diff options
Diffstat (limited to 'plat/nxp/soc-ls1046a/aarch64')
| -rw-r--r-- | plat/nxp/soc-ls1046a/aarch64/ls1046a.S | 937 | ||||
| -rw-r--r-- | plat/nxp/soc-ls1046a/aarch64/ls1046a_helpers.S | 92 |
2 files changed, 1029 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1046a/aarch64/ls1046a.S b/plat/nxp/soc-ls1046a/aarch64/ls1046a.S new file mode 100644 index 0000000..daa0542 --- /dev/null +++ b/plat/nxp/soc-ls1046a/aarch64/ls1046a.S @@ -0,0 +1,937 @@ +/* + * Copyright 2020-2022 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include <asm_macros.S> +#include <dcfg_lsch2.h> +#include <nxp_timer.h> +#include <plat_gic.h> +#include <scfg.h> + +#include <bl31_data.h> +#include <plat_psci.h> +#include <platform_def.h> + +#define DAIF_DATA AUX_01_DATA +#define TIMER_CNTRL_DATA AUX_02_DATA + +.global soc_init_lowlevel +.global soc_init_percpu +.global _soc_core_release +.global _soc_core_restart +.global _soc_ck_disabled +.global _soc_sys_reset +.global _soc_sys_off +.global _soc_set_start_addr +.global _getGICC_BaseAddr +.global _getGICD_BaseAddr +.global _soc_core_prep_off +.global _soc_core_entr_off +.global _soc_core_exit_off +.global _soc_core_prep_stdby +.global _soc_core_entr_stdby +.global _soc_core_exit_stdby +.global _soc_core_prep_pwrdn +.global _soc_core_entr_pwrdn +.global _soc_core_exit_pwrdn +.global _soc_clstr_prep_stdby +.global _soc_clstr_exit_stdby +.global _soc_clstr_prep_pwrdn +.global _soc_clstr_exit_pwrdn +.global _soc_sys_prep_stdby +.global _soc_sys_exit_stdby +.global _soc_sys_prep_pwrdn +.global _soc_sys_pwrdn_wfi +.global _soc_sys_exit_pwrdn + + +/* This function initialize the soc + * in: void + * out: void + */ +func soc_init_lowlevel + ret +endfunc soc_init_lowlevel + + +/* void soc_init_percpu(void) + * this function performs any soc-specific initialization that is needed on + * a per-core basis + * in: none + * out: none + * uses x0, x1, x2, x3 + */ +func soc_init_percpu + mov x3, x30 + + bl plat_my_core_mask + mov x2, x0 + + /* see if this core is marked for prefetch disable */ + mov x0, #PREFETCH_DIS_OFFSET + bl _get_global_data /* 0-1 */ + tst x0, x2 + b.eq 1f + bl _disable_ldstr_pfetch_A72 /* 0 */ +1: + mov x30, x3 + ret +endfunc soc_init_percpu + +/* part of CPU_ON + * this function releases a secondary core from reset + * in: x0 = core_mask_lsb + * out: none + * uses: x0, x1, x2, x3 + */ +func _soc_core_release + +#if (TEST_BL31) + rbit w2, w0 + /* x2 = core mask msb */ +#else + mov x2, x0 +#endif + /* write COREBCR */ + mov x1, #NXP_SCFG_ADDR + rev w3, w2 + str w3, [x1, #SCFG_COREBCR_OFFSET] + isb + + /* read-modify-write BRR */ + mov x1, #NXP_DCFG_ADDR + ldr w2, [x1, #DCFG_BRR_OFFSET] + rev w3, w2 + orr w3, w3, w0 + rev w2, w3 + str w2, [x1, #DCFG_BRR_OFFSET] + isb + + /* send event */ + sev + isb + ret +endfunc _soc_core_release + + +/* part of CPU_ON + * this function restarts a core shutdown via _soc_core_entr_off + * in: x0 = core mask lsb (of the target cpu) + * out: x0 == 0, on success + * x0 != 0, on failure + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_core_restart + mov x5, x30 + mov x3, x0 + + /* + * unset ph20 request in RCPM_PCPH20CLEARR + * this is an lsb-0 register + */ + ldr x1, =NXP_RCPM_ADDR + rev w2, w3 + str w2, [x1, #RCPM_PCPH20CLRR_OFFSET] + dsb sy + isb + + bl _getGICD_BaseAddr + mov x4, x0 + + /* enable forwarding of group 0 interrupts by setting GICD_CTLR[0] = 1 */ + ldr w1, [x4, #GICD_CTLR_OFFSET] + orr w1, w1, #GICD_CTLR_EN_GRP0 + str w1, [x4, #GICD_CTLR_OFFSET] + dsb sy + isb + + + /* + * fire SGI by writing to GICD_SGIR the following values: + * [25:24] = 0x0 (forward interrupt to the CPU interfaces + * specified in CPUTargetList field) + * [23:16] = core mask lsb[7:0] (forward interrupt to target cpu) + * [15] = 0 (forward SGI only if it is configured as group 0 interrupt) + * [3:0] = 0xF (interrupt ID = 15) + */ + lsl w1, w3, #16 + orr w1, w1, #0xF + str w1, [x4, #GICD_SGIR_OFFSET] + dsb sy + isb + + /* load '0' on success */ + mov x0, xzr + + mov x30, x5 + ret +endfunc _soc_core_restart + +/* + * This function determines if a core is disabled via COREDISR + * in: w0 = core_mask_lsb + * out: w0 = 0, core not disabled + * w0 != 0, core disabled + * uses x0, x1, x2 + */ +func _soc_ck_disabled + /* get base addr of dcfg block */ + mov x1, #NXP_DCFG_ADDR + + /* read COREDISR */ + ldr w1, [x1, #DCFG_COREDISR_OFFSET] + rev w2, w1 + + /* test core bit */ + and w0, w2, w0 + ret +endfunc _soc_ck_disabled + +/* + *This function resets the system via SoC-specific methods + * in: none + * out: none + * uses x0, x1, x2, x3 + */ +func _soc_sys_reset + ldr x2, =NXP_DCFG_ADDR + + /* make sure the mask is cleared in the reset request mask register */ + mov w1, wzr + str w1, [x2, #DCFG_RSTRQMR1_OFFSET] + + /* set the reset request */ + ldr w1, =RSTCR_RESET_REQ + ldr x3, =DCFG_RSTCR_OFFSET + rev w0, w1 + str w0, [x2, x3] + + /* + * just in case this address range is mapped as cacheable, + * flush the write out of the dcaches + */ + add x3, x2, x3 + dc cvac, x3 + dsb st + isb + + /* Note: this function does not return */ +1: + wfi + b 1b +endfunc _soc_sys_reset + +/* + * Part of SYSTEM_OFF + * this function turns off the SoC clocks + * Note: this function is not intended to return, and the only allowable + * recovery is POR + * in: none + * out: none + * uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9 + */ +func _soc_sys_off + + /* mask interrupts at the core */ + mrs x1, DAIF + mov x0, #DAIF_SET_MASK + orr x0, x1, x0 + msr DAIF, x0 + + /* disable icache, dcache, mmu @ EL1 */ + mov x1, #SCTLR_I_C_M_MASK + mrs x0, sctlr_el1 + bic x0, x0, x1 + msr sctlr_el1, x0 + + /* disable dcache for EL3 */ + mrs x1, SCTLR_EL3 + bic x1, x1, #SCTLR_C_MASK + /* make sure icache is enabled */ + orr x1, x1, #SCTLR_I_MASK + msr SCTLR_EL3, x1 + isb + + /* Enable dynamic retention ctrl (CPUECTLR[2:0]) and SMP (CPUECTLR[6]) */ + mrs x0, CORTEX_A72_ECTLR_EL1 + orr x0, x0, #CPUECTLR_TIMER_8TICKS + orr x0, x0, #CPUECTLR_SMPEN_EN + msr CORTEX_A72_ECTLR_EL1, x0 + + /* set WFIL2EN in SCFG_CLUSTERPMCR */ + ldr x0, =SCFG_COREPMCR_OFFSET + ldr x1, =COREPMCR_WFIL2 + bl write_reg_scfg + + /* request LPM20 */ + mov x0, #RCPM_POWMGTCSR_OFFSET + bl read_reg_rcpm + orr x1, x0, #RCPM_POWMGTCSR_LPM20_REQ + mov x0, #RCPM_POWMGTCSR_OFFSET + bl write_reg_rcpm + + dsb sy + isb +1: + wfi + b 1b +endfunc _soc_sys_off + +/* + * Write a register in the RCPM block + * in: x0 = offset + * in: w1 = value to write + * uses x0, x1, x2, x3 + */ +func write_reg_rcpm + ldr x2, =NXP_RCPM_ADDR + /* swap for BE */ + rev w3, w1 + str w3, [x2, x0] + ret +endfunc write_reg_rcpm + +/* + * Read a register in the RCPM block + * in: x0 = offset + * out: w0 = value read + * uses x0, x1, x2 + */ +func read_reg_rcpm + ldr x2, =NXP_RCPM_ADDR + ldr w1, [x2, x0] + /* swap for BE */ + rev w0, w1 + ret +endfunc read_reg_rcpm + +/* + * Write a register in the SCFG block + * in: x0 = offset + * in: w1 = value to write + * uses x0, x1, x2, x3 + */ +func write_reg_scfg + mov x2, #NXP_SCFG_ADDR + /* swap for BE */ + rev w3, w1 + str w3, [x2, x0] + ret +endfunc write_reg_scfg + +/* + * Read a register in the SCFG block + * in: x0 = offset + * out: w0 = value read + * uses x0, x1, x2 + */ +func read_reg_scfg + mov x2, #NXP_SCFG_ADDR + ldr w1, [x2, x0] + /* swap for BE */ + rev w0, w1 + ret +endfunc read_reg_scfg + +/* + * Part of CPU_OFF + * this function programs SoC & GIC registers in preparation for shutting down + * the core + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5, x6, x7 + */ +func _soc_core_prep_off + mov x7, x30 + mov x6, x0 + + /* Set retention control in CPUECTLR make sure smpen bit is set */ + mrs x4, CORTEX_A72_ECTLR_EL1 + bic x4, x4, #CPUECTLR_RET_MASK + orr x4, x4, #CPUECTLR_TIMER_8TICKS + orr x4, x4, #CPUECTLR_SMPEN_EN + msr CORTEX_A72_ECTLR_EL1, x4 + + /* save timer control current value */ + mov x5, #NXP_TIMER_ADDR + ldr w4, [x5, #SYS_COUNTER_CNTCR_OFFSET] + mov w2, w4 + mov x0, x6 + mov x1, #TIMER_CNTRL_DATA + bl _setCoreData + + /* enable the timer */ + orr w4, w4, #CNTCR_EN_MASK + str w4, [x5, #SYS_COUNTER_CNTCR_OFFSET] + + bl _getGICC_BaseAddr + mov x5, x0 + + /* disable signaling of ints */ + ldr w3, [x5, #GICC_CTLR_OFFSET] + bic w3, w3, #GICC_CTLR_EN_GRP0 + bic w3, w3, #GICC_CTLR_EN_GRP1 + str w3, [x5, #GICC_CTLR_OFFSET] + dsb sy + isb + + + /* + * set retention control in SCFG_RETREQCR + * Note: this register is msb 0 + */ + ldr x4, =SCFG_RETREQCR_OFFSET + mov x0, x4 + bl read_reg_scfg + rbit w1, w6 + orr w1, w0, w1 + mov x0, x4 + bl write_reg_scfg + + /* set the priority filter */ + ldr w2, [x5, #GICC_PMR_OFFSET] + orr w2, w2, #GICC_PMR_FILTER + str w2, [x5, #GICC_PMR_OFFSET] + + /* setup GICC_CTLR */ + bic w3, w3, #GICC_CTLR_ACKCTL_MASK + orr w3, w3, #GICC_CTLR_FIQ_EN_MASK + orr w3, w3, #GICC_CTLR_EOImodeS_MASK + orr w3, w3, #GICC_CTLR_CBPR_MASK + str w3, [x5, #GICC_CTLR_OFFSET] + + /* setup the banked-per-core GICD registers */ + bl _getGICD_BaseAddr + mov x5, x0 + + /* define SGI15 as Grp0 */ + ldr w2, [x5, #GICD_IGROUPR0_OFFSET] + bic w2, w2, #GICD_IGROUP0_SGI15 + str w2, [x5, #GICD_IGROUPR0_OFFSET] + + /* set priority of SGI 15 to highest... */ + ldr w2, [x5, #GICD_IPRIORITYR3_OFFSET] + bic w2, w2, #GICD_IPRIORITY_SGI15_MASK + str w2, [x5, #GICD_IPRIORITYR3_OFFSET] + + /* enable SGI 15 */ + ldr w2, [x5, #GICD_ISENABLER0_OFFSET] + orr w2, w2, #GICD_ISENABLE0_SGI15 + str w2, [x5, #GICD_ISENABLER0_OFFSET] + + /* enable the cpu interface */ + bl _getGICC_BaseAddr + mov x2, x0 + orr w3, w3, #GICC_CTLR_EN_GRP0 + str w3, [x2, #GICC_CTLR_OFFSET] + + + /* clear any pending SGIs */ + ldr x2, =GICD_CPENDSGIR_CLR_MASK + add x0, x5, #GICD_CPENDSGIR3_OFFSET + str w2, [x0] + + /* + * Set the PC_PH20_REQ bit in RCPM_PCPH20SETR + * this is an lsb-0 register + */ + mov x1, x6 + mov x0, #RCPM_PCPH20SETR_OFFSET + bl write_reg_rcpm + + dsb sy + isb + mov x30, x7 + ret +endfunc _soc_core_prep_off + +/* + * Part of CPU_OFF + * this function performs the final steps to shutdown the core + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_core_entr_off + mov x5, x30 + mov x4, x0 + + bl _getGICD_BaseAddr + mov x3, x0 + +3: + /* enter low-power state by executing wfi */ + wfi + + /* see if we got hit by SGI 15 */ + add x0, x3, #GICD_SPENDSGIR3_OFFSET + ldr w2, [x0] + and w2, w2, #GICD_SPENDSGIR3_SGI15_MASK + cbz w2, 4f + + /* clear the pending SGI */ + ldr x2, =GICD_CPENDSGIR_CLR_MASK + add x0, x3, #GICD_CPENDSGIR3_OFFSET + str w2, [x0] +4: + /* check if core has been turned on */ + mov x0, x4 + bl _getCoreState + + cmp x0, #CORE_WAKEUP + b.ne 3b + + /* if we get here, then we have exited the wfi */ + dsb sy + isb + mov x30, x5 + ret +endfunc _soc_core_entr_off + +/* + * Part of CPU_OFF + * this function starts the process of starting a core back up + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5, x6 + */ +func _soc_core_exit_off + mov x6, x30 + mov x5, x0 + + /* + * Clear ph20 request in RCPM_PCPH20CLRR - no need + * to do that here, it has been done in _soc_core_restart + */ + bl _getGICC_BaseAddr + mov x1, x0 + + /* read GICC_IAR */ + ldr w0, [x1, #GICC_IAR_OFFSET] + + /* write GICC_EIOR - signal end-of-interrupt */ + str w0, [x1, #GICC_EOIR_OFFSET] + + /* write GICC_DIR - disable interrupt */ + str w0, [x1, #GICC_DIR_OFFSET] + + /* disable signaling of grp0 ints */ + ldr w3, [x1, #GICC_CTLR_OFFSET] + bic w3, w3, #GICC_CTLR_EN_GRP0 + str w3, [x1, #GICC_CTLR_OFFSET] + + /* + * Unset retention request in SCFG_RETREQCR + * Note: this register is msb-0 + */ + ldr x4, =SCFG_RETREQCR_OFFSET + mov x0, x4 + bl read_reg_scfg + rbit w1, w5 + bic w1, w0, w1 + mov x0, x4 + bl write_reg_scfg + + /* restore timer ctrl */ + mov x0, x5 + mov x1, #TIMER_CNTRL_DATA + bl _getCoreData + /* w0 = timer ctrl saved value */ + mov x2, #NXP_TIMER_ADDR + str w0, [x2, #SYS_COUNTER_CNTCR_OFFSET] + + dsb sy + isb + mov x30, x6 + ret +endfunc _soc_core_exit_off + +/* + * Function loads a 64-bit execution address of the core in the soc registers + * BOOTLOCPTRL/H + * in: x0, 64-bit address to write to BOOTLOCPTRL/H + * uses x0, x1, x2, x3 + */ +func _soc_set_start_addr + /* get the 64-bit base address of the scfg block */ + ldr x2, =NXP_SCFG_ADDR + + /* write the 32-bit BOOTLOCPTRL register */ + mov x1, x0 + rev w3, w1 + str w3, [x2, #SCFG_BOOTLOCPTRL_OFFSET] + + /* write the 32-bit BOOTLOCPTRH register */ + lsr x1, x0, #32 + rev w3, w1 + str w3, [x2, #SCFG_BOOTLOCPTRH_OFFSET] + ret +endfunc _soc_set_start_addr + +/* + * This function returns the base address of the gic distributor + * in: none + * out: x0 = base address of gic distributor + * uses x0 + */ +func _getGICD_BaseAddr +#if (TEST_BL31) + /* defect in simulator - gic base addresses are on 4Kb boundary */ + ldr x0, =NXP_GICD_4K_ADDR +#else + ldr x0, =NXP_GICD_64K_ADDR +#endif + ret +endfunc _getGICD_BaseAddr + +/* + * This function returns the base address of the gic controller + * in: none + * out: x0 = base address of gic controller + * uses x0 + */ +func _getGICC_BaseAddr +#if (TEST_BL31) + /* defect in simulator - gic base addresses are on 4Kb boundary */ + ldr x0, =NXP_GICC_4K_ADDR +#else + ldr x0, =NXP_GICC_64K_ADDR +#endif + ret +endfunc _getGICC_BaseAddr + +/* + * Part of CPU_SUSPEND + * this function puts the calling core into standby state + * in: x0 = core mask lsb + * out: none + * uses x0 + */ +func _soc_core_entr_stdby + dsb sy + isb + wfi + + ret +endfunc _soc_core_entr_stdby + + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to standby + * in: x0 = core mask lsb + * out: none + * uses x0, x1 + */ +func _soc_core_prep_stdby + /* clear CORTEX_A72_ECTLR_EL1[2:0] */ + mrs x1, CORTEX_A72_ECTLR_EL1 + bic x1, x1, #CPUECTLR_TIMER_MASK + msr CORTEX_A72_ECTLR_EL1, x1 + + ret +endfunc _soc_core_prep_stdby + +/* + * Part of CPU_SUSPEND + * this function performs any SoC-specific cleanup after standby state + * in: x0 = core mask lsb + * out: none + * uses none + */ +func _soc_core_exit_stdby + ret +endfunc _soc_core_exit_stdby + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_core_prep_pwrdn + mov x5, x30 + mov x4, x0 + + /* enable CPU retention + set smp */ + mrs x1, CORTEX_A72_ECTLR_EL1 + orr x1, x1, #0x1 + orr x1, x1, #CPUECTLR_SMPEN_MASK + msr CORTEX_A72_ECTLR_EL1, x1 + + /* + * set the retention request in SCFG_RETREQCR + * this is an msb-0 register + */ + ldr x3, =SCFG_RETREQCR_OFFSET + mov x0, x3 + bl read_reg_scfg + rbit w1, w4 + orr w1, w0, w1 + mov x0, x3 + bl write_reg_scfg + + /* + * Set the PC_PH20_REQ bit in RCPM_PCPH20SETR + * this is an lsb-0 register + */ + mov x1, x4 + mov x0, #RCPM_PCPH20SETR_OFFSET + bl write_reg_rcpm + + mov x30, x5 + ret +endfunc _soc_core_prep_pwrdn + +/* + * Part of CPU_SUSPEND + * this function puts the calling core into a power-down state + * in: x0 = core mask lsb + * out: none + * uses x0 + */ +func _soc_core_entr_pwrdn + dsb sy + isb + wfi + + ret +endfunc _soc_core_entr_pwrdn + +/* + * Part of CPU_SUSPEND + * this function cleans up after a core exits power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_core_exit_pwrdn + mov x5, x30 + mov x4, x0 + + /* + * Set the PC_PH20_REQ bit in RCPM_PCPH20CLRR + * this is an lsb-0 register + */ + mov x1, x4 + mov x0, #RCPM_PCPH20CLRR_OFFSET + bl write_reg_rcpm + + /* + * Unset the retention request in SCFG_RETREQCR + * this is an msb-0 register + */ + ldr x3, =SCFG_RETREQCR_OFFSET + mov x0, x3 + bl read_reg_scfg + rbit w1, w4 + bic w1, w0, w1 + mov x0, x3 + bl write_reg_scfg + + mov x30, x5 + ret +endfunc _soc_core_exit_pwrdn + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to standby + * in: x0 = core mask lsb + * out: none + * uses none + */ +func _soc_clstr_prep_stdby + /* clear CORTEX_A72_ECTLR_EL1[2:0] */ + mrs x1, CORTEX_A72_ECTLR_EL1 + bic x1, x1, #CPUECTLR_TIMER_MASK + msr CORTEX_A72_ECTLR_EL1, x1 + + ret +endfunc _soc_clstr_prep_stdby + +/* + * Part of CPU_SUSPEND + * this function performs any SoC-specific cleanup after standby state + * in: x0 = core mask lsb + * out: none + * uses none + */ +func _soc_clstr_exit_stdby + ret +endfunc _soc_clstr_exit_stdby + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_clstr_prep_pwrdn + mov x5, x30 + mov x4, x0 + + /* enable CPU retention + set smp */ + mrs x1, CORTEX_A72_ECTLR_EL1 + orr x1, x1, #0x1 + orr x1, x1, #CPUECTLR_SMPEN_MASK + msr CORTEX_A72_ECTLR_EL1, x1 + + /* + * Set the retention request in SCFG_RETREQCR + * this is an msb-0 register. + */ + ldr x3, =SCFG_RETREQCR_OFFSET + mov x0, x3 + bl read_reg_scfg + rbit w1, w4 + orr w1, w0, w1 + mov x0, x3 + bl write_reg_scfg + + /* + * Set the PC_PH20_REQ bit in RCPM_PCPH20SETR + * this is an lsb-0 register. + */ + mov x1, x4 + mov x0, #RCPM_PCPH20SETR_OFFSET + bl write_reg_rcpm + + mov x30, x5 + ret +endfunc _soc_clstr_prep_pwrdn + +/* + * Part of CPU_SUSPEND + * this function cleans up after a core exits power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4, x5 + */ +func _soc_clstr_exit_pwrdn + mov x5, x30 + mov x4, x0 + + /* + * Set the PC_PH20_REQ bit in RCPM_PCPH20CLRR + * this is an lsb-0 register. + */ + mov x1, x4 + mov x0, #RCPM_PCPH20CLRR_OFFSET + bl write_reg_rcpm + + /* + * Unset the retention request in SCFG_RETREQCR + * this is an msb-0 register. + */ + ldr x3, =SCFG_RETREQCR_OFFSET + mov x0, x3 + bl read_reg_scfg + rbit w1, w4 + bic w1, w0, w1 + mov x0, x3 + bl write_reg_scfg + + mov x30, x5 + ret +endfunc _soc_clstr_exit_pwrdn + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to standby + * in: x0 = core mask lsb + * out: none + * uses none + */ +func _soc_sys_prep_stdby + /* clear CORTEX_A72_ECTLR_EL1[2:0] */ + mrs x1, CORTEX_A72_ECTLR_EL1 + bic x1, x1, #CPUECTLR_TIMER_MASK + msr CORTEX_A72_ECTLR_EL1, x1 + + ret +endfunc _soc_sys_prep_stdby + +/* Part of CPU_SUSPEND + * this function performs any SoC-specific cleanup after standby state + * in: x0 = core mask lsb + * out: none + * uses none + */ +func _soc_sys_exit_stdby + ret +endfunc _soc_sys_exit_stdby + +/* + * Part of CPU_SUSPEND + * this function performs SoC-specific programming prior to + * suspend-to-power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1, x2, x3, x4 + */ +func _soc_sys_prep_pwrdn + mov x4, x30 + + /* Enable dynamic retention contrl (CPUECTLR[2:0]) and SMP (CPUECTLR[6]) */ + mrs x0, CORTEX_A72_ECTLR_EL1 + bic x0, x0, #CPUECTLR_TIMER_MASK + orr x0, x0, #CPUECTLR_TIMER_8TICKS + orr x0, x0, #CPUECTLR_SMPEN_EN + msr CORTEX_A72_ECTLR_EL1, x0 + + /* Set WFIL2EN in SCFG_CLUSTERPMCR */ + ldr x0, =SCFG_COREPMCR_OFFSET + ldr x1, =COREPMCR_WFIL2 + bl write_reg_scfg + + isb + mov x30, x4 + ret +endfunc _soc_sys_prep_pwrdn + +/* + * Part of CPU_SUSPEND + * this function puts the calling core, and potentially the soc, into a + * low-power state + * in: x0 = core mask lsb + * out: x0 = 0, success + * x0 < 0, failure + * uses x0, x1, x2, x3, x4 + */ +func _soc_sys_pwrdn_wfi + mov x4, x30 + + /* request LPM20 */ + mov x0, #RCPM_POWMGTCSR_OFFSET + bl read_reg_rcpm + orr x1, x0, #RCPM_POWMGTCSR_LPM20_REQ + mov x0, #RCPM_POWMGTCSR_OFFSET + bl write_reg_rcpm + + dsb sy + isb + wfi + + mov x30, x4 + ret +endfunc _soc_sys_pwrdn_wfi + +/* + * Part of CPU_SUSPEND + * this function performs any SoC-specific cleanup after power-down + * in: x0 = core mask lsb + * out: none + * uses x0, x1 + */ +func _soc_sys_exit_pwrdn + /* clear WFIL2_EN in SCFG_COREPMCR */ + mov x1, #NXP_SCFG_ADDR + str wzr, [x1, #SCFG_COREPMCR_OFFSET] + + ret +endfunc _soc_sys_exit_pwrdn diff --git a/plat/nxp/soc-ls1046a/aarch64/ls1046a_helpers.S b/plat/nxp/soc-ls1046a/aarch64/ls1046a_helpers.S new file mode 100644 index 0000000..a213594 --- /dev/null +++ b/plat/nxp/soc-ls1046a/aarch64/ls1046a_helpers.S @@ -0,0 +1,92 @@ +/* + * Copyright 2018-2022 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include <arch.h> +#include <asm_macros.S> + +#include <platform_def.h> + + .globl plat_secondary_cold_boot_setup + .globl plat_is_my_cpu_primary + .globl plat_reset_handler + .globl platform_mem_init + +func platform_mem1_init + ret +endfunc platform_mem1_init + +func platform_mem_init + ret +endfunc platform_mem_init + +func l2_mem_init + /* Initialize the L2 RAM latency */ + mrs x1, S3_1_c11_c0_2 + mov x0, #0x1C7 + /* Clear L2 Tag RAM latency and L2 Data RAM latency */ + bic x1, x1, x0 + /* Set L2 data ram latency bits [2:0] */ + orr x1, x1, #0x2 + /* set L2 tag ram latency bits [8:6] */ + orr x1, x1, #0x80 + msr S3_1_c11_c0_2, x1 + isb + ret +endfunc l2_mem_init + +func apply_platform_errata + ret +endfunc apply_platform_errata + +func plat_reset_handler + mov x29, x30 +#if (defined(IMAGE_BL2) && RESET_TO_BL2) + bl l2_mem_init +#endif + bl apply_platform_errata + +#if defined(IMAGE_BL31) + ldr x0, =POLICY_SMMU_PAGESZ_64K + cbz x0, 1f + /* Set the SMMU page size in the SACR register */ + bl _set_smmu_pagesz_64 +#endif +1: + /* + * May be cntfrq_el0 needs to be assigned + * the value COUNTER_FREQUENCY + */ + mov x30, x29 + ret +endfunc plat_reset_handler + +/* + * void plat_secondary_cold_boot_setup (void); + * + * This function performs any platform specific actions + * needed for a secondary cpu after a cold reset e.g + * mark the cpu's presence, mechanism to place it in a + * holding pen etc. + */ +func plat_secondary_cold_boot_setup + /* ls1046a does not do cold boot for secondary CPU */ +cb_panic: + b cb_panic +endfunc plat_secondary_cold_boot_setup + +/* + * unsigned int plat_is_my_cpu_primary (void); + * + * Find out whether the current cpu is the primary cpu. + */ +func plat_is_my_cpu_primary + mrs x0, mpidr_el1 + and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK) + cmp x0, 0x0 + cset w0, eq + ret +endfunc plat_is_my_cpu_primary |