diff options
Diffstat (limited to 'plat/mediatek/mt8195/drivers/dfd/plat_dfd.h')
| -rw-r--r-- | plat/mediatek/mt8195/drivers/dfd/plat_dfd.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/plat/mediatek/mt8195/drivers/dfd/plat_dfd.h b/plat/mediatek/mt8195/drivers/dfd/plat_dfd.h new file mode 100644 index 0000000..2a7e979 --- /dev/null +++ b/plat/mediatek/mt8195/drivers/dfd/plat_dfd.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2021, MediaTek Inc. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef PLAT_DFD_H +#define PLAT_DFD_H + +#include <arch_helpers.h> +#include <lib/mmio.h> +#include <platform_def.h> + +#define sync_writel(addr, val) do { mmio_write_32((addr), (val)); \ + dsbsy(); \ + } while (0) + +#define PLAT_MTK_DFD_SETUP_MAGIC (0x99716150) +#define PLAT_MTK_DFD_READ_MAGIC (0x99716151) +#define PLAT_MTK_DFD_WRITE_MAGIC (0x99716152) + +#define MTK_DRM_LATCH_CTL1 (DRM_BASE + 0x40) +#define MTK_DRM_LATCH_CTL2 (DRM_BASE + 0x44) + +#define MTK_WDT_BASE (RGU_BASE) +#define MTK_WDT_INTERVAL (MTK_WDT_BASE + 0x10) +#define MTK_WDT_LATCH_CTL2 (MTK_WDT_BASE + 0x48) + +#define MCU_BIU_BASE (MCUCFG_BASE) +#define MISC1_CFG_BASE (MCU_BIU_BASE + 0xE040) +#define DFD_INTERNAL_CTL (MISC1_CFG_BASE + 0x00) +#define DFD_INTERNAL_PWR_ON (MISC1_CFG_BASE + 0x08) +#define DFD_CHAIN_LENGTH0 (MISC1_CFG_BASE + 0x0C) +#define DFD_INTERNAL_SHIFT_CLK_RATIO (MISC1_CFG_BASE + 0x10) +#define DFD_CHAIN_LENGTH1 (MISC1_CFG_BASE + 0x1C) +#define DFD_CHAIN_LENGTH2 (MISC1_CFG_BASE + 0x20) +#define DFD_CHAIN_LENGTH3 (MISC1_CFG_BASE + 0x24) +#define DFD_INTERNAL_TEST_SO_0 (MISC1_CFG_BASE + 0x28) +#define DFD_INTERNAL_NUM_OF_TEST_SO_GROUP (MISC1_CFG_BASE + 0x30) +#define DFD_INTERNAL_TEST_SO_OVER_64 (MISC1_CFG_BASE + 0x34) +#define DFD_INTERNAL_SW_NS_TRIGGER (MISC1_CFG_BASE + 0x3c) +#define DFD_V30_CTL (MISC1_CFG_BASE + 0x48) +#define DFD_V30_BASE_ADDR (MISC1_CFG_BASE + 0x4C) +#define DFD_POWER_CTL (MISC1_CFG_BASE + 0x50) +#define DFD_TEST_SI_0 (MISC1_CFG_BASE + 0x58) +#define DFD_TEST_SI_1 (MISC1_CFG_BASE + 0x5C) +#define DFD_CLEAN_STATUS (MISC1_CFG_BASE + 0x60) +#define DFD_TEST_SI_2 (MISC1_CFG_BASE + 0x1D8) +#define DFD_TEST_SI_3 (MISC1_CFG_BASE + 0x1DC) +#define DFD_READ_ADDR (MISC1_CFG_BASE + 0x1E8) +#define DFD_HW_TRIGGER_MASK (MISC1_CFG_BASE + 0xBC) + +#define DFD_V35_ENABLE (MCU_BIU_BASE + 0xE0A8) +#define DFD_V35_TAP_NUMBER (MCU_BIU_BASE + 0xE0AC) +#define DFD_V35_TAP_EN (MCU_BIU_BASE + 0xE0B0) +#define DFD_V35_CTL (MCU_BIU_BASE + 0xE0B4) +#define DFD_V35_SEQ0_0 (MCU_BIU_BASE + 0xE0C0) +#define DFD_V35_SEQ0_1 (MCU_BIU_BASE + 0xE0C4) +#define DFD_V50_GROUP_0_63_DIFF (MCU_BIU_BASE + 0xE2AC) + +#define DFD_O_PROTECT_EN_REG (0x10001220) +#define DFD_O_INTRF_MCU_PWR_CTL_MASK (0x10001A3C) +#define DFD_O_SET_BASEADDR_REG (0x10043000) +#define DFD_O_REG_0 (0x10001390) + +#define DFD_CACHE_DUMP_ENABLE 1U +#define DFD_PARITY_ERR_TRIGGER 2U + +#define DFD_V35_TAP_EN_VAL (0x43FF) +#define DFD_V35_SEQ0_0_VAL (0x63668820) +#define DFD_READ_ADDR_VAL (0x40000008) +#define DFD_CHAIN_LENGTH_VAL (0xFFFFFFFF) + +#define MTK_WDT_LATCH_CTL2_VAL (0x9507FFFF) +#define MTK_WDT_INTERVAL_VAL (0x6600000A) +#define MTK_DRM_LATCH_CTL2_VAL (0x950600C8) +#define MTK_DRM_LATCH_CTL2_CACHE_VAL (0x95065DC0) + +#define MTK_DRM_LATCH_CTL1_VAL (0x95000013) + +void dfd_resume(void); +uint64_t dfd_smc_dispatcher(uint64_t arg0, uint64_t arg1, + uint64_t arg2, uint64_t arg3); + +#endif /* PLAT_DFD_H */ |