Adding upstream version 18.2.2.upstream/18.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 11953 insertions, 0 deletions

diff --git a/src/spdk/dpdk/drivers/net/bnx2x/bnx2x.c b/src/spdk/dpdk/drivers/net/bnx2x/bnx2x.c
new file mode 100644
index 000000000..ff7646b25
--- /dev/null
+++ b/src/spdk/dpdk/drivers/net/bnx2x/bnx2x.c
@@ -0,0 +1,11953 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2007-2013 Broadcom Corporation.
+ *
+ * Eric Davis        <edavis@broadcom.com>
+ * David Christensen <davidch@broadcom.com>
+ * Gary Zambrano     <zambrano@broadcom.com>
+ *
+ * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
+ * Copyright (c) 2015-2018 Cavium Inc.
+ * All rights reserved.
+ * www.cavium.com
+ */
+
+#define BNX2X_DRIVER_VERSION "1.78.18"
+
+#include "bnx2x.h"
+#include "bnx2x_vfpf.h"
+#include "ecore_sp.h"
+#include "ecore_init.h"
+#include "ecore_init_ops.h"
+
+#include "rte_version.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <zlib.h>
+#include <rte_string_fns.h>
+
+#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
+#define BNX2X_PMD_VERSION_MAJOR 1
+#define BNX2X_PMD_VERSION_MINOR 1
+#define BNX2X_PMD_VERSION_REVISION 0
+#define BNX2X_PMD_VERSION_PATCH 1
+
+static inline const char *
+bnx2x_pmd_version(void)
+{
+	static char version[32];
+
+	snprintf(version, sizeof(version), "%s %s_%d.%d.%d.%d",
+			BNX2X_PMD_VER_PREFIX,
+			BNX2X_DRIVER_VERSION,
+			BNX2X_PMD_VERSION_MAJOR,
+			BNX2X_PMD_VERSION_MINOR,
+			BNX2X_PMD_VERSION_REVISION,
+			BNX2X_PMD_VERSION_PATCH);
+
+	return version;
+}
+
+static z_stream zlib_stream;
+
+#define EVL_VLID_MASK 0x0FFF
+
+#define BNX2X_DEF_SB_ATT_IDX 0x0001
+#define BNX2X_DEF_SB_IDX     0x0002
+
+/*
+ * FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
+ * function HW initialization.
+ */
+#define FLR_WAIT_USEC     10000	/* 10 msecs */
+#define FLR_WAIT_INTERVAL 50	/* usecs */
+#define FLR_POLL_CNT      (FLR_WAIT_USEC / FLR_WAIT_INTERVAL)	/* 200 */
+
+struct pbf_pN_buf_regs {
+	int pN;
+	uint32_t init_crd;
+	uint32_t crd;
+	uint32_t crd_freed;
+};
+
+struct pbf_pN_cmd_regs {
+	int pN;
+	uint32_t lines_occup;
+	uint32_t lines_freed;
+};
+
+/* resources needed for unloading a previously loaded device */
+
+#define BNX2X_PREV_WAIT_NEEDED 1
+rte_spinlock_t bnx2x_prev_mtx;
+struct bnx2x_prev_list_node {
+	LIST_ENTRY(bnx2x_prev_list_node) node;
+	uint8_t bus;
+	uint8_t slot;
+	uint8_t path;
+	uint8_t aer;
+	uint8_t undi;
+};
+
+static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
+	= LIST_HEAD_INITIALIZER(bnx2x_prev_list);
+
+static int load_count[2][3] = { { 0 } };
+	/* per-path: 0-common, 1-port0, 2-port1 */
+
+static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
+				uint8_t cmng_type);
+static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
+static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
+			      uint8_t port);
+static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
+static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
+static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
+static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
+static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
+				     uint8_t print);
+static void bnx2x_int_disable(struct bnx2x_softc *sc);
+static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
+static void bnx2x_pf_disable(struct bnx2x_softc *sc);
+static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
+				 struct bnx2x_fastpath *fp,
+				 uint16_t rx_bd_prod, uint16_t rx_cq_prod);
+static void bnx2x_link_report_locked(struct bnx2x_softc *sc);
+static void bnx2x_link_report(struct bnx2x_softc *sc);
+void bnx2x_link_status_update(struct bnx2x_softc *sc);
+static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
+static void bnx2x_free_mem(struct bnx2x_softc *sc);
+static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
+static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
+static __rte_noinline
+int bnx2x_nic_load(struct bnx2x_softc *sc);
+
+static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
+static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp);
+static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
+			 uint8_t storm, uint16_t index, uint8_t op,
+			 uint8_t update);
+
+int bnx2x_test_bit(int nr, volatile unsigned long *addr)
+{
+	int res;
+
+	mb();
+	res = ((*addr) & (1UL << nr)) != 0;
+	mb();
+	return res;
+}
+
+void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
+{
+	__sync_fetch_and_or(addr, (1UL << nr));
+}
+
+void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
+{
+	__sync_fetch_and_and(addr, ~(1UL << nr));
+}
+
+int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = (1UL << nr);
+	return __sync_fetch_and_and(addr, ~mask) & mask;
+}
+
+int bnx2x_cmpxchg(volatile int *addr, int old, int new)
+{
+	return __sync_val_compare_and_swap(addr, old, new);
+}
+
+int
+bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
+	      const char *msg, uint32_t align)
+{
+	char mz_name[RTE_MEMZONE_NAMESIZE];
+	const struct rte_memzone *z;
+
+	dma->sc = sc;
+	if (IS_PF(sc))
+		snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, SC_ABS_FUNC(sc), msg,
+			rte_get_timer_cycles());
+	else
+		snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, sc->pcie_device, msg,
+			rte_get_timer_cycles());
+
+	/* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
+	z = rte_memzone_reserve_aligned(mz_name, (uint64_t)size,
+					SOCKET_ID_ANY,
+					RTE_MEMZONE_IOVA_CONTIG, align);
+	if (z == NULL) {
+		PMD_DRV_LOG(ERR, sc, "DMA alloc failed for %s", msg);
+		return -ENOMEM;
+	}
+	dma->paddr = (uint64_t) z->iova;
+	dma->vaddr = z->addr;
+	dma->mzone = (const void *)z;
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "%s: virt=%p phys=%" PRIx64, msg, dma->vaddr, dma->paddr);
+
+	return 0;
+}
+
+void bnx2x_dma_free(struct bnx2x_dma *dma)
+{
+	if (dma->mzone == NULL)
+		return;
+
+	rte_memzone_free((const struct rte_memzone *)dma->mzone);
+	dma->sc = NULL;
+	dma->paddr = 0;
+	dma->vaddr = NULL;
+	dma->nseg = 0;
+	dma->mzone = NULL;
+}
+
+static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+	uint32_t lock_status;
+	uint32_t resource_bit = (1 << resource);
+	int func = SC_FUNC(sc);
+	uint32_t hw_lock_control_reg;
+	int cnt;
+
+#ifndef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
+	if (resource)
+		PMD_INIT_FUNC_TRACE(sc);
+#else
+	PMD_INIT_FUNC_TRACE(sc);
+#endif
+
+	/* validate the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
+			    resource);
+		return -1;
+	}
+
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
+	} else {
+		hw_lock_control_reg =
+		    (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
+	}
+
+	/* validate the resource is not already taken */
+	lock_status = REG_RD(sc, hw_lock_control_reg);
+	if (lock_status & resource_bit) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "resource in use (status 0x%x bit 0x%x)",
+			    lock_status, resource_bit);
+		return -1;
+	}
+
+	/* try every 5ms for 5 seconds */
+	for (cnt = 0; cnt < 1000; cnt++) {
+		REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
+		lock_status = REG_RD(sc, hw_lock_control_reg);
+		if (lock_status & resource_bit) {
+			return 0;
+		}
+		DELAY(5000);
+	}
+
+	PMD_DRV_LOG(NOTICE, sc, "Resource 0x%x resource_bit 0x%x lock timeout!",
+		    resource, resource_bit);
+	return -1;
+}
+
+static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+	uint32_t lock_status;
+	uint32_t resource_bit = (1 << resource);
+	int func = SC_FUNC(sc);
+	uint32_t hw_lock_control_reg;
+
+#ifndef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
+	if (resource)
+		PMD_INIT_FUNC_TRACE(sc);
+#else
+	PMD_INIT_FUNC_TRACE(sc);
+#endif
+
+	/* validate the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "(resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE)"
+			    " resource_bit 0x%x", resource, resource_bit);
+		return -1;
+	}
+
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
+	} else {
+		hw_lock_control_reg =
+		    (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
+	}
+
+	/* validate the resource is currently taken */
+	lock_status = REG_RD(sc, hw_lock_control_reg);
+	if (!(lock_status & resource_bit)) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "resource not in use (status 0x%x bit 0x%x)",
+			    lock_status, resource_bit);
+		return -1;
+	}
+
+	REG_WR(sc, hw_lock_control_reg, resource_bit);
+	return 0;
+}
+
+static void bnx2x_acquire_phy_lock(struct bnx2x_softc *sc)
+{
+	BNX2X_PHY_LOCK(sc);
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
+}
+
+static void bnx2x_release_phy_lock(struct bnx2x_softc *sc)
+{
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
+	BNX2X_PHY_UNLOCK(sc);
+}
+
+/* copy command into DMAE command memory and set DMAE command Go */
+void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
+{
+	uint32_t cmd_offset;
+	uint32_t i;
+
+	cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
+	for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
+		REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
+	}
+
+	REG_WR(sc, dmae_reg_go_c[idx], 1);
+}
+
+uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
+{
+	return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
+			  DMAE_COMMAND_C_TYPE_ENABLE);
+}
+
+uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
+{
+	return opcode & ~DMAE_COMMAND_SRC_RESET;
+}
+
+uint32_t
+bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
+		uint8_t with_comp, uint8_t comp_type)
+{
+	uint32_t opcode = 0;
+
+	opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
+		   (dst_type << DMAE_COMMAND_DST_SHIFT));
+
+	opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
+
+	opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
+
+	opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
+		   (SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
+
+	opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
+
+#ifdef __BIG_ENDIAN
+	opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
+#else
+	opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
+#endif
+
+	if (with_comp) {
+		opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
+	}
+
+	return opcode;
+}
+
+static void
+bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
+			uint8_t src_type, uint8_t dst_type)
+{
+	memset(dmae, 0, sizeof(struct dmae_command));
+
+	/* set the opcode */
+	dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
+				       TRUE, DMAE_COMP_PCI);
+
+	/* fill in the completion parameters */
+	dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
+	dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
+	dmae->comp_val = DMAE_COMP_VAL;
+}
+
+/* issue a DMAE command over the init channel and wait for completion */
+static int
+bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
+{
+	uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
+	int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
+
+	/* reset completion */
+	*wb_comp = 0;
+
+	/* post the command on the channel used for initializations */
+	bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));
+
+	/* wait for completion */
+	DELAY(500);
+
+	while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
+		if (!timeout ||
+		    (sc->recovery_state != BNX2X_RECOVERY_DONE &&
+		     sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
+			PMD_DRV_LOG(INFO, sc, "DMAE timeout!");
+			return DMAE_TIMEOUT;
+		}
+
+		timeout--;
+		DELAY(50);
+	}
+
+	if (*wb_comp & DMAE_PCI_ERR_FLAG) {
+		PMD_DRV_LOG(INFO, sc, "DMAE PCI error!");
+		return DMAE_PCI_ERROR;
+	}
+
+	return 0;
+}
+
+void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
+{
+	struct dmae_command dmae;
+	uint32_t *data;
+	uint32_t i;
+	int rc;
+
+	if (!sc->dmae_ready) {
+		data = BNX2X_SP(sc, wb_data[0]);
+
+		for (i = 0; i < len32; i++) {
+			data[i] = REG_RD(sc, (src_addr + (i * 4)));
+		}
+
+		return;
+	}
+
+	/* set opcode and fixed command fields */
+	bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
+
+	/* fill in addresses and len */
+	dmae.src_addr_lo = (src_addr >> 2);	/* GRC addr has dword resolution */
+	dmae.src_addr_hi = 0;
+	dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
+	dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
+	dmae.len = len32;
+
+	/* issue the command and wait for completion */
+	if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
+		rte_panic("DMAE failed (%d)", rc);
+	};
+}
+
+void
+bnx2x_write_dmae(struct bnx2x_softc *sc, rte_iova_t dma_addr, uint32_t dst_addr,
+	       uint32_t len32)
+{
+	struct dmae_command dmae;
+	int rc;
+
+	if (!sc->dmae_ready) {
+		ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
+		return;
+	}
+
+	/* set opcode and fixed command fields */
+	bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
+
+	/* fill in addresses and len */
+	dmae.src_addr_lo = U64_LO(dma_addr);
+	dmae.src_addr_hi = U64_HI(dma_addr);
+	dmae.dst_addr_lo = (dst_addr >> 2);	/* GRC addr has dword resolution */
+	dmae.dst_addr_hi = 0;
+	dmae.len = len32;
+
+	/* issue the command and wait for completion */
+	if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
+		rte_panic("DMAE failed (%d)", rc);
+	}
+}
+
+static void
+bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
+			uint32_t addr, uint32_t len)
+{
+	uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
+	uint32_t offset = 0;
+
+	while (len > dmae_wr_max) {
+		bnx2x_write_dmae(sc, (phys_addr + offset),	/* src DMA address */
+			       (addr + offset),	/* dst GRC address */
+			       dmae_wr_max);
+		offset += (dmae_wr_max * 4);
+		len -= dmae_wr_max;
+	}
+
+	bnx2x_write_dmae(sc, (phys_addr + offset),	/* src DMA address */
+		       (addr + offset),	/* dst GRC address */
+		       len);
+}
+
+void
+bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
+		       uint32_t cid)
+{
+	/* ustorm cxt validation */
+	cxt->ustorm_ag_context.cdu_usage =
+	    CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
+				   CDU_REGION_NUMBER_UCM_AG,
+				   ETH_CONNECTION_TYPE);
+	/* xcontext validation */
+	cxt->xstorm_ag_context.cdu_reserved =
+	    CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
+				   CDU_REGION_NUMBER_XCM_AG,
+				   ETH_CONNECTION_TYPE);
+}
+
+static void
+bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
+			    uint8_t sb_index, uint8_t ticks)
+{
+	uint32_t addr =
+	    (BAR_CSTRORM_INTMEM +
+	     CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
+
+	REG_WR8(sc, addr, ticks);
+}
+
+static void
+bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
+			    uint8_t sb_index, uint8_t disable)
+{
+	uint32_t enable_flag =
+	    (disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
+	uint32_t addr =
+	    (BAR_CSTRORM_INTMEM +
+	     CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
+	uint8_t flags;
+
+	/* clear and set */
+	flags = REG_RD8(sc, addr);
+	flags &= ~HC_INDEX_DATA_HC_ENABLED;
+	flags |= enable_flag;
+	REG_WR8(sc, addr, flags);
+}
+
+void
+bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
+			     uint8_t sb_index, uint8_t disable, uint16_t usec)
+{
+	uint8_t ticks = (usec / 4);
+
+	bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);
+
+	disable = (disable) ? 1 : ((usec) ? 0 : 1);
+	bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
+}
+
+uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
+{
+	return REG_RD(sc, reg_addr);
+}
+
+void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
+{
+	REG_WR(sc, reg_addr, val);
+}
+
+void
+elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
+		   __rte_unused const elink_log_id_t elink_log_id, ...)
+{
+	PMD_DRV_LOG(DEBUG, sc, "ELINK EVENT LOG (%d)", elink_log_id);
+}
+
+static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
+{
+	uint32_t spio_reg;
+
+	/* Only 2 SPIOs are configurable */
+	if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid SPIO 0x%x", spio);
+		return -1;
+	}
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
+
+	/* read SPIO and mask except the float bits */
+	spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
+
+	switch (mode) {
+	case MISC_SPIO_OUTPUT_LOW:
+		/* clear FLOAT and set CLR */
+		spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
+		spio_reg |= (spio << MISC_SPIO_CLR_POS);
+		break;
+
+	case MISC_SPIO_OUTPUT_HIGH:
+		/* clear FLOAT and set SET */
+		spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
+		spio_reg |= (spio << MISC_SPIO_SET_POS);
+		break;
+
+	case MISC_SPIO_INPUT_HI_Z:
+		/* set FLOAT */
+		spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(sc, MISC_REG_SPIO, spio_reg);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
+
+	return 0;
+}
+
+static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+			  REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+	int gpio_shift = gpio_num;
+	if (gpio_port)
+		gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+	uint32_t gpio_mask = (1 << gpio_shift);
+	uint32_t gpio_reg;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
+		return -1;
+	}
+
+	/* read GPIO value */
+	gpio_reg = REG_RD(sc, MISC_REG_GPIO);
+
+	/* get the requested pin value */
+	return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
+}
+
+static int
+bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+			  REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+	int gpio_shift = gpio_num;
+	if (gpio_port)
+		gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+	uint32_t gpio_mask = (1 << gpio_shift);
+	uint32_t gpio_reg;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
+		return -1;
+	}
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	/* read GPIO and mask except the float bits */
+	gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+		/* clear FLOAT and set CLR */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+		/* clear FLOAT and set SET */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+		/* set FLOAT */
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(sc, MISC_REG_GPIO, gpio_reg);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	return 0;
+}
+
+static int
+bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
+{
+	uint32_t gpio_reg;
+
+	/* any port swapping should be handled by caller */
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	/* read GPIO and mask except the float bits */
+	gpio_reg = REG_RD(sc, MISC_REG_GPIO);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+		/* set CLR */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+		/* set SET */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+		/* set FLOAT */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+		break;
+
+	default:
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Invalid GPIO mode assignment %d", mode);
+		bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+		return -1;
+	}
+
+	REG_WR(sc, MISC_REG_GPIO, gpio_reg);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	return 0;
+}
+
+static int
+bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
+		   uint8_t port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+			  REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+	int gpio_shift = gpio_num;
+	if (gpio_port)
+		gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+	uint32_t gpio_mask = (1 << gpio_shift);
+	uint32_t gpio_reg;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
+		return -1;
+	}
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	/* read GPIO int */
+	gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
+		/* clear SET and set CLR */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
+		/* clear CLR and set SET */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+	return 0;
+}
+
+uint32_t
+elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
+{
+	return bnx2x_gpio_read(sc, gpio_num, port);
+}
+
+uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode,	/* 0=low 1=high */
+			    uint8_t port)
+{
+	return bnx2x_gpio_write(sc, gpio_num, mode, port);
+}
+
+uint8_t
+elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
+			 uint8_t mode /* 0=low 1=high */ )
+{
+	return bnx2x_gpio_mult_write(sc, pins, mode);
+}
+
+uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode,	/* 0=low 1=high */
+				uint8_t port)
+{
+	return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
+}
+
+void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
+{
+	REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
+		    (SC_FUNC(sc) * sizeof(uint32_t))), 1);
+}
+
+/* send the MCP a request, block until there is a reply */
+uint32_t
+elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
+{
+	int mb_idx = SC_FW_MB_IDX(sc);
+	uint32_t seq;
+	uint32_t rc = 0;
+	uint32_t cnt = 1;
+	uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
+
+	seq = ++sc->fw_seq;
+	SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
+	SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "wrote command 0x%08x to FW MB param 0x%08x",
+		    (command | seq), param);
+
+	/* Let the FW do it's magic. GIve it up to 5 seconds... */
+	do {
+		DELAY(delay * 1000);
+		rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
+
+	/* is this a reply to our command? */
+	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
+		rc &= FW_MSG_CODE_MASK;
+	} else {
+		/* Ruh-roh! */
+		PMD_DRV_LOG(NOTICE, sc, "FW failed to respond!");
+		rc = 0;
+	}
+
+	return rc;
+}
+
+static uint32_t
+bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
+{
+	return elink_cb_fw_command(sc, command, param);
+}
+
+static void
+__storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
+			   rte_iova_t mapping)
+{
+	REG_WR(sc, addr, U64_LO(mapping));
+	REG_WR(sc, (addr + 4), U64_HI(mapping));
+}
+
+static void
+storm_memset_spq_addr(struct bnx2x_softc *sc, rte_iova_t mapping,
+		      uint16_t abs_fid)
+{
+	uint32_t addr = (XSEM_REG_FAST_MEMORY +
+			 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
+	__storm_memset_dma_mapping(sc, addr, mapping);
+}
+
+static void
+storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
+{
+	REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
+		pf_id);
+	REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
+		pf_id);
+	REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
+		pf_id);
+	REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
+		pf_id);
+}
+
+static void
+storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
+{
+	REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
+		enable);
+	REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
+		enable);
+	REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
+		enable);
+	REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
+		enable);
+}
+
+static void
+storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
+		     uint16_t pfid)
+{
+	uint32_t addr;
+	size_t size;
+
+	addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
+	size = sizeof(struct event_ring_data);
+	ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
+}
+
+static void
+storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
+{
+	uint32_t addr = (BAR_CSTRORM_INTMEM +
+			 CSTORM_EVENT_RING_PROD_OFFSET(pfid));
+	REG_WR16(sc, addr, eq_prod);
+}
+
+/*
+ * Post a slowpath command.
+ *
+ * A slowpath command is used to propagate a configuration change through
+ * the controller in a controlled manner, allowing each STORM processor and
+ * other H/W blocks to phase in the change.  The commands sent on the
+ * slowpath are referred to as ramrods.  Depending on the ramrod used the
+ * completion of the ramrod will occur in different ways.  Here's a
+ * breakdown of ramrods and how they complete:
+ *
+ * RAMROD_CMD_ID_ETH_PORT_SETUP
+ *   Used to setup the leading connection on a port.  Completes on the
+ *   Receive Completion Queue (RCQ) of that port (typically fp[0]).
+ *
+ * RAMROD_CMD_ID_ETH_CLIENT_SETUP
+ *   Used to setup an additional connection on a port.  Completes on the
+ *   RCQ of the multi-queue/RSS connection being initialized.
+ *
+ * RAMROD_CMD_ID_ETH_STAT_QUERY
+ *   Used to force the storm processors to update the statistics database
+ *   in host memory.  This ramrod is send on the leading connection CID and
+ *   completes as an index increment of the CSTORM on the default status
+ *   block.
+ *
+ * RAMROD_CMD_ID_ETH_UPDATE
+ *   Used to update the state of the leading connection, usually to udpate
+ *   the RSS indirection table.  Completes on the RCQ of the leading
+ *   connection. (Not currently used under FreeBSD until OS support becomes
+ *   available.)
+ *
+ * RAMROD_CMD_ID_ETH_HALT
+ *   Used when tearing down a connection prior to driver unload.  Completes
+ *   on the RCQ of the multi-queue/RSS connection being torn down.  Don't
+ *   use this on the leading connection.
+ *
+ * RAMROD_CMD_ID_ETH_SET_MAC
+ *   Sets the Unicast/Broadcast/Multicast used by the port.  Completes on
+ *   the RCQ of the leading connection.
+ *
+ * RAMROD_CMD_ID_ETH_CFC_DEL
+ *   Used when tearing down a conneciton prior to driver unload.  Completes
+ *   on the RCQ of the leading connection (since the current connection
+ *   has been completely removed from controller memory).
+ *
+ * RAMROD_CMD_ID_ETH_PORT_DEL
+ *   Used to tear down the leading connection prior to driver unload,
+ *   typically fp[0].  Completes as an index increment of the CSTORM on the
+ *   default status block.
+ *
+ * RAMROD_CMD_ID_ETH_FORWARD_SETUP
+ *   Used for connection offload.  Completes on the RCQ of the multi-queue
+ *   RSS connection that is being offloaded.  (Not currently used under
+ *   FreeBSD.)
+ *
+ * There can only be one command pending per function.
+ *
+ * Returns:
+ *   0 = Success, !0 = Failure.
+ */
+
+/* must be called under the spq lock */
+static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
+{
+	struct eth_spe *next_spe = sc->spq_prod_bd;
+
+	if (sc->spq_prod_bd == sc->spq_last_bd) {
+		/* wrap back to the first eth_spq */
+		sc->spq_prod_bd = sc->spq;
+		sc->spq_prod_idx = 0;
+	} else {
+		sc->spq_prod_bd++;
+		sc->spq_prod_idx++;
+	}
+
+	return next_spe;
+}
+
+/* must be called under the spq lock */
+static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
+{
+	int func = SC_FUNC(sc);
+
+	/*
+	 * Make sure that BD data is updated before writing the producer.
+	 * BD data is written to the memory, the producer is read from the
+	 * memory, thus we need a full memory barrier to ensure the ordering.
+	 */
+	mb();
+
+	REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
+		 sc->spq_prod_idx);
+
+	mb();
+}
+
+/**
+ * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
+ *
+ * @cmd:      command to check
+ * @cmd_type: command type
+ */
+static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
+{
+	if ((cmd_type == NONE_CONNECTION_TYPE) ||
+	    (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
+	    (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
+	    (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
+		return TRUE;
+	} else {
+		return FALSE;
+	}
+}
+
+/**
+ * bnx2x_sp_post - place a single command on an SP ring
+ *
+ * @sc:         driver handle
+ * @command:    command to place (e.g. SETUP, FILTER_RULES, etc.)
+ * @cid:        SW CID the command is related to
+ * @data_hi:    command private data address (high 32 bits)
+ * @data_lo:    command private data address (low 32 bits)
+ * @cmd_type:   command type (e.g. NONE, ETH)
+ *
+ * SP data is handled as if it's always an address pair, thus data fields are
+ * not swapped to little endian in upper functions. Instead this function swaps
+ * data as if it's two uint32 fields.
+ */
+int
+bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
+	    uint32_t data_lo, int cmd_type)
+{
+	struct eth_spe *spe;
+	uint16_t type;
+	int common;
+
+	common = bnx2x_is_contextless_ramrod(command, cmd_type);
+
+	if (common) {
+		if (!atomic_load_acq_long(&sc->eq_spq_left)) {
+			PMD_DRV_LOG(INFO, sc, "EQ ring is full!");
+			return -1;
+		}
+	} else {
+		if (!atomic_load_acq_long(&sc->cq_spq_left)) {
+			PMD_DRV_LOG(INFO, sc, "SPQ ring is full!");
+			return -1;
+		}
+	}
+
+	spe = bnx2x_sp_get_next(sc);
+
+	/* CID needs port number to be encoded int it */
+	spe->hdr.conn_and_cmd_data =
+	    htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
+
+	type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
+
+	/* TBD: Check if it works for VFs */
+	type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
+		 SPE_HDR_FUNCTION_ID);
+
+	spe->hdr.type = htole16(type);
+
+	spe->data.update_data_addr.hi = htole32(data_hi);
+	spe->data.update_data_addr.lo = htole32(data_lo);
+
+	/*
+	 * It's ok if the actual decrement is issued towards the memory
+	 * somewhere between the lock and unlock. Thus no more explict
+	 * memory barrier is needed.
+	 */
+	if (common) {
+		atomic_subtract_acq_long(&sc->eq_spq_left, 1);
+	} else {
+		atomic_subtract_acq_long(&sc->cq_spq_left, 1);
+	}
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
+		    "data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
+		    sc->spq_prod_idx,
+		    (uint32_t) U64_HI(sc->spq_dma.paddr),
+		    (uint32_t) (U64_LO(sc->spq_dma.paddr) +
+				(uint8_t *) sc->spq_prod_bd -
+				(uint8_t *) sc->spq), command, common,
+		    HW_CID(sc, cid), data_hi, data_lo, type,
+		    atomic_load_acq_long(&sc->cq_spq_left),
+		    atomic_load_acq_long(&sc->eq_spq_left));
+
+	/* RAMROD completion is processed in bnx2x_intr_legacy()
+	 * which can run from different contexts.
+	 * Ask bnx2x_intr_intr() to process RAMROD
+	 * completion whenever it gets scheduled.
+	 */
+	rte_atomic32_set(&sc->scan_fp, 1);
+	bnx2x_sp_prod_update(sc);
+
+	return 0;
+}
+
+static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
+{
+	SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
+		 sc->fw_drv_pulse_wr_seq);
+}
+
+static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
+{
+	uint16_t hw_cons;
+	struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+	if (unlikely(!txq)) {
+		PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+		return 0;
+	}
+
+	mb();			/* status block fields can change */
+	hw_cons = le16toh(*fp->tx_cons_sb);
+	return hw_cons != txq->tx_pkt_head;
+}
+
+static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+	/* expand this for multi-cos if ever supported */
+	return bnx2x_tx_queue_has_work(fp);
+}
+
+static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+	uint16_t rx_cq_cons_sb;
+	struct bnx2x_rx_queue *rxq;
+	rxq = fp->sc->rx_queues[fp->index];
+	if (unlikely(!rxq)) {
+		PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
+		return 0;
+	}
+
+	mb();			/* status block fields can change */
+	rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
+	if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
+		     MAX_RCQ_ENTRIES(rxq)))
+		rx_cq_cons_sb++;
+
+	PMD_RX_LOG(DEBUG, "hw CQ cons = %d, sw CQ cons = %d",
+		   rx_cq_cons_sb, rxq->rx_cq_head);
+
+	return rxq->rx_cq_head != rx_cq_cons_sb;
+}
+
+static void
+bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+	     union eth_rx_cqe *rr_cqe)
+{
+	int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+	int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+	enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
+	struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "fp=%d cid=%d got ramrod #%d state is %x type is %d",
+		    fp->index, cid, command, sc->state,
+		    rr_cqe->ramrod_cqe.ramrod_type);
+
+	switch (command) {
+	case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
+		PMD_DRV_LOG(DEBUG, sc, "got UPDATE ramrod. CID %d", cid);
+		drv_cmd = ECORE_Q_CMD_UPDATE;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
+		PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] setup ramrod", cid);
+		drv_cmd = ECORE_Q_CMD_SETUP;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
+		PMD_DRV_LOG(DEBUG, sc,
+			    "got MULTI[%d] tx-only setup ramrod", cid);
+		drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_HALT):
+		PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] halt ramrod", cid);
+		drv_cmd = ECORE_Q_CMD_HALT;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_TERMINATE):
+		PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] teminate ramrod", cid);
+		drv_cmd = ECORE_Q_CMD_TERMINATE;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_EMPTY):
+		PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] empty ramrod", cid);
+		drv_cmd = ECORE_Q_CMD_EMPTY;
+		break;
+
+	default:
+		PMD_DRV_LOG(DEBUG, sc,
+			    "ERROR: unexpected MC reply (%d)"
+			    "on fp[%d]", command, fp->index);
+		return;
+	}
+
+	if ((drv_cmd != ECORE_Q_CMD_MAX) &&
+	    q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
+		/*
+		 * q_obj->complete_cmd() failure means that this was
+		 * an unexpected completion.
+		 *
+		 * In this case we don't want to increase the sc->spq_left
+		 * because apparently we haven't sent this command the first
+		 * place.
+		 */
+		// rte_panic("Unexpected SP completion");
+		return;
+	}
+
+	atomic_add_acq_long(&sc->cq_spq_left, 1);
+
+	PMD_DRV_LOG(DEBUG, sc, "sc->cq_spq_left 0x%lx",
+		    atomic_load_acq_long(&sc->cq_spq_left));
+}
+
+static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
+{
+	struct bnx2x_rx_queue *rxq;
+	uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
+	uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
+
+	rte_spinlock_lock(&(fp)->rx_mtx);
+
+	rxq = sc->rx_queues[fp->index];
+	if (!rxq) {
+		PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
+		rte_spinlock_unlock(&(fp)->rx_mtx);
+		return 0;
+	}
+
+	/* CQ "next element" is of the size of the regular element */
+	hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
+	if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
+		     USABLE_RCQ_ENTRIES_PER_PAGE)) {
+		hw_cq_cons++;
+	}
+
+	bd_cons = rxq->rx_bd_head;
+	bd_prod = rxq->rx_bd_tail;
+	bd_prod_fw = bd_prod;
+	sw_cq_cons = rxq->rx_cq_head;
+	sw_cq_prod = rxq->rx_cq_tail;
+
+	/*
+	 * Memory barrier necessary as speculative reads of the rx
+	 * buffer can be ahead of the index in the status block
+	 */
+	rmb();
+
+	while (sw_cq_cons != hw_cq_cons) {
+		union eth_rx_cqe *cqe;
+		struct eth_fast_path_rx_cqe *cqe_fp;
+		uint8_t cqe_fp_flags;
+		enum eth_rx_cqe_type cqe_fp_type;
+
+		comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
+		bd_prod = RX_BD(bd_prod, rxq);
+		bd_cons = RX_BD(bd_cons, rxq);
+
+		cqe = &rxq->cq_ring[comp_ring_cons];
+		cqe_fp = &cqe->fast_path_cqe;
+		cqe_fp_flags = cqe_fp->type_error_flags;
+		cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
+
+		/* is this a slowpath msg? */
+		if (CQE_TYPE_SLOW(cqe_fp_type)) {
+			bnx2x_sp_event(sc, fp, cqe);
+			goto next_cqe;
+		}
+
+		/* is this an error packet? */
+		if (unlikely(cqe_fp_flags &
+			     ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
+			PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
+				   cqe_fp_flags, sw_cq_cons);
+			goto next_rx;
+		}
+
+		PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");
+
+next_rx:
+		bd_cons = NEXT_RX_BD(bd_cons);
+		bd_prod = NEXT_RX_BD(bd_prod);
+		bd_prod_fw = NEXT_RX_BD(bd_prod_fw);
+
+next_cqe:
+		sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
+		sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);
+
+	}			/* while work to do */
+
+	rxq->rx_bd_head = bd_cons;
+	rxq->rx_bd_tail = bd_prod_fw;
+	rxq->rx_cq_head = sw_cq_cons;
+	rxq->rx_cq_tail = sw_cq_prod;
+
+	PMD_RX_LOG(DEBUG, "BD prod = %d, sw CQ prod = %d",
+		   bd_prod_fw, sw_cq_prod);
+
+	/* Update producers */
+	bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);
+
+	rte_spinlock_unlock(&(fp)->rx_mtx);
+
+	return sw_cq_cons != hw_cq_cons;
+}
+
+static uint16_t
+bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
+		uint16_t pkt_idx, uint16_t bd_idx)
+{
+	struct eth_tx_start_bd *tx_start_bd =
+	    &txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
+	uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
+	struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];
+
+	if (likely(tx_mbuf != NULL)) {
+		rte_pktmbuf_free_seg(tx_mbuf);
+	} else {
+		PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
+			   fp->index, (unsigned long)TX_BD(pkt_idx, txq));
+	}
+
+	txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
+	txq->nb_tx_avail += nbd;
+
+	while (nbd--)
+		bd_idx = NEXT_TX_BD(bd_idx);
+
+	return bd_idx;
+}
+
+/* processes transmit completions */
+uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
+{
+	uint16_t bd_cons, hw_cons, sw_cons;
+	__rte_unused uint16_t tx_bd_avail;
+
+	struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+	if (unlikely(!txq)) {
+		PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+		return 0;
+	}
+
+	bd_cons = txq->tx_bd_head;
+	hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
+	sw_cons = txq->tx_pkt_head;
+
+	while (sw_cons != hw_cons) {
+		bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
+		sw_cons++;
+	}
+
+	txq->tx_pkt_head = sw_cons;
+	txq->tx_bd_head = bd_cons;
+
+	tx_bd_avail = txq->nb_tx_avail;
+
+	PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
+		   "pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
+		   fp->index, tx_bd_avail, hw_cons,
+		   txq->tx_pkt_head, txq->tx_pkt_tail,
+		   txq->tx_bd_head, txq->tx_bd_tail);
+	return TRUE;
+}
+
+static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	int i, count;
+
+	/* wait until all TX fastpath tasks have completed */
+	for (i = 0; i < sc->num_queues; i++) {
+		fp = &sc->fp[i];
+
+		count = 1000;
+
+		while (bnx2x_has_tx_work(fp)) {
+			bnx2x_txeof(sc, fp);
+
+			if (count == 0) {
+				PMD_TX_LOG(ERR,
+					   "Timeout waiting for fp[%d] "
+					   "transmits to complete!", i);
+				rte_panic("tx drain failure");
+				return;
+			}
+
+			count--;
+			DELAY(1000);
+			rmb();
+		}
+	}
+
+	return;
+}
+
+static int
+bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
+		 int mac_type, uint8_t wait_for_comp)
+{
+	unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+	int rc;
+
+	/* wait for completion of requested */
+	if (wait_for_comp) {
+		bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	}
+
+	/* Set the mac type of addresses we want to clear */
+	bnx2x_set_bit(mac_type, &vlan_mac_flags);
+
+	rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
+	if (rc < 0)
+		PMD_DRV_LOG(ERR, sc, "Failed to delete MACs (%d)", rc);
+
+	return rc;
+}
+
+static int
+bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
+			unsigned long *rx_accept_flags,
+			unsigned long *tx_accept_flags)
+{
+	/* Clear the flags first */
+	*rx_accept_flags = 0;
+	*tx_accept_flags = 0;
+
+	switch (rx_mode) {
+	case BNX2X_RX_MODE_NONE:
+		/*
+		 * 'drop all' supersedes any accept flags that may have been
+		 * passed to the function.
+		 */
+		break;
+
+	case BNX2X_RX_MODE_NORMAL:
+		bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+		/* internal switching mode */
+		bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+		break;
+
+	case BNX2X_RX_MODE_ALLMULTI:
+		bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+		/* internal switching mode */
+		bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+		break;
+
+	case BNX2X_RX_MODE_ALLMULTI_PROMISC:
+	case BNX2X_RX_MODE_PROMISC:
+		/*
+		 * According to deffinition of SI mode, iface in promisc mode
+		 * should receive matched and unmatched (in resolution of port)
+		 * unicast packets.
+		 */
+		bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+		/* internal switching mode */
+		bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+		if (IS_MF_SI(sc)) {
+			bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
+		} else {
+			bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+		}
+
+		break;
+
+	default:
+		PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
+		return -1;
+	}
+
+	/* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
+	if (rx_mode != BNX2X_RX_MODE_NONE) {
+		bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
+		bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
+	}
+
+	return 0;
+}
+
+static int
+bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
+		  unsigned long rx_mode_flags,
+		  unsigned long rx_accept_flags,
+		  unsigned long tx_accept_flags, unsigned long ramrod_flags)
+{
+	struct ecore_rx_mode_ramrod_params ramrod_param;
+	int rc;
+
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+	/* Prepare ramrod parameters */
+	ramrod_param.cid = 0;
+	ramrod_param.cl_id = cl_id;
+	ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
+	ramrod_param.func_id = SC_FUNC(sc);
+
+	ramrod_param.pstate = &sc->sp_state;
+	ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
+
+	ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
+	ramrod_param.rdata_mapping =
+	    (rte_iova_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
+	    bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+
+	ramrod_param.ramrod_flags = ramrod_flags;
+	ramrod_param.rx_mode_flags = rx_mode_flags;
+
+	ramrod_param.rx_accept_flags = rx_accept_flags;
+	ramrod_param.tx_accept_flags = tx_accept_flags;
+
+	rc = ecore_config_rx_mode(sc, &ramrod_param);
+	if (rc < 0) {
+		PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
+		return rc;
+	}
+
+	return 0;
+}
+
+int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
+{
+	unsigned long rx_mode_flags = 0, ramrod_flags = 0;
+	unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
+	int rc;
+
+	rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
+				   &tx_accept_flags);
+	if (rc) {
+		return rc;
+	}
+
+	bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
+	bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+
+	return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
+				 rx_accept_flags, tx_accept_flags,
+				 ramrod_flags);
+}
+
+/* returns the "mcp load_code" according to global load_count array */
+static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
+{
+	int path = SC_PATH(sc);
+	int port = SC_PORT(sc);
+
+	PMD_DRV_LOG(INFO, sc, "NO MCP - load counts[%d]      %d, %d, %d",
+		    path, load_count[path][0], load_count[path][1],
+		    load_count[path][2]);
+
+	load_count[path][0]++;
+	load_count[path][1 + port]++;
+	PMD_DRV_LOG(INFO, sc, "NO MCP - new load counts[%d]  %d, %d, %d",
+		    path, load_count[path][0], load_count[path][1],
+		    load_count[path][2]);
+	if (load_count[path][0] == 1)
+		return FW_MSG_CODE_DRV_LOAD_COMMON;
+	else if (load_count[path][1 + port] == 1)
+		return FW_MSG_CODE_DRV_LOAD_PORT;
+	else
+		return FW_MSG_CODE_DRV_LOAD_FUNCTION;
+}
+
+/* returns the "mcp load_code" according to global load_count array */
+static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	int path = SC_PATH(sc);
+
+	PMD_DRV_LOG(INFO, sc, "NO MCP - load counts[%d]      %d, %d, %d",
+		    path, load_count[path][0], load_count[path][1],
+		    load_count[path][2]);
+	load_count[path][0]--;
+	load_count[path][1 + port]--;
+	PMD_DRV_LOG(INFO, sc, "NO MCP - new load counts[%d]  %d, %d, %d",
+		    path, load_count[path][0], load_count[path][1],
+		    load_count[path][2]);
+	if (load_count[path][0] == 0) {
+		return FW_MSG_CODE_DRV_UNLOAD_COMMON;
+	} else if (load_count[path][1 + port] == 0) {
+		return FW_MSG_CODE_DRV_UNLOAD_PORT;
+	} else {
+		return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
+	}
+}
+
+/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
+static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
+{
+	uint32_t reset_code = 0;
+
+	/* Select the UNLOAD request mode */
+	if (unload_mode == UNLOAD_NORMAL) {
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+	} else {
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+	}
+
+	/* Send the request to the MCP */
+	if (!BNX2X_NOMCP(sc)) {
+		reset_code = bnx2x_fw_command(sc, reset_code, 0);
+	} else {
+		reset_code = bnx2x_nic_unload_no_mcp(sc);
+	}
+
+	return reset_code;
+}
+
+/* send UNLOAD_DONE command to the MCP */
+static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
+{
+	uint32_t reset_param =
+	    keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
+
+	/* Report UNLOAD_DONE to MCP */
+	if (!BNX2X_NOMCP(sc)) {
+		bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
+	}
+}
+
+static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
+{
+	int tout = 50;
+
+	if (!sc->port.pmf) {
+		return 0;
+	}
+
+	/*
+	 * (assumption: No Attention from MCP at this stage)
+	 * PMF probably in the middle of TX disable/enable transaction
+	 * 1. Sync IRS for default SB
+	 * 2. Sync SP queue - this guarantees us that attention handling started
+	 * 3. Wait, that TX disable/enable transaction completes
+	 *
+	 * 1+2 guarantee that if DCBX attention was scheduled it already changed
+	 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
+	 * received completion for the transaction the state is TX_STOPPED.
+	 * State will return to STARTED after completion of TX_STOPPED-->STARTED
+	 * transaction.
+	 */
+
+	while (ecore_func_get_state(sc, &sc->func_obj) !=
+	       ECORE_F_STATE_STARTED && tout--) {
+		DELAY(20000);
+	}
+
+	if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
+		/*
+		 * Failed to complete the transaction in a "good way"
+		 * Force both transactions with CLR bit.
+		 */
+		struct ecore_func_state_params func_params = { NULL };
+
+		PMD_DRV_LOG(NOTICE, sc, "Unexpected function state! "
+			    "Forcing STARTED-->TX_STOPPED-->STARTED");
+
+		func_params.f_obj = &sc->func_obj;
+		bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+
+		/* STARTED-->TX_STOPPED */
+		func_params.cmd = ECORE_F_CMD_TX_STOP;
+		ecore_func_state_change(sc, &func_params);
+
+		/* TX_STOPPED-->STARTED */
+		func_params.cmd = ECORE_F_CMD_TX_START;
+		return ecore_func_state_change(sc, &func_params);
+	}
+
+	return 0;
+}
+
+static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
+{
+	struct bnx2x_fastpath *fp = &sc->fp[index];
+	struct ecore_queue_state_params q_params = { NULL };
+	int rc;
+
+	PMD_DRV_LOG(DEBUG, sc, "stopping queue %d cid %d", index, fp->index);
+
+	q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
+	/* We want to wait for completion in this context */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+	/* Stop the primary connection: */
+
+	/* ...halt the connection */
+	q_params.cmd = ECORE_Q_CMD_HALT;
+	rc = ecore_queue_state_change(sc, &q_params);
+	if (rc) {
+		return rc;
+	}
+
+	/* ...terminate the connection */
+	q_params.cmd = ECORE_Q_CMD_TERMINATE;
+	memset(&q_params.params.terminate, 0,
+	       sizeof(q_params.params.terminate));
+	q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
+	rc = ecore_queue_state_change(sc, &q_params);
+	if (rc) {
+		return rc;
+	}
+
+	/* ...delete cfc entry */
+	q_params.cmd = ECORE_Q_CMD_CFC_DEL;
+	memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
+	q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
+	return ecore_queue_state_change(sc, &q_params);
+}
+
+/* wait for the outstanding SP commands */
+static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
+{
+	unsigned long tmp;
+	int tout = 5000;	/* wait for 5 secs tops */
+
+	while (tout--) {
+		mb();
+		if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
+			return TRUE;
+		}
+
+		DELAY(1000);
+	}
+
+	mb();
+
+	tmp = atomic_load_acq_long(&sc->sp_state);
+	if (tmp & mask) {
+		PMD_DRV_LOG(INFO, sc, "Filtering completion timed out: "
+			    "sp_state 0x%lx, mask 0x%lx", tmp, mask);
+		return FALSE;
+	}
+
+	return FALSE;
+}
+
+static int bnx2x_func_stop(struct bnx2x_softc *sc)
+{
+	struct ecore_func_state_params func_params = { NULL };
+	int rc;
+
+	/* prepare parameters for function state transitions */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+	func_params.f_obj = &sc->func_obj;
+	func_params.cmd = ECORE_F_CMD_STOP;
+
+	/*
+	 * Try to stop the function the 'good way'. If it fails (in case
+	 * of a parity error during bnx2x_chip_cleanup()) and we are
+	 * not in a debug mode, perform a state transaction in order to
+	 * enable further HW_RESET transaction.
+	 */
+	rc = ecore_func_state_change(sc, &func_params);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "FUNC_STOP ramrod failed. "
+			    "Running a dry transaction");
+		bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+		return ecore_func_state_change(sc, &func_params);
+	}
+
+	return 0;
+}
+
+static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
+{
+	struct ecore_func_state_params func_params = { NULL };
+
+	/* Prepare parameters for function state transitions */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+	func_params.f_obj = &sc->func_obj;
+	func_params.cmd = ECORE_F_CMD_HW_RESET;
+
+	func_params.params.hw_init.load_phase = load_code;
+
+	return ecore_func_state_change(sc, &func_params);
+}
+
+static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
+{
+	if (disable_hw) {
+		/* prevent the HW from sending interrupts */
+		bnx2x_int_disable(sc);
+	}
+}
+
+static void
+bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
+{
+	int port = SC_PORT(sc);
+	struct ecore_mcast_ramrod_params rparam = { NULL };
+	uint32_t reset_code;
+	int i, rc = 0;
+
+	bnx2x_drain_tx_queues(sc);
+
+	/* give HW time to discard old tx messages */
+	DELAY(1000);
+
+	/* Clean all ETH MACs */
+	rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
+			      FALSE);
+	if (rc < 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to delete all ETH MACs (%d)", rc);
+	}
+
+	/* Clean up UC list  */
+	rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
+			      TRUE);
+	if (rc < 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to delete UC MACs list (%d)", rc);
+	}
+
+	/* Disable LLH */
+	REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
+
+	/* Set "drop all" to stop Rx */
+
+	/*
+	 * We need to take the if_maddr_lock() here in order to prevent
+	 * a race between the completion code and this code.
+	 */
+
+	if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
+		bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
+	} else {
+		bnx2x_set_storm_rx_mode(sc);
+	}
+
+	/* Clean up multicast configuration */
+	rparam.mcast_obj = &sc->mcast_obj;
+	rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
+	if (rc < 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to send DEL MCAST command (%d)", rc);
+	}
+
+	/*
+	 * Send the UNLOAD_REQUEST to the MCP. This will return if
+	 * this function should perform FUNCTION, PORT, or COMMON HW
+	 * reset.
+	 */
+	reset_code = bnx2x_send_unload_req(sc, unload_mode);
+
+	/*
+	 * (assumption: No Attention from MCP at this stage)
+	 * PMF probably in the middle of TX disable/enable transaction
+	 */
+	rc = bnx2x_func_wait_started(sc);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "bnx2x_func_wait_started failed");
+	}
+
+	/*
+	 * Close multi and leading connections
+	 * Completions for ramrods are collected in a synchronous way
+	 */
+	for (i = 0; i < sc->num_queues; i++) {
+		if (bnx2x_stop_queue(sc, i)) {
+			goto unload_error;
+		}
+	}
+
+	/*
+	 * If SP settings didn't get completed so far - something
+	 * very wrong has happen.
+	 */
+	if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
+		PMD_DRV_LOG(NOTICE, sc, "Common slow path ramrods got stuck!");
+	}
+
+unload_error:
+
+	rc = bnx2x_func_stop(sc);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Function stop failed!");
+	}
+
+	/* disable HW interrupts */
+	bnx2x_int_disable_sync(sc, TRUE);
+
+	/* Reset the chip */
+	rc = bnx2x_reset_hw(sc, reset_code);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Hardware reset failed");
+	}
+
+	/* Report UNLOAD_DONE to MCP */
+	bnx2x_send_unload_done(sc, keep_link);
+}
+
+static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+
+	PMD_DRV_LOG(DEBUG, sc, "Disabling 'close the gates'");
+
+	val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
+	val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
+		 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
+	REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
+}
+
+/*
+ * Cleans the object that have internal lists without sending
+ * ramrods. Should be run when interrutps are disabled.
+ */
+static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
+{
+	unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+	struct ecore_mcast_ramrod_params rparam = { NULL };
+	struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
+	int rc;
+
+	/* Cleanup MACs' object first... */
+
+	/* Wait for completion of requested */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	/* Perform a dry cleanup */
+	bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
+
+	/* Clean ETH primary MAC */
+	bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
+	rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
+				 &ramrod_flags);
+	if (rc != 0) {
+		PMD_DRV_LOG(NOTICE, sc, "Failed to clean ETH MACs (%d)", rc);
+	}
+
+	/* Cleanup UC list */
+	vlan_mac_flags = 0;
+	bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
+	rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
+	if (rc != 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to clean UC list MACs (%d)", rc);
+	}
+
+	/* Now clean mcast object... */
+
+	rparam.mcast_obj = &sc->mcast_obj;
+	bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
+
+	/* Add a DEL command... */
+	rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
+	if (rc < 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to send DEL MCAST command (%d)", rc);
+	}
+
+	/* now wait until all pending commands are cleared */
+
+	rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+	while (rc != 0) {
+		if (rc < 0) {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "Failed to clean MCAST object (%d)", rc);
+			return;
+		}
+
+		rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+	}
+}
+
+/* stop the controller */
+__rte_noinline
+int
+bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
+{
+	uint8_t global = FALSE;
+	uint32_t val;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	PMD_DRV_LOG(DEBUG, sc, "Starting NIC unload...");
+
+	/* mark driver as unloaded in shmem2 */
+	if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
+		val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
+		SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
+			  val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
+	}
+
+	if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
+	    (sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
+		/*
+		 * We can get here if the driver has been unloaded
+		 * during parity error recovery and is either waiting for a
+		 * leader to complete or for other functions to unload and
+		 * then ifconfig down has been issued. In this case we want to
+		 * unload and let other functions to complete a recovery
+		 * process.
+		 */
+		sc->recovery_state = BNX2X_RECOVERY_DONE;
+		sc->is_leader = 0;
+		bnx2x_release_leader_lock(sc);
+		mb();
+
+		PMD_DRV_LOG(NOTICE, sc, "Can't unload in closed or error state");
+		return -1;
+	}
+
+	/*
+	 * Nothing to do during unload if previous bnx2x_nic_load()
+	 * did not completed successfully - all resourses are released.
+	 */
+	if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
+		return 0;
+	}
+
+	sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
+	mb();
+
+	sc->rx_mode = BNX2X_RX_MODE_NONE;
+	bnx2x_set_rx_mode(sc);
+	mb();
+
+	if (IS_PF(sc)) {
+		/* set ALWAYS_ALIVE bit in shmem */
+		sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+
+		bnx2x_drv_pulse(sc);
+
+		bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+		bnx2x_save_statistics(sc);
+	}
+
+	/* wait till consumers catch up with producers in all queues */
+	bnx2x_drain_tx_queues(sc);
+
+	/* if VF indicate to PF this function is going down (PF will delete sp
+	 * elements and clear initializations
+	 */
+	if (IS_VF(sc)) {
+		bnx2x_vf_unload(sc);
+	} else if (unload_mode != UNLOAD_RECOVERY) {
+		/* if this is a normal/close unload need to clean up chip */
+		bnx2x_chip_cleanup(sc, unload_mode, keep_link);
+	} else {
+		/* Send the UNLOAD_REQUEST to the MCP */
+		bnx2x_send_unload_req(sc, unload_mode);
+
+		/*
+		 * Prevent transactions to host from the functions on the
+		 * engine that doesn't reset global blocks in case of global
+		 * attention once gloabl blocks are reset and gates are opened
+		 * (the engine which leader will perform the recovery
+		 * last).
+		 */
+		if (!CHIP_IS_E1x(sc)) {
+			bnx2x_pf_disable(sc);
+		}
+
+		/* disable HW interrupts */
+		bnx2x_int_disable_sync(sc, TRUE);
+
+		/* Report UNLOAD_DONE to MCP */
+		bnx2x_send_unload_done(sc, FALSE);
+	}
+
+	/*
+	 * At this stage no more interrupts will arrive so we may safely clean
+	 * the queue'able objects here in case they failed to get cleaned so far.
+	 */
+	if (IS_PF(sc)) {
+		bnx2x_squeeze_objects(sc);
+	}
+
+	/* There should be no more pending SP commands at this stage */
+	sc->sp_state = 0;
+
+	sc->port.pmf = 0;
+
+	if (IS_PF(sc)) {
+		bnx2x_free_mem(sc);
+	}
+
+	/* free the host hardware/software hsi structures */
+	bnx2x_free_hsi_mem(sc);
+
+	bnx2x_free_fw_stats_mem(sc);
+
+	sc->state = BNX2X_STATE_CLOSED;
+
+	/*
+	 * Check if there are pending parity attentions. If there are - set
+	 * RECOVERY_IN_PROGRESS.
+	 */
+	if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
+		bnx2x_set_reset_in_progress(sc);
+
+		/* Set RESET_IS_GLOBAL if needed */
+		if (global) {
+			bnx2x_set_reset_global(sc);
+		}
+	}
+
+	/*
+	 * The last driver must disable a "close the gate" if there is no
+	 * parity attention or "process kill" pending.
+	 */
+	if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
+	    bnx2x_reset_is_done(sc, SC_PATH(sc))) {
+		bnx2x_disable_close_the_gate(sc);
+	}
+
+	PMD_DRV_LOG(DEBUG, sc, "Ended NIC unload");
+
+	return 0;
+}
+
+/*
+ * Encapsulte an mbuf cluster into the tx bd chain and makes the memory
+ * visible to the controller.
+ *
+ * If an mbuf is submitted to this routine and cannot be given to the
+ * controller (e.g. it has too many fragments) then the function may free
+ * the mbuf and return to the caller.
+ *
+ * Returns:
+ *     int: Number of TX BDs used for the mbuf
+ *
+ *   Note the side effect that an mbuf may be freed if it causes a problem.
+ */
+int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf *m0)
+{
+	struct eth_tx_start_bd *tx_start_bd;
+	uint16_t bd_prod, pkt_prod;
+	struct bnx2x_softc *sc;
+	uint32_t nbds = 0;
+
+	sc = txq->sc;
+	bd_prod = txq->tx_bd_tail;
+	pkt_prod = txq->tx_pkt_tail;
+
+	txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;
+
+	tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;
+
+	tx_start_bd->addr_lo =
+	    rte_cpu_to_le_32(U64_LO(rte_mbuf_data_iova(m0)));
+	tx_start_bd->addr_hi =
+	    rte_cpu_to_le_32(U64_HI(rte_mbuf_data_iova(m0)));
+	tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
+	tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+	tx_start_bd->general_data =
+	    (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
+
+	tx_start_bd->nbd = rte_cpu_to_le_16(2);
+
+	if (m0->ol_flags & PKT_TX_VLAN_PKT) {
+		tx_start_bd->vlan_or_ethertype =
+		    rte_cpu_to_le_16(m0->vlan_tci);
+		tx_start_bd->bd_flags.as_bitfield |=
+		    (X_ETH_OUTBAND_VLAN <<
+		     ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+	} else {
+		if (IS_PF(sc))
+			tx_start_bd->vlan_or_ethertype =
+			    rte_cpu_to_le_16(pkt_prod);
+		else {
+			/* when transmitting in a vf, start bd
+			 * must hold the ethertype for fw to enforce it
+			 */
+			struct rte_ether_hdr *eh =
+			    rte_pktmbuf_mtod(m0, struct rte_ether_hdr *);
+
+			/* Still need to consider inband vlan for enforced */
+			if (eh->ether_type ==
+					rte_cpu_to_be_16(RTE_ETHER_TYPE_VLAN)) {
+				struct rte_vlan_hdr *vh =
+					(struct rte_vlan_hdr *)(eh + 1);
+				tx_start_bd->bd_flags.as_bitfield |=
+					(X_ETH_INBAND_VLAN <<
+					ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+				tx_start_bd->vlan_or_ethertype =
+					rte_cpu_to_le_16(ntohs(vh->vlan_tci));
+			} else {
+				tx_start_bd->vlan_or_ethertype =
+					(rte_cpu_to_le_16
+					(rte_be_to_cpu_16(eh->ether_type)));
+			}
+		}
+	}
+
+	bd_prod = NEXT_TX_BD(bd_prod);
+	if (IS_VF(sc)) {
+		struct eth_tx_parse_bd_e2 *tx_parse_bd;
+		const struct rte_ether_hdr *eh =
+		    rte_pktmbuf_mtod(m0, struct rte_ether_hdr *);
+		uint8_t mac_type = UNICAST_ADDRESS;
+
+		tx_parse_bd =
+		    &txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
+		if (rte_is_multicast_ether_addr(&eh->d_addr)) {
+			if (rte_is_broadcast_ether_addr(&eh->d_addr))
+				mac_type = BROADCAST_ADDRESS;
+			else
+				mac_type = MULTICAST_ADDRESS;
+		}
+		tx_parse_bd->parsing_data =
+		    (mac_type << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);
+
+		rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
+			   &eh->d_addr.addr_bytes[0], 2);
+		rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
+			   &eh->d_addr.addr_bytes[2], 2);
+		rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
+			   &eh->d_addr.addr_bytes[4], 2);
+		rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
+			   &eh->s_addr.addr_bytes[0], 2);
+		rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
+			   &eh->s_addr.addr_bytes[2], 2);
+		rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
+			   &eh->s_addr.addr_bytes[4], 2);
+
+		tx_parse_bd->data.mac_addr.dst_hi =
+		    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
+		tx_parse_bd->data.mac_addr.dst_mid =
+		    rte_cpu_to_be_16(tx_parse_bd->data.
+				     mac_addr.dst_mid);
+		tx_parse_bd->data.mac_addr.dst_lo =
+		    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
+		tx_parse_bd->data.mac_addr.src_hi =
+		    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
+		tx_parse_bd->data.mac_addr.src_mid =
+		    rte_cpu_to_be_16(tx_parse_bd->data.
+				     mac_addr.src_mid);
+		tx_parse_bd->data.mac_addr.src_lo =
+		    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);
+
+		PMD_TX_LOG(DEBUG,
+			   "PBD dst %x %x %x src %x %x %x p_data %x",
+			   tx_parse_bd->data.mac_addr.dst_hi,
+			   tx_parse_bd->data.mac_addr.dst_mid,
+			   tx_parse_bd->data.mac_addr.dst_lo,
+			   tx_parse_bd->data.mac_addr.src_hi,
+			   tx_parse_bd->data.mac_addr.src_mid,
+			   tx_parse_bd->data.mac_addr.src_lo,
+			   tx_parse_bd->parsing_data);
+	}
+
+	PMD_TX_LOG(DEBUG,
+		   "start bd: nbytes %d flags %x vlan %x",
+		   tx_start_bd->nbytes,
+		   tx_start_bd->bd_flags.as_bitfield,
+		   tx_start_bd->vlan_or_ethertype);
+
+	bd_prod = NEXT_TX_BD(bd_prod);
+	pkt_prod++;
+
+	if (TX_IDX(bd_prod) < 2)
+		nbds++;
+
+	txq->nb_tx_avail -= 2;
+	txq->tx_bd_tail = bd_prod;
+	txq->tx_pkt_tail = pkt_prod;
+
+	return nbds + 2;
+}
+
+static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
+{
+	return L2_ILT_LINES(sc);
+}
+
+static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
+{
+	struct ilt_client_info *ilt_client;
+	struct ecore_ilt *ilt = sc->ilt;
+	uint16_t line = 0;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
+
+	/* CDU */
+	ilt_client = &ilt->clients[ILT_CLIENT_CDU];
+	ilt_client->client_num = ILT_CLIENT_CDU;
+	ilt_client->page_size = CDU_ILT_PAGE_SZ;
+	ilt_client->flags = ILT_CLIENT_SKIP_MEM;
+	ilt_client->start = line;
+	line += bnx2x_cid_ilt_lines(sc);
+
+	if (CNIC_SUPPORT(sc)) {
+		line += CNIC_ILT_LINES;
+	}
+
+	ilt_client->end = (line - 1);
+
+	/* QM */
+	if (QM_INIT(sc->qm_cid_count)) {
+		ilt_client = &ilt->clients[ILT_CLIENT_QM];
+		ilt_client->client_num = ILT_CLIENT_QM;
+		ilt_client->page_size = QM_ILT_PAGE_SZ;
+		ilt_client->flags = 0;
+		ilt_client->start = line;
+
+		/* 4 bytes for each cid */
+		line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
+				     QM_ILT_PAGE_SZ);
+
+		ilt_client->end = (line - 1);
+	}
+
+	if (CNIC_SUPPORT(sc)) {
+		/* SRC */
+		ilt_client = &ilt->clients[ILT_CLIENT_SRC];
+		ilt_client->client_num = ILT_CLIENT_SRC;
+		ilt_client->page_size = SRC_ILT_PAGE_SZ;
+		ilt_client->flags = 0;
+		ilt_client->start = line;
+		line += SRC_ILT_LINES;
+		ilt_client->end = (line - 1);
+
+		/* TM */
+		ilt_client = &ilt->clients[ILT_CLIENT_TM];
+		ilt_client->client_num = ILT_CLIENT_TM;
+		ilt_client->page_size = TM_ILT_PAGE_SZ;
+		ilt_client->flags = 0;
+		ilt_client->start = line;
+		line += TM_ILT_LINES;
+		ilt_client->end = (line - 1);
+	}
+
+	assert((line <= ILT_MAX_LINES));
+}
+
+static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
+{
+	int i;
+
+	for (i = 0; i < sc->num_queues; i++) {
+		/* get the Rx buffer size for RX frames */
+		sc->fp[i].rx_buf_size =
+		    (IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
+	}
+}
+
+int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
+{
+
+	sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);
+
+	return sc->ilt == NULL;
+}
+
+static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
+{
+	sc->ilt->lines = rte_calloc("",
+				    sizeof(struct ilt_line), ILT_MAX_LINES,
+				    RTE_CACHE_LINE_SIZE);
+	return sc->ilt->lines == NULL;
+}
+
+void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
+{
+	rte_free(sc->ilt);
+	sc->ilt = NULL;
+}
+
+static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
+{
+	if (sc->ilt->lines != NULL) {
+		rte_free(sc->ilt->lines);
+		sc->ilt->lines = NULL;
+	}
+}
+
+static void bnx2x_free_mem(struct bnx2x_softc *sc)
+{
+	uint32_t i;
+
+	for (i = 0; i < L2_ILT_LINES(sc); i++) {
+		sc->context[i].vcxt = NULL;
+		sc->context[i].size = 0;
+	}
+
+	ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
+
+	bnx2x_free_ilt_lines_mem(sc);
+}
+
+static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
+{
+	int context_size;
+	int allocated;
+	int i;
+	char cdu_name[RTE_MEMZONE_NAMESIZE];
+
+	/*
+	 * Allocate memory for CDU context:
+	 * This memory is allocated separately and not in the generic ILT
+	 * functions because CDU differs in few aspects:
+	 * 1. There can be multiple entities allocating memory for context -
+	 * regular L2, CNIC, and SRIOV drivers. Each separately controls
+	 * its own ILT lines.
+	 * 2. Since CDU page-size is not a single 4KB page (which is the case
+	 * for the other ILT clients), to be efficient we want to support
+	 * allocation of sub-page-size in the last entry.
+	 * 3. Context pointers are used by the driver to pass to FW / update
+	 * the context (for the other ILT clients the pointers are used just to
+	 * free the memory during unload).
+	 */
+	context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
+	for (i = 0, allocated = 0; allocated < context_size; i++) {
+		sc->context[i].size = min(CDU_ILT_PAGE_SZ,
+					  (context_size - allocated));
+
+		snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
+		if (bnx2x_dma_alloc(sc, sc->context[i].size,
+				  &sc->context[i].vcxt_dma,
+				  cdu_name, BNX2X_PAGE_SIZE) != 0) {
+			bnx2x_free_mem(sc);
+			return -1;
+		}
+
+		sc->context[i].vcxt =
+		    (union cdu_context *)sc->context[i].vcxt_dma.vaddr;
+
+		allocated += sc->context[i].size;
+	}
+
+	bnx2x_alloc_ilt_lines_mem(sc);
+
+	if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
+		PMD_DRV_LOG(NOTICE, sc, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
+		bnx2x_free_mem(sc);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
+{
+	bnx2x_dma_free(&sc->fw_stats_dma);
+	sc->fw_stats_num = 0;
+
+	sc->fw_stats_req_size = 0;
+	sc->fw_stats_req = NULL;
+	sc->fw_stats_req_mapping = 0;
+
+	sc->fw_stats_data_size = 0;
+	sc->fw_stats_data = NULL;
+	sc->fw_stats_data_mapping = 0;
+}
+
+static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
+{
+	uint8_t num_queue_stats;
+	int num_groups, vf_headroom = 0;
+
+	/* number of queues for statistics is number of eth queues */
+	num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);
+
+	/*
+	 * Total number of FW statistics requests =
+	 *   1 for port stats + 1 for PF stats + num of queues
+	 */
+	sc->fw_stats_num = (2 + num_queue_stats);
+
+	/*
+	 * Request is built from stats_query_header and an array of
+	 * stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
+	 * rules. The real number or requests is configured in the
+	 * stats_query_header.
+	 */
+	num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
+	if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
+		num_groups++;
+
+	sc->fw_stats_req_size =
+	    (sizeof(struct stats_query_header) +
+	     (num_groups * sizeof(struct stats_query_cmd_group)));
+
+	/*
+	 * Data for statistics requests + stats_counter.
+	 * stats_counter holds per-STORM counters that are incremented when
+	 * STORM has finished with the current request. Memory for FCoE
+	 * offloaded statistics are counted anyway, even if they will not be sent.
+	 * VF stats are not accounted for here as the data of VF stats is stored
+	 * in memory allocated by the VF, not here.
+	 */
+	sc->fw_stats_data_size =
+	    (sizeof(struct stats_counter) +
+	     sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
+	     /* sizeof(struct fcoe_statistics_params) + */
+	     (sizeof(struct per_queue_stats) * num_queue_stats));
+
+	if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
+			  &sc->fw_stats_dma, "fw_stats",
+			  RTE_CACHE_LINE_SIZE) != 0) {
+		bnx2x_free_fw_stats_mem(sc);
+		return -1;
+	}
+
+	/* set up the shortcuts */
+
+	sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
+	sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
+
+	sc->fw_stats_data =
+	    (struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
+					 sc->fw_stats_req_size);
+	sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
+				     sc->fw_stats_req_size);
+
+	return 0;
+}
+
+/*
+ * Bits map:
+ * 0-7  - Engine0 load counter.
+ * 8-15 - Engine1 load counter.
+ * 16   - Engine0 RESET_IN_PROGRESS bit.
+ * 17   - Engine1 RESET_IN_PROGRESS bit.
+ * 18   - Engine0 ONE_IS_LOADED. Set when there is at least one active
+ *        function on the engine
+ * 19   - Engine1 ONE_IS_LOADED.
+ * 20   - Chip reset flow bit. When set none-leader must wait for both engines
+ *        leader to complete (check for both RESET_IN_PROGRESS bits and not
+ *        for just the one belonging to its engine).
+ */
+#define BNX2X_RECOVERY_GLOB_REG     MISC_REG_GENERIC_POR_1
+#define BNX2X_PATH0_LOAD_CNT_MASK   0x000000ff
+#define BNX2X_PATH0_LOAD_CNT_SHIFT  0
+#define BNX2X_PATH1_LOAD_CNT_MASK   0x0000ff00
+#define BNX2X_PATH1_LOAD_CNT_SHIFT  8
+#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
+#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
+#define BNX2X_GLOBAL_RESET_BIT      0x00040000
+
+/* set the GLOBAL_RESET bit, should be run under rtnl lock */
+static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
+static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
+static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
+{
+	return REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT;
+}
+
+/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
+static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
+	    BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+	/* Clear the bit */
+	val &= ~bit;
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
+static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
+	    BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+	/* Set the bit */
+	val |= bit;
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
+static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
+{
+	uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+	uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
+	    BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	/* return false if bit is set */
+	return (val & bit) ? FALSE : TRUE;
+}
+
+/* get the load status for an engine, should be run under rtnl lock */
+static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
+{
+	uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
+	    BNX2X_PATH0_LOAD_CNT_MASK;
+	uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+	    BNX2X_PATH0_LOAD_CNT_SHIFT;
+	uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+	val = ((val & mask) >> shift);
+
+	return val != 0;
+}
+
+/* set pf load mark */
+static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	uint32_t val1;
+	uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
+	    BNX2X_PATH0_LOAD_CNT_MASK;
+	uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+	    BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+	/* get the current counter value */
+	val1 = ((val & mask) >> shift);
+
+	/* set bit of this PF */
+	val1 |= (1 << SC_ABS_FUNC(sc));
+
+	/* clear the old value */
+	val &= ~mask;
+
+	/* set the new one */
+	val |= ((val1 << shift) & mask);
+
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* clear pf load mark */
+static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
+{
+	uint32_t val1, val;
+	uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
+	    BNX2X_PATH0_LOAD_CNT_MASK;
+	uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+	    BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+	val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+	/* get the current counter value */
+	val1 = (val & mask) >> shift;
+
+	/* clear bit of that PF */
+	val1 &= ~(1 << SC_ABS_FUNC(sc));
+
+	/* clear the old value */
+	val &= ~mask;
+
+	/* set the new one */
+	val |= ((val1 << shift) & mask);
+
+	REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+	return val1 != 0;
+}
+
+/* send load requrest to mcp and analyze response */
+static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
+{
+	PMD_INIT_FUNC_TRACE(sc);
+
+	/* init fw_seq */
+	sc->fw_seq =
+	    (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
+	     DRV_MSG_SEQ_NUMBER_MASK);
+
+	PMD_DRV_LOG(DEBUG, sc, "initial fw_seq 0x%04x", sc->fw_seq);
+
+#ifdef BNX2X_PULSE
+	/* get the current FW pulse sequence */
+	sc->fw_drv_pulse_wr_seq =
+	    (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
+	     DRV_PULSE_SEQ_MASK);
+#else
+	/* set ALWAYS_ALIVE bit in shmem */
+	sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+	bnx2x_drv_pulse(sc);
+#endif
+
+	/* load request */
+	(*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
+				      DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+
+	/* if the MCP fails to respond we must abort */
+	if (!(*load_code)) {
+		PMD_DRV_LOG(NOTICE, sc, "MCP response failure!");
+		return -1;
+	}
+
+	/* if MCP refused then must abort */
+	if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+		PMD_DRV_LOG(NOTICE, sc, "MCP refused load request");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Check whether another PF has already loaded FW to chip. In virtualized
+ * environments a pf from anoth VM may have already initialized the device
+ * including loading FW.
+ */
+static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
+{
+	uint32_t my_fw, loaded_fw;
+
+	/* is another pf loaded on this engine? */
+	if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
+	    (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
+		/* build my FW version dword */
+		my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
+			 (BNX2X_5710_FW_MINOR_VERSION << 8) +
+			 (BNX2X_5710_FW_REVISION_VERSION << 16) +
+			 (BNX2X_5710_FW_ENGINEERING_VERSION << 24));
+
+		/* read loaded FW from chip */
+		loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
+		PMD_DRV_LOG(DEBUG, sc, "loaded FW 0x%08x / my FW 0x%08x",
+			    loaded_fw, my_fw);
+
+		/* abort nic load if version mismatch */
+		if (my_fw != loaded_fw) {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "FW 0x%08x already loaded (mine is 0x%08x)",
+				    loaded_fw, my_fw);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+/* mark PMF if applicable */
+static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
+{
+	uint32_t ncsi_oem_data_addr;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+	    (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
+	    (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
+		/*
+		 * Barrier here for ordering between the writing to sc->port.pmf here
+		 * and reading it from the periodic task.
+		 */
+		sc->port.pmf = 1;
+		mb();
+	} else {
+		sc->port.pmf = 0;
+	}
+
+	PMD_DRV_LOG(DEBUG, sc, "pmf %d", sc->port.pmf);
+
+	if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
+		if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
+			ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
+			if (ncsi_oem_data_addr) {
+				REG_WR(sc,
+				       (ncsi_oem_data_addr +
+					offsetof(struct glob_ncsi_oem_data,
+						 driver_version)), 0);
+			}
+		}
+	}
+}
+
+static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
+{
+	int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
+	int abs_func;
+	int vn;
+
+	if (BNX2X_NOMCP(sc)) {
+		return;		/* what should be the default bvalue in this case */
+	}
+
+	/*
+	 * The formula for computing the absolute function number is...
+	 * For 2 port configuration (4 functions per port):
+	 *   abs_func = 2 * vn + SC_PORT + SC_PATH
+	 * For 4 port configuration (2 functions per port):
+	 *   abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
+	 */
+	for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+		abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
+		if (abs_func >= E1H_FUNC_MAX) {
+			break;
+		}
+		sc->devinfo.mf_info.mf_config[vn] =
+		    MFCFG_RD(sc, func_mf_config[abs_func].config);
+	}
+
+	if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
+	    FUNC_MF_CFG_FUNC_DISABLED) {
+		PMD_DRV_LOG(DEBUG, sc, "mf_cfg function disabled");
+		sc->flags |= BNX2X_MF_FUNC_DIS;
+	} else {
+		PMD_DRV_LOG(DEBUG, sc, "mf_cfg function enabled");
+		sc->flags &= ~BNX2X_MF_FUNC_DIS;
+	}
+}
+
+/* acquire split MCP access lock register */
+static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
+{
+	uint32_t j, val;
+
+	for (j = 0; j < 1000; j++) {
+		val = (1UL << 31);
+		REG_WR(sc, GRCBASE_MCP + 0x9c, val);
+		val = REG_RD(sc, GRCBASE_MCP + 0x9c);
+		if (val & (1L << 31))
+			break;
+
+		DELAY(5000);
+	}
+
+	if (!(val & (1L << 31))) {
+		PMD_DRV_LOG(NOTICE, sc, "Cannot acquire MCP access lock register");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x_softc *sc)
+{
+	REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
+}
+
+static void bnx2x_fan_failure(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	uint32_t ext_phy_config;
+
+	/* mark the failure */
+	ext_phy_config =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
+
+	ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+	ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+	SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
+		 ext_phy_config);
+
+	/* log the failure */
+	PMD_DRV_LOG(INFO, sc,
+		    "Fan Failure has caused the driver to shutdown "
+		    "the card to prevent permanent damage. "
+		    "Please contact OEM Support for assistance");
+
+	rte_panic("Schedule task to handle fan failure");
+}
+
+/* this function is called upon a link interrupt */
+static void bnx2x_link_attn(struct bnx2x_softc *sc)
+{
+	uint32_t pause_enabled = 0;
+	struct host_port_stats *pstats;
+	int cmng_fns;
+
+	/* Make sure that we are synced with the current statistics */
+	bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+
+	elink_link_update(&sc->link_params, &sc->link_vars);
+
+	if (sc->link_vars.link_up) {
+
+		/* dropless flow control */
+		if (sc->dropless_fc) {
+			pause_enabled = 0;
+
+			if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
+				pause_enabled = 1;
+			}
+
+			REG_WR(sc,
+			       (BAR_USTRORM_INTMEM +
+				USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
+			       pause_enabled);
+		}
+
+		if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
+			pstats = BNX2X_SP(sc, port_stats);
+			/* reset old mac stats */
+			memset(&(pstats->mac_stx[0]), 0,
+			       sizeof(struct mac_stx));
+		}
+
+		if (sc->state == BNX2X_STATE_OPEN) {
+			bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+		}
+	}
+
+	if (sc->link_vars.link_up && sc->link_vars.line_speed) {
+		cmng_fns = bnx2x_get_cmng_fns_mode(sc);
+
+		if (cmng_fns != CMNG_FNS_NONE) {
+			bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
+			storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+		}
+	}
+
+	bnx2x_link_report_locked(sc);
+
+	if (IS_MF(sc)) {
+		bnx2x_link_sync_notify(sc);
+	}
+}
+
+static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
+{
+	int port = SC_PORT(sc);
+	uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+	    MISC_REG_AEU_MASK_ATTN_FUNC_0;
+	uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+	    NIG_REG_MASK_INTERRUPT_PORT0;
+	uint32_t aeu_mask;
+	uint32_t nig_mask = 0;
+	uint32_t reg_addr;
+	uint32_t igu_acked;
+	uint32_t cnt;
+
+	if (sc->attn_state & asserted) {
+		PMD_DRV_LOG(ERR, sc, "IGU ERROR attn=0x%08x", asserted);
+	}
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	aeu_mask = REG_RD(sc, aeu_addr);
+
+	aeu_mask &= ~(asserted & 0x3ff);
+
+	REG_WR(sc, aeu_addr, aeu_mask);
+
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	sc->attn_state |= asserted;
+
+	if (asserted & ATTN_HARD_WIRED_MASK) {
+		if (asserted & ATTN_NIG_FOR_FUNC) {
+
+			bnx2x_acquire_phy_lock(sc);
+			/* save nig interrupt mask */
+			nig_mask = REG_RD(sc, nig_int_mask_addr);
+
+			/* If nig_mask is not set, no need to call the update function */
+			if (nig_mask) {
+				REG_WR(sc, nig_int_mask_addr, 0);
+
+				bnx2x_link_attn(sc);
+			}
+
+			/* handle unicore attn? */
+		}
+
+		if (asserted & ATTN_SW_TIMER_4_FUNC) {
+			PMD_DRV_LOG(DEBUG, sc, "ATTN_SW_TIMER_4_FUNC!");
+		}
+
+		if (asserted & GPIO_2_FUNC) {
+			PMD_DRV_LOG(DEBUG, sc, "GPIO_2_FUNC!");
+		}
+
+		if (asserted & GPIO_3_FUNC) {
+			PMD_DRV_LOG(DEBUG, sc, "GPIO_3_FUNC!");
+		}
+
+		if (asserted & GPIO_4_FUNC) {
+			PMD_DRV_LOG(DEBUG, sc, "GPIO_4_FUNC!");
+		}
+
+		if (port == 0) {
+			if (asserted & ATTN_GENERAL_ATTN_1) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_1!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_2) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_2!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_3) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_3!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
+			}
+		} else {
+			if (asserted & ATTN_GENERAL_ATTN_4) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_4!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_5) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_5!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_6) {
+				PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_6!");
+				REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
+			}
+		}
+	}
+	/* hardwired */
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		reg_addr =
+		    (HC_REG_COMMAND_REG + port * 32 +
+		     COMMAND_REG_ATTN_BITS_SET);
+	} else {
+		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
+	}
+
+	PMD_DRV_LOG(DEBUG, sc, "about to mask 0x%08x at %s addr 0x%08x",
+		    asserted,
+		    (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
+		    reg_addr);
+	REG_WR(sc, reg_addr, asserted);
+
+	/* now set back the mask */
+	if (asserted & ATTN_NIG_FOR_FUNC) {
+		/*
+		 * Verify that IGU ack through BAR was written before restoring
+		 * NIG mask. This loop should exit after 2-3 iterations max.
+		 */
+		if (sc->devinfo.int_block != INT_BLOCK_HC) {
+			cnt = 0;
+
+			do {
+				igu_acked =
+				    REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
+			} while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
+				 && (++cnt < MAX_IGU_ATTN_ACK_TO));
+
+			if (!igu_acked) {
+				PMD_DRV_LOG(ERR, sc,
+					    "Failed to verify IGU ack on time");
+			}
+
+			mb();
+		}
+
+		REG_WR(sc, nig_int_mask_addr, nig_mask);
+
+		bnx2x_release_phy_lock(sc);
+	}
+}
+
+static void
+bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
+		     __rte_unused const char *blk)
+{
+	PMD_DRV_LOG(INFO, sc, "%s%s", idx ? ", " : "", blk);
+}
+
+static int
+bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+			      uint8_t print)
+{
+	uint32_t cur_bit = 0;
+	int i = 0;
+
+	for (i = 0; sig; i++) {
+		cur_bit = ((uint32_t) 0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "BRB");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "PARSER");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "TSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "SEARCHER");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "TCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "TSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "XPB");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+			      uint8_t * global, uint8_t print)
+{
+	int i = 0;
+	uint32_t cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((uint32_t) 0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "PBF");
+				break;
+			case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "QM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "TM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "XSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "XCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "XSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "DOORBELLQ");
+				break;
+			case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "NIG");
+				break;
+			case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "VAUX PCI CORE");
+				*global = TRUE;
+				break;
+			case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "DEBUG");
+				break;
+			case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "USDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "UCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "USEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "UPB");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "CSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "CCM");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+			      uint8_t print)
+{
+	uint32_t cur_bit = 0;
+	int i = 0;
+
+	for (i = 0; sig; i++) {
+		cur_bit = ((uint32_t) 0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "CSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "PXP");
+				break;
+			case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "PXPPCICLOCKCLIENT");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "CFC");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "CDU");
+				break;
+			case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "DMAE");
+				break;
+			case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "IGU");
+				break;
+			case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "MISC");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+			      uint8_t * global, uint8_t print)
+{
+	uint32_t cur_bit = 0;
+	int i = 0;
+
+	for (i = 0; sig; i++) {
+		cur_bit = ((uint32_t) 0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "MCP ROM");
+				*global = TRUE;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "MCP UMP RX");
+				*global = TRUE;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "MCP UMP TX");
+				*global = TRUE;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "MCP SCPAD");
+				*global = TRUE;
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+			      uint8_t print)
+{
+	uint32_t cur_bit = 0;
+	int i = 0;
+
+	for (i = 0; sig; i++) {
+		cur_bit = ((uint32_t) 0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "PGLUE_B");
+				break;
+			case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
+				if (print)
+					bnx2x_print_next_block(sc, par_num++,
+							     "ATC");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static uint8_t
+bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
+		uint32_t * sig)
+{
+	int par_num = 0;
+
+	if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
+	    (sig[1] & HW_PRTY_ASSERT_SET_1) ||
+	    (sig[2] & HW_PRTY_ASSERT_SET_2) ||
+	    (sig[3] & HW_PRTY_ASSERT_SET_3) ||
+	    (sig[4] & HW_PRTY_ASSERT_SET_4)) {
+		PMD_DRV_LOG(ERR, sc,
+			    "Parity error: HW block parity attention:"
+			    "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
+			    (uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
+			    (uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
+			    (uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
+			    (uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
+			    (uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));
+
+		if (print)
+			PMD_DRV_LOG(INFO, sc, "Parity errors detected in blocks: ");
+
+		par_num =
+		    bnx2x_check_blocks_with_parity0(sc, sig[0] &
+						  HW_PRTY_ASSERT_SET_0,
+						  par_num, print);
+		par_num =
+		    bnx2x_check_blocks_with_parity1(sc, sig[1] &
+						  HW_PRTY_ASSERT_SET_1,
+						  par_num, global, print);
+		par_num =
+		    bnx2x_check_blocks_with_parity2(sc, sig[2] &
+						  HW_PRTY_ASSERT_SET_2,
+						  par_num, print);
+		par_num =
+		    bnx2x_check_blocks_with_parity3(sc, sig[3] &
+						  HW_PRTY_ASSERT_SET_3,
+						  par_num, global, print);
+		par_num =
+		    bnx2x_check_blocks_with_parity4(sc, sig[4] &
+						  HW_PRTY_ASSERT_SET_4,
+						  par_num, print);
+
+		if (print)
+			PMD_DRV_LOG(INFO, sc, "");
+
+		return TRUE;
+	}
+
+	return FALSE;
+}
+
+static uint8_t
+bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
+{
+	struct attn_route attn = { {0} };
+	int port = SC_PORT(sc);
+
+	attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
+	attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
+	attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
+	attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
+
+	if (!CHIP_IS_E1x(sc))
+		attn.sig[4] =
+		    REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
+
+	return bnx2x_parity_attn(sc, global, print, attn.sig);
+}
+
+static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
+{
+	uint32_t val;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
+		val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
+		PMD_DRV_LOG(INFO, sc, "ERROR: PGLUE hw attention 0x%08x", val);
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
+		if (val &
+		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
+		if (val &
+		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
+	}
+
+	if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
+		val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
+		PMD_DRV_LOG(INFO, sc, "ERROR: ATC hw attention 0x%08x", val);
+		if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
+		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
+		if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
+		if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
+		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
+		if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
+			PMD_DRV_LOG(INFO, sc,
+				    "ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
+	}
+
+	if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
+		    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
+		PMD_DRV_LOG(INFO, sc,
+			    "ERROR: FATAL parity attention set4 0x%08x",
+			    (uint32_t) (attn &
+					(AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
+					 |
+					 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
+	}
+}
+
+static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+
+	REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
+}
+
+static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+
+	REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
+}
+
+/*
+ * called due to MCP event (on pmf):
+ *   reread new bandwidth configuration
+ *   configure FW
+ *   notify others function about the change
+ */
+static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
+{
+	if (sc->link_vars.link_up) {
+		bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
+		bnx2x_link_sync_notify(sc);
+	}
+
+	storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+}
+
+static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
+{
+	bnx2x_config_mf_bw(sc);
+	bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
+}
+
+static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
+{
+	bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
+}
+
+#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
+
+static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
+{
+	struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;
+
+	strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
+		ETH_STAT_INFO_VERSION_LEN);
+
+	sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
+					      DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
+					      ether_stat->mac_local + MAC_PAD,
+					      MAC_PAD, ETH_ALEN);
+
+	ether_stat->mtu_size = sc->mtu;
+
+	ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
+	ether_stat->promiscuous_mode = 0;	// (flags & PROMISC) ? 1 : 0;
+
+	ether_stat->txq_size = sc->tx_ring_size;
+	ether_stat->rxq_size = sc->rx_ring_size;
+}
+
+static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
+{
+	enum drv_info_opcode op_code;
+	uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
+
+	/* if drv_info version supported by MFW doesn't match - send NACK */
+	if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
+		bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
+		return;
+	}
+
+	op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
+		   DRV_INFO_CONTROL_OP_CODE_SHIFT);
+
+	memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
+
+	switch (op_code) {
+	case ETH_STATS_OPCODE:
+		bnx2x_drv_info_ether_stat(sc);
+		break;
+	case FCOE_STATS_OPCODE:
+	case ISCSI_STATS_OPCODE:
+	default:
+		/* if op code isn't supported - send NACK */
+		bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
+		return;
+	}
+
+	/*
+	 * If we got drv_info attn from MFW then these fields are defined in
+	 * shmem2 for sure
+	 */
+	SHMEM2_WR(sc, drv_info_host_addr_lo,
+		  U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
+	SHMEM2_WR(sc, drv_info_host_addr_hi,
+		  U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
+
+	bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
+}
+
+static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
+{
+	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
+/*
+ * This is the only place besides the function initialization
+ * where the sc->flags can change so it is done without any
+ * locks
+ */
+		if (sc->devinfo.
+		    mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
+			PMD_DRV_LOG(DEBUG, sc, "mf_cfg function disabled");
+			sc->flags |= BNX2X_MF_FUNC_DIS;
+			bnx2x_e1h_disable(sc);
+		} else {
+			PMD_DRV_LOG(DEBUG, sc, "mf_cfg function enabled");
+			sc->flags &= ~BNX2X_MF_FUNC_DIS;
+			bnx2x_e1h_enable(sc);
+		}
+		dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
+	}
+
+	if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
+		bnx2x_config_mf_bw(sc);
+		dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
+	}
+
+	/* Report results to MCP */
+	if (dcc_event)
+		bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
+	else
+		bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
+}
+
+static void bnx2x_pmf_update(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	uint32_t val;
+
+	sc->port.pmf = 1;
+
+	/*
+	 * We need the mb() to ensure the ordering between the writing to
+	 * sc->port.pmf here and reading it from the bnx2x_periodic_task().
+	 */
+	mb();
+
+	/* enable nig attention */
+	val = (0xff0f | (1 << (SC_VN(sc) + 4)));
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
+		REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
+	} else if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
+		REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
+	}
+
+	bnx2x_stats_handle(sc, STATS_EVENT_PMF);
+}
+
+static int bnx2x_mc_assert(struct bnx2x_softc *sc)
+{
+	char last_idx;
+	int i, rc = 0;
+	__rte_unused uint32_t row0, row1, row2, row3;
+
+	/* XSTORM */
+	last_idx =
+	    REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx)
+		PMD_DRV_LOG(ERR, sc, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+
+	/* print the asserts */
+	for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 =
+		    REG_RD(sc,
+			   BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
+		row1 =
+		    REG_RD(sc,
+			   BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+			   4);
+		row2 =
+		    REG_RD(sc,
+			   BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+			   8);
+		row3 =
+		    REG_RD(sc,
+			   BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+			   12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			PMD_DRV_LOG(ERR, sc,
+				    "XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+				    i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* TSTORM */
+	last_idx =
+	    REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx) {
+		PMD_DRV_LOG(ERR, sc, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+	}
+
+	/* print the asserts */
+	for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 =
+		    REG_RD(sc,
+			   BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
+		row1 =
+		    REG_RD(sc,
+			   BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+			   4);
+		row2 =
+		    REG_RD(sc,
+			   BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+			   8);
+		row3 =
+		    REG_RD(sc,
+			   BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+			   12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			PMD_DRV_LOG(ERR, sc,
+				    "TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+				    i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* CSTORM */
+	last_idx =
+	    REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx) {
+		PMD_DRV_LOG(ERR, sc, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+	}
+
+	/* print the asserts */
+	for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 =
+		    REG_RD(sc,
+			   BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
+		row1 =
+		    REG_RD(sc,
+			   BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+			   4);
+		row2 =
+		    REG_RD(sc,
+			   BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+			   8);
+		row3 =
+		    REG_RD(sc,
+			   BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+			   12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			PMD_DRV_LOG(ERR, sc,
+				    "CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+				    i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* USTORM */
+	last_idx =
+	    REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx) {
+		PMD_DRV_LOG(ERR, sc, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+	}
+
+	/* print the asserts */
+	for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 =
+		    REG_RD(sc,
+			   BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
+		row1 =
+		    REG_RD(sc,
+			   BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+			   4);
+		row2 =
+		    REG_RD(sc,
+			   BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+			   8);
+		row3 =
+		    REG_RD(sc,
+			   BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+			   12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			PMD_DRV_LOG(ERR, sc,
+				    "USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+				    i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	return rc;
+}
+
+static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
+{
+	int func = SC_FUNC(sc);
+	uint32_t val;
+
+	if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+		if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {
+
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+			bnx2x_read_mf_cfg(sc);
+			sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
+			    MFCFG_RD(sc,
+				     func_mf_config[SC_ABS_FUNC(sc)].config);
+			val =
+			    SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
+
+			if (val & DRV_STATUS_DCC_EVENT_MASK)
+				bnx2x_dcc_event(sc,
+					      (val &
+					       DRV_STATUS_DCC_EVENT_MASK));
+
+			if (val & DRV_STATUS_SET_MF_BW)
+				bnx2x_set_mf_bw(sc);
+
+			if (val & DRV_STATUS_DRV_INFO_REQ)
+				bnx2x_handle_drv_info_req(sc);
+
+			if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
+				bnx2x_pmf_update(sc);
+
+			if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
+				bnx2x_handle_eee_event(sc);
+
+			if (sc->link_vars.periodic_flags &
+			    ELINK_PERIODIC_FLAGS_LINK_EVENT) {
+				/* sync with link */
+				bnx2x_acquire_phy_lock(sc);
+				sc->link_vars.periodic_flags &=
+				    ~ELINK_PERIODIC_FLAGS_LINK_EVENT;
+				bnx2x_release_phy_lock(sc);
+				if (IS_MF(sc)) {
+					bnx2x_link_sync_notify(sc);
+				}
+				bnx2x_link_report(sc);
+			}
+
+			/*
+			 * Always call it here: bnx2x_link_report() will
+			 * prevent the link indication duplication.
+			 */
+			bnx2x_link_status_update(sc);
+
+		} else if (attn & BNX2X_MC_ASSERT_BITS) {
+
+			PMD_DRV_LOG(ERR, sc, "MC assert!");
+			bnx2x_mc_assert(sc);
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+			rte_panic("MC assert!");
+
+		} else if (attn & BNX2X_MCP_ASSERT) {
+
+			PMD_DRV_LOG(ERR, sc, "MCP assert!");
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+
+		} else {
+			PMD_DRV_LOG(ERR, sc,
+				    "Unknown HW assert! (attn 0x%08x)", attn);
+		}
+	}
+
+	if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+		PMD_DRV_LOG(ERR, sc, "LATCHED attention 0x%08x (masked)", attn);
+		if (attn & BNX2X_GRC_TIMEOUT) {
+			val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
+			PMD_DRV_LOG(ERR, sc, "GRC time-out 0x%08x", val);
+		}
+		if (attn & BNX2X_GRC_RSV) {
+			val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
+			PMD_DRV_LOG(ERR, sc, "GRC reserved 0x%08x", val);
+		}
+		REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+	}
+}
+
+static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
+{
+	int port = SC_PORT(sc);
+	int reg_offset;
+	uint32_t val0, mask0, val1, mask1;
+	uint32_t val;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+		val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
+		PMD_DRV_LOG(ERR, sc, "CFC hw attention 0x%08x", val);
+/* CFC error attention */
+		if (val & 0x2) {
+			PMD_DRV_LOG(ERR, sc, "FATAL error from CFC");
+		}
+	}
+
+	if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+		val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
+		PMD_DRV_LOG(ERR, sc, "PXP hw attention-0 0x%08x", val);
+/* RQ_USDMDP_FIFO_OVERFLOW */
+		if (val & 0x18000) {
+			PMD_DRV_LOG(ERR, sc, "FATAL error from PXP");
+		}
+
+		if (!CHIP_IS_E1x(sc)) {
+			val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
+			PMD_DRV_LOG(ERR, sc, "PXP hw attention-1 0x%08x", val);
+		}
+	}
+#define PXP2_EOP_ERROR_BIT  PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
+#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
+
+	if (attn & AEU_PXP2_HW_INT_BIT) {
+/*  CQ47854 workaround do not panic on
+ *  PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
+ */
+		if (!CHIP_IS_E1x(sc)) {
+			mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
+			val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
+			mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
+			val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
+			/*
+			 * If the only PXP2_EOP_ERROR_BIT is set in
+			 * STS0 and STS1 - clear it
+			 *
+			 * probably we lose additional attentions between
+			 * STS0 and STS_CLR0, in this case user will not
+			 * be notified about them
+			 */
+			if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
+			    !(val1 & mask1))
+				val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
+
+			/* print the register, since no one can restore it */
+			PMD_DRV_LOG(ERR, sc,
+				    "PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);
+
+			/*
+			 * if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
+			 * then notify
+			 */
+			if (val0 & PXP2_EOP_ERROR_BIT) {
+				PMD_DRV_LOG(ERR, sc, "PXP2_WR_PGLUE_EOP_ERROR");
+
+				/*
+				 * if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
+				 * set then clear attention from PXP2 block without panic
+				 */
+				if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
+				    ((val1 & mask1) == 0))
+					attn &= ~AEU_PXP2_HW_INT_BIT;
+			}
+		}
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_2) {
+		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
+			      MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
+
+		val = REG_RD(sc, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
+		REG_WR(sc, reg_offset, val);
+
+		PMD_DRV_LOG(ERR, sc,
+			    "FATAL HW block attention set2 0x%x",
+			    (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
+		rte_panic("HW block attention set2");
+	}
+}
+
+static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
+{
+	int port = SC_PORT(sc);
+	int reg_offset;
+	uint32_t val;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
+		val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
+		PMD_DRV_LOG(ERR, sc, "DB hw attention 0x%08x", val);
+/* DORQ discard attention */
+		if (val & 0x2) {
+			PMD_DRV_LOG(ERR, sc, "FATAL error from DORQ");
+		}
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_1) {
+		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
+			      MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
+
+		val = REG_RD(sc, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
+		REG_WR(sc, reg_offset, val);
+
+		PMD_DRV_LOG(ERR, sc,
+			    "FATAL HW block attention set1 0x%08x",
+			    (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
+		rte_panic("HW block attention set1");
+	}
+}
+
+static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
+{
+	int port = SC_PORT(sc);
+	int reg_offset;
+	uint32_t val;
+
+	reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+	    MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+		val = REG_RD(sc, reg_offset);
+		val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+		REG_WR(sc, reg_offset, val);
+
+		PMD_DRV_LOG(WARNING, sc, "SPIO5 hw attention");
+
+/* Fan failure attention */
+		elink_hw_reset_phy(&sc->link_params);
+		bnx2x_fan_failure(sc);
+	}
+
+	if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
+		bnx2x_acquire_phy_lock(sc);
+		elink_handle_module_detect_int(&sc->link_params);
+		bnx2x_release_phy_lock(sc);
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_0) {
+		val = REG_RD(sc, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
+		REG_WR(sc, reg_offset, val);
+
+		rte_panic("FATAL HW block attention set0 0x%lx",
+			  (attn & (unsigned long)HW_INTERRUT_ASSERT_SET_0));
+	}
+}
+
+static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
+{
+	struct attn_route attn;
+	struct attn_route *group_mask;
+	int port = SC_PORT(sc);
+	int index;
+	uint32_t reg_addr;
+	uint32_t val;
+	uint32_t aeu_mask;
+	uint8_t global = FALSE;
+
+	/*
+	 * Need to take HW lock because MCP or other port might also
+	 * try to handle this event.
+	 */
+	bnx2x_acquire_alr(sc);
+
+	if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
+		sc->recovery_state = BNX2X_RECOVERY_INIT;
+
+/* disable HW interrupts */
+		bnx2x_int_disable(sc);
+		bnx2x_release_alr(sc);
+		return;
+	}
+
+	attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
+	attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
+	attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
+	attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
+	if (!CHIP_IS_E1x(sc)) {
+		attn.sig[4] =
+		    REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
+	} else {
+		attn.sig[4] = 0;
+	}
+
+	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+		if (deasserted & (1 << index)) {
+			group_mask = &sc->attn_group[index];
+
+			bnx2x_attn_int_deasserted4(sc,
+						 attn.
+						 sig[4] & group_mask->sig[4]);
+			bnx2x_attn_int_deasserted3(sc,
+						 attn.
+						 sig[3] & group_mask->sig[3]);
+			bnx2x_attn_int_deasserted1(sc,
+						 attn.
+						 sig[1] & group_mask->sig[1]);
+			bnx2x_attn_int_deasserted2(sc,
+						 attn.
+						 sig[2] & group_mask->sig[2]);
+			bnx2x_attn_int_deasserted0(sc,
+						 attn.
+						 sig[0] & group_mask->sig[0]);
+		}
+	}
+
+	bnx2x_release_alr(sc);
+
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		reg_addr = (HC_REG_COMMAND_REG + port * 32 +
+			    COMMAND_REG_ATTN_BITS_CLR);
+	} else {
+		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
+	}
+
+	val = ~deasserted;
+	PMD_DRV_LOG(DEBUG, sc,
+		    "about to mask 0x%08x at %s addr 0x%08x", val,
+		    (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
+		    reg_addr);
+	REG_WR(sc, reg_addr, val);
+
+	if (~sc->attn_state & deasserted) {
+		PMD_DRV_LOG(ERR, sc, "IGU error");
+	}
+
+	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+	    MISC_REG_AEU_MASK_ATTN_FUNC_0;
+
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	aeu_mask = REG_RD(sc, reg_addr);
+
+	aeu_mask |= (deasserted & 0x3ff);
+
+	REG_WR(sc, reg_addr, aeu_mask);
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	sc->attn_state &= ~deasserted;
+}
+
+static void bnx2x_attn_int(struct bnx2x_softc *sc)
+{
+	/* read local copy of bits */
+	uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
+	uint32_t attn_ack =
+	    le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
+	uint32_t attn_state = sc->attn_state;
+
+	/* look for changed bits */
+	uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
+	uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
+		    attn_bits, attn_ack, asserted, deasserted);
+
+	if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
+		PMD_DRV_LOG(ERR, sc, "BAD attention state");
+	}
+
+	/* handle bits that were raised */
+	if (asserted) {
+		bnx2x_attn_int_asserted(sc, asserted);
+	}
+
+	if (deasserted) {
+		bnx2x_attn_int_deasserted(sc, deasserted);
+	}
+}
+
+static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
+{
+	struct host_sp_status_block *def_sb = sc->def_sb;
+	uint16_t rc = 0;
+
+	if (!def_sb)
+		return 0;
+
+	mb();			/* status block is written to by the chip */
+
+	if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
+		sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
+		rc |= BNX2X_DEF_SB_ATT_IDX;
+	}
+
+	if (sc->def_idx != def_sb->sp_sb.running_index) {
+		sc->def_idx = def_sb->sp_sb.running_index;
+		rc |= BNX2X_DEF_SB_IDX;
+	}
+
+	mb();
+
+	return rc;
+}
+
+static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
+							  uint32_t cid)
+{
+	return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
+}
+
+static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
+{
+	struct ecore_mcast_ramrod_params rparam;
+	int rc;
+
+	memset(&rparam, 0, sizeof(rparam));
+
+	rparam.mcast_obj = &sc->mcast_obj;
+
+	/* clear pending state for the last command */
+	sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
+
+	/* if there are pending mcast commands - send them */
+	if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
+		rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+		if (rc < 0) {
+			PMD_DRV_LOG(INFO, sc,
+				    "Failed to send pending mcast commands (%d)",
+				    rc);
+		}
+	}
+}
+
+static void
+bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
+{
+	unsigned long ramrod_flags = 0;
+	int rc = 0;
+	uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
+	struct ecore_vlan_mac_obj *vlan_mac_obj;
+
+	/* always push next commands out, don't wait here */
+	bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
+
+	switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
+	case ECORE_FILTER_MAC_PENDING:
+		PMD_DRV_LOG(DEBUG, sc, "Got SETUP_MAC completions");
+		vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
+		break;
+
+	case ECORE_FILTER_MCAST_PENDING:
+		PMD_DRV_LOG(DEBUG, sc, "Got SETUP_MCAST completions");
+		bnx2x_handle_mcast_eqe(sc);
+		return;
+
+	default:
+		PMD_DRV_LOG(NOTICE, sc, "Unsupported classification command: %d",
+			    elem->message.data.eth_event.echo);
+		return;
+	}
+
+	rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
+
+	if (rc < 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Failed to schedule new commands (%d)", rc);
+	} else if (rc > 0) {
+		PMD_DRV_LOG(DEBUG, sc, "Scheduled next pending commands...");
+	}
+}
+
+static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
+{
+	bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+
+	/* send rx_mode command again if was requested */
+	if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
+		bnx2x_set_storm_rx_mode(sc);
+	}
+}
+
+static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
+{
+	storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
+	wmb();			/* keep prod updates ordered */
+}
+
+static void bnx2x_eq_int(struct bnx2x_softc *sc)
+{
+	uint16_t hw_cons, sw_cons, sw_prod;
+	union event_ring_elem *elem;
+	uint8_t echo;
+	uint32_t cid;
+	uint8_t opcode;
+	int spqe_cnt = 0;
+	struct ecore_queue_sp_obj *q_obj;
+	struct ecore_func_sp_obj *f_obj = &sc->func_obj;
+	struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
+
+	hw_cons = le16toh(*sc->eq_cons_sb);
+
+	/*
+	 * The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
+	 * when we get to the next-page we need to adjust so the loop
+	 * condition below will be met. The next element is the size of a
+	 * regular element and hence incrementing by 1
+	 */
+	if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
+		hw_cons++;
+	}
+
+	/*
+	 * This function may never run in parallel with itself for a
+	 * specific sc and no need for a read memory barrier here.
+	 */
+	sw_cons = sc->eq_cons;
+	sw_prod = sc->eq_prod;
+
+	for (;
+	     sw_cons != hw_cons;
+	     sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
+
+		elem = &sc->eq[EQ_DESC(sw_cons)];
+
+/* elem CID originates from FW, actually LE */
+		cid = SW_CID(elem->message.data.cfc_del_event.cid);
+		opcode = elem->message.opcode;
+
+/* handle eq element */
+		switch (opcode) {
+		case EVENT_RING_OPCODE_STAT_QUERY:
+			PMD_DEBUG_PERIODIC_LOG(DEBUG, sc, "got statistics completion event %d",
+				    sc->stats_comp++);
+			/* nothing to do with stats comp */
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_CFC_DEL:
+			/* handle according to cid range */
+			/* we may want to verify here that the sc state is HALTING */
+			PMD_DRV_LOG(DEBUG, sc, "got delete ramrod for MULTI[%d]",
+				    cid);
+			q_obj = bnx2x_cid_to_q_obj(sc, cid);
+			if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
+				break;
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_STOP_TRAFFIC:
+			PMD_DRV_LOG(DEBUG, sc, "got STOP TRAFFIC");
+			if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
+				break;
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_START_TRAFFIC:
+			PMD_DRV_LOG(DEBUG, sc, "got START TRAFFIC");
+			if (f_obj->complete_cmd
+			    (sc, f_obj, ECORE_F_CMD_TX_START)) {
+				break;
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_FUNCTION_UPDATE:
+			echo = elem->message.data.function_update_event.echo;
+			if (echo == SWITCH_UPDATE) {
+				PMD_DRV_LOG(DEBUG, sc,
+					    "got FUNC_SWITCH_UPDATE ramrod");
+				if (f_obj->complete_cmd(sc, f_obj,
+							ECORE_F_CMD_SWITCH_UPDATE))
+				{
+					break;
+				}
+			} else {
+				PMD_DRV_LOG(DEBUG, sc,
+					    "AFEX: ramrod completed FUNCTION_UPDATE");
+				f_obj->complete_cmd(sc, f_obj,
+						    ECORE_F_CMD_AFEX_UPDATE);
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_FORWARD_SETUP:
+			q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
+			if (q_obj->complete_cmd(sc, q_obj,
+						ECORE_Q_CMD_SETUP_TX_ONLY)) {
+				break;
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_FUNCTION_START:
+			PMD_DRV_LOG(DEBUG, sc, "got FUNC_START ramrod");
+			if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
+				break;
+			}
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_FUNCTION_STOP:
+			PMD_DRV_LOG(DEBUG, sc, "got FUNC_STOP ramrod");
+			if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
+				break;
+			}
+			goto next_spqe;
+		}
+
+		switch (opcode | sc->state) {
+		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
+			cid =
+			    elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
+			PMD_DRV_LOG(DEBUG, sc, "got RSS_UPDATE ramrod. CID %d",
+				    cid);
+			rss_raw->clear_pending(rss_raw);
+			break;
+
+		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+			PMD_DRV_LOG(DEBUG, sc,
+				    "got (un)set mac ramrod");
+			bnx2x_handle_classification_eqe(sc, elem);
+			break;
+
+		case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+			PMD_DRV_LOG(DEBUG, sc,
+				    "got mcast ramrod");
+			bnx2x_handle_mcast_eqe(sc);
+			break;
+
+		case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+			PMD_DRV_LOG(DEBUG, sc,
+				    "got rx_mode ramrod");
+			bnx2x_handle_rx_mode_eqe(sc);
+			break;
+
+		default:
+			/* unknown event log error and continue */
+			PMD_DRV_LOG(INFO, sc, "Unknown EQ event %d, sc->state 0x%x",
+				    elem->message.opcode, sc->state);
+		}
+
+next_spqe:
+		spqe_cnt++;
+	}			/* for */
+
+	mb();
+	atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
+
+	sc->eq_cons = sw_cons;
+	sc->eq_prod = sw_prod;
+
+	/* make sure that above mem writes were issued towards the memory */
+	wmb();
+
+	/* update producer */
+	bnx2x_update_eq_prod(sc, sc->eq_prod);
+}
+
+static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
+{
+	uint16_t status;
+	int rc = 0;
+
+	PMD_DRV_LOG(DEBUG, sc, "---> SP TASK <---");
+
+	/* what work needs to be performed? */
+	status = bnx2x_update_dsb_idx(sc);
+
+	PMD_DRV_LOG(DEBUG, sc, "dsb status 0x%04x", status);
+
+	/* HW attentions */
+	if (status & BNX2X_DEF_SB_ATT_IDX) {
+		PMD_DRV_LOG(DEBUG, sc, "---> ATTN INTR <---");
+		bnx2x_attn_int(sc);
+		status &= ~BNX2X_DEF_SB_ATT_IDX;
+		rc = 1;
+	}
+
+	/* SP events: STAT_QUERY and others */
+	if (status & BNX2X_DEF_SB_IDX) {
+/* handle EQ completions */
+		PMD_DRV_LOG(DEBUG, sc, "---> EQ INTR <---");
+		bnx2x_eq_int(sc);
+		bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
+			   le16toh(sc->def_idx), IGU_INT_NOP, 1);
+		status &= ~BNX2X_DEF_SB_IDX;
+	}
+
+	/* if status is non zero then something went wrong */
+	if (unlikely(status)) {
+		PMD_DRV_LOG(INFO, sc,
+			    "Got an unknown SP interrupt! (0x%04x)", status);
+	}
+
+	/* ack status block only if something was actually handled */
+	bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
+		   le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
+
+	return rc;
+}
+
+static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp)
+{
+	struct bnx2x_softc *sc = fp->sc;
+	uint8_t more_rx = FALSE;
+
+	/* Make sure FP is initialized */
+	if (!fp->sb_running_index)
+		return;
+
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, sc,
+			       "---> FP TASK QUEUE (%d) <--", fp->index);
+
+	/* update the fastpath index */
+	bnx2x_update_fp_sb_idx(fp);
+
+	if (rte_atomic32_read(&sc->scan_fp) == 1) {
+		if (bnx2x_has_rx_work(fp)) {
+			more_rx = bnx2x_rxeof(sc, fp);
+		}
+
+		if (more_rx) {
+			/* still more work to do */
+			bnx2x_handle_fp_tq(fp);
+			return;
+		}
+		/* We have completed slow path completion, clear the flag */
+		rte_atomic32_set(&sc->scan_fp, 0);
+	}
+
+	bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
+		   le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
+}
+
+/*
+ * Legacy interrupt entry point.
+ *
+ * Verifies that the controller generated the interrupt and
+ * then calls a separate routine to handle the various
+ * interrupt causes: link, RX, and TX.
+ */
+int bnx2x_intr_legacy(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	uint32_t status, mask;
+	int i, rc = 0;
+
+	/*
+	 * 0 for ustorm, 1 for cstorm
+	 * the bits returned from ack_int() are 0-15
+	 * bit 0 = attention status block
+	 * bit 1 = fast path status block
+	 * a mask of 0x2 or more = tx/rx event
+	 * a mask of 1 = slow path event
+	 */
+
+	status = bnx2x_ack_int(sc);
+
+	/* the interrupt is not for us */
+	if (unlikely(status == 0)) {
+		return 0;
+	}
+
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, sc, "Interrupt status 0x%04x", status);
+	//bnx2x_dump_status_block(sc);
+
+	FOR_EACH_ETH_QUEUE(sc, i) {
+		fp = &sc->fp[i];
+		mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
+		if (status & mask) {
+		/* acknowledge and disable further fastpath interrupts */
+			bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
+				     0, IGU_INT_DISABLE, 0);
+			bnx2x_handle_fp_tq(fp);
+			status &= ~mask;
+		}
+	}
+
+	if (unlikely(status & 0x1)) {
+		/* acknowledge and disable further slowpath interrupts */
+		bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
+			     0, IGU_INT_DISABLE, 0);
+		rc = bnx2x_handle_sp_tq(sc);
+		status &= ~0x1;
+	}
+
+	if (unlikely(status)) {
+		PMD_DRV_LOG(WARNING, sc,
+			    "Unexpected fastpath status (0x%08x)!", status);
+	}
+
+	return rc;
+}
+
+static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
+static void bnx2x_reset_common(struct bnx2x_softc *sc);
+static void bnx2x_reset_port(struct bnx2x_softc *sc);
+static void bnx2x_reset_func(struct bnx2x_softc *sc);
+static int bnx2x_init_firmware(struct bnx2x_softc *sc);
+static void bnx2x_release_firmware(struct bnx2x_softc *sc);
+
+static struct
+ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
+	.init_hw_cmn_chip = bnx2x_init_hw_common_chip,
+	.init_hw_cmn = bnx2x_init_hw_common,
+	.init_hw_port = bnx2x_init_hw_port,
+	.init_hw_func = bnx2x_init_hw_func,
+
+	.reset_hw_cmn = bnx2x_reset_common,
+	.reset_hw_port = bnx2x_reset_port,
+	.reset_hw_func = bnx2x_reset_func,
+
+	.init_fw = bnx2x_init_firmware,
+	.release_fw = bnx2x_release_firmware,
+};
+
+static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
+{
+	sc->dmae_ready = 0;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	ecore_init_func_obj(sc,
+			    &sc->func_obj,
+			    BNX2X_SP(sc, func_rdata),
+			    (rte_iova_t)BNX2X_SP_MAPPING(sc, func_rdata),
+			    BNX2X_SP(sc, func_afex_rdata),
+			    (rte_iova_t)BNX2X_SP_MAPPING(sc, func_afex_rdata),
+			    &bnx2x_func_sp_drv);
+}
+
+static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
+{
+	struct ecore_func_state_params func_params = { NULL };
+	int rc;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	/* prepare the parameters for function state transitions */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+	func_params.f_obj = &sc->func_obj;
+	func_params.cmd = ECORE_F_CMD_HW_INIT;
+
+	func_params.params.hw_init.load_phase = load_code;
+
+	/*
+	 * Via a plethora of function pointers, we will eventually reach
+	 * bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
+	 */
+	rc = ecore_func_state_change(sc, &func_params);
+
+	return rc;
+}
+
+static void
+bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
+{
+	uint32_t i;
+
+	if (!(len % 4) && !(addr % 4)) {
+		for (i = 0; i < len; i += 4) {
+			REG_WR(sc, (addr + i), fill);
+		}
+	} else {
+		for (i = 0; i < len; i++) {
+			REG_WR8(sc, (addr + i), fill);
+		}
+	}
+}
+
+/* writes FP SP data to FW - data_size in dwords */
+static void
+bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
+		  uint32_t data_size)
+{
+	uint32_t index;
+
+	for (index = 0; index < data_size; index++) {
+		REG_WR(sc,
+		       (BAR_CSTRORM_INTMEM +
+			CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
+			(sizeof(uint32_t) * index)), *(sb_data_p + index));
+	}
+}
+
+static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
+{
+	struct hc_status_block_data_e2 sb_data_e2;
+	struct hc_status_block_data_e1x sb_data_e1x;
+	uint32_t *sb_data_p;
+	uint32_t data_size = 0;
+
+	if (!CHIP_IS_E1x(sc)) {
+		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+		sb_data_e2.common.state = SB_DISABLED;
+		sb_data_e2.common.p_func.vf_valid = FALSE;
+		sb_data_p = (uint32_t *) & sb_data_e2;
+		data_size = (sizeof(struct hc_status_block_data_e2) /
+			     sizeof(uint32_t));
+	} else {
+		memset(&sb_data_e1x, 0,
+		       sizeof(struct hc_status_block_data_e1x));
+		sb_data_e1x.common.state = SB_DISABLED;
+		sb_data_e1x.common.p_func.vf_valid = FALSE;
+		sb_data_p = (uint32_t *) & sb_data_e1x;
+		data_size = (sizeof(struct hc_status_block_data_e1x) /
+			     sizeof(uint32_t));
+	}
+
+	bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
+
+	bnx2x_fill(sc,
+		 (BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
+		 CSTORM_STATUS_BLOCK_SIZE);
+	bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
+		 0, CSTORM_SYNC_BLOCK_SIZE);
+}
+
+static void
+bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
+		  struct hc_sp_status_block_data *sp_sb_data)
+{
+	uint32_t i;
+
+	for (i = 0;
+	     i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
+	     i++) {
+		REG_WR(sc,
+		       (BAR_CSTRORM_INTMEM +
+			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
+			(i * sizeof(uint32_t))),
+		       *((uint32_t *) sp_sb_data + i));
+	}
+}
+
+static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
+{
+	struct hc_sp_status_block_data sp_sb_data;
+
+	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+	sp_sb_data.state = SB_DISABLED;
+	sp_sb_data.p_func.vf_valid = FALSE;
+
+	bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
+
+	bnx2x_fill(sc,
+		 (BAR_CSTRORM_INTMEM +
+		  CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
+		 0, CSTORM_SP_STATUS_BLOCK_SIZE);
+	bnx2x_fill(sc,
+		 (BAR_CSTRORM_INTMEM +
+		  CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
+		 0, CSTORM_SP_SYNC_BLOCK_SIZE);
+}
+
+static void
+bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
+			     int igu_seg_id)
+{
+	hc_sm->igu_sb_id = igu_sb_id;
+	hc_sm->igu_seg_id = igu_seg_id;
+	hc_sm->timer_value = 0xFF;
+	hc_sm->time_to_expire = 0xFFFFFFFF;
+}
+
+static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
+{
+	/* zero out state machine indices */
+
+	/* rx indices */
+	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+
+	/* tx indices */
+	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
+
+	/* map indices */
+
+	/* rx indices */
+	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
+	    (SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+
+	/* tx indices */
+	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
+	    (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
+	    (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
+	    (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
+	    (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+}
+
+static void
+bnx2x_init_sb(struct bnx2x_softc *sc, rte_iova_t busaddr, int vfid,
+	    uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
+{
+	struct hc_status_block_data_e2 sb_data_e2;
+	struct hc_status_block_data_e1x sb_data_e1x;
+	struct hc_status_block_sm *hc_sm_p;
+	uint32_t *sb_data_p;
+	int igu_seg_id;
+	int data_size;
+
+	if (CHIP_INT_MODE_IS_BC(sc)) {
+		igu_seg_id = HC_SEG_ACCESS_NORM;
+	} else {
+		igu_seg_id = IGU_SEG_ACCESS_NORM;
+	}
+
+	bnx2x_zero_fp_sb(sc, fw_sb_id);
+
+	if (!CHIP_IS_E1x(sc)) {
+		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+		sb_data_e2.common.state = SB_ENABLED;
+		sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
+		sb_data_e2.common.p_func.vf_id = vfid;
+		sb_data_e2.common.p_func.vf_valid = vf_valid;
+		sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
+		sb_data_e2.common.same_igu_sb_1b = TRUE;
+		sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
+		sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
+		hc_sm_p = sb_data_e2.common.state_machine;
+		sb_data_p = (uint32_t *) & sb_data_e2;
+		data_size = (sizeof(struct hc_status_block_data_e2) /
+			     sizeof(uint32_t));
+		bnx2x_map_sb_state_machines(sb_data_e2.index_data);
+	} else {
+		memset(&sb_data_e1x, 0,
+		       sizeof(struct hc_status_block_data_e1x));
+		sb_data_e1x.common.state = SB_ENABLED;
+		sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
+		sb_data_e1x.common.p_func.vf_id = 0xff;
+		sb_data_e1x.common.p_func.vf_valid = FALSE;
+		sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
+		sb_data_e1x.common.same_igu_sb_1b = TRUE;
+		sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
+		sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
+		hc_sm_p = sb_data_e1x.common.state_machine;
+		sb_data_p = (uint32_t *) & sb_data_e1x;
+		data_size = (sizeof(struct hc_status_block_data_e1x) /
+			     sizeof(uint32_t));
+		bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
+	}
+
+	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
+	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
+
+	/* write indices to HW - PCI guarantees endianity of regpairs */
+	bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
+}
+
+static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
+{
+	if (CHIP_IS_E1x(fp->sc)) {
+		return fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H;
+	} else {
+		return fp->cl_id;
+	}
+}
+
+static uint32_t
+bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
+{
+	uint32_t offset = BAR_USTRORM_INTMEM;
+
+	if (IS_VF(sc)) {
+		return PXP_VF_ADDR_USDM_QUEUES_START +
+			(sc->acquire_resp.resc.hw_qid[fp->index] *
+			 sizeof(struct ustorm_queue_zone_data));
+	} else if (!CHIP_IS_E1x(sc)) {
+		offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
+	} else {
+		offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
+	}
+
+	return offset;
+}
+
+static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
+{
+	struct bnx2x_fastpath *fp = &sc->fp[idx];
+	uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
+	unsigned long q_type = 0;
+	int cos;
+
+	fp->sc = sc;
+	fp->index = idx;
+
+	fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
+	fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
+
+	if (CHIP_IS_E1x(sc))
+		fp->cl_id = SC_L_ID(sc) + idx;
+	else
+/* want client ID same as IGU SB ID for non-E1 */
+		fp->cl_id = fp->igu_sb_id;
+	fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
+
+	/* setup sb indices */
+	if (!CHIP_IS_E1x(sc)) {
+		fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
+		fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
+	} else {
+		fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
+		fp->sb_running_index =
+		    fp->status_block.e1x_sb->sb.running_index;
+	}
+
+	/* init shortcut */
+	fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);
+
+	fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
+
+	for (cos = 0; cos < sc->max_cos; cos++) {
+		cids[cos] = idx;
+	}
+	fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
+
+	/* nothing more for a VF to do */
+	if (IS_VF(sc)) {
+		return;
+	}
+
+	bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
+		    fp->fw_sb_id, fp->igu_sb_id);
+
+	bnx2x_update_fp_sb_idx(fp);
+
+	/* Configure Queue State object */
+	bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
+	bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
+
+	ecore_init_queue_obj(sc,
+			     &sc->sp_objs[idx].q_obj,
+			     fp->cl_id,
+			     cids,
+			     sc->max_cos,
+			     SC_FUNC(sc),
+			     BNX2X_SP(sc, q_rdata),
+			     (rte_iova_t)BNX2X_SP_MAPPING(sc, q_rdata),
+			     q_type);
+
+	/* configure classification DBs */
+	ecore_init_mac_obj(sc,
+			   &sc->sp_objs[idx].mac_obj,
+			   fp->cl_id,
+			   idx,
+			   SC_FUNC(sc),
+			   BNX2X_SP(sc, mac_rdata),
+			   (rte_iova_t)BNX2X_SP_MAPPING(sc, mac_rdata),
+			   ECORE_FILTER_MAC_PENDING, &sc->sp_state,
+			   ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
+}
+
+static void
+bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+		   uint16_t rx_bd_prod, uint16_t rx_cq_prod)
+{
+	struct ustorm_eth_rx_producers rx_prods;
+	uint32_t i;
+
+	memset(&rx_prods, 0, sizeof(rx_prods));
+
+	/* update producers */
+	rx_prods.bd_prod = rx_bd_prod;
+	rx_prods.cqe_prod = rx_cq_prod;
+
+	/*
+	 * Make sure that the BD and SGE data is updated before updating the
+	 * producers since FW might read the BD/SGE right after the producer
+	 * is updated.
+	 * This is only applicable for weak-ordered memory model archs such
+	 * as IA-64. The following barrier is also mandatory since FW will
+	 * assumes BDs must have buffers.
+	 */
+	wmb();
+
+	for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
+		REG_WR(sc, (fp->ustorm_rx_prods_offset + (i * 4)),
+		       ((uint32_t *)&rx_prods)[i]);
+	}
+
+	wmb();			/* keep prod updates ordered */
+}
+
+static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	int i;
+	struct bnx2x_rx_queue *rxq;
+
+	for (i = 0; i < sc->num_queues; i++) {
+		fp = &sc->fp[i];
+		rxq = sc->rx_queues[fp->index];
+		if (!rxq) {
+			PMD_RX_LOG(ERR, "RX queue is NULL");
+			return;
+		}
+
+		rxq->rx_bd_head = 0;
+		rxq->rx_bd_tail = rxq->nb_rx_desc;
+		rxq->rx_cq_head = 0;
+		rxq->rx_cq_tail = TOTAL_RCQ_ENTRIES(rxq);
+		*fp->rx_cq_cons_sb = 0;
+
+		/*
+		 * Activate the BD ring...
+		 * Warning, this will generate an interrupt (to the TSTORM)
+		 * so this can only be done after the chip is initialized
+		 */
+		bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);
+
+		if (i != 0) {
+			continue;
+		}
+	}
+}
+
+static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
+{
+	struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+	fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
+	fp->tx_db.data.zero_fill1 = 0;
+	fp->tx_db.data.prod = 0;
+
+	if (!txq) {
+		PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+		return;
+	}
+
+	txq->tx_pkt_tail = 0;
+	txq->tx_pkt_head = 0;
+	txq->tx_bd_tail = 0;
+	txq->tx_bd_head = 0;
+}
+
+static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
+{
+	int i;
+
+	for (i = 0; i < sc->num_queues; i++) {
+		bnx2x_init_tx_ring_one(&sc->fp[i]);
+	}
+}
+
+static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
+{
+	struct host_sp_status_block *def_sb = sc->def_sb;
+	rte_iova_t mapping = sc->def_sb_dma.paddr;
+	int igu_sp_sb_index;
+	int igu_seg_id;
+	int port = SC_PORT(sc);
+	int func = SC_FUNC(sc);
+	int reg_offset, reg_offset_en5;
+	uint64_t section;
+	int index, sindex;
+	struct hc_sp_status_block_data sp_sb_data;
+
+	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+	if (CHIP_INT_MODE_IS_BC(sc)) {
+		igu_sp_sb_index = DEF_SB_IGU_ID;
+		igu_seg_id = HC_SEG_ACCESS_DEF;
+	} else {
+		igu_sp_sb_index = sc->igu_dsb_id;
+		igu_seg_id = IGU_SEG_ACCESS_DEF;
+	}
+
+	/* attentions */
+	section = ((uint64_t) mapping +
+		   offsetof(struct host_sp_status_block, atten_status_block));
+	def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
+	sc->attn_state = 0;
+
+	reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+	    MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+
+	reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+	    MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
+
+	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+/* take care of sig[0]..sig[4] */
+		for (sindex = 0; sindex < 4; sindex++) {
+			sc->attn_group[index].sig[sindex] =
+			    REG_RD(sc,
+				   (reg_offset + (sindex * 0x4) +
+				    (0x10 * index)));
+		}
+
+		if (!CHIP_IS_E1x(sc)) {
+			/*
+			 * enable5 is separate from the rest of the registers,
+			 * and the address skip is 4 and not 16 between the
+			 * different groups
+			 */
+			sc->attn_group[index].sig[4] =
+			    REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
+		} else {
+			sc->attn_group[index].sig[4] = 0;
+		}
+	}
+
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		reg_offset =
+		    port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
+		REG_WR(sc, reg_offset, U64_LO(section));
+		REG_WR(sc, (reg_offset + 4), U64_HI(section));
+	} else if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
+		REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
+	}
+
+	section = ((uint64_t) mapping +
+		   offsetof(struct host_sp_status_block, sp_sb));
+
+	bnx2x_zero_sp_sb(sc);
+
+	/* PCI guarantees endianity of regpair */
+	sp_sb_data.state = SB_ENABLED;
+	sp_sb_data.host_sb_addr.lo = U64_LO(section);
+	sp_sb_data.host_sb_addr.hi = U64_HI(section);
+	sp_sb_data.igu_sb_id = igu_sp_sb_index;
+	sp_sb_data.igu_seg_id = igu_seg_id;
+	sp_sb_data.p_func.pf_id = func;
+	sp_sb_data.p_func.vnic_id = SC_VN(sc);
+	sp_sb_data.p_func.vf_id = 0xff;
+
+	bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
+
+	bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
+}
+
+static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
+{
+	atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
+	sc->spq_prod_idx = 0;
+	sc->dsb_sp_prod =
+	    &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
+	sc->spq_prod_bd = sc->spq;
+	sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
+}
+
+static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
+{
+	union event_ring_elem *elem;
+	int i;
+
+	for (i = 1; i <= NUM_EQ_PAGES; i++) {
+		elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
+
+		elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
+							 BNX2X_PAGE_SIZE *
+							 (i % NUM_EQ_PAGES)));
+		elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
+							 BNX2X_PAGE_SIZE *
+							 (i % NUM_EQ_PAGES)));
+	}
+
+	sc->eq_cons = 0;
+	sc->eq_prod = NUM_EQ_DESC;
+	sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
+
+	atomic_store_rel_long(&sc->eq_spq_left,
+			      (min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
+				   NUM_EQ_DESC) - 1));
+}
+
+static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
+{
+	int i;
+
+	/*
+	 * Zero this manually as its initialization is currently missing
+	 * in the initTool.
+	 */
+	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
+		REG_WR(sc,
+		       (BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
+		       0);
+	}
+
+	if (!CHIP_IS_E1x(sc)) {
+		REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
+			CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
+			HC_IGU_NBC_MODE);
+	}
+}
+
+static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
+{
+	switch (load_code) {
+	case FW_MSG_CODE_DRV_LOAD_COMMON:
+	case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
+		bnx2x_init_internal_common(sc);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_PORT:
+		/* nothing to do */
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+		/* internal memory per function is initialized inside bnx2x_pf_init */
+		break;
+
+	default:
+		PMD_DRV_LOG(NOTICE, sc, "Unknown load_code (0x%x) from MCP",
+			    load_code);
+		break;
+	}
+}
+
+static void
+storm_memset_func_cfg(struct bnx2x_softc *sc,
+		      struct tstorm_eth_function_common_config *tcfg,
+		      uint16_t abs_fid)
+{
+	uint32_t addr;
+	size_t size;
+
+	addr = (BAR_TSTRORM_INTMEM +
+		TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
+	size = sizeof(struct tstorm_eth_function_common_config);
+	ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
+}
+
+static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
+{
+	struct tstorm_eth_function_common_config tcfg = { 0 };
+
+	if (CHIP_IS_E1x(sc)) {
+		storm_memset_func_cfg(sc, &tcfg, p->func_id);
+	}
+
+	/* Enable the function in the FW */
+	storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
+	storm_memset_func_en(sc, p->func_id, 1);
+
+	/* spq */
+	if (p->func_flgs & FUNC_FLG_SPQ) {
+		storm_memset_spq_addr(sc, p->spq_map, p->func_id);
+		REG_WR(sc,
+		       (XSEM_REG_FAST_MEMORY +
+			XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
+	}
+}
+
+/*
+ * Calculates the sum of vn_min_rates.
+ * It's needed for further normalizing of the min_rates.
+ * Returns:
+ *   sum of vn_min_rates.
+ *     or
+ *   0 - if all the min_rates are 0.
+ * In the later case fainess algorithm should be deactivated.
+ * If all min rates are not zero then those that are zeroes will be set to 1.
+ */
+static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
+{
+	uint32_t vn_cfg;
+	uint32_t vn_min_rate;
+	int all_zero = 1;
+	int vn;
+
+	for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+		vn_cfg = sc->devinfo.mf_info.mf_config[vn];
+		vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
+				FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
+
+		if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
+			/* skip hidden VNs */
+			vn_min_rate = 0;
+		} else if (!vn_min_rate) {
+			/* If min rate is zero - set it to 100 */
+			vn_min_rate = DEF_MIN_RATE;
+		} else {
+			all_zero = 0;
+		}
+
+		input->vnic_min_rate[vn] = vn_min_rate;
+	}
+
+	/* if ETS or all min rates are zeros - disable fairness */
+	if (all_zero) {
+		input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+	} else {
+		input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+	}
+}
+
+static uint16_t
+bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
+{
+	uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
+			    FUNC_MF_CFG_MAX_BW_SHIFT);
+
+	if (!max_cfg) {
+		PMD_DRV_LOG(DEBUG, sc,
+			    "Max BW configured to 0 - using 100 instead");
+		max_cfg = 100;
+	}
+
+	return max_cfg;
+}
+
+static void
+bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
+{
+	uint16_t vn_max_rate;
+	uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
+	uint32_t max_cfg;
+
+	if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
+		vn_max_rate = 0;
+	} else {
+		max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);
+
+		if (IS_MF_SI(sc)) {
+			/* max_cfg in percents of linkspeed */
+			vn_max_rate =
+			    ((sc->link_vars.line_speed * max_cfg) / 100);
+		} else {	/* SD modes */
+			/* max_cfg is absolute in 100Mb units */
+			vn_max_rate = (max_cfg * 100);
+		}
+	}
+
+	input->vnic_max_rate[vn] = vn_max_rate;
+}
+
+static void
+bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
+{
+	struct cmng_init_input input;
+	int vn;
+
+	memset(&input, 0, sizeof(struct cmng_init_input));
+
+	input.port_rate = sc->link_vars.line_speed;
+
+	if (cmng_type == CMNG_FNS_MINMAX) {
+/* read mf conf from shmem */
+		if (read_cfg) {
+			bnx2x_read_mf_cfg(sc);
+		}
+
+/* get VN min rate and enable fairness if not 0 */
+		bnx2x_calc_vn_min(sc, &input);
+
+/* get VN max rate */
+		if (sc->port.pmf) {
+			for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+				bnx2x_calc_vn_max(sc, vn, &input);
+			}
+		}
+
+/* always enable rate shaping and fairness */
+		input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
+
+		ecore_init_cmng(&input, &sc->cmng);
+		return;
+	}
+}
+
+static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
+{
+	if (CHIP_REV_IS_SLOW(sc)) {
+		return CMNG_FNS_NONE;
+	}
+
+	if (IS_MF(sc)) {
+		return CMNG_FNS_MINMAX;
+	}
+
+	return CMNG_FNS_NONE;
+}
+
+static void
+storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
+{
+	int vn;
+	int func;
+	uint32_t addr;
+	size_t size;
+
+	addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
+	size = sizeof(struct cmng_struct_per_port);
+	ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);
+
+	for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+		func = func_by_vn(sc, vn);
+
+		addr = (BAR_XSTRORM_INTMEM +
+			XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
+		size = sizeof(struct rate_shaping_vars_per_vn);
+		ecore_storm_memset_struct(sc, addr, size,
+					  (uint32_t *) & cmng->
+					  vnic.vnic_max_rate[vn]);
+
+		addr = (BAR_XSTRORM_INTMEM +
+			XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
+		size = sizeof(struct fairness_vars_per_vn);
+		ecore_storm_memset_struct(sc, addr, size,
+					  (uint32_t *) & cmng->
+					  vnic.vnic_min_rate[vn]);
+	}
+}
+
+static void bnx2x_pf_init(struct bnx2x_softc *sc)
+{
+	struct bnx2x_func_init_params func_init;
+	struct event_ring_data eq_data;
+	uint16_t flags;
+
+	memset(&eq_data, 0, sizeof(struct event_ring_data));
+	memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));
+
+	if (!CHIP_IS_E1x(sc)) {
+/* reset IGU PF statistics: MSIX + ATTN */
+/* PF */
+		REG_WR(sc,
+		       (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+			(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
+			((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
+			 4)), 0);
+/* ATTN */
+		REG_WR(sc,
+		       (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+			(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
+			(BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
+			((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
+			 4)), 0);
+	}
+
+	/* function setup flags */
+	flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
+
+	func_init.func_flgs = flags;
+	func_init.pf_id = SC_FUNC(sc);
+	func_init.func_id = SC_FUNC(sc);
+	func_init.spq_map = sc->spq_dma.paddr;
+	func_init.spq_prod = sc->spq_prod_idx;
+
+	bnx2x_func_init(sc, &func_init);
+
+	memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
+
+	/*
+	 * Congestion management values depend on the link rate.
+	 * There is no active link so initial link rate is set to 10Gbps.
+	 * When the link comes up the congestion management values are
+	 * re-calculated according to the actual link rate.
+	 */
+	sc->link_vars.line_speed = SPEED_10000;
+	bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));
+
+	/* Only the PMF sets the HW */
+	if (sc->port.pmf) {
+		storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+	}
+
+	/* init Event Queue - PCI bus guarantees correct endainity */
+	eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
+	eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
+	eq_data.producer = sc->eq_prod;
+	eq_data.index_id = HC_SP_INDEX_EQ_CONS;
+	eq_data.sb_id = DEF_SB_ID;
+	storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
+}
+
+static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+	uint32_t val = REG_RD(sc, addr);
+	uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
+	    || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+	uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+	uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
+
+	if (msix) {
+		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			 HC_CONFIG_0_REG_INT_LINE_EN_0);
+		val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+		if (single_msix) {
+			val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
+		}
+	} else if (msi) {
+		val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
+		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+	} else {
+		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_INT_LINE_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+		REG_WR(sc, addr, val);
+
+		val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
+	}
+
+	REG_WR(sc, addr, val);
+
+	/* ensure that HC_CONFIG is written before leading/trailing edge config */
+	mb();
+
+	/* init leading/trailing edge */
+	if (IS_MF(sc)) {
+		val = (0xee0f | (1 << (SC_VN(sc) + 4)));
+		if (sc->port.pmf) {
+			/* enable nig and gpio3 attention */
+			val |= 0x1100;
+		}
+	} else {
+		val = 0xffff;
+	}
+
+	REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
+	REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);
+
+	/* make sure that interrupts are indeed enabled from here on */
+	mb();
+}
+
+static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
+	    || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+	uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+	uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
+
+	val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+	if (msix) {
+		val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+		val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
+		if (single_msix) {
+			val |= IGU_PF_CONF_SINGLE_ISR_EN;
+		}
+	} else if (msi) {
+		val &= ~IGU_PF_CONF_INT_LINE_EN;
+		val |= (IGU_PF_CONF_MSI_MSIX_EN |
+			IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+	} else {
+		val &= ~IGU_PF_CONF_MSI_MSIX_EN;
+		val |= (IGU_PF_CONF_INT_LINE_EN |
+			IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+	}
+
+	/* clean previous status - need to configure igu prior to ack */
+	if ((!msix) || single_msix) {
+		REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+		bnx2x_ack_int(sc);
+	}
+
+	val |= IGU_PF_CONF_FUNC_EN;
+
+	PMD_DRV_LOG(DEBUG, sc, "write 0x%x to IGU mode %s",
+		    val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
+
+	REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+
+	mb();
+
+	/* init leading/trailing edge */
+	if (IS_MF(sc)) {
+		val = (0xee0f | (1 << (SC_VN(sc) + 4)));
+		if (sc->port.pmf) {
+			/* enable nig and gpio3 attention */
+			val |= 0x1100;
+		}
+	} else {
+		val = 0xffff;
+	}
+
+	REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
+	REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
+
+	/* make sure that interrupts are indeed enabled from here on */
+	mb();
+}
+
+static void bnx2x_int_enable(struct bnx2x_softc *sc)
+{
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		bnx2x_hc_int_enable(sc);
+	} else {
+		bnx2x_igu_int_enable(sc);
+	}
+}
+
+static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+	uint32_t val = REG_RD(sc, addr);
+
+	val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+		 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+		 HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+	/* flush all outstanding writes */
+	mb();
+
+	REG_WR(sc, addr, val);
+	if (REG_RD(sc, addr) != val) {
+		PMD_DRV_LOG(ERR, sc, "proper val not read from HC IGU!");
+	}
+}
+
+static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
+{
+	uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+	val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
+		 IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);
+
+	PMD_DRV_LOG(DEBUG, sc, "write %x to IGU", val);
+
+	/* flush all outstanding writes */
+	mb();
+
+	REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+	if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
+		PMD_DRV_LOG(ERR, sc, "proper val not read from IGU!");
+	}
+}
+
+static void bnx2x_int_disable(struct bnx2x_softc *sc)
+{
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		bnx2x_hc_int_disable(sc);
+	} else {
+		bnx2x_igu_int_disable(sc);
+	}
+}
+
+static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
+{
+	int i;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	for (i = 0; i < sc->num_queues; i++) {
+		bnx2x_init_eth_fp(sc, i);
+	}
+
+	rmb();			/* ensure status block indices were read */
+
+	bnx2x_init_rx_rings(sc);
+	bnx2x_init_tx_rings(sc);
+
+	if (IS_VF(sc)) {
+		bnx2x_memset_stats(sc);
+		return;
+	}
+
+	/* initialize MOD_ABS interrupts */
+	elink_init_mod_abs_int(sc, &sc->link_vars,
+			       sc->devinfo.chip_id,
+			       sc->devinfo.shmem_base,
+			       sc->devinfo.shmem2_base, SC_PORT(sc));
+
+	bnx2x_init_def_sb(sc);
+	bnx2x_update_dsb_idx(sc);
+	bnx2x_init_sp_ring(sc);
+	bnx2x_init_eq_ring(sc);
+	bnx2x_init_internal(sc, load_code);
+	bnx2x_pf_init(sc);
+	bnx2x_stats_init(sc);
+
+	/* flush all before enabling interrupts */
+	mb();
+
+	bnx2x_int_enable(sc);
+
+	/* check for SPIO5 */
+	bnx2x_attn_int_deasserted0(sc,
+				 REG_RD(sc,
+					(MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
+					 SC_PORT(sc) * 4)) &
+				 AEU_INPUTS_ATTN_BITS_SPIO5);
+}
+
+static void bnx2x_init_objs(struct bnx2x_softc *sc)
+{
+	/* mcast rules must be added to tx if tx switching is enabled */
+	ecore_obj_type o_type;
+	if (sc->flags & BNX2X_TX_SWITCHING)
+		o_type = ECORE_OBJ_TYPE_RX_TX;
+	else
+		o_type = ECORE_OBJ_TYPE_RX;
+
+	/* RX_MODE controlling object */
+	ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
+
+	/* multicast configuration controlling object */
+	ecore_init_mcast_obj(sc,
+			     &sc->mcast_obj,
+			     sc->fp[0].cl_id,
+			     sc->fp[0].index,
+			     SC_FUNC(sc),
+			     SC_FUNC(sc),
+			     BNX2X_SP(sc, mcast_rdata),
+			     (rte_iova_t)BNX2X_SP_MAPPING(sc, mcast_rdata),
+			     ECORE_FILTER_MCAST_PENDING,
+			     &sc->sp_state, o_type);
+
+	/* Setup CAM credit pools */
+	ecore_init_mac_credit_pool(sc,
+				   &sc->macs_pool,
+				   SC_FUNC(sc),
+				   CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
+				   VNICS_PER_PATH(sc));
+
+	ecore_init_vlan_credit_pool(sc,
+				    &sc->vlans_pool,
+				    SC_ABS_FUNC(sc) >> 1,
+				    CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
+				    VNICS_PER_PATH(sc));
+
+	/* RSS configuration object */
+	ecore_init_rss_config_obj(sc, &sc->rss_conf_obj, sc->fp->cl_id,
+				  sc->fp->index, SC_FUNC(sc), SC_FUNC(sc),
+				  BNX2X_SP(sc, rss_rdata),
+				  (rte_iova_t)BNX2X_SP_MAPPING(sc, rss_rdata),
+				  ECORE_FILTER_RSS_CONF_PENDING, &sc->sp_state,
+				  ECORE_OBJ_TYPE_RX);
+}
+
+/*
+ * Initialize the function. This must be called before sending CLIENT_SETUP
+ * for the first client.
+ */
+static int bnx2x_func_start(struct bnx2x_softc *sc)
+{
+	struct ecore_func_state_params func_params = { NULL };
+	struct ecore_func_start_params *start_params =
+	    &func_params.params.start;
+
+	/* Prepare parameters for function state transitions */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+	func_params.f_obj = &sc->func_obj;
+	func_params.cmd = ECORE_F_CMD_START;
+
+	/* Function parameters */
+	start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
+	start_params->sd_vlan_tag = OVLAN(sc);
+
+	if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
+		start_params->network_cos_mode = STATIC_COS;
+	} else {		/* CHIP_IS_E1X */
+		start_params->network_cos_mode = FW_WRR;
+	}
+
+	return ecore_func_state_change(sc, &func_params);
+}
+
+static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
+{
+	uint16_t pmcsr;
+
+	/* If there is no power capability, silently succeed */
+	if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
+		PMD_DRV_LOG(INFO, sc, "No power capability");
+		return 0;
+	}
+
+	pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
+		 2);
+
+	switch (state) {
+	case PCI_PM_D0:
+		pci_write_word(sc,
+			       (sc->devinfo.pcie_pm_cap_reg +
+				PCIR_POWER_STATUS),
+			       ((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
+
+		if (pmcsr & PCIM_PSTAT_DMASK) {
+			/* delay required during transition out of D3hot */
+			DELAY(20000);
+		}
+
+		break;
+
+	case PCI_PM_D3hot:
+		/* don't shut down the power for emulation and FPGA */
+		if (CHIP_REV_IS_SLOW(sc)) {
+			return 0;
+		}
+
+		pmcsr &= ~PCIM_PSTAT_DMASK;
+		pmcsr |= PCIM_PSTAT_D3;
+
+		if (sc->wol) {
+			pmcsr |= PCIM_PSTAT_PMEENABLE;
+		}
+
+		pci_write_long(sc,
+			       (sc->devinfo.pcie_pm_cap_reg +
+				PCIR_POWER_STATUS), pmcsr);
+
+		/*
+		 * No more memory access after this point until device is brought back
+		 * to D0 state.
+		 */
+		break;
+
+	default:
+		PMD_DRV_LOG(NOTICE, sc, "Can't support PCI power state = %d",
+			    state);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* return true if succeeded to acquire the lock */
+static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+	uint32_t lock_status;
+	uint32_t resource_bit = (1 << resource);
+	int func = SC_FUNC(sc);
+	uint32_t hw_lock_control_reg;
+
+	/* Validating that the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		PMD_DRV_LOG(INFO, sc,
+			    "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
+			    resource, HW_LOCK_MAX_RESOURCE_VALUE);
+		return FALSE;
+	}
+
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
+	} else {
+		hw_lock_control_reg =
+		    (MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
+	}
+
+	/* try to acquire the lock */
+	REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
+	lock_status = REG_RD(sc, hw_lock_control_reg);
+	if (lock_status & resource_bit) {
+		return TRUE;
+	}
+
+	PMD_DRV_LOG(NOTICE, sc, "Failed to get a resource lock 0x%x", resource);
+
+	return FALSE;
+}
+
+/*
+ * Get the recovery leader resource id according to the engine this function
+ * belongs to. Currently only only 2 engines is supported.
+ */
+static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
+{
+	if (SC_PATH(sc)) {
+		return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
+	} else {
+		return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
+	}
+}
+
+/* try to acquire a leader lock for current engine */
+static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
+{
+	return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
+}
+
+static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
+{
+	return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
+}
+
+/* close gates #2, #3 and #4 */
+static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
+{
+	uint32_t val;
+
+	/* gates #2 and #4a are closed/opened */
+	/* #4 */
+	REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
+	/* #2 */
+	REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);
+
+	/* #3 */
+	if (CHIP_IS_E1x(sc)) {
+/* prevent interrupts from HC on both ports */
+		val = REG_RD(sc, HC_REG_CONFIG_1);
+		if (close)
+			REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
+						     HC_CONFIG_1_REG_BLOCK_DISABLE_1));
+		else
+			REG_WR(sc, HC_REG_CONFIG_1,
+			       (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));
+
+		val = REG_RD(sc, HC_REG_CONFIG_0);
+		if (close)
+			REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
+						     HC_CONFIG_0_REG_BLOCK_DISABLE_0));
+		else
+			REG_WR(sc, HC_REG_CONFIG_0,
+			       (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
+
+	} else {
+/* Prevent incoming interrupts in IGU */
+		val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
+
+		if (close)
+			REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
+			       (val & ~(uint32_t)
+				IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
+		else
+			REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
+			       (val |
+				IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
+	}
+
+	wmb();
+}
+
+/* poll for pending writes bit, it should get cleared in no more than 1s */
+static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
+{
+	uint32_t cnt = 1000;
+	uint32_t pend_bits = 0;
+
+	do {
+		pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
+
+		if (pend_bits == 0) {
+			break;
+		}
+
+		DELAY(1000);
+	} while (cnt-- > 0);
+
+	if (cnt <= 0) {
+		PMD_DRV_LOG(NOTICE, sc, "Still pending IGU requests bits=0x%08x!",
+			    pend_bits);
+		return -1;
+	}
+
+	return 0;
+}
+
+#define SHARED_MF_CLP_MAGIC  0x80000000	/* 'magic' bit */
+
+static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
+{
+	/* Do some magic... */
+	uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
+	*magic_val = val & SHARED_MF_CLP_MAGIC;
+	MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
+}
+
+/* restore the value of the 'magic' bit */
+static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
+{
+	/* Restore the 'magic' bit value... */
+	uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
+	MFCFG_WR(sc, shared_mf_config.clp_mb,
+		 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
+}
+
+/* prepare for MCP reset, takes care of CLP configurations */
+static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
+{
+	uint32_t shmem;
+	uint32_t validity_offset;
+
+	/* set `magic' bit in order to save MF config */
+	bnx2x_clp_reset_prep(sc, magic_val);
+
+	/* get shmem offset */
+	shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+	validity_offset =
+	    offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
+
+	/* Clear validity map flags */
+	if (shmem > 0) {
+		REG_WR(sc, shmem + validity_offset, 0);
+	}
+}
+
+#define MCP_TIMEOUT      5000	/* 5 seconds (in ms) */
+#define MCP_ONE_TIMEOUT  100	/* 100 ms */
+
+static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
+{
+	/* special handling for emulation and FPGA (10 times longer) */
+	if (CHIP_REV_IS_SLOW(sc)) {
+		DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
+	} else {
+		DELAY((MCP_ONE_TIMEOUT) * 1000);
+	}
+}
+
+/* initialize shmem_base and waits for validity signature to appear */
+static int bnx2x_init_shmem(struct bnx2x_softc *sc)
+{
+	int cnt = 0;
+	uint32_t val = 0;
+
+	do {
+		sc->devinfo.shmem_base =
+		    sc->link_params.shmem_base =
+		    REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+
+		if (sc->devinfo.shmem_base) {
+			val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
+			if (val & SHR_MEM_VALIDITY_MB)
+				return 0;
+		}
+
+		bnx2x_mcp_wait_one(sc);
+
+	} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
+
+	PMD_DRV_LOG(NOTICE, sc, "BAD MCP validity signature");
+
+	return -1;
+}
+
+static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
+{
+	int rc = bnx2x_init_shmem(sc);
+
+	/* Restore the `magic' bit value */
+	bnx2x_clp_reset_done(sc, magic_val);
+
+	return rc;
+}
+
+static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
+{
+	REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
+	REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
+	wmb();
+}
+
+/*
+ * Reset the whole chip except for:
+ *      - PCIE core
+ *      - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
+ *      - IGU
+ *      - MISC (including AEU)
+ *      - GRC
+ *      - RBCN, RBCP
+ */
+static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
+{
+	uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
+	uint32_t global_bits2, stay_reset2;
+
+	/*
+	 * Bits that have to be set in reset_mask2 if we want to reset 'global'
+	 * (per chip) blocks.
+	 */
+	global_bits2 =
+	    MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
+	    MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
+
+	/*
+	 * Don't reset the following blocks.
+	 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
+	 *            reset, as in 4 port device they might still be owned
+	 *            by the MCP (there is only one leader per path).
+	 */
+	not_reset_mask1 =
+	    MISC_REGISTERS_RESET_REG_1_RST_HC |
+	    MISC_REGISTERS_RESET_REG_1_RST_PXPV |
+	    MISC_REGISTERS_RESET_REG_1_RST_PXP;
+
+	not_reset_mask2 =
+	    MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
+	    MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
+	    MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
+	    MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
+	    MISC_REGISTERS_RESET_REG_2_RST_RBCN |
+	    MISC_REGISTERS_RESET_REG_2_RST_GRC |
+	    MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
+	    MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
+	    MISC_REGISTERS_RESET_REG_2_RST_ATC |
+	    MISC_REGISTERS_RESET_REG_2_PGLC |
+	    MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
+	    MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
+	    MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
+	    MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
+	    MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;
+
+	/*
+	 * Keep the following blocks in reset:
+	 *  - all xxMACs are handled by the elink code.
+	 */
+	stay_reset2 =
+	    MISC_REGISTERS_RESET_REG_2_XMAC |
+	    MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
+
+	/* Full reset masks according to the chip */
+	reset_mask1 = 0xffffffff;
+
+	if (CHIP_IS_E1H(sc))
+		reset_mask2 = 0x1ffff;
+	else if (CHIP_IS_E2(sc))
+		reset_mask2 = 0xfffff;
+	else			/* CHIP_IS_E3 */
+		reset_mask2 = 0x3ffffff;
+
+	/* Don't reset global blocks unless we need to */
+	if (!global)
+		reset_mask2 &= ~global_bits2;
+
+	/*
+	 * In case of attention in the QM, we need to reset PXP
+	 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
+	 * because otherwise QM reset would release 'close the gates' shortly
+	 * before resetting the PXP, then the PSWRQ would send a write
+	 * request to PGLUE. Then when PXP is reset, PGLUE would try to
+	 * read the payload data from PSWWR, but PSWWR would not
+	 * respond. The write queue in PGLUE would stuck, dmae commands
+	 * would not return. Therefore it's important to reset the second
+	 * reset register (containing the
+	 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
+	 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
+	 * bit).
+	 */
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       reset_mask2 & (~not_reset_mask2));
+
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       reset_mask1 & (~not_reset_mask1));
+
+	mb();
+	wmb();
+
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+	       reset_mask2 & (~stay_reset2));
+
+	mb();
+	wmb();
+
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
+	wmb();
+}
+
+static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
+{
+	int cnt = 1000;
+	uint32_t val = 0;
+	uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
+	uint32_t tags_63_32 = 0;
+
+	/* Empty the Tetris buffer, wait for 1s */
+	do {
+		sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
+		blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
+		port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
+		port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
+		pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
+		if (CHIP_IS_E3(sc)) {
+			tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
+		}
+
+		if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
+		    ((port_is_idle_0 & 0x1) == 0x1) &&
+		    ((port_is_idle_1 & 0x1) == 0x1) &&
+		    (pgl_exp_rom2 == 0xffffffff) &&
+		    (!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
+			break;
+		DELAY(1000);
+	} while (cnt-- > 0);
+
+	if (cnt <= 0) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "ERROR: Tetris buffer didn't get empty or there "
+			    "are still outstanding read requests after 1s! "
+			    "sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
+			    "port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
+			    sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
+			    pgl_exp_rom2);
+		return -1;
+	}
+
+	mb();
+
+	/* Close gates #2, #3 and #4 */
+	bnx2x_set_234_gates(sc, TRUE);
+
+	/* Poll for IGU VQs for 57712 and newer chips */
+	if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
+		return -1;
+	}
+
+	/* clear "unprepared" bit */
+	REG_WR(sc, MISC_REG_UNPREPARED, 0);
+	mb();
+
+	/* Make sure all is written to the chip before the reset */
+	wmb();
+
+	/*
+	 * Wait for 1ms to empty GLUE and PCI-E core queues,
+	 * PSWHST, GRC and PSWRD Tetris buffer.
+	 */
+	DELAY(1000);
+
+	/* Prepare to chip reset: */
+	/* MCP */
+	if (global) {
+		bnx2x_reset_mcp_prep(sc, &val);
+	}
+
+	/* PXP */
+	bnx2x_pxp_prep(sc);
+	mb();
+
+	/* reset the chip */
+	bnx2x_process_kill_chip_reset(sc, global);
+	mb();
+
+	/* Recover after reset: */
+	/* MCP */
+	if (global && bnx2x_reset_mcp_comp(sc, val)) {
+		return -1;
+	}
+
+	/* Open the gates #2, #3 and #4 */
+	bnx2x_set_234_gates(sc, FALSE);
+
+	return 0;
+}
+
+static int bnx2x_leader_reset(struct bnx2x_softc *sc)
+{
+	int rc = 0;
+	uint8_t global = bnx2x_reset_is_global(sc);
+	uint32_t load_code;
+
+	/*
+	 * If not going to reset MCP, load "fake" driver to reset HW while
+	 * driver is owner of the HW.
+	 */
+	if (!global && !BNX2X_NOMCP(sc)) {
+		load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
+					   DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+		if (!load_code) {
+			PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
+			rc = -1;
+			goto exit_leader_reset;
+		}
+
+		if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
+		    (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "MCP unexpected response, aborting");
+			rc = -1;
+			goto exit_leader_reset2;
+		}
+
+		load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+		if (!load_code) {
+			PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
+			rc = -1;
+			goto exit_leader_reset2;
+		}
+	}
+
+	/* try to recover after the failure */
+	if (bnx2x_process_kill(sc, global)) {
+		PMD_DRV_LOG(NOTICE, sc, "Something bad occurred on engine %d!",
+			    SC_PATH(sc));
+		rc = -1;
+		goto exit_leader_reset2;
+	}
+
+	/*
+	 * Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
+	 * state.
+	 */
+	bnx2x_set_reset_done(sc);
+	if (global) {
+		bnx2x_clear_reset_global(sc);
+	}
+
+exit_leader_reset2:
+
+	/* unload "fake driver" if it was loaded */
+	if (!global &&!BNX2X_NOMCP(sc)) {
+		bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+		bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
+	}
+
+exit_leader_reset:
+
+	sc->is_leader = 0;
+	bnx2x_release_leader_lock(sc);
+
+	mb();
+	return rc;
+}
+
+/*
+ * prepare INIT transition, parameters configured:
+ *   - HC configuration
+ *   - Queue's CDU context
+ */
+static void
+bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+		   struct ecore_queue_init_params *init_params)
+{
+	uint8_t cos;
+	int cxt_index, cxt_offset;
+
+	bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
+	bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
+
+	bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
+	bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
+
+	/* HC rate */
+	init_params->rx.hc_rate =
+	    sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
+	init_params->tx.hc_rate =
+	    sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
+
+	/* FW SB ID */
+	init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
+
+	/* CQ index among the SB indices */
+	init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+	init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
+
+	/* set maximum number of COSs supported by this queue */
+	init_params->max_cos = sc->max_cos;
+
+	/* set the context pointers queue object */
+	for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
+		cxt_index = fp->index / ILT_PAGE_CIDS;
+		cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
+		init_params->cxts[cos] =
+		    &sc->context[cxt_index].vcxt[cxt_offset].eth;
+	}
+}
+
+/* set flags that are common for the Tx-only and not normal connections */
+static unsigned long
+bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
+{
+	unsigned long flags = 0;
+
+	/* PF driver will always initialize the Queue to an ACTIVE state */
+	bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
+
+	/*
+	 * tx only connections collect statistics (on the same index as the
+	 * parent connection). The statistics are zeroed when the parent
+	 * connection is initialized.
+	 */
+
+	bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
+	if (zero_stats) {
+		bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
+	}
+
+	/*
+	 * tx only connections can support tx-switching, though their
+	 * CoS-ness doesn't survive the loopback
+	 */
+	if (sc->flags & BNX2X_TX_SWITCHING) {
+		bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
+	}
+
+	bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
+
+	return flags;
+}
+
+static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
+{
+	unsigned long flags = 0;
+
+	if (IS_MF_SD(sc)) {
+		bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
+	}
+
+	if (leading) {
+		bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
+		bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
+	}
+
+	bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
+
+	/* merge with common flags */
+	return flags | bnx2x_get_common_flags(sc, TRUE);
+}
+
+static void
+bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+		      struct ecore_general_setup_params *gen_init, uint8_t cos)
+{
+	gen_init->stat_id = bnx2x_stats_id(fp);
+	gen_init->spcl_id = fp->cl_id;
+	gen_init->mtu = sc->mtu;
+	gen_init->cos = cos;
+}
+
+static void
+bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+		 struct rxq_pause_params *pause,
+		 struct ecore_rxq_setup_params *rxq_init)
+{
+	struct bnx2x_rx_queue *rxq;
+
+	rxq = sc->rx_queues[fp->index];
+	if (!rxq) {
+		PMD_RX_LOG(ERR, "RX queue is NULL");
+		return;
+	}
+	/* pause */
+	pause->bd_th_lo = BD_TH_LO(sc);
+	pause->bd_th_hi = BD_TH_HI(sc);
+
+	pause->rcq_th_lo = RCQ_TH_LO(sc);
+	pause->rcq_th_hi = RCQ_TH_HI(sc);
+
+	/* validate rings have enough entries to cross high thresholds */
+	if (sc->dropless_fc &&
+	    pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
+		PMD_DRV_LOG(WARNING, sc, "rx bd ring threshold limit");
+	}
+
+	if (sc->dropless_fc &&
+	    pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
+		PMD_DRV_LOG(WARNING, sc, "rcq ring threshold limit");
+	}
+
+	pause->pri_map = 1;
+
+	/* rxq setup */
+	rxq_init->dscr_map = (rte_iova_t)rxq->rx_ring_phys_addr;
+	rxq_init->rcq_map = (rte_iova_t)rxq->cq_ring_phys_addr;
+	rxq_init->rcq_np_map = (rte_iova_t)(rxq->cq_ring_phys_addr +
+					      BNX2X_PAGE_SIZE);
+
+	/*
+	 * This should be a maximum number of data bytes that may be
+	 * placed on the BD (not including paddings).
+	 */
+	rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);
+
+	rxq_init->cl_qzone_id = fp->cl_qzone_id;
+	rxq_init->rss_engine_id = SC_FUNC(sc);
+	rxq_init->mcast_engine_id = SC_FUNC(sc);
+
+	rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
+	rxq_init->fw_sb_id = fp->fw_sb_id;
+
+	rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+
+	/*
+	 * configure silent vlan removal
+	 * if multi function mode is afex, then mask default vlan
+	 */
+	if (IS_MF_AFEX(sc)) {
+		rxq_init->silent_removal_value =
+		    sc->devinfo.mf_info.afex_def_vlan_tag;
+		rxq_init->silent_removal_mask = EVL_VLID_MASK;
+	}
+}
+
+static void
+bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+		 struct ecore_txq_setup_params *txq_init, uint8_t cos)
+{
+	struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+	if (!txq) {
+		PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+		return;
+	}
+	txq_init->dscr_map = (rte_iova_t)txq->tx_ring_phys_addr;
+	txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
+	txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
+	txq_init->fw_sb_id = fp->fw_sb_id;
+
+	/*
+	 * set the TSS leading client id for TX classfication to the
+	 * leading RSS client id
+	 */
+	txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
+}
+
+/*
+ * This function performs 2 steps in a queue state machine:
+ *   1) RESET->INIT
+ *   2) INIT->SETUP
+ */
+static int
+bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
+{
+	struct ecore_queue_state_params q_params = { NULL };
+	struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
+	int rc;
+
+	PMD_DRV_LOG(DEBUG, sc, "setting up queue %d", fp->index);
+
+	bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
+
+	q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
+
+	/* we want to wait for completion in this context */
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+	/* prepare the INIT parameters */
+	bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
+
+	/* Set the command */
+	q_params.cmd = ECORE_Q_CMD_INIT;
+
+	/* Change the state to INIT */
+	rc = ecore_queue_state_change(sc, &q_params);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Queue(%d) INIT failed", fp->index);
+		return rc;
+	}
+
+	PMD_DRV_LOG(DEBUG, sc, "init complete");
+
+	/* now move the Queue to the SETUP state */
+	memset(setup_params, 0, sizeof(*setup_params));
+
+	/* set Queue flags */
+	setup_params->flags = bnx2x_get_q_flags(sc, leading);
+
+	/* set general SETUP parameters */
+	bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
+			      FIRST_TX_COS_INDEX);
+
+	bnx2x_pf_rx_q_prep(sc, fp,
+			 &setup_params->pause_params,
+			 &setup_params->rxq_params);
+
+	bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);
+
+	/* Set the command */
+	q_params.cmd = ECORE_Q_CMD_SETUP;
+
+	/* change the state to SETUP */
+	rc = ecore_queue_state_change(sc, &q_params);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Queue(%d) SETUP failed", fp->index);
+		return rc;
+	}
+
+	return rc;
+}
+
+static int bnx2x_setup_leading(struct bnx2x_softc *sc)
+{
+	if (IS_PF(sc))
+		return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
+	else			/* VF */
+		return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
+}
+
+static int
+bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
+		  uint8_t config_hash)
+{
+	struct ecore_config_rss_params params = { NULL };
+	uint32_t i;
+
+	/*
+	 * Although RSS is meaningless when there is a single HW queue we
+	 * still need it enabled in order to have HW Rx hash generated.
+	 */
+
+	params.rss_obj = rss_obj;
+
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &params.ramrod_flags);
+
+	bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, &params.rss_flags);
+
+	/* RSS configuration */
+	bnx2x_set_bit(ECORE_RSS_IPV4, &params.rss_flags);
+	bnx2x_set_bit(ECORE_RSS_IPV4_TCP, &params.rss_flags);
+	bnx2x_set_bit(ECORE_RSS_IPV6, &params.rss_flags);
+	bnx2x_set_bit(ECORE_RSS_IPV6_TCP, &params.rss_flags);
+	if (rss_obj->udp_rss_v4) {
+		bnx2x_set_bit(ECORE_RSS_IPV4_UDP, &params.rss_flags);
+	}
+	if (rss_obj->udp_rss_v6) {
+		bnx2x_set_bit(ECORE_RSS_IPV6_UDP, &params.rss_flags);
+	}
+
+	/* Hash bits */
+	params.rss_result_mask = MULTI_MASK;
+
+	rte_memcpy(params.ind_table, rss_obj->ind_table,
+			 sizeof(params.ind_table));
+
+	if (config_hash) {
+/* RSS keys */
+		for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
+			params.rss_key[i] = (uint32_t) rte_rand();
+		}
+
+		bnx2x_set_bit(ECORE_RSS_SET_SRCH, &params.rss_flags);
+	}
+
+	if (IS_PF(sc))
+		return ecore_config_rss(sc, &params);
+	else
+		return bnx2x_vf_config_rss(sc, &params);
+}
+
+static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
+{
+	return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
+}
+
+static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
+{
+	uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
+	uint32_t i;
+
+	/*
+	 * Prepare the initial contents of the indirection table if
+	 * RSS is enabled
+	 */
+	for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
+		sc->rss_conf_obj.ind_table[i] =
+		    (sc->fp->cl_id + (i % num_eth_queues));
+	}
+
+	if (sc->udp_rss) {
+		sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
+	}
+
+	/*
+	 * For 57711 SEARCHER configuration (rss_keys) is
+	 * per-port, so if explicit configuration is needed, do it only
+	 * for a PMF.
+	 *
+	 * For 57712 and newer it's a per-function configuration.
+	 */
+	return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
+}
+
+static int
+bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
+		struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
+		unsigned long *ramrod_flags)
+{
+	struct ecore_vlan_mac_ramrod_params ramrod_param;
+	int rc;
+
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+	/* fill in general parameters */
+	ramrod_param.vlan_mac_obj = obj;
+	ramrod_param.ramrod_flags = *ramrod_flags;
+
+	/* fill a user request section if needed */
+	if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
+		rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
+				 ETH_ALEN);
+
+		bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
+
+/* Set the command: ADD or DEL */
+		ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
+		    ECORE_VLAN_MAC_DEL;
+	}
+
+	rc = ecore_config_vlan_mac(sc, &ramrod_param);
+
+	if (rc == ECORE_EXISTS) {
+		PMD_DRV_LOG(INFO, sc, "Failed to schedule ADD operations (EEXIST)");
+/* do not treat adding same MAC as error */
+		rc = 0;
+	} else if (rc < 0) {
+		PMD_DRV_LOG(ERR, sc,
+			    "%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
+	}
+
+	return rc;
+}
+
+static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
+{
+	unsigned long ramrod_flags = 0;
+
+	PMD_DRV_LOG(DEBUG, sc, "Adding Ethernet MAC");
+
+	bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+
+	/* Eth MAC is set on RSS leading client (fp[0]) */
+	return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
+			       &sc->sp_objs->mac_obj,
+			       set, ECORE_ETH_MAC, &ramrod_flags);
+}
+
+static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
+{
+	uint32_t sel_phy_idx = 0;
+
+	if (sc->link_params.num_phys <= 1) {
+		return ELINK_INT_PHY;
+	}
+
+	if (sc->link_vars.link_up) {
+		sel_phy_idx = ELINK_EXT_PHY1;
+/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
+		if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
+		    (sc->link_params.phy[ELINK_EXT_PHY2].supported &
+		     ELINK_SUPPORTED_FIBRE))
+			sel_phy_idx = ELINK_EXT_PHY2;
+	} else {
+		switch (elink_phy_selection(&sc->link_params)) {
+		case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+			sel_phy_idx = ELINK_EXT_PHY1;
+			break;
+		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+			sel_phy_idx = ELINK_EXT_PHY2;
+			break;
+		}
+	}
+
+	return sel_phy_idx;
+}
+
+static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
+{
+	uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);
+
+	/*
+	 * The selected activated PHY is always after swapping (in case PHY
+	 * swapping is enabled). So when swapping is enabled, we need to reverse
+	 * the configuration
+	 */
+
+	if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+		if (sel_phy_idx == ELINK_EXT_PHY1)
+			sel_phy_idx = ELINK_EXT_PHY2;
+		else if (sel_phy_idx == ELINK_EXT_PHY2)
+			sel_phy_idx = ELINK_EXT_PHY1;
+	}
+
+	return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
+}
+
+static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
+{
+	/*
+	 * Initialize link parameters structure variables
+	 * It is recommended to turn off RX FC for jumbo frames
+	 * for better performance
+	 */
+	if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
+		sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
+	} else {
+		sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
+	}
+}
+
+static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
+{
+	uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
+	switch (sc->link_vars.ieee_fc &
+		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
+	default:
+		sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
+						   ADVERTISED_Pause);
+		break;
+
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
+		sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
+						  ADVERTISED_Pause);
+		break;
+
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
+		sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
+		break;
+	}
+}
+
+static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
+{
+	uint16_t line_speed = sc->link_vars.line_speed;
+	if (IS_MF(sc)) {
+		uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
+						      sc->devinfo.
+						      mf_info.mf_config[SC_VN
+									(sc)]);
+
+/* calculate the current MAX line speed limit for the MF devices */
+		if (IS_MF_SI(sc)) {
+			line_speed = (line_speed * maxCfg) / 100;
+		} else {	/* SD mode */
+			uint16_t vn_max_rate = maxCfg * 100;
+
+			if (vn_max_rate < line_speed) {
+				line_speed = vn_max_rate;
+			}
+		}
+	}
+
+	return line_speed;
+}
+
+static void
+bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
+{
+	uint16_t line_speed = bnx2x_get_mf_speed(sc);
+
+	memset(data, 0, sizeof(*data));
+
+	/* fill the report data with the effective line speed */
+	data->line_speed = line_speed;
+
+	/* Link is down */
+	if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
+		bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+			    &data->link_report_flags);
+	}
+
+	/* Full DUPLEX */
+	if (sc->link_vars.duplex == DUPLEX_FULL) {
+		bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+			    &data->link_report_flags);
+	}
+
+	/* Rx Flow Control is ON */
+	if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
+		bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+	}
+
+	/* Tx Flow Control is ON */
+	if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
+		bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+	}
+}
+
+/* report link status to OS, should be called under phy_lock */
+static void bnx2x_link_report_locked(struct bnx2x_softc *sc)
+{
+	struct bnx2x_link_report_data cur_data;
+
+	/* reread mf_cfg */
+	if (IS_PF(sc)) {
+		bnx2x_read_mf_cfg(sc);
+	}
+
+	/* Read the current link report info */
+	bnx2x_fill_report_data(sc, &cur_data);
+
+	/* Don't report link down or exactly the same link status twice */
+	if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
+	    (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+			  &sc->last_reported_link.link_report_flags) &&
+	     bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+			  &cur_data.link_report_flags))) {
+		return;
+	}
+
+	ELINK_DEBUG_P2(sc, "Change in link status : cur_data = %lx, last_reported_link = %lx",
+		       cur_data.link_report_flags,
+		       sc->last_reported_link.link_report_flags);
+
+	sc->link_cnt++;
+
+	ELINK_DEBUG_P1(sc, "link status change count = %x", sc->link_cnt);
+	/* report new link params and remember the state for the next time */
+	rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
+
+	if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+			 &cur_data.link_report_flags)) {
+		ELINK_DEBUG_P0(sc, "NIC Link is Down");
+	} else {
+		__rte_unused const char *duplex;
+		__rte_unused const char *flow;
+
+		if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+					   &cur_data.link_report_flags)) {
+			duplex = "full";
+				ELINK_DEBUG_P0(sc, "link set to full duplex");
+		} else {
+			duplex = "half";
+				ELINK_DEBUG_P0(sc, "link set to half duplex");
+		}
+
+/*
+ * Handle the FC at the end so that only these flags would be
+ * possibly set. This way we may easily check if there is no FC
+ * enabled.
+ */
+		if (cur_data.link_report_flags) {
+			if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+					 &cur_data.link_report_flags) &&
+			    bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+					 &cur_data.link_report_flags)) {
+				flow = "ON - receive & transmit";
+			} else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+						&cur_data.link_report_flags) &&
+				   !bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+						 &cur_data.link_report_flags)) {
+				flow = "ON - receive";
+			} else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+						 &cur_data.link_report_flags) &&
+				   bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+						&cur_data.link_report_flags)) {
+				flow = "ON - transmit";
+			} else {
+				flow = "none";	/* possible? */
+			}
+		} else {
+			flow = "none";
+		}
+
+		PMD_DRV_LOG(INFO, sc,
+			    "NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
+			    cur_data.line_speed, duplex, flow);
+	}
+}
+
+static void
+bnx2x_link_report(struct bnx2x_softc *sc)
+{
+	bnx2x_acquire_phy_lock(sc);
+	bnx2x_link_report_locked(sc);
+	bnx2x_release_phy_lock(sc);
+}
+
+void bnx2x_link_status_update(struct bnx2x_softc *sc)
+{
+	if (sc->state != BNX2X_STATE_OPEN) {
+		return;
+	}
+
+	if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
+		elink_link_status_update(&sc->link_params, &sc->link_vars);
+	} else {
+		sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
+					  ELINK_SUPPORTED_10baseT_Full |
+					  ELINK_SUPPORTED_100baseT_Half |
+					  ELINK_SUPPORTED_100baseT_Full |
+					  ELINK_SUPPORTED_1000baseT_Full |
+					  ELINK_SUPPORTED_2500baseX_Full |
+					  ELINK_SUPPORTED_10000baseT_Full |
+					  ELINK_SUPPORTED_TP |
+					  ELINK_SUPPORTED_FIBRE |
+					  ELINK_SUPPORTED_Autoneg |
+					  ELINK_SUPPORTED_Pause |
+					  ELINK_SUPPORTED_Asym_Pause);
+		sc->port.advertising[0] = sc->port.supported[0];
+
+		sc->link_params.sc = sc;
+		sc->link_params.port = SC_PORT(sc);
+		sc->link_params.req_duplex[0] = DUPLEX_FULL;
+		sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
+		sc->link_params.req_line_speed[0] = SPEED_10000;
+		sc->link_params.speed_cap_mask[0] = 0x7f0000;
+		sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
+
+		if (CHIP_REV_IS_FPGA(sc)) {
+			sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
+			sc->link_vars.line_speed = ELINK_SPEED_1000;
+			sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
+						     LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
+		} else {
+			sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
+			sc->link_vars.line_speed = ELINK_SPEED_10000;
+			sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
+						     LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
+		}
+
+		sc->link_vars.link_up = 1;
+
+		sc->link_vars.duplex = DUPLEX_FULL;
+		sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
+
+		if (IS_PF(sc)) {
+			REG_WR(sc,
+			       NIG_REG_EGRESS_DRAIN0_MODE +
+			       sc->link_params.port * 4, 0);
+			bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+			bnx2x_link_report(sc);
+		}
+	}
+
+	if (IS_PF(sc)) {
+		if (sc->link_vars.link_up) {
+			bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+		} else {
+			bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+		}
+		bnx2x_link_report(sc);
+	} else {
+		bnx2x_link_report_locked(sc);
+		bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+	}
+}
+
+static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
+{
+	int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
+	uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
+	struct elink_params *lp = &sc->link_params;
+
+	bnx2x_set_requested_fc(sc);
+
+	bnx2x_acquire_phy_lock(sc);
+
+	if (load_mode == LOAD_DIAG) {
+		lp->loopback_mode = ELINK_LOOPBACK_XGXS;
+/* Prefer doing PHY loopback at 10G speed, if possible */
+		if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
+			if (lp->speed_cap_mask[cfg_idx] &
+			    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+				lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
+			} else {
+				lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
+			}
+		}
+	}
+
+	if (load_mode == LOAD_LOOPBACK_EXT) {
+		lp->loopback_mode = ELINK_LOOPBACK_EXT;
+	}
+
+	rc = elink_phy_init(&sc->link_params, &sc->link_vars);
+
+	bnx2x_release_phy_lock(sc);
+
+	bnx2x_calc_fc_adv(sc);
+
+	if (sc->link_vars.link_up) {
+		bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+		bnx2x_link_report(sc);
+	}
+
+	sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
+	return rc;
+}
+
+/* update flags in shmem */
+static void
+bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
+{
+	uint32_t drv_flags;
+
+	if (SHMEM2_HAS(sc, drv_flags)) {
+		bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
+		drv_flags = SHMEM2_RD(sc, drv_flags);
+
+		if (set) {
+			drv_flags |= flags;
+		} else {
+			drv_flags &= ~flags;
+		}
+
+		SHMEM2_WR(sc, drv_flags, drv_flags);
+
+		bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
+	}
+}
+
+/* periodic timer callout routine, only runs when the interface is up */
+void bnx2x_periodic_callout(struct bnx2x_softc *sc)
+{
+	if ((sc->state != BNX2X_STATE_OPEN) ||
+	    (atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
+		PMD_DRV_LOG(DEBUG, sc, "periodic callout exit (state=0x%x)",
+			    sc->state);
+		return;
+	}
+	if (!CHIP_REV_IS_SLOW(sc)) {
+/*
+ * This barrier is needed to ensure the ordering between the writing
+ * to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
+ * the reading here.
+ */
+		mb();
+		if (sc->port.pmf) {
+			bnx2x_acquire_phy_lock(sc);
+			elink_period_func(&sc->link_params, &sc->link_vars);
+			bnx2x_release_phy_lock(sc);
+		}
+	}
+#ifdef BNX2X_PULSE
+	if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+		int mb_idx = SC_FW_MB_IDX(sc);
+		uint32_t drv_pulse;
+		uint32_t mcp_pulse;
+
+		++sc->fw_drv_pulse_wr_seq;
+		sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
+
+		drv_pulse = sc->fw_drv_pulse_wr_seq;
+		bnx2x_drv_pulse(sc);
+
+		mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
+			     MCP_PULSE_SEQ_MASK);
+
+/*
+ * The delta between driver pulse and mcp response should
+ * be 1 (before mcp response) or 0 (after mcp response).
+ */
+		if ((drv_pulse != mcp_pulse) &&
+		    (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
+			/* someone lost a heartbeat... */
+			PMD_DRV_LOG(ERR, sc,
+				    "drv_pulse (0x%x) != mcp_pulse (0x%x)",
+				    drv_pulse, mcp_pulse);
+		}
+	}
+#endif
+}
+
+/* start the controller */
+static __rte_noinline
+int bnx2x_nic_load(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	uint32_t load_code = 0;
+	int i, rc = 0;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;
+
+	if (IS_PF(sc)) {
+/* must be called before memory allocation and HW init */
+		bnx2x_ilt_set_info(sc);
+	}
+
+	bnx2x_set_fp_rx_buf_size(sc);
+
+	if (IS_PF(sc)) {
+		if (bnx2x_alloc_mem(sc) != 0) {
+			sc->state = BNX2X_STATE_CLOSED;
+			rc = -ENOMEM;
+			goto bnx2x_nic_load_error0;
+		}
+	}
+
+	/* allocate the host hardware/software hsi structures */
+	if (bnx2x_alloc_hsi_mem(sc) != 0) {
+		PMD_DRV_LOG(ERR, sc, "bnx2x_alloc_hsi_mem was failed");
+		sc->state = BNX2X_STATE_CLOSED;
+		rc = -ENOMEM;
+		goto bnx2x_nic_load_error0;
+	}
+
+	if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
+		sc->state = BNX2X_STATE_CLOSED;
+		rc = -ENOMEM;
+		goto bnx2x_nic_load_error0;
+	}
+
+	if (IS_VF(sc)) {
+		rc = bnx2x_vf_init(sc);
+		if (rc) {
+			sc->state = BNX2X_STATE_ERROR;
+			goto bnx2x_nic_load_error0;
+		}
+	}
+
+	if (IS_PF(sc)) {
+/* set pf load just before approaching the MCP */
+		bnx2x_set_pf_load(sc);
+
+/* if MCP exists send load request and analyze response */
+		if (!BNX2X_NOMCP(sc)) {
+			/* attempt to load pf */
+			if (bnx2x_nic_load_request(sc, &load_code) != 0) {
+				sc->state = BNX2X_STATE_CLOSED;
+				rc = -ENXIO;
+				goto bnx2x_nic_load_error1;
+			}
+
+			/* what did the MCP say? */
+			if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
+				bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+				sc->state = BNX2X_STATE_CLOSED;
+				rc = -ENXIO;
+				goto bnx2x_nic_load_error2;
+			}
+		} else {
+			PMD_DRV_LOG(INFO, sc, "Device has no MCP!");
+			load_code = bnx2x_nic_load_no_mcp(sc);
+		}
+
+/* mark PMF if applicable */
+		bnx2x_nic_load_pmf(sc, load_code);
+
+/* Init Function state controlling object */
+		bnx2x_init_func_obj(sc);
+
+/* Initialize HW */
+		if (bnx2x_init_hw(sc, load_code) != 0) {
+			PMD_DRV_LOG(NOTICE, sc, "HW init failed");
+			bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+			sc->state = BNX2X_STATE_CLOSED;
+			rc = -ENXIO;
+			goto bnx2x_nic_load_error2;
+		}
+	}
+
+	bnx2x_nic_init(sc, load_code);
+
+	/* Init per-function objects */
+	if (IS_PF(sc)) {
+		bnx2x_init_objs(sc);
+
+/* set AFEX default VLAN tag to an invalid value */
+		sc->devinfo.mf_info.afex_def_vlan_tag = -1;
+
+		sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
+		rc = bnx2x_func_start(sc);
+		if (rc) {
+			PMD_DRV_LOG(NOTICE, sc, "Function start failed!");
+			bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+			sc->state = BNX2X_STATE_ERROR;
+			goto bnx2x_nic_load_error3;
+		}
+
+/* send LOAD_DONE command to MCP */
+		if (!BNX2X_NOMCP(sc)) {
+			load_code =
+			    bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+			if (!load_code) {
+				PMD_DRV_LOG(NOTICE, sc,
+					    "MCP response failure, aborting");
+				sc->state = BNX2X_STATE_ERROR;
+				rc = -ENXIO;
+				goto bnx2x_nic_load_error3;
+			}
+		}
+	}
+
+	rc = bnx2x_setup_leading(sc);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Setup leading failed!");
+		sc->state = BNX2X_STATE_ERROR;
+		goto bnx2x_nic_load_error3;
+	}
+
+	FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
+		if (IS_PF(sc))
+			rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
+		else		/* IS_VF(sc) */
+			rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);
+
+		if (rc) {
+			PMD_DRV_LOG(NOTICE, sc, "Queue(%d) setup failed", i);
+			sc->state = BNX2X_STATE_ERROR;
+			goto bnx2x_nic_load_error3;
+		}
+	}
+
+	rc = bnx2x_init_rss_pf(sc);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "PF RSS init failed");
+		sc->state = BNX2X_STATE_ERROR;
+		goto bnx2x_nic_load_error3;
+	}
+
+	/* now when Clients are configured we are ready to work */
+	sc->state = BNX2X_STATE_OPEN;
+
+	/* Configure a ucast MAC */
+	if (IS_PF(sc)) {
+		rc = bnx2x_set_eth_mac(sc, TRUE);
+	} else {		/* IS_VF(sc) */
+		rc = bnx2x_vf_set_mac(sc, TRUE);
+	}
+
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Setting Ethernet MAC failed");
+		sc->state = BNX2X_STATE_ERROR;
+		goto bnx2x_nic_load_error3;
+	}
+
+	if (sc->port.pmf) {
+		rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
+		if (rc) {
+			sc->state = BNX2X_STATE_ERROR;
+			goto bnx2x_nic_load_error3;
+		}
+	}
+
+	sc->link_params.feature_config_flags &=
+	    ~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
+
+	/* start the Tx */
+	switch (LOAD_OPEN) {
+	case LOAD_NORMAL:
+	case LOAD_OPEN:
+		break;
+
+	case LOAD_DIAG:
+	case LOAD_LOOPBACK_EXT:
+		sc->state = BNX2X_STATE_DIAG;
+		break;
+
+	default:
+		break;
+	}
+
+	if (sc->port.pmf) {
+		bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
+	} else {
+		bnx2x_link_status_update(sc);
+	}
+
+	if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
+/* mark driver is loaded in shmem2 */
+		val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
+		SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
+			  (val |
+			   DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
+			   DRV_FLAGS_CAPABILITIES_LOADED_L2));
+	}
+
+	/* start fast path */
+	/* Initialize Rx filter */
+	bnx2x_set_rx_mode(sc);
+
+	/* wait for all pending SP commands to complete */
+	if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
+		PMD_DRV_LOG(NOTICE, sc, "Timeout waiting for all SPs to complete!");
+		bnx2x_periodic_stop(sc);
+		bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
+		return -ENXIO;
+	}
+
+	PMD_DRV_LOG(DEBUG, sc, "NIC successfully loaded");
+
+	return 0;
+
+bnx2x_nic_load_error3:
+
+	if (IS_PF(sc)) {
+		bnx2x_int_disable_sync(sc, 1);
+
+/* clean out queued objects */
+		bnx2x_squeeze_objects(sc);
+	}
+
+bnx2x_nic_load_error2:
+
+	if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+		bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+		bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
+	}
+
+	sc->port.pmf = 0;
+
+bnx2x_nic_load_error1:
+
+	/* clear pf_load status, as it was already set */
+	if (IS_PF(sc)) {
+		bnx2x_clear_pf_load(sc);
+	}
+
+bnx2x_nic_load_error0:
+
+	bnx2x_free_fw_stats_mem(sc);
+	bnx2x_free_hsi_mem(sc);
+	bnx2x_free_mem(sc);
+
+	return rc;
+}
+
+/*
+* Handles controller initialization.
+*/
+int bnx2x_init(struct bnx2x_softc *sc)
+{
+	int other_engine = SC_PATH(sc) ? 0 : 1;
+	uint8_t other_load_status, load_status;
+	uint8_t global = FALSE;
+	int rc;
+
+	/* Check if the driver is still running and bail out if it is. */
+	if (sc->state != BNX2X_STATE_CLOSED) {
+		PMD_DRV_LOG(DEBUG, sc, "Init called while driver is running!");
+		rc = 0;
+		goto bnx2x_init_done;
+	}
+
+	bnx2x_set_power_state(sc, PCI_PM_D0);
+
+	/*
+	 * If parity occurred during the unload, then attentions and/or
+	 * RECOVERY_IN_PROGRESS may still be set. If so we want the first function
+	 * loaded on the current engine to complete the recovery. Parity recovery
+	 * is only relevant for PF driver.
+	 */
+	if (IS_PF(sc)) {
+		other_load_status = bnx2x_get_load_status(sc, other_engine);
+		load_status = bnx2x_get_load_status(sc, SC_PATH(sc));
+
+		if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
+		    bnx2x_chk_parity_attn(sc, &global, TRUE)) {
+			do {
+				/*
+				 * If there are attentions and they are in global blocks, set
+				 * the GLOBAL_RESET bit regardless whether it will be this
+				 * function that will complete the recovery or not.
+				 */
+				if (global) {
+					bnx2x_set_reset_global(sc);
+				}
+
+				/*
+				 * Only the first function on the current engine should try
+				 * to recover in open. In case of attentions in global blocks
+				 * only the first in the chip should try to recover.
+				 */
+				if ((!load_status
+				     && (!global ||!other_load_status))
+				    && bnx2x_trylock_leader_lock(sc)
+				    && !bnx2x_leader_reset(sc)) {
+					PMD_DRV_LOG(INFO, sc,
+						    "Recovered during init");
+					break;
+				}
+
+				/* recovery has failed... */
+				bnx2x_set_power_state(sc, PCI_PM_D3hot);
+
+				sc->recovery_state = BNX2X_RECOVERY_FAILED;
+
+				PMD_DRV_LOG(NOTICE, sc,
+					    "Recovery flow hasn't properly "
+					    "completed yet, try again later. "
+					    "If you still see this message after a "
+					    "few retries then power cycle is required.");
+
+				rc = -ENXIO;
+				goto bnx2x_init_done;
+			} while (0);
+		}
+	}
+
+	sc->recovery_state = BNX2X_RECOVERY_DONE;
+
+	rc = bnx2x_nic_load(sc);
+
+bnx2x_init_done:
+
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Initialization failed, "
+			    "stack notified driver is NOT running!");
+	}
+
+	return rc;
+}
+
+static void bnx2x_get_function_num(struct bnx2x_softc *sc)
+{
+	uint32_t val = 0;
+
+	/*
+	 * Read the ME register to get the function number. The ME register
+	 * holds the relative-function number and absolute-function number. The
+	 * absolute-function number appears only in E2 and above. Before that
+	 * these bits always contained zero, therefore we cannot blindly use them.
+	 */
+
+	val = REG_RD(sc, BAR_ME_REGISTER);
+
+	sc->pfunc_rel =
+	    (uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
+	sc->path_id =
+	    (uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
+	    1;
+
+	if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
+		sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
+	} else {
+		sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
+	}
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "Relative function %d, Absolute function %d, Path %d",
+		    sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
+}
+
+static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
+{
+	uint32_t shmem2_size;
+	uint32_t offset;
+	uint32_t mf_cfg_offset_value;
+
+	/* Non 57712 */
+	offset = (SHMEM_ADDR(sc, func_mb) +
+		  (MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
+
+	/* 57712 plus */
+	if (sc->devinfo.shmem2_base != 0) {
+		shmem2_size = SHMEM2_RD(sc, size);
+		if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
+			mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
+			if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
+				offset = mf_cfg_offset_value;
+			}
+		}
+	}
+
+	return offset;
+}
+
+static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
+{
+	uint32_t ret;
+	struct bnx2x_pci_cap *caps;
+
+	/* ensure PCIe capability is enabled */
+	caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
+	if (NULL != caps) {
+		PMD_DRV_LOG(DEBUG, sc, "Found PCIe capability: "
+			    "id=0x%04X type=0x%04X addr=0x%08X",
+			    caps->id, caps->type, caps->addr);
+		pci_read(sc, (caps->addr + reg), &ret, 2);
+		return ret;
+	}
+
+	PMD_DRV_LOG(WARNING, sc, "PCIe capability NOT FOUND!!!");
+
+	return 0;
+}
+
+static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
+{
+	return bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
+		PCIM_EXP_STA_TRANSACTION_PND;
+}
+
+/*
+* Walk the PCI capabiites list for the device to find what features are
+* supported. These capabilites may be enabled/disabled by firmware so it's
+* best to walk the list rather than make assumptions.
+*/
+static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
+{
+	PMD_INIT_FUNC_TRACE(sc);
+
+	struct bnx2x_pci_cap *caps;
+	uint16_t link_status;
+	int reg = 0;
+
+	/* check if PCI Power Management is enabled */
+	caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
+	if (NULL != caps) {
+		PMD_DRV_LOG(DEBUG, sc, "Found PM capability: "
+			    "id=0x%04X type=0x%04X addr=0x%08X",
+			    caps->id, caps->type, caps->addr);
+
+		sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
+		sc->devinfo.pcie_pm_cap_reg = caps->addr;
+	}
+
+	link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);
+
+	sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
+	sc->devinfo.pcie_link_width =
+	    ((link_status & PCIM_LINK_STA_WIDTH) >> 4);
+
+	PMD_DRV_LOG(DEBUG, sc, "PCIe link speed=%d width=%d",
+		    sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
+
+	sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;
+
+	/* check if MSI capability is enabled */
+	caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
+	if (NULL != caps) {
+		PMD_DRV_LOG(DEBUG, sc, "Found MSI capability at 0x%04x", reg);
+
+		sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
+		sc->devinfo.pcie_msi_cap_reg = caps->addr;
+	}
+
+	/* check if MSI-X capability is enabled */
+	caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
+	if (NULL != caps) {
+		PMD_DRV_LOG(DEBUG, sc, "Found MSI-X capability at 0x%04x", reg);
+
+		sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
+		sc->devinfo.pcie_msix_cap_reg = caps->addr;
+	}
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
+{
+	struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+	uint32_t val;
+
+	/* get the outer vlan if we're in switch-dependent mode */
+
+	val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+	mf_info->ext_id = (uint16_t) val;
+
+	mf_info->multi_vnics_mode = 1;
+
+	if (!VALID_OVLAN(mf_info->ext_id)) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid VLAN (%d)", mf_info->ext_id);
+		return 1;
+	}
+
+	/* get the capabilities */
+	if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
+	    FUNC_MF_CFG_PROTOCOL_ISCSI) {
+		mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
+	} else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
+		   == FUNC_MF_CFG_PROTOCOL_FCOE) {
+		mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
+	} else {
+		mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
+	}
+
+	mf_info->vnics_per_port =
+	    (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+	return 0;
+}
+
+static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
+{
+	uint32_t retval = 0;
+	uint32_t val;
+
+	val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
+
+	if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
+		if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
+			retval |= MF_PROTO_SUPPORT_ETHERNET;
+		}
+		if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
+			retval |= MF_PROTO_SUPPORT_ISCSI;
+		}
+		if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
+			retval |= MF_PROTO_SUPPORT_FCOE;
+		}
+	}
+
+	return retval;
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
+{
+	struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+	uint32_t val;
+
+	/*
+	 * There is no outer vlan if we're in switch-independent mode.
+	 * If the mac is valid then assume multi-function.
+	 */
+
+	val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
+
+	mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
+
+	mf_info->mf_protos_supported =
+	    bnx2x_get_shmem_ext_proto_support_flags(sc);
+
+	mf_info->vnics_per_port =
+	    (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+	return 0;
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
+{
+	struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+	uint32_t e1hov_tag;
+	uint32_t func_config;
+	uint32_t niv_config;
+
+	mf_info->multi_vnics_mode = 1;
+
+	e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+	func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
+	niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
+
+	mf_info->ext_id =
+	    (uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
+			FUNC_MF_CFG_E1HOV_TAG_SHIFT);
+
+	mf_info->default_vlan =
+	    (uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
+			FUNC_MF_CFG_AFEX_VLAN_SHIFT);
+
+	mf_info->niv_allowed_priorities =
+	    (uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
+		       FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
+
+	mf_info->niv_default_cos =
+	    (uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
+		       FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
+
+	mf_info->afex_vlan_mode =
+	    ((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
+	     FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
+
+	mf_info->niv_mba_enabled =
+	    ((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
+	     FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
+
+	mf_info->mf_protos_supported =
+	    bnx2x_get_shmem_ext_proto_support_flags(sc);
+
+	mf_info->vnics_per_port =
+	    (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+	return 0;
+}
+
+static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
+{
+	struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+	uint32_t mf_cfg1;
+	uint32_t mf_cfg2;
+	uint32_t ovlan1;
+	uint32_t ovlan2;
+	uint8_t i, j;
+
+	/* various MF mode sanity checks... */
+
+	if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Enumerated function %d is marked as hidden",
+			    SC_PORT(sc));
+		return 1;
+	}
+
+	if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
+		PMD_DRV_LOG(NOTICE, sc, "vnics_per_port=%d multi_vnics_mode=%d",
+			    mf_info->vnics_per_port, mf_info->multi_vnics_mode);
+		return 1;
+	}
+
+	if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
+/* vnic id > 0 must have valid ovlan in switch-dependent mode */
+		if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
+			PMD_DRV_LOG(NOTICE, sc, "mf_mode=SD vnic_id=%d ovlan=%d",
+				    SC_VN(sc), OVLAN(sc));
+			return 1;
+		}
+
+		if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "mf_mode=SD multi_vnics_mode=%d ovlan=%d",
+				    mf_info->multi_vnics_mode, OVLAN(sc));
+			return 1;
+		}
+
+/*
+ * Verify all functions are either MF or SF mode. If MF, make sure
+ * sure that all non-hidden functions have a valid ovlan. If SF,
+ * make sure that all non-hidden functions have an invalid ovlan.
+ */
+		FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+			mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
+			ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
+			if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
+			    (((mf_info->multi_vnics_mode)
+			      && !VALID_OVLAN(ovlan1))
+			     || ((!mf_info->multi_vnics_mode)
+				 && VALID_OVLAN(ovlan1)))) {
+				PMD_DRV_LOG(NOTICE, sc,
+					    "mf_mode=SD function %d MF config "
+					    "mismatch, multi_vnics_mode=%d ovlan=%d",
+					    i, mf_info->multi_vnics_mode,
+					    ovlan1);
+				return 1;
+			}
+		}
+
+/* Verify all funcs on the same port each have a different ovlan. */
+		FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+			mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
+			ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
+			/* iterate from the next function on the port to the max func */
+			for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
+				mf_cfg2 =
+				    MFCFG_RD(sc, func_mf_config[j].config);
+				ovlan2 =
+				    MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
+				if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
+				    && VALID_OVLAN(ovlan1)
+				    && !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
+				    && VALID_OVLAN(ovlan2)
+				    && (ovlan1 == ovlan2)) {
+					PMD_DRV_LOG(NOTICE, sc,
+						    "mf_mode=SD functions %d and %d "
+						    "have the same ovlan (%d)",
+						    i, j, ovlan1);
+					return 1;
+				}
+			}
+		}
+	}
+	/* MULTI_FUNCTION_SD */
+	return 0;
+}
+
+static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
+{
+	struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+	uint32_t val, mac_upper;
+	uint8_t i, vnic;
+
+	/* initialize mf_info defaults */
+	mf_info->vnics_per_port = 1;
+	mf_info->multi_vnics_mode = FALSE;
+	mf_info->path_has_ovlan = FALSE;
+	mf_info->mf_mode = SINGLE_FUNCTION;
+
+	if (!CHIP_IS_MF_CAP(sc)) {
+		return 0;
+	}
+
+	if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid mf_cfg_base!");
+		return 1;
+	}
+
+	/* get the MF mode (switch dependent / independent / single-function) */
+
+	val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
+
+	switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
+	case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
+
+		mac_upper =
+		    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+
+		/* check for legal upper mac bytes */
+		if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
+			mf_info->mf_mode = MULTI_FUNCTION_SI;
+		} else {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "Invalid config for Switch Independent mode");
+		}
+
+		break;
+
+	case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
+	case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
+
+		/* get outer vlan configuration */
+		val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+
+		if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
+		    FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+			mf_info->mf_mode = MULTI_FUNCTION_SD;
+		} else {
+			PMD_DRV_LOG(NOTICE, sc,
+				    "Invalid config for Switch Dependent mode");
+		}
+
+		break;
+
+	case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
+
+		/* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
+		return 0;
+
+	case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
+
+		/*
+		 * Mark MF mode as NIV if MCP version includes NPAR-SD support
+		 * and the MAC address is valid.
+		 */
+		mac_upper =
+		    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+
+		if ((SHMEM2_HAS(sc, afex_driver_support)) &&
+		    (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
+			mf_info->mf_mode = MULTI_FUNCTION_AFEX;
+		} else {
+			PMD_DRV_LOG(NOTICE, sc, "Invalid config for AFEX mode");
+		}
+
+		break;
+
+	default:
+
+		PMD_DRV_LOG(NOTICE, sc, "Unknown MF mode (0x%08x)",
+			    (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
+
+		return 1;
+	}
+
+	/* set path mf_mode (which could be different than function mf_mode) */
+	if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
+		mf_info->path_has_ovlan = TRUE;
+	} else if (mf_info->mf_mode == SINGLE_FUNCTION) {
+/*
+ * Decide on path multi vnics mode. If we're not in MF mode and in
+ * 4-port mode, this is good enough to check vnic-0 of the other port
+ * on the same path
+ */
+		if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
+			uint8_t other_port = !(PORT_ID(sc) & 1);
+			uint8_t abs_func_other_port =
+			    (SC_PATH(sc) + (2 * other_port));
+
+			val =
+			    MFCFG_RD(sc,
+				     func_mf_config
+				     [abs_func_other_port].e1hov_tag);
+
+			mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
+		}
+	}
+
+	if (mf_info->mf_mode == SINGLE_FUNCTION) {
+/* invalid MF config */
+		if (SC_VN(sc) >= 1) {
+			PMD_DRV_LOG(NOTICE, sc, "VNIC ID >= 1 in SF mode");
+			return 1;
+		}
+
+		return 0;
+	}
+
+	/* get the MF configuration */
+	mf_info->mf_config[SC_VN(sc)] =
+	    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
+
+	switch (mf_info->mf_mode) {
+	case MULTI_FUNCTION_SD:
+
+		bnx2x_get_shmem_mf_cfg_info_sd(sc);
+		break;
+
+	case MULTI_FUNCTION_SI:
+
+		bnx2x_get_shmem_mf_cfg_info_si(sc);
+		break;
+
+	case MULTI_FUNCTION_AFEX:
+
+		bnx2x_get_shmem_mf_cfg_info_niv(sc);
+		break;
+
+	default:
+
+		PMD_DRV_LOG(NOTICE, sc, "Get MF config failed (mf_mode=0x%08x)",
+			    mf_info->mf_mode);
+		return 1;
+	}
+
+	/* get the congestion management parameters */
+
+	vnic = 0;
+	FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+/* get min/max bw */
+		val = MFCFG_RD(sc, func_mf_config[i].config);
+		mf_info->min_bw[vnic] =
+		    ((val & FUNC_MF_CFG_MIN_BW_MASK) >>
+		     FUNC_MF_CFG_MIN_BW_SHIFT);
+		mf_info->max_bw[vnic] =
+		    ((val & FUNC_MF_CFG_MAX_BW_MASK) >>
+		     FUNC_MF_CFG_MAX_BW_SHIFT);
+		vnic++;
+	}
+
+	return bnx2x_check_valid_mf_cfg(sc);
+}
+
+static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
+{
+	int port;
+	uint32_t mac_hi, mac_lo, val;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	port = SC_PORT(sc);
+	mac_hi = mac_lo = 0;
+
+	sc->link_params.sc = sc;
+	sc->link_params.port = port;
+
+	/* get the hardware config info */
+	sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
+	sc->devinfo.hw_config2 =
+	    SHMEM_RD(sc, dev_info.shared_hw_config.config2);
+
+	sc->link_params.hw_led_mode =
+	    ((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
+	     SHARED_HW_CFG_LED_MODE_SHIFT);
+
+	/* get the port feature config */
+	sc->port.config =
+	    SHMEM_RD(sc, dev_info.port_feature_config[port].config);
+
+	/* get the link params */
+	sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
+	    & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
+	sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
+	    & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
+
+	/* get the lane config */
+	sc->link_params.lane_config =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
+
+	/* get the link config */
+	val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
+	sc->port.link_config[ELINK_INT_PHY] = val;
+	sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
+	sc->port.link_config[ELINK_EXT_PHY1] =
+	    SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
+
+	/* get the override preemphasis flag and enable it or turn it off */
+	val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
+	if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
+		sc->link_params.feature_config_flags |=
+		    ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+	} else {
+		sc->link_params.feature_config_flags &=
+		    ~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+	}
+
+	val = sc->devinfo.bc_ver >> 8;
+	if (val < BNX2X_BC_VER) {
+		/* for now only warn later we might need to enforce this */
+		PMD_DRV_LOG(NOTICE, sc, "This driver needs bc_ver %X but found %X, please upgrade BC\n",
+			    BNX2X_BC_VER, val);
+	}
+	sc->link_params.feature_config_flags |=
+				(val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
+				ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY :
+				0;
+
+	sc->link_params.feature_config_flags |=
+		(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
+		ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
+	sc->link_params.feature_config_flags |=
+		(val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ?
+		ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0;
+	sc->link_params.feature_config_flags |=
+		(val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
+		ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
+
+	/* get the initial value of the link params */
+	sc->link_params.multi_phy_config =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
+
+	/* get external phy info */
+	sc->port.ext_phy_config =
+	    SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
+
+	/* get the multifunction configuration */
+	bnx2x_get_mf_cfg_info(sc);
+
+	/* get the mac address */
+	if (IS_MF(sc)) {
+		mac_hi =
+		    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+		mac_lo =
+		    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
+	} else {
+		mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
+		mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
+	}
+
+	if ((mac_lo == 0) && (mac_hi == 0)) {
+		*sc->mac_addr_str = 0;
+		PMD_DRV_LOG(NOTICE, sc, "No Ethernet address programmed!");
+	} else {
+		sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
+		sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
+		sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
+		sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
+		sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
+		sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
+		snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
+			 "%02x:%02x:%02x:%02x:%02x:%02x",
+			 sc->link_params.mac_addr[0],
+			 sc->link_params.mac_addr[1],
+			 sc->link_params.mac_addr[2],
+			 sc->link_params.mac_addr[3],
+			 sc->link_params.mac_addr[4],
+			 sc->link_params.mac_addr[5]);
+		PMD_DRV_LOG(DEBUG, sc,
+			    "Ethernet address: %s", sc->mac_addr_str);
+	}
+
+	return 0;
+}
+
+static void bnx2x_media_detect(struct bnx2x_softc *sc)
+{
+	uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
+	switch (sc->link_params.phy[phy_idx].media_type) {
+	case ELINK_ETH_PHY_SFPP_10G_FIBER:
+	case ELINK_ETH_PHY_SFP_1G_FIBER:
+	case ELINK_ETH_PHY_XFP_FIBER:
+	case ELINK_ETH_PHY_KR:
+	case ELINK_ETH_PHY_CX4:
+		PMD_DRV_LOG(INFO, sc, "Found 10GBase-CX4 media.");
+		sc->media = IFM_10G_CX4;
+		break;
+	case ELINK_ETH_PHY_DA_TWINAX:
+		PMD_DRV_LOG(INFO, sc, "Found 10Gb Twinax media.");
+		sc->media = IFM_10G_TWINAX;
+		break;
+	case ELINK_ETH_PHY_BASE_T:
+		PMD_DRV_LOG(INFO, sc, "Found 10GBase-T media.");
+		sc->media = IFM_10G_T;
+		break;
+	case ELINK_ETH_PHY_NOT_PRESENT:
+		PMD_DRV_LOG(INFO, sc, "Media not present.");
+		sc->media = 0;
+		break;
+	case ELINK_ETH_PHY_UNSPECIFIED:
+	default:
+		PMD_DRV_LOG(INFO, sc, "Unknown media!");
+		sc->media = 0;
+		break;
+	}
+}
+
+#define GET_FIELD(value, fname)                     \
+(((value) & (fname##_MASK)) >> (fname##_SHIFT))
+#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
+#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
+
+static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
+{
+	int pfid = SC_FUNC(sc);
+	int igu_sb_id;
+	uint32_t val;
+	uint8_t fid, igu_sb_cnt = 0;
+
+	sc->igu_base_sb = 0xff;
+
+	if (CHIP_INT_MODE_IS_BC(sc)) {
+		int vn = SC_VN(sc);
+		igu_sb_cnt = sc->igu_sb_cnt;
+		sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
+				   FP_SB_MAX_E1x);
+		sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
+				  (CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
+		return 0;
+	}
+
+	/* IGU in normal mode - read CAM */
+	for (igu_sb_id = 0;
+	     igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
+		val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
+		if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
+			continue;
+		}
+		fid = IGU_FID(val);
+		if (fid & IGU_FID_ENCODE_IS_PF) {
+			if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
+				continue;
+			}
+			if (IGU_VEC(val) == 0) {
+				/* default status block */
+				sc->igu_dsb_id = igu_sb_id;
+			} else {
+				if (sc->igu_base_sb == 0xff) {
+					sc->igu_base_sb = igu_sb_id;
+				}
+				igu_sb_cnt++;
+			}
+		}
+	}
+
+	/*
+	 * Due to new PF resource allocation by MFW T7.4 and above, it's optional
+	 * that number of CAM entries will not be equal to the value advertised in
+	 * PCI. Driver should use the minimal value of both as the actual status
+	 * block count
+	 */
+	sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
+
+	if (igu_sb_cnt == 0) {
+		PMD_DRV_LOG(ERR, sc, "CAM configuration error");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+* Gather various information from the device config space, the device itself,
+* shmem, and the user input.
+*/
+static int bnx2x_get_device_info(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+	int rc;
+
+	/* get the chip revision (chip metal comes from pci config space) */
+	sc->devinfo.chip_id = sc->link_params.chip_id =
+	    (((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
+	     ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
+	     (((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
+	     ((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
+
+	/* force 57811 according to MISC register */
+	if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
+		if (CHIP_IS_57810(sc)) {
+			sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
+					       (sc->
+						devinfo.chip_id & 0x0000ffff));
+		} else if (CHIP_IS_57810_MF(sc)) {
+			sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
+					       (sc->
+						devinfo.chip_id & 0x0000ffff));
+		}
+		sc->devinfo.chip_id |= 0x1;
+	}
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
+		    sc->devinfo.chip_id,
+		    ((sc->devinfo.chip_id >> 16) & 0xffff),
+		    ((sc->devinfo.chip_id >> 12) & 0xf),
+		    ((sc->devinfo.chip_id >> 4) & 0xff),
+		    ((sc->devinfo.chip_id >> 0) & 0xf));
+
+	val = (REG_RD(sc, 0x2874) & 0x55);
+	if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
+		sc->flags |= BNX2X_ONE_PORT_FLAG;
+		PMD_DRV_LOG(DEBUG, sc, "single port device");
+	}
+
+	/* set the doorbell size */
+	sc->doorbell_size = (1 << BNX2X_DB_SHIFT);
+
+	/* determine whether the device is in 2 port or 4 port mode */
+	sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE;	/* E1h */
+	if (CHIP_IS_E2E3(sc)) {
+/*
+ * Read port4mode_en_ovwr[0]:
+ *   If 1, four port mode is in port4mode_en_ovwr[1].
+ *   If 0, four port mode is in port4mode_en[0].
+ */
+		val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
+		if (val & 1) {
+			val = ((val >> 1) & 1);
+		} else {
+			val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
+		}
+
+		sc->devinfo.chip_port_mode =
+		    (val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
+
+		PMD_DRV_LOG(DEBUG, sc, "Port mode = %s", (val) ? "4" : "2");
+	}
+
+	/* get the function and path info for the device */
+	bnx2x_get_function_num(sc);
+
+	/* get the shared memory base address */
+	sc->devinfo.shmem_base =
+	    sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+	sc->devinfo.shmem2_base =
+	    REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
+			MISC_REG_GENERIC_CR_0));
+
+	if (!sc->devinfo.shmem_base) {
+/* this should ONLY prevent upcoming shmem reads */
+		PMD_DRV_LOG(INFO, sc, "MCP not active");
+		sc->flags |= BNX2X_NO_MCP_FLAG;
+		return 0;
+	}
+
+	/* make sure the shared memory contents are valid */
+	val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
+	if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
+	    (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
+		PMD_DRV_LOG(NOTICE, sc, "Invalid SHMEM validity signature: 0x%08x",
+			    val);
+		return 0;
+	}
+
+	/* get the bootcode version */
+	sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
+	snprintf(sc->devinfo.bc_ver_str,
+		 sizeof(sc->devinfo.bc_ver_str),
+		 "%d.%d.%d",
+		 ((sc->devinfo.bc_ver >> 24) & 0xff),
+		 ((sc->devinfo.bc_ver >> 16) & 0xff),
+		 ((sc->devinfo.bc_ver >> 8) & 0xff));
+	PMD_DRV_LOG(DEBUG, sc, "Bootcode version: %s", sc->devinfo.bc_ver_str);
+
+	/* get the bootcode shmem address */
+	sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);
+
+	/* clean indirect addresses as they're not used */
+	pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
+	if (IS_PF(sc)) {
+		REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
+		REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
+		REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
+		REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
+		if (CHIP_IS_E1x(sc)) {
+			REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
+			REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
+			REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
+			REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
+		}
+	}
+
+	/* get the nvram size */
+	val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
+	sc->devinfo.flash_size =
+	    (NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
+
+	bnx2x_set_power_state(sc, PCI_PM_D0);
+	/* get various configuration parameters from shmem */
+	bnx2x_get_shmem_info(sc);
+
+	/* initialize IGU parameters */
+	if (CHIP_IS_E1x(sc)) {
+		sc->devinfo.int_block = INT_BLOCK_HC;
+		sc->igu_dsb_id = DEF_SB_IGU_ID;
+		sc->igu_base_sb = 0;
+	} else {
+		sc->devinfo.int_block = INT_BLOCK_IGU;
+
+/* do not allow device reset during IGU info preocessing */
+		bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+		val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
+
+		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+			int tout = 5000;
+
+			val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
+			REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
+			REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
+
+			while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
+				tout--;
+				DELAY(1000);
+			}
+
+			if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
+				PMD_DRV_LOG(NOTICE, sc,
+					    "FORCING IGU Normal Mode failed!!!");
+				bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+				return -1;
+			}
+		}
+
+		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+			PMD_DRV_LOG(DEBUG, sc, "IGU Backward Compatible Mode");
+			sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
+		} else {
+			PMD_DRV_LOG(DEBUG, sc, "IGU Normal Mode");
+		}
+
+		rc = bnx2x_get_igu_cam_info(sc);
+
+		bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+		if (rc) {
+			return rc;
+		}
+	}
+
+	/*
+	 * Get base FW non-default (fast path) status block ID. This value is
+	 * used to initialize the fw_sb_id saved on the fp/queue structure to
+	 * determine the id used by the FW.
+	 */
+	if (CHIP_IS_E1x(sc)) {
+		sc->base_fw_ndsb =
+		    ((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
+	} else {
+/*
+ * 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
+ * the same queue are indicated on the same IGU SB). So we prefer
+ * FW and IGU SBs to be the same value.
+ */
+		sc->base_fw_ndsb = sc->igu_base_sb;
+	}
+
+	elink_phy_probe(&sc->link_params);
+
+	return 0;
+}
+
+static void
+bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
+{
+	uint32_t cfg_size = 0;
+	uint32_t idx;
+	uint8_t port = SC_PORT(sc);
+
+	/* aggregation of supported attributes of all external phys */
+	sc->port.supported[0] = 0;
+	sc->port.supported[1] = 0;
+
+	switch (sc->link_params.num_phys) {
+	case 1:
+		sc->port.supported[0] =
+		    sc->link_params.phy[ELINK_INT_PHY].supported;
+		cfg_size = 1;
+		break;
+	case 2:
+		sc->port.supported[0] =
+		    sc->link_params.phy[ELINK_EXT_PHY1].supported;
+		cfg_size = 1;
+		break;
+	case 3:
+		if (sc->link_params.multi_phy_config &
+		    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+			sc->port.supported[1] =
+			    sc->link_params.phy[ELINK_EXT_PHY1].supported;
+			sc->port.supported[0] =
+			    sc->link_params.phy[ELINK_EXT_PHY2].supported;
+		} else {
+			sc->port.supported[0] =
+			    sc->link_params.phy[ELINK_EXT_PHY1].supported;
+			sc->port.supported[1] =
+			    sc->link_params.phy[ELINK_EXT_PHY2].supported;
+		}
+		cfg_size = 2;
+		break;
+	}
+
+	if (!(sc->port.supported[0] || sc->port.supported[1])) {
+		PMD_DRV_LOG(ERR, sc,
+			    "Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
+			    SHMEM_RD(sc,
+				     dev_info.port_hw_config
+				     [port].external_phy_config),
+			    SHMEM_RD(sc,
+				     dev_info.port_hw_config
+				     [port].external_phy_config2));
+		return;
+	}
+
+	if (CHIP_IS_E3(sc))
+		sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
+	else {
+		switch (switch_cfg) {
+		case ELINK_SWITCH_CFG_1G:
+			sc->port.phy_addr =
+			    REG_RD(sc,
+				   NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
+			break;
+		case ELINK_SWITCH_CFG_10G:
+			sc->port.phy_addr =
+			    REG_RD(sc,
+				   NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
+			break;
+		default:
+			PMD_DRV_LOG(ERR, sc,
+				    "Invalid switch config in"
+				    "link_config=0x%08x",
+				    sc->port.link_config[0]);
+			return;
+		}
+	}
+
+	PMD_DRV_LOG(INFO, sc, "PHY addr 0x%08x", sc->port.phy_addr);
+
+	/* mask what we support according to speed_cap_mask per configuration */
+	for (idx = 0; idx < cfg_size; idx++) {
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_10baseT_Half;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_10baseT_Full;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_100baseT_Half;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_100baseT_Full;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_1000baseT_Full;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_2500baseX_Full;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_10000baseT_Full;
+		}
+
+		if (!(sc->link_params.speed_cap_mask[idx] &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
+			sc->port.supported[idx] &=
+			    ~ELINK_SUPPORTED_20000baseKR2_Full;
+		}
+	}
+
+	PMD_DRV_LOG(INFO, sc, "PHY supported 0=0x%08x 1=0x%08x",
+		    sc->port.supported[0], sc->port.supported[1]);
+}
+
+static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
+{
+	uint32_t link_config;
+	uint32_t idx;
+	uint32_t cfg_size = 0;
+
+	sc->port.advertising[0] = 0;
+	sc->port.advertising[1] = 0;
+
+	switch (sc->link_params.num_phys) {
+	case 1:
+	case 2:
+		cfg_size = 1;
+		break;
+	case 3:
+		cfg_size = 2;
+		break;
+	}
+
+	for (idx = 0; idx < cfg_size; idx++) {
+		sc->link_params.req_duplex[idx] = DUPLEX_FULL;
+		link_config = sc->port.link_config[idx];
+
+		switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
+		case PORT_FEATURE_LINK_SPEED_AUTO:
+			if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_AUTO_NEG;
+				sc->port.advertising[idx] |=
+				    sc->port.supported[idx];
+				if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
+				    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
+					sc->port.advertising[idx] |=
+					    (ELINK_SUPPORTED_100baseT_Half |
+					     ELINK_SUPPORTED_100baseT_Full);
+			} else {
+				/* force 10G, no AN */
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_10000;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_10000baseT_Full |
+				     ADVERTISED_FIBRE);
+				continue;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10M_FULL:
+			if (sc->
+			    port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
+			{
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_10;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_10baseT_Full | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10M_HALF:
+			if (sc->
+			    port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
+			{
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_10;
+				sc->link_params.req_duplex[idx] = DUPLEX_HALF;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_10baseT_Half | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_100M_FULL:
+			if (sc->
+			    port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
+			{
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_100;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_100baseT_Full | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_100M_HALF:
+			if (sc->
+			    port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
+			{
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_100;
+				sc->link_params.req_duplex[idx] = DUPLEX_HALF;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_100baseT_Half | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_1G:
+			if (sc->port.supported[idx] &
+			    ELINK_SUPPORTED_1000baseT_Full) {
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_1000;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_1000baseT_Full | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_2_5G:
+			if (sc->port.supported[idx] &
+			    ELINK_SUPPORTED_2500baseX_Full) {
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_2500;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_2500baseX_Full | ADVERTISED_TP);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10G_CX4:
+			if (sc->port.supported[idx] &
+			    ELINK_SUPPORTED_10000baseT_Full) {
+				sc->link_params.req_line_speed[idx] =
+				    ELINK_SPEED_10000;
+				sc->port.advertising[idx] |=
+				    (ADVERTISED_10000baseT_Full |
+				     ADVERTISED_FIBRE);
+			} else {
+				PMD_DRV_LOG(ERR, sc,
+					    "Invalid NVRAM config link_config=0x%08x "
+					    "speed_cap_mask=0x%08x",
+					    link_config,
+					    sc->
+					    link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_20G:
+			sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
+			break;
+
+		default:
+			PMD_DRV_LOG(ERR, sc,
+				    "Invalid NVRAM config link_config=0x%08x "
+				    "speed_cap_mask=0x%08x", link_config,
+				    sc->link_params.speed_cap_mask[idx]);
+			sc->link_params.req_line_speed[idx] =
+			    ELINK_SPEED_AUTO_NEG;
+			sc->port.advertising[idx] = sc->port.supported[idx];
+			break;
+		}
+
+		sc->link_params.req_flow_ctrl[idx] =
+		    (link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
+
+		if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
+			if (!
+			    (sc->
+			     port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
+				sc->link_params.req_flow_ctrl[idx] =
+				    ELINK_FLOW_CTRL_NONE;
+			} else {
+				bnx2x_set_requested_fc(sc);
+			}
+		}
+	}
+}
+
+static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
+{
+	uint8_t port = SC_PORT(sc);
+	uint32_t eee_mode;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	/* shmem data already read in bnx2x_get_shmem_info() */
+
+	bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
+	bnx2x_link_settings_requested(sc);
+
+	/* configure link feature according to nvram value */
+	eee_mode =
+	    (((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
+	      & PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
+	     PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
+	if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
+		sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
+					    ELINK_EEE_MODE_ENABLE_LPI |
+					    ELINK_EEE_MODE_OUTPUT_TIME);
+	} else {
+		sc->link_params.eee_mode = 0;
+	}
+
+	/* get the media type */
+	bnx2x_media_detect(sc);
+}
+
+static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
+{
+	uint32_t flags = MODE_ASIC | MODE_PORT2;
+
+	if (CHIP_IS_E2(sc)) {
+		flags |= MODE_E2;
+	} else if (CHIP_IS_E3(sc)) {
+		flags |= MODE_E3;
+		if (CHIP_REV(sc) == CHIP_REV_Ax) {
+			flags |= MODE_E3_A0;
+		} else {	/*if (CHIP_REV(sc) == CHIP_REV_Bx) */
+
+			flags |= MODE_E3_B0 | MODE_COS3;
+		}
+	}
+
+	if (IS_MF(sc)) {
+		flags |= MODE_MF;
+		switch (sc->devinfo.mf_info.mf_mode) {
+		case MULTI_FUNCTION_SD:
+			flags |= MODE_MF_SD;
+			break;
+		case MULTI_FUNCTION_SI:
+			flags |= MODE_MF_SI;
+			break;
+		case MULTI_FUNCTION_AFEX:
+			flags |= MODE_MF_AFEX;
+			break;
+		}
+	} else {
+		flags |= MODE_SF;
+	}
+
+#if defined(__LITTLE_ENDIAN)
+	flags |= MODE_LITTLE_ENDIAN;
+#else /* __BIG_ENDIAN */
+	flags |= MODE_BIG_ENDIAN;
+#endif
+
+	INIT_MODE_FLAGS(sc) = flags;
+}
+
+int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	char buf[32];
+	uint32_t i;
+
+	if (IS_PF(sc)) {
+		/************************/
+		/* DEFAULT STATUS BLOCK */
+		/************************/
+
+		if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
+				  &sc->def_sb_dma, "def_sb",
+				  RTE_CACHE_LINE_SIZE) != 0) {
+			return -1;
+		}
+
+		sc->def_sb =
+		    (struct host_sp_status_block *)sc->def_sb_dma.vaddr;
+		/***************/
+		/* EVENT QUEUE */
+		/***************/
+
+		if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
+				  &sc->eq_dma, "ev_queue",
+				  RTE_CACHE_LINE_SIZE) != 0) {
+			sc->def_sb = NULL;
+			return -1;
+		}
+
+		sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;
+
+		/*************/
+		/* SLOW PATH */
+		/*************/
+
+		if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
+				  &sc->sp_dma, "sp",
+				  RTE_CACHE_LINE_SIZE) != 0) {
+			sc->eq = NULL;
+			sc->def_sb = NULL;
+			return -1;
+		}
+
+		sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;
+
+		/*******************/
+		/* SLOW PATH QUEUE */
+		/*******************/
+
+		if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
+				  &sc->spq_dma, "sp_queue",
+				  RTE_CACHE_LINE_SIZE) != 0) {
+			sc->sp = NULL;
+			sc->eq = NULL;
+			sc->def_sb = NULL;
+			return -1;
+		}
+
+		sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
+
+		/***************************/
+		/* FW DECOMPRESSION BUFFER */
+		/***************************/
+
+		if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
+				  "fw_buf", RTE_CACHE_LINE_SIZE) != 0) {
+			sc->spq = NULL;
+			sc->sp = NULL;
+			sc->eq = NULL;
+			sc->def_sb = NULL;
+			return -1;
+		}
+
+		sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
+	}
+
+	/*************/
+	/* FASTPATHS */
+	/*************/
+
+	/* allocate DMA memory for each fastpath structure */
+	for (i = 0; i < sc->num_queues; i++) {
+		fp = &sc->fp[i];
+		fp->sc = sc;
+		fp->index = i;
+
+		/*******************/
+		/* FP STATUS BLOCK */
+		/*******************/
+
+		snprintf(buf, sizeof(buf), "fp_%d_sb", i);
+		if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
+				  &fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
+			PMD_DRV_LOG(NOTICE, sc, "Failed to alloc %s", buf);
+			return -1;
+		} else {
+			if (CHIP_IS_E2E3(sc)) {
+				fp->status_block.e2_sb =
+				    (struct host_hc_status_block_e2 *)
+				    fp->sb_dma.vaddr;
+			} else {
+				fp->status_block.e1x_sb =
+				    (struct host_hc_status_block_e1x *)
+				    fp->sb_dma.vaddr;
+			}
+		}
+	}
+
+	return 0;
+}
+
+void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	int i;
+
+	for (i = 0; i < sc->num_queues; i++) {
+		fp = &sc->fp[i];
+
+		/*******************/
+		/* FP STATUS BLOCK */
+		/*******************/
+
+		memset(&fp->status_block, 0, sizeof(fp->status_block));
+		bnx2x_dma_free(&fp->sb_dma);
+	}
+
+	if (IS_PF(sc)) {
+		/***************************/
+		/* FW DECOMPRESSION BUFFER */
+		/***************************/
+
+		bnx2x_dma_free(&sc->gz_buf_dma);
+		sc->gz_buf = NULL;
+
+		/*******************/
+		/* SLOW PATH QUEUE */
+		/*******************/
+
+		bnx2x_dma_free(&sc->spq_dma);
+		sc->spq = NULL;
+
+		/*************/
+		/* SLOW PATH */
+		/*************/
+
+		bnx2x_dma_free(&sc->sp_dma);
+		sc->sp = NULL;
+
+		/***************/
+		/* EVENT QUEUE */
+		/***************/
+
+		bnx2x_dma_free(&sc->eq_dma);
+		sc->eq = NULL;
+
+		/************************/
+		/* DEFAULT STATUS BLOCK */
+		/************************/
+
+		bnx2x_dma_free(&sc->def_sb_dma);
+		sc->def_sb = NULL;
+	}
+}
+
+/*
+* Previous driver DMAE transaction may have occurred when pre-boot stage
+* ended and boot began. This would invalidate the addresses of the
+* transaction, resulting in was-error bit set in the PCI causing all
+* hw-to-host PCIe transactions to timeout. If this happened we want to clear
+* the interrupt which detected this from the pglueb and the was-done bit
+*/
+static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+
+	if (!CHIP_IS_E1x(sc)) {
+		val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
+			REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+			       1 << SC_FUNC(sc));
+		}
+	}
+}
+
+static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
+{
+	uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
+				     DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
+	if (!rc) {
+		PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
+{
+	struct bnx2x_prev_list_node *tmp;
+
+	LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
+		if ((sc->pcie_bus == tmp->bus) &&
+		    (sc->pcie_device == tmp->slot) &&
+		    (SC_PATH(sc) == tmp->path)) {
+			return tmp;
+		}
+	}
+
+	return NULL;
+}
+
+static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
+{
+	struct bnx2x_prev_list_node *tmp;
+	int rc = FALSE;
+
+	rte_spinlock_lock(&bnx2x_prev_mtx);
+
+	tmp = bnx2x_prev_path_get_entry(sc);
+	if (tmp) {
+		if (tmp->aer) {
+			PMD_DRV_LOG(DEBUG, sc,
+				    "Path %d/%d/%d was marked by AER",
+				    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+		} else {
+			rc = TRUE;
+			PMD_DRV_LOG(DEBUG, sc,
+				    "Path %d/%d/%d was already cleaned from previous drivers",
+				    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+		}
+	}
+
+	rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+	return rc;
+}
+
+static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
+{
+	struct bnx2x_prev_list_node *tmp;
+
+	rte_spinlock_lock(&bnx2x_prev_mtx);
+
+	/* Check whether the entry for this path already exists */
+	tmp = bnx2x_prev_path_get_entry(sc);
+	if (tmp) {
+		if (!tmp->aer) {
+			PMD_DRV_LOG(DEBUG, sc,
+				    "Re-marking AER in path %d/%d/%d",
+				    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+		} else {
+			PMD_DRV_LOG(DEBUG, sc,
+				    "Removing AER indication from path %d/%d/%d",
+				    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+			tmp->aer = 0;
+		}
+
+		rte_spinlock_unlock(&bnx2x_prev_mtx);
+		return 0;
+	}
+
+	rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+	/* Create an entry for this path and add it */
+	tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
+			 RTE_CACHE_LINE_SIZE);
+	if (!tmp) {
+		PMD_DRV_LOG(NOTICE, sc, "Failed to allocate 'bnx2x_prev_list_node'");
+		return -1;
+	}
+
+	tmp->bus = sc->pcie_bus;
+	tmp->slot = sc->pcie_device;
+	tmp->path = SC_PATH(sc);
+	tmp->aer = 0;
+	tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
+
+	rte_spinlock_lock(&bnx2x_prev_mtx);
+
+	LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);
+
+	rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+	return 0;
+}
+
+static int bnx2x_do_flr(struct bnx2x_softc *sc)
+{
+	int i;
+
+	/* only E2 and onwards support FLR */
+	if (CHIP_IS_E1x(sc)) {
+		PMD_DRV_LOG(WARNING, sc, "FLR not supported in E1H");
+		return -1;
+	}
+
+	/* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
+	if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
+		PMD_DRV_LOG(WARNING, sc,
+			    "FLR not supported by BC_VER: 0x%08x",
+			    sc->devinfo.bc_ver);
+		return -1;
+	}
+
+	/* Wait for Transaction Pending bit clean */
+	for (i = 0; i < 4; i++) {
+		if (i) {
+			DELAY(((1 << (i - 1)) * 100) * 1000);
+		}
+
+		if (!bnx2x_is_pcie_pending(sc)) {
+			goto clear;
+		}
+	}
+
+	PMD_DRV_LOG(NOTICE, sc, "PCIE transaction is not cleared, "
+		    "proceeding with reset anyway");
+
+clear:
+	bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
+
+	return 0;
+}
+
+struct bnx2x_mac_vals {
+	uint32_t xmac_addr;
+	uint32_t xmac_val;
+	uint32_t emac_addr;
+	uint32_t emac_val;
+	uint32_t umac_addr;
+	uint32_t umac_val;
+	uint32_t bmac_addr;
+	uint32_t bmac_val[2];
+};
+
+static void
+bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
+{
+	uint32_t val, base_addr, offset, mask, reset_reg;
+	uint8_t mac_stopped = FALSE;
+	uint8_t port = SC_PORT(sc);
+	uint32_t wb_data[2];
+
+	/* reset addresses as they also mark which values were changed */
+	vals->bmac_addr = 0;
+	vals->umac_addr = 0;
+	vals->xmac_addr = 0;
+	vals->emac_addr = 0;
+
+	reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
+
+	if (!CHIP_IS_E3(sc)) {
+		val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
+		mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
+		if ((mask & reset_reg) && val) {
+			base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
+			    : NIG_REG_INGRESS_BMAC0_MEM;
+			offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
+			    : BIGMAC_REGISTER_BMAC_CONTROL;
+
+			/*
+			 * use rd/wr since we cannot use dmae. This is safe
+			 * since MCP won't access the bus due to the request
+			 * to unload, and no function on the path can be
+			 * loaded at this time.
+			 */
+			wb_data[0] = REG_RD(sc, base_addr + offset);
+			wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
+			vals->bmac_addr = base_addr + offset;
+			vals->bmac_val[0] = wb_data[0];
+			vals->bmac_val[1] = wb_data[1];
+			wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
+			REG_WR(sc, vals->bmac_addr, wb_data[0]);
+			REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
+		}
+
+		vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
+		vals->emac_val = REG_RD(sc, vals->emac_addr);
+		REG_WR(sc, vals->emac_addr, 0);
+		mac_stopped = TRUE;
+	} else {
+		if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
+			base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+			val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
+			REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
+			       val & ~(1 << 1));
+			REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
+			       val | (1 << 1));
+			vals->xmac_addr = base_addr + XMAC_REG_CTRL;
+			vals->xmac_val = REG_RD(sc, vals->xmac_addr);
+			REG_WR(sc, vals->xmac_addr, 0);
+			mac_stopped = TRUE;
+		}
+
+		mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
+		if (mask & reset_reg) {
+			base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+			vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
+			vals->umac_val = REG_RD(sc, vals->umac_addr);
+			REG_WR(sc, vals->umac_addr, 0);
+			mac_stopped = TRUE;
+		}
+	}
+
+	if (mac_stopped) {
+		DELAY(20000);
+	}
+}
+
+#define BNX2X_PREV_UNDI_PROD_ADDR(p)  (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
+#define BNX2X_PREV_UNDI_RCQ(val)      ((val) & 0xffff)
+#define BNX2X_PREV_UNDI_BD(val)       ((val) >> 16 & 0xffff)
+#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
+
+static void
+bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
+{
+	uint16_t rcq, bd;
+	uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));
+
+	rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
+	bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
+
+	tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
+	REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
+}
+
+static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
+{
+	uint32_t reset_reg, tmp_reg = 0, rc;
+	uint8_t prev_undi = FALSE;
+	struct bnx2x_mac_vals mac_vals;
+	uint32_t timer_count = 1000;
+	uint32_t prev_brb;
+
+	/*
+	 * It is possible a previous function received 'common' answer,
+	 * but hasn't loaded yet, therefore creating a scenario of
+	 * multiple functions receiving 'common' on the same path.
+	 */
+	memset(&mac_vals, 0, sizeof(mac_vals));
+
+	if (bnx2x_prev_is_path_marked(sc)) {
+		return bnx2x_prev_mcp_done(sc);
+	}
+
+	reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
+
+	/* Reset should be performed after BRB is emptied */
+	if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
+		/* Close the MAC Rx to prevent BRB from filling up */
+		bnx2x_prev_unload_close_mac(sc, &mac_vals);
+
+		/* close LLH filters towards the BRB */
+		elink_set_rx_filter(&sc->link_params, 0);
+
+		/*
+		 * Check if the UNDI driver was previously loaded.
+		 * UNDI driver initializes CID offset for normal bell to 0x7
+		 */
+		if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
+			tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
+			if (tmp_reg == 0x7) {
+				PMD_DRV_LOG(DEBUG, sc, "UNDI previously loaded");
+				prev_undi = TRUE;
+				/* clear the UNDI indication */
+				REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
+				/* clear possible idle check errors */
+				REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
+			}
+		}
+
+		/* wait until BRB is empty */
+		tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
+		while (timer_count) {
+			prev_brb = tmp_reg;
+
+			tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
+			if (!tmp_reg) {
+				break;
+			}
+
+			PMD_DRV_LOG(DEBUG, sc, "BRB still has 0x%08x", tmp_reg);
+
+			/* reset timer as long as BRB actually gets emptied */
+			if (prev_brb > tmp_reg) {
+				timer_count = 1000;
+			} else {
+				timer_count--;
+			}
+
+			/* If UNDI resides in memory, manually increment it */
+			if (prev_undi) {
+				bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
+			}
+
+			DELAY(10);
+		}
+
+		if (!timer_count) {
+			PMD_DRV_LOG(NOTICE, sc, "Failed to empty BRB");
+		}
+	}
+
+	/* No packets are in the pipeline, path is ready for reset */
+	bnx2x_reset_common(sc);
+
+	if (mac_vals.xmac_addr) {
+		REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
+	}
+	if (mac_vals.umac_addr) {
+		REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
+	}
+	if (mac_vals.emac_addr) {
+		REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
+	}
+	if (mac_vals.bmac_addr) {
+		REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
+		REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
+	}
+
+	rc = bnx2x_prev_mark_path(sc, prev_undi);
+	if (rc) {
+		bnx2x_prev_mcp_done(sc);
+		return rc;
+	}
+
+	return bnx2x_prev_mcp_done(sc);
+}
+
+static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
+{
+	int rc;
+
+	/* Test if previous unload process was already finished for this path */
+	if (bnx2x_prev_is_path_marked(sc)) {
+		return bnx2x_prev_mcp_done(sc);
+	}
+
+	/*
+	 * If function has FLR capabilities, and existing FW version matches
+	 * the one required, then FLR will be sufficient to clean any residue
+	 * left by previous driver
+	 */
+	rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
+	if (!rc) {
+		/* fw version is good */
+		rc = bnx2x_do_flr(sc);
+	}
+
+	if (!rc) {
+		/* FLR was performed */
+		return 0;
+	}
+
+	PMD_DRV_LOG(INFO, sc, "Could not FLR");
+
+	/* Close the MCP request, return failure */
+	rc = bnx2x_prev_mcp_done(sc);
+	if (!rc) {
+		rc = BNX2X_PREV_WAIT_NEEDED;
+	}
+
+	return rc;
+}
+
+static int bnx2x_prev_unload(struct bnx2x_softc *sc)
+{
+	int time_counter = 10;
+	uint32_t fw, hw_lock_reg, hw_lock_val;
+	uint32_t rc = 0;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	/*
+	 * Clear HW from errors which may have resulted from an interrupted
+	 * DMAE transaction.
+	 */
+	bnx2x_prev_interrupted_dmae(sc);
+
+	/* Release previously held locks */
+	hw_lock_reg = (SC_FUNC(sc) <= 5) ?
+			(MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8) :
+			(MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
+
+	hw_lock_val = (REG_RD(sc, hw_lock_reg));
+	if (hw_lock_val) {
+		if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
+			PMD_DRV_LOG(DEBUG, sc, "Releasing previously held NVRAM lock\n");
+			REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
+			       (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
+		}
+		PMD_DRV_LOG(DEBUG, sc, "Releasing previously held HW lock\n");
+		REG_WR(sc, hw_lock_reg, 0xffffffff);
+	}
+
+	if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
+		PMD_DRV_LOG(DEBUG, sc, "Releasing previously held ALR\n");
+		REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
+	}
+
+	do {
+		/* Lock MCP using an unload request */
+		fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
+		if (!fw) {
+			PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
+			rc = -1;
+			break;
+		}
+
+		if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
+			rc = bnx2x_prev_unload_common(sc);
+			break;
+		}
+
+		/* non-common reply from MCP might require looping */
+		rc = bnx2x_prev_unload_uncommon(sc);
+		if (rc != BNX2X_PREV_WAIT_NEEDED) {
+			break;
+		}
+
+		DELAY(20000);
+	} while (--time_counter);
+
+	if (!time_counter || rc) {
+		PMD_DRV_LOG(NOTICE, sc, "Failed to unload previous driver!");
+		rc = -1;
+	}
+
+	return rc;
+}
+
+static void
+bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
+{
+	if (!CHIP_IS_E1x(sc)) {
+		sc->dcb_state = dcb_on;
+		sc->dcbx_enabled = dcbx_enabled;
+	} else {
+		sc->dcb_state = FALSE;
+		sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
+	}
+	PMD_DRV_LOG(DEBUG, sc,
+		    "DCB state [%s:%s]",
+		    dcb_on ? "ON" : "OFF",
+		    (dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
+		    (dcbx_enabled ==
+		     BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
+		    : (dcbx_enabled ==
+		       BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
+		    "on-chip with negotiation" : "invalid");
+}
+
+static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
+{
+	int cid_count = BNX2X_L2_MAX_CID(sc);
+
+	if (CNIC_SUPPORT(sc)) {
+		cid_count += CNIC_CID_MAX;
+	}
+
+	return roundup(cid_count, QM_CID_ROUND);
+}
+
+static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
+{
+	int pri, cos;
+
+	uint32_t pri_map = 0;
+
+	for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
+		cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
+		if (cos < sc->max_cos) {
+			sc->prio_to_cos[pri] = cos;
+		} else {
+			PMD_DRV_LOG(WARNING, sc,
+				    "Invalid COS %d for priority %d "
+				    "(max COS is %d), setting to 0", cos, pri,
+				    (sc->max_cos - 1));
+			sc->prio_to_cos[pri] = 0;
+		}
+	}
+}
+
+static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
+{
+	struct {
+		uint8_t id;
+		uint8_t next;
+	} pci_cap;
+	uint16_t status;
+	struct bnx2x_pci_cap *cap;
+
+	cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
+					 RTE_CACHE_LINE_SIZE);
+	if (!cap) {
+		PMD_DRV_LOG(NOTICE, sc, "Failed to allocate memory");
+		return -ENOMEM;
+	}
+
+#ifndef RTE_EXEC_ENV_FREEBSD
+	pci_read(sc, PCI_STATUS, &status, 2);
+	if (!(status & PCI_STATUS_CAP_LIST)) {
+#else
+	pci_read(sc, PCIR_STATUS, &status, 2);
+	if (!(status & PCIM_STATUS_CAPPRESENT)) {
+#endif
+		PMD_DRV_LOG(NOTICE, sc, "PCIe capability reading failed");
+		return -1;
+	}
+
+#ifndef RTE_EXEC_ENV_FREEBSD
+	pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
+#else
+	pci_read(sc, PCIR_CAP_PTR, &pci_cap.next, 1);
+#endif
+	while (pci_cap.next) {
+		cap->addr = pci_cap.next & ~3;
+		pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
+		if (pci_cap.id == 0xff)
+			break;
+		cap->id = pci_cap.id;
+		cap->type = BNX2X_PCI_CAP;
+		cap->next = rte_zmalloc("pci_cap",
+					sizeof(struct bnx2x_pci_cap),
+					RTE_CACHE_LINE_SIZE);
+		if (!cap->next) {
+			PMD_DRV_LOG(NOTICE, sc, "Failed to allocate memory");
+			return -ENOMEM;
+		}
+		cap = cap->next;
+	}
+
+	return 0;
+}
+
+static void bnx2x_init_rte(struct bnx2x_softc *sc)
+{
+	if (IS_VF(sc)) {
+		sc->max_tx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
+					sc->igu_sb_cnt);
+		sc->max_rx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
+					sc->igu_sb_cnt);
+	} else {
+		sc->max_rx_queues = BNX2X_MAX_RSS_COUNT(sc);
+		sc->max_tx_queues = sc->max_rx_queues;
+	}
+}
+
+#define FW_HEADER_LEN 104
+#define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.13.11.0.fw"
+#define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.13.11.0.fw"
+
+void bnx2x_load_firmware(struct bnx2x_softc *sc)
+{
+	const char *fwname;
+	int f;
+	struct stat st;
+
+	fwname = sc->devinfo.device_id == CHIP_NUM_57711
+		? FW_NAME_57711 : FW_NAME_57810;
+	f = open(fwname, O_RDONLY);
+	if (f < 0) {
+		PMD_DRV_LOG(NOTICE, sc, "Can't open firmware file");
+		return;
+	}
+
+	if (fstat(f, &st) < 0) {
+		PMD_DRV_LOG(NOTICE, sc, "Can't stat firmware file");
+		close(f);
+		return;
+	}
+
+	sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
+	if (!sc->firmware) {
+		PMD_DRV_LOG(NOTICE, sc, "Can't allocate memory for firmware");
+		close(f);
+		return;
+	}
+
+	if (read(f, sc->firmware, st.st_size) != st.st_size) {
+		PMD_DRV_LOG(NOTICE, sc, "Can't read firmware data");
+		close(f);
+		return;
+	}
+	close(f);
+
+	sc->fw_len = st.st_size;
+	if (sc->fw_len < FW_HEADER_LEN) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Invalid fw size: %" PRIu64, sc->fw_len);
+		return;
+	}
+	PMD_DRV_LOG(DEBUG, sc, "fw_len = %" PRIu64, sc->fw_len);
+}
+
+static void
+bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
+{
+	uint32_t *src = (uint32_t *) data;
+	uint32_t i, j, tmp;
+
+	for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
+		tmp = rte_be_to_cpu_32(src[j]);
+		dst[i].op = (tmp >> 24) & 0xFF;
+		dst[i].offset = tmp & 0xFFFFFF;
+		dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
+	}
+}
+
+static void
+bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
+{
+	uint16_t *src = (uint16_t *) data;
+	uint32_t i;
+
+	for (i = 0; i < len / 2; ++i)
+		dst[i] = rte_be_to_cpu_16(src[i]);
+}
+
+static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
+{
+	uint32_t *src = (uint32_t *) data;
+	uint32_t i;
+
+	for (i = 0; i < len / 4; ++i)
+		dst[i] = rte_be_to_cpu_32(src[i]);
+}
+
+static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
+{
+	uint32_t *src = (uint32_t *) data;
+	uint32_t i, j, tmp;
+
+	for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
+		dst[i].base = rte_be_to_cpu_32(src[j++]);
+		tmp = rte_be_to_cpu_32(src[j]);
+		dst[i].m1 = (tmp >> 16) & 0xFFFF;
+		dst[i].m2 = tmp & 0xFFFF;
+		++j;
+		tmp = rte_be_to_cpu_32(src[j]);
+		dst[i].m3 = (tmp >> 16) & 0xFFFF;
+		dst[i].size = tmp & 0xFFFF;
+	}
+}
+
+/*
+* Device attach function.
+*
+* Allocates device resources, performs secondary chip identification, and
+* initializes driver instance variables. This function is called from driver
+* load after a successful probe.
+*
+* Returns:
+*   0 = Success, >0 = Failure
+*/
+int bnx2x_attach(struct bnx2x_softc *sc)
+{
+	int rc;
+
+	PMD_DRV_LOG(DEBUG, sc, "Starting attach...");
+
+	rc = bnx2x_pci_get_caps(sc);
+	if (rc) {
+		PMD_DRV_LOG(NOTICE, sc, "PCIe caps reading was failed");
+		return rc;
+	}
+
+	sc->state = BNX2X_STATE_CLOSED;
+
+	pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);
+
+	sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
+
+	/* get PCI capabilites */
+	bnx2x_probe_pci_caps(sc);
+
+	if (sc->devinfo.pcie_msix_cap_reg != 0) {
+		uint32_t val;
+		pci_read(sc,
+			 (sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
+			 2);
+		sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
+	} else {
+		sc->igu_sb_cnt = 1;
+	}
+
+	/* Init RTE stuff */
+	bnx2x_init_rte(sc);
+
+	if (IS_PF(sc)) {
+		/* Enable internal target-read (in case we are probed after PF
+		 * FLR). Must be done prior to any BAR read access. Only for
+		 * 57712 and up
+		 */
+		if (!CHIP_IS_E1x(sc)) {
+			REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
+			       1);
+			DELAY(200000);
+		}
+
+		/* get device info and set params */
+		if (bnx2x_get_device_info(sc) != 0) {
+			PMD_DRV_LOG(NOTICE, sc, "getting device info");
+			return -ENXIO;
+		}
+
+/* get phy settings from shmem and 'and' against admin settings */
+		bnx2x_get_phy_info(sc);
+	} else {
+		/* Left mac of VF unfilled, PF should set it for VF */
+		memset(sc->link_params.mac_addr, 0, RTE_ETHER_ADDR_LEN);
+	}
+
+	sc->wol = 0;
+
+	/* set the default MTU (changed via ifconfig) */
+	sc->mtu = RTE_ETHER_MTU;
+
+	bnx2x_set_modes_bitmap(sc);
+
+	/* need to reset chip if UNDI was active */
+	if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+/* init fw_seq */
+		sc->fw_seq =
+		    (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
+		     DRV_MSG_SEQ_NUMBER_MASK);
+		PMD_DRV_LOG(DEBUG, sc, "prev unload fw_seq 0x%04x",
+			    sc->fw_seq);
+		bnx2x_prev_unload(sc);
+	}
+
+	bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);
+
+	/* calculate qm_cid_count */
+	sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);
+
+	sc->max_cos = 1;
+	bnx2x_init_multi_cos(sc);
+
+	return 0;
+}
+
+static void
+bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
+	       uint16_t index, uint8_t op, uint8_t update)
+{
+	uint32_t igu_addr = sc->igu_base_addr;
+	igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
+	bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
+}
+
+static void
+bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
+	   uint16_t index, uint8_t op, uint8_t update)
+{
+	if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
+		bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
+	else {
+		uint8_t segment;
+		if (CHIP_INT_MODE_IS_BC(sc)) {
+			segment = storm;
+		} else if (igu_sb_id != sc->igu_dsb_id) {
+			segment = IGU_SEG_ACCESS_DEF;
+		} else if (storm == ATTENTION_ID) {
+			segment = IGU_SEG_ACCESS_ATTN;
+		} else {
+			segment = IGU_SEG_ACCESS_DEF;
+		}
+		bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
+	}
+}
+
+static void
+bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
+		     uint8_t is_pf)
+{
+	uint32_t data, ctl, cnt = 100;
+	uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
+	uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
+	uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
+	    (idu_sb_id / 32) * 4;
+	uint32_t sb_bit = 1 << (idu_sb_id % 32);
+	uint32_t func_encode = func |
+	    (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
+	uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
+
+	/* Not supported in BC mode */
+	if (CHIP_INT_MODE_IS_BC(sc)) {
+		return;
+	}
+
+	data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
+		 IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
+		IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);
+
+	ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
+	       (func_encode << IGU_CTRL_REG_FID_SHIFT) |
+	       (IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
+
+	REG_WR(sc, igu_addr_data, data);
+
+	mb();
+
+	PMD_DRV_LOG(DEBUG, sc, "write 0x%08x to IGU(via GRC) addr 0x%x",
+		    ctl, igu_addr_ctl);
+	REG_WR(sc, igu_addr_ctl, ctl);
+
+	mb();
+
+	/* wait for clean up to finish */
+	while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
+		DELAY(20000);
+	}
+
+	if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
+		PMD_DRV_LOG(DEBUG, sc,
+			    "Unable to finish IGU cleanup: "
+			    "idu_sb_id %d offset %d bit %d (cnt %d)",
+			    idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
+	}
+}
+
+static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
+{
+	bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
+}
+
+/*******************/
+/* ECORE CALLBACKS */
+/*******************/
+
+static void bnx2x_reset_common(struct bnx2x_softc *sc)
+{
+	uint32_t val = 0x1400;
+
+	PMD_INIT_FUNC_TRACE(sc);
+
+	/* reset_common */
+	REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
+	       0xd3ffff7f);
+
+	if (CHIP_IS_E3(sc)) {
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+	}
+
+	REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
+}
+
+static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
+{
+	uint32_t shmem_base[2];
+	uint32_t shmem2_base[2];
+
+	/* Avoid common init in case MFW supports LFA */
+	if (SHMEM2_RD(sc, size) >
+	    (uint32_t) offsetof(struct shmem2_region,
+				lfa_host_addr[SC_PORT(sc)])) {
+		return;
+	}
+
+	shmem_base[0] = sc->devinfo.shmem_base;
+	shmem2_base[0] = sc->devinfo.shmem2_base;
+
+	if (!CHIP_IS_E1x(sc)) {
+		shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
+		shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
+	}
+
+	bnx2x_acquire_phy_lock(sc);
+	elink_common_init_phy(sc, shmem_base, shmem2_base,
+			      sc->devinfo.chip_id, 0);
+	bnx2x_release_phy_lock(sc);
+}
+
+static void bnx2x_pf_disable(struct bnx2x_softc *sc)
+{
+	uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+	val &= ~IGU_PF_CONF_FUNC_EN;
+
+	REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+	REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+	REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
+}
+
+static void bnx2x_init_pxp(struct bnx2x_softc *sc)
+{
+	uint16_t devctl;
+	int r_order, w_order;
+
+	devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);
+
+	w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
+	r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
+
+	ecore_init_pxp_arb(sc, r_order, w_order);
+}
+
+static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
+{
+	uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
+	uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
+	return base + (SC_ABS_FUNC(sc)) * stride;
+}
+
+/*
+ * Called only on E1H or E2.
+ * When pretending to be PF, the pretend value is the function number 0..7.
+ * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
+ * combination.
+ */
+static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
+{
+	uint32_t pretend_reg;
+
+	if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
+		return -1;
+
+	/* get my own pretend register */
+	pretend_reg = bnx2x_get_pretend_reg(sc);
+	REG_WR(sc, pretend_reg, pretend_func_val);
+	REG_RD(sc, pretend_reg);
+	return 0;
+}
+
+static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
+{
+	int is_required;
+	uint32_t val;
+	int port;
+
+	is_required = 0;
+	val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
+	       SHARED_HW_CFG_FAN_FAILURE_MASK);
+
+	if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
+		is_required = 1;
+	}
+	/*
+	 * The fan failure mechanism is usually related to the PHY type since
+	 * the power consumption of the board is affected by the PHY. Currently,
+	 * fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
+	 */
+	else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
+		for (port = PORT_0; port < PORT_MAX; port++) {
+			is_required |= elink_fan_failure_det_req(sc,
+								 sc->
+								 devinfo.shmem_base,
+								 sc->
+								 devinfo.shmem2_base,
+								 port);
+		}
+	}
+
+	if (is_required == 0) {
+		return;
+	}
+
+	/* Fan failure is indicated by SPIO 5 */
+	bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
+
+	/* set to active low mode */
+	val = REG_RD(sc, MISC_REG_SPIO_INT);
+	val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
+	REG_WR(sc, MISC_REG_SPIO_INT, val);
+
+	/* enable interrupt to signal the IGU */
+	val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
+	val |= MISC_SPIO_SPIO5;
+	REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
+}
+
+static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
+{
+	uint32_t val;
+
+	REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
+	if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
+	} else {
+		REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
+	}
+	REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
+	REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
+	/*
+	 * mask read length error interrupts in brb for parser
+	 * (parsing unit and 'checksum and crc' unit)
+	 * these errors are legal (PU reads fixed length and CAC can cause
+	 * read length error on truncated packets)
+	 */
+	REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
+	REG_WR(sc, QM_REG_QM_INT_MASK, 0);
+	REG_WR(sc, TM_REG_TM_INT_MASK, 0);
+	REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
+	REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
+	REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
+	/*      REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
+	/*      REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
+	REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
+	REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
+	REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
+	/*      REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
+	/*      REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
+	REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
+	REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
+	REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
+	REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
+	/*      REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
+	/*      REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
+
+	val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
+	       PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
+	       PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
+	if (!CHIP_IS_E1x(sc)) {
+		val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
+			PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
+	}
+	REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
+
+	REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
+	REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
+	REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
+	/*      REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
+
+	if (!CHIP_IS_E1x(sc)) {
+/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
+		REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
+	}
+
+	REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
+	REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
+	/*      REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
+	REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18);	/* bit 3,4 masked */
+}
+
+/**
+ * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
+ *
+ * @sc:     driver handle
+ */
+static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
+{
+	uint8_t abs_func_id;
+	uint32_t val;
+
+	PMD_DRV_LOG(DEBUG, sc,
+		    "starting common init for func %d", SC_ABS_FUNC(sc));
+
+	/*
+	 * take the RESET lock to protect undi_unload flow from accessing
+	 * registers while we are resetting the chip
+	 */
+	bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+	bnx2x_reset_common(sc);
+
+	REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
+
+	val = 0xfffc;
+	if (CHIP_IS_E3(sc)) {
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+	}
+
+	REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
+
+	bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+	ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(sc)) {
+/*
+ * 4-port mode or 2-port mode we need to turn off master-enable for
+ * everyone. After that we turn it back on for self. So, we disregard
+ * multi-function, and always disable all functions on the given path,
+ * this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
+ */
+		for (abs_func_id = SC_PATH(sc);
+		     abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
+			if (abs_func_id == SC_ABS_FUNC(sc)) {
+				REG_WR(sc,
+				       PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
+				       1);
+				continue;
+			}
+
+			bnx2x_pretend_func(sc, abs_func_id);
+
+			/* clear pf enable */
+			bnx2x_pf_disable(sc);
+
+			bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
+		}
+	}
+
+	ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
+	bnx2x_init_pxp(sc);
+
+#ifdef __BIG_ENDIAN
+	REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
+	REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
+	REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
+	REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
+	REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
+	/* make sure this value is 0 */
+	REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
+
+	//REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
+	REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
+	REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
+	REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
+	REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
+#endif
+
+	ecore_ilt_init_page_size(sc, INITOP_SET);
+
+	if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
+		REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
+	}
+
+	/* let the HW do it's magic... */
+	DELAY(100000);
+
+	/* finish PXP init */
+
+	val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
+	if (val != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "PXP2 CFG failed");
+		return -1;
+	}
+	val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
+	if (val != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "PXP2 RD_INIT failed");
+		return -1;
+	}
+
+	/*
+	 * Timer bug workaround for E2 only. We need to set the entire ILT to have
+	 * entries with value "0" and valid bit on. This needs to be done by the
+	 * first PF that is loaded in a path (i.e. common phase)
+	 */
+	if (!CHIP_IS_E1x(sc)) {
+/*
+ * In E2 there is a bug in the timers block that can cause function 6 / 7
+ * (i.e. vnic3) to start even if it is marked as "scan-off".
+ * This occurs when a different function (func2,3) is being marked
+ * as "scan-off". Real-life scenario for example: if a driver is being
+ * load-unloaded while func6,7 are down. This will cause the timer to access
+ * the ilt, translate to a logical address and send a request to read/write.
+ * Since the ilt for the function that is down is not valid, this will cause
+ * a translation error which is unrecoverable.
+ * The Workaround is intended to make sure that when this happens nothing
+ * fatal will occur. The workaround:
+ *  1.  First PF driver which loads on a path will:
+ *      a.  After taking the chip out of reset, by using pretend,
+ *          it will write "0" to the following registers of
+ *          the other vnics.
+ *          REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+ *          REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
+ *          REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
+ *          And for itself it will write '1' to
+ *          PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
+ *          dmae-operations (writing to pram for example.)
+ *          note: can be done for only function 6,7 but cleaner this
+ *            way.
+ *      b.  Write zero+valid to the entire ILT.
+ *      c.  Init the first_timers_ilt_entry, last_timers_ilt_entry of
+ *          VNIC3 (of that port). The range allocated will be the
+ *          entire ILT. This is needed to prevent  ILT range error.
+ *  2.  Any PF driver load flow:
+ *      a.  ILT update with the physical addresses of the allocated
+ *          logical pages.
+ *      b.  Wait 20msec. - note that this timeout is needed to make
+ *          sure there are no requests in one of the PXP internal
+ *          queues with "old" ILT addresses.
+ *      c.  PF enable in the PGLC.
+ *      d.  Clear the was_error of the PF in the PGLC. (could have
+ *          occurred while driver was down)
+ *      e.  PF enable in the CFC (WEAK + STRONG)
+ *      f.  Timers scan enable
+ *  3.  PF driver unload flow:
+ *      a.  Clear the Timers scan_en.
+ *      b.  Polling for scan_on=0 for that PF.
+ *      c.  Clear the PF enable bit in the PXP.
+ *      d.  Clear the PF enable in the CFC (WEAK + STRONG)
+ *      e.  Write zero+valid to all ILT entries (The valid bit must
+ *          stay set)
+ *      f.  If this is VNIC 3 of a port then also init
+ *          first_timers_ilt_entry to zero and last_timers_ilt_entry
+ *          to the last enrty in the ILT.
+ *
+ *      Notes:
+ *      Currently the PF error in the PGLC is non recoverable.
+ *      In the future the there will be a recovery routine for this error.
+ *      Currently attention is masked.
+ *      Having an MCP lock on the load/unload process does not guarantee that
+ *      there is no Timer disable during Func6/7 enable. This is because the
+ *      Timers scan is currently being cleared by the MCP on FLR.
+ *      Step 2.d can be done only for PF6/7 and the driver can also check if
+ *      there is error before clearing it. But the flow above is simpler and
+ *      more general.
+ *      All ILT entries are written by zero+valid and not just PF6/7
+ *      ILT entries since in the future the ILT entries allocation for
+ *      PF-s might be dynamic.
+ */
+		struct ilt_client_info ilt_cli;
+		struct ecore_ilt ilt;
+
+		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+		memset(&ilt, 0, sizeof(struct ecore_ilt));
+
+/* initialize dummy TM client */
+		ilt_cli.start = 0;
+		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+		ilt_cli.client_num = ILT_CLIENT_TM;
+
+/*
+ * Step 1: set zeroes to all ilt page entries with valid bit on
+ * Step 2: set the timers first/last ilt entry to point
+ * to the entire range to prevent ILT range error for 3rd/4th
+ * vnic (this code assumes existence of the vnic)
+ *
+ * both steps performed by call to ecore_ilt_client_init_op()
+ * with dummy TM client
+ *
+ * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
+ * and his brother are split registers
+ */
+
+		bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
+		ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
+		bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
+
+		REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
+		REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
+		REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
+	}
+
+	REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
+	REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
+
+	if (!CHIP_IS_E1x(sc)) {
+		int factor = 0;
+
+		ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
+		ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
+
+/* let the HW do it's magic... */
+		do {
+			DELAY(200000);
+			val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
+		} while (factor-- && (val != 1));
+
+		if (val != 1) {
+			PMD_DRV_LOG(NOTICE, sc, "ATC_INIT failed");
+			return -1;
+		}
+	}
+
+	ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
+
+	/* clean the DMAE memory */
+	sc->dmae_ready = 1;
+	ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8, 1);
+
+	ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
+
+	bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
+
+	ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
+
+	/* QM queues pointers table */
+	ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
+
+	/* soft reset pulse */
+	REG_WR(sc, QM_REG_SOFT_RESET, 1);
+	REG_WR(sc, QM_REG_SOFT_RESET, 0);
+
+	if (CNIC_SUPPORT(sc))
+		ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
+
+	if (!CHIP_REV_IS_SLOW(sc)) {
+/* enable hw interrupt from doorbell Q */
+		REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
+	}
+
+	ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
+
+	ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
+	REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
+	REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
+
+	if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
+		if (IS_MF_AFEX(sc)) {
+			/*
+			 * configure that AFEX and VLAN headers must be
+			 * received in AFEX mode
+			 */
+			REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
+			REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
+			REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
+			REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
+			REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
+		} else {
+			/*
+			 * Bit-map indicating which L2 hdrs may appear
+			 * after the basic Ethernet header
+			 */
+			REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
+			       sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
+		}
+	}
+
+	ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(sc)) {
+/* reset VFC memories */
+		REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+		       VFC_MEMORIES_RST_REG_CAM_RST |
+		       VFC_MEMORIES_RST_REG_RAM_RST);
+		REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+		       VFC_MEMORIES_RST_REG_CAM_RST |
+		       VFC_MEMORIES_RST_REG_RAM_RST);
+
+		DELAY(20000);
+	}
+
+	ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
+
+	/* sync semi rtc */
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
+	REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
+
+	ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(sc)) {
+		if (IS_MF_AFEX(sc)) {
+			/*
+			 * configure that AFEX and VLAN headers must be
+			 * sent in AFEX mode
+			 */
+			REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
+			REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
+			REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
+			REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
+			REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
+		} else {
+			REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
+			       sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
+		}
+	}
+
+	REG_WR(sc, SRC_REG_SOFT_RST, 1);
+
+	ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
+
+	if (CNIC_SUPPORT(sc)) {
+		REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
+		REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
+		REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
+		REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
+		REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
+		REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
+		REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
+		REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
+		REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
+		REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
+	}
+	REG_WR(sc, SRC_REG_SOFT_RST, 0);
+
+	if (sizeof(union cdu_context) != 1024) {
+/* we currently assume that a context is 1024 bytes */
+		PMD_DRV_LOG(NOTICE, sc,
+			    "please adjust the size of cdu_context(%ld)",
+			    (long)sizeof(union cdu_context));
+	}
+
+	ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
+	val = (4 << 24) + (0 << 12) + 1024;
+	REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
+
+	ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
+
+	REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
+	/* enable context validation interrupt from CFC */
+	REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
+
+	/* set the thresholds to prevent CFC/CDU race */
+	REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
+	ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
+		REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
+	}
+
+	ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
+	ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
+
+	/* Reset PCIE errors for debug */
+	REG_WR(sc, 0x2814, 0xffffffff);
+	REG_WR(sc, 0x3820, 0xffffffff);
+
+	if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
+		       (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
+			PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
+		REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
+		       (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
+			PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
+			PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
+		REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
+		       (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
+			PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
+			PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
+	}
+
+	ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
+
+	/* in E3 this done in per-port section */
+	if (!CHIP_IS_E3(sc))
+		REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
+
+	if (CHIP_IS_E1H(sc)) {
+/* not applicable for E2 (and above ...) */
+		REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
+	}
+
+	if (CHIP_REV_IS_SLOW(sc)) {
+		DELAY(200000);
+	}
+
+	/* finish CFC init */
+	val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "CFC LL_INIT failed");
+		return -1;
+	}
+	val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "CFC AC_INIT failed");
+		return -1;
+	}
+	val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "CFC CAM_INIT failed");
+		return -1;
+	}
+	REG_WR(sc, CFC_REG_DEBUG0, 0);
+
+	bnx2x_setup_fan_failure_detection(sc);
+
+	/* clear PXP2 attentions */
+	REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
+
+	bnx2x_enable_blocks_attention(sc);
+
+	if (!CHIP_REV_IS_SLOW(sc)) {
+		ecore_enable_blocks_parity(sc);
+	}
+
+	if (!BNX2X_NOMCP(sc)) {
+		if (CHIP_IS_E1x(sc)) {
+			bnx2x_common_init_phy(sc);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
+ *
+ * @sc:     driver handle
+ */
+static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
+{
+	int rc = bnx2x_init_hw_common(sc);
+
+	if (rc) {
+		return rc;
+	}
+
+	/* In E2 2-PORT mode, same ext phy is used for the two paths */
+	if (!BNX2X_NOMCP(sc)) {
+		bnx2x_common_init_phy(sc);
+	}
+
+	return 0;
+}
+
+static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
+	uint32_t low, high;
+	uint32_t val;
+
+	PMD_DRV_LOG(DEBUG, sc, "starting port init for port %d", port);
+
+	REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
+
+	ecore_init_block(sc, BLOCK_MISC, init_phase);
+	ecore_init_block(sc, BLOCK_PXP, init_phase);
+	ecore_init_block(sc, BLOCK_PXP2, init_phase);
+
+	/*
+	 * Timers bug workaround: disables the pf_master bit in pglue at
+	 * common phase, we need to enable it here before any dmae access are
+	 * attempted. Therefore we manually added the enable-master to the
+	 * port phase (it also happens in the function phase)
+	 */
+	if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+	}
+
+	ecore_init_block(sc, BLOCK_ATC, init_phase);
+	ecore_init_block(sc, BLOCK_DMAE, init_phase);
+	ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
+	ecore_init_block(sc, BLOCK_QM, init_phase);
+
+	ecore_init_block(sc, BLOCK_TCM, init_phase);
+	ecore_init_block(sc, BLOCK_UCM, init_phase);
+	ecore_init_block(sc, BLOCK_CCM, init_phase);
+	ecore_init_block(sc, BLOCK_XCM, init_phase);
+
+	/* QM cid (connection) count */
+	ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
+
+	if (CNIC_SUPPORT(sc)) {
+		ecore_init_block(sc, BLOCK_TM, init_phase);
+		REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
+		REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
+	}
+
+	ecore_init_block(sc, BLOCK_DORQ, init_phase);
+
+	ecore_init_block(sc, BLOCK_BRB1, init_phase);
+
+	if (CHIP_IS_E1H(sc)) {
+		if (IS_MF(sc)) {
+			low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
+		} else if (sc->mtu > 4096) {
+			if (BNX2X_ONE_PORT(sc)) {
+				low = 160;
+			} else {
+				val = sc->mtu;
+				/* (24*1024 + val*4)/256 */
+				low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
+			}
+		} else {
+			low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
+		}
+		high = (low + 56);	/* 14*1024/256 */
+		REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
+		REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
+	}
+
+	if (CHIP_IS_MODE_4_PORT(sc)) {
+		REG_WR(sc, SC_PORT(sc) ?
+		       BRB1_REG_MAC_GUARANTIED_1 :
+		       BRB1_REG_MAC_GUARANTIED_0, 40);
+	}
+
+	ecore_init_block(sc, BLOCK_PRS, init_phase);
+	if (CHIP_IS_E3B0(sc)) {
+		if (IS_MF_AFEX(sc)) {
+			/* configure headers for AFEX mode */
+			if (SC_PORT(sc)) {
+				REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
+				       0xE);
+				REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
+				       0x6);
+				REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
+			} else {
+				REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
+				       0xE);
+				REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
+				       0x6);
+				REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
+			}
+		} else {
+			/* Ovlan exists only if we are in multi-function +
+			 * switch-dependent mode, in switch-independent there
+			 * is no ovlan headers
+			 */
+			REG_WR(sc, SC_PORT(sc) ?
+			       PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
+			       PRS_REG_HDRS_AFTER_BASIC_PORT_0,
+			       (sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
+		}
+	}
+
+	ecore_init_block(sc, BLOCK_TSDM, init_phase);
+	ecore_init_block(sc, BLOCK_CSDM, init_phase);
+	ecore_init_block(sc, BLOCK_USDM, init_phase);
+	ecore_init_block(sc, BLOCK_XSDM, init_phase);
+
+	ecore_init_block(sc, BLOCK_TSEM, init_phase);
+	ecore_init_block(sc, BLOCK_USEM, init_phase);
+	ecore_init_block(sc, BLOCK_CSEM, init_phase);
+	ecore_init_block(sc, BLOCK_XSEM, init_phase);
+
+	ecore_init_block(sc, BLOCK_UPB, init_phase);
+	ecore_init_block(sc, BLOCK_XPB, init_phase);
+
+	ecore_init_block(sc, BLOCK_PBF, init_phase);
+
+	if (CHIP_IS_E1x(sc)) {
+/* configure PBF to work without PAUSE mtu 9000 */
+		REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
+
+/* update threshold */
+		REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
+/* update init credit */
+		REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
+		       (9040 / 16) + 553 - 22);
+
+/* probe changes */
+		REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
+		DELAY(50);
+		REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
+	}
+
+	if (CNIC_SUPPORT(sc)) {
+		ecore_init_block(sc, BLOCK_SRC, init_phase);
+	}
+
+	ecore_init_block(sc, BLOCK_CDU, init_phase);
+	ecore_init_block(sc, BLOCK_CFC, init_phase);
+	ecore_init_block(sc, BLOCK_HC, init_phase);
+	ecore_init_block(sc, BLOCK_IGU, init_phase);
+	ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
+	/* init aeu_mask_attn_func_0/1:
+	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
+	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
+	 *             bits 4-7 are used for "per vn group attention" */
+	val = IS_MF(sc) ? 0xF7 : 0x7;
+	val |= 0x10;
+	REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);
+
+	ecore_init_block(sc, BLOCK_NIG, init_phase);
+
+	if (!CHIP_IS_E1x(sc)) {
+/* Bit-map indicating which L2 hdrs may appear after the
+ * basic Ethernet header
+ */
+		if (IS_MF_AFEX(sc)) {
+			REG_WR(sc, SC_PORT(sc) ?
+			       NIG_REG_P1_HDRS_AFTER_BASIC :
+			       NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
+		} else {
+			REG_WR(sc, SC_PORT(sc) ?
+			       NIG_REG_P1_HDRS_AFTER_BASIC :
+			       NIG_REG_P0_HDRS_AFTER_BASIC,
+			       IS_MF_SD(sc) ? 7 : 6);
+		}
+
+		if (CHIP_IS_E3(sc)) {
+			REG_WR(sc, SC_PORT(sc) ?
+			       NIG_REG_LLH1_MF_MODE :
+			       NIG_REG_LLH_MF_MODE, IS_MF(sc));
+		}
+	}
+	if (!CHIP_IS_E3(sc)) {
+		REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
+	}
+
+	/* 0x2 disable mf_ov, 0x1 enable */
+	REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
+	       (IS_MF_SD(sc) ? 0x1 : 0x2));
+
+	if (!CHIP_IS_E1x(sc)) {
+		val = 0;
+		switch (sc->devinfo.mf_info.mf_mode) {
+		case MULTI_FUNCTION_SD:
+			val = 1;
+			break;
+		case MULTI_FUNCTION_SI:
+		case MULTI_FUNCTION_AFEX:
+			val = 2;
+			break;
+		}
+
+		REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
+			    NIG_REG_LLH0_CLS_TYPE), val);
+	}
+	REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
+	REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
+	REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
+
+	/* If SPIO5 is set to generate interrupts, enable it for this port */
+	val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
+	if (val & MISC_SPIO_SPIO5) {
+		uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+				     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+		val = REG_RD(sc, reg_addr);
+		val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+		REG_WR(sc, reg_addr, val);
+	}
+
+	return 0;
+}
+
+static uint32_t
+bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
+		       uint32_t expected, uint32_t poll_count)
+{
+	uint32_t cur_cnt = poll_count;
+	uint32_t val;
+
+	while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
+		DELAY(FLR_WAIT_INTERVAL);
+	}
+
+	return val;
+}
+
+static int
+bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
+			      __rte_unused const char *msg, uint32_t poll_cnt)
+{
+	uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
+
+	if (val != 0) {
+		PMD_DRV_LOG(NOTICE, sc, "%s usage count=%d", msg, val);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Common routines with VF FLR cleanup */
+static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
+{
+	/* adjust polling timeout */
+	if (CHIP_REV_IS_EMUL(sc)) {
+		return FLR_POLL_CNT * 2000;
+	}
+
+	if (CHIP_REV_IS_FPGA(sc)) {
+		return FLR_POLL_CNT * 120;
+	}
+
+	return FLR_POLL_CNT;
+}
+
+static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
+{
+	/* wait for CFC PF usage-counter to zero (includes all the VFs) */
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  CFC_REG_NUM_LCIDS_INSIDE_PF,
+					  "CFC PF usage counter timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  DORQ_REG_PF_USAGE_CNT,
+					  "DQ PF usage counter timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
+					  "QM PF usage counter timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
+					  "Timers VNIC usage counter timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  TM_REG_LIN0_NUM_SCANS +
+					  4 * SC_PORT(sc),
+					  "Timers NUM_SCANS usage counter timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	/* Wait DMAE PF usage counter to zero */
+	if (bnx2x_flr_clnup_poll_hw_counter(sc,
+					  dmae_reg_go_c[INIT_DMAE_C(sc)],
+					  "DMAE dommand register timed out",
+					  poll_cnt)) {
+		return -1;
+	}
+
+	return 0;
+}
+
+#define OP_GEN_PARAM(param)                                            \
+	(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
+#define OP_GEN_TYPE(type)                                           \
+	(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
+#define OP_GEN_AGG_VECT(index)                                             \
+	(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
+
+static int
+bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
+		     uint32_t poll_cnt)
+{
+	uint32_t op_gen_command = 0;
+	uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
+			      CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
+	int ret = 0;
+
+	if (REG_RD(sc, comp_addr)) {
+		PMD_DRV_LOG(NOTICE, sc,
+			    "Cleanup complete was not 0 before sending");
+		return -1;
+	}
+
+	op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
+	op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
+	op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
+	op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
+
+	REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
+
+	if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
+		PMD_DRV_LOG(NOTICE, sc, "FW final cleanup did not succeed");
+		PMD_DRV_LOG(DEBUG, sc, "At timeout completion address contained %x",
+			    (REG_RD(sc, comp_addr)));
+		rte_panic("FLR cleanup failed");
+		return -1;
+	}
+
+	/* Zero completion for nxt FLR */
+	REG_WR(sc, comp_addr, 0);
+
+	return ret;
+}
+
+static void
+bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
+		       uint32_t poll_count)
+{
+	uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
+	uint32_t cur_cnt = poll_count;
+
+	crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
+	crd = crd_start = REG_RD(sc, regs->crd);
+	init_crd = REG_RD(sc, regs->init_crd);
+
+	while ((crd != init_crd) &&
+	       ((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
+		(init_crd - crd_start))) {
+		if (cur_cnt--) {
+			DELAY(FLR_WAIT_INTERVAL);
+			crd = REG_RD(sc, regs->crd);
+			crd_freed = REG_RD(sc, regs->crd_freed);
+		} else {
+			break;
+		}
+	}
+}
+
+static void
+bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
+		       uint32_t poll_count)
+{
+	uint32_t occup, to_free, freed, freed_start;
+	uint32_t cur_cnt = poll_count;
+
+	occup = to_free = REG_RD(sc, regs->lines_occup);
+	freed = freed_start = REG_RD(sc, regs->lines_freed);
+
+	while (occup &&
+	       ((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
+		to_free)) {
+		if (cur_cnt--) {
+			DELAY(FLR_WAIT_INTERVAL);
+			occup = REG_RD(sc, regs->lines_occup);
+			freed = REG_RD(sc, regs->lines_freed);
+		} else {
+			break;
+		}
+	}
+}
+
+static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
+{
+	struct pbf_pN_cmd_regs cmd_regs[] = {
+		{0, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
+		{1, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
+		{4, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
+		 PBF_REG_P4_TQ_LINES_FREED_CNT}
+	};
+
+	struct pbf_pN_buf_regs buf_regs[] = {
+		{0, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
+		 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
+		 PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
+		{1, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
+		 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
+		 PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
+		{4, (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
+		 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
+		 (CHIP_IS_E3B0(sc)) ?
+		 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
+		 PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
+	};
+
+	uint32_t i;
+
+	/* Verify the command queues are flushed P0, P1, P4 */
+	for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
+		bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
+	}
+
+	/* Verify the transmission buffers are flushed P0, P1, P4 */
+	for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
+		bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
+	}
+}
+
+static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
+{
+	__rte_unused uint32_t val;
+
+	val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
+	PMD_DRV_LOG(DEBUG, sc, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);
+
+	val = REG_RD(sc, PBF_REG_DISABLE_PF);
+	PMD_DRV_LOG(DEBUG, sc, "PBF_REG_DISABLE_PF is 0x%x", val);
+
+	val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
+	PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);
+
+	val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
+	PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);
+
+	val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
+	PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);
+
+	val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
+	PMD_DRV_LOG(DEBUG, sc,
+		    "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);
+
+	val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
+	PMD_DRV_LOG(DEBUG, sc,
+		    "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);
+
+	val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
+	PMD_DRV_LOG(DEBUG, sc, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
+		    val);
+}
+
+/**
+ *	bnx2x_pf_flr_clnup
+ *	a. re-enable target read on the PF
+ *	b. poll cfc per function usgae counter
+ *	c. poll the qm perfunction usage counter
+ *	d. poll the tm per function usage counter
+ *	e. poll the tm per function scan-done indication
+ *	f. clear the dmae channel associated wit hthe PF
+ *	g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
+ *	h. call the common flr cleanup code with -1 (pf indication)
+ */
+static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
+{
+	uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);
+
+	/* Re-enable PF target read access */
+	REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
+
+	/* Poll HW usage counters */
+	if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
+		return -1;
+	}
+
+	/* Zero the igu 'trailing edge' and 'leading edge' */
+
+	/* Send the FW cleanup command */
+	if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
+		return -1;
+	}
+
+	/* ATC cleanup */
+
+	/* Verify TX hw is flushed */
+	bnx2x_tx_hw_flushed(sc, poll_cnt);
+
+	/* Wait 100ms (not adjusted according to platform) */
+	DELAY(100000);
+
+	/* Verify no pending pci transactions */
+	if (bnx2x_is_pcie_pending(sc)) {
+		PMD_DRV_LOG(NOTICE, sc, "PCIE Transactions still pending");
+	}
+
+	/* Debug */
+	bnx2x_hw_enable_status(sc);
+
+	/*
+	 * Master enable - Due to WB DMAE writes performed before this
+	 * register is re-initialized as part of the regular function init
+	 */
+	REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+
+	return 0;
+}
+
+static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	int func = SC_FUNC(sc);
+	int init_phase = PHASE_PF0 + func;
+	struct ecore_ilt *ilt = sc->ilt;
+	uint16_t cdu_ilt_start;
+	uint32_t addr, val;
+	uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
+	int main_mem_width, rc;
+	uint32_t i;
+
+	PMD_DRV_LOG(DEBUG, sc, "starting func init for func %d", func);
+
+	/* FLR cleanup */
+	if (!CHIP_IS_E1x(sc)) {
+		rc = bnx2x_pf_flr_clnup(sc);
+		if (rc) {
+			PMD_DRV_LOG(NOTICE, sc, "FLR cleanup failed!");
+			return rc;
+		}
+	}
+
+	/* set MSI reconfigure capability */
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
+		val = REG_RD(sc, addr);
+		val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
+		REG_WR(sc, addr, val);
+	}
+
+	ecore_init_block(sc, BLOCK_PXP, init_phase);
+	ecore_init_block(sc, BLOCK_PXP2, init_phase);
+
+	ilt = sc->ilt;
+	cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
+
+	for (i = 0; i < L2_ILT_LINES(sc); i++) {
+		ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
+		ilt->lines[cdu_ilt_start + i].page_mapping =
+		    (rte_iova_t)sc->context[i].vcxt_dma.paddr;
+		ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
+	}
+	ecore_ilt_init_op(sc, INITOP_SET);
+
+	REG_WR(sc, PRS_REG_NIC_MODE, 1);
+
+	if (!CHIP_IS_E1x(sc)) {
+		uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
+
+/* Turn on a single ISR mode in IGU if driver is going to use
+ * INT#x or MSI
+ */
+		if ((sc->interrupt_mode != INTR_MODE_MSIX)
+		    || (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
+			pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
+		}
+
+/*
+ * Timers workaround bug: function init part.
+ * Need to wait 20msec after initializing ILT,
+ * needed to make sure there are no requests in
+ * one of the PXP internal queues with "old" ILT addresses
+ */
+		DELAY(20000);
+
+/*
+ * Master enable - Due to WB DMAE writes performed before this
+ * register is re-initialized as part of the regular function
+ * init
+ */
+		REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+/* Enable the function in IGU */
+		REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
+	}
+
+	sc->dmae_ready = 1;
+
+	ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
+
+	if (!CHIP_IS_E1x(sc))
+		REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
+
+	ecore_init_block(sc, BLOCK_ATC, init_phase);
+	ecore_init_block(sc, BLOCK_DMAE, init_phase);
+	ecore_init_block(sc, BLOCK_NIG, init_phase);
+	ecore_init_block(sc, BLOCK_SRC, init_phase);
+	ecore_init_block(sc, BLOCK_MISC, init_phase);
+	ecore_init_block(sc, BLOCK_TCM, init_phase);
+	ecore_init_block(sc, BLOCK_UCM, init_phase);
+	ecore_init_block(sc, BLOCK_CCM, init_phase);
+	ecore_init_block(sc, BLOCK_XCM, init_phase);
+	ecore_init_block(sc, BLOCK_TSEM, init_phase);
+	ecore_init_block(sc, BLOCK_USEM, init_phase);
+	ecore_init_block(sc, BLOCK_CSEM, init_phase);
+	ecore_init_block(sc, BLOCK_XSEM, init_phase);
+
+	if (!CHIP_IS_E1x(sc))
+		REG_WR(sc, QM_REG_PF_EN, 1);
+
+	if (!CHIP_IS_E1x(sc)) {
+		REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+	}
+	ecore_init_block(sc, BLOCK_QM, init_phase);
+
+	ecore_init_block(sc, BLOCK_TM, init_phase);
+	ecore_init_block(sc, BLOCK_DORQ, init_phase);
+
+	ecore_init_block(sc, BLOCK_BRB1, init_phase);
+	ecore_init_block(sc, BLOCK_PRS, init_phase);
+	ecore_init_block(sc, BLOCK_TSDM, init_phase);
+	ecore_init_block(sc, BLOCK_CSDM, init_phase);
+	ecore_init_block(sc, BLOCK_USDM, init_phase);
+	ecore_init_block(sc, BLOCK_XSDM, init_phase);
+	ecore_init_block(sc, BLOCK_UPB, init_phase);
+	ecore_init_block(sc, BLOCK_XPB, init_phase);
+	ecore_init_block(sc, BLOCK_PBF, init_phase);
+	if (!CHIP_IS_E1x(sc))
+		REG_WR(sc, PBF_REG_DISABLE_PF, 0);
+
+	ecore_init_block(sc, BLOCK_CDU, init_phase);
+
+	ecore_init_block(sc, BLOCK_CFC, init_phase);
+
+	if (!CHIP_IS_E1x(sc))
+		REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
+
+	if (IS_MF(sc)) {
+		REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
+		REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
+	}
+
+	ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
+
+	/* HC init per function */
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		if (CHIP_IS_E1H(sc)) {
+			REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+
+			REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
+			REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
+		}
+		ecore_init_block(sc, BLOCK_HC, init_phase);
+
+	} else {
+		uint32_t num_segs, sb_idx, prod_offset;
+
+		REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+
+		if (!CHIP_IS_E1x(sc)) {
+			REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
+			REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
+		}
+
+		ecore_init_block(sc, BLOCK_IGU, init_phase);
+
+		if (!CHIP_IS_E1x(sc)) {
+			int dsb_idx = 0;
+	/**
+	 * Producer memory:
+	 * E2 mode: address 0-135 match to the mapping memory;
+	 * 136 - PF0 default prod; 137 - PF1 default prod;
+	 * 138 - PF2 default prod; 139 - PF3 default prod;
+	 * 140 - PF0 attn prod;    141 - PF1 attn prod;
+	 * 142 - PF2 attn prod;    143 - PF3 attn prod;
+	 * 144-147 reserved.
+	 *
+	 * E1.5 mode - In backward compatible mode;
+	 * for non default SB; each even line in the memory
+	 * holds the U producer and each odd line hold
+	 * the C producer. The first 128 producers are for
+	 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
+	 * producers are for the DSB for each PF.
+	 * Each PF has five segments: (the order inside each
+	 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
+	 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
+	 * 144-147 attn prods;
+	 */
+			/* non-default-status-blocks */
+			num_segs = CHIP_INT_MODE_IS_BC(sc) ?
+			    IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
+			for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
+				prod_offset = (sc->igu_base_sb + sb_idx) *
+				    num_segs;
+
+				for (i = 0; i < num_segs; i++) {
+					addr = IGU_REG_PROD_CONS_MEMORY +
+					    (prod_offset + i) * 4;
+					REG_WR(sc, addr, 0);
+				}
+				/* send consumer update with value 0 */
+				bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
+					   USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
+			}
+
+			/* default-status-blocks */
+			num_segs = CHIP_INT_MODE_IS_BC(sc) ?
+			    IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
+
+			if (CHIP_IS_MODE_4_PORT(sc))
+				dsb_idx = SC_FUNC(sc);
+			else
+				dsb_idx = SC_VN(sc);
+
+			prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
+				       IGU_BC_BASE_DSB_PROD + dsb_idx :
+				       IGU_NORM_BASE_DSB_PROD + dsb_idx);
+
+			/*
+			 * igu prods come in chunks of E1HVN_MAX (4) -
+			 * does not matters what is the current chip mode
+			 */
+			for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
+				addr = IGU_REG_PROD_CONS_MEMORY +
+				    (prod_offset + i) * 4;
+				REG_WR(sc, addr, 0);
+			}
+			/* send consumer update with 0 */
+			if (CHIP_INT_MODE_IS_BC(sc)) {
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   CSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   XSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   TSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   ATTENTION_ID, 0, IGU_INT_NOP, 1);
+			} else {
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(sc, sc->igu_dsb_id,
+					   ATTENTION_ID, 0, IGU_INT_NOP, 1);
+			}
+			bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);
+
+			/* !!! these should become driver const once
+			   rf-tool supports split-68 const */
+			REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
+			REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
+			REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
+			REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
+			REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
+			REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
+		}
+	}
+
+	/* Reset PCIE errors for debug */
+	REG_WR(sc, 0x2114, 0xffffffff);
+	REG_WR(sc, 0x2120, 0xffffffff);
+
+	if (CHIP_IS_E1x(sc)) {
+		main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2;	/*dwords */
+		main_mem_base = HC_REG_MAIN_MEMORY +
+		    SC_PORT(sc) * (main_mem_size * 4);
+		main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
+		main_mem_width = 8;
+
+		val = REG_RD(sc, main_mem_prty_clr);
+		if (val) {
+			PMD_DRV_LOG(DEBUG, sc,
+				    "Parity errors in HC block during function init (0x%x)!",
+				    val);
+		}
+
+/* Clear "false" parity errors in MSI-X table */
+		for (i = main_mem_base;
+		     i < main_mem_base + main_mem_size * 4;
+		     i += main_mem_width) {
+			bnx2x_read_dmae(sc, i, main_mem_width / 4);
+			bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
+				       i, main_mem_width / 4);
+		}
+/* Clear HC parity attention */
+		REG_RD(sc, main_mem_prty_clr);
+	}
+
+	/* Enable STORMs SP logging */
+	REG_WR8(sc, BAR_USTRORM_INTMEM +
+		USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+	REG_WR8(sc, BAR_TSTRORM_INTMEM +
+		TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+	REG_WR8(sc, BAR_CSTRORM_INTMEM +
+		CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+	REG_WR8(sc, BAR_XSTRORM_INTMEM +
+		XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+
+	elink_phy_probe(&sc->link_params);
+
+	return 0;
+}
+
+static void bnx2x_link_reset(struct bnx2x_softc *sc)
+{
+	if (!BNX2X_NOMCP(sc)) {
+		bnx2x_acquire_phy_lock(sc);
+		elink_lfa_reset(&sc->link_params, &sc->link_vars);
+		bnx2x_release_phy_lock(sc);
+	} else {
+		if (!CHIP_REV_IS_SLOW(sc)) {
+			PMD_DRV_LOG(WARNING, sc,
+				    "Bootcode is missing - cannot reset link");
+		}
+	}
+}
+
+static void bnx2x_reset_port(struct bnx2x_softc *sc)
+{
+	int port = SC_PORT(sc);
+	uint32_t val;
+
+	/* reset physical Link */
+	bnx2x_link_reset(sc);
+
+	REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
+
+	/* Do not rcv packets to BRB */
+	REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
+	/* Do not direct rcv packets that are not for MCP to the BRB */
+	REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
+		    NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+
+	/* Configure AEU */
+	REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
+
+	DELAY(100000);
+
+	/* Check for BRB port occupancy */
+	val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
+	if (val) {
+		PMD_DRV_LOG(DEBUG, sc,
+			    "BRB1 is not empty, %d blocks are occupied", val);
+	}
+}
+
+static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, rte_iova_t addr)
+{
+	int reg;
+	uint32_t wb_write[2];
+
+	reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
+
+	wb_write[0] = ONCHIP_ADDR1(addr);
+	wb_write[1] = ONCHIP_ADDR2(addr);
+	REG_WR_DMAE(sc, reg, wb_write, 2);
+}
+
+static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
+{
+	uint32_t i, base = FUNC_ILT_BASE(func);
+	for (i = base; i < base + ILT_PER_FUNC; i++) {
+		bnx2x_ilt_wr(sc, i, 0);
+	}
+}
+
+static void bnx2x_reset_func(struct bnx2x_softc *sc)
+{
+	struct bnx2x_fastpath *fp;
+	int port = SC_PORT(sc);
+	int func = SC_FUNC(sc);
+	int i;
+
+	/* Disable the function in the FW */
+	REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
+
+	/* FP SBs */
+	FOR_EACH_ETH_QUEUE(sc, i) {
+		fp = &sc->fp[i];
+		REG_WR8(sc, BAR_CSTRORM_INTMEM +
+			CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
+			SB_DISABLED);
+	}
+
+	/* SP SB */
+	REG_WR8(sc, BAR_CSTRORM_INTMEM +
+		CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);
+
+	for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
+		REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
+		       0);
+	}
+
+	/* Configure IGU */
+	if (sc->devinfo.int_block == INT_BLOCK_HC) {
+		REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
+		REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
+	} else {
+		REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
+		REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
+	}
+
+	if (CNIC_LOADED(sc)) {
+/* Disable Timer scan */
+		REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
+/*
+ * Wait for at least 10ms and up to 2 second for the timers
+ * scan to complete
+ */
+		for (i = 0; i < 200; i++) {
+			DELAY(10000);
+			if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
+				break;
+		}
+	}
+
+	/* Clear ILT */
+	bnx2x_clear_func_ilt(sc, func);
+
+	/*
+	 * Timers workaround bug for E2: if this is vnic-3,
+	 * we need to set the entire ilt range for this timers.
+	 */
+	if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
+		struct ilt_client_info ilt_cli;
+/* use dummy TM client */
+		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+		ilt_cli.start = 0;
+		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+		ilt_cli.client_num = ILT_CLIENT_TM;
+
+		ecore_ilt_boundary_init_op(sc, &ilt_cli, 0, INITOP_CLEAR);
+	}
+
+	/* this assumes that reset_port() called before reset_func() */
+	if (!CHIP_IS_E1x(sc)) {
+		bnx2x_pf_disable(sc);
+	}
+
+	sc->dmae_ready = 0;
+}
+
+static void bnx2x_release_firmware(struct bnx2x_softc *sc)
+{
+	rte_free(sc->init_ops);
+	rte_free(sc->init_ops_offsets);
+	rte_free(sc->init_data);
+	rte_free(sc->iro_array);
+}
+
+static int bnx2x_init_firmware(struct bnx2x_softc *sc)
+{
+	uint32_t len, i;
+	uint8_t *p = sc->firmware;
+	uint32_t off[24];
+
+	for (i = 0; i < 24; ++i)
+		off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));
+
+	len = off[0];
+	sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+	if (!sc->init_ops)
+		goto alloc_failed;
+	bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);
+
+	len = off[2];
+	sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+	if (!sc->init_ops_offsets)
+		goto alloc_failed;
+	bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);
+
+	len = off[4];
+	sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+	if (!sc->init_data)
+		goto alloc_failed;
+	bnx2x_data_to_init_data(p + off[5], sc->init_data, len);
+
+	sc->tsem_int_table_data = p + off[7];
+	sc->tsem_pram_data = p + off[9];
+	sc->usem_int_table_data = p + off[11];
+	sc->usem_pram_data = p + off[13];
+	sc->csem_int_table_data = p + off[15];
+	sc->csem_pram_data = p + off[17];
+	sc->xsem_int_table_data = p + off[19];
+	sc->xsem_pram_data = p + off[21];
+
+	len = off[22];
+	sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+	if (!sc->iro_array)
+		goto alloc_failed;
+	bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);
+
+	return 0;
+
+alloc_failed:
+	bnx2x_release_firmware(sc);
+	return -1;
+}
+
+static int cut_gzip_prefix(const uint8_t * zbuf, int len)
+{
+#define MIN_PREFIX_SIZE (10)
+
+	int n = MIN_PREFIX_SIZE;
+	uint16_t xlen;
+
+	if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
+	    len <= MIN_PREFIX_SIZE) {
+		return -1;
+	}
+
+	/* optional extra fields are present */
+	if (zbuf[3] & 0x4) {
+		xlen = zbuf[13];
+		xlen <<= 8;
+		xlen += zbuf[12];
+
+		n += xlen;
+	}
+	/* file name is present */
+	if (zbuf[3] & 0x8) {
+		while ((zbuf[n++] != 0) && (n < len)) ;
+	}
+
+	return n;
+}
+
+static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
+{
+	int ret;
+	int data_begin = cut_gzip_prefix(zbuf, len);
+
+	PMD_DRV_LOG(DEBUG, sc, "ecore_gunzip %d", len);
+
+	if (data_begin <= 0) {
+		PMD_DRV_LOG(NOTICE, sc, "bad gzip prefix");
+		return -1;
+	}
+
+	memset(&zlib_stream, 0, sizeof(zlib_stream));
+	zlib_stream.next_in = zbuf + data_begin;
+	zlib_stream.avail_in = len - data_begin;
+	zlib_stream.next_out = sc->gz_buf;
+	zlib_stream.avail_out = FW_BUF_SIZE;
+
+	ret = inflateInit2(&zlib_stream, -MAX_WBITS);
+	if (ret != Z_OK) {
+		PMD_DRV_LOG(NOTICE, sc, "zlib inflateInit2 error");
+		return ret;
+	}
+
+	ret = inflate(&zlib_stream, Z_FINISH);
+	if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
+		PMD_DRV_LOG(NOTICE, sc, "zlib inflate error: %d %s", ret,
+			    zlib_stream.msg);
+	}
+
+	sc->gz_outlen = zlib_stream.total_out;
+	if (sc->gz_outlen & 0x3) {
+		PMD_DRV_LOG(NOTICE, sc, "firmware is not aligned. gz_outlen == %d",
+			    sc->gz_outlen);
+	}
+	sc->gz_outlen >>= 2;
+
+	inflateEnd(&zlib_stream);
+
+	if (ret == Z_STREAM_END)
+		return 0;
+
+	return ret;
+}
+
+static void
+ecore_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
+			  uint32_t addr, uint32_t len)
+{
+	bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
+}
+
+void
+ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
+			  uint32_t * data)
+{
+	uint8_t i;
+	for (i = 0; i < size / 4; i++) {
+		REG_WR(sc, addr + (i * 4), data[i]);
+	}
+}
+
+static const char *get_ext_phy_type(uint32_t ext_phy_type)
+{
+	uint32_t phy_type_idx = ext_phy_type >> 8;
+	static const char *types[] =
+	    { "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
+		"BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
+		"BNX2X-8727",
+		"BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
+	};
+
+	if (phy_type_idx < 12)
+		return types[phy_type_idx];
+	else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
+		return types[12];
+	else
+		return types[13];
+}
+
+static const char *get_state(uint32_t state)
+{
+	uint32_t state_idx = state >> 12;
+	static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
+		"OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
+		"CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
+		"UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
+	};
+
+	if (state_idx <= 0xF)
+		return states[state_idx];
+	else
+		return states[0x10];
+}
+
+static const char *get_recovery_state(uint32_t state)
+{
+	static const char *states[] = { "NONE", "DONE", "INIT",
+		"WAIT", "FAILED", "NIC_LOADING"
+	};
+	return states[state];
+}
+
+static const char *get_rx_mode(uint32_t mode)
+{
+	static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
+		"PROMISC", "MAX_MULTICAST", "ERROR"
+	};
+
+	if (mode < 0x4)
+		return modes[mode];
+	else if (BNX2X_MAX_MULTICAST == mode)
+		return modes[4];
+	else
+		return modes[5];
+}
+
+#define BNX2X_INFO_STR_MAX 256
+static const char *get_bnx2x_flags(uint32_t flags)
+{
+	int i;
+	static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
+		"NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
+		"USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
+		"SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
+	};
+	static char flag_str[BNX2X_INFO_STR_MAX];
+	memset(flag_str, 0, BNX2X_INFO_STR_MAX);
+
+	for (i = 0; i < 5; i++)
+		if (flags & (1 << i)) {
+			strlcat(flag_str, flag[i], sizeof(flag_str));
+			flags ^= (1 << i);
+		}
+	if (flags) {
+		static char unknown[BNX2X_INFO_STR_MAX];
+		snprintf(unknown, 32, "Unknown flag mask %x", flags);
+		strlcat(flag_str, unknown, sizeof(flag_str));
+	}
+	return flag_str;
+}
+
+/* Prints useful adapter info. */
+void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
+{
+	int i = 0;
+
+	PMD_DRV_LOG(INFO, sc, "========================================");
+	/* DPDK and Driver versions */
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "DPDK",
+			rte_version());
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "Driver",
+			bnx2x_pmd_version());
+	/* Firmware versions. */
+	PMD_DRV_LOG(INFO, sc, "%12s : %d.%d.%d",
+		     "Firmware",
+		     BNX2X_5710_FW_MAJOR_VERSION,
+		     BNX2X_5710_FW_MINOR_VERSION,
+		     BNX2X_5710_FW_REVISION_VERSION);
+	PMD_DRV_LOG(INFO, sc, "%12s : %s",
+		     "Bootcode", sc->devinfo.bc_ver_str);
+	/* Hardware chip info. */
+	PMD_DRV_LOG(INFO, sc, "%12s : %#08x", "ASIC", sc->devinfo.chip_id);
+	PMD_DRV_LOG(INFO, sc, "%12s : %c%d", "Rev", (CHIP_REV(sc) >> 12) + 'A',
+		     (CHIP_METAL(sc) >> 4));
+	/* Bus PCIe info. */
+	PMD_DRV_LOG(INFO, sc, "%12s : 0x%x", "Vendor Id",
+		    sc->devinfo.vendor_id);
+	PMD_DRV_LOG(INFO, sc, "%12s : 0x%x", "Device Id",
+		    sc->devinfo.device_id);
+	PMD_DRV_LOG(INFO, sc, "%12s : width x%d, ", "Bus PCIe",
+		    sc->devinfo.pcie_link_width);
+	switch (sc->devinfo.pcie_link_speed) {
+	case 1:
+		PMD_DRV_LOG(INFO, sc, "%23s", "2.5 Gbps");
+		break;
+	case 2:
+		PMD_DRV_LOG(INFO, sc, "%21s", "5 Gbps");
+		break;
+	case 4:
+		PMD_DRV_LOG(INFO, sc, "%21s", "8 Gbps");
+		break;
+	default:
+		PMD_DRV_LOG(INFO, sc, "%33s", "Unknown link speed");
+	}
+	/* Device features. */
+	PMD_DRV_LOG(INFO, sc, "%12s : ", "Flags");
+	/* Miscellaneous flags. */
+	if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
+		PMD_DRV_LOG(INFO, sc, "%18s", "MSI");
+		i++;
+	}
+	if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
+		if (i > 0)
+			PMD_DRV_LOG(INFO, sc, "|");
+		PMD_DRV_LOG(INFO, sc, "%20s", "MSI-X");
+		i++;
+	}
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "MF", (IS_MF(sc) ? "YES" : "NO"));
+	PMD_DRV_LOG(INFO, sc, "========================================");
+}
+
+/* Prints useful device info. */
+void bnx2x_print_device_info(struct bnx2x_softc *sc)
+{
+	__rte_unused uint32_t ext_phy_type;
+	uint32_t offset, reg_val;
+
+	PMD_INIT_FUNC_TRACE(sc);
+	offset = offsetof(struct shmem_region,
+			  dev_info.port_hw_config[0].external_phy_config);
+	reg_val = REG_RD(sc, sc->devinfo.shmem_base + offset);
+	if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
+		ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(reg_val);
+	else
+		ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(reg_val);
+
+	/* Device features. */
+	PMD_DRV_LOG(INFO, sc, "%12s : %u", "Bnx2x Func", sc->pcie_func);
+	PMD_DRV_LOG(INFO, sc,
+		    "%12s : %s", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "DMAE Is",
+		     (sc->dmae_ready ? "Ready" : "Not Ready"));
+	PMD_DRV_LOG(INFO, sc, "%12s : %u", "MTU", sc->mtu);
+	PMD_DRV_LOG(INFO, sc,
+		    "%12s : %s", "PHY Type", get_ext_phy_type(ext_phy_type));
+	PMD_DRV_LOG(INFO, sc, "%12s : %x:%x:%x:%x:%x:%x", "MAC Addr",
+			sc->link_params.mac_addr[0],
+			sc->link_params.mac_addr[1],
+			sc->link_params.mac_addr[2],
+			sc->link_params.mac_addr[3],
+			sc->link_params.mac_addr[4],
+			sc->link_params.mac_addr[5]);
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "RX Mode", get_rx_mode(sc->rx_mode));
+	PMD_DRV_LOG(INFO, sc, "%12s : %s", "State", get_state(sc->state));
+	if (sc->recovery_state)
+		PMD_DRV_LOG(INFO, sc, "%12s : %s", "Recovery",
+			     get_recovery_state(sc->recovery_state));
+	/* Queue info. */
+	if (IS_PF(sc)) {
+		switch (sc->sp->rss_rdata.rss_mode) {
+		case ETH_RSS_MODE_DISABLED:
+			PMD_DRV_LOG(INFO, sc, "%12s : %s", "Queues", "RSS mode - None");
+			break;
+		case ETH_RSS_MODE_REGULAR:
+			PMD_DRV_LOG(INFO, sc, "%12s : %s,", "Queues", "RSS mode - Regular");
+			PMD_DRV_LOG(INFO, sc, "%16d", sc->num_queues);
+			break;
+		default:
+			PMD_DRV_LOG(INFO, sc, "%12s : %s", "Queues", "RSS mode - Unknown");
+			break;
+		}
+	}
+	PMD_DRV_LOG(INFO, sc, "%12s : CQ = %lx,  EQ = %lx", "SPQ Left",
+		     sc->cq_spq_left, sc->eq_spq_left);
+
+	PMD_DRV_LOG(INFO, sc,
+		    "%12s : %x", "Switch", sc->link_params.switch_cfg);
+	PMD_DRV_LOG(INFO, sc, "pcie_bus=%d, pcie_device=%d",
+			sc->pcie_bus, sc->pcie_device);
+	PMD_DRV_LOG(INFO, sc, "bar0.addr=%p, bar1.addr=%p",
+			sc->bar[BAR0].base_addr, sc->bar[BAR1].base_addr);
+	PMD_DRV_LOG(INFO, sc, "port=%d, path=%d, vnic=%d, func=%d",
+			PORT_ID(sc), PATH_ID(sc), VNIC_ID(sc), FUNC_ID(sc));
+}