Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 314 insertions, 0 deletions

diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
new file mode 100644
index 0000000..3e8109e
--- /dev/null
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <platform_def.h>
+
+#include <arch_features.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/partition/partition.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+#include <lib/gpt_rme/gpt_rme.h>
+#ifdef SPD_opteed
+#include <lib/optee_utils.h>
+#endif
+#include <lib/utils.h>
+#if ENABLE_RME
+#include <plat/arm/common/arm_pas_def.h>
+#endif
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Base address of fw_config received from BL1 */
+static uintptr_t config_base;
+
+/*
+ * Check that BL2_BASE is above ARM_FW_CONFIG_LIMIT. This reserved page is
+ * for `meminfo_t` data structure and fw_configs passed from BL1.
+ */
+CASSERT(BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl2_base_overflows);
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak bl2_early_platform_setup2
+#pragma weak bl2_platform_setup
+#pragma weak bl2_plat_arch_setup
+#pragma weak bl2_plat_sec_mem_layout
+
+#if ENABLE_RME
+#define MAP_BL2_TOTAL		MAP_REGION_FLAT(			\
+					bl2_tzram_layout.total_base,	\
+					bl2_tzram_layout.total_size,	\
+					MT_MEMORY | MT_RW | MT_ROOT)
+#else
+#define MAP_BL2_TOTAL		MAP_REGION_FLAT(			\
+					bl2_tzram_layout.total_base,	\
+					bl2_tzram_layout.total_size,	\
+					MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* ENABLE_RME */
+
+#pragma weak arm_bl2_plat_handle_post_image_load
+
+/*******************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
+ * in x0. This memory layout is sitting at the base of the free trusted SRAM.
+ * Copy it to a safe location before its reclaimed by later BL2 functionality.
+ ******************************************************************************/
+void arm_bl2_early_platform_setup(uintptr_t fw_config,
+				  struct meminfo *mem_layout)
+{
+	int __maybe_unused ret;
+
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	config_base = fw_config;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_arm_io_setup();
+
+	/* Load partition table */
+#if ARM_GPT_SUPPORT
+	ret = gpt_partition_init();
+	if (ret != 0) {
+		ERROR("GPT partition initialisation failed!\n");
+		panic();
+	}
+
+#endif /* ARM_GPT_SUPPORT */
+}
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
+{
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+
+	generic_delay_timer_init();
+}
+
+/*
+ * Perform  BL2 preload setup. Currently we initialise the dynamic
+ * configuration here.
+ */
+void bl2_plat_preload_setup(void)
+{
+	arm_bl2_dyn_cfg_init();
+
+#if ARM_GPT_SUPPORT && !PSA_FWU_SUPPORT
+	/* Always use the FIP from bank 0 */
+	arm_set_fip_addr(0U);
+#endif /* ARM_GPT_SUPPORT && !PSA_FWU_SUPPORT */
+}
+
+/*
+ * Perform ARM standard platform setup.
+ */
+void arm_bl2_platform_setup(void)
+{
+#if !ENABLE_RME
+	/* Initialize the secure environment */
+	plat_arm_security_setup();
+#endif
+
+#if defined(PLAT_ARM_MEM_PROT_ADDR)
+	arm_nor_psci_do_static_mem_protect();
+#endif
+}
+
+void bl2_platform_setup(void)
+{
+	arm_bl2_platform_setup();
+}
+
+#if ENABLE_RME
+static void arm_bl2_plat_gpt_setup(void)
+{
+	/*
+	 * The GPT library might modify the gpt regions structure to optimize
+	 * the layout, so the array cannot be constant.
+	 */
+	pas_region_t pas_regions[] = {
+		ARM_PAS_KERNEL,
+		ARM_PAS_SECURE,
+		ARM_PAS_REALM,
+		ARM_PAS_EL3_DRAM,
+		ARM_PAS_GPTS,
+		ARM_PAS_KERNEL_1
+	};
+
+	/* Initialize entire protected space to GPT_GPI_ANY. */
+	if (gpt_init_l0_tables(GPCCR_PPS_64GB, ARM_L0_GPT_ADDR_BASE,
+		ARM_L0_GPT_SIZE) < 0) {
+		ERROR("gpt_init_l0_tables() failed!\n");
+		panic();
+	}
+
+	/* Carve out defined PAS ranges. */
+	if (gpt_init_pas_l1_tables(GPCCR_PGS_4K,
+				   ARM_L1_GPT_ADDR_BASE,
+				   ARM_L1_GPT_SIZE,
+				   pas_regions,
+				   (unsigned int)(sizeof(pas_regions) /
+				   sizeof(pas_region_t))) < 0) {
+		ERROR("gpt_init_pas_l1_tables() failed!\n");
+		panic();
+	}
+
+	INFO("Enabling Granule Protection Checks\n");
+	if (gpt_enable() < 0) {
+		ERROR("gpt_enable() failed!\n");
+		panic();
+	}
+}
+#endif /* ENABLE_RME */
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here.
+ * When RME is enabled the secure environment is initialised before
+ * initialising and enabling Granule Protection.
+ * This function initialises the MMU in a quick and dirty way.
+ ******************************************************************************/
+void arm_bl2_plat_arch_setup(void)
+{
+#if USE_COHERENT_MEM
+	/* Ensure ARM platforms don't use coherent memory in BL2. */
+	assert((BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE) == 0U);
+#endif
+
+	const mmap_region_t bl_regions[] = {
+		MAP_BL2_TOTAL,
+		ARM_MAP_BL_RO,
+#if USE_ROMLIB
+		ARM_MAP_ROMLIB_CODE,
+		ARM_MAP_ROMLIB_DATA,
+#endif
+		ARM_MAP_BL_CONFIG_REGION,
+#if ENABLE_RME
+		ARM_MAP_L0_GPT_REGION,
+#endif
+		{0}
+	};
+
+#if ENABLE_RME
+	/* Initialise the secure environment */
+	plat_arm_security_setup();
+#endif
+	setup_page_tables(bl_regions, plat_arm_get_mmap());
+
+#ifdef __aarch64__
+#if ENABLE_RME
+	/* BL2 runs in EL3 when RME enabled. */
+	assert(get_armv9_2_feat_rme_support() != 0U);
+	enable_mmu_el3(0);
+
+	/* Initialise and enable granule protection after MMU. */
+	arm_bl2_plat_gpt_setup();
+#else
+	enable_mmu_el1(0);
+#endif
+#else
+	enable_mmu_svc_mon(0);
+#endif
+
+	arm_setup_romlib();
+}
+
+void bl2_plat_arch_setup(void)
+{
+	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
+
+	arm_bl2_plat_arch_setup();
+
+	/* Fill the properties struct with the info from the config dtb */
+	fconf_populate("FW_CONFIG", config_base);
+
+	/* TB_FW_CONFIG was also loaded by BL1 */
+	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
+	assert(tb_fw_config_info != NULL);
+
+	fconf_populate("TB_FW", tb_fw_config_info->config_addr);
+}
+
+int arm_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+#ifdef SPD_opteed
+	bl_mem_params_node_t *pager_mem_params = NULL;
+	bl_mem_params_node_t *paged_mem_params = NULL;
+#endif
+	assert(bl_mem_params != NULL);
+
+	switch (image_id) {
+#ifdef __aarch64__
+	case BL32_IMAGE_ID:
+#ifdef SPD_opteed
+		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+		assert(pager_mem_params);
+
+		paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+		assert(paged_mem_params);
+
+		err = parse_optee_header(&bl_mem_params->ep_info,
+				&pager_mem_params->image_info,
+				&paged_mem_params->image_info);
+		if (err != 0) {
+			WARN("OPTEE header parse error.\n");
+		}
+#endif
+		bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl32_entry();
+		break;
+#endif
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl33_entry();
+		break;
+
+#ifdef SCP_BL2_BASE
+	case SCP_BL2_IMAGE_ID:
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		err = plat_arm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+		if (err) {
+			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+		}
+		break;
+#endif
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int arm_bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+#if defined(SPD_spmd) && BL2_ENABLE_SP_LOAD
+	/* For Secure Partitions we don't need post processing */
+	if ((image_id >= (MAX_NUMBER_IDS - MAX_SP_IDS)) &&
+		(image_id < MAX_NUMBER_IDS)) {
+		return 0;
+	}
+#endif
+	return arm_bl2_handle_post_image_load(image_id);
+}