Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 243 insertions, 0 deletions

diff --git a/plat/arm/common/arm_common.c b/plat/arm/common/arm_common.c
new file mode 100644
index 0000000..fc68114
--- /dev/null
+++ b/plat/arm/common/arm_common.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <common/romlib.h>
+#include <lib/mmio.h>
+#include <lib/smccc.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <services/arm_arch_svc.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak plat_get_ns_image_entrypoint
+#pragma weak plat_arm_get_mmap
+
+/* Conditionally provide a weak definition of plat_get_syscnt_freq2 to avoid
+ * conflicts with the definition in plat/common. */
+#pragma weak plat_get_syscnt_freq2
+
+/* Get ARM SOC-ID */
+#pragma weak plat_arm_get_soc_id
+
+/*******************************************************************************
+ * Changes the memory attributes for the region of mapped memory where the BL
+ * image's translation tables are located such that the tables will have
+ * read-only permissions.
+ ******************************************************************************/
+#if PLAT_RO_XLAT_TABLES
+void arm_xlat_make_tables_readonly(void)
+{
+	int rc = xlat_make_tables_readonly();
+
+	if (rc != 0) {
+		ERROR("Failed to make translation tables read-only at EL%u.\n",
+		      get_current_el());
+		panic();
+	}
+
+	INFO("Translation tables are now read-only at EL%u.\n",
+	     get_current_el());
+}
+#endif
+
+void arm_setup_romlib(void)
+{
+#if USE_ROMLIB
+	if (!rom_lib_init(ROMLIB_VERSION))
+		panic();
+#endif
+}
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return PLAT_ARM_NS_IMAGE_BASE;
+#endif
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t arm_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+#ifdef __aarch64__
+uint32_t arm_get_spsr_for_bl33_entry(void)
+{
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	mode = (el_implemented(2) != EL_IMPL_NONE) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64((uint64_t)mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+#else
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+uint32_t arm_get_spsr_for_bl33_entry(void)
+{
+	unsigned int hyp_status, mode, spsr;
+
+	hyp_status = GET_VIRT_EXT(read_id_pfr1());
+
+	mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
+			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+#endif /* __aarch64__ */
+
+/*******************************************************************************
+ * Configures access to the system counter timer module.
+ ******************************************************************************/
+#ifdef ARM_SYS_TIMCTL_BASE
+void arm_configure_sys_timer(void)
+{
+	unsigned int reg_val;
+
+	/* Read the frequency of the system counter */
+	unsigned int freq_val = plat_get_syscnt_freq2();
+
+#if ARM_CONFIG_CNTACR
+	reg_val = (1U << CNTACR_RPCT_SHIFT) | (1U << CNTACR_RVCT_SHIFT);
+	reg_val |= (1U << CNTACR_RFRQ_SHIFT) | (1U << CNTACR_RVOFF_SHIFT);
+	reg_val |= (1U << CNTACR_RWVT_SHIFT) | (1U << CNTACR_RWPT_SHIFT);
+	mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTACR_BASE(PLAT_ARM_NSTIMER_FRAME_ID), reg_val);
+#endif /* ARM_CONFIG_CNTACR */
+
+	reg_val = (1U << CNTNSAR_NS_SHIFT(PLAT_ARM_NSTIMER_FRAME_ID));
+	mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTNSAR, reg_val);
+
+	/*
+	 * Initialize CNTFRQ register in CNTCTLBase frame. The CNTFRQ
+	 * system register initialized during psci_arch_setup() is different
+	 * from this and has to be updated independently.
+	 */
+	mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTCTLBASE_CNTFRQ, freq_val);
+
+#if defined(PLAT_juno) || defined(PLAT_n1sdp) || defined(PLAT_morello)
+	/*
+	 * Initialize CNTFRQ register in Non-secure CNTBase frame.
+	 * This is required for Juno, N1SDP and Morello because they do not
+	 * follow ARM ARM in that the value updated in CNTFRQ is not
+	 * reflected in CNTBASEN_CNTFRQ. Hence update the value manually.
+	 */
+	mmio_write_32(ARM_SYS_CNT_BASE_NS + CNTBASEN_CNTFRQ, freq_val);
+#endif
+}
+#endif /* ARM_SYS_TIMCTL_BASE */
+
+/*******************************************************************************
+ * Returns ARM platform specific memory map regions.
+ ******************************************************************************/
+const mmap_region_t *plat_arm_get_mmap(void)
+{
+	return plat_arm_mmap;
+}
+
+#ifdef ARM_SYS_CNTCTL_BASE
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+
+	/* Read the frequency from Frequency modes table */
+	counter_base_frequency = mmio_read_32(ARM_SYS_CNTCTL_BASE + CNTFID_OFF);
+
+	/* The first entry of the frequency modes table must not be 0 */
+	if (counter_base_frequency == 0U)
+		panic();
+
+	return counter_base_frequency;
+}
+
+#endif /* ARM_SYS_CNTCTL_BASE */
+
+#if SDEI_SUPPORT
+/*
+ * Translate SDEI entry point to PA, and perform standard ARM entry point
+ * validation on it.
+ */
+int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode)
+{
+	uint64_t par, pa;
+	u_register_t scr_el3;
+
+	/* Doing Non-secure address translation requires SCR_EL3.NS set */
+	scr_el3 = read_scr_el3();
+	write_scr_el3(scr_el3 | SCR_NS_BIT);
+	isb();
+
+	assert((client_mode == MODE_EL2) || (client_mode == MODE_EL1));
+	if (client_mode == MODE_EL2) {
+		/*
+		 * Translate entry point to Physical Address using the EL2
+		 * translation regime.
+		 */
+		ats1e2r(ep);
+	} else {
+		/*
+		 * Translate entry point to Physical Address using the EL1&0
+		 * translation regime, including stage 2.
+		 */
+		AT(ats12e1r, ep);
+	}
+	isb();
+	par = read_par_el1();
+
+	/* Restore original SCRL_EL3 */
+	write_scr_el3(scr_el3);
+	isb();
+
+	/* If the translation resulted in fault, return failure */
+	if ((par & PAR_F_MASK) != 0)
+		return -1;
+
+	/* Extract Physical Address from PAR */
+	pa = (par & (PAR_ADDR_MASK << PAR_ADDR_SHIFT));
+
+	/* Perform NS entry point validation on the physical address */
+	return arm_validate_ns_entrypoint(pa);
+}
+#endif
+
+const mmap_region_t *plat_get_addr_mmap(void)
+{
+	return plat_arm_mmap;
+}