Data) for interactive sessions and cs1 (Lower Effort) for non-
+             interactive sessions.
+
+     KbdInteractiveAuthentication
+             Specifies whether to use keyboard-interactive authentication.
+             The argument to this keyword must be yes (the default) or no.
+
+     KbdInteractiveDevices
+             Specifies the list of methods to use in keyboard-interactive
+             authentication.  Multiple method names must be comma-separated.
+             The default is to use the server specified list.  The methods
+             available vary depending on what the server supports.  For an
+             OpenSSH server, it may be zero or more of: bsdauth and pam.
+
+     KexAlgorithms
+             Specifies the available KEX (Key Exchange) algorithms.  Multiple
+             algorithms must be comma-separated.  If the specified list begins
+             with a M-bM-^@M-^X+M-bM-^@M-^Y character, then the specified methods will be appended
+             to the default set instead of replacing them.  If the specified
+             list begins with a M-bM-^@M-^X-M-bM-^@M-^Y character, then the specified methods
+             (including wildcards) will be removed from the default set
+             instead of replacing them.  If the specified list begins with a
+             M-bM-^@M-^X^M-bM-^@M-^Y character, then the specified methods will be placed at the
+             head of the default set.  The default is:
+
+                   curve25519-sha256,curve25519-sha256@libssh.org,
+                   ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
+                   diffie-hellman-group-exchange-sha256,
+                   diffie-hellman-group16-sha512,
+                   diffie-hellman-group18-sha512,
+                   diffie-hellman-group14-sha256
+
+             The list of available key exchange algorithms may also be
+             obtained using "ssh -Q kex".
+
+     LocalCommand
+             Specifies a command to execute on the local machine after
+             successfully connecting to the server.  The command string
+             extends to the end of the line, and is executed with the user's
+             shell.  Arguments to LocalCommand accept the tokens described in
+             the TOKENS section.
+
+             The command is run synchronously and does not have access to the
+             session of the ssh(1) that spawned it.  It should not be used for
+             interactive commands.
+
+             This directive is ignored unless PermitLocalCommand has been
+             enabled.
+
+     LocalForward
+             Specifies that a TCP port on the local machine be forwarded over
+             the secure channel to the specified host and port from the remote
+             machine.  The first argument specifies the listener and may be
+             [bind_address:]port or a Unix domain socket path.  The second
+             argument is the destination and may be host:hostport or a Unix
+             domain socket path if the remote host supports it.
+
+             IPv6 addresses can be specified by enclosing addresses in square
+             brackets.  Multiple forwardings may be specified, and additional
+             forwardings can be given on the command line.  Only the superuser
+             can forward privileged ports.  By default, the local port is
+             bound in accordance with the GatewayPorts setting.  However, an
+             explicit bind_address may be used to bind the connection to a
+             specific address.  The bind_address of localhost indicates that
+             the listening port be bound for local use only, while an empty
+             address or M-bM-^@M-^X*M-bM-^@M-^Y indicates that the port should be available from
+             all interfaces.  Unix domain socket paths may use the tokens
+             described in the TOKENS section and environment variables as
+             described in the ENVIRONMENT VARIABLES section.
+
+     LogLevel
+             Gives the verbosity level that is used when logging messages from
+             ssh(1).  The possible values are: QUIET, FATAL, ERROR, INFO,
+             VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The default is INFO.
+             DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3 each specify
+             higher levels of verbose output.
+
+     MACs    Specifies the MAC (message authentication code) algorithms in
+             order of preference.  The MAC algorithm is used for data
+             integrity protection.  Multiple algorithms must be comma-
+             separated.  If the specified list begins with a M-bM-^@M-^X+M-bM-^@M-^Y character,
+             then the specified algorithms will be appended to the default set
+             instead of replacing them.  If the specified list begins with a
+             M-bM-^@M-^X-M-bM-^@M-^Y character, then the specified algorithms (including
+             wildcards) will be removed from the default set instead of
+             replacing them.  If the specified list begins with a M-bM-^@M-^X^M-bM-^@M-^Y
+             character, then the specified algorithms will be placed at the
+             head of the default set.
+
+             The algorithms that contain "-etm" calculate the MAC after
+             encryption (encrypt-then-mac).  These are considered safer and
+             their use recommended.
+
+             The default is:
+
+                   umac-64-etm@openssh.com,umac-128-etm@openssh.com,
+                   hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
+                   hmac-sha1-etm@openssh.com,
+                   umac-64@openssh.com,umac-128@openssh.com,
+                   hmac-sha2-256,hmac-sha2-512,hmac-sha1
+
+             The list of available MAC algorithms may also be obtained using
+             "ssh -Q mac".
+
+     NoHostAuthenticationForLocalhost
+             Disable host authentication for localhost (loopback addresses).
+             The argument to this keyword must be yes or no (the default).
+
+     NumberOfPasswordPrompts
+             Specifies the number of password prompts before giving up.  The
+             argument to this keyword must be an integer.  The default is 3.
+
+     PasswordAuthentication
+             Specifies whether to use password authentication.  The argument
+             to this keyword must be yes (the default) or no.
+
+     PermitLocalCommand
+             Allow local command execution via the LocalCommand option or
+             using the !command escape sequence in ssh(1).  The argument must
+             be yes or no (the default).
+
+     PKCS11Provider
+             Specifies which PKCS#11 provider to use or none to indicate that
+             no provider should be used (the default).  The argument to this
+             keyword is a path to the PKCS#11 shared library ssh(1) should use
+             to communicate with a PKCS#11 token providing keys for user
+             authentication.
+
+     Port    Specifies the port number to connect on the remote host.  The
+             default is 22.
+
+     PreferredAuthentications
+             Specifies the order in which the client should try authentication
+             methods.  This allows a client to prefer one method (e.g.
+             keyboard-interactive) over another method (e.g. password).  The
+             default is:
+
+                   gssapi-with-mic,hostbased,publickey,
+                   keyboard-interactive,password
+
+     ProxyCommand
+             Specifies the command to use to connect to the server.  The
+             command string extends to the end of the line, and is executed
+             using the user's shell M-bM-^@M-^XexecM-bM-^@M-^Y directive to avoid a lingering
+             shell process.
+
+             Arguments to ProxyCommand accept the tokens described in the
+             TOKENS section.  The command can be basically anything, and
+             should read from its standard input and write to its standard
+             output.  It should eventually connect an sshd(8) server running
+             on some machine, or execute sshd -i somewhere.  Host key
+             management will be done using the Hostname of the host being
+             connected (defaulting to the name typed by the user).  Setting
+             the command to none disables this option entirely.  Note that
+             CheckHostIP is not available for connects with a proxy command.
+
+             This directive is useful in conjunction with nc(1) and its proxy
+             support.  For example, the following directive would connect via
+             an HTTP proxy at 192.0.2.0:
+
+                ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p
+
+     ProxyJump
+             Specifies one or more jump proxies as either [user@]host[:port]
+             or an ssh URI.  Multiple proxies may be separated by comma
+             characters and will be visited sequentially.  Setting this option
+             will cause ssh(1) to connect to the target host by first making a
+             ssh(1) connection to the specified ProxyJump host and then
+             establishing a TCP forwarding to the ultimate target from there.
+
+             Note that this option will compete with the ProxyCommand option -
+             whichever is specified first will prevent later instances of the
+             other from taking effect.
+
+             Note also that the configuration for the destination host (either
+             supplied via the command-line or the configuration file) is not
+             generally applied to jump hosts.  ~/.ssh/config should be used if
+             specific configuration is required for jump hosts.
+
+     ProxyUseFdpass
+             Specifies that ProxyCommand will pass a connected file descriptor
+             back to ssh(1) instead of continuing to execute and pass data.
+             The default is no.
+
+     PubkeyAcceptedKeyTypes
+             Specifies the key types that will be used for public key
+             authentication as a comma-separated list of patterns.  If the
+             specified list begins with a M-bM-^@M-^X+M-bM-^@M-^Y character, then the key types
+             after it will be appended to the default instead of replacing it.
+             If the specified list begins with a M-bM-^@M-^X-M-bM-^@M-^Y character, then the
+             specified key types (including wildcards) will be removed from
+             the default set instead of replacing them.  If the specified list
+             begins with a M-bM-^@M-^X^M-bM-^@M-^Y character, then the specified key types will be
+             placed at the head of the default set.  The default for this
+             option is:
+
+                ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ecdsa-sha2-nistp384-cert-v01@openssh.com,
+                ecdsa-sha2-nistp521-cert-v01@openssh.com,
+                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
+                ssh-ed25519-cert-v01@openssh.com,
+                sk-ssh-ed25519-cert-v01@openssh.com,
+                rsa-sha2-512-cert-v01@openssh.com,
+                rsa-sha2-256-cert-v01@openssh.com,
+                ssh-rsa-cert-v01@openssh.com,
+                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
+                sk-ecdsa-sha2-nistp256@openssh.com,
+                ssh-ed25519,sk-ssh-ed25519@openssh.com,
+                rsa-sha2-512,rsa-sha2-256,ssh-rsa
+
+             The list of available key types may also be obtained using "ssh
+             -Q PubkeyAcceptedKeyTypes".
+
+     PubkeyAuthentication
+             Specifies whether to try public key authentication.  The argument
+             to this keyword must be yes (the default) or no.
+
+     RekeyLimit
+             Specifies the maximum amount of data that may be transmitted
+             before the session key is renegotiated, optionally followed a
+             maximum amount of time that may pass before the session key is
+             renegotiated.  The first argument is specified in bytes and may
+             have a suffix of M-bM-^@M-^XKM-bM-^@M-^Y, M-bM-^@M-^XMM-bM-^@M-^Y, or M-bM-^@M-^XGM-bM-^@M-^Y to indicate Kilobytes,
+             Megabytes, or Gigabytes, respectively.  The default is between
+             M-bM-^@M-^X1GM-bM-^@M-^Y and M-bM-^@M-^X4GM-bM-^@M-^Y, depending on the cipher.  The optional second
+             value is specified in seconds and may use any of the units
+             documented in the TIME FORMATS section of sshd_config(5).  The
+             default value for RekeyLimit is default none, which means that
+             rekeying is performed after the cipher's default amount of data
+             has been sent or received and no time based rekeying is done.
+
+     RemoteCommand
+             Specifies a command to execute on the remote machine after
+             successfully connecting to the server.  The command string
+             extends to the end of the line, and is executed with the user's
+             shell.  Arguments to RemoteCommand accept the tokens described in
+             the TOKENS section.
+
+     RemoteForward
+             Specifies that a TCP port on the remote machine be forwarded over
+             the secure channel.  The remote port may either be forwarded to a
+             specified host and port from the local machine, or may act as a
+             SOCKS 4/5 proxy that allows a remote client to connect to
+             arbitrary destinations from the local machine.  The first
+             argument is the listening specification and may be
+             [bind_address:]port or, if the remote host supports it, a Unix
+             domain socket path.  If forwarding to a specific destination then
+             the second argument must be host:hostport or a Unix domain socket
+             path, otherwise if no destination argument is specified then the
+             remote forwarding will be established as a SOCKS proxy.
+
+             IPv6 addresses can be specified by enclosing addresses in square
+             brackets.  Multiple forwardings may be specified, and additional
+             forwardings can be given on the command line.  Privileged ports
+             can be forwarded only when logging in as root on the remote
+             machine.  Unix domain socket paths may use the tokens described
+             in the TOKENS section and environment variables as described in
+             the ENVIRONMENT VARIABLES section.
+
+             If the port argument is 0, the listen port will be dynamically
+             allocated on the server and reported to the client at run time.
+
+             If the bind_address is not specified, the default is to only bind
+             to loopback addresses.  If the bind_address is M-bM-^@M-^X*M-bM-^@M-^Y or an empty
+             string, then the forwarding is requested to listen on all
+             interfaces.  Specifying a remote bind_address will only succeed
+             if the server's GatewayPorts option is enabled (see
+             sshd_config(5)).
+
+     RequestTTY
+             Specifies whether to request a pseudo-tty for the session.  The
+             argument may be one of: no (never request a TTY), yes (always
+             request a TTY when standard input is a TTY), force (always
+             request a TTY) or auto (request a TTY when opening a login
+             session).  This option mirrors the -t and -T flags for ssh(1).
+
+     RevokedHostKeys
+             Specifies revoked host public keys.  Keys listed in this file
+             will be refused for host authentication.  Note that if this file
+             does not exist or is not readable, then host authentication will
+             be refused for all hosts.  Keys may be specified as a text file,
+             listing one public key per line, or as an OpenSSH Key Revocation
+             List (KRL) as generated by ssh-keygen(1).  For more information
+             on KRLs, see the KEY REVOCATION LISTS section in ssh-keygen(1).
+
+     SecurityKeyProvider
+             Specifies a path to a library that will be used when loading any
+             FIDO authenticator-hosted keys, overriding the default of using
+             the built-in USB HID support.
+
+             If the specified value begins with a M-bM-^@M-^X$M-bM-^@M-^Y character, then it will
+             be treated as an environment variable containing the path to the
+             library.
+
+     SendEnv
+             Specifies what variables from the local environ(7) should be sent
+             to the server.  The server must also support it, and the server
+             must be configured to accept these environment variables.  Note
+             that the TERM environment variable is always sent whenever a
+             pseudo-terminal is requested as it is required by the protocol.
+             Refer to AcceptEnv in sshd_config(5) for how to configure the
+             server.  Variables are specified by name, which may contain
+             wildcard characters.  Multiple environment variables may be
+             separated by whitespace or spread across multiple SendEnv
+             directives.
+
+             See PATTERNS for more information on patterns.
+
+             It is possible to clear previously set SendEnv variable names by
+             prefixing patterns with -.  The default is not to send any
+             environment variables.
+
+     ServerAliveCountMax
+             Sets the number of server alive messages (see below) which may be
+             sent without ssh(1) receiving any messages back from the server.
+             If this threshold is reached while server alive messages are
+             being sent, ssh will disconnect from the server, terminating the
+             session.  It is important to note that the use of server alive
+             messages is very different from TCPKeepAlive (below).  The server
+             alive messages are sent through the encrypted channel and
+             therefore will not be spoofable.  The TCP keepalive option
+             enabled by TCPKeepAlive is spoofable.  The server alive mechanism
+             is valuable when the client or server depend on knowing when a
+             connection has become unresponsive.
+
+             The default value is 3.  If, for example, ServerAliveInterval
+             (see below) is set to 15 and ServerAliveCountMax is left at the
+             default, if the server becomes unresponsive, ssh will disconnect
+             after approximately 45 seconds.
+
+     ServerAliveInterval
+             Sets a timeout interval in seconds after which if no data has
+             been received from the server, ssh(1) will send a message through
+             the encrypted channel to request a response from the server.  The
+             default is 0, indicating that these messages will not be sent to
+             the server.
+
+     SetEnv  Directly specify one or more environment variables and their
+             contents to be sent to the server.  Similarly to SendEnv, the
+             server must be prepared to accept the environment variable.
+
+     StreamLocalBindMask
+             Sets the octal file creation mode mask (umask) used when creating
+             a Unix-domain socket file for local or remote port forwarding.
+             This option is only used for port forwarding to a Unix-domain
+             socket file.
+
+             The default value is 0177, which creates a Unix-domain socket
+             file that is readable and writable only by the owner.  Note that
+             not all operating systems honor the file mode on Unix-domain
+             socket files.
+
+     StreamLocalBindUnlink
+             Specifies whether to remove an existing Unix-domain socket file
+             for local or remote port forwarding before creating a new one.
+             If the socket file already exists and StreamLocalBindUnlink is
+             not enabled, ssh will be unable to forward the port to the Unix-
+             domain socket file.  This option is only used for port forwarding
+             to a Unix-domain socket file.
+
+             The argument must be yes or no (the default).
+
+     StrictHostKeyChecking
+             If this flag is set to yes, ssh(1) will never automatically add
+             host keys to the ~/.ssh/known_hosts file, and refuses to connect
+             to hosts whose host key has changed.  This provides maximum
+             protection against man-in-the-middle (MITM) attacks, though it
+             can be annoying when the /etc/ssh/ssh_known_hosts file is poorly
+             maintained or when connections to new hosts are frequently made.
+             This option forces the user to manually add all new hosts.
+
+             If this flag is set to M-bM-^@M-^\accept-newM-bM-^@M-^] then ssh will automatically
+             add new host keys to the user known hosts files, but will not
+             permit connections to hosts with changed host keys.  If this flag
+             is set to M-bM-^@M-^\noM-bM-^@M-^] or M-bM-^@M-^\offM-bM-^@M-^], ssh will automatically add new host keys
+             to the user known hosts files and allow connections to hosts with
+             changed hostkeys to proceed, subject to some restrictions.  If
+             this flag is set to ask (the default), new host keys will be
+             added to the user known host files only after the user has
+             confirmed that is what they really want to do, and ssh will
+             refuse to connect to hosts whose host key has changed.  The host
+             keys of known hosts will be verified automatically in all cases.
+
+     SyslogFacility
+             Gives the facility code that is used when logging messages from
+             ssh(1).  The possible values are: DAEMON, USER, AUTH, LOCAL0,
+             LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.  The
+             default is USER.
+
+     TCPKeepAlive
+             Specifies whether the system should send TCP keepalive messages
+             to the other side.  If they are sent, death of the connection or
+             crash of one of the machines will be properly noticed.  However,
+             this means that connections will die if the route is down
+             temporarily, and some people find it annoying.
+
+             The default is yes (to send TCP keepalive messages), and the
+             client will notice if the network goes down or the remote host
+             dies.  This is important in scripts, and many users want it too.
+
+             To disable TCP keepalive messages, the value should be set to no.
+             See also ServerAliveInterval for protocol-level keepalives.
+
+     Tunnel  Request tun(4) device forwarding between the client and the
+             server.  The argument must be yes, point-to-point (layer 3),
+             ethernet (layer 2), or no (the default).  Specifying yes requests
+             the default tunnel mode, which is point-to-point.
+
+     TunnelDevice
+             Specifies the tun(4) devices to open on the client (local_tun)
+             and the server (remote_tun).
+
+             The argument must be local_tun[:remote_tun].  The devices may be
+             specified by numerical ID or the keyword any, which uses the next
+             available tunnel device.  If remote_tun is not specified, it
+             defaults to any.  The default is any:any.
+
+     UpdateHostKeys
+             Specifies whether ssh(1) should accept notifications of
+             additional hostkeys from the server sent after authentication has
+             completed and add them to UserKnownHostsFile.  The argument must
+             be yes, no or ask.  This option allows learning alternate
+             hostkeys for a server and supports graceful key rotation by
+             allowing a server to send replacement public keys before old ones
+             are removed.  Additional hostkeys are only accepted if the key
+             used to authenticate the host was already trusted or explicitly
+             accepted by the user.
+
+             UpdateHostKeys is enabled by default if the user has not
+             overridden the default UserKnownHostsFile setting, otherwise
+             UpdateHostKeys will be set to ask.
+
+             If UpdateHostKeys is set to ask, then the user is asked to
+             confirm the modifications to the known_hosts file.  Confirmation
+             is currently incompatible with ControlPersist, and will be
+             disabled if it is enabled.
+
+             Presently, only sshd(8) from OpenSSH 6.8 and greater support the
+             "hostkeys@openssh.com" protocol extension used to inform the
+             client of all the server's hostkeys.
+
+     User    Specifies the user to log in as.  This can be useful when a
+             different user name is used on different machines.  This saves
+             the trouble of having to remember to give the user name on the
+             command line.
+
+     UserKnownHostsFile
+             Specifies one or more files to use for the user host key
+             database, separated by whitespace.  Each filename may use tilde
+             notation to refer to the user's home directory, the tokens
+             described in the TOKENS section and environment variables as
+             described in the ENVIRONMENT VARIABLES section.  The default is
+             ~/.ssh/known_hosts, ~/.ssh/known_hosts2.
+
+     VerifyHostKeyDNS
+             Specifies whether to verify the remote key using DNS and SSHFP
+             resource records.  If this option is set to yes, the client will
+             implicitly trust keys that match a secure fingerprint from DNS.
+             Insecure fingerprints will be handled as if this option was set
+             to ask.  If this option is set to ask, information on fingerprint
+             match will be displayed, but the user will still need to confirm
+             new host keys according to the StrictHostKeyChecking option.  The
+             default is no.
+
+             See also VERIFYING HOST KEYS in ssh(1).
+
+     VisualHostKey
+             If this flag is set to yes, an ASCII art representation of the
+             remote host key fingerprint is printed in addition to the
+             fingerprint string at login and for unknown host keys.  If this
+             flag is set to no (the default), no fingerprint strings are
+             printed at login and only the fingerprint string will be printed
+             for unknown host keys.
+
+     XAuthLocation
+             Specifies the full pathname of the xauth(1) program.  The default
+             is /usr/X11R6/bin/xauth.
+
+PATTERNS
+     A pattern consists of zero or more non-whitespace characters, M-bM-^@M-^X*M-bM-^@M-^Y (a
+     wildcard that matches zero or more characters), or M-bM-^@M-^X?M-bM-^@M-^Y (a wildcard that
+     matches exactly one character).  For example, to specify a set of
+     declarations for any host in the ".co.uk" set of domains, the following
+     pattern could be used:
+
+           Host *.co.uk
+
+     The following pattern would match any host in the 192.168.0.[0-9] network
+     range:
+
+           Host 192.168.0.?
+
+     A pattern-list is a comma-separated list of patterns.  Patterns within
+     pattern-lists may be negated by preceding them with an exclamation mark
+     (M-bM-^@M-^X!M-bM-^@M-^Y).  For example, to allow a key to be used from anywhere within an
+     organization except from the "dialup" pool, the following entry (in
+     authorized_keys) could be used:
+
+           from="!*.dialup.example.com,*.example.com"
+
+     Note that a negated match will never produce a positive result by itself.
+     For example, attempting to match "host3" against the following pattern-
+     list will fail:
+
+           from="!host1,!host2"
+
+     The solution here is to include a term that will yield a positive match,
+     such as a wildcard:
+
+           from="!host1,!host2,*"
+
+TOKENS
+     Arguments to some keywords can make use of tokens, which are expanded at
+     runtime:
+
+           %%    A literal M-bM-^@M-^X%M-bM-^@M-^Y.
+           %C    Hash of %l%h%p%r.
+           %d    Local user's home directory.
+           %h    The remote hostname.
+           %i    The local user ID.
+           %k    The host key alias if specified, otherwise the orignal remote
+                 hostname given on the command line.
+           %L    The local hostname.
+           %l    The local hostname, including the domain name.
+           %n    The original remote hostname, as given on the command line.
+           %p    The remote port.
+           %r    The remote username.
+           %T    The local tun(4) or tap(4) network interface assigned if
+                 tunnel forwarding was requested, or "NONE" otherwise.
+           %u    The local username.
+
+     CertificateFile, ControlPath, IdentityAgent, IdentityFile, LocalForward,
+     Match exec, RemoteCommand, RemoteForward, and UserKnownHostsFile accept
+     the tokens %%, %C, %d, %h, %i, %L, %l, %n, %p, %r, and %u.
+
+     Hostname accepts the tokens %% and %h.
+
+     LocalCommand accepts all tokens.
+
+     ProxyCommand accepts the tokens %%, %h, %n, %p, and %r.
+
+ENVIRONMENT VARIABLES
+     Arguments to some keywords can be expanded at runtime from environment
+     variables on the client by enclosing them in ${}, for example
+     ${HOME}/.ssh would refer to the user's .ssh directory.  If a specified
+     environment variable does not exist then an error will be returned and
+     the setting for that keyword will be ignored.
+
+     The keywords CertificateFile, ControlPath, IdentityAgent, IdentityFile
+     and UserKnownHostsFile support environment variables.  The keywords
+     LocalForward and RemoteForward support environment variables only for
+     Unix domain socket paths.
+
+FILES
+     ~/.ssh/config
+             This is the per-user configuration file.  The format of this file
+             is described above.  This file is used by the SSH client.
+             Because of the potential for abuse, this file must have strict
+             permissions: read/write for the user, and not writable by others.
+
+     /etc/ssh/ssh_config
+             Systemwide configuration file.  This file provides defaults for
+             those values that are not specified in the user's configuration
+             file, and for those users who do not have a configuration file.
+             This file must be world-readable.
+
+SEE ALSO
+     ssh(1)
+
+AUTHORS
+     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
+     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
+     de Raadt and Dug Song removed many bugs, re-added newer features and
+     created OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     versions 1.5 and 2.0.
+
+OpenBSD 6.8                     August 11, 2020                    OpenBSD 6.8