1 files changed, 257 insertions, 0 deletions
diff --git a/plat/qemu/common/qemu_pm.c b/plat/qemu/common/qemu_pm.c
new file mode 100644
index 0000000..c2b5091
--- /dev/null
+++ b/plat/qemu/common/qemu_pm.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/psci/psci.h>
+#include <lib/semihosting.h>
+#include <plat/common/platform.h>
+#include <drivers/gpio.h>
+
+#include "qemu_private.h"
+
+#define ADP_STOPPED_APPLICATION_EXIT 0x20026
+
+/*
+ * The secure entry point to be used on warm reset.
+ */
+static unsigned long secure_entrypoint;
+
+/* Make composite power state parameter till power level 0 */
+#if PSCI_EXTENDED_STATE_ID
+
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#else
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#endif /* PSCI_EXTENDED_STATE_ID */
+
+
+#define qemu_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
+		 qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
+
+
+
+/*
+ *  The table storing the valid idle power states. Ensure that the
+ *  array entries are populated in ascending order of state-id to
+ *  enable us to use binary search during power state validation.
+ *  The table must be terminated by a NULL entry.
+ */
+static const unsigned int qemu_pm_idle_states[] = {
+	/* State-id - 0x01 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
+				MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
+	/* State-id - 0x02 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x22 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_OFF, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
+	0,
+};
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the power state
+ * parameter. The power state parameter has to be a composite power state.
+ ******************************************************************************/
+static int qemu_validate_power_state(unsigned int power_state,
+				psci_power_state_t *req_state)
+{
+	unsigned int state_id;
+	int i;
+
+	assert(req_state);
+
+	/*
+	 *  Currently we are using a linear search for finding the matching
+	 *  entry in the idle power state array. This can be made a binary
+	 *  search if the number of entries justify the additional complexity.
+	 */
+	for (i = 0; !!qemu_pm_idle_states[i]; i++) {
+		if (power_state == qemu_pm_idle_states[i])
+			break;
+	}
+
+	/* Return error if entry not found in the idle state array */
+	if (!qemu_pm_idle_states[i])
+		return PSCI_E_INVALID_PARAMS;
+
+	i = 0;
+	state_id = psci_get_pstate_id(power_state);
+
+	/* Parse the State ID and populate the state info parameter */
+	while (state_id) {
+		req_state->pwr_domain_state[i++] = state_id &
+						PLAT_LOCAL_PSTATE_MASK;
+		state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the non secure
+ * entrypoint.
+ ******************************************************************************/
+static int qemu_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+	/*
+	 * Check if the non secure entrypoint lies within the non
+	 * secure DRAM.
+	 */
+	if ((entrypoint >= NS_DRAM0_BASE) &&
+	    (entrypoint < (NS_DRAM0_BASE + NS_DRAM0_SIZE)))
+		return PSCI_E_SUCCESS;
+	return PSCI_E_INVALID_ADDRESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+static void qemu_cpu_standby(plat_local_state_t cpu_state)
+{
+
+	assert(cpu_state == PLAT_LOCAL_STATE_RET);
+
+	/*
+	 * Enter standby state
+	 * dsb is good practice before using wfi to enter low power states
+	 */
+	dsb();
+	wfi();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int qemu_pwr_domain_on(u_register_t mpidr)
+{
+	int rc = PSCI_E_SUCCESS;
+	unsigned pos = plat_core_pos_by_mpidr(mpidr);
+	uint64_t *hold_base = (uint64_t *)PLAT_QEMU_HOLD_BASE;
+
+	hold_base[pos] = PLAT_QEMU_HOLD_STATE_GO;
+	sev();
+
+	return rc;
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+static void qemu_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	qemu_pwr_gic_off();
+}
+
+void __dead2 plat_secondary_cold_boot_setup(void);
+
+static void __dead2
+qemu_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+	disable_mmu_el3();
+	plat_secondary_cold_boot_setup();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	assert(0);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+					PLAT_LOCAL_STATE_OFF);
+
+	qemu_pwr_gic_on_finish();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	assert(0);
+}
+
+/*******************************************************************************
+ * Platform handlers to shutdown/reboot the system
+ ******************************************************************************/
+
+static void __dead2 qemu_system_off(void)
+{
+#ifdef SECURE_GPIO_BASE
+	ERROR("QEMU System Power off: with GPIO.\n");
+	gpio_set_direction(SECURE_GPIO_POWEROFF, GPIO_DIR_OUT);
+	gpio_set_value(SECURE_GPIO_POWEROFF, GPIO_LEVEL_LOW);
+	gpio_set_value(SECURE_GPIO_POWEROFF, GPIO_LEVEL_HIGH);
+#else
+	semihosting_exit(ADP_STOPPED_APPLICATION_EXIT, 0);
+	ERROR("QEMU System Off: semihosting call unexpectedly returned.\n");
+#endif
+	panic();
+}
+
+static void __dead2 qemu_system_reset(void)
+{
+	ERROR("QEMU System Reset: with GPIO.\n");
+#ifdef SECURE_GPIO_BASE
+	gpio_set_direction(SECURE_GPIO_RESET, GPIO_DIR_OUT);
+	gpio_set_value(SECURE_GPIO_RESET, GPIO_LEVEL_LOW);
+	gpio_set_value(SECURE_GPIO_RESET, GPIO_LEVEL_HIGH);
+#else
+	ERROR("QEMU System Reset: operation not handled.\n");
+#endif
+	panic();
+}
+
+static const plat_psci_ops_t plat_qemu_psci_pm_ops = {
+	.cpu_standby = qemu_cpu_standby,
+	.pwr_domain_on = qemu_pwr_domain_on,
+	.pwr_domain_off = qemu_pwr_domain_off,
+	.pwr_domain_pwr_down_wfi = qemu_pwr_domain_pwr_down_wfi,
+	.pwr_domain_suspend = qemu_pwr_domain_suspend,
+	.pwr_domain_on_finish = qemu_pwr_domain_on_finish,
+	.pwr_domain_suspend_finish = qemu_pwr_domain_suspend_finish,
+	.system_off = qemu_system_off,
+	.system_reset = qemu_system_reset,
+	.validate_power_state = qemu_validate_power_state,
+	.validate_ns_entrypoint = qemu_validate_ns_entrypoint
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	uintptr_t *mailbox = (void *) PLAT_QEMU_TRUSTED_MAILBOX_BASE;
+
+	*mailbox = sec_entrypoint;
+	secure_entrypoint = (unsigned long) sec_entrypoint;
+	*psci_ops = &plat_qemu_psci_pm_ops;
+
+	return 0;
+}