Adding upstream version 2.5.7.upstream/2.5.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 143 insertions, 0 deletions

diff --git a/doc/sphinx/_build/man/keactrl.8 b/doc/sphinx/_build/man/keactrl.8
new file mode 100644
index 0000000..22a9b3e
--- /dev/null
+++ b/doc/sphinx/_build/man/keactrl.8
@@ -0,0 +1,143 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "KEACTRL" "8" "Mar 22, 2024" "2.5.7" "Kea"
+.SH NAME
+keactrl \- Shell script for managing Kea
+.SH SYNOPSIS
+.sp
+\fBkeactrl\fP [\fBcommand\fP] [\fB\-c\fP keactrl\-config\-file] [\fB\-s\fP server[,server,...]] [\fB\-v\fP]
+.SH DESCRIPTION
+.sp
+\fBkeactrl\fP is a shell script which controls the startup, shutdown, and
+reconfiguration of the Kea servers (\fBkea\-dhcp4\fP, \fBkea\-dhcp6\fP,
+\fBkea\-dhcp\-ddns\fP, \fBkea\-ctrl\-agent\fP, and \fBkea\-netconf\fP). It also
+provides a way to check the current status of the servers and
+determine the configuration files in use.
+.SH CONFIGURATION FILE
+.sp
+Depending on the user\(aqs requirements, not all of the available servers need be run.
+The \fBkeactrl\fP configuration file specifies which servers are enabled and which
+are disabled. By default the configuration file is
+\fB[kea\-install\-dir]/etc/kea/keactrl.conf\fP\&.
+.sp
+See the Kea Administrator Reference Manual for documentation of the
+parameters in the \fBkeactrl\fP configuration file.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fBcommand\fP
+Specifies the command to be issued to the servers. It can be one of the following:
+.INDENT 7.0
+.TP
+.B \fBstart\fP
+Starts the servers.
+.TP
+.B \fBstop\fP
+Stops the servers.
+.TP
+.B \fBreload\fP
+Instructs the servers to re\-read the Kea configuration file. This
+command is not supported by the NETCONF agent.
+.TP
+.B \fBstatus\fP
+Prints the status of the servers.
+.UNINDENT
+.TP
+.B \fB\-c|\-\-ctrl\-config keactrl\-config\-file\fP
+Specifies the \fBkeactrl\fP configuration file. Without this switch,
+\fBkeactrl\fP uses the file
+\fB[kea\-install\-dir]/etc/kea/keactrl.conf\fP\&.
+.TP
+.B \fB\-s|\-\-server server[,server,...]\fP
+Specifies a subset of the enabled servers to which the command should
+be issued. The list of servers should be separated by commas, with no
+intervening spaces. Acceptable values are:
+.INDENT 7.0
+.TP
+.B \fBdhcp4\fP
+DHCPv4 server (\fBkea\-dhcp4\fP).
+.TP
+.B \fBdhcp6\fP
+DHCPv6 server (\fBkea\-dhcp6\fP).
+.TP
+.B \fBdhcp_ddns\fP
+DHCP DDNS server (\fBkea\-dhcp\-ddns\fP).
+.TP
+.B \fBctrl_agent\fP
+Control Agent (\fBkea\-ctrl\-agent\fP).
+.TP
+.B \fBnetconf\fP
+NETCONF agent (\fBkea\-netconf\fP).
+.TP
+.B \fBall\fP
+All servers, including NETCONF if it was configured to be
+built. This is the default.
+.UNINDENT
+.TP
+.B \fB\-v|\-\-version\fP
+Prints the \fBkeactrl\fP version and quits.
+.UNINDENT
+.SH DOCUMENTATION
+.sp
+Kea comes with an extensive Kea Administrator Reference Manual that covers
+all aspects of running the Kea software \- compilation, installation,
+configuration, configuration examples, and much more. Kea also features a
+Kea Messages Manual, which lists all possible messages Kea can print
+with a brief description for each of them. Both documents are
+available in various formats (.txt, .html, .pdf) with the Kea
+distribution. The Kea documentation is available at
+\fI\%https://kea.readthedocs.io\fP\&.
+.sp
+Kea source code is documented in the Kea Developer\(aqs Guide,
+available at \fI\%https://reports.kea.isc.org/dev_guide/\fP\&.
+.sp
+The Kea project website is available at \fI\%https://kea.isc.org\fP\&.
+.SH MAILING LISTS AND SUPPORT
+.sp
+There are two public mailing lists available for the Kea project. \fBkea\-users\fP
+(kea\-users at lists.isc.org) is intended for Kea users, while \fBkea\-dev\fP
+(kea\-dev at lists.isc.org) is intended for Kea developers, prospective
+contributors, and other advanced users. Both lists are available at
+\fI\%https://lists.isc.org\fP\&. The community provides best\-effort support
+on both of those lists.
+.sp
+ISC provides professional support for Kea services. See
+\fI\%https://www.isc.org/kea/\fP for details.
+.SH SEE ALSO
+.sp
+\fBkea\-dhcp4(8)\fP, \fBkea\-dhcp6(8)\fP, \fBkea\-dhcp\-ddns(8)\fP,
+\fBkea\-ctrl\-agent(8)\fP, \fBkea\-admin(8)\fP, \fBkea\-netconf(8)\fP,
+\fBperfdhcp(8)\fP, \fBkea\-lfc(8)\fP, Kea Administrator Reference Manual.
+.SH AUTHOR
+Internet Systems Consortium
+.SH COPYRIGHT
+2019-2024, Internet Systems Consortium
+.\" Generated by docutils manpage writer.
+.