diff options
Diffstat (limited to 'include/VBox/err.h')
| -rw-r--r-- | include/VBox/err.h | 2975 |
1 files changed, 2975 insertions, 0 deletions
diff --git a/include/VBox/err.h b/include/VBox/err.h new file mode 100644 index 00000000..f39610e8 --- /dev/null +++ b/include/VBox/err.h @@ -0,0 +1,2975 @@ +/** @file + * VirtualBox Status Codes. + */ + +/* + * Copyright (C) 2006-2020 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + +#ifndef VBOX_INCLUDED_err_h +#define VBOX_INCLUDED_err_h +#ifndef RT_WITHOUT_PRAGMA_ONCE +# pragma once +#endif + +#include <VBox/cdefs.h> +#include <iprt/err.h> + + +/** @defgroup grp_err VBox Error Codes + * @{ + */ + +/* SED-START */ + +/** @name Misc. Status Codes + * @{ + */ +/** Failed to allocate VM memory. */ +#define VERR_NO_VM_MEMORY (-1000) +/** RC is toasted and the VMM should be terminated at once, but no need to + * panic about it :-) */ +#define VERR_DONT_PANIC (-1001) +/** Unsupported CPU. */ +#define VERR_UNSUPPORTED_CPU (-1002) +/** Unsupported CPU mode. */ +#define VERR_UNSUPPORTED_CPU_MODE (-1003) +/** Page not present. */ +#define VERR_PAGE_NOT_PRESENT (-1004) +/** Invalid/Corrupted configuration file. */ +#define VERR_CFG_INVALID_FORMAT (-1005) +/** No configuration value exists. */ +#define VERR_CFG_NO_VALUE (-1006) +/** Selector not present. */ +#define VERR_SELECTOR_NOT_PRESENT (-1007) +/** Not code selector. */ +#define VERR_NOT_CODE_SELECTOR (-1008) +/** Not data selector. */ +#define VERR_NOT_DATA_SELECTOR (-1009) +/** Out of selector bounds. */ +#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010) +/** Invalid selector. Usually beyond table limits. */ +#define VERR_INVALID_SELECTOR (-1011) +/** Invalid requested privilege level. */ +#define VERR_INVALID_RPL (-1012) +/** PML4 entry not present. */ +#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013) +/** Page directory pointer not present. */ +#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014) +/** Raw mode doesn't support SMP. */ +#define VERR_RAW_MODE_INVALID_SMP (-1015) +/** Invalid VM handle. */ +#define VERR_INVALID_VM_HANDLE (-1016) +/** Invalid VM handle. */ +#define VERR_INVALID_VMCPU_HANDLE (-1017) +/** Invalid Virtual CPU ID. */ +#define VERR_INVALID_CPU_ID (-1018) +/** Too many VCPUs. */ +#define VERR_TOO_MANY_CPUS (-1019) +/** The service was disabled on the host. + * Returned by pfnInit in VBoxService to indicated a non-fatal error that + * should results in the particular service being disabled. */ +#define VERR_SERVICE_DISABLED (-1020) +/** The requested feature is not supported in raw-mode. */ +#define VERR_NOT_SUP_IN_RAW_MODE (-1021) +/** Invalid CPU index. */ +#define VERR_INVALID_CPU_INDEX (-1022) +/** This VirtualBox build does not support raw-mode. */ +#define VERR_RAW_MODE_NOT_SUPPORTED (-1023) +/** Essential fields in the shared VM structure doesn't match the global one. */ +#define VERR_INCONSISTENT_VM_HANDLE (-1024) +/** The VM has been restored. */ +#define VERR_VM_RESTORED (-1025) +/** The requested feature is not supported by NEM. */ +#define VERR_NOT_SUP_BY_NEM (-1026) +/** @} */ + + +/** @name Execution Monitor/Manager (EM) Status Codes + * + * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST + * are of vital importance. The lower the number the higher importance + * as a scheduling instruction. + * @{ + */ +/** First scheduling related status code. */ +#define VINF_EM_FIRST 1100 +/** Indicating that the VM is being terminated and that the execution + * shall stop. */ +#define VINF_EM_TERMINATE 1100 +/** Hypervisor code was stepped. + * EM will first send this to the debugger, and if the issue isn't + * resolved there it will enter guru meditation. */ +#define VINF_EM_DBG_HYPER_STEPPED 1101 +/** Hit a breakpoint in the hypervisor code, + * EM will first send this to the debugger, and if the issue isn't + * resolved there it will enter guru meditation. */ +#define VINF_EM_DBG_HYPER_BREAKPOINT 1102 +/** Hit a possible assertion in the hypervisor code, + * EM will first send this to the debugger, and if the issue isn't + * resolved there it will enter guru meditation. */ +#define VINF_EM_DBG_HYPER_ASSERTION 1103 +/** Generic debug event, suspend the VM for debugging. */ +#define VINF_EM_DBG_EVENT 1104 +/** Indicating that the VM should be suspended for debugging because + * the developer wants to inspect the VM state. */ +#define VINF_EM_DBG_STOP 1105 +/** Indicating success single stepping and that EM should report that + * event to the debugger. */ +#define VINF_EM_DBG_STEPPED 1106 +/** Indicating that a breakpoint was hit and that EM should notify the debugger + * and in the event there is no debugger fail fatally. */ +#define VINF_EM_DBG_BREAKPOINT 1107 +/** Indicating that EM should single step an instruction. + * The instruction is stepped in the current execution mode (RAW/REM). */ +#define VINF_EM_DBG_STEP 1108 +/** Indicating that the VM is being turned off and that the EM should + * exit to the VM awaiting the destruction request. */ +#define VINF_EM_OFF 1109 +/** Indicating that the VM has been suspended and that the thread + * should wait for request telling it what to do next. */ +#define VINF_EM_SUSPEND 1110 +/** Indicating that the VM has been reset and that scheduling goes + * back to startup defaults. */ +#define VINF_EM_RESET 1111 +/** Indicating that the VM has executed a halt instruction and that + * the emulation thread should wait for an interrupt before resuming + * execution. */ +#define VINF_EM_HALT 1112 +/** Indicating that the VM has been resumed and that the thread should + * start executing. */ +#define VINF_EM_RESUME 1113 +/** Indicating that we've got an out-of-memory condition and that we need + * to take the appropriate actions to deal with this. + * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT, + * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are + * vital to correctly operating the VM. Also, they can't normally occur together + * with an out-of-memory condition, and even if that should happen the condition + * will be rediscovered before executing any more code. */ +#define VINF_EM_NO_MEMORY 1114 +/** The fatal variant of VINF_EM_NO_MEMORY. */ +#define VERR_EM_NO_MEMORY (-1114) +/** Indicating that a rescheduling to recompiled execution. + * Typically caused by raw-mode executing code which is difficult/slow + * to virtualize rawly. + * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */ +#define VINF_EM_RESCHEDULE_REM 1115 +/** Indicating that a rescheduling to vmx-mode execution (HM/NEM). + * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */ +#define VINF_EM_RESCHEDULE_HM 1116 +/** Indicating that a rescheduling to raw-mode execution. + * Typically caused by REM detecting that raw-mode execution is possible. + * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */ +#define VINF_EM_RESCHEDULE_RAW 1117 +/** Indicating that a rescheduling now is required. Typically caused by + * interrupts having changed the EIP. */ +#define VINF_EM_RESCHEDULE 1118 +/** PARAV call */ +#define VINF_EM_RESCHEDULE_PARAV 1119 +/** Go back into wait for SIPI mode */ +#define VINF_EM_WAIT_SIPI 1120 +/** Last scheduling related status code. (inclusive) */ +#define VINF_EM_LAST 1120 + +/** Reason for leaving RC: Guest trap which couldn't be handled in RC. + * The trap is generally forwarded to the REM and executed there. */ +#define VINF_EM_RAW_GUEST_TRAP 1121 +/** Reason for leaving RC: Interrupted by external interrupt. + * The interrupt needed to be handled by the host OS. */ +#define VINF_EM_RAW_INTERRUPT 1122 +/** Reason for leaving RC: Interrupted by external interrupt while in hypervisor + * code. The interrupt needed to be handled by the host OS and hypervisor + * execution must be resumed. VM state is not complete at this point. */ +#define VINF_EM_RAW_INTERRUPT_HYPER 1123 +/** Reason for leaving RC: A Ring switch was attempted. + * Normal cause of action is to execute this in REM. */ +#define VINF_EM_RAW_RING_SWITCH 1124 +/** Reason for leaving RC: A Ring switch was attempted using software interrupt. + * Normal cause of action is to execute this in REM. */ +#define VINF_EM_RAW_RING_SWITCH_INT 1125 +/** Reason for leaving RC: A privileged instruction was attempted executed. + * Normal cause of action is to execute this in REM. */ +#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126 + +/** Reason for leaving RZ: Emulate instruction. */ +#define VINF_EM_RAW_EMULATE_INSTR 1127 +/** Reason for leaving RC: Unhandled TSS write. + * Recompiler gets control. */ +#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128 +/** Reason for leaving RC: Unhandled LDT write. + * Recompiler gets control. */ +#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129 +/** Reason for leaving RC: Unhandled IDT write. + * Recompiler gets control. */ +#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130 +/** Reason for leaving RC: Partly handled GDT write. + * Recompiler gets control. */ +#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131 +/** Reason for leaving RC: jump inside generated patch jump. + * Fatal error. */ +#define VERR_EM_RAW_PATCH_CONFLICT (-1133) +/** Reason for leaving RZ: Ring-3 operation pending. */ +#define VINF_EM_RAW_TO_R3 1135 +/** Reason for leaving RZ: Timer pending. */ +#define VINF_EM_RAW_TIMER_PENDING 1136 +/** Reason for leaving RC: Interrupt pending (guest). */ +#define VINF_EM_RAW_INTERRUPT_PENDING 1137 +/** Reason for leaving RC: Encountered a stale selector. */ +#define VINF_EM_RAW_STALE_SELECTOR 1138 +/** Reason for leaving RC: The IRET resuming guest code trapped. */ +#define VINF_EM_RAW_IRET_TRAP 1139 +/** The interpreter was unable to deal with the instruction at hand. */ +#define VERR_EM_INTERPRETER (-1148) +/** Internal EM error caused by an unknown warning or informational status code. */ +#define VERR_EM_INTERNAL_ERROR (-1149) +/** Pending VM request packet. */ +#define VINF_EM_PENDING_REQUEST 1150 +/** Start instruction stepping (debug only). */ +#define VINF_EM_RAW_EMULATE_DBG_STEP 1151 +/** Patch TPR access instruction. */ +#define VINF_EM_HM_PATCH_TPR_INSTR 1152 +/** Unexpected guest mapping conflict detected. */ +#define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154) +/** Reason for leaving RC: A triple-fault condition. Currently, causes + * a guru meditation. */ +#define VINF_EM_TRIPLE_FAULT 1155 +/** The specified execution engine cannot execute guest code in the current + * state. */ +#define VERR_EM_CANNOT_EXEC_GUEST (-1156) +/** Reason for leaving RC: Inject a TRPM event. */ +#define VINF_EM_RAW_INJECT_TRPM_EVENT 1157 +/** Guest tried to trigger a CPU hang. The guest is probably up to no good. */ +#define VERR_EM_GUEST_CPU_HANG (-1158) +/** Reason for leaving RZ: Pending ring-3 IN instruction. */ +#define VINF_EM_PENDING_R3_IOPORT_READ 1159 +/** Reason for leaving RZ: Pending ring-3 OUT instruction. */ +#define VINF_EM_PENDING_R3_IOPORT_WRITE 1160 +/** Trick for resuming EMHistoryExec after a VMCPU_FF_IOM is handled. */ +#define VINF_EM_RESUME_R3_HISTORY_EXEC 1161 +/** @} */ + + +/** @name Debugging Facility (DBGF) DBGF Status Codes + * @{ + */ +/** The function called requires the caller to be attached as a + * debugger to the VM. */ +#define VERR_DBGF_NOT_ATTACHED (-1200) +/** Someone (including the caller) was already attached as + * debugger to the VM. */ +#define VERR_DBGF_ALREADY_ATTACHED (-1201) +/** Tried to halt a debugger which was already halted. + * (This is a warning and not an error.) */ +#define VWRN_DBGF_ALREADY_HALTED 1202 +/** The DBGF has no more free breakpoint slots. */ +#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203) +/** The DBGF couldn't find the specified breakpoint. */ +#define VERR_DBGF_BP_NOT_FOUND (-1204) +/** Attempted to enabled a breakpoint which was already enabled. */ +#define VINF_DBGF_BP_ALREADY_ENABLED 1205 +/** Attempted to disabled a breakpoint which was already disabled. */ +#define VINF_DBGF_BP_ALREADY_DISABLED 1206 +/** The breakpoint already exists. */ +#define VINF_DBGF_BP_ALREADY_EXIST 1207 +/** The byte string was not found. */ +#define VERR_DBGF_MEM_NOT_FOUND (-1208) +/** The OS was not detected. */ +#define VERR_DBGF_OS_NOT_DETCTED (-1209) +/** The OS was not detected. */ +#define VINF_DBGF_OS_NOT_DETCTED 1209 +/** The specified register was not found. */ +#define VERR_DBGF_REGISTER_NOT_FOUND (-1210) +/** The value was truncated to fit. + * For queries this means that the register is wider than the queried value. + * For setters this means that the value is wider than the register. */ +#define VINF_DBGF_TRUNCATED_REGISTER 1211 +/** The value was zero extended to fit. + * For queries this means that the register is narrower than the queried value. + * For setters this means that the value is narrower than the register. */ +#define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212 +/** The requested type conversion was not supported. */ +#define VERR_DBGF_UNSUPPORTED_CAST (-1213) +/** The register is read-only and cannot be modified. */ +#define VERR_DBGF_READ_ONLY_REGISTER (-1214) +/** Internal processing error \#1 in the DBGF register code. */ +#define VERR_DBGF_REG_IPE_1 (-1215) +/** Internal processing error \#2 in the DBGF register code. */ +#define VERR_DBGF_REG_IPE_2 (-1216) +/** Unhandled \#DB in hypervisor code. */ +#define VERR_DBGF_HYPER_DB_XCPT (-1217) +/** Internal processing error \#1 in the DBGF stack code. */ +#define VERR_DBGF_STACK_IPE_1 (-1218) +/** Internal processing error \#2 in the DBGF stack code. */ +#define VERR_DBGF_STACK_IPE_2 (-1219) +/** No trace buffer available, please change the VM config. */ +#define VERR_DBGF_NO_TRACE_BUFFER (-1220) +/** @} */ + + +/** @name Patch Manager (PATM) Status Codes + * @{ + */ +/** Non fatal Patch Manager analysis phase warning */ +#define VWRN_CONTINUE_ANALYSIS 1400 +/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */ +#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS +/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */ +#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS +/** Patch installation refused (patch too complex or unsupported instructions ) */ +#define VERR_PATCHING_REFUSED (-1401) +/** Unable to find patch */ +#define VERR_PATCH_NOT_FOUND (-1402) +/** Patch disabled */ +#define VERR_PATCH_DISABLED (-1403) +/** Patch enabled */ +#define VWRN_PATCH_ENABLED 1404 +/** Patch was already disabled */ +#define VERR_PATCH_ALREADY_DISABLED (-1405) +/** Patch was already enabled */ +#define VERR_PATCH_ALREADY_ENABLED (-1406) +/** Patch was removed. */ +#define VWRN_PATCH_REMOVED 1407 + +/** Reason for leaving RC: \#GP with EIP pointing to patch code. */ +#define VINF_PATM_PATCH_TRAP_GP 1408 +/** First leave RC code. */ +#define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP +/** Reason for leaving RC: \#PF with EIP pointing to patch code. */ +#define VINF_PATM_PATCH_TRAP_PF 1409 +/** Reason for leaving RC: int3 with EIP pointing to patch code. */ +#define VINF_PATM_PATCH_INT3 1410 +/** Reason for leaving RC: \#PF for monitored patch page. */ +#define VINF_PATM_CHECK_PATCH_PAGE 1411 +/** Reason for leaving RC: duplicate instruction called at current eip. */ +#define VINF_PATM_DUPLICATE_FUNCTION 1412 +/** Execute one instruction with the recompiler */ +#define VINF_PATCH_EMULATE_INSTR 1413 +/** Reason for leaving RC: attempt to patch MMIO write. */ +#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414 +/** Reason for leaving RC: attempt to patch MMIO read. */ +#define VINF_PATM_HC_MMIO_PATCH_READ 1415 +/** Reason for leaving RC: pending irq after iret that sets IF. */ +#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416 +/** Last leave RC code. */ +#define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET + +/** No conflicts to resolve */ +#define VERR_PATCH_NO_CONFLICT (-1425) +/** Detected unsafe code for patching */ +#define VERR_PATM_UNSAFE_CODE (-1426) +/** Terminate search branch */ +#define VWRN_PATCH_END_BRANCH 1427 +/** Already patched */ +#define VERR_PATM_ALREADY_PATCHED (-1428) +/** Spinlock detection failed. */ +#define VINF_PATM_SPINLOCK_FAILED (1429) +/** Continue execution after patch trap. */ +#define VINF_PATCH_CONTINUE (1430) +/** The patch manager is not used because we're using HM and VT-x/AMD-V. */ +#define VERR_PATM_HM_IPE (-1431) +/** Unexpected trap in patch code. */ +#define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432) + +/** @} */ + + +/** @name Code Scanning and Analysis Manager (CSAM) Status Codes + * @{ + */ +/** Trap not handled */ +#define VWRN_CSAM_TRAP_NOT_HANDLED 1500 +/** Patch installed */ +#define VWRN_CSAM_INSTRUCTION_PATCHED 1501 +/** Page record not found */ +#define VWRN_CSAM_PAGE_NOT_FOUND 1502 +/** Reason for leaving RC: CSAM wants perform a task in ring-3. */ +#define VINF_CSAM_PENDING_ACTION 1503 +/** The CSAM is not used because we're using HM and VT-x/AMD-V. */ +#define VERR_CSAM_HM_IPE (-1504) +/** @} */ + + +/** @name Page Monitor/Manager (PGM) Status Codes + * @{ + */ +/** Attempt to create a GC mapping which conflicts with an existing mapping. */ +#define VERR_PGM_MAPPING_CONFLICT (-1600) +/** The physical handler range has no corresponding RAM range. + * If this is MMIO, see todo above the return. If not MMIO, then it's + * someone else's fault... */ +#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601) +/** Attempt to register an access handler for a virtual range of which a part + * was already handled. */ +#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602) +/** Attempt to register an access handler for a physical range of which a part + * was already handled. */ +#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603) +/** Invalid page directory specified to PGM. */ +#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604) +/** Invalid GC physical address. */ +#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605) +/** Invalid GC physical range. Usually used when a specified range crosses + * a RAM region boundary. */ +#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606) +/** Specified access handler was not found. */ +#define VERR_PGM_HANDLER_NOT_FOUND (-1607) +/** Attempt to register a RAM range of which parts are already + * covered by existing RAM ranges. */ +#define VERR_PGM_RAM_CONFLICT (-1608) +/** Failed to add new mappings because the current mappings are fixed + * in guest os memory. */ +#define VERR_PGM_MAPPINGS_FIXED (-1609) +/** Failed to fix mappings because of a conflict with the intermediate code. */ +#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610) +/** Failed to fix mappings because a mapping rejected the address. */ +#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611) +/** Failed to fix mappings because the proposed memory area was to small. */ +#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612) +/** Reason for leaving RZ: The urge to syncing CR3. */ +#define VINF_PGM_SYNC_CR3 1613 +/** Page not marked for dirty bit tracking */ +#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614 +/** Page fault caused by dirty bit tracking; corrected */ +#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615 +/** Go ahead with the default Read/Write operation. + * This is returned by a R3 physical or virtual handler when it wants the + * PGMPhys[Read|Write] routine do the reading/writing. */ +#define VINF_PGM_HANDLER_DO_DEFAULT 1616 +/** The paging mode of the host is not supported yet. */ +#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617) +/** The physical guest page is a reserved/MMIO page and does not have any HC + * address. */ +#define VERR_PGM_PHYS_PAGE_RESERVED (-1618) +/** No page directory available for the hypervisor. */ +#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619) + + +/** The returned shadow page is cached. */ +#define VINF_PGM_CACHED_PAGE 1622 +/** Returned by handler registration, modification and deregistration + * when the shadow PTs could be updated because the guest page + * aliased or/and mapped by multiple PTs. */ +#define VINF_PGM_GCPHYS_ALIASED 1623 +/** Reason for leaving RC: Paging mode changed. + * PGMChangeMode() uses this to force a switch to R3 so it can safely deal with + * a mode switch. */ +#define VINF_PGM_CHANGE_MODE 1624 +/** SyncPage modified the PDE. + * This is an internal status code used to communicate back to the \#PF handler + * that the PDE was (probably) marked not-present and it should restart the instruction. */ +#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625 +/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */ +#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626) +/** Conflict between the core memory and the intermediate paging context, try again. + * There are some very special conditions applying to the intermediate paging context + * (used during the world switches), and some times we continuously run into these + * when asking the host kernel for memory during VM init. Let us know if you run into + * this and we'll adjust the code so it tries harder to avoid it. + */ +#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627) +/** The shadow paging mode is not supported yet. */ +#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628) +/** The dynamic mapping cache for physical memory failed. */ +#define VERR_PGM_DYNMAP_FAILED (-1629) +/** The auto usage cache for the dynamic mapping set is full. */ +#define VERR_PGM_DYNMAP_FULL_SET (-1630) +/** The initialization of the dynamic mapping cache failed. */ +#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631) +/** The expanding of the dynamic mapping cache failed. */ +#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632) +/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */ +#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633) +/** Catch any access and route it thru PGM. */ +#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634) +/** Catch write access and route it thru PGM. */ +#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635 +/** Catch write access and route it thru PGM. */ +#define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635) +/** No CR3 root shadow page table. */ +#define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636) +/** Trying to free a page with an invalid Page ID. */ +#define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637) +/** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */ +#define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638) +/** Trying to free a page that isn't RAM. */ +#define VERR_PGM_PHYS_NOT_RAM (-1639) +/** Not ROM page. */ +#define VERR_PGM_PHYS_NOT_ROM (-1640) +/** Not MMIO page. */ +#define VERR_PGM_PHYS_NOT_MMIO (-1641) +/** Not MMIO2 page. */ +#define VERR_PGM_PHYS_NOT_MMIO2 (-1642) +/** Already aliased to a different page. */ +#define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643) +/** Already aliased to the same page. */ +#define VINF_PGM_HANDLER_ALREADY_ALIASED (1643) +/** PGM pool flush pending - return to ring 3. */ +#define VINF_PGM_POOL_FLUSH_PENDING (1644) +/** Unable to use the range for a large page. */ +#define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645) +/** Don't mess around with ballooned pages. */ +#define VERR_PGM_PHYS_PAGE_BALLOONED (-1646) +/** Internal processing error \#1 in page access handler code. */ +#define VERR_PGM_HANDLER_IPE_1 (-1647) + + +/** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */ +#define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651) +/** Guest mappings are disabled. */ +#define VERR_PGM_MAPPINGS_DISABLED (-1652) +/** No guest mappings when SMP is enabled. */ +#define VERR_PGM_MAPPINGS_SMP (-1653) +/** Invalid saved page state. */ +#define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654) +/** Encountered an unexpected page type in the saved state. */ +#define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655) +/** Encountered an unexpected page state in the saved state. */ +#define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656) +/** Couldn't find MMIO2 range from saved state. */ +#define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657) +/** Couldn't find MMIO2 page from saved state. */ +#define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658) +/** Couldn't find ROM range from saved state. */ +#define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659) +/** Couldn't find ROM page from saved state. */ +#define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660) +/** ROM page mismatch between saved state and the VM. */ +#define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661) +/** Unknown saved state record. */ +#define VERR_PGM_SAVED_REC_TYPE (-1662) +/** Internal processing error in the PGM dynmap (r0/rc). */ +#define VERR_PGM_DYNMAP_IPE (-1663) +/** Internal processing error in the PGM handy page allocator. */ +#define VERR_PGM_HANDY_PAGE_IPE (-1664) +/** Failed to map the guest PML4. */ +#define VERR_PGM_PML4_MAPPING (-1665) +/** Failed to obtain a pool page. */ +#define VERR_PGM_POOL_GET_PAGE_FAILED (-1666) +/** A PGM function was called in a mode where it isn't supposed to be used. */ +#define VERR_PGM_NOT_USED_IN_MODE (-1667) +/** The CR3 address specified memory we don't know about. */ +#define VERR_PGM_INVALID_CR3_ADDR (-1668) +/** One or the PDPEs specified memory we don't know about. */ +#define VERR_PGM_INVALID_PDPE_ADDR (-1669) +/** Internal processing error in the PGM physical handler code. */ +#define VERR_PGM_PHYS_HANDLER_IPE (-1670) +/** Internal processing error \#1 in the PGM physial page mapping code. */ +#define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671) +/** Internal processing error \#2 in the PGM physial page mapping code. */ +#define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672) +/** Internal processing error \#3 in the PGM physial page mapping code. */ +#define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673) +/** Internal processing error \#4 in the PGM physial page mapping code. */ +#define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674) +/** Too many loops looking for a page to reuse. */ +#define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675) +/** Internal processing error related to guest mappings. */ +#define VERR_PGM_MAPPING_IPE (-1676) +/** An attempt was made to grow an already maxed out page pool. */ +#define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677) +/** Internal processing error in the page pool code. */ +#define VERR_PGM_POOL_IPE (-1678) +/** The write monitor is already engaged. */ +#define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679) +/** Failed to get a guest page which is expected to be present. */ +#define VERR_PGM_PHYS_PAGE_GET_IPE (-1680) +/** We were given a NULL pPage parameter. */ +#define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681) +/** PCI passthru is not supported by this build. */ +#define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682) +/** Too many MMIO2 ranges. */ +#define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683) +/** Internal processing error in the PGM physical page mapping code dealing + * with MMIO2 pages. */ +#define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684) +/** Internal processing error in the PGM physcal page handling code related to + * MMIO/MMIO2. */ +#define VERR_PGM_PHYS_MMIO_EX_IPE (-1685) +/** Mode table internal error. */ +#define VERR_PGM_MODE_IPE (-1686) +/** Shadow mode 'none' internal error. */ +#define VERR_PGM_SHW_NONE_IPE (-1687) +/** @} */ + + +/** @name Memory Monitor (MM) Status Codes + * @{ + */ +/** Attempt to register a RAM range of which parts are already + * covered by existing RAM ranges. */ +#define VERR_MM_RAM_CONFLICT (-1700) +/** Hypervisor memory allocation failed. */ +#define VERR_MM_HYPER_NO_MEMORY (-1701) +/** A bad trap type ended up in mmGCRamTrap0eHandler. */ +#define VERR_MM_BAD_TRAP_TYPE_IPE (-1702) +/** @} */ + + +/** @name CPU Monitor (CPUM) Status Codes + * @{ + */ +/** The caller shall raise an \#GP(0) exception. */ +#define VERR_CPUM_RAISE_GP_0 (-1750) +/** Incompatible CPUM configuration. */ +#define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751) +/** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden + * parts of the CS register. */ +#define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752) +/** Couldn't find the end of CPUID sub-leaves. */ +#define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753) +/** CPUM internal processing error \#1. */ +#define VERR_CPUM_IPE_1 (-1754) +/** CPUM internal processing error \#2. */ +#define VERR_CPUM_IPE_2 (-1755) +/** The specified CPU cannot be found in the CPU database. */ +#define VERR_CPUM_DB_CPU_NOT_FOUND (-1756) +/** Invalid CPUMCPU offset in MSR range. */ +#define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757) +/** Return to ring-3 to read the MSR there. */ +#define VINF_CPUM_R3_MSR_READ (1758) +/** Return to ring-3 to write the MSR there. */ +#define VINF_CPUM_R3_MSR_WRITE (1759) +/** Too many CPUID leaves. */ +#define VERR_TOO_MANY_CPUID_LEAVES (-1760) +/** Invalid config value. */ +#define VERR_CPUM_INVALID_CONFIG_VALUE (-1761) +/** The loaded XSAVE component mask is not compatible with the host CPU + * or/and VM config. */ +#define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762) +/** The loaded XSAVE component mask is not valid. */ +#define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763) +/** The loaded XSAVE header is not valid. */ +#define VERR_CPUM_INVALID_XSAVE_HDR (-1764) +/** The loaded XCR0 register value is not valid. */ +#define VERR_CPUM_INVALID_XCR0 (-1765) +/** Indicates that we modified the host CR0 (FPU related). */ +#define VINF_CPUM_HOST_CR0_MODIFIED (1766) +/** Invalid/unsupported nested hardware virtualization configuration. */ +#define VERR_CPUM_INVALID_HWVIRT_CONFIG (-1767) +/** Invalid nested hardware virtualization feature combination. */ +#define VERR_CPUM_INVALID_HWVIRT_FEAT_COMBO (-1768) +/** @} */ + + +/** @name Save State Manager (SSM) Status Codes + * @{ + */ +/** The specified data unit already exist. */ +#define VERR_SSM_UNIT_EXISTS (-1800) +/** The specified data unit wasn't found. */ +#define VERR_SSM_UNIT_NOT_FOUND (-1801) +/** The specified data unit wasn't owned by caller. */ +#define VERR_SSM_UNIT_NOT_OWNER (-1802) + +/** General saved state file integrity error. */ +#define VERR_SSM_INTEGRITY (-1810) +/** The saved state file magic was not recognized. */ +#define VERR_SSM_INTEGRITY_MAGIC (-1811) +/** The saved state file version is not supported. */ +#define VERR_SSM_INTEGRITY_VERSION (-1812) +/** The saved state file size didn't match the one in the header. */ +#define VERR_SSM_INTEGRITY_SIZE (-1813) +/** The CRC of the saved state file did not match. */ +#define VERR_SSM_INTEGRITY_CRC (-1814) +/** The machine uuid field wasn't null. */ +#define VERR_SMM_INTEGRITY_MACHINE (-1815) +/** Saved state header integrity error. */ +#define VERR_SSM_INTEGRITY_HEADER (-1816) +/** Unit header integrity error. */ +#define VERR_SSM_INTEGRITY_UNIT (-1817) +/** Invalid unit magic (internal data tag). */ +#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818) +/** The file contained a data unit which no-one wants. */ +#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819) +/** Incorrect version numbers in the header. */ +#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820) +/** Footer integrity error. */ +#define VERR_SSM_INTEGRITY_FOOTER (-1821) +/** Record header integrity error. */ +#define VERR_SSM_INTEGRITY_REC_HDR (-1822) +/** Termination record integrity error. */ +#define VERR_SSM_INTEGRITY_REC_TERM (-1823) +/** Termination record CRC mismatch. */ +#define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824) +/** Decompression integrity error. */ +#define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825) +/** Saved state directory wintertides error. */ +#define VERR_SSM_INTEGRITY_DIR (-1826) +/** The saved state directory magic is wrong. */ +#define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827) + +/** A data unit in the saved state file was defined but didn't any + * routine for processing it. */ +#define VERR_SSM_NO_LOAD_EXEC (-1830) +/** A restore routine attempted to load more data then the unit contained. */ +#define VERR_SSM_LOADED_TOO_MUCH (-1831) +/** Not in the correct state for the attempted operation. */ +#define VERR_SSM_INVALID_STATE (-1832) +/** Not in the correct state for the attempted operation. */ +#define VERR_SSM_LOADED_TOO_LITTLE (-1833) + +/** Unsupported data unit version. + * A SSM user returns this if it doesn't know the u32Version. */ +#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840) +/** The format of a data unit has changed. + * A SSM user returns this if it's not able to read the format for + * other reasons than u32Version. */ +#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841) +/** The CPUID instruction returns different information when loading than when saved. + * Normally caused by hardware changes on the host, but could also be caused by + * changes in the BIOS setup. */ +#define VERR_SSM_LOAD_CPUID_MISMATCH (-1842) +/** The RAM size differs between the saved state and the VM config. */ +#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843) +/** The state doesn't match the VM configuration in one or another way. + * (There are certain PCI reconfiguration which the OS could potentially + * do which can cause this problem. Check this out when it happens.) */ +#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844) +/** The virtual clock frequency differs too much. + * The clock source for the virtual time isn't reliable or the code have changed. */ +#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845) +/** A timeout occurred while waiting for async IDE operations to finish. */ +#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846) +/** One of the structure magics was wrong. */ +#define VERR_SSM_STRUCTURE_MAGIC (-1847) +/** The data in the saved state doesn't conform to expectations. */ +#define VERR_SSM_UNEXPECTED_DATA (-1848) +/** Trying to read a 64-bit guest physical address into a 32-bit variable. */ +#define VERR_SSM_GCPHYS_OVERFLOW (-1849) +/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */ +#define VERR_SSM_GCPTR_OVERFLOW (-1850) +/** Vote for another pass. */ +#define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851 +/** Vote for done tell SSM not to call again until the final pass. */ +#define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852 +/** Vote for giving up. */ +#define VERR_SSM_VOTE_FOR_GIVING_UP (-1853) +/** Don't call again until the final pass. */ +#define VINF_SSM_DONT_CALL_AGAIN 1854 +/** Giving up a live snapshot/teleportation attempt because of too many + * passes. */ +#define VERR_SSM_TOO_MANY_PASSES (-1855) +/** Giving up a live snapshot/teleportation attempt because the state grew to + * big. */ +#define VERR_SSM_STATE_GREW_TOO_BIG (-1856) +/** Giving up a live snapshot attempt because we're low on disk space. */ +#define VERR_SSM_LOW_ON_DISK_SPACE (-1857) +/** The operation was cancelled. */ +#define VERR_SSM_CANCELLED (-1858) +/** Nothing that can be cancelled. */ +#define VERR_SSM_NO_PENDING_OPERATION (-1859) +/** The operation has already been cancelled. */ +#define VERR_SSM_ALREADY_CANCELLED (-1860) +/** The machine was powered off while saving. */ +#define VERR_SSM_LIVE_POWERED_OFF (-1861) +/** The live snapshot/teleportation operation was aborted because of a guru + * meditation. */ +#define VERR_SSM_LIVE_GURU_MEDITATION (-1862) +/** The live snapshot/teleportation operation was aborted because of a fatal + * runtime error. */ +#define VERR_SSM_LIVE_FATAL_ERROR (-1863) +/** The VM was suspended before or while saving, don't resume execution. */ +#define VINF_SSM_LIVE_SUSPENDED 1864 +/** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the + * extended API. */ +#define VERR_SSM_FIELD_COMPLEX (-1864) +/** Invalid size of a SSM field with the specified transformation. */ +#define VERR_SSM_FIELD_INVALID_SIZE (-1865) +/** The specified field is outside the structure. */ +#define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866) +/** The field does not follow immediately the previous one. */ +#define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867) +/** The field contains an invalid callback or transformation index. */ +#define VERR_SSM_FIELD_INVALID_CALLBACK (-1868) +/** The field contains an invalid padding size. */ +#define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869) +/** The field contains a value that is out of range. */ +#define VERR_SSM_FIELD_INVALID_VALUE (-1870) +/** Generic stream error. */ +#define VERR_SSM_STREAM_ERROR (-1871) +/** SSM did a callback for a pass we didn't expect. */ +#define VERR_SSM_UNEXPECTED_PASS (-1872) +/** Someone is trying to skip backwards in the stream... */ +#define VERR_SSM_SKIP_BACKWARDS (-1873) +/** Someone is trying to write a memory block which is too big to encode. */ +#define VERR_SSM_MEM_TOO_BIG (-1874) +/** Encountered an bad (/unknown) record type. */ +#define VERR_SSM_BAD_REC_TYPE (-1875) +/** Internal processing error \#1 in SSM code. */ +#define VERR_SSM_IPE_1 (-1876) +/** Internal processing error \#2 in SSM code. */ +#define VERR_SSM_IPE_2 (-1877) +/** Internal processing error \#3 in SSM code. */ +#define VERR_SSM_IPE_3 (-1878) +/** A field contained an transformation that should only be used when loading + * old states. */ +#define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879) +/** @} */ + + +/** @name Virtual Machine (VM) Status Codes + * @{ + */ +/** The specified at reset handler wasn't found. */ +#define VERR_VM_ATRESET_NOT_FOUND (-1900) +/** Invalid VM request type. + * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For + * all the other occurrences it means indicates corruption, broken logic, or stupid + * interface user. */ +#define VERR_VM_REQUEST_INVALID_TYPE (-1901) +/** Invalid VM request state. + * The state of the request packet was not the expected and accepted one(s). Either + * the interface user screwed up, or we've got corruption/broken logic. */ +#define VERR_VM_REQUEST_STATE (-1902) +/** Invalid VM request packet. + * One or more of the VM controlled packet members didn't contain the correct + * values. Some thing's broken. */ +#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903) +/** The status field has not been updated yet as the request is still + * pending completion. Someone queried the iStatus field before the request + * has been fully processed. */ +#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904) +/** The request has been freed, don't read the status now. + * Someone is reading the iStatus field of a freed request packet. */ +#define VERR_VM_REQUEST_STATUS_FREED (-1905) +/** A VM api requiring EMT was called from another thread. + * Use the VMR3ReqCall() apis to call it! */ +#define VERR_VM_THREAD_NOT_EMT (-1906) +/** The VM state was invalid for the requested operation. + * Go check the 'VM Statechart Diagram.gif'. */ +#define VERR_VM_INVALID_VM_STATE (-1907) +/** The support driver is not installed. + * On linux, open returned ENOENT. */ +#define VERR_VM_DRIVER_NOT_INSTALLED (-1908) +/** The support driver is not accessible. + * On linux, open returned EPERM. */ +#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909) +/** Was not able to load the support driver. + * On linux, open returned ENODEV. */ +#define VERR_VM_DRIVER_LOAD_ERROR (-1910) +/** Was not able to open the support driver. + * Generic open error used when none of the other ones fit. */ +#define VERR_VM_DRIVER_OPEN_ERROR (-1911) +/** The installed support driver doesn't match the version of the user. */ +#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912) +/** Saving the VM state is temporarily not allowed. Try again later. */ +#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913) +/** An EMT called an API which cannot be called on such a thread. */ +#define VERR_VM_THREAD_IS_EMT (-1914) +/** Encountered an unexpected VM state. */ +#define VERR_VM_UNEXPECTED_VM_STATE (-1915) +/** Unexpected unstable VM state. */ +#define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916) +/** Too many arguments passed to a VM request / request corruption. */ +#define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917) +/** Fatal EMT wait error. */ +#define VERR_VM_FATAL_WAIT_ERROR (-1918) +/** The VM request was killed at VM termination. */ +#define VERR_VM_REQUEST_KILLED (-1919) +/** @} */ + + +/** @name VBox Remote Desktop Protocol (VRDP) Status Codes + * @{ + */ +/** Successful completion of operation (mapped to generic iprt status code). */ +#define VINF_VRDP_SUCCESS VINF_SUCCESS +/** VRDP transport operation timed out (mapped to generic iprt status code). */ +#define VERR_VRDP_TIMEOUT VERR_TIMEOUT + +/** Unsupported ISO protocol feature */ +#define VERR_VRDP_ISO_UNSUPPORTED (-2000) +/** Security (en/decryption) engine error */ +#define VERR_VRDP_SEC_ENGINE_FAIL (-2001) +/** VRDP protocol violation */ +#define VERR_VRDP_PROTOCOL_ERROR (-2002) +/** Unsupported VRDP protocol feature */ +#define VERR_VRDP_NOT_SUPPORTED (-2003) +/** VRDP protocol violation, client sends less data than expected */ +#define VERR_VRDP_INSUFFICIENT_DATA (-2004) +/** Internal error, VRDP packet is in wrong operation mode */ +#define VERR_VRDP_INVALID_MODE (-2005) +/** Memory allocation failed */ +#define VERR_VRDP_NO_MEMORY (-2006) +/** Client has been rejected */ +#define VERR_VRDP_ACCESS_DENIED (-2007) +/** VRPD receives a packet that is not supported */ +#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008 +/** VRDP script allowed the packet to be processed further */ +#define VINF_VRDP_PROCESS_PDU 2009 +/** VRDP script has completed its task */ +#define VINF_VRDP_OPERATION_COMPLETED 2010 +/** VRDP thread has started OK and will run */ +#define VINF_VRDP_THREAD_STARTED 2011 +/** Framebuffer is resized, terminate send bitmap procedure */ +#define VINF_VRDP_RESIZE_REQUESTED 2012 +/** Output can be enabled for the client. */ +#define VINF_VRDP_OUTPUT_ENABLE 2013 +/** @} */ + + +/** @name Configuration Manager (CFGM) Status Codes + * @{ + */ +/** The integer value was too big for the requested representation. */ +#define VERR_CFGM_INTEGER_TOO_BIG (-2100) +/** Child node was not found. */ +#define VERR_CFGM_CHILD_NOT_FOUND (-2101) +/** Path to child node was invalid (i.e. empty). */ +#define VERR_CFGM_INVALID_CHILD_PATH (-2102) +/** Value not found. */ +#define VERR_CFGM_VALUE_NOT_FOUND (-2103) +/** No parent node specified. */ +#define VERR_CFGM_NO_PARENT (-2104) +/** No node was specified. */ +#define VERR_CFGM_NO_NODE (-2105) +/** The value is not an integer. */ +#define VERR_CFGM_NOT_INTEGER (-2106) +/** The value is not a zero terminated character string. */ +#define VERR_CFGM_NOT_STRING (-2107) +/** The value is not a byte string. */ +#define VERR_CFGM_NOT_BYTES (-2108) +/** The specified string / bytes buffer was to small. Specify a larger one and retry. */ +#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109) +/** The path of a new node contained slashes or was empty. */ +#define VERR_CFGM_INVALID_NODE_PATH (-2160) +/** A new node couldn't be inserted because one with the same name exists. */ +#define VERR_CFGM_NODE_EXISTS (-2161) +/** A new leaf couldn't be inserted because one with the same name exists. */ +#define VERR_CFGM_LEAF_EXISTS (-2162) +/** An unknown config value was encountered. */ +#define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163) +/** An unknown config node (key) was encountered. */ +#define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164) +/** Internal processing error \#1 in CFGM. */ +#define VERR_CFGM_IPE_1 (-2165) +/** @} */ + + +/** @name Time Manager (TM) Status Codes + * @{ + */ +/** The loaded timer state was incorrect. */ +#define VERR_TM_LOAD_STATE (-2200) +/** The timer was not in the correct state for the request operation. */ +#define VERR_TM_INVALID_STATE (-2201) +/** The timer was in a unknown state. Corruption or stupid coding error. */ +#define VERR_TM_UNKNOWN_STATE (-2202) +/** The timer was stuck in an unstable state until we grew impatient and returned. */ +#define VERR_TM_UNSTABLE_STATE (-2203) +/** TM requires GIP. */ +#define VERR_TM_GIP_REQUIRED (-2204) +/** TM does not support the GIP version. */ +#define VERR_TM_GIP_VERSION (-2205) +/** The GIP update interval is too large. */ +#define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206) +/** The timer has a bad clock enum value, probably corruption. */ +#define VERR_TM_TIMER_BAD_CLOCK (-2207) +/** The timer failed to reach a stable state. */ +#define VERR_TM_TIMER_UNSTABLE_STATE (-2208) +/** Attempt to resume a running TSC. */ +#define VERR_TM_TSC_ALREADY_TICKING (-2209) +/** Attempt to pause a paused TSC. */ +#define VERR_TM_TSC_ALREADY_PAUSED (-2210) +/** Invalid value for cVirtualTicking. */ +#define VERR_TM_VIRTUAL_TICKING_IPE (-2211) +/** @} */ + + +/** @name Recompiled Execution Manager (REM) Status Codes + * @{ + */ +/** Fatal error in virtual hardware. */ +#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300) +/** Fatal error in the recompiler cpu. */ +#define VERR_REM_VIRTUAL_CPU_ERROR (-2301) +/** Recompiler execution was interrupted by forced action. */ +#define VINF_REM_INTERRUPED_FF 2302 +/** Too many similar traps. This is a very useful debug only + * check (we don't do double/triple faults in REM). */ +#define VERR_REM_TOO_MANY_TRAPS (-2304) +/** The REM is out of breakpoint slots. */ +#define VERR_REM_NO_MORE_BP_SLOTS (-2305) +/** The REM could not find any breakpoint on the specified address. */ +#define VERR_REM_BP_NOT_FOUND (-2306) +/** @} */ + + +/** @name Trap Manager / Monitor (TRPM) Status Codes + * @{ + */ +/** No active trap. Cannot query or reset a non-existing trap. */ +#define VERR_TRPM_NO_ACTIVE_TRAP (-2400) +/** Active trap. Cannot assert a new trap when one is already active. */ +#define VERR_TRPM_ACTIVE_TRAP (-2401) +/** Reason for leaving RC: Guest tried to write to our IDT - fatal. + * The VM will be terminated assuming the worst, i.e. that the + * guest has read the idtr register. */ +#define VERR_TRPM_SHADOW_IDT_WRITE (-2402) +/** Reason for leaving RC: Fatal trap in hypervisor. */ +#define VERR_TRPM_DONT_PANIC (-2403) +/** Reason for leaving RC: Double Fault. */ +#define VERR_TRPM_PANIC (-2404) +/** The exception was dispatched for raw-mode execution. */ +#define VINF_TRPM_XCPT_DISPATCHED 2405 +/** Bad TRPM_TRAP_IN_OP. */ +#define VERR_TRPM_BAD_TRAP_IN_OP (-2406) +/** Internal processing error \#1 in TRPM. */ +#define VERR_TRPM_IPE_1 (-2407) +/** Internal processing error \#2 in TRPM. */ +#define VERR_TRPM_IPE_2 (-2408) +/** Internal processing error \#3 in TRPM. */ +#define VERR_TRPM_IPE_3 (-2409) +/** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */ +#define VERR_TRPM_HM_IPE (-2410) +/** @} */ + + +/** @name Selector Manager / Monitor (SELM) Status Code + * @{ + */ +/** Reason for leaving RC: Guest tried to write to our GDT - fatal. + * The VM will be terminated assuming the worst, i.e. that the + * guest has read the gdtr register. */ +#define VERR_SELM_SHADOW_GDT_WRITE (-2500) +/** Reason for leaving RC: Guest tried to write to our LDT - fatal. + * The VM will be terminated assuming the worst, i.e. that the + * guest has read the ldtr register. */ +#define VERR_SELM_SHADOW_LDT_WRITE (-2501) +/** Reason for leaving RC: Guest tried to write to our TSS - fatal. + * The VM will be terminated assuming the worst, i.e. that the + * guest has read the ltr register. */ +#define VERR_SELM_SHADOW_TSS_WRITE (-2502) +/** Reason for leaving RC: Sync the GDT table to solve a conflict. */ +#define VINF_SELM_SYNC_GDT 2503 +/** No valid TSS present. */ +#define VERR_SELM_NO_TSS (-2504) +/** Invalid guest LDT selector. */ +#define VERR_SELM_INVALID_LDT (-2505) +/** The guest LDT selector is out of bounds. */ +#define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506) +/** Unknown error while reading the guest GDT during shadow table updating. */ +#define VERR_SELM_GDT_READ_ERROR (-2507) +/** The guest GDT so full that we cannot find free space for our own + * selectors. */ +#define VERR_SELM_GDT_TOO_FULL (-2508) +/** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */ +#define VERR_SELM_HM_IPE (-2509) +/** @} */ + + +/** @name I/O Manager / Monitor (IOM) Status Code + * @{ + */ +/** The specified I/O port range was invalid. + * It was either empty or it was out of bounds. */ +#define VERR_IOM_INVALID_IOPORT_RANGE (-2600) +/** The specified R0 or RC I/O port range didn't have a corresponding R3 range. + * IOMR3IOPortRegisterR3() must be called first. */ +#define VERR_IOM_NO_R3_IOPORT_RANGE (-2601) +/** The specified I/O port range intruded on an existing range. There is + * a I/O port conflict between two device, or a device tried to register + * the same range twice. */ +#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602) +/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */ +#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603) +/** The specified I/O port range was owned by some other device(s). Both registration + * and deregistration, but in the first case only RC and R0 ranges. */ +#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604) + +/** The specified MMIO range was invalid. + * It was either empty or it was out of bounds. */ +#define VERR_IOM_INVALID_MMIO_RANGE (-2605) +/** The specified R0 or RC MMIO range didn't have a corresponding R3 range. + * IOMR3MMIORegisterR3() must be called first. */ +#define VERR_IOM_NO_R3_MMIO_RANGE (-2606) +/** The specified MMIO range was owned by some other device(s). Both registration + * and deregistration, but in the first case only RC and R0 ranges. */ +#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607) +/** The specified MMIO range intruded on an existing range. There is + * a MMIO conflict between two device, or a device tried to register + * the same range twice. */ +#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608) +/** The MMIO range specified for removal was not found. */ +#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609) +/** The MMIO range specified for removal was invalid. The range didn't match + * quite match a set of existing ranges. It's not possible to remove parts of + * a MMIO range, only one or more full ranges. */ +#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610) +/** An invalid I/O port size was specified for a read or write operation. */ +#define VERR_IOM_INVALID_IOPORT_SIZE (-2611) +/** The MMIO handler was called for a bogus address! Internal error! */ +#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612) +/** The MMIO handler experienced a problem with the disassembler. */ +#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613) +/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */ +#define VERR_IOM_IOPORT_UNUSED (-2614) +/** Unused MMIO register read, fill with 00. */ +#define VINF_IOM_MMIO_UNUSED_00 2615 +/** Unused MMIO register read, fill with FF. */ +#define VINF_IOM_MMIO_UNUSED_FF 2616 + +/** Reason for leaving RZ: I/O port read. */ +#define VINF_IOM_R3_IOPORT_READ 2620 +/** Reason for leaving RZ: I/O port write. */ +#define VINF_IOM_R3_IOPORT_WRITE 2621 +/** Reason for leaving RZ: Pending I/O port write. Since there is also + * VMCPU_FF_IOM for this condition, it's ok to drop this status code for + * some other VINF_EM_XXX statuses. */ +#define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622 +/** Reason for leaving RZ: MMIO read. */ +#define VINF_IOM_R3_MMIO_READ 2623 +/** Reason for leaving RZ: MMIO write. */ +#define VINF_IOM_R3_MMIO_WRITE 2624 +/** Reason for leaving RZ: MMIO read/write. */ +#define VINF_IOM_R3_MMIO_READ_WRITE 2625 +/** Reason for leaving RZ: Pending MMIO write. Since there is also + * VMCPU_FF_IOM for this condition, it's ok to drop this status code for + * some other VINF_EM_XXX statuses. */ +#define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626 + +/** IOMGCIOPortHandler was given an unexpected opcode. */ +#define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630) +/** Internal processing error \#1 in the I/O port code. */ +#define VERR_IOM_IOPORT_IPE_1 (-2631) +/** Internal processing error \#2 in the I/O port code. */ +#define VERR_IOM_IOPORT_IPE_2 (-2632) +/** Internal processing error \#3 in the I/O port code. */ +#define VERR_IOM_IOPORT_IPE_3 (-2633) +/** Internal processing error \#1 in the MMIO code. */ +#define VERR_IOM_MMIO_IPE_1 (-2634) +/** Internal processing error \#2 in the MMIO code. */ +#define VERR_IOM_MMIO_IPE_2 (-2635) +/** Internal processing error \#3 in the MMIO code. */ +#define VERR_IOM_MMIO_IPE_3 (-2636) +/** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */ +#define VERR_IOM_HM_IPE (-2637) +/** Internal processing error while merging status codes. */ +#define VERR_IOM_FF_STATUS_IPE (-2638) + +/** Too many I/O port registrations. */ +#define VERR_IOM_TOO_MANY_IOPORT_REGISTRATIONS (-2650) +/** Invalid I/O port handle. */ +#define VERR_IOM_INVALID_IOPORT_HANDLE (-2651) +/** I/O ports are already mapped. */ +#define VERR_IOM_IOPORTS_ALREADY_MAPPED (-2652) +/** I/O ports are not mapped. */ +#define VERR_IOM_IOPORTS_NOT_MAPPED (-2653) + +/** Too many MMIO registrations. */ +#define VERR_IOM_TOO_MANY_MMIO_REGISTRATIONS (-2660) +/** Invalid MMIO handle. */ +#define VERR_IOM_INVALID_MMIO_HANDLE (-2661) +/** MMIO region is already mapped. */ +#define VERR_IOM_MMIO_REGION_ALREADY_MAPPED (-2662) +/** MMIO region is not mapped. */ +#define VERR_IOM_MMIO_REGION_NOT_MAPPED (-2663) +/** @} */ + + +/** @name Virtual Machine Monitor (VMM) Status Codes + * @{ + */ +/** Reason for leaving RZ: Calling host function. */ +#define VINF_VMM_CALL_HOST 2700 +/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */ +#define VERR_VMM_RING0_ASSERTION (-2701) +/** The hyper CR3 differs between PGM and CPUM. */ +#define VERR_VMM_HYPER_CR3_MISMATCH (-2702) +/** Reason for leaving RZ: Illegal call to ring-3. */ +#define VERR_VMM_RING3_CALL_DISABLED (-2703) +/** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib. + * If you just upgraded VirtualBox, please terminate all VMs and make sure + * that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again. + * If this error persists, try re-installing VirtualBox. */ +#define VERR_VMM_R0_VERSION_MISMATCH (-2704) +/** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib. + * Re-install if you are a user. Developers should make sure the build is + * complete or try with a clean build. */ +#define VERR_VMM_RC_VERSION_MISMATCH (-2705) +/** VMM set jump error. */ +#define VERR_VMM_SET_JMP_ERROR (-2706) +/** VMM set jump stack overflow error. */ +#define VERR_VMM_SET_JMP_STACK_OVERFLOW (-2707) +/** VMM set jump resume error. */ +#define VERR_VMM_SET_JMP_ABORTED_RESUME (-2708) +/** VMM long jump error. */ +#define VERR_VMM_LONG_JMP_ERROR (-2709) +/** Unknown ring-3 call attempted. */ +#define VERR_VMM_UNKNOWN_RING3_CALL (-2710) +/** The ring-3 call didn't set an RC. */ +#define VERR_VMM_RING3_CALL_NO_RC (-2711) +/** Reason for leaving RC: Caller the tracer in ring-0. */ +#define VINF_VMM_CALL_TRACER (2712) +/** Internal processing error \#1 in the switcher code. */ +#define VERR_VMM_SWITCHER_IPE_1 (-2713) +/** Reason for leaving RZ: Unknown call to ring-3. */ +#define VINF_VMM_UNKNOWN_RING3_CALL (2714) +/** Attempted to use stub switcher. */ +#define VERR_VMM_SWITCHER_STUB (-2715) +/** HM returned in the wrong state. */ +#define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716) +/** SMAP enabled, but the AC flag was found to be clear - check the kernel + * log for details. */ +#define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717) +/** NEM returned in the wrong state. */ +#define VERR_VMM_WRONG_NEM_VMCPU_STATE (-2718) +/** @} */ + + +/** @name Pluggable Device and Driver Manager (PDM) Status Codes + * @{ + */ +/** An invalid LUN specification was given. */ +#define VERR_PDM_NO_SUCH_LUN (-2800) +/** A device encountered an unknown configuration value. + * This means that the device is potentially misconfigured and the device + * construction or unit attachment failed because of this. */ +#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801) +/** The above driver doesn't export a interface required by a driver being + * attached to it. Typical misconfiguration problem. */ +#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802) +/** The below driver doesn't export a interface required by the drive + * having attached it. Typical misconfiguration problem. */ +#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803) +/** A device didn't find a required interface with an attached driver. + * Typical misconfiguration problem. */ +#define VERR_PDM_MISSING_INTERFACE (-2804) +/** A driver encountered an unknown configuration value. + * This means that the driver is potentially misconfigured and the driver + * construction failed because of this. */ +#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805) +/** The PCI bus assigned to a device didn't have room for it. + * Either too many devices are configured on the same PCI bus, or there are + * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */ +#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806) +/** A queue is out of free items, the queueing operation failed. */ +#define VERR_PDM_NO_QUEUE_ITEMS (-2807) +/** Not possible to attach further drivers to the driver. + * A driver which doesn't support attachments (below of course) will + * return this status code if it found that further drivers were configured + * to be attached to it. */ +#define VERR_PDM_DRVINS_NO_ATTACH (-2808) +/** Not possible to attach drivers to the device. + * A device which doesn't support attachments (below of course) will + * return this status code if it found that drivers were configured + * to be attached to it. */ +#define VERR_PDM_DEVINS_NO_ATTACH (-2809) +/** No attached driver. + * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return + * this error when no driver was configured to be attached. */ +#define VERR_PDM_NO_ATTACHED_DRIVER (-2810) +/** The media geometry hasn't been set yet, so it cannot be obtained. + * The caller should then calculate the geometry from the media size. */ +#define VERR_PDM_GEOMETRY_NOT_SET (-2811) +/** The media translation hasn't been set yet, so it cannot be obtained. + * The caller should then guess the translation. */ +#define VERR_PDM_TRANSLATION_NOT_SET (-2812) +/** The media is not mounted, operation requires a mounted media. */ +#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813) +/** Mount failed because a media was already mounted. Unmount the media + * and retry the mount. */ +#define VERR_PDM_MEDIA_MOUNTED (-2814) +/** The media is locked and cannot be unmounted. */ +#define VERR_PDM_MEDIA_LOCKED (-2815) +/** No 'Type' attribute in the DrvBlock configuration. + * Misconfiguration. */ +#define VERR_PDM_BLOCK_NO_TYPE (-2816) +/** The 'Type' attribute in the DrvBlock configuration had an unknown value. + * Misconfiguration. */ +#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817) +/** The 'Translation' attribute in the DrvBlock configuration had an unknown value. + * Misconfiguration. */ +#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818) +/** The block driver type wasn't supported. + * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */ +#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819) +/** A attach or prepare mount call failed because the driver already + * had a driver attached. */ +#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820) +/** An attempt on detaching a driver without anyone actually being attached, or + * performing any other operation on an attached driver. */ +#define VERR_PDM_NO_DRIVER_ATTACHED (-2821) +/** The attached driver configuration is missing the 'Driver' attribute. */ +#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822) +/** The configured driver wasn't found. + * Either the necessary driver modules wasn't loaded, the name was + * misspelled, or it was a misconfiguration. */ +#define VERR_PDM_DRIVER_NOT_FOUND (-2823) +/** The Ring-3 module was already loaded. */ +#define VINF_PDM_ALREADY_LOADED (2824) +/** The name of the module clashed with an existing module. */ +#define VERR_PDM_MODULE_NAME_CLASH (-2825) +/** Couldn't find any export for registration of drivers/devices. */ +#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826) +/** A module name is too long. */ +#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827) +/** Driver name clash. Another driver with the same name as the + * one being registered exists. */ +#define VERR_PDM_DRIVER_NAME_CLASH (-2828) +/** The version of the driver registration structure is unknown + * to this VBox version. Either mixing incompatible versions or + * the structure isn't correctly initialized. */ +#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829) +/** Invalid entry in the driver registration structure. */ +#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830) +/** Invalid host bit mask. */ +#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831) +/** Not possible to detach a driver because the above driver/device + * doesn't support it. The above entity doesn't implement the pfnDetach call. */ +#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832) +/** No PCI Bus is available to register the device with. This is usually a + * misconfiguration or in rare cases a buggy pci device. */ +#define VERR_PDM_NO_PCI_BUS (-2833) +/** The device is not a registered PCI device and thus cannot + * perform any PCI operations. The device forgot to register it self. */ +#define VERR_PDM_NOT_PCI_DEVICE (-2834) + +/** The version of the device registration structure is unknown + * to this VBox version. Either mixing incompatible versions or + * the structure isn't correctly initialized. */ +#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835) +/** Invalid entry in the device registration structure. */ +#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836) +/** Invalid host bit mask. */ +#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837) +/** The guest bit mask didn't match the guest being loaded. */ +#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838) +/** Device name clash. Another device with the same name as the + * one being registered exists. */ +#define VERR_PDM_DEVICE_NAME_CLASH (-2839) +/** The device wasn't found. There was no registered device + * by that name. */ +#define VERR_PDM_DEVICE_NOT_FOUND (-2840) +/** The device instance was not found. */ +#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841) +/** The device instance have no base interface. */ +#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842) +/** The device instance have no such logical unit. */ +#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843) +/** The driver instance could not be found. */ +#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844) +/** Logical Unit was not found. */ +#define VERR_PDM_LUN_NOT_FOUND (-2845) +/** The Logical Unit was found, but it had no driver attached to it. */ +#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846) +/** The Logical Unit was found, but it had no driver attached to it. */ +#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846 +/** No PIC device instance is registered with the current VM and thus + * the PIC operation cannot be performed. */ +#define VERR_PDM_NO_PIC_INSTANCE (-2847) +/** No APIC device instance is registered with the current VM and thus + * the APIC operation cannot be performed. */ +#define VERR_PDM_NO_APIC_INSTANCE (-2848) +/** No DMAC device instance is registered with the current VM and thus + * the DMA operation cannot be performed. */ +#define VERR_PDM_NO_DMAC_INSTANCE (-2849) +/** No RTC device instance is registered with the current VM and thus + * the RTC or CMOS operation cannot be performed. */ +#define VERR_PDM_NO_RTC_INSTANCE (-2850) +/** Unable to open the host interface due to a sharing violation . */ +#define VERR_PDM_HIF_SHARING_VIOLATION (-2851) +/** Unable to open the host interface. */ +#define VERR_PDM_HIF_OPEN_FAILED (-2852) +/** The device doesn't support runtime driver attaching. + * The PDMDEVREG::pfnAttach callback function is NULL. */ +#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853) +/** The driver doesn't support runtime driver attaching. + * The PDMDRVREG::pfnAttach callback function is NULL. */ +#define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854) +/** Invalid host interface version. */ +#define VERR_PDM_HIF_INVALID_VERSION (-2855) + +/** The version of the USB device registration structure is unknown + * to this VBox version. Either mixing incompatible versions or + * the structure isn't correctly initialized. */ +#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856) +/** Invalid entry in the device registration structure. */ +#define VERR_PDM_INVALID_USB_REGISTRATION (-2857) +/** Driver name clash. Another driver with the same name as the + * one being registered exists. */ +#define VERR_PDM_USB_NAME_CLASH (-2858) +/** The USB hub is already registered. */ +#define VERR_PDM_USB_HUB_EXISTS (-2859) +/** Couldn't find any USB hubs to attach the device to. */ +#define VERR_PDM_NO_USB_HUBS (-2860) +/** Couldn't find any free USB ports to attach the device to. */ +#define VERR_PDM_NO_USB_PORTS (-2861) +/** Couldn't find the USB Proxy device. Using OSE? */ +#define VERR_PDM_NO_USBPROXY (-2862) +/** The async completion template is still used. */ +#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863) +/** The async completion task is already suspended. */ +#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864) +/** The async completion task is not suspended. */ +#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865) +/** The driver properties were invalid, and as a consequence construction + * failed. Caused my unusable media or similar problems. */ +#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866) +/** Too many instances of a device. */ +#define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867) +/** Too many instances of a driver. */ +#define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868) +/** Too many instances of a usb device. */ +#define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869) +/** The device instance structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870) +/** The device helper structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DEVHLP_VERSION_MISMATCH (-2871) +/** The USB device instance structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_USBINS_VERSION_MISMATCH (-2872) +/** The USB device helper structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873) +/** The driver instance structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874) +/** The driver helper structure version has changed. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875) +/** Generic device structure version mismatch. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876) +/** Generic USB device structure version mismatch. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877) +/** Generic driver structure version mismatch. + * + * If you have upgraded VirtualBox recently, please make sure you have + * terminated all VMs and upgraded any extension packs. If this error + * persists, try re-installing VirtualBox. */ +#define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878) +/** PDMVMMDevHeapR3ToGCPhys failure. */ +#define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879) +/** A legacy device isn't implementing the HPET notification interface. */ +#define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880) +/** Internal processing error in the critical section code. */ +#define VERR_PDM_CRITSECT_IPE (-2881) +/** The critical section being deleted was not found. */ +#define VERR_PDM_CRITSECT_NOT_FOUND (-2882) +/** A PDMThread API was called by the wrong thread. */ +#define VERR_PDM_THREAD_INVALID_CALLER (-2883) +/** Internal processing error \#1 in the PDM Thread code. */ +#define VERR_PDM_THREAD_IPE_1 (-2884) +/** Internal processing error \#2 in the PDM Thread code. */ +#define VERR_PDM_THREAD_IPE_2 (-2885) +/** Only one PCI function is supported per PDM device. */ +#define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886) +/** Bad PCI configuration. */ +#define VERR_PDM_BAD_PCI_CONFIG (-2887) +/** Internal processing error # in the PDM device code. */ +#define VERR_PDM_DEV_IPE_1 (-2888) +/** Misconfigured driver chain transformation. */ +#define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889) +/** The driver is already removed, not more transformations possible (at + * present). */ +#define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890) +/** The PCI device isn't configured as a busmaster, physical memory access + * rejected. */ +#define VERR_PDM_NOT_PCI_BUS_MASTER (-2891) +/** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */ +#define VERR_PDM_HM_IPE (-2892) +/** The I/O request was canceled. */ +#define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893) +/** There is not enough room to store the data. */ +#define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894) +/** There is not enough data to satisfy the request. */ +#define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895) +/** The I/O request ID is already existing. */ +#define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896) +/** The I/O request ID was not found. */ +#define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897) +/** The I/O request is in progress. */ +#define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898 +/** The I/O request is in an invalid state for this operation. */ +#define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899) + +/** Returned by PCI config space callbacks to indicate taking default action. */ +#define VINF_PDM_PCI_DO_DEFAULT (7200) +/** @} */ + + +/** @name Host-Guest Communication Manager (HGCM) Status Codes + * @{ + */ +/** Requested service does not exist. */ +#define VERR_HGCM_SERVICE_NOT_FOUND (-2900) +/** Service rejected client connection */ +#define VINF_HGCM_CLIENT_REJECTED 2901 +/** Command address is invalid. */ +#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902) +/** Service will execute the command in background. */ +#define VINF_HGCM_ASYNC_EXECUTE 2903 +/** HGCM could not perform requested operation because of an internal error. */ +#define VERR_HGCM_INTERNAL (-2904) +/** Invalid HGCM client id. */ +#define VERR_HGCM_INVALID_CLIENT_ID (-2905) +/** The HGCM is saving state. */ +#define VINF_HGCM_SAVE_STATE (2906) +/** Requested service already exists. */ +#define VERR_HGCM_SERVICE_EXISTS (-2907) + +/** @} */ + + +/** @name Network Address Translation Driver (DrvNAT) Status Codes + * @{ + */ +/** Failed to convert the specified Guest IP to a binary IP address. + * Malformed input. */ +#define VERR_NAT_REDIR_GUEST_IP (-3001) +/** Failed while setting up a redirector rule. + * There probably is a conflict between the rule and some existing + * service on the computer. */ +#define VERR_NAT_REDIR_SETUP (-3002) +/** @} */ + + +/** @name HostIF Driver (DrvTUN) Status Codes + * @{ + */ +/** The Host Interface Networking init program failed. */ +#define VERR_HOSTIF_INIT_FAILED (-3100) +/** The Host Interface Networking device name is too long. */ +#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101) +/** The Host Interface Networking name config IOCTL call failed. */ +#define VERR_HOSTIF_IOCTL (-3102) +/** Failed to make the Host Interface Networking handle non-blocking. */ +#define VERR_HOSTIF_BLOCKING (-3103) +/** If a Host Interface Networking filehandle was specified it's not allowed to + * have any init or term programs. */ +#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104) +/** The Host Interface Networking terminate program failed. */ +#define VERR_HOSTIF_TERM_FAILED (-3105) +/** @} */ + + +/** @name VBox HDD Container (VD) Status Codes + * @{ + */ +/** Invalid image type. */ +#define VERR_VD_INVALID_TYPE (-3200) +/** Operation can't be done in current HDD container state. */ +#define VERR_VD_INVALID_STATE (-3201) +/** Configuration value not found. */ +#define VERR_VD_VALUE_NOT_FOUND (-3202) +/** Virtual HDD is not opened. */ +#define VERR_VD_NOT_OPENED (-3203) +/** Requested image is not opened. */ +#define VERR_VD_IMAGE_NOT_FOUND (-3204) +/** Image is read-only. */ +#define VERR_VD_IMAGE_READ_ONLY (-3205) +/** Geometry hasn't been set. */ +#define VERR_VD_GEOMETRY_NOT_SET (-3206) +/** No data for this block in image. */ +#define VERR_VD_BLOCK_FREE (-3207) +/** Differencing and parent images can't be used together due to UUID. */ +#define VERR_VD_UUID_MISMATCH (-3208) +/** Asynchronous I/O request finished. */ +#define VINF_VD_ASYNC_IO_FINISHED 3209 +/** Asynchronous I/O is not finished yet. */ +#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210) +/** The image is too small or too large for this format. */ +#define VERR_VD_INVALID_SIZE (-3211) +/** Configuration value is unknown. This indicates misconfiguration. */ +#define VERR_VD_UNKNOWN_CFG_VALUES (-3212) +/** Interface is unknown. This indicates misconfiguration. */ +#define VERR_VD_UNKNOWN_INTERFACE (-3213) +/** The DEK for disk encryption is missing. */ +#define VERR_VD_DEK_MISSING (-3214) +/** The provided password to decrypt the DEK was incorrect. */ +#define VERR_VD_PASSWORD_INCORRECT (-3215) +/** Generic: Invalid image file header. Use this for plugins. */ +#define VERR_VD_GEN_INVALID_HEADER (-3220) +/** VDI: Invalid image file header. */ +#define VERR_VD_VDI_INVALID_HEADER (-3230) +/** VDI: Invalid image file header: invalid signature. */ +#define VERR_VD_VDI_INVALID_SIGNATURE (-3231) +/** VDI: Invalid image file header: invalid version. */ +#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232) +/** Comment string is too long. */ +#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233) +/** VMDK: Invalid image file header. */ +#define VERR_VD_VMDK_INVALID_HEADER (-3240) +/** VMDK: Invalid image file header: invalid version. */ +#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241) +/** VMDK: Image property not found. */ +#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242) +/** VMDK: Operation can't be done in current image state. */ +#define VERR_VD_VMDK_INVALID_STATE (-3243) +/** VMDK: Format is invalid/inconsistent. */ +#define VERR_VD_VMDK_INVALID_FORMAT (-3244) +/** VMDK: Invalid write position. */ +#define VERR_VD_VMDK_INVALID_WRITE (-3245) +/** iSCSI: Invalid header, i.e. dummy for validity check. */ +#define VERR_VD_ISCSI_INVALID_HEADER (-3250) +/** iSCSI: Operation can't be done in current image state. */ +#define VERR_VD_ISCSI_INVALID_STATE (-3251) +/** iSCSI: Invalid device type (not a disk). */ +#define VERR_VD_ISCSI_INVALID_TYPE (-3252) +/** iSCSI: Initiator secret not decrypted */ +#define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253) +/** VHD: Invalid image file header. */ +#define VERR_VD_VHD_INVALID_HEADER (-3260) +/** Parallels HDD: Invalid image file header. */ +#define VERR_VD_PARALLELS_INVALID_HEADER (-3265) +/** DMG: Invalid image file header. */ +#define VERR_VD_DMG_INVALID_HEADER (-3267) +/** Raw: Invalid image file header. */ +#define VERR_VD_RAW_INVALID_HEADER (-3270) +/** Raw: Invalid image file type. */ +#define VERR_VD_RAW_INVALID_TYPE (-3271) +/** The backend needs more metadata before it can continue. */ +#define VERR_VD_NOT_ENOUGH_METADATA (-3272) +/** Halt the current I/O context until further notification from the backend. */ +#define VERR_VD_IOCTX_HALT (-3273) +/** The disk has a cache attached already. */ +#define VERR_VD_CACHE_ALREADY_EXISTS (-3274) +/** There is no cache attached to the disk. */ +#define VERR_VD_CACHE_NOT_FOUND (-3275) +/** The cache is not up to date with the image. */ +#define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276) +/** The given range does not meet the required alignment. */ +#define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277) +/** The discard operation is not supported for this image. */ +#define VERR_VD_DISCARD_NOT_SUPPORTED (-3278) +/** The image is the correct format but is corrupted. */ +#define VERR_VD_IMAGE_CORRUPTED (-3279) +/** Repairing the image is not supported. */ +#define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280) +/** Repairing the image is not possible because the corruption is to severe. */ +#define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281) +/** Reading from the image was not possible because the offset is out of the image range. + * This usually indicates that there is a minor corruption in the image meta data. */ +#define VERR_VD_READ_OUT_OF_RANGE (-3282) +/** Block read was marked as free in the image and returned as a zero block. */ +#define VINF_VD_NEW_ZEROED_BLOCK 3283 +/** Unable to parse the XML in DMG file. */ +#define VERR_VD_DMG_XML_PARSE_ERROR (-3284) +/** Unable to locate a usable DMG file within the XAR archive. */ +#define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285) +/** The size of the raw image is not dividable by 512 */ +#define VERR_VD_RAW_SIZE_MODULO_512 (-3286) +/** The size of the raw image is not dividable by 2048 */ +#define VERR_VD_RAW_SIZE_MODULO_2048 (-3287) +/** The size of the raw optical image is too small (<= 32K) */ +#define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288) +/** The size of the raw floppy image is too big (>2.88MB) */ +#define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289) +/** Reducing the size is not supported */ +#define VERR_VD_SHRINK_NOT_SUPPORTED (-3290) +/** @} */ + + +/** @name VBox Guest Library (VBGL) Status Codes + * @{ + */ +/** Library was not initialized. */ +#define VERR_VBGL_NOT_INITIALIZED (-3300) +/** Virtual address was not allocated by the library. */ +#define VERR_VBGL_INVALID_ADDR (-3301) +/** IOCtl to VBoxGuest driver failed. */ +#define VERR_VBGL_IOCTL_FAILED (-3302) +/** @} */ + + +/** @name VBox USB (VUSB) Status Codes + * @{ + */ +/** No available ports on the hub. + * This error is returned when a device is attempted created and/or attached + * to a hub which is out of ports. */ +#define VERR_VUSB_NO_PORTS (-3400) +/** The requested operation cannot be performed on a detached USB device. */ +#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401) +/** Failed to allocate memory for a URB. */ +#define VERR_VUSB_NO_URB_MEMORY (-3402) +/** General failure during URB queuing. + * This will go away when the queueing gets proper status code handling. */ +#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403) +/** Device creation failed because the USB device name was not found. */ +#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404) +/** Not permitted to open the USB device. + * The user doesn't have access to the device in the usbfs, check the mount options. */ +#define VERR_VUSB_USBFS_PERMISSION (-3405) +/** The requested operation cannot be performed because the device + * is currently being reset. */ +#define VERR_VUSB_DEVICE_IS_RESETTING (-3406) +/** The requested operation cannot be performed because the device + * is currently suspended. */ +#define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407) +/** Not permitted to open the USB device. + * The user doesn't have access to the device node, check group memberships. */ +#define VERR_VUSB_USB_DEVICE_PERMISSION (-3408) +/** @} */ + + +/** @name VBox VGA Status Codes + * @{ + */ +/** One of the custom modes was incorrect. + * The format or bit count of the custom mode value is invalid. */ +#define VERR_VGA_INVALID_CUSTOM_MODE (-3500) +/** The display connector is resizing. */ +#define VINF_VGA_RESIZE_IN_PROGRESS (3501) +/** Unexpected PCI region change during VGA saved state loading. */ +#define VERR_VGA_UNEXPECTED_PCI_REGION_LOAD_CHANGE (-3502) +/** Unabled to locate or load the OpenGL library. */ +#define VERR_VGA_GL_LOAD_FAILURE (-3503) +/** Unabled to locate an OpenGL symbol. */ +#define VERR_VGA_GL_SYMBOL_NOT_FOUND (-3504) +/** @} */ + + +/** @name Internal Networking Status Codes + * @{ + */ +/** The networking interface to filter was not found. */ +#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600) +/** The networking interface to filter was busy (used by someone). */ +#define VERR_INTNET_FLT_IF_BUSY (-3601) +/** Failed to create or connect to a networking interface filter. */ +#define VERR_INTNET_FLT_IF_FAILED (-3602) +/** The network already exists with a different trunk configuration. */ +#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603) +/** The network already exists with a different security profile (restricted / public). */ +#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604) +/** Failed to create a virtual network interface instance. */ +#define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605) +/** Failed to retrieve a virtual network interface link ID. */ +#define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606) +/** Failed to initialize a virtual network interface instance. */ +#define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607) +/** Failed to open a virtual network interface instance. */ +#define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608) +/** Failed to retrieve underlying (lower mac) link. */ +#define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609) +/** Failed to open underlying link instance. */ +#define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610) +/** Failed to get underlying link ID. */ +#define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611) +/** @} */ + + +/** @name Support Driver Status Codes + * @{ + */ +/** The component factory was not found. */ +#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) +/** The component factories do not support the requested interface. */ +#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701) +/** The service module was not found. */ +#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702) +/** The host kernel is too old. */ +#define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703) +/** Bad VTG magic value. */ +#define VERR_SUPDRV_VTG_MAGIC (-3704) +/** Bad VTG bit count value. */ +#define VERR_SUPDRV_VTG_BITS (-3705) +/** Bad VTG header - misc. */ +#define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706) +/** Bad VTG header - offset. */ +#define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707) +/** Bad VTG header - offset. */ +#define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708) +/** Bad VTG header - to low value. */ +#define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709) +/** Bad VTG header - to high value. */ +#define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710) +/** Bad VTG header - size value is not a multiple of the structure size. */ +#define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711) +/** Bad VTG string table offset. */ +#define VERR_SUPDRV_VTG_STRTAB_OFF (-3712) +/** Bad VTG string. */ +#define VERR_SUPDRV_VTG_BAD_STRING (-3713) +/** VTG string is too long. */ +#define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714) +/** Bad VTG attribute value. */ +#define VERR_SUPDRV_VTG_BAD_ATTR (-3715) +/** Bad VTG provider descriptor. */ +#define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716) +/** Bad VTG probe descriptor. */ +#define VERR_SUPDRV_VTG_BAD_PROBE (-3717) +/** Bad VTG argument list descriptor. */ +#define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718) +/** Bad VTG probe enabled data. */ +#define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719) +/** Bad VTG probe location record. */ +#define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720) +/** The VTG object for the session or image has already been registered. */ +#define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721) +/** A driver may only register one VTG object per session. */ +#define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722) +/** A tracer has already been registered. */ +#define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723) +/** The session has no tracer associated with it. */ +#define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724) +/** The tracer has already been opened in this sesssion. */ +#define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725) +/** The tracer has not been opened. */ +#define VERR_SUPDRV_TRACER_NOT_OPENED (-3726) +/** There is no tracer present. */ +#define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727) +/** The tracer is unloading. */ +#define VERR_SUPDRV_TRACER_UNLOADING (-3728) +/** Another thread in the session is talking to the tracer. */ +#define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729) +/** The tracer cannot open it self in the same session. */ +#define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730) +/** Bad argument flags. */ +#define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731) +/** The session has reached the max number of (user mode) providers. */ +#define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732) +/** The tracepoint provider object is too large. */ +#define VERR_SUPDRV_TRACER_TOO_LARGE (-3733) +/** The probe location array isn't adjacent to the probe enable array. */ +#define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734) +/** The user mode tracepoint provider has too many probe locations and + * probes. */ +#define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735) +/** The user mode tracepoint provider string table is too large. */ +#define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736) +/** The user mode tracepoint provider string table offset is bad. */ +#define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737) +/** The VM process was denied access to vboxdrv because someone have managed to + * open the process or its main thread with too broad access rights. */ +#define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738) +/** Error opening the ApiPort LPC object. */ +#define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739) +/** Error enumerating all processes in the session. */ +#define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740) +/** The CSRSS instance associated with the client process could not be + * located. */ +#define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741) +/** Type error opening the ApiPort LPC object. */ +#define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742) +/** Failed to measure the TSC delta between two CPUs. */ +#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743) +/** Failed to calculate the TSC frequency. */ +#define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744) +/** Failed to get the delta-adjusted TSC value. */ +#define VERR_SUPDRV_TSC_READ_FAILED (-3745) +/** Failed to measure the TSC delta between two CPUs, continue without any + * TSC-delta. */ +#define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746 +/** A TSC-delta measurement request is currently being serviced. */ +#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747) +/** The process trying to open VBoxDrv is not a budding VM process (1). */ +#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748) +/** The process trying to open VBoxDrv is not a budding VM process (2). */ +#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749) + +/** Raw-mode is unavailable courtesy of Hyper-V. */ +#define VERR_SUPDRV_NO_RAW_MODE_HYPER_V_ROOT (-7000) +/** @} */ + + +/** @name Support Library Status Codes + * @{ + */ +/** The specified path was not absolute (hardening). */ +#define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750) +/** The specified path was not clean (hardening). */ +#define VERR_SUPLIB_PATH_NOT_CLEAN (-3751) +/** The specified path is too long (hardening). */ +#define VERR_SUPLIB_PATH_TOO_LONG (-3752) +/** The specified path is too short (hardening). */ +#define VERR_SUPLIB_PATH_TOO_SHORT (-3753) +/** The specified path has too many components (hardening). */ +#define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754) +/** The specified path is a root path (hardening). */ +#define VERR_SUPLIB_PATH_IS_ROOT (-3755) +/** Failed to enumerate directory (hardening). */ +#define VERR_SUPLIB_DIR_ENUM_FAILED (-3756) +/** Failed to stat a file/dir during enumeration (hardening). */ +#define VERR_SUPLIB_STAT_ENUM_FAILED (-3757) +/** Failed to stat a file/dir (hardening). */ +#define VERR_SUPLIB_STAT_FAILED (-3758) +/** Failed to fstat a native handle (hardening). */ +#define VERR_SUPLIB_FSTAT_FAILED (-3759) +/** Found an illegal symbolic link (hardening). */ +#define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760) +/** Found something which isn't a file nor a directory (hardening). */ +#define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761) +/** The specified path is a directory and not a file (hardening). */ +#define VERR_SUPLIB_IS_DIRECTORY (-3762) +/** The specified path is a file and not a directory (hardening). */ +#define VERR_SUPLIB_IS_FILE (-3763) +/** The path is not the same object as the native handle (hardening). */ +#define VERR_SUPLIB_NOT_SAME_OBJECT (-3764) +/** The owner is not root (hardening). */ +#define VERR_SUPLIB_OWNER_NOT_ROOT (-3765) +/** The group is a non-system group and it has write access (hardening). */ +#define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766) +/** The file or directory is world writable (hardening). */ +#define VERR_SUPLIB_WORLD_WRITABLE (-3767) +/** The argv[0] of an internal application does not match the executable image + * path (hardening). */ +#define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768) +/** The internal application does not reside in the correct place (hardening). */ +#define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769) +/** Unable to establish trusted of VM process (0). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770) +/** Unable to establish trusted of VM process (1). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771) +/** Unable to establish trusted of VM process (2). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772) +/** Unable to establish trusted of VM process (3). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773) +/** Unable to establish trusted of VM process (4). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774) +/** Unable to establish trusted of VM process (5). */ +#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775) +/** Unable to make text memory writeable (hardening). */ +#define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776) +/** Unable to seal text memory again to protect against write access (hardening). */ +#define VERR_SUPLIB_TEXT_NOT_SEALED (-3777) +/** Unexpected instruction encountered for which there is no patch strategy + * implemented (hardening). */ +#define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778) +/** @} */ + + +/** @name VBox GMM Status Codes + * @{ + */ +/** The GMM is out of pages and needs to be give another chunk of user memory that + * it can lock down and borrow pages from. */ +#define VERR_GMM_SEED_ME (-3800) +/** Unable to allocate more pages from the host system. */ +#define VERR_GMM_OUT_OF_MEMORY (-3801) +/** Hit the global allocation limit. + * If you know there is still sufficient memory available, try raising the limit. */ +#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802) +/** Hit the a VM account limit. */ +#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803) +/** Attempt to free more memory than what was previously allocated. */ +#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804) +/** Attempted to report too many pages as deflated. */ +#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805) +/** The page to be freed or updated was not found. */ +#define VERR_GMM_PAGE_NOT_FOUND (-3806) +/** The specified shared page was not actually private. */ +#define VERR_GMM_PAGE_NOT_PRIVATE (-3807) +/** The specified shared page was not actually shared. */ +#define VERR_GMM_PAGE_NOT_SHARED (-3808) +/** The page to be freed was already freed. */ +#define VERR_GMM_PAGE_ALREADY_FREE (-3809) +/** The page to be updated or freed was noted owned by the caller. */ +#define VERR_GMM_NOT_PAGE_OWNER (-3810) +/** The specified chunk was not found. */ +#define VERR_GMM_CHUNK_NOT_FOUND (-3811) +/** The chunk has already been mapped into the process. */ +#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812) +/** The chunk to be unmapped isn't actually mapped into the process. */ +#define VERR_GMM_CHUNK_NOT_MAPPED (-3813) +/** The chunk has been mapped too many times already (impossible). */ +#define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814) +/** The reservation or reservation update was declined - too many VMs, too + * little memory, and/or too low GMM configuration. */ +#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815) +/** A GMM sanity check failed. */ +#define VERR_GMM_IS_NOT_SANE (-3816) +/** Inserting a new chunk failed. */ +#define VERR_GMM_CHUNK_INSERT (-3817) +/** Failed to obtain the GMM instance. */ +#define VERR_GMM_INSTANCE (-3818) +/** Bad mutex semaphore flags. */ +#define VERR_GMM_MTX_FLAGS (-3819) +/** Internal processing error in the page allocator. */ +#define VERR_GMM_ALLOC_PAGES_IPE (-3820) +/** Invalid page count given to GMMR3FreePagesPerform. */ +#define VERR_GMM_ACTUAL_PAGES_IPE (-3821) +/** The shared module name is too long. */ +#define VERR_GMM_MODULE_NAME_TOO_LONG (-3822) +/** The shared module version string is too long. */ +#define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823) +/** The shared module has too many regions. */ +#define VERR_GMM_TOO_MANY_REGIONS (-3824) +/** The guest has reported too many modules. */ +#define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825) +/** The guest has reported too many modules. */ +#define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826) +/** The shared module is already registered. */ +#define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827) +/** The shared module clashed address wise with a previously registered + * module. */ +#define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828) +/** The shared module was not found. */ +#define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829) +/** The size of the shared module was out of range. */ +#define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830) +/** The size of the one or more regions in the shared module was out of + * range. */ +#define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831) +/** @} */ + + +/** @name VBox GVM Status Codes + * @{ + */ +/** The GVM is out of VM handle space. */ +#define VERR_GVM_TOO_MANY_VMS (-3900) +/** The EMT was not blocked at the time of the call. */ +#define VINF_GVM_NOT_BLOCKED 3901 +/** The EMT was not busy running guest code at the time of the call. */ +#define VINF_GVM_NOT_BUSY_IN_GC 3902 +/** RTThreadYield was called during a GVMMR0SchedPoll call. */ +#define VINF_GVM_YIELDED 3903 +/** @} */ + + +/** @name VBox VMX Status Codes + * @{ + */ +/** VMXON failed; possibly because it was already run before. */ +#define VERR_VMX_VMXON_FAILED (-4000) +/** Invalid VMCS pointer. + * (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */ +#define VERR_VMX_INVALID_VMCS_PTR (-4001) +/** Invalid VMCS index or write to read-only element. */ +#define VERR_VMX_INVALID_VMCS_FIELD (-4002) +/** Reserved for future status code that we wish to OR with + * VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */ +#define VERR_VMX_RESERVED (-4003) +/** Invalid VMXON pointer. */ +#define VERR_VMX_INVALID_VMXON_PTR (-4004) +/** Unable to start VM execution. */ +#define VERR_VMX_UNABLE_TO_START_VM (-4005) +/** Unable to switch due to invalid host state. */ +#define VERR_VMX_INVALID_HOST_STATE (-4006) +/** VMX CPU extension not available in hardware. */ +#define VERR_VMX_NO_VMX (-4009) +/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */ +#define VERR_VMX_IN_VMX_ROOT_MODE (-4011) +/** Somebody cleared X86_CR4_VMXE in the CR4 register. */ +#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012) +/** Failed to enable and lock VT-x features. */ +#define VERR_VMX_MSR_LOCKING_FAILED (-4013) +/** Unable to switch due to invalid guest state. */ +#define VERR_VMX_INVALID_GUEST_STATE (-4014) +/** Unexpected VM exit. */ +#define VERR_VMX_UNEXPECTED_EXIT (-4015) +/** Unexpected VM exception. */ +#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016) +/** Unexpected interruption exit type. */ +#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017) +/** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */ +#define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018) +/** Undefined VM exit code. */ +#define VERR_VMX_UNDEFINED_EXIT_CODE (-4019) +/** VMPTRLD failed; possibly because of invalid VMCS launch-state. */ +#define VERR_VMX_VMPTRLD_FAILED (-4021) +/** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */ +#define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022) +/** Internal VMX processing error no 1. */ +#define VERR_VMX_IPE_1 (-4023) +/** Internal VMX processing error no 2. */ +#define VERR_VMX_IPE_2 (-4024) +/** Internal VMX processing error no 3. */ +#define VERR_VMX_IPE_3 (-4025) +/** Internal VMX processing error no 4. */ +#define VERR_VMX_IPE_4 (-4026) +/** Internal VMX processing error no 5. */ +#define VERR_VMX_IPE_5 (-4027) +/** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */ +#define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028) +/** VT-x features disabled by the BIOS. */ +#define VERR_VMX_MSR_VMX_DISABLED (-4029) +/** VT-x VMCS field cache invalid. */ +#define VERR_VMX_VMCS_FIELD_CACHE_INVALID (-4030) +/** Failed to set VMXON enable bit while enabling VT-x through the MSR. */ +#define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4031) +/** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */ +#define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4032) +/** An operation caused a nested-guest VM-exit. */ +#define VINF_VMX_VMEXIT 4033 +/** Generic VM-entry failure. */ +#define VERR_VMX_VMENTRY_FAILED (-4033) +/** Generic VM-exit failure. */ +#define VERR_VMX_VMEXIT_FAILED (-4034) +/** The requested nested-guest VMX intercept is not active or not in + * nested-guest execution mode. */ +#define VINF_VMX_INTERCEPT_NOT_ACTIVE 4035 +/** The behavior of the instruction/operation is modified/needs modification + * in VMX non-root mode. */ +#define VINF_VMX_MODIFIES_BEHAVIOR 4036 +/** VMLAUNCH/VMRESUME succeeded, can enter nested-guest execution. */ +#define VINF_VMX_VMLAUNCH_VMRESUME 4037 +/** VT-x VMCS launch state invalid. */ +#define VERR_VMX_INVALID_VMCS_LAUNCH_STATE (-4038) +/** @} */ + + +/** @name VBox SVM Status Codes + * @{ + */ +/** Unable to start VM execution. */ +#define VERR_SVM_UNABLE_TO_START_VM (-4050) +/** AMD-V bit not set in K6_EFER MSR */ +#define VERR_SVM_ILLEGAL_EFER_MSR (-4051) +/** AMD-V CPU extension not available. */ +#define VERR_SVM_NO_SVM (-4052) +/** AMD-V CPU extension disabled (by BIOS). */ +#define VERR_SVM_DISABLED (-4053) +/** AMD-V CPU extension in-use. */ +#define VERR_SVM_IN_USE (-4054) +/** Invalid pVMCB. */ +#define VERR_SVM_INVALID_PVMCB (-4055) +/** Unexpected SVM exit. */ +#define VERR_SVM_UNEXPECTED_EXIT (-4056) +/** Unexpected SVM exception exit. */ +#define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057) +/** Unexpected SVM patch type. */ +#define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058) +/** Unable to start VM execution due to an invalid guest state. */ +#define VERR_SVM_INVALID_GUEST_STATE (-4059) +/** Unknown or unrecognized SVM exit. */ +#define VERR_SVM_UNKNOWN_EXIT (-4060) +/** Internal SVM processing error no 1. */ +#define VERR_SVM_IPE_1 (-4061) +/** Internal SVM processing error no 2. */ +#define VERR_SVM_IPE_2 (-4062) +/** Internal SVM processing error no 3. */ +#define VERR_SVM_IPE_3 (-4063) +/** Internal SVM processing error no 4. */ +#define VERR_SVM_IPE_4 (-4064) +/** Internal SVM processing error no 5. */ +#define VERR_SVM_IPE_5 (-4065) +/** The nested-guest \#VMEXIT processing failed, initiate shutdown. */ +#define VERR_SVM_VMEXIT_FAILED (-4066) +/** An operation caused a nested-guest SVM \#VMEXIT. */ +#define VINF_SVM_VMEXIT 4067 +/** VMRUN emulation succeeded, ready to immediately enter the nested-guest. */ +#define VINF_SVM_VMRUN 4068 +/** The requested nested-guest SVM intercept is not active or not in + * nested-guest execution mode. */ +#define VINF_SVM_INTERCEPT_NOT_ACTIVE 4069 +/** @} */ + + +/** @name VBox HM Status Codes + * @{ + */ +/** Host is about to go into suspend mode. */ +#define VERR_HM_SUSPEND_PENDING (-4100) +/** Conflicting CFGM values. */ +#define VERR_HM_CONFIG_MISMATCH (-4103) +/** Internal processing error in the HM init code. */ +#define VERR_HM_ALREADY_ENABLED_IPE (-4104) +/** Unexpected MSR in the auto-load/store area. */ +#define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105) +/** No 32-bit to 64-bit switcher in place. */ +#define VERR_HM_NO_32_TO_64_SWITCHER (-4106) +/** HMR0Leave was called on the wrong CPU. */ +#define VERR_HM_WRONG_CPU (-4107) +/** Internal processing error \#1 in the HM code. */ +#define VERR_HM_IPE_1 (-4108) +/** Internal processing error \#2 in the HM code. */ +#define VERR_HM_IPE_2 (-4109) +/** Wrong 32/64-bit switcher. */ +#define VERR_HM_WRONG_SWITCHER (-4110) +/** Unknown I/O instruction. */ +#define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111) +/** Unsupported CPU feature combination. */ +#define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112) +/** Internal processing error \#3 in the HM code. */ +#define VERR_HM_IPE_3 (-4113) +/** Internal processing error \#4 in the HM code. */ +#define VERR_HM_IPE_4 (-4114) +/** Internal processing error \#5 in the HM code. */ +#define VERR_HM_IPE_5 (-4115) +/** Invalid HM64ON32OP value. */ +#define VERR_HM_INVALID_HM64ON32OP (-4116) +/** Resume guest execution after injecting a double-fault. */ +#define VINF_HM_DOUBLE_FAULT 4117 +/** Pending exception; continue guest execution. */ +#define VINF_HM_PENDING_XCPT 4118 +/** @} */ + + +/** @name VBox Disassembler Status Codes + * @{ + */ +/** Invalid opcode byte(s) */ +#define VERR_DIS_INVALID_OPCODE (-4200) +/** Generic failure during disassembly. */ +#define VERR_DIS_GEN_FAILURE (-4201) +/** No read callback. */ +#define VERR_DIS_NO_READ_CALLBACK (-4202) +/** Invalid Mod/RM. */ +#define VERR_DIS_INVALID_MODRM (-4203) +/** Invalid parameter index. */ +#define VERR_DIS_INVALID_PARAMETER (-4204) +/** The instruction is too long. */ +#define VERR_DIS_TOO_LONG_INSTR (-4206) +/** @} */ + + +/** @name VBox Webservice Status Codes + * @{ + */ +/** Authentication failed (ISessionManager::logon()) */ +#define VERR_WEB_NOT_AUTHENTICATED (-4300) +/** Invalid format of managed object reference */ +#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301) +/** Invalid session ID in managed object reference */ +#define VERR_WEB_INVALID_SESSION_ID (-4302) +/** Invalid object ID in managed object reference */ +#define VERR_WEB_INVALID_OBJECT_ID (-4303) +/** Unsupported interface for managed object reference */ +#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304) +/** @} */ + + +/** @name VBox PARAV Status Codes + * @{ + */ +/** Switch back to host */ +#define VINF_PARAV_SWITCH_TO_HOST 4400 + +/** @} */ + +/** @name VBox Video HW Acceleration command status + * @{ + */ +/** command processing is pending, a completion handler will be called */ +#define VINF_VHWA_CMD_PENDING 4500 + +/** @} */ + + +/** @name VBox COM error codes + * + * @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses + * these for conversion that is lossless with respect to important COM + * status codes. These methods should be moved to the glue library. + * @{ */ +/** Unexpected turn of events. */ +#define VERR_COM_UNEXPECTED (-4600) +/** The base of the VirtualBox COM status codes (the lower value) + * corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */ +#define VERR_COM_VBOX_LOWEST (-4699) +/** Object corresponding to the supplied arguments does not exist. */ +#define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1) +/** Current virtual machine state prevents the operation. */ +#define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2) +/** Virtual machine error occurred attempting the operation. */ +#define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3) +/** File not accessible or erroneous file contents. */ +#define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4) +/** IPRT error. */ +#define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5) +/** Pluggable Device Manager error. */ +#define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6) +/** Current object state prohibits operation. */ +#define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7) +/** Host operating system related error. */ +#define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8) +/** Requested operation is not supported. */ +#define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9) +/** Invalid XML found. */ +#define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10) +/** Current session state prohibits operation. */ +#define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11) +/** Object being in use prohibits operation. */ +#define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12) +/** Returned by callback methods which does not need to be called + * again because the client does not actually make use of them. */ +#define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13) +/** @} */ + +/** @name VBox VMMDev Status codes + * @{ + */ +/** CPU hotplug events from VMMDev are not monitored by the guest. */ +#define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700) +/** @} */ + +/** @name VBox async I/O manager Status Codes + * @{ + */ +/** Async I/O task is pending, a completion handler will be called. */ +#define VINF_AIO_TASK_PENDING 4800 +/** @} */ + +/** @name VBox Virtual SCSI Status Codes + * @{ + */ +/** LUN type is not supported. */ +#define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900) +/** LUN is already/still attached to a device. */ +#define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901) +/** The specified LUN is invalid. */ +#define VERR_VSCSI_LUN_INVALID (-4902) +/** The LUN is not attached to the device. */ +#define VERR_VSCSI_LUN_NOT_ATTACHED (-4903) +/** The LUN is still busy. */ +#define VERR_VSCSI_LUN_BUSY (-4904) +/** @} */ + +/** @name VBox FAM Status Codes + * @{ + */ +/** FAM failed to open a connection. */ +#define VERR_FAM_OPEN_FAILED (-5000) +/** FAM failed to add a file to the list to be monitored. */ +#define VERR_FAM_MONITOR_FILE_FAILED (-5001) +/** FAM failed to add a directory to the list to be monitored. */ +#define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002) +/** The connection to the FAM daemon was lost. */ +#define VERR_FAM_CONNECTION_LOST (-5003) +/** @} */ + + +/** @name PCI Bus & Passthrough Status Codes + * @{ + */ +/** RamPreAlloc not set. + * RAM pre-allocation is currently a requirement for PCI passthrough. */ +#define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100) +/** VT-x/AMD-V not active. + * PCI passthrough currently works only if VT-x/AMD-V is active. */ +#define VERR_PCI_PASSTHROUGH_NO_HM (-5101) +/** Nested paging not active. + * PCI passthrough currently works only if nested paging is active. */ +#define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102) + +/** Special return code from a PCI I/O region mapping handler that tells the BUS + * that it has done the mapping already. */ +#define VINF_PCI_MAPPING_DONE 5150 +/** @} */ + + +/** @name GVMM Status Codes + * @{ + */ +/** Internal error obtaining the GVMM instance. */ +#define VERR_GVMM_INSTANCE (-5200) +/** GVMM does not support the range of CPUs present/possible on the host. */ +#define VERR_GVMM_HOST_CPU_RANGE (-5201) +/** GVMM ran into some broken IPRT code. */ +#define VERR_GVMM_BROKEN_IPRT (-5202) +/** Internal processing error \#1 in the GVMM code. */ +#define VERR_GVMM_IPE_1 (-5203) +/** Internal processing error \#2 in the GVMM code. */ +#define VERR_GVMM_IPE_2 (-5204) +/** Cannot destroy VM because not all other EMTs have deregistered. */ +#define VERR_GVMM_NOT_ALL_EMTS_DEREGISTERED (-5205) +/** @} */ + + +/** @name IEM Status Codes + * @{ */ +/** The instruction is not yet implemented by IEM. */ +#define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300) +/** Invalid operand size passed to an IEM function. */ +#define VERR_IEM_INVALID_OPERAND_SIZE (-5301) +/** Invalid address mode passed to an IEM function. */ +#define VERR_IEM_INVALID_ADDRESS_MODE (-5302) +/** Invalid effective segment register number passed to an IEM function. */ +#define VERR_IEM_INVALID_EFF_SEG (-5303) +/** Invalid instruction length passed to an IEM function. */ +#define VERR_IEM_INVALID_INSTR_LENGTH (-5304) +/** Internal status code for indicating that a selector isn't valid (LAR, LSL, + * VERR, VERW). This is not used outside the instruction implementations. */ +#define VINF_IEM_SELECTOR_NOT_OK (5305) +/** Restart the current instruction. For testing only. */ +#define VERR_IEM_RESTART_INSTRUCTION (-5389) +/** This particular aspect of the instruction is not yet implemented by IEM. */ +#define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390) +/** Internal processing error \#1 in the IEM code. */ +#define VERR_IEM_IPE_1 (-5391) +/** Internal processing error \#2 in the IEM code. */ +#define VERR_IEM_IPE_2 (-5392) +/** Internal processing error \#3 in the IEM code. */ +#define VERR_IEM_IPE_3 (-5393) +/** Internal processing error \#4 in the IEM code. */ +#define VERR_IEM_IPE_4 (-5394) +/** Internal processing error \#5 in the IEM code. */ +#define VERR_IEM_IPE_5 (-5395) +/** Internal processing error \#6 in the IEM code. */ +#define VERR_IEM_IPE_6 (-5396) +/** Internal processing error \#7 in the IEM code. */ +#define VERR_IEM_IPE_7 (-5397) +/** Internal processing error \#8 in the IEM code. */ +#define VERR_IEM_IPE_8 (-5398) +/** Internal processing error \#9 in the IEM code. */ +#define VERR_IEM_IPE_9 (-5399) +/** @} */ + + +/** @name DBGC Status Codes + * @{ */ +/** Status that causes DBGC to quit. */ +#define VERR_DBGC_QUIT (-5400) +/** Async command pending. */ +#define VWRN_DBGC_CMD_PENDING 5401 +/** The command has already been registered. */ +#define VWRN_DBGC_ALREADY_REGISTERED 5402 +/** The command cannot be deregistered because has not been registered. */ +#define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403) +/** Unknown breakpoint. */ +#define VERR_DBGC_BP_NOT_FOUND (-5404) +/** The breakpoint already exists. */ +#define VERR_DBGC_BP_EXISTS (-5405) +/** The breakpoint has no command. */ +#define VINF_DBGC_BP_NO_COMMAND 5406 +/** Generic debugger command failure. */ +#define VERR_DBGC_COMMAND_FAILED (-5407) +/** Logic bug in the DBGC code. */ +#define VERR_DBGC_IPE (-5408) + +/** The lowest parse status code. */ +#define VERR_DBGC_PARSE_LOWEST (-5499) +/** Syntax error - too few arguments. */ +#define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0) +/** Syntax error - too many arguments. */ +#define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1) +/** Syntax error - too many arguments for static storage. */ +#define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2) +/** Syntax error - expected binary operator. */ +#define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3) + +/** Syntax error - the argument does not allow a range to be specified. */ +#define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5) +/** Syntax error - unbalanced quotes. */ +#define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6) +/** Syntax error - unbalanced parenthesis. */ +#define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7) +/** Syntax error - an argument or subargument contains nothing useful. */ +#define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8) +/** Syntax error - invalid operator usage. */ +#define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9) +/** Syntax error - invalid numeric value. */ +#define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10) +/** Syntax error - numeric overflow. */ +#define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11) +/** Syntax error - invalid operation attempted. */ +#define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12) +/** Syntax error - function not found. */ +#define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13) +/** Syntax error - the specified function is not a function. */ +#define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14) +/** Syntax error - out of scratch memory. */ +#define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15) +/** Syntax error - out of regular heap memory. */ +#define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16) +/** Syntax error - incorrect argument type. */ +#define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17) +/** Syntax error - an undefined variable was referenced. */ +#define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18) +/** Syntax error - a type conversion failed. */ +#define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19) +/** Syntax error - you hit a debugger feature which isn't implemented yet. + * (Feel free to help implement it.) */ +#define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20) +/** Syntax error - Couldn't satisfy a request for a specific result type. */ +#define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21) +/** Syntax error - Cannot read symbol value, it is a set-only symbol. */ +#define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22) +/** Syntax error - Invalid command name. */ +#define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23) +/** Syntax error - Command not found. */ +#define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24) +/** Syntax error - buggy parser. */ +#define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25) +/** @} */ + + +/** @name Support driver/library shared verification status codes. + * @{ */ +/** Process Verification Failure: The memory content does not match the image + * file. */ +#define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600) +/** Process Verification Failure: The memory protection of a image file section + * does not match what the section header prescribes. */ +#define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601) +/** Process Verification Failure: One of the section in the image file is not + * mapped into memory. */ +#define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602) +/** Process Verification Failure: One of the section in the image file is not + * fully mapped into memory. */ +#define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603) +/** Process Verification Failure: Bad file alignment value in image header. */ +#define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604) +/** Process Verification Failure: Bad image base in header. */ +#define VERR_SUP_VP_BAD_IMAGE_BASE (-5605) +/** Process Verification Failure: Bad image signature. */ +#define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606) +/** Process Verification Failure: Bad image size. */ +#define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607) +/** Process Verification Failure: Bad new-header offset in the MZ header. */ +#define VERR_SUP_VP_BAD_MZ_OFFSET (-5608) +/** Process Verification Failure: Bad optional header field. */ +#define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609) +/** Process Verification Failure: Bad section alignment value in image + * header. */ +#define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610) +/** Process Verification Failure: Bad section raw data size. */ +#define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611) +/** Process Verification Failure: Bad virtual section address. */ +#define VERR_SUP_VP_BAD_SECTION_RVA (-5612) +/** Process Verification Failure: Bad virtual section size. */ +#define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613) +/** Process Verification Failure: Bad size of image header. */ +#define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614) +/** Process Verification Failure: The process is being debugged. */ +#define VERR_SUP_VP_DEBUGGED (-5615) +/** Process Verification Failure: A DLL was found more than once. */ +#define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616) +/** Process Verification Failure: Image section region is too large. */ +#define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617) +/** Process Verification Failure: Executable file name and process image name + * does not match up. */ +#define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618) +/** Process Verification Failure: Found executable memory allocated in the + * process. There is only supposed be executable memory associated with + * image file mappings (DLLs & EXE). */ +#define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619) +/** Process Verification Failure: There is more than one known executable mapped + * into the process. */ +#define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620) +/** Process Verification Failure: Error closing image file handle. */ +#define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621) +/** Process Verification Failure: Error opening image file. */ +#define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622) +/** Process Verification Failure: Error reading image file header. */ +#define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623) +/** Process Verification Failure: Image mapping is bogus as the first region + * has different AllocationBase and BaseAddress values, indicating that a + * section was unmapped or otherwise tampered with. */ +#define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624) +/** Process Verification Failure: Error reading process memory for comparing + * with disk data. */ +#define VERR_SUP_VP_MEMORY_READ_ERROR (-5625) +/** Process Verification Failure: Found no executable mapped into the process + * address space. */ +#define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626) +/** Process Verification Failure: An image mapping failed to report a name. */ +#define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627) +/** Process Verification Failure: No KERNE32.DLL mapping found. This is + * impossible. */ +#define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628) +/** Process Verification Failure: Error allocating memory. */ +#define VERR_SUP_VP_NO_MEMORY (-5629) +/** Process Verification Failure: Error allocating state memory or querying + * the system32 path. */ +#define VERR_SUP_VP_NO_MEMORY_STATE (-5630) +/** Process Verification Failure: No NTDLL.DLL mapping found. This is + * impossible. */ +#define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631) +/** Process Verification Failure: A DLL residing outside System32 was found + * in the process. */ +#define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632) +/** Process Verification Failure: An unknown and unwanted DLL was found loaded + * into the process. */ +#define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633) +/** Process Verification Failure: The name of an image file changes between + * mapping regions. */ +#define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634) +/** Process Verification Failure: Error querying process name. */ +#define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635) +/** Process Verification Failure: Error querying thread information. */ +#define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636) +/** Process Verification Failure: Error query virtual memory information. */ +#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637) +/** Process Verification Failure: Error query virtual memory mapping name. */ +#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638) +/** Process Verification Failure: Error determining the full path of + * System32. */ +#define VERR_SUP_VP_SYSTEM32_PATH (-5639) +/** Process Verification Failure: The process has more than one thread. */ +#define VERR_SUP_VP_THREAD_NOT_ALONE (-5640) +/** Process Verification Failure: The image mapping is too large (>= 2GB). */ +#define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641) +/** Process Verification Failure: The memory region is too large (>= 2GB). */ +#define VERR_SUP_VP_TOO_LARGE_REGION (-5642) +/** Process Verification Failure: There are too many DLLs loaded. */ +#define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643) +/** Process Verification Failure: An image has too many regions. */ +#define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644) +/** Process Verification Failure: The process has too many virtual memory + * regions. */ +#define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645) +/** Process Verification Failure: An image has too many sections. */ +#define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646) +/** Process Verification Failure: An image is targeting an unexpected + * machine/CPU. */ +#define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647) +/** Process Verification Failure: Unexpected section protection flag + * combination. */ +#define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648) +/** Process Verification Failure: Expected the process and exe to have forced + * integrity checking enabled (verifying signatures). */ +#define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649) +/** Process Verification Failure: Expected the process and exe to have dynamic + * base enabled. */ +#define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650) +/** Process Verification Failure: Expected the process and exe to advertise + * NX compatibility. */ +#define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651) +/** Process Verification Failure: The DllCharacteristics of the process + * does not match the value in the optional header in the exe file. */ +#define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652) +/** Process Verification Failure: The ImageCharacteristics of the process + * does not match the value in the file header in the exe file. */ +#define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653) +/** Process Verification Failure: Error querying image information. */ +#define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654) +/** Process Verification Failure: Error querying debug port. */ +#define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655) +/** WinVerifyTrust failed with an unexpected status code when using the + * catalog-file approach. */ +#define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656) +/** The image is required to be signed with the same certificate as the rest + * of VirtualBox. */ +#define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657) +/** Internal processing error: Not build certificate. */ +#define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658) +/** The image requires to be signed using the kernel-code signing process. */ +#define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659) +/** Unexpected number of valid paths. */ +#define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660) +/** The image is required to force integrity checks. */ +#define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661) +/** Process Verification Failure: Symantec Endpoint Protection must be + * disabled for the VirtualBox VM processes. + * http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */ +#define VERR_SUP_VP_SYSFER_DLL (-5662) +/** Process Purification Failure: KERNE32.DLL already mapped into the initial + * process (suspended). */ +#define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663) +/** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of + * executable memory which shouldn't be present in the process. */ +#define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664) +/** Process Purification Failure: Both NtUnmapViewOfSetion and + * NtProtectVirtualMemory failed to get rid of or passify an non-image + * executable mapping. */ +#define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665) +/** Process Purification Failure: Unknown memory type of executable memory. */ +#define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666) +/** The image file is not owned by TrustedInstaller is it should be. */ +#define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667) +/** The image is outside the expected range. */ +#define VERR_SUP_VP_IMAGE_TOO_BIG (-5668) +/** Stub process not found so it cannot be revalidated when vboxdrv is opened + * by the VM process. */ +#define VERR_SUP_VP_STUB_NOT_FOUND (-5669) +/** Error opening the stub process for revalidation when vboxdrv is opened by + * the VM process. */ +#define VERR_SUP_VP_STUB_OPEN_ERROR (-5670) +/** Stub process thread not found during revalidation upon vboxdrv opening by + * the VM process. */ +#define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671) +/** Error opening the stub process thread for revalidation when vboxdrv is + * opened by the VM process. */ +#define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672) +/** Process Purification Failure: NtAllocateVirtualMemory failed to get us + * suitable replacement memory for a chunk of executable memory that + * shouldn't be present in our process. (You will only see this message if you + * got potentially fatally buggy anti-virus software installed.) */ +#define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673) +/** Error getting the file mode. */ +#define VERR_SUP_VP_FILE_MODE_ERROR (-5674) +/** Error creating an event semaphore for used with asynchronous reads. */ +#define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675) +/** Undesirable module. */ +#define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676) + +/** @} */ + +/** @name VBox Extension Pack Status Codes + * @{ + */ +/** The host is not supported. Uninstall the extension pack. + * Returned by the VBOXEXTPACKREG::pfnInstalled. */ +#define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000) +/** The VirtualBox version is not supported by one of the extension packs. + * + * You have probably upgraded VirtualBox recently. Please upgrade the + * extension packs to versions compatible with this VirtualBox release. + */ +#define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001) +/** @} */ + + +/** @name VBox Guest Control Status Codes + * @{ + */ +/** Guest side reported an error. */ +#define VERR_GSTCTL_GUEST_ERROR (-6200) +/** A guest control object has changed its overall status. */ +#define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220 +/** Guest process is in a wrong state. */ +#define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221) +/** Maximum (context ID) sessions have been reached. */ +#define VERR_GSTCTL_MAX_CID_SESSIONS_REACHED (-6222) +/** Maximum (context ID) objects have been reached. */ +#define VERR_GSTCTL_MAX_CID_OBJECTS_REACHED (-6223) +/** Maximum (context ID object) count has been reached. */ +#define VERR_GSTCTL_MAX_CID_COUNT_REACHED (-6224) +/** Started guest process terminated with an exit code <> 0. */ +#define VERR_GSTCTL_PROCESS_EXIT_CODE (-6225) +/** @} */ + + +/** @name GIM Status Codes + * @{ + */ +/** No GIM provider is configured for this VM. */ +#define VERR_GIM_NOT_ENABLED (-6300) +/** GIM internal processing error \#1. */ +#define VERR_GIM_IPE_1 (-6301) +/** GIM internal processing error \#2. */ +#define VERR_GIM_IPE_2 (-6302) +/** GIM internal processing error \#3. */ +#define VERR_GIM_IPE_3 (-6303) +/** The GIM provider does not support any paravirtualized TSC. */ +#define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304) +/** The guest has not setup use of the paravirtualized TSC. */ +#define VERR_GIM_PVTSC_NOT_ENABLED (-6305) +/** Unknown or invalid GIM provider. */ +#define VERR_GIM_INVALID_PROVIDER (-6306) +/** GIM generic operation failed. */ +#define VERR_GIM_OPERATION_FAILED (-6307) +/** The GIM provider does not support any hypercalls. */ +#define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308) +/** The guest has not setup use of the hypercalls. */ +#define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309) +/** The GIM device is not registered with GIM when it ought to be. */ +#define VERR_GIM_DEVICE_NOT_REGISTERED (-6310) +/** Hypercall cannot be enabled/performed due to access/permissions/CPL. */ +#define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311) +/** Failed to read to a memory region while performing a hypercall. */ +#define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312) +/** Failed to write to a memory region while performing a hypercall. */ +#define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313) +/** Generic hypercall operation failure. */ +#define VERR_GIM_HYPERCALL_FAILED (-6314) +/** No debug connection configured. */ +#define VERR_GIM_NO_DEBUG_CONNECTION (-6315) +/** Return to ring-3 to perform the hypercall there. */ +#define VINF_GIM_R3_HYPERCALL 6316 +/** Continuing hypercall at the same RIP, continue guest execution. */ +#define VINF_GIM_HYPERCALL_CONTINUING 6317 +/** Instruction that triggers the hypercall is invalid/unrecognized. */ +#define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318) +/** @} */ + + +/** @name Main API Status Codes + * @{ + */ +/** The configuration constructor in main failed due to a COM error. Check + * the release log of the VM for further details. */ +#define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400) +/** The configuration constructor in main failed due to an internal consistency + * error. Consult the release log of the VM for further details. */ +#define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401) +/** @} */ + + +/** @name VBox Drag and Drop Status Codes + * @{ + */ +/** Guest side reported an error. */ +#define VERR_GSTDND_GUEST_ERROR (-6500) +/** @} */ + + +/** @name Audio Status Codes + * @{ + */ +/** Host backend couldn't be initialized. Happen if the audio server is not + * reachable, audio hardware is not available or similar. We should use the + * NULL audio driver. */ +#define VERR_AUDIO_BACKEND_INIT_FAILED (-6600) +/** No host backend attached / available. */ +#define VERR_AUDIO_BACKEND_NOT_ATTACHED (-6601) +/** No free input streams. */ +#define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6602) +/** No free output streams. */ +#define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6603) +/** Pending stream disable operation in progress. */ +#define VERR_AUDIO_STREAM_PENDING_DISABLE (-6604) +/** There is more data available. + * This can happen due to a buffer wraparound of a buffer read/write operation. */ +#define VINF_AUDIO_MORE_DATA_AVAILABLE (6605) +/** Stream is not ready for requested operation. */ +#define VERR_AUDIO_STREAM_NOT_READY (-6605) +/** Stream could not be created. + * This might due to missing host (backend) drivers or a host not having the + * required hardware, or that the requested stream configuration + * is not supported by the host backend. */ +#define VERR_AUDIO_STREAM_COULD_NOT_CREATE (-6606) +/** @} */ + + +/** @name APIC Status Codes + * @{ + */ +/** No pending interrupt. */ +#define VERR_APIC_INTR_NOT_PENDING (-6700) +/** Pending interrupt is masked by TPR. */ +#define VERR_APIC_INTR_MASKED_BY_TPR (-6701) +/** APIC did not accept the interrupt. */ +#define VERR_APIC_INTR_DISCARDED (-6702) +/** @} */ + +/** @name NEM Status Codes + * @{ + */ +/** NEM is not enabled. */ +#define VERR_NEM_NOT_ENABLED (-6800) +/** NEM is not available. */ +#define VERR_NEM_NOT_AVAILABLE (-6801) +/** NEM init failed. */ +#define VERR_NEM_INIT_FAILED (-6802) +/** NEM init failed because of missing kernel API (\#1). */ +#define VERR_NEM_MISSING_KERNEL_API_1 (-6803) +/** NEM can only operate from ring-3. */ +#define VERR_NEM_RING3_ONLY (-6804) +/** NEM failed to create a native VM instance. */ +#define VERR_NEM_VM_CREATE_FAILED (-6805) +/** NEM failed to map page(s) into the VM. */ +#define VERR_NEM_MAP_PAGES_FAILED (-6806) +/** NEM failed to unmap page(s) into the VM. */ +#define VERR_NEM_UNMAP_PAGES_FAILED (-6807) +/** NEM failed to get registers. */ +#define VERR_NEM_GET_REGISTERS_FAILED (-6808) +/** NEM failed to set registers. */ +#define VERR_NEM_SET_REGISTERS_FAILED (-6809) +/** Get register caller must flush the TLB (not an error). */ +#define VERR_NEM_FLUSH_TLB (-6810) +/** Get register caller must flush the TLB. */ +#define VINF_NEM_FLUSH_TLB (6810) +/** NEM failed to set TSC. */ +#define VERR_NEM_SET_TSC (-6811) +/** NEM init failed because of missing kernel API (\#2). */ +#define VERR_NEM_MISSING_KERNEL_API_2 (-6812) +/** NEM init failed because of missing kernel API (\#3). */ +#define VERR_NEM_MISSING_KERNEL_API_3 (-6813) +/** NEM init failed because of missing kernel API (\#4). */ +#define VERR_NEM_MISSING_KERNEL_API_4 (-6814) +/** NEM init failed because of missing kernel API (\#5). */ +#define VERR_NEM_MISSING_KERNEL_API_5 (-6815) + +/** NEM internal processing error \#0. */ +#define VERR_NEM_IPE_0 (-6890) +/** NEM internal processing error \#1. */ +#define VERR_NEM_IPE_1 (-6891) +/** NEM internal processing error \#2. */ +#define VERR_NEM_IPE_2 (-6892) +/** NEM internal processing error \#3. */ +#define VERR_NEM_IPE_3 (-6893) +/** NEM internal processing error \#4. */ +#define VERR_NEM_IPE_4 (-6894) +/** NEM internal processing error \#5. */ +#define VERR_NEM_IPE_5 (-6895) +/** NEM internal processing error \#6. */ +#define VERR_NEM_IPE_6 (-6896) +/** NEM internal processing error \#7. */ +#define VERR_NEM_IPE_7 (-6897) +/** NEM internal processing error \#8. */ +#define VERR_NEM_IPE_8 (-6898) +/** NEM internal processing error \#9. */ +#define VERR_NEM_IPE_9 (-6899) +/** @} */ + +/** @name Recording Status Codes + * @{ + */ +/** Codec was not found. */ +#define VERR_RECORDING_CODEC_NOT_FOUND (-6900) +/** Codec initialization failed. */ +#define VERR_RECORDING_CODEC_INIT_FAILED (-6902) +/** Codec is not supported. */ +#define VERR_RECORDING_CODEC_NOT_SUPPORTED (-6903) +/** Format not supported by the codec. */ +#define VERR_RECORDING_FORMAT_NOT_SUPPORTED (-6904) +/** Recording is not possible due to a set restriction. */ +#define VERR_RECORDING_RESTRICTED (-6905) +/** Recording limit (time, size, ...) has been reached. */ +#define VINF_RECORDING_LIMIT_REACHED (6906) +/** Recording limit (time, size, ...) has been reached. */ +#define VERR_RECORDING_LIMIT_REACHED (-6906) +/** Recording has been throttled due to current settings. + * This e.g. can happen when submitting more video frames than + * the current FPS setting allows. */ +#define VINF_RECORDING_THROTTLED (6907) +/** Recording has been throttled due to current settings. + * This e.g. can happen when submitting more video frames than + * the current FPS setting allows. */ +#define VERR_RECORDING_THROTTLED (-6907) +/** @} */ + +/** @name Shared Clipboard Status Codes + * @{ + */ +/** Maximum of concurrent clipboard transfers has been reached. */ +#define VERR_SHCLPB_MAX_TRANSFERS_REACHED (-7100) +/** Maximum number of Shared Clipboard objects has been reached. */ +#define VERR_SHCLPB_MAX_OBJECTS_REACHED (-7101) +/** Maximum number of Shared Clipboard lists has been reached. */ +#define VERR_SHCLPB_MAX_LISTS_REACHED (-7102) +/** A Shared Clipboard list handle is invalid. */ +#define VERR_SHCLPB_LIST_HANDLE_INVALID (-7103) +/** A Shared Clipboard objects handle is invalid. */ +#define VERR_SHCLPB_OBJ_HANDLE_INVALID (-7104) +/** A Shared Clipboard transfer ID is invalid. */ +#define VERR_SHCLPB_TRANSFER_ID_NOT_FOUND (-7105) +/** Maximum number of Shared Clipboard events for an event source has been reached. */ +#define VERR_SHCLPB_MAX_EVENTS_REACHED (-7106) +/** @} */ +/* SED-END */ + +/** @} */ + + +#endif /* !VBOX_INCLUDED_err_h */ + |