Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 262 insertions, 0 deletions

diff --git a/drivers/amlogic/console/aarch64/meson_console.S b/drivers/amlogic/console/aarch64/meson_console.S
new file mode 100644
index 0000000..d955d83
--- /dev/null
+++ b/drivers/amlogic/console/aarch64/meson_console.S
@@ -0,0 +1,262 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <console_macros.S>
+#include <drivers/amlogic/meson_console.h>
+
+	.globl console_meson_register
+	.globl console_meson_init
+	.globl console_meson_putc
+	.globl console_meson_getc
+	.globl console_meson_flush
+	.globl console_meson_core_putc
+	.globl console_meson_core_getc
+	.globl console_meson_core_flush
+
+	/* -----------------------------------------------
+	 * Hardware definitions
+	 * -----------------------------------------------
+	 */
+#define MESON_WFIFO_OFFSET			0x0
+#define MESON_RFIFO_OFFSET			0x4
+#define MESON_CONTROL_OFFSET			0x8
+#define MESON_STATUS_OFFSET			0xC
+#define MESON_MISC_OFFSET			0x10
+#define MESON_REG5_OFFSET			0x14
+
+#define MESON_CONTROL_CLR_ERROR_BIT		24
+#define MESON_CONTROL_RX_RESET_BIT		23
+#define MESON_CONTROL_TX_RESET_BIT		22
+#define MESON_CONTROL_RX_ENABLE_BIT		13
+#define MESON_CONTROL_TX_ENABLE_BIT		12
+
+#define MESON_STATUS_RX_EMPTY_BIT		20
+#define MESON_STATUS_TX_FULL_BIT		21
+#define MESON_STATUS_TX_EMPTY_BIT		22
+
+#define MESON_REG5_USE_XTAL_CLK_BIT		24
+#define MESON_REG5_USE_NEW_RATE_BIT		23
+#define MESON_REG5_NEW_BAUD_RATE_MASK		0x7FFFFF
+
+	/* -----------------------------------------------
+	 * int console_meson_register(uintptr_t base,
+	 *     uint32_t clk, uint32_t baud,
+	 *     console_t *console);
+	 * Function to initialize and register a new MESON
+	 * console. Storage passed in for the console struct
+	 * *must* be persistent (i.e. not from the stack).
+	 * In: x0 - UART register base address
+	 *     w1 - UART clock in Hz
+	 *     w2 - Baud rate
+	 *     x3 - pointer to empty console_t struct
+	 * Out: return 1 on success, 0 on error
+	 * Clobber list : x0, x1, x2, x6, x7, x14
+	 * -----------------------------------------------
+	 */
+func console_meson_register
+	mov	x7, x30
+	mov	x6, x3
+	cbz	x6, register_fail
+	str	x0, [x6, #CONSOLE_T_BASE]
+
+	bl	console_meson_init
+	cbz	x0, register_fail
+
+	mov	x0, x6
+	mov	x30, x7
+	finish_console_register meson putc=1, getc=ENABLE_CONSOLE_GETC, flush=1
+
+register_fail:
+	ret	x7
+endfunc console_meson_register
+
+	/* -----------------------------------------------
+	 * int console_meson_init(uintptr_t base_addr,
+	 * unsigned int uart_clk, unsigned int baud_rate)
+	 * Function to initialize the console without a
+	 * C Runtime to print debug information. This
+	 * function will be accessed by console_init and
+	 * crash reporting.
+	 * In: x0 - console base address
+	 *     w1 - Uart clock in Hz
+	 *     w2 - Baud rate
+	 * Out: return 1 on success else 0 on error
+	 * Clobber list : x0-x3
+	 * -----------------------------------------------
+	 */
+func console_meson_init
+	cmp	w0, #0
+	beq	init_fail
+	mov_imm	w3, 24000000 /* TODO: This only works with a 24 MHz clock. */
+	cmp	w1, w3
+	bne	init_fail
+	cmp	w2, #0
+	beq	init_fail
+	/* Set baud rate: value = ((clock / 3) / baudrate) - 1 */
+	mov	w3, #3
+	udiv	w3, w1, w3
+	udiv	w3, w3, w2
+	sub	w3, w3, #1
+	orr	w3, w3, #((1 << MESON_REG5_USE_XTAL_CLK_BIT) | \
+			  (1 << MESON_REG5_USE_NEW_RATE_BIT))
+	str	w3, [x0, #MESON_REG5_OFFSET]
+	/* Reset UART and clear error flag */
+	ldr	w3, [x0, #MESON_CONTROL_OFFSET]
+	orr	w3, w3, #((1 << MESON_CONTROL_CLR_ERROR_BIT) | \
+			  (1 << MESON_CONTROL_RX_RESET_BIT) | \
+			  (1 << MESON_CONTROL_TX_RESET_BIT))
+	str	w3, [x0, #MESON_CONTROL_OFFSET]
+	bic	w3, w3, #((1 << MESON_CONTROL_CLR_ERROR_BIT) | \
+			  (1 << MESON_CONTROL_RX_RESET_BIT) | \
+			  (1 << MESON_CONTROL_TX_RESET_BIT))
+	str	w3, [x0, #MESON_CONTROL_OFFSET]
+	/* Enable transfer and receive FIFO */
+	orr	w3, w3, #((1 << MESON_CONTROL_RX_ENABLE_BIT) | \
+			  (1 << MESON_CONTROL_TX_ENABLE_BIT))
+	str	w3, [x0, #MESON_CONTROL_OFFSET]
+	/* Success */
+	mov	w0, #1
+	ret
+init_fail:
+	mov	w0, wzr
+	ret
+endfunc console_meson_init
+
+	/* --------------------------------------------------------
+	 * int console_meson_putc(int c, console_t *console)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - pointer to console_t structure
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_meson_putc
+#if ENABLE_ASSERTIONS
+	cmp	x1, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x1, [x1, #CONSOLE_T_BASE]
+	b	console_meson_core_putc
+endfunc console_meson_putc
+
+	/* --------------------------------------------------------
+	 * int console_meson_core_putc(int c, uintptr_t base_addr)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - console base address
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_meson_core_putc
+#if ENABLE_ASSERTIONS
+	cmp	x1, #0
+	ASM_ASSERT(ne)
+#endif
+	/* Prepend '\r' to '\n' */
+	cmp	w0, #0xA
+	b.ne	2f
+	/* Wait until the transmit FIFO isn't full */
+1:	ldr	w2, [x1, #MESON_STATUS_OFFSET]
+	tbnz	w2, #MESON_STATUS_TX_FULL_BIT, 1b
+	/* Write '\r' if needed */
+	mov	w2, #0xD
+	str	w2, [x1, #MESON_WFIFO_OFFSET]
+	/* Wait until the transmit FIFO isn't full */
+2:	ldr	w2, [x1, #MESON_STATUS_OFFSET]
+	tbnz	w2, #MESON_STATUS_TX_FULL_BIT, 2b
+	/* Write input character */
+	str	w0, [x1, #MESON_WFIFO_OFFSET]
+	ret
+endfunc console_meson_core_putc
+
+	/* ---------------------------------------------
+	 * int console_meson_getc(console_t *console)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 if no character is available.
+	 * In : x0 - pointer to console_t structure
+	 * Out: w0 - character if available, else -1
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_meson_getc
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x0, [x0, #CONSOLE_T_BASE]
+	b	console_meson_core_getc
+endfunc console_meson_getc
+
+	/* ---------------------------------------------
+	 * int console_meson_core_getc(uintptr_t base_addr)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 if no character is available.
+	 * In : x0 - console base address
+	 * Out: w0 - character if available, else -1
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_meson_core_getc
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif
+	/* Is the receive FIFO empty? */
+	ldr	w1, [x0, #MESON_STATUS_OFFSET]
+	tbnz	w1, #MESON_STATUS_RX_EMPTY_BIT, 1f
+	/* Read one character from the RX FIFO */
+	ldr	w0, [x0, #MESON_RFIFO_OFFSET]
+	ret
+1:
+	mov	w0, #ERROR_NO_PENDING_CHAR
+	ret
+endfunc console_meson_core_getc
+
+	/* ---------------------------------------------
+	 * void console_meson_flush(console_t *console)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - pointer to console_t structure
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_meson_flush
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x0, [x0, #CONSOLE_T_BASE]
+	b	console_meson_core_flush
+endfunc console_meson_flush
+
+	/* ---------------------------------------------
+	 * void console_meson_core_flush(uintptr_t base_addr)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - console base address
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_meson_core_flush
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif
+	/* Wait until the transmit FIFO is empty */
+1:	ldr	w1, [x0, #MESON_STATUS_OFFSET]
+	tbz	w1, #MESON_STATUS_TX_EMPTY_BIT, 1b
+	ret
+endfunc console_meson_core_flush