Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 1284 insertions, 0 deletions

diff --git a/plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c b/plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c
new file mode 100644
index 0000000..715aec4
--- /dev/null
+++ b/plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+
+	/* Fill BL31 related information */
+	{
+		.image_id = BL31_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+		.ep_info.args.arg1 = RPI3_BL31_PLAT_PARAM_VAL,
+#endif
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+# ifdef BL32_BASE
+		.next_handoff_image_id = BL32_IMAGE_ID,
+# else
+		.next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+	},
+
+# ifdef BL32_BASE
+	/* Fill BL32 related information */
+	{
+		.image_id = BL32_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
+
+	/*
+	 * Fill BL32 external 1 related information.
+	 * A typical use for extra1 image is with OP-TEE where it is the pager
+	 * image.
+	 */
+	{
+		.image_id = BL32_EXTRA1_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | NON_EXECUTABLE),
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+
+	/*
+	 * Fill BL32 external 2 related information.
+	 * A typical use for extra2 image is with OP-TEE where it is the paged
+	 * image.
+	 */
+	{
+		.image_id = BL32_EXTRA2_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | NON_EXECUTABLE),
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_SKIP_LOADING),
+#ifdef SPD_opteed
+		.image_info.image_base = RPI3_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = RPI3_OPTEE_PAGEABLE_LOAD_SIZE,
+#endif
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+# endif /* BL32_BASE */
+
+	/* Fill BL33 related information */
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+		.ep_info.pc = PRELOADED_BL33_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_SKIP_LOADING),
+# else
+		.ep_info.pc = PLAT_RPI3_NS_IMAGE_OFFSET,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_RPI3_NS_IMAGE_OFFSET,
+		.image_info.image_max_size = PLAT_RPI3_NS_IMAGE_MAX_SIZE,
+# endif /* PRELOADED_BL33_BASE */
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/rpi/rpi3/include/plat_macros.S b/plat/rpi/rpi3/include/plat_macros.S
new file mode 100644
index 0000000..c0c3967
--- /dev/null
+++ b/plat/rpi/rpi3/include/plat_macros.S
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant platform registers
+	 * whenever an unhandled exception is taken in
+	 * BL31.
+	 * Clobbers: x0 - x10, x16, x17, sp
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/rpi/rpi3/include/platform_def.h b/plat/rpi/rpi3/include/platform_def.h
new file mode 100644
index 0000000..f44d1f5
--- /dev/null
+++ b/plat/rpi/rpi3/include/platform_def.h
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+
+#include "rpi_hw.h"
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define RPI3_BL31_PLAT_PARAM_VAL	ULL(0x0F1E2D3C4B5A6978)
+
+#define PLATFORM_STACK_SIZE		ULL(0x1000)
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
+#define PLATFORM_CLUSTER_COUNT		U(1)
+#define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CORE_COUNT		PLATFORM_CLUSTER0_CORE_COUNT
+
+#define RPI_PRIMARY_CPU			U(0)
+
+#define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL1
+#define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
+					 PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_RET_STATE		U(1)
+#define PLAT_MAX_OFF_STATE		U(2)
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN		U(0)
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET		U(1)
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF		U(2)
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH		U(4)
+#define PLAT_LOCAL_PSTATE_MASK		((U(1) << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT		U(6)
+#define CACHE_WRITEBACK_GRANULE		(U(1) << CACHE_WRITEBACK_SHIFT)
+
+/*
+ * Partition memory into secure ROM, non-secure DRAM, secure "SRAM", and
+ * secure DRAM. Note that this is all actually DRAM with different names,
+ * there is no Secure RAM in the Raspberry Pi 3.
+ */
+#if RPI3_USE_UEFI_MAP
+#define SEC_ROM_BASE			ULL(0x00000000)
+#define SEC_ROM_SIZE			ULL(0x00010000)
+
+/* FIP placed after ROM to append it to BL1 with very little padding. */
+#define PLAT_RPI3_FIP_BASE		ULL(0x00020000)
+#define PLAT_RPI3_FIP_MAX_SIZE		ULL(0x00010000)
+
+/* Reserve 2M of secure SRAM and DRAM, starting at 2M */
+#define SEC_SRAM_BASE			ULL(0x00200000)
+#define SEC_SRAM_SIZE			ULL(0x00100000)
+
+#define SEC_DRAM0_BASE			ULL(0x00300000)
+#define SEC_DRAM0_SIZE			ULL(0x00100000)
+
+/* Windows on ARM requires some RAM at 4M */
+#define NS_DRAM0_BASE			ULL(0x00400000)
+#define NS_DRAM0_SIZE			ULL(0x00C00000)
+#else
+#define SEC_ROM_BASE			ULL(0x00000000)
+#define SEC_ROM_SIZE			ULL(0x00020000)
+
+/* FIP placed after ROM to append it to BL1 with very little padding. */
+#define PLAT_RPI3_FIP_BASE		ULL(0x00020000)
+#define PLAT_RPI3_FIP_MAX_SIZE		ULL(0x001E0000)
+
+/* We have 16M of memory reserved starting at 256M */
+#define SEC_SRAM_BASE			ULL(0x10000000)
+#define SEC_SRAM_SIZE			ULL(0x00100000)
+
+#define SEC_DRAM0_BASE			ULL(0x10100000)
+#define SEC_DRAM0_SIZE			ULL(0x00F00000)
+/* End of reserved memory */
+
+#define NS_DRAM0_BASE			ULL(0x11000000)
+#define NS_DRAM0_SIZE			ULL(0x01000000)
+#endif /* RPI3_USE_UEFI_MAP */
+
+/*
+ * BL33 entrypoint.
+ */
+#define PLAT_RPI3_NS_IMAGE_OFFSET	NS_DRAM0_BASE
+#define PLAT_RPI3_NS_IMAGE_MAX_SIZE	NS_DRAM0_SIZE
+
+/*
+ * I/O registers.
+ */
+#define DEVICE0_BASE			RPI_IO_BASE
+#define DEVICE0_SIZE			RPI_IO_SIZE
+
+/*
+ * Arm TF lives in SRAM, partition it here
+ */
+#define SHARED_RAM_BASE			SEC_SRAM_BASE
+#define SHARED_RAM_SIZE			ULL(0x00001000)
+
+#define BL_RAM_BASE			(SHARED_RAM_BASE + SHARED_RAM_SIZE)
+#define BL_RAM_SIZE			(SEC_SRAM_SIZE - SHARED_RAM_SIZE)
+
+/*
+ * Mailbox to control the secondary cores.All secondary cores are held in a wait
+ * loop in cold boot. To release them perform the following steps (plus any
+ * additional barriers that may be needed):
+ *
+ *     uint64_t *entrypoint = (uint64_t *)PLAT_RPI3_TM_ENTRYPOINT;
+ *     *entrypoint = ADDRESS_TO_JUMP_TO;
+ *
+ *     uint64_t *mbox_entry = (uint64_t *)PLAT_RPI3_TM_HOLD_BASE;
+ *     mbox_entry[cpu_id] = PLAT_RPI3_TM_HOLD_STATE_GO;
+ *
+ *     sev();
+ */
+#define PLAT_RPI3_TRUSTED_MAILBOX_BASE	SHARED_RAM_BASE
+
+/* The secure entry point to be used on warm reset by all CPUs. */
+#define PLAT_RPI3_TM_ENTRYPOINT		PLAT_RPI3_TRUSTED_MAILBOX_BASE
+#define PLAT_RPI3_TM_ENTRYPOINT_SIZE	ULL(8)
+
+/* Hold entries for each CPU. */
+#define PLAT_RPI3_TM_HOLD_BASE		(PLAT_RPI3_TM_ENTRYPOINT + \
+					 PLAT_RPI3_TM_ENTRYPOINT_SIZE)
+#define PLAT_RPI3_TM_HOLD_ENTRY_SIZE	ULL(8)
+#define PLAT_RPI3_TM_HOLD_SIZE		(PLAT_RPI3_TM_HOLD_ENTRY_SIZE * \
+					 PLATFORM_CORE_COUNT)
+
+#define PLAT_RPI3_TRUSTED_MAILBOX_SIZE	(PLAT_RPI3_TM_ENTRYPOINT_SIZE + \
+					 PLAT_RPI3_TM_HOLD_SIZE)
+
+#define PLAT_RPI3_TM_HOLD_STATE_WAIT	ULL(0)
+#define PLAT_RPI3_TM_HOLD_STATE_GO	ULL(1)
+#define PLAT_RPI3_TM_HOLD_STATE_BSP_OFF	ULL(2)
+
+/*
+ * BL1 specific defines.
+ *
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ *
+ * Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using
+ * the current BL1 RW debug size plus a little space for growth.
+ */
+#define PLAT_MAX_BL1_RW_SIZE		ULL(0x12000)
+
+#define BL1_RO_BASE			SEC_ROM_BASE
+#define BL1_RO_LIMIT			(SEC_ROM_BASE + SEC_ROM_SIZE)
+#define BL1_RW_BASE			(BL1_RW_LIMIT - PLAT_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT			(BL_RAM_BASE + BL_RAM_SIZE)
+
+/*
+ * BL2 specific defines.
+ *
+ * Put BL2 just below BL31. BL2_BASE is calculated using the current BL2 debug
+ * size plus a little space for growth.
+ */
+#define PLAT_MAX_BL2_SIZE		ULL(0x2C000)
+
+#define BL2_BASE			(BL2_LIMIT - PLAT_MAX_BL2_SIZE)
+#define BL2_LIMIT			BL31_BASE
+
+/*
+ * BL31 specific defines.
+ *
+ * Put BL31 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL31 debug size plus a little space for growth.
+ */
+#define PLAT_MAX_BL31_SIZE		ULL(0x20000)
+
+#define BL31_BASE			(BL31_LIMIT - PLAT_MAX_BL31_SIZE)
+#define BL31_LIMIT			(BL_RAM_BASE + BL_RAM_SIZE)
+#define BL31_PROGBITS_LIMIT		BL1_RW_BASE
+
+/*
+ * BL32 specific defines.
+ *
+ * BL32 can execute from Secure SRAM or Secure DRAM.
+ */
+#define BL32_SRAM_BASE			BL_RAM_BASE
+#define BL32_SRAM_LIMIT			BL31_BASE
+#define BL32_DRAM_BASE			SEC_DRAM0_BASE
+#define BL32_DRAM_LIMIT			(SEC_DRAM0_BASE + SEC_DRAM0_SIZE)
+
+#ifdef SPD_opteed
+/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
+#define RPI3_OPTEE_PAGEABLE_LOAD_SIZE	0x080000 /* 512KB */
+#define RPI3_OPTEE_PAGEABLE_LOAD_BASE	(BL32_DRAM_LIMIT - \
+					 RPI3_OPTEE_PAGEABLE_LOAD_SIZE)
+#endif
+
+#define SEC_SRAM_ID			0
+#define SEC_DRAM_ID			1
+
+#if RPI3_BL32_RAM_LOCATION_ID == SEC_SRAM_ID
+# define BL32_MEM_BASE			BL_RAM_BASE
+# define BL32_MEM_SIZE			BL_RAM_SIZE
+# define BL32_BASE			BL32_SRAM_BASE
+# define BL32_LIMIT			BL32_SRAM_LIMIT
+#elif RPI3_BL32_RAM_LOCATION_ID == SEC_DRAM_ID
+# define BL32_MEM_BASE			SEC_DRAM0_BASE
+# define BL32_MEM_SIZE			SEC_DRAM0_SIZE
+# define BL32_BASE			BL32_DRAM_BASE
+# define BL32_LIMIT			BL32_DRAM_LIMIT
+#else
+# error "Unsupported RPI3_BL32_RAM_LOCATION_ID value"
+#endif
+#define BL32_SIZE			(BL32_LIMIT - BL32_BASE)
+
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
+
+/*
+ * Other memory-related defines.
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(ULL(1) << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(ULL(1) << 32)
+
+#define MAX_MMAP_REGIONS		8
+#define MAX_XLAT_TABLES			4
+
+#define MAX_IO_DEVICES			U(3)
+#define MAX_IO_HANDLES			U(4)
+
+#define MAX_IO_BLOCK_DEVICES		U(1)
+
+/*
+ * Serial-related constants.
+ */
+#define PLAT_RPI_MINI_UART_BASE		RPI3_MINI_UART_BASE
+#define PLAT_RPI_PL011_UART_BASE	RPI3_PL011_UART_BASE
+#define PLAT_RPI_PL011_UART_CLOCK	RPI3_PL011_UART_CLOCK
+#define PLAT_RPI_UART_BAUDRATE		ULL(115200)
+
+/*
+ * System counter
+ */
+#define SYS_COUNTER_FREQ_IN_TICKS	ULL(19200000)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/rpi/rpi3/include/rpi_hw.h b/plat/rpi/rpi3/include/rpi_hw.h
new file mode 100644
index 0000000..2aecab3
--- /dev/null
+++ b/plat/rpi/rpi3/include/rpi_hw.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI_HW_H
+#define RPI_HW_H
+
+#include <lib/utils_def.h>
+
+/*
+ * Peripherals
+ */
+
+#define RPI_IO_BASE			ULL(0x3F000000)
+#define RPI_IO_SIZE			ULL(0x01000000)
+
+/*
+ * ARM <-> VideoCore mailboxes
+ */
+#define RPI3_MBOX_OFFSET		ULL(0x0000B880)
+#define RPI3_MBOX_BASE			(RPI_IO_BASE + RPI3_MBOX_OFFSET)
+/* VideoCore -> ARM */
+#define RPI3_MBOX0_READ_OFFSET		ULL(0x00000000)
+#define RPI3_MBOX0_PEEK_OFFSET		ULL(0x00000010)
+#define RPI3_MBOX0_SENDER_OFFSET	ULL(0x00000014)
+#define RPI3_MBOX0_STATUS_OFFSET	ULL(0x00000018)
+#define RPI3_MBOX0_CONFIG_OFFSET	ULL(0x0000001C)
+/* ARM -> VideoCore */
+#define RPI3_MBOX1_WRITE_OFFSET		ULL(0x00000020)
+#define RPI3_MBOX1_PEEK_OFFSET		ULL(0x00000030)
+#define RPI3_MBOX1_SENDER_OFFSET	ULL(0x00000034)
+#define RPI3_MBOX1_STATUS_OFFSET	ULL(0x00000038)
+#define RPI3_MBOX1_CONFIG_OFFSET	ULL(0x0000003C)
+/* Mailbox status constants */
+#define RPI3_MBOX_STATUS_FULL_MASK	U(0x80000000) /* Set if full */
+#define RPI3_MBOX_STATUS_EMPTY_MASK	U(0x40000000) /* Set if empty */
+
+/*
+ * Power management, reset controller, watchdog.
+ */
+#define RPI3_IO_PM_OFFSET		ULL(0x00100000)
+#define RPI3_PM_BASE			(RPI_IO_BASE + RPI3_IO_PM_OFFSET)
+/* Registers on top of RPI3_PM_BASE. */
+#define RPI3_PM_RSTC_OFFSET		ULL(0x0000001C)
+#define RPI3_PM_RSTS_OFFSET		ULL(0x00000020)
+#define RPI3_PM_WDOG_OFFSET		ULL(0x00000024)
+/* Watchdog constants */
+#define RPI3_PM_PASSWORD		U(0x5A000000)
+#define RPI3_PM_RSTC_WRCFG_MASK		U(0x00000030)
+#define RPI3_PM_RSTC_WRCFG_FULL_RESET	U(0x00000020)
+/*
+ * The RSTS register is used by the VideoCore firmware when booting the
+ * Raspberry Pi to know which partition to boot from. The partition value is
+ * formed by bits 0, 2, 4, 6, 8 and 10. Partition 63 is used by said firmware
+ * to indicate halt.
+ */
+#define RPI3_PM_RSTS_WRCFG_HALT		U(0x00000555)
+
+/*
+ * Hardware random number generator.
+ */
+#define RPI3_IO_RNG_OFFSET		ULL(0x00104000)
+#define RPI3_RNG_BASE			(RPI_IO_BASE + RPI3_IO_RNG_OFFSET)
+#define RPI3_RNG_CTRL_OFFSET		ULL(0x00000000)
+#define RPI3_RNG_STATUS_OFFSET		ULL(0x00000004)
+#define RPI3_RNG_DATA_OFFSET		ULL(0x00000008)
+#define RPI3_RNG_INT_MASK_OFFSET	ULL(0x00000010)
+/* Enable/disable RNG */
+#define RPI3_RNG_CTRL_ENABLE		U(0x1)
+#define RPI3_RNG_CTRL_DISABLE		U(0x0)
+/* Number of currently available words */
+#define RPI3_RNG_STATUS_NUM_WORDS_SHIFT	U(24)
+#define RPI3_RNG_STATUS_NUM_WORDS_MASK	U(0xFF)
+/* Value to mask interrupts caused by the RNG */
+#define RPI3_RNG_INT_MASK_DISABLE	U(0x1)
+
+/*
+ * Serial ports:
+ * 'Mini UART' in the BCM docucmentation is the 8250 compatible UART.
+ * There is also a PL011 UART, multiplexed to the same pins.
+ */
+#define RPI3_IO_MINI_UART_OFFSET	ULL(0x00215040)
+#define RPI3_MINI_UART_BASE		(RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
+#define RPI3_IO_PL011_UART_OFFSET	ULL(0x00201000)
+#define RPI3_PL011_UART_BASE		(RPI_IO_BASE + RPI3_IO_PL011_UART_OFFSET)
+#define RPI3_PL011_UART_CLOCK		ULL(48000000)
+
+/*
+ * GPIO controller
+ */
+#define RPI3_IO_GPIO_OFFSET		ULL(0x00200000)
+#define RPI3_GPIO_BASE			(RPI_IO_BASE + RPI3_IO_GPIO_OFFSET)
+
+/*
+ * SDHost controller
+ */
+#define RPI3_IO_SDHOST_OFFSET           ULL(0x00202000)
+#define RPI3_SDHOST_BASE                (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET)
+
+/*
+ * Local interrupt controller
+ */
+#define RPI3_INTC_BASE_ADDRESS			ULL(0x40000000)
+/* Registers on top of RPI3_INTC_BASE_ADDRESS */
+#define RPI3_INTC_CONTROL_OFFSET		ULL(0x00000000)
+#define RPI3_INTC_PRESCALER_OFFSET		ULL(0x00000008)
+#define RPI3_INTC_MBOX_CONTROL_OFFSET		ULL(0x00000050)
+#define RPI3_INTC_MBOX_CONTROL_SLOT3_FIQ	ULL(0x00000080)
+#define RPI3_INTC_PENDING_FIQ_OFFSET		ULL(0x00000070)
+#define RPI3_INTC_PENDING_FIQ_MBOX3		ULL(0x00000080)
+
+#endif /* RPI_HW_H */
diff --git a/plat/rpi/rpi3/platform.mk b/plat/rpi/rpi3/platform.mk
new file mode 100644
index 0000000..06393e4
--- /dev/null
+++ b/plat/rpi/rpi3/platform.mk
@@ -0,0 +1,222 @@
+#
+# Copyright (c) 2013-2023, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include lib/libfdt/libfdt.mk
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_INCLUDES		:=	-Iplat/rpi/common/include		\
+				-Iplat/rpi/rpi3/include
+
+PLAT_BL_COMMON_SOURCES	:=	drivers/ti/uart/aarch64/16550_console.S	\
+				drivers/arm/pl011/aarch64/pl011_console.S \
+				drivers/gpio/gpio.c			\
+				drivers/delay_timer/delay_timer.c	\
+				drivers/rpi3/gpio/rpi3_gpio.c		\
+				plat/rpi/common/aarch64/plat_helpers.S	\
+				plat/rpi/common/rpi3_common.c		\
+				${XLAT_TABLES_LIB_SRCS}
+
+BL1_SOURCES		+=	drivers/io/io_fip.c			\
+				drivers/io/io_memmap.c			\
+				drivers/io/io_storage.c			\
+				lib/cpus/aarch64/cortex_a53.S		\
+				plat/common/aarch64/platform_mp_stack.S	\
+				plat/rpi/rpi3/rpi3_bl1_setup.c		\
+				plat/rpi/common/rpi3_io_storage.c	\
+				drivers/rpi3/mailbox/rpi3_mbox.c	\
+				plat/rpi/rpi3/rpi_mbox_board.c
+
+BL2_SOURCES		+=	common/desc_image_load.c		\
+				drivers/io/io_fip.c			\
+				drivers/io/io_memmap.c			\
+				drivers/io/io_storage.c			\
+				drivers/delay_timer/generic_delay_timer.c \
+				drivers/io/io_block.c			\
+				drivers/mmc/mmc.c			\
+				drivers/rpi3/sdhost/rpi3_sdhost.c	\
+				plat/common/aarch64/platform_mp_stack.S	\
+				plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c \
+				plat/rpi/rpi3/rpi3_bl2_setup.c		\
+				plat/rpi/common/rpi3_image_load.c	\
+				plat/rpi/common/rpi3_io_storage.c
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
+				plat/common/plat_gicv2.c		\
+				plat/common/plat_psci_common.c		\
+				plat/rpi/rpi3/rpi3_bl31_setup.c		\
+				plat/rpi/common/rpi3_pm.c		\
+				plat/rpi/common/rpi3_topology.c		\
+				${LIBFDT_SRCS}
+
+# Tune compiler for Cortex-A53
+ifeq ($(notdir $(CC)),armclang)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a53
+else ifneq ($(findstring clang,$(notdir $(CC))),)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a53
+else
+    TF_CFLAGS_aarch64	+=	-mtune=cortex-a53
+endif
+
+# Platform Makefile target
+# ------------------------
+
+RPI3_BL1_PAD_BIN	:=	${BUILD_PLAT}/bl1_pad.bin
+RPI3_ARMSTUB8_BIN	:=	${BUILD_PLAT}/armstub8.bin
+
+# Add new default target when compiling this platform
+all: armstub
+
+# This target concatenates BL1 and the FIP so that the base addresses match the
+# ones defined in the memory map
+armstub: bl1 fip
+	@echo "  CAT     $@"
+	${Q}cp ${BUILD_PLAT}/bl1.bin ${RPI3_BL1_PAD_BIN}
+	${Q}truncate --size=131072 ${RPI3_BL1_PAD_BIN}
+	${Q}cat ${RPI3_BL1_PAD_BIN} ${BUILD_PLAT}/fip.bin > ${RPI3_ARMSTUB8_BIN}
+	@${ECHO_BLANK_LINE}
+	@echo "Built $@ successfully"
+	@${ECHO_BLANK_LINE}
+
+# Build config flags
+# ------------------
+
+# Enable all errata workarounds for Cortex-A53
+ERRATA_A53_826319		:= 1
+ERRATA_A53_835769		:= 1
+ERRATA_A53_836870		:= 1
+ERRATA_A53_843419		:= 1
+ERRATA_A53_855873		:= 1
+
+WORKAROUND_CVE_2017_5715	:= 0
+
+# Disable stack protector by default
+ENABLE_STACK_PROTECTOR	 	:= 0
+
+# Reset to BL31 isn't supported
+RESET_TO_BL31			:= 0
+
+# Have different sections for code and rodata
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# Use Coherent memory
+USE_COHERENT_MEM		:= 1
+
+# Platform build flags
+# --------------------
+
+# BL33 images are in AArch64 by default
+RPI3_BL33_IN_AARCH32		:= 0
+
+# Assume that BL33 isn't the Linux kernel by default
+RPI3_DIRECT_LINUX_BOOT		:= 0
+
+# UART to use at runtime. -1 means the runtime UART is disabled.
+# Any other value means the default UART will be used.
+RPI3_RUNTIME_UART		:= -1
+
+# Use normal memory mapping for ROM, FIP, SRAM and DRAM
+RPI3_USE_UEFI_MAP		:= 0
+
+# BL32 location
+RPI3_BL32_RAM_LOCATION	:= tdram
+ifeq (${RPI3_BL32_RAM_LOCATION}, tsram)
+  RPI3_BL32_RAM_LOCATION_ID = SEC_SRAM_ID
+else ifeq (${RPI3_BL32_RAM_LOCATION}, tdram)
+  RPI3_BL32_RAM_LOCATION_ID = SEC_DRAM_ID
+else
+  $(error "Unsupported RPI3_BL32_RAM_LOCATION value")
+endif
+
+# Process platform flags
+# ----------------------
+
+$(eval $(call add_define,RPI3_BL32_RAM_LOCATION_ID))
+$(eval $(call add_define,RPI3_BL33_IN_AARCH32))
+$(eval $(call add_define,RPI3_DIRECT_LINUX_BOOT))
+ifdef RPI3_PRELOADED_DTB_BASE
+$(eval $(call add_define,RPI3_PRELOADED_DTB_BASE))
+endif
+$(eval $(call add_define,RPI3_RUNTIME_UART))
+$(eval $(call add_define,RPI3_USE_UEFI_MAP))
+
+# Verify build config
+# -------------------
+#
+ifneq (${RPI3_DIRECT_LINUX_BOOT}, 0)
+  ifndef RPI3_PRELOADED_DTB_BASE
+    $(error Error: RPI3_PRELOADED_DTB_BASE needed if RPI3_DIRECT_LINUX_BOOT=1)
+  endif
+endif
+
+ifneq (${RESET_TO_BL31}, 0)
+  $(error Error: rpi3 needs RESET_TO_BL31=0)
+endif
+
+ifeq (${ARCH},aarch32)
+  $(error Error: AArch32 not supported on rpi3)
+endif
+
+ifneq ($(ENABLE_STACK_PROTECTOR), 0)
+PLAT_BL_COMMON_SOURCES	+=	drivers/rpi3/rng/rpi3_rng.c		\
+				plat/rpi/common/rpi3_stack_protector.c
+endif
+
+ifeq (${SPD},opteed)
+BL2_SOURCES	+=							\
+		lib/optee/optee_utils.c
+endif
+
+# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
+# in the FIP if the platform requires.
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+endif
+
+ifneq (${TRUSTED_BOARD_BOOT},0)
+
+    include drivers/auth/mbedtls/mbedtls_crypto.mk
+    include drivers/auth/mbedtls/mbedtls_x509.mk
+
+    AUTH_SOURCES	:=	drivers/auth/auth_mod.c			\
+				drivers/auth/crypto_mod.c		\
+				drivers/auth/img_parser_mod.c		\
+				drivers/auth/tbbr/tbbr_cot_common.c
+
+    BL1_SOURCES		+=	${AUTH_SOURCES}				\
+				bl1/tbbr/tbbr_img_desc.c		\
+				plat/common/tbbr/plat_tbbr.c		\
+				plat/rpi/common/rpi3_trusted_boot.c    	\
+				plat/rpi/common/rpi3_rotpk.S		\
+				drivers/auth/tbbr/tbbr_cot_bl1.c
+
+    BL2_SOURCES		+=	${AUTH_SOURCES}				\
+				plat/common/tbbr/plat_tbbr.c		\
+				plat/rpi/common/rpi3_trusted_boot.c    	\
+				plat/rpi/common/rpi3_rotpk.S		\
+				drivers/auth/tbbr/tbbr_cot_bl2.c
+
+    ROT_KEY             = $(BUILD_PLAT)/rot_key.pem
+    ROTPK_HASH          = $(BUILD_PLAT)/rotpk_sha256.bin
+
+    $(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
+
+    $(BUILD_PLAT)/bl1/rpi3_rotpk.o: $(ROTPK_HASH)
+    $(BUILD_PLAT)/bl2/rpi3_rotpk.o: $(ROTPK_HASH)
+
+    certificates: $(ROT_KEY)
+
+    $(ROT_KEY): | $(BUILD_PLAT)
+	@echo "  OPENSSL $@"
+	$(Q)${OPENSSL_BIN_PATH}/openssl genrsa 2048 > $@ 2>/dev/null
+
+    $(ROTPK_HASH): $(ROT_KEY)
+	@echo "  OPENSSL $@"
+	$(Q)${OPENSSL_BIN_PATH}/openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
+	${OPENSSL_BIN_PATH}/openssl dgst -sha256 -binary > $@ 2>/dev/null
+endif
diff --git a/plat/rpi/rpi3/rpi3_bl1_setup.c b/plat/rpi/rpi3/rpi3_bl1_setup.c
new file mode 100644
index 0000000..3ac30e0
--- /dev/null
+++ b/plat/rpi/rpi3/rpi3_bl1_setup.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+
+#include <rpi_shared.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL1 */
+static meminfo_t bl1_tzram_layout;
+
+meminfo_t *bl1_plat_sec_mem_layout(void)
+{
+	return &bl1_tzram_layout;
+}
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	/* use the 19.2 MHz clock for the architected timer */
+	mmio_write_32(RPI3_INTC_BASE_ADDRESS + RPI3_INTC_CONTROL_OFFSET, 0);
+	mmio_write_32(RPI3_INTC_BASE_ADDRESS + RPI3_INTC_PRESCALER_OFFSET,
+		      0x80000000);
+
+	/* Initialize the console to provide early debug support */
+	rpi3_console_init();
+
+	/* Allow BL1 to see the whole Trusted RAM */
+	bl1_tzram_layout.total_base = BL_RAM_BASE;
+	bl1_tzram_layout.total_size = BL_RAM_SIZE;
+}
+
+/******************************************************************************
+ * Perform the very early platform specific architecture setup.  This only
+ * does basic initialization. Later architectural setup (bl1_arch_setup())
+ * does not do anything platform specific.
+ *****************************************************************************/
+void bl1_plat_arch_setup(void)
+{
+	rpi3_setup_page_tables(bl1_tzram_layout.total_base,
+			       bl1_tzram_layout.total_size,
+			       BL_CODE_BASE, BL1_CODE_END,
+			       BL1_RO_DATA_BASE, BL1_RO_DATA_END
+#if USE_COHERENT_MEM
+			       , BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END
+#endif
+			      );
+
+	enable_mmu_el3(0);
+}
+
+void bl1_platform_setup(void)
+{
+	uint32_t __unused rev;
+	int __unused rc;
+
+	rc = rpi3_vc_hardware_get_board_revision(&rev);
+
+	if (rc == 0) {
+		const char __unused *model, __unused *info;
+
+		switch (rev) {
+		case 0xA02082:
+			model = "Raspberry Pi 3 Model B";
+			info = "(1GB, Sony, UK)";
+			break;
+		case 0xA22082:
+			model = "Raspberry Pi 3 Model B";
+			info = "(1GB, Embest, China)";
+			break;
+		case 0xA020D3:
+			model = "Raspberry Pi 3 Model B+";
+			info = "(1GB, Sony, UK)";
+			break;
+		default:
+			model = "Unknown";
+			info = "(Unknown)";
+			ERROR("rpi3: Unknown board revision 0x%08x\n", rev);
+			break;
+		}
+
+		NOTICE("rpi3: Detected: %s %s [0x%08x]\n", model, info, rev);
+	} else {
+		ERROR("rpi3: Unable to detect board revision\n");
+	}
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_rpi3_io_setup();
+}
diff --git a/plat/rpi/rpi3/rpi3_bl2_setup.c b/plat/rpi/rpi3/rpi3_bl2_setup.c
new file mode 100644
index 0000000..80e4d8d
--- /dev/null
+++ b/plat/rpi/rpi3/rpi3_bl2_setup.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <lib/optee_utils.h>
+#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/rpi3/gpio/rpi3_gpio.h>
+#include <drivers/rpi3/sdhost/rpi3_sdhost.h>
+
+#include <rpi_shared.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Data structure which holds the MMC info */
+static struct mmc_device_info mmc_info;
+
+static void rpi3_sdhost_setup(void)
+{
+	struct rpi3_sdhost_params params;
+
+	memset(&params, 0, sizeof(struct rpi3_sdhost_params));
+	params.reg_base = RPI3_SDHOST_BASE;
+	params.bus_width = MMC_BUS_WIDTH_1;
+	params.clk_rate = 50000000;
+	params.clk_rate_initial = (RPI3_SDHOST_MAX_CLOCK / HC_CLOCKDIVISOR_MAXVAL);
+	mmc_info.mmc_dev_type = MMC_IS_SD_HC;
+	mmc_info.ocr_voltage = OCR_3_2_3_3 | OCR_3_3_3_4;
+	rpi3_sdhost_init(&params, &mmc_info);
+}
+
+/*******************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
+ * in x0. This memory layout is sitting at the base of the free trusted SRAM.
+ * Copy it to a safe location before its reclaimed by later BL2 functionality.
+ ******************************************************************************/
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			       u_register_t arg2, u_register_t arg3)
+{
+	meminfo_t *mem_layout = (meminfo_t *) arg1;
+
+	/* Initialize the console to provide early debug support */
+	rpi3_console_init();
+
+	/* Enable arch timer */
+	generic_delay_timer_init();
+
+	/* Setup GPIO driver */
+	rpi3_gpio_init();
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Setup SDHost driver */
+	rpi3_sdhost_setup();
+
+	plat_rpi3_io_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	/*
+	 * This is where a TrustZone address space controller and other
+	 * security related peripherals would be configured.
+	 */
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here.
+ ******************************************************************************/
+void bl2_plat_arch_setup(void)
+{
+	rpi3_setup_page_tables(bl2_tzram_layout.total_base,
+			       bl2_tzram_layout.total_size,
+			       BL_CODE_BASE, BL_CODE_END,
+			       BL_RO_DATA_BASE, BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			       , BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END
+#endif
+			      );
+
+	enable_mmu_el1(0);
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+#ifdef SPD_opteed
+	bl_mem_params_node_t *pager_mem_params = NULL;
+	bl_mem_params_node_t *paged_mem_params = NULL;
+#endif
+
+	assert(bl_mem_params != NULL);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+#ifdef SPD_opteed
+		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+		assert(pager_mem_params);
+
+		paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+		assert(paged_mem_params);
+
+		err = parse_optee_header(&bl_mem_params->ep_info,
+				&pager_mem_params->image_info,
+				&paged_mem_params->image_info);
+		if (err != 0)
+			WARN("OPTEE header parse error.\n");
+#endif
+		bl_mem_params->ep_info.spsr = rpi3_get_spsr_for_bl32_entry();
+		break;
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = rpi3_get_spsr_for_bl33_entry();
+
+		/* Shutting down the SDHost driver to let BL33 drives SDHost.*/
+		rpi3_sdhost_stop();
+		break;
+
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
diff --git a/plat/rpi/rpi3/rpi3_bl31_setup.c b/plat/rpi/rpi3/rpi3_bl31_setup.c
new file mode 100644
index 0000000..5915753
--- /dev/null
+++ b/plat/rpi/rpi3/rpi3_bl31_setup.c
@@ -0,0 +1,226 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+#include <common/bl_common.h>
+#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <plat/common/platform.h>
+
+#include <rpi_shared.h>
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type) != 0);
+
+	next_image_info = (type == NON_SECURE)
+			? &bl33_image_ep_info : &bl32_image_ep_info;
+
+	/* None of the images can have 0x0 as the entrypoint. */
+	if (next_image_info->pc) {
+		return next_image_info;
+	} else {
+		return NULL;
+	}
+}
+
+/*******************************************************************************
+ * Return entrypoint of BL33.
+ ******************************************************************************/
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return PLAT_RPI3_NS_IMAGE_OFFSET;
+#endif
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup. Here is an opportunity to copy
+ * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before
+ * they are lost (potentially). This needs to be done before the MMU is
+ * initialized so that the memory layout can be used while creating page
+ * tables. BL2 has flushed this information to memory, so we are guaranteed
+ * to pick up good data.
+ ******************************************************************************/
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+
+{
+	/* Initialize the console to provide early debug support */
+	rpi3_console_init();
+
+	/*
+	 * In debug builds, a special value is passed in 'arg1' to verify
+	 * platform parameters from BL2 to BL31. Not used in release builds.
+	 */
+	assert(arg1 == RPI3_BL31_PLAT_PARAM_VAL);
+
+	/* Check that params passed from BL2 are not NULL. */
+	bl_params_t *params_from_bl2 = (bl_params_t *) arg0;
+
+	assert(params_from_bl2 != NULL);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	/*
+	 * Copy BL33 and BL32 (if present), entry point information.
+	 * They are stored in Secure RAM, in BL2's address space.
+	 */
+	while (bl_params) {
+		if (bl_params->image_id == BL32_IMAGE_ID) {
+			bl32_image_ep_info = *bl_params->ep_info;
+		}
+
+		if (bl_params->image_id == BL33_IMAGE_ID) {
+			bl33_image_ep_info = *bl_params->ep_info;
+		}
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (bl33_image_ep_info.pc == 0) {
+		panic();
+	}
+
+#if RPI3_DIRECT_LINUX_BOOT
+# if RPI3_BL33_IN_AARCH32
+	/*
+	 * According to the file ``Documentation/arm/Booting`` of the Linux
+	 * kernel tree, Linux expects:
+	 * r0 = 0
+	 * r1 = machine type number, optional in DT-only platforms (~0 if so)
+	 * r2 = Physical address of the device tree blob
+	 */
+	VERBOSE("rpi3: Preparing to boot 32-bit Linux kernel\n");
+	bl33_image_ep_info.args.arg0 = 0U;
+	bl33_image_ep_info.args.arg1 = ~0U;
+	bl33_image_ep_info.args.arg2 = (u_register_t) RPI3_PRELOADED_DTB_BASE;
+# else
+	/*
+	 * According to the file ``Documentation/arm64/booting.txt`` of the
+	 * Linux kernel tree, Linux expects the physical address of the device
+	 * tree blob (DTB) in x0, while x1-x3 are reserved for future use and
+	 * must be 0.
+	 */
+	VERBOSE("rpi3: Preparing to boot 64-bit Linux kernel\n");
+	bl33_image_ep_info.args.arg0 = (u_register_t) RPI3_PRELOADED_DTB_BASE;
+	bl33_image_ep_info.args.arg1 = 0ULL;
+	bl33_image_ep_info.args.arg2 = 0ULL;
+	bl33_image_ep_info.args.arg3 = 0ULL;
+# endif /* RPI3_BL33_IN_AARCH32 */
+#endif /* RPI3_DIRECT_LINUX_BOOT */
+}
+
+void bl31_plat_arch_setup(void)
+{
+	rpi3_setup_page_tables(BL31_BASE, BL31_END - BL31_BASE,
+			       BL_CODE_BASE, BL_CODE_END,
+			       BL_RO_DATA_BASE, BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			       , BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END
+#endif
+			      );
+
+	enable_mmu_el3(0);
+}
+
+#ifdef RPI3_PRELOADED_DTB_BASE
+/*
+ * Add information to the device tree (if any) about the reserved DRAM used by
+ * the Trusted Firmware.
+ */
+static void rpi3_dtb_add_mem_rsv(void)
+{
+	int i, regions, rc;
+	uint64_t addr, size;
+	void *dtb = (void *)RPI3_PRELOADED_DTB_BASE;
+
+	INFO("rpi3: Checking DTB...\n");
+
+	/* Return if no device tree is detected */
+	if (fdt_check_header(dtb) != 0)
+		return;
+
+	regions = fdt_num_mem_rsv(dtb);
+
+	VERBOSE("rpi3: Found %d mem reserve region(s)\n", regions);
+
+	/* We expect to find one reserved region that we can modify */
+	if (regions < 1)
+		return;
+
+	/*
+	 * Look for the region that corresponds to the default boot firmware. It
+	 * starts at address 0, and it is not needed when the default firmware
+	 * is replaced by this port of the Trusted Firmware.
+	 */
+	for (i = 0; i < regions; i++) {
+		if (fdt_get_mem_rsv(dtb, i, &addr, &size) != 0)
+			continue;
+
+		if (addr != 0x0)
+			continue;
+
+		VERBOSE("rpi3: Firmware mem reserve region found\n");
+
+		rc = fdt_del_mem_rsv(dtb, i);
+		if (rc != 0) {
+			INFO("rpi3: Can't remove mem reserve region (%d)\n", rc);
+		}
+
+		break;
+	}
+
+	if (i == regions) {
+		VERBOSE("rpi3: Firmware mem reserve region not found\n");
+	}
+
+	/*
+	 * Reserve all SRAM. As said in the documentation, this isn't actually
+	 * secure memory, so it is needed to tell BL33 that this is a reserved
+	 * memory region. It doesn't guarantee it won't use it, though.
+	 */
+	rc = fdt_add_mem_rsv(dtb, SEC_SRAM_BASE, SEC_SRAM_SIZE);
+	if (rc != 0) {
+		WARN("rpi3: Can't add mem reserve region (%d)\n", rc);
+	}
+
+	INFO("rpi3: Reserved 0x%llx - 0x%llx in DTB\n", SEC_SRAM_BASE,
+	     SEC_SRAM_BASE + SEC_SRAM_SIZE);
+}
+#endif
+
+void bl31_platform_setup(void)
+{
+#ifdef RPI3_PRELOADED_DTB_BASE
+	/* Only modify a DTB if we know where to look for it */
+	rpi3_dtb_add_mem_rsv();
+#endif
+}
diff --git a/plat/rpi/rpi3/rpi_mbox_board.c b/plat/rpi/rpi3/rpi_mbox_board.c
new file mode 100644
index 0000000..e7c1e2b
--- /dev/null
+++ b/plat/rpi/rpi3/rpi_mbox_board.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MBOX_BUFFER_SIZE		U(256)
+static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
+
+/*******************************************************************************
+ * Request board revision. Returns the revision and 0 on success, -1 on error.
+ ******************************************************************************/
+int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
+{
+	uint32_t tag_request_size = sizeof(uint32_t);
+	rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
+
+	assert(revision != NULL);
+
+	VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
+
+	req->size = sizeof(rpi3_mbox_buffer);
+	req->code = RPI3_MBOX_PROCESS_REQUEST;
+
+	req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
+	req->tags[1] = tag_request_size; /* Space available for the response */
+	req->tags[2] = RPI3_TAG_REQUEST;
+	req->tags[3] = 0; /* Placeholder for the response */
+
+	req->tags[4] = RPI3_TAG_END;
+
+	rpi3_vc_mailbox_request_send(req, RPI3_MBOX_BUFFER_SIZE);
+
+	if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
+		ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
+		return -1;
+	}
+
+	if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
+		ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
+		      req->tags[2]);
+		return -1;
+	}
+
+	*revision = req->tags[3];
+
+	return 0;
+}