Adding upstream version 0.70.1+ds1.upstream/0.70.1+ds1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 157 insertions, 0 deletions

diff --git a/vendor/hashbrown/src/raw/generic.rs b/vendor/hashbrown/src/raw/generic.rs
new file mode 100644
index 0000000..c668b06
--- /dev/null
+++ b/vendor/hashbrown/src/raw/generic.rs
@@ -0,0 +1,157 @@
+use super::bitmask::BitMask;
+use super::EMPTY;
+use core::{mem, ptr};
+
+// Use the native word size as the group size. Using a 64-bit group size on
+// a 32-bit architecture will just end up being more expensive because
+// shifts and multiplies will need to be emulated.
+
+cfg_if! {
+    if #[cfg(any(
+        target_pointer_width = "64",
+        target_arch = "aarch64",
+        target_arch = "x86_64",
+        target_arch = "wasm32",
+    ))] {
+        type GroupWord = u64;
+        type NonZeroGroupWord = core::num::NonZeroU64;
+    } else {
+        type GroupWord = u32;
+        type NonZeroGroupWord = core::num::NonZeroU32;
+    }
+}
+
+pub(crate) type BitMaskWord = GroupWord;
+pub(crate) type NonZeroBitMaskWord = NonZeroGroupWord;
+pub(crate) const BITMASK_STRIDE: usize = 8;
+// We only care about the highest bit of each byte for the mask.
+#[allow(clippy::cast_possible_truncation, clippy::unnecessary_cast)]
+pub(crate) const BITMASK_MASK: BitMaskWord = 0x8080_8080_8080_8080_u64 as GroupWord;
+pub(crate) const BITMASK_ITER_MASK: BitMaskWord = !0;
+
+/// Helper function to replicate a byte across a `GroupWord`.
+#[inline]
+fn repeat(byte: u8) -> GroupWord {
+    GroupWord::from_ne_bytes([byte; Group::WIDTH])
+}
+
+/// Abstraction over a group of control bytes which can be scanned in
+/// parallel.
+///
+/// This implementation uses a word-sized integer.
+#[derive(Copy, Clone)]
+pub(crate) struct Group(GroupWord);
+
+// We perform all operations in the native endianness, and convert to
+// little-endian just before creating a BitMask. The can potentially
+// enable the compiler to eliminate unnecessary byte swaps if we are
+// only checking whether a BitMask is empty.
+#[allow(clippy::use_self)]
+impl Group {
+    /// Number of bytes in the group.
+    pub(crate) const WIDTH: usize = mem::size_of::<Self>();
+
+    /// Returns a full group of empty bytes, suitable for use as the initial
+    /// value for an empty hash table.
+    ///
+    /// This is guaranteed to be aligned to the group size.
+    #[inline]
+    pub(crate) const fn static_empty() -> &'static [u8; Group::WIDTH] {
+        #[repr(C)]
+        struct AlignedBytes {
+            _align: [Group; 0],
+            bytes: [u8; Group::WIDTH],
+        }
+        const ALIGNED_BYTES: AlignedBytes = AlignedBytes {
+            _align: [],
+            bytes: [EMPTY; Group::WIDTH],
+        };
+        &ALIGNED_BYTES.bytes
+    }
+
+    /// Loads a group of bytes starting at the given address.
+    #[inline]
+    #[allow(clippy::cast_ptr_alignment)] // unaligned load
+    pub(crate) unsafe fn load(ptr: *const u8) -> Self {
+        Group(ptr::read_unaligned(ptr.cast()))
+    }
+
+    /// Loads a group of bytes starting at the given address, which must be
+    /// aligned to `mem::align_of::<Group>()`.
+    #[inline]
+    #[allow(clippy::cast_ptr_alignment)]
+    pub(crate) unsafe fn load_aligned(ptr: *const u8) -> Self {
+        // FIXME: use align_offset once it stabilizes
+        debug_assert_eq!(ptr as usize & (mem::align_of::<Self>() - 1), 0);
+        Group(ptr::read(ptr.cast()))
+    }
+
+    /// Stores the group of bytes to the given address, which must be
+    /// aligned to `mem::align_of::<Group>()`.
+    #[inline]
+    #[allow(clippy::cast_ptr_alignment)]
+    pub(crate) unsafe fn store_aligned(self, ptr: *mut u8) {
+        // FIXME: use align_offset once it stabilizes
+        debug_assert_eq!(ptr as usize & (mem::align_of::<Self>() - 1), 0);
+        ptr::write(ptr.cast(), self.0);
+    }
+
+    /// Returns a `BitMask` indicating all bytes in the group which *may*
+    /// have the given value.
+    ///
+    /// This function may return a false positive in certain cases where
+    /// the byte in the group differs from the searched value only in its
+    /// lowest bit. This is fine because:
+    /// - This never happens for `EMPTY` and `DELETED`, only full entries.
+    /// - The check for key equality will catch these.
+    /// - This only happens if there is at least 1 true match.
+    /// - The chance of this happening is very low (< 1% chance per byte).
+    #[inline]
+    pub(crate) fn match_byte(self, byte: u8) -> BitMask {
+        // This algorithm is derived from
+        // https://graphics.stanford.edu/~seander/bithacks.html##ValueInWord
+        let cmp = self.0 ^ repeat(byte);
+        BitMask((cmp.wrapping_sub(repeat(0x01)) & !cmp & repeat(0x80)).to_le())
+    }
+
+    /// Returns a `BitMask` indicating all bytes in the group which are
+    /// `EMPTY`.
+    #[inline]
+    pub(crate) fn match_empty(self) -> BitMask {
+        // If the high bit is set, then the byte must be either:
+        // 1111_1111 (EMPTY) or 1000_0000 (DELETED).
+        // So we can just check if the top two bits are 1 by ANDing them.
+        BitMask((self.0 & (self.0 << 1) & repeat(0x80)).to_le())
+    }
+
+    /// Returns a `BitMask` indicating all bytes in the group which are
+    /// `EMPTY` or `DELETED`.
+    #[inline]
+    pub(crate) fn match_empty_or_deleted(self) -> BitMask {
+        // A byte is EMPTY or DELETED iff the high bit is set
+        BitMask((self.0 & repeat(0x80)).to_le())
+    }
+
+    /// Returns a `BitMask` indicating all bytes in the group which are full.
+    #[inline]
+    pub(crate) fn match_full(self) -> BitMask {
+        self.match_empty_or_deleted().invert()
+    }
+
+    /// Performs the following transformation on all bytes in the group:
+    /// - `EMPTY => EMPTY`
+    /// - `DELETED => EMPTY`
+    /// - `FULL => DELETED`
+    #[inline]
+    pub(crate) fn convert_special_to_empty_and_full_to_deleted(self) -> Self {
+        // Map high_bit = 1 (EMPTY or DELETED) to 1111_1111
+        // and high_bit = 0 (FULL) to 1000_0000
+        //
+        // Here's this logic expanded to concrete values:
+        //   let full = 1000_0000 (true) or 0000_0000 (false)
+        //   !1000_0000 + 1 = 0111_1111 + 1 = 1000_0000 (no carry)
+        //   !0000_0000 + 0 = 1111_1111 + 0 = 1111_1111 (no carry)
+        let full = !self.0 & repeat(0x80);
+        Group(!full + (full >> 7))
+    }
+}