Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 1678 insertions, 0 deletions

diff --git a/plat/nuvoton/common/nuvoton_helpers.S b/plat/nuvoton/common/nuvoton_helpers.S
new file mode 100644
index 0000000..09035a1
--- /dev/null
+++ b/plat/nuvoton/common/nuvoton_helpers.S
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef NUVOTON_HELPERS_S
+#define NUVOTON_HELPERS_S
+
+#include <asm_macros.S>
+#include <cortex_a35.h>
+#include <platform_def.h>
+
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_my_core_pos
+	.globl	plat_calc_core_pos
+	.globl	plat_reset_handler
+	.globl	plat_get_my_entrypoint
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl	plat_crash_console_flush
+	.globl	platform_mem_init
+	.globl  npcm845x_mailbox_init
+
+	/* --------------------------------------------------------------------
+	 * Helper macro that reads the part number of the current CPU and jumps
+	 * to the given label if it matches the CPU MIDR provided.
+	 *
+	 * Clobbers x0.
+	 * --------------------------------------------------------------------
+	 */
+	.macro  jump_if_cpu_midr _cpu_midr, _label
+
+	mrs	x0, midr_el1
+	ubfx	x0, x0, MIDR_PN_SHIFT, #12
+	cmp     w0, #((\_cpu_midr >> MIDR_PN_SHIFT) & MIDR_PN_MASK)
+	b.eq	\_label
+
+	.endm
+
+	/* ----------------------------------------------
+	 * The mailbox_base is used to distinguish warm/cold
+	 * reset. The mailbox_base is in the data section, not
+	 * in .bss, this allows function to start using this
+	 * variable before the runtime memory is initialized.
+	 * ----------------------------------------------
+	 */
+	.section .data.mailbox_base
+	.align 3
+	mailbox_base: .quad 0x0
+
+	/* ---------------------------------------------
+	 * void plat_reset_handler(void);
+	 *
+	 * To add: Determine the SoC type and call the appropriate
+	 * reset handler.
+	 *-----------------------------------------------	 */
+
+func plat_reset_handler
+	 ret
+endfunc plat_reset_handler
+
+	/* ----------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary(void);
+	 * This function checks if this is the primary CPU
+	 * ----------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CPU_MASK)
+	cmp	x0, #PLAT_PRIMARY_CPU
+	cset	x0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+	/* ----------------------------------------------
+	 * unsigned int plat_my_core_pos(void)
+	 * This Function uses the plat_calc_core_pos()
+	 * to get the index of the calling CPU.
+	 * ----------------------------------------------
+	 */
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	and	x1, x0, #MPIDR_CPU_MASK
+	and 	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #6
+	ret
+endfunc plat_my_core_pos
+
+	/*
+	 * unsigned int plat_calc_core_pos(uint64_t mpidr)
+	 * helper function to calculate the core position.
+	 * With this function.
+	 */
+func plat_calc_core_pos
+	and	x1, x0, #MPIDR_CPU_MASK
+	and 	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #6
+	ret
+endfunc plat_calc_core_pos
+
+	/* ---------------------------------------------
+	 * function to get the entrypoint.
+	 * ---------------------------------------------
+	 */
+	/* ---------------------------------------------------------------------
+	 * uintptr_t plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and a warm
+	 * boot.
+	 *
+	 * This functions returns:
+	 *  - 0 for a cold boot.
+	 *  - Any other value for a warm boot.
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	mov	x1, x30
+	bl	plat_is_my_cpu_primary
+	/*
+	 * Secondaries always cold boot.
+	*/
+	cbz	w0, 1f
+	/*
+	 * Primaries warm boot if they are requested
+	 * to power off.
+	 */
+	mov_imm	x0, PLAT_NPCM_TM_HOLD_BASE
+	ldr	x0, [x0]
+	cmp	x0, PLAT_NPCM_TM_HOLD_STATE_BSP_OFF
+	adr	x0, plat_wait_for_warm_boot
+	csel	x0, x0, xzr, eq
+	ret	x1
+1:	mov	x0, #0
+	ret	x1
+endfunc plat_get_my_entrypoint
+
+func npcm845x_mailbox_init
+	adrp	x1, mailbox_base
+	str	x0, [x1, :lo12:mailbox_base]
+	ret
+endfunc npcm845x_mailbox_init
+
+func plat_wait_for_warm_boot
+	/*
+	 * Calculate address of our hold entry.
+	 * As the function will never return, there is no need to save LR.
+	 */
+	bl	plat_my_core_pos
+	lsl	x0, x0, #3
+	mov x8, x0
+	mov_imm	x2, PLAT_NPCM_TM_HOLD_BASE
+	add	x0, x0, x2
+	mov_imm	x2, PLAT_NPCM_TRUSTED_NOTIFICATION_BASE
+	add	x8, x8, x2
+	/*
+	 * This code runs way before requesting the warmboot of this core,
+	 * so it is possible to clear the mailbox before getting a request
+	 * to boot.
+	 */
+	mov	x1, PLAT_NPCM_TM_HOLD_STATE_WAIT
+	str	x1,[x0]
+
+	/* Notify that core is in pending state - do not use x0!, uses x7 and x8! */
+	mov	x7, PLAT_NPCM_TM_NOTIFICATION_START
+	str	x7,[x8]
+	/*
+	 * This code runs way before requesting the warmboot of this core,
+	 * so it is possible to clear the mailbox before getting a request
+	 * to boot.
+	 */
+	mov	x1, PLAT_NPCM_TM_HOLD_STATE_WAIT
+	str	x1,[x0]
+	/* Wait until we have a go */
+poll_mailbox:
+	wfe
+	ldr	x1, [x0]
+	cmp	x1, PLAT_NPCM_TM_HOLD_STATE_GO
+	bne	poll_mailbox
+
+	mov	x7, PLAT_NPCM_TM_NOTIFICATION_BR
+	str	x7,[x8]
+	/* Jump to the provided entrypoint */
+	mov_imm	x0, PLAT_NPCM_TM_ENTRYPOINT
+	ldr	x1, [x0]
+	br	x1
+endfunc plat_wait_for_warm_boot
+
+func plat_secondary_cold_boot_setup
+	b	plat_wait_for_warm_boot
+endfunc plat_secondary_cold_boot_setup
+
+func plat_crash_console_init
+	mov	x0, #1
+	ret
+endfunc plat_crash_console_init
+
+func plat_crash_console_putc
+	ret
+endfunc plat_crash_console_putc
+
+func plat_crash_console_flush
+	mov	x0, #0
+	ret
+endfunc plat_crash_console_flush
+
+func platform_mem_init
+	ret
+endfunc platform_mem_init
+
+#endif /* NUVOTON_HELPERS_S */
diff --git a/plat/nuvoton/common/nuvoton_pm.c b/plat/nuvoton/common/nuvoton_pm.c
new file mode 100644
index 0000000..833ebfb
--- /dev/null
+++ b/plat/nuvoton/common/nuvoton_pm.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <lib/psci/psci.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+
+/* Allow npcm845x to override these functions */
+#pragma weak plat_arm_program_trusted_mailbox
+#pragma weak plat_setup_psci_ops /* changed to weak */
+
+
+/*******************************************************************************
+ * ARM standard platform handler called to check the validity of the non secure
+ * entrypoint. Returns 0 if the entrypoint is valid, or -1 otherwise.
+ ******************************************************************************/
+int arm_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+	/*
+	 * Check if the non secure entrypoint lies within the non
+	 * secure DRAM.
+	 */
+	if ((entrypoint >= ARM_NS_DRAM1_BASE) &&
+		(entrypoint < (ARM_NS_DRAM1_BASE + ARM_NS_DRAM1_SIZE))) {
+		return 0;
+	}
+#ifdef __aarch64__
+	if ((entrypoint >= ARM_DRAM2_BASE) &&
+		(entrypoint < (ARM_DRAM2_BASE + ARM_DRAM2_SIZE))) {
+		return 0;
+	}
+#endif
+
+	return -1;
+}
+
+int arm_validate_psci_entrypoint(uintptr_t entrypoint)
+{
+	return (arm_validate_ns_entrypoint(entrypoint) == 0) ? PSCI_E_SUCCESS :
+		PSCI_E_INVALID_ADDRESS;
+}
+
+/******************************************************************************
+ * Helper function to save the platform state before a system suspend. Save the
+ * state of the system components which are not in the Always ON power domain.
+ *****************************************************************************/
+void arm_system_pwr_domain_save(void)
+{
+	/* Assert system power domain is available on the platform */
+	assert(PLAT_MAX_PWR_LVL > ARM_PWR_LVL1);
+
+	plat_arm_gic_save();
+
+	/*
+	 * Unregister console now so that it is not registered for a second
+	 * time during resume.
+	 */
+	arm_console_runtime_end();
+
+	/*
+	 * All the other peripheral which are configured by TF-A are
+	 * re-initialized on resume from system suspend. Hence we
+	 * don't save their state here.
+	 */
+}
diff --git a/plat/nuvoton/common/nuvoton_topology.c b/plat/nuvoton/common/nuvoton_topology.c
new file mode 100644
index 0000000..892d9e2
--- /dev/null
+++ b/plat/nuvoton/common/nuvoton_topology.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/psci/psci.h>
+#include <lib/semihosting.h>
+#include <plat/common/platform.h>
+
+/*
+ * Since NPCM845 have only powered/non-powered state,
+ * the tree is structure of level 0
+ * (Single cluster == 0) and 4 representing a "leaf" for every CPU
+ */
+const unsigned char npcm845x_power_domain_tree_desc[] = {
+	PLATFORM_CLUSTER_COUNT,
+	PLATFORM_MAX_CPU_PER_CLUSTER
+};
+
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	/* A single cluster with 4 CPUs */
+	return npcm845x_power_domain_tree_desc;
+}
+
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster_id, cpu_id;
+
+	mpidr &= MPIDR_AFFINITY_MASK;
+
+	if (mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)) {
+		return -1;
+	}
+
+	cluster_id = (unsigned int)MPIDR_AFFLVL1_VAL(mpidr);
+	cpu_id = (unsigned int)MPIDR_AFFLVL0_VAL(mpidr);
+
+	if (cluster_id > PLATFORM_CLUSTER_COUNT ||
+		cpu_id > PLATFORM_MAX_CPU_PER_CLUSTER) {
+		return -1;
+	}
+
+	return (int)(cpu_id + (cluster_id * 4));
+}
diff --git a/plat/nuvoton/common/plat_nuvoton_gic.c b/plat/nuvoton/common/plat_nuvoton_gic.c
new file mode 100644
index 0000000..300670d
--- /dev/null
+++ b/plat/nuvoton/common/plat_nuvoton_gic.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2016-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv2.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+static const interrupt_prop_t g0_interrupt_props[] = {
+	INTR_PROP_DESC(FIQ_SMP_CALL_SGI, GIC_HIGHEST_SEC_PRIORITY,
+			GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+};
+
+gicv2_driver_data_t arm_gic_data = {
+	.gicd_base = BASE_GICD_BASE,
+	.gicc_base = BASE_GICC_BASE,
+	.interrupt_props = g0_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(g0_interrupt_props),
+};
+
+void plat_gic_driver_init(void)
+{
+	gicv2_driver_init(&arm_gic_data);
+}
+
+void plat_gic_init(void)
+{
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+void plat_gic_cpuif_enable(void)
+{
+	gicv2_cpuif_enable();
+}
+
+void plat_gic_cpuif_disable(void)
+{
+	gicv2_cpuif_disable();
+}
+
+void plat_gic_pcpu_init(void)
+{
+	gicv2_pcpu_distif_init();
+}
diff --git a/plat/nuvoton/npcm845x/npcm845x_bl31_setup.c b/plat/nuvoton/npcm845x/npcm845x_bl31_setup.c
new file mode 100644
index 0000000..08448db
--- /dev/null
+++ b/plat/nuvoton/npcm845x/npcm845x_bl31_setup.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2017-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/ti/uart/uart_16550.h>
+#include <lib/debugfs.h>
+#include <lib/extensions/ras.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <npcm845x_clock.h>
+#include <npcm845x_gcr.h>
+#include <npcm845x_lpuart.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <plat_npcm845x.h>
+#include <platform_def.h>
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+#if !RESET_TO_BL31
+/*
+ * Check that BL31_BASE is above ARM_FW_CONFIG_LIMIT. The reserved page
+ * is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2.
+ */
+/* CASSERT(BL31_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl31_base_overflows); */
+#endif /* !RESET_TO_BL31 */
+
+#define MAP_BL31_TOTAL		MAP_REGION_FLAT( \
+					BL31_START, \
+					BL31_END - BL31_START, \
+					MT_MEMORY | MT_RW | EL3_PAS)
+
+#if SEPARATE_NOBITS_REGION
+#define MAP_BL31_NOBITS		MAP_REGION_FLAT( \
+					BL31_NOBITS_BASE, \
+					BL31_NOBITS_LIMIT - \
+					BL31_NOBITS_BASE, \
+					MT_MEMORY | MT_RW | EL3_PAS)
+#endif /* SEPARATE_NOBITS_REGION */
+
+/******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image
+ * for the security state specified. BL33 corresponds to the non-secure
+ * image type while BL32 corresponds to the secure image type.
+ * A NULL pointer is returned if the image does not exist.
+ *****************************************************************************/
+struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type));
+	next_image_info = (type == NON_SECURE)
+			? &bl33_image_ep_info : &bl32_image_ep_info;
+/*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+	if (next_image_info->pc) {
+		return next_image_info;
+	} else {
+		return NULL;
+	}
+}
+
+int board_uart_init(void)
+{
+	unsigned long UART_BASE_ADDR;
+	static console_t console;
+
+#ifdef CONFIG_TARGET_ARBEL_PALLADIUM
+	UART_Init(UART0_DEV, UART_MUX_MODE1,
+				UART_BAUDRATE_115200);
+	UART_BASE_ADDR = npcm845x_get_base_uart(UART0_DEV);
+#else
+	UART_BASE_ADDR = npcm845x_get_base_uart(UART0_DEV);
+#endif /* CONFIG_TARGET_ARBEL_PALLADIUM */
+
+/*
+ * Register UART w/o initialization -
+ * A clock rate of zero means to skip the initialisation.
+ */
+	console_16550_register((uintptr_t)UART_BASE_ADDR, 0, 0, &console);
+
+	return 0;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return (unsigned int)COUNTER_FREQUENCY;
+}
+
+/******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory,
+ * so  we are guaranteed to pick up good data.
+ *****************************************************************************/
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
+{
+#if RESET_TO_BL31
+	void *from_bl2 = (void *)arg0;
+	void *plat_params_from_bl2 = (void *)arg3;
+
+	if (from_bl2 != NULL) {
+		assert(from_bl2 == NULL);
+	}
+
+	if (plat_params_from_bl2 != NULL) {
+		assert(plat_params_from_bl2 == NULL);
+	}
+#endif /* RESET_TO_BL31 */
+
+/* Initialize Delay timer */
+	 generic_delay_timer_init();
+
+/* Do Specific Board/Chip initializations */
+	board_uart_init();
+
+#if RESET_TO_BL31
+	/* There are no parameters from BL2 if BL31 is a reset vector */
+	assert(from_bl2 == NULL);
+	assert(plat_params_from_bl2 == NULL);
+
+#ifdef BL32_BASE
+	/* Populate entry point information for BL32 */
+	SET_PARAM_HEAD(&bl32_image_ep_info,
+					PARAM_EP,
+					VERSION_1,
+					0);
+	SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+	bl32_image_ep_info.pc = BL32_BASE;
+	bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry();
+
+#if defined(SPD_spmd)
+/*
+ * SPM (hafnium in secure world) expects SPM Core manifest base address
+ * in x0, which in !RESET_TO_BL31 case loaded after base of non shared
+ * SRAM(after 4KB offset of SRAM). But in RESET_TO_BL31 case all non
+ * shared SRAM is allocated to BL31, so to avoid overwriting of manifest
+ * keep it in the last page.
+ */
+	bl32_image_ep_info.args.arg0 = ARM_TRUSTED_SRAM_BASE +
+					PLAT_ARM_TRUSTED_SRAM_SIZE - PAGE_SIZE;
+#endif /* SPD_spmd */
+#endif /* BL32_BASE */
+
+/* Populate entry point information for BL33 */
+		SET_PARAM_HEAD(&bl33_image_ep_info,
+					PARAM_EP,
+					VERSION_1,
+					0);
+
+/*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+		bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+		/* Generic ARM code will switch to EL2, revert to EL1 */
+		bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry();
+		bl33_image_ep_info.spsr &= ~0x8;
+		bl33_image_ep_info.spsr |= 0x4;
+
+		SET_SECURITY_STATE(bl33_image_ep_info.h.attr, (uint32_t)NON_SECURE);
+
+#if defined(SPD_spmd) && !(ARM_LINUX_KERNEL_AS_BL33)
+/*
+ * Hafnium in normal world expects its manifest address in x0,
+ * which is loaded at base of DRAM.
+ */
+		bl33_image_ep_info.args.arg0 = (u_register_t)ARM_DRAM1_BASE;
+#endif /* SPD_spmd && !ARM_LINUX_KERNEL_AS_BL33 */
+
+#if ARM_LINUX_KERNEL_AS_BL33
+/*
+ * According to the file ``Documentation/arm64/booting.txt`` of the
+ * Linux kernel tree, Linux expects the physical address of the device
+ * tree blob (DTB) in x0, while x1-x3 are reserved for future use and
+ * must be 0.
+ */
+	bl33_image_ep_info.args.arg0 = (u_register_t)ARM_PRELOADED_DTB_BASE;
+	bl33_image_ep_info.args.arg1 = 0U;
+	bl33_image_ep_info.args.arg2 = 0U;
+	bl33_image_ep_info.args.arg3 = 0U;
+#endif /* ARM_LINUX_KERNEL_AS_BL33 */
+
+#else /* RESET_TO_BL31 */
+/*
+ * In debug builds, we pass a special value in 'plat_params_from_bl2'
+ * to verify platform parameters from BL2 to BL31.
+ * In release builds, it's not used.
+ */
+	assert(((unsigned long long)plat_params_from_bl2) ==
+			ARM_BL31_PLAT_PARAM_VAL);
+
+/*
+ * Check params passed from BL2 should not be NULL,
+ */
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+	assert(params_from_bl2 != NULL);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+/*
+ * Copy BL33 and BL32 (if present), entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+	while (bl_params != NULL) {
+		if (bl_params->image_id == BL32_IMAGE_ID) {
+			bl32_image_ep_info = *bl_params->ep_info;
+		}
+
+		if (bl_params->image_id == BL33_IMAGE_ID) {
+			bl33_image_ep_info = *bl_params->ep_info;
+		}
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (bl33_image_ep_info.pc == 0U) {
+		panic();
+	}
+#endif /* RESET_TO_BL31 */
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ ******************************************************************************/
+void bl31_platform_setup(void)
+{
+/* Initialize the GIC driver, cpu and distributor interfaces */
+	plat_gic_driver_init();
+	plat_gic_init();
+
+#if RESET_TO_BL31
+#if defined(PLAT_ARM_MEM_PROT_ADDR)
+	arm_nor_psci_do_dyn_mem_protect();
+#endif /* PLAT_ARM_MEM_PROT_ADDR */
+#else
+/*
+ * In this soluction, we also do the security initialzation
+ * even when BL31 is not in the reset vector
+ */
+	npcm845x_security_setup();
+#endif /* RESET_TO_BL31 */
+
+/* Enable and initialize the System level generic timer */
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+
+/* Initialize power controller before setting up topology */
+	plat_arm_pwrc_setup();
+
+#if RAS_EXTENSION
+	ras_init();
+#endif
+
+#if USE_DEBUGFS
+	debugfs_init();
+#endif /* USE_DEBUGFS */
+}
+
+void arm_console_runtime_init(void)
+{
+/* Added in order to ignore the original weak function */
+}
+
+void plat_arm_program_trusted_mailbox(uintptr_t address)
+{
+/*
+ * now we don't use ARM mailbox,
+ * so that function added to ignore the weak one
+ */
+}
+
+void __init bl31_plat_arch_setup(void)
+{
+	npcm845x_bl31_plat_arch_setup();
+}
+
+void __init plat_arm_pwrc_setup(void)
+{
+/* NPCM850 is always powered so no need for power control */
+}
+
+void __init npcm845x_bl31_plat_arch_setup(void)
+{
+	const mmap_region_t bl_regions[] = {
+		MAP_BL31_TOTAL,
+#if SEPARATE_NOBITS_REGION
+		MAP_BL31_NOBITS,
+#endif /* SEPARATE_NOBITS_REGION */
+		ARM_MAP_BL_RO,
+#if USE_ROMLIB
+		ARM_MAP_ROMLIB_CODE,
+		ARM_MAP_ROMLIB_DATA,
+#endif /* USE_ROMLIB */
+#if USE_COHERENT_MEM
+		ARM_MAP_BL_COHERENT_RAM,
+#endif /* USE_COHERENT_MEM */
+		ARM_MAP_SHARED_RAM,
+#ifdef SECONDARY_BRINGUP
+		ARM_MAP_NS_DRAM1,
+	#ifdef BL32_BASE
+		ARM_MAP_BL32_CORE_MEM
+	#endif /* BL32_BASE */
+#endif /* SECONDARY_BRINGUP */
+		{0}
+	};
+	setup_page_tables(bl_regions, plat_arm_get_mmap());
+	enable_mmu_el3(0U);
+}
diff --git a/plat/nuvoton/npcm845x/npcm845x_common.c b/plat/nuvoton/npcm845x/npcm845x_common.c
new file mode 100644
index 0000000..fc393fd
--- /dev/null
+++ b/plat/nuvoton/npcm845x/npcm845x_common.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+const mmap_region_t plat_arm_mmap[] = {
+	MAP_DEVICE0,
+	MAP_DEVICE1,
+	{0}
+};
diff --git a/plat/nuvoton/npcm845x/npcm845x_psci.c b/plat/nuvoton/npcm845x/npcm845x_psci.c
new file mode 100644
index 0000000..a954265
--- /dev/null
+++ b/plat/nuvoton/npcm845x/npcm845x_psci.c
@@ -0,0 +1,436 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2017-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/gicv2.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <lib/semihosting.h>
+#include <npcm845x_clock.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <plat_npcm845x.h>
+
+#define ADP_STOPPED_APPLICATION_EXIT 0x20026
+
+/* Make composite power state parameter till power level 0 */
+#if PSCI_EXTENDED_STATE_ID
+/* Not Extended */
+#define npcm845x_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#else
+#define npcm845x_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#endif /* PSCI_EXTENDED_STATE_ID */
+
+#define npcm845x_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
+		 npcm845x_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
+
+/*
+ * The table storing the valid idle power states. Ensure that the
+ * array entries are populated in ascending order of state-id to
+ * enable us to use binary search during power state validation.
+ * The table must be terminated by a NULL entry.
+ */
+static const unsigned int npcm845x_pm_idle_states[] = {
+/*
+ * Cluster = 0 (RUN) CPU=1 (RET, higest in idle) -
+ * Retention. The Power state is Stand-by
+ */
+
+/* State-id - 0x01 */
+	npcm845x_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
+				MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
+
+/*
+ * For testing purposes.
+ * Only CPU suspend to standby is supported by NPCM845x
+ */
+	/* State-id - 0x02 */
+	npcm845x_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
+	0,
+};
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the non secure
+ * entrypoint.
+ ******************************************************************************/
+int npcm845x_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+	/*
+	 * Check if the non secure entrypoint lies within the non
+	 * secure DRAM.
+	 */
+	NOTICE("%s() nuvoton_psci\n", __func__);
+#ifdef PLAT_ARM_TRUSTED_DRAM_BASE
+	if ((entrypoint >= PLAT_ARM_TRUSTED_DRAM_BASE) &&
+		(entrypoint < (PLAT_ARM_TRUSTED_DRAM_BASE +
+		PLAT_ARM_TRUSTED_DRAM_SIZE))) {
+		return PSCI_E_INVALID_ADDRESS;
+	}
+#endif /* PLAT_ARM_TRUSTED_DRAM_BASE */
+	/* For TFTS purposes, '0' is also illegal */
+	#ifdef SPD_tspd
+		if (entrypoint == 0) {
+			return PSCI_E_INVALID_ADDRESS;
+		}
+	#endif /* SPD_tspd */
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+void npcm845x_cpu_standby(plat_local_state_t cpu_state)
+{
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	uint64_t scr;
+
+	scr = read_scr_el3();
+	write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
+
+	/*
+	 * Enter standby state
+	 * dsb is good practice before using wfi to enter low power states
+	 */
+	isb();
+	dsb();
+	wfi();
+
+	/* Once awake */
+	write_scr_el3(scr);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+int npcm845x_pwr_domain_on(u_register_t mpidr)
+{
+	int rc = PSCI_E_SUCCESS;
+	int cpu_id = plat_core_pos_by_mpidr(mpidr);
+
+	if ((unsigned int)cpu_id >= PLATFORM_CORE_COUNT) {
+		ERROR("%s()  CPU 0x%X\n", __func__, cpu_id);
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	if (cpu_id == -1) {
+		/* domain on was not called by a CPU */
+		ERROR("%s() was not per CPU 0x%X\n", __func__, cpu_id);
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	unsigned int pos = (unsigned int)plat_core_pos_by_mpidr(mpidr);
+	uintptr_t hold_base = PLAT_NPCM_TM_HOLD_BASE;
+
+	assert(pos < PLATFORM_CORE_COUNT);
+
+	hold_base += pos * PLAT_NPCM_TM_HOLD_ENTRY_SIZE;
+
+	mmio_write_64(hold_base, PLAT_NPCM_TM_HOLD_STATE_GO);
+	/* No cache maintenance here, hold_base is mapped as device memory. */
+
+	/* Make sure that the write has completed */
+	dsb();
+	isb();
+
+	sev();
+
+	return rc;
+}
+
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void npcm845x_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	for (size_t i = 0; (uint64_t)i <= PLAT_MAX_PWR_LVL; i++) {
+		INFO("%s: target_state->pwr_domain_state[%lu]=%x\n",
+			__func__, i, target_state->pwr_domain_state[i]);
+	}
+
+	gicv2_cpuif_disable();
+
+	NOTICE("%s() Out of suspend\n", __func__);
+}
+
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void npcm845x_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	for (size_t i = 0; (uint64_t)i <= PLAT_MAX_PWR_LVL; i++) {
+		INFO("%s: target_state->pwr_domain_state[%lu]=%x\n",
+			__func__, i, target_state->pwr_domain_state[i]);
+	}
+
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+			PLAT_LOCAL_STATE_OFF);
+
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ ******************************************************************************/
+void npcm845x_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	for (size_t i = 0; (uint64_t)i <= PLAT_MAX_PWR_LVL; i++) {
+		INFO("%s: target_state->pwr_domain_state[%lu]=%x\n",
+			__func__, i, target_state->pwr_domain_state[i]);
+	}
+
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+			PLAT_LOCAL_STATE_OFF);
+
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+
+void __dead2 npcm845x_system_reset(void)
+{
+	uintptr_t RESET_BASE_ADDR;
+	uint32_t val;
+
+	NOTICE("%s() nuvoton_psci\n", __func__);
+	console_flush();
+
+	dsbsy();
+	isb();
+
+	/*
+	 * In future - support all reset types. For now, SW1 reset
+	 * Enable software reset 1 to reboot the BMC
+	 */
+	RESET_BASE_ADDR = (uintptr_t)0xF0801000;
+
+	/* Read SW1 control register */
+	val = mmio_read_32(RESET_BASE_ADDR + 0x44);
+	/* Keep SPI BMC & MC persist*/
+	val &= 0xFBFFFFDF;
+	/* Setting SW1 control register */
+	mmio_write_32(RESET_BASE_ADDR + 0x44, val);
+	/* Set SW1 reset */
+	mmio_write_32(RESET_BASE_ADDR + 0x14, 0x8);
+	dsb();
+
+	while (1) {
+		;
+	}
+}
+
+int npcm845x_validate_power_state(unsigned int power_state,
+			 psci_power_state_t *req_state)
+{
+	unsigned int state_id;
+	int i;
+
+	NOTICE("%s() nuvoton_psci\n", __func__);
+	assert(req_state);
+
+	/*
+	 *  Currently we are using a linear search for finding the matching
+	 *  entry in the idle power state array. This can be made a binary
+	 *  search if the number of entries justify the additional complexity.
+	 */
+	for (i = 0; !!npcm845x_pm_idle_states[i]; i++) {
+		if (power_state == npcm845x_pm_idle_states[i]) {
+			break;
+		}
+	}
+
+	/* Return error if entry not found in the idle state array */
+	if (!npcm845x_pm_idle_states[i]) {
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	i = 0;
+	state_id = psci_get_pstate_id(power_state);
+
+	/* Parse the State ID and populate the state info parameter */
+	while (state_id) {
+		req_state->pwr_domain_state[i++] = (uint8_t)state_id &
+						PLAT_LOCAL_PSTATE_MASK;
+		state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+/*
+ * The NPCM845 doesn't truly support power management at SYSTEM power domain.
+ * The SYSTEM_SUSPEND will be down-graded to the cluster level within
+ * the platform layer. The `fake` SYSTEM_SUSPEND allows us to validate
+ * some of the driver save and restore sequences on FVP.
+ */
+#if !ARM_BL31_IN_DRAM
+void npcm845x_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+	unsigned int i;
+
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	for (i = ARM_PWR_LVL0; (uint64_t)i <= PLAT_MAX_PWR_LVL; i++) {
+		req_state->pwr_domain_state[i] = (uint8_t)PLAT_LOCAL_STATE_OFF;
+	}
+}
+#endif /* !ARM_BL31_IN_DRAM */
+
+/*
+ * The rest of the PSCI implementation are for testing purposes only.
+ * Not supported in Arbel
+ */
+void __dead2 npcm845x_system_off(void)
+{
+	console_flush();
+
+	dsbsy();
+	isb();
+
+	/* NPCM845 doesn't allow real system off, Do reaset instead */
+	/* Do reset here TBD which, in the meanwhile SW1 reset */
+	for (;;) {
+		wfi();
+	}
+}
+
+void __dead2 plat_secondary_cold_boot_setup(void);
+
+void __dead2 npcm845x_pwr_down_wfi(
+		const psci_power_state_t *target_state)
+{
+	uintptr_t hold_base = PLAT_NPCM_TM_HOLD_BASE;
+	unsigned int pos = plat_my_core_pos();
+
+	if (pos == 0) {
+		/*
+		 * The secondaries will always be in a wait
+		 * for warm boot on reset, but the BSP needs
+		 * to be able to distinguish between waiting
+		 * for warm boot (e.g. after psci_off, waiting
+		 * for psci_on) and a cold boot.
+		 */
+		mmio_write_64(hold_base, PLAT_NPCM_TM_HOLD_STATE_BSP_OFF);
+		/* No cache maintenance here, we run with caches off already. */
+		dsb();
+		isb();
+	}
+
+	wfe();
+
+	while (1) {
+		;
+	}
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void npcm845x_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	NOTICE("%s() nuvoton_psci\n", __func__);
+
+	for (size_t i = 0; (uint64_t)i <= PLAT_MAX_PWR_LVL; i++) {
+		INFO("%s: target_state->pwr_domain_state[%lu]=%x\n",
+			__func__, i, target_state->pwr_domain_state[i]);
+	}
+
+	plat_secondary_cold_boot_setup();
+}
+
+static const plat_psci_ops_t npcm845x_plat_psci_ops = {
+	.cpu_standby = npcm845x_cpu_standby,
+	.pwr_domain_on = npcm845x_pwr_domain_on,
+	.pwr_domain_suspend = npcm845x_pwr_domain_suspend,
+	.pwr_domain_on_finish = npcm845x_pwr_domain_on_finish,
+	.pwr_domain_suspend_finish = npcm845x_pwr_domain_suspend_finish,
+	.system_reset = npcm845x_system_reset,
+	.validate_power_state = npcm845x_validate_power_state,
+	.validate_ns_entrypoint = npcm845x_validate_ns_entrypoint,
+
+	/* For testing purposes only This PSCI states are not supported */
+	.pwr_domain_off = npcm845x_pwr_domain_off,
+	.pwr_domain_pwr_down_wfi = npcm845x_pwr_down_wfi,
+};
+
+/* For reference only
+ * typedef struct plat_psci_ops {
+ *	void (*cpu_standby)(plat_local_state_t cpu_state);
+ *	int (*pwr_domain_on)(u_register_t mpidr);
+ *	void (*pwr_domain_off)(const psci_power_state_t *target_state);
+ *	void (*pwr_domain_suspend_pwrdown_early)(
+ *				const psci_power_state_t *target_state);
+ *	void (*pwr_domain_suspend)(const psci_power_state_t *target_state);
+ *	void (*pwr_domain_on_finish)(const psci_power_state_t *target_state);
+ *	void (*pwr_domain_on_finish_late)(
+ *				const psci_power_state_t *target_state);
+ *	void (*pwr_domain_suspend_finish)(
+ *				const psci_power_state_t *target_state);
+ *	void __dead2 (*pwr_domain_pwr_down_wfi)(
+ *				const psci_power_state_t *target_state);
+ *	void __dead2 (*system_off)(void);
+ *	void __dead2 (*system_reset)(void);
+ *	int (*validate_power_state)(unsigned int power_state,
+ *				psci_power_state_t *req_state);
+ *	int (*validate_ns_entrypoint)(uintptr_t ns_entrypoint);
+ *	void (*get_sys_suspend_power_state)(
+ *				psci_power_state_t *req_state);
+ *	int (*get_pwr_lvl_state_idx)(plat_local_state_t pwr_domain_state,
+ *				int pwrlvl);
+ *	int (*translate_power_state_by_mpidr)(u_register_t mpidr,
+ *				unsigned int power_state,
+ *				psci_power_state_t *output_state);
+ *	int (*get_node_hw_state)(u_register_t mpidr, unsigned int power_level);
+ *	int (*mem_protect_chk)(uintptr_t base, u_register_t length);
+ *	int (*read_mem_protect)(int *val);
+ *	int (*write_mem_protect)(int val);
+ *	int (*system_reset2)(int is_vendor,
+ *				int reset_type, u_register_t cookie);
+ * } plat_psci_ops_t;
+ */
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	uintptr_t *entrypoint = (void *)PLAT_NPCM_TM_ENTRYPOINT;
+
+	*entrypoint = sec_entrypoint;
+
+	*psci_ops = &npcm845x_plat_psci_ops;
+
+	return 0;
+}
diff --git a/plat/nuvoton/npcm845x/npcm845x_serial_port.c b/plat/nuvoton/npcm845x/npcm845x_serial_port.c
new file mode 100644
index 0000000..946e9d0
--- /dev/null
+++ b/plat/nuvoton/npcm845x/npcm845x_serial_port.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2017-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdbool.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <npcm845x_clock.h>
+#include <npcm845x_gcr.h>
+#include <npcm845x_lpuart.h>
+#include <plat_npcm845x.h>
+
+
+uintptr_t npcm845x_get_base_uart(UART_DEV_T devNum)
+{
+	return 0xF0000000 + devNum * 0x1000;
+}
+
+uintptr_t npcm845x_get_base_clk(void)
+{
+	return 0xF0801000;
+}
+
+uintptr_t npcm845x_get_base_gcr(void)
+{
+	return 0xF0800000;
+}
+
+void npcm845x_wait_for_empty(int uart_n)
+{
+	volatile struct npcmX50_uart *uart = (struct npcmX50_uart *)npcm845x_get_base_uart(uart_n);
+
+	while ((*(uint8_t *)(uintptr_t)(&uart->lsr) & 0x40) == 0x00) {
+/*
+ * wait for THRE (Transmitter Holding Register Empty)
+ * and TSR (Transmitter Shift Register) to be empty.
+ * Some delay. notice needed some delay so UartUpdateTool
+ * will pass w/o error log
+ */
+	}
+
+	volatile int delay;
+
+	for (delay = 0; delay < 10000; delay++) {
+		;
+	}
+}
+
+int UART_Init(UART_DEV_T devNum,  UART_BAUDRATE_T baudRate)
+{
+	uint32_t val = 0;
+	uintptr_t clk_base = npcm845x_get_base_clk();
+	uintptr_t gcr_base =  npcm845x_get_base_gcr();
+	uintptr_t uart_base = npcm845x_get_base_uart(devNum);
+	volatile struct npcmX50_uart *uart = (struct npcmX50_uart *)uart_base;
+
+/* Use  CLKREF to be independent of CPU frequency */
+	volatile struct clk_ctl *clk_ctl_obj = (struct clk_ctl *)clk_base;
+	volatile struct npcm845x_gcr *gcr_ctl_obj =
+		(struct npcm845x_gcr *)gcr_base;
+
+	clk_ctl_obj->clksel = clk_ctl_obj->clksel & ~(0x3 << 8);
+	clk_ctl_obj->clksel = clk_ctl_obj->clksel | (0x2 << 8);
+
+	/* Set devider according to baudrate */
+	clk_ctl_obj->clkdiv1 =
+		(unsigned int)(clk_ctl_obj->clkdiv1 & ~(0x1F << 16));
+
+	/* clear bits 11-15 - set value 0 */
+	if (devNum == UART3_DEV) {
+		clk_ctl_obj->clkdiv2 =
+			(unsigned int)(clk_ctl_obj->clkdiv2 & ~(0x1F << 11));
+	}
+
+	npcm845x_wait_for_empty(devNum);
+
+	val = (uint32_t)LCR_WLS_8bit;
+	mmio_write_8((uintptr_t)&uart->lcr, (uint8_t)val);
+
+	/* disable all interrupts */
+	mmio_write_8((uintptr_t)&uart->ier, 0);
+
+	/*
+	 * Set the RX FIFO trigger level, reset RX, TX FIFO
+	 */
+	val = (uint32_t)(FCR_FME | FCR_RFR | FCR_TFR | FCR_RFITL_4B);
+
+	/* reset TX and RX FIFO */
+	mmio_write_8((uintptr_t)(&uart->fcr), (uint8_t)val);
+
+	/* Set port for 8 bit, 1 stop, no parity */
+	val = (uint32_t)LCR_WLS_8bit;
+
+	/* Set DLAB bit; Accesses the Divisor Latch Registers (DLL, DLM). */
+	val |= 0x80;
+	mmio_write_8((uintptr_t)(&uart->lcr), (uint8_t)val);
+
+	/* Baud Rate = UART Clock 24MHz / (16 * (11+2)) = 115384 */
+	mmio_write_8((uintptr_t)(&uart->dll), 11);
+	mmio_write_8((uintptr_t)(&uart->dlm), 0x00);
+
+	val = mmio_read_8((uintptr_t)&uart->lcr);
+
+	/* Clear DLAB bit; Accesses RBR, THR or IER registers. */
+	val &= 0x7F;
+	mmio_write_8((uintptr_t)(&uart->lcr), (uint8_t)val);
+
+	if (devNum == UART0_DEV) {
+		gcr_ctl_obj->mfsel4 &= ~(1 << 1);
+		gcr_ctl_obj->mfsel1 |= 1 << 9;
+	} else if (devNum == UART3_DEV) {
+		/* Pin Mux */
+		gcr_ctl_obj->mfsel4 &= ~(1 << 1);
+		gcr_ctl_obj->mfsel1 |= 1 << 11;
+		gcr_ctl_obj->spswc &= (7 << 0);
+		gcr_ctl_obj->spswc |= (2 << 0);
+	} else {
+		/* halt */
+		while (1) {
+			;
+		}
+	}
+
+	return 0;
+}
diff --git a/plat/nuvoton/npcm845x/platform.mk b/plat/nuvoton/npcm845x/platform.mk
new file mode 100644
index 0000000..92c7e2f
--- /dev/null
+++ b/plat/nuvoton/npcm845x/platform.mk
@@ -0,0 +1,354 @@
+#
+# Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved.
+#
+# Copyright (c) 2017-2023 Nuvoton Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# This is a debug flag for bring-up. It allows reducing CPU numbers
+# SECONDARY_BRINGUP	:=	1
+RESET_TO_BL31	:=	1
+SPMD_SPM_AT_SEL2	:= 0
+#temporary until the RAM size is reduced
+USE_COHERENT_MEM	:=	1
+
+
+$(eval $(call add_define,RESET_TO_BL31))
+
+ifeq (${ARCH}, aarch64)
+# On ARM standard platorms, the TSP can execute from Trusted SRAM,
+# Trusted DRAM (if available) or the TZC secured area of DRAM.
+# TZC secured DRAM is the default.
+
+# Process ARM_BL31_IN_DRAM flag
+ARM_BL31_IN_DRAM	:=	0
+$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
+$(eval $(call add_define,ARM_BL31_IN_DRAM))
+endif
+
+# For the original power-state parameter format, the State-ID can be encoded
+# according to the recommended encoding or zero. This flag determines which
+# State-ID encoding to be parsed.
+ARM_RECOM_STATE_ID_ENC	:=	0
+
+# If the PSCI_EXTENDED_STATE_ID is set, then ARM_RECOM_STATE_ID_ENC
+# need to be set. Else throw a build error.
+ifeq (${PSCI_EXTENDED_STATE_ID}, 1)
+ifeq (${ARM_RECOM_STATE_ID_ENC}, 0)
+$(error Build option ARM_RECOM_STATE_ID_ENC needs to be set if \
+	PSCI_EXTENDED_STATE_ID is set for ARM platforms)
+endif
+endif
+
+# Process ARM_RECOM_STATE_ID_ENC flag
+$(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC))
+$(eval $(call add_define,ARM_RECOM_STATE_ID_ENC))
+
+# Process ARM_DISABLE_TRUSTED_WDOG flag
+# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set
+ARM_DISABLE_TRUSTED_WDOG	:=	0
+ifeq (${SPIN_ON_BL1_EXIT}, 1)
+ARM_DISABLE_TRUSTED_WDOG	:=	1
+endif
+$(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG))
+$(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG))
+
+# Process ARM_CONFIG_CNTACR
+ARM_CONFIG_CNTACR	:=	1
+$(eval $(call assert_boolean,ARM_CONFIG_CNTACR))
+$(eval $(call add_define,ARM_CONFIG_CNTACR))
+
+# Process ARM_BL31_IN_DRAM flag
+ARM_BL31_IN_DRAM	:=	0
+$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
+$(eval $(call add_define,ARM_BL31_IN_DRAM))
+
+# Process ARM_PLAT_MT flag
+ARM_PLAT_MT	:=	0
+$(eval $(call assert_boolean,ARM_PLAT_MT))
+$(eval $(call add_define,ARM_PLAT_MT))
+
+# Use translation tables library v2 by default
+ARM_XLAT_TABLES_LIB_V1	:=	0
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+
+# Don't have the Linux kernel as a BL33 image by default
+ARM_LINUX_KERNEL_AS_BL33	:=	0
+$(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33))
+$(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33))
+
+ifeq (${ARM_LINUX_KERNEL_AS_BL33},1)
+ifeq (${ARCH},aarch64)
+ifneq (${RESET_TO_BL31},1)
+$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_BL31=1.")
+endif
+else
+ifneq (${RESET_TO_SP_MIN},1)
+$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_SP_MIN=1.")
+endif
+endif
+
+ifndef PRELOADED_BL33_BASE
+$(error "PRELOADED_BL33_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
+endif
+
+ifndef ARM_PRELOADED_DTB_BASE
+$(error "ARM_PRELOADED_DTB_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
+endif
+
+$(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
+endif
+
+# Use an implementation of SHA-256 with a smaller memory footprint
+# but reduced speed.
+$(eval $(call add_define,MBEDTLS_SHA256_SMALLER))
+
+# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
+# in the FIP if the platform requires.
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
+endif
+
+# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
+ENABLE_PSCI_STAT	:=	1
+ENABLE_PMF		:=	1
+
+# On ARM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA	:=	1
+
+# On ARM platforms, disable SEPARATE_NOBITS_REGION by default. Both PROGBITS
+# and NOBITS sections of BL31 image are adjacent to each other and loaded
+# into Trusted SRAM.
+SEPARATE_NOBITS_REGION	:=	0
+
+# In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
+# BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
+# the build to require that ARM_BL31_IN_DRAM is enabled as well.
+ifeq ($(SEPARATE_NOBITS_REGION),1)
+ifneq ($(ARM_BL31_IN_DRAM),1)
+$(error For SEPARATE_NOBITS_REGION, ARM_BL31_IN_DRAM must be enabled)
+endif
+
+ifneq ($(RECLAIM_INIT_CODE),0)
+$(error For SEPARATE_NOBITS_REGION, RECLAIM_INIT_CODE cannot be supported)
+endif
+endif
+
+# Enable PIE support for RESET_TO_BL31 case
+ifeq (${RESET_TO_BL31},1)
+ENABLE_PIE	:=	1
+endif
+
+PLAT_INCLUDES	:=	-Iinclude/plat/nuvoton/npcm845x \
+		-Iinclude/plat/nuvoton/common \
+		-Iinclude/drivers/nuvoton/npcm845x \
+
+ifeq (${ARCH}, aarch64)
+PLAT_INCLUDES	+=	-Iinclude/plat/arm/common/aarch64
+endif
+
+# Include GICv3 driver files
+include drivers/arm/gic/v2/gicv2.mk
+
+NPCM850_GIC_SOURCES	:=	${GICV2_SOURCES}
+
+BL31_SOURCES	+=lib/cpus/aarch64/cortex_a35.S \
+		plat/common/plat_psci_common.c \
+		drivers/ti/uart/aarch64/16550_console.S \
+		plat/nuvoton/npcm845x/npcm845x_psci.c \
+		plat/nuvoton/npcm845x/npcm845x_serial_port.c \
+		plat/nuvoton/common/nuvoton_topology.c \
+		plat/nuvoton/npcm845x/npcm845x_bl31_setup.c
+
+PLAT_BL_COMMON_SOURCES	:=	drivers/delay_timer/delay_timer.c \
+		drivers/delay_timer/generic_delay_timer.c \
+		plat/common/plat_gicv2.c \
+		plat/arm/common/arm_gicv2.c \
+		plat/nuvoton/common/plat_nuvoton_gic.c \
+		${NPCM850_GIC_SOURCES} \
+		plat/nuvoton/npcm845x/npcm845x_common.c \
+		plat/nuvoton/common/nuvoton_helpers.S \
+		lib/semihosting/semihosting.c \
+		lib/semihosting/${ARCH}/semihosting_call.S \
+		plat/arm/common/arm_common.c \
+		plat/arm/common/arm_console.c
+
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/xlat_tables_common.c \
+		lib/xlat_tables/${ARCH}/xlat_tables.c
+else
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+endif
+
+ARM_IO_SOURCES	+=	plat/arm/common/arm_io_storage.c \
+		plat/arm/common/fconf/arm_fconf_io.c
+
+ifeq (${SPD},spmd)
+ifeq (${SPMD_SPM_AT_SEL2},1)
+ARM_IO_SOURCES	+=	plat/arm/common/fconf/arm_fconf_sp.c
+endif
+endif
+
+BL1_SOURCES	+=	drivers/io/io_fip.c \
+		drivers/io/io_memmap.c \
+		drivers/io/io_storage.c \
+		plat/arm/common/arm_bl1_setup.c \
+		plat/arm/common/arm_err.c \
+		${ARM_IO_SOURCES}
+
+ifdef EL3_PAYLOAD_BASE
+# Need the plat_arm_program_trusted_mailbox() function to release secondary CPUs
+# from their holding pen
+BL1_SOURCES	+=	plat/arm/common/arm_pm.c
+endif
+
+BL2_SOURCES	+=	drivers/delay_timer/delay_timer.c \
+		drivers/delay_timer/generic_delay_timer.c \
+		drivers/io/io_fip.c \
+		drivers/io/io_memmap.c \
+		drivers/io/io_storage.c \
+		plat/arm/common/arm_bl2_setup.c \
+		plat/arm/common/arm_err.c \
+		${ARM_IO_SOURCES}
+
+# Firmware Configuration Framework sources
+include lib/fconf/fconf.mk
+
+# Add `libfdt` and Arm common helpers required for Dynamic Config
+include lib/libfdt/libfdt.mk
+
+DYN_CFG_SOURCES	+=	plat/arm/common/arm_dyn_cfg.c \
+		plat/arm/common/arm_dyn_cfg_helpers.c \
+		common/fdt_wrappers.c
+
+BL1_SOURCES	+=	${DYN_CFG_SOURCES}
+BL2_SOURCES	+=	${DYN_CFG_SOURCES}
+
+ifeq (${BL2_AT_EL3},1)
+BL2_SOURCES	+=	plat/arm/common/arm_bl2_el3_setup.c
+endif
+
+# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
+# the AArch32 descriptors.
+BL2_SOURCES	+=	plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c
+BL2_SOURCES	+=	plat/arm/common/arm_image_load.c \
+		common/desc_image_load.c
+
+ifeq (${SPD},opteed)
+BL2_SOURCES	+=	lib/optee/optee_utils.c
+endif
+
+BL2U_SOURCES	+=	drivers/delay_timer/delay_timer.c \
+		drivers/delay_timer/generic_delay_timer.c \
+		plat/arm/common/arm_bl2u_setup.c
+
+BL31_SOURCES	+=	plat/arm/common/arm_bl31_setup.c \
+		plat/nuvoton/common/nuvoton_pm.c \
+		plat/nuvoton/common/nuvoton_topology.c \
+		plat/common/plat_psci_common.c
+
+ifeq (${ENABLE_PMF}, 1)
+ifeq (${ARCH}, aarch64)
+BL31_SOURCES	+=	plat/arm/common/aarch64/execution_state_switch.c \
+		plat/arm/common/arm_sip_svc.c \
+		plat/arm/common/plat_arm_sip_svc.c \
+		lib/pmf/pmf_smc.c
+else
+BL32_SOURCES	+=	plat/arm/common/arm_sip_svc.c \
+		plat/arm/common/plat_arm_sip_svc.c \
+		lib/pmf/pmf_smc.c
+endif
+endif
+
+ifeq (${EL3_EXCEPTION_HANDLING},1)
+BL31_SOURCES	+=	plat/arm/common/aarch64/arm_ehf.c
+endif
+
+ifeq (${SDEI_SUPPORT},1)
+BL31_SOURCES	+=	plat/arm/common/aarch64/arm_sdei.c
+ifeq (${SDEI_IN_FCONF},1)
+BL31_SOURCES	+=	plat/arm/common/fconf/fconf_sdei_getter.c
+endif
+endif
+
+# RAS sources
+ifeq (${RAS_EXTENSION},1)
+BL31_SOURCES	+=	lib/extensions/ras/std_err_record.c \
+		lib/extensions/ras/ras_common.c
+endif
+
+# Pointer Authentication sources
+ifeq (${ENABLE_PAUTH}, 1)
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/common/aarch64/arm_pauth.c
+endif
+
+ifeq (${SPD},spmd)
+BL31_SOURCES	+=	plat/common/plat_spmd_manifest.c \
+		common/fdt_wrappers.c \
+		${LIBFDT_SRCS}
+endif
+
+ifneq (${TRUSTED_BOARD_BOOT},0)
+# Include common TBB sources
+AUTH_SOURCES	:=	drivers/auth/auth_mod.c \
+		drivers/auth/crypto_mod.c \
+		drivers/auth/img_parser_mod.c \
+		lib/fconf/fconf_tbbr_getter.c
+
+# Include the selected chain of trust sources.
+ifeq (${COT},tbbr)
+AUTH_SOURCES	+=	drivers/auth/tbbr/tbbr_cot_common.c
+BL1_SOURCES	+=	drivers/auth/tbbr/tbbr_cot_bl1.c
+BL2_SOURCES	+=	drivers/auth/tbbr/tbbr_cot_bl2.c
+else ifeq (${COT},dualroot)
+AUTH_SOURCES	+=	drivers/auth/dualroot/cot.c
+else
+$(error Unknown chain of trust ${COT})
+endif
+
+BL1_SOURCES	+=	${AUTH_SOURCES} \
+		bl1/tbbr/tbbr_img_desc.c \
+		plat/arm/common/arm_bl1_fwu.c \
+		plat/common/tbbr/plat_tbbr.c
+
+BL2_SOURCES	+=	${AUTH_SOURCES} \
+		plat/common/tbbr/plat_tbbr.c
+
+$(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
+
+# We expect to locate the *.mk files under the directories specified below
+CRYPTO_LIB_MK	:=	drivers/auth/mbedtls/mbedtls_crypto.mk
+
+IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
+
+$(info Including ${CRYPTO_LIB_MK})
+include ${CRYPTO_LIB_MK}
+
+$(info Including ${IMG_PARSER_LIB_MK})
+include ${IMG_PARSER_LIB_MK}
+endif
+
+ifeq (${MEASURED_BOOT},1)
+MEASURED_BOOT_MK := drivers/measured_boot/measured_boot.mk
+$(info Including ${MEASURED_BOOT_MK})
+include ${MEASURED_BOOT_MK}
+endif
+
+ifeq (${EL3_EXCEPTION_HANDLING},1)
+BL31_SOURCES	+=	plat/arm/common/aarch64/arm_ehf.c
+endif
+
+BL1_SOURCES	:=
+BL2_SOURCES	:=
+BL2U_SOURCES	:=
+
+DEBUG_CONSOLE	?=	0
+$(eval $(call add_define,DEBUG_CONSOLE))