Adding upstream version 4.5.upstream/4.5upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 646 insertions, 0 deletions

diff --git a/examples/chrony-wait.service b/examples/chrony-wait.service
new file mode 100644
index 0000000..374f633
--- /dev/null
+++ b/examples/chrony-wait.service
@@ -0,0 +1,46 @@
+[Unit]
+Description=Wait for chrony to synchronize system clock
+Documentation=man:chronyc(1)
+After=chronyd.service
+Requires=chronyd.service
+Before=time-sync.target
+Wants=time-sync.target
+
+[Service]
+Type=oneshot
+# Wait for chronyd to update the clock and the remaining
+# correction to be less than 0.1 seconds
+ExecStart=/usr/bin/chronyc -h 127.0.0.1,::1 waitsync 0 0.1 0.0 1
+# Wait for at most 3 minutes
+TimeoutStartSec=180
+RemainAfterExit=yes
+StandardOutput=null
+
+CapabilityBoundingSet=
+DevicePolicy=closed
+DynamicUser=yes
+IPAddressAllow=localhost
+IPAddressDeny=any
+LockPersonality=yes
+MemoryDenyWriteExecute=yes
+PrivateDevices=yes
+PrivateUsers=yes
+ProtectClock=yes
+ProtectControlGroups=yes
+ProtectHome=yes
+ProtectHostname=yes
+ProtectKernelLogs=yes
+ProtectKernelModules=yes
+ProtectKernelTunables=yes
+ProtectProc=invisible
+ProtectSystem=strict
+RestrictAddressFamilies=AF_INET AF_INET6
+RestrictNamespaces=yes
+RestrictRealtime=yes
+SystemCallArchitectures=native
+SystemCallFilter=@system-service
+SystemCallFilter=~@privileged @resources
+UMask=0777
+
+[Install]
+WantedBy=multi-user.target
diff --git a/examples/chrony.conf.example1 b/examples/chrony.conf.example1
new file mode 100644
index 0000000..5e93ea7
--- /dev/null
+++ b/examples/chrony.conf.example1
@@ -0,0 +1,12 @@
+# Use public NTP servers from the pool.ntp.org project.
+pool pool.ntp.org iburst
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
diff --git a/examples/chrony.conf.example2 b/examples/chrony.conf.example2
new file mode 100644
index 0000000..bf2bbdd
--- /dev/null
+++ b/examples/chrony.conf.example2
@@ -0,0 +1,47 @@
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (https://www.pool.ntp.org/join.html).
+pool pool.ntp.org iburst
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Enable hardware timestamping on all interfaces that support it.
+#hwtimestamp *
+
+# Increase the minimum number of selectable sources required to adjust
+# the system clock.
+#minsources 2
+
+# Allow NTP client access from local network.
+#allow 192.168.0.0/16
+
+# Serve time even if not synchronized to a time source.
+#local stratum 10
+
+# Require authentication (nts or key option) for all NTP sources.
+#authselectmode require
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Save NTS keys and cookies.
+ntsdumpdir /var/lib/chrony
+
+# Insert/delete leap seconds by slewing instead of stepping.
+#leapsecmode slew
+
+# Get TAI-UTC offset and leap seconds from the system tz database.
+#leapsectz right/UTC
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff --git a/examples/chrony.conf.example3 b/examples/chrony.conf.example3
new file mode 100644
index 0000000..6d84c01
--- /dev/null
+++ b/examples/chrony.conf.example3
@@ -0,0 +1,334 @@
+#######################################################################
+#
+# This is an example chrony configuration file.  You should copy it to
+# /etc/chrony.conf after uncommenting and editing the options that you
+# want to enable.  The more obscure options are not included.  Refer
+# to the documentation for these.
+#
+#######################################################################
+### COMMENTS
+# Any of the following lines are comments (you have a choice of
+# comment start character):
+# a comment
+% a comment
+! a comment
+; a comment
+#
+# Below, the '!' form is used for lines that you might want to
+# uncomment and edit to make your own chrony.conf file.
+#
+#######################################################################
+#######################################################################
+### SPECIFY YOUR NTP SERVERS
+# Most computers using chrony will send measurement requests to one or
+# more 'NTP servers'.  You will probably find that your Internet Service
+# Provider or company have one or more NTP servers that you can specify.
+# Failing that, there are a lot of public NTP servers.  There is a list
+# you can access at http://support.ntp.org/bin/view/Servers/WebHome or
+# you can use servers from the pool.ntp.org project.
+
+! server ntp1.example.net iburst
+! server ntp2.example.net iburst
+! server ntp3.example.net iburst
+
+! pool pool.ntp.org iburst
+ 
+#######################################################################
+### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK
+#
+# To avoid changes being made to your computer's gain/loss compensation
+# when the measurement history is too erratic, you might want to enable
+# one of the following lines.  The first seems good with servers on the
+# Internet, the second seems OK for a LAN environment.
+
+! maxupdateskew 100
+! maxupdateskew 5
+
+# If you want to increase the minimum number of selectable sources
+# required to update the system clock in order to make the
+# synchronisation more reliable, uncomment (and edit) the following
+# line.
+
+! minsources 2
+
+# If your computer has a good stable clock (e.g. it is not a virtual
+# machine), you might also want to reduce the maximum assumed drift
+# (frequency error) of the clock (the value is specified in ppm).
+
+! maxdrift 100
+
+# By default, chronyd allows synchronisation to an unauthenticated NTP
+# source (i.e. specified without the nts and key options) if it agrees with
+# a majority of authenticated NTP sources, or if no authenticated source is
+# specified.  If you don't want chronyd to ever synchronise to an
+# unauthenticated NTP source, uncomment the first from the following lines.
+# If you don't want to synchronise to an unauthenticated NTP source only
+# when an authenticated source is specified, uncomment the second line.
+# If you want chronyd to ignore authentication in the source selection,
+# uncomment the third line.
+
+! authselectmode require
+! authselectmode prefer
+! authselectmode ignore
+
+#######################################################################
+### FILENAMES ETC
+# Chrony likes to keep information about your computer's clock in files.
+# The 'driftfile' stores the computer's clock gain/loss rate in parts
+# per million.  When chronyd starts, the system clock can be tuned
+# immediately so that it doesn't gain or lose any more time.  You
+# generally want this, so it is uncommented.
+
+driftfile /var/lib/chrony/drift
+
+# If you want to enable NTP authentication with symmetric keys, you will need
+# to uncomment the following line and edit the file to set up the keys.
+
+! keyfile /etc/chrony.keys
+
+# If you specify an NTP server with the nts option to enable authentication
+# with the Network Time Security (NTS) mechanism, or enable server NTS with
+# the ntsservercert and ntsserverkey directives below, the following line will
+# allow the client/server to save the NTS keys and cookies in order to reduce
+# the number of key establishments (NTS-KE sessions).
+
+ntsdumpdir /var/lib/chrony
+
+# If chronyd is configured to act as an NTP server and you want to enable NTS
+# for its clients, you will need a TLS certificate and private key.  Uncomment
+# and edit the following lines to specify the locations of the certificate and
+# key.
+
+! ntsservercert /etc/.../nts-server.crt
+! ntsserverkey /etc/.../nts-server.key
+
+# chronyd can save the measurement history for the servers to files when
+# it exits.  This is useful in 2 situations:
+#
+# 1. If you stop chronyd and restart it with the '-r' option (e.g. after
+# an upgrade), the old measurements will still be relevant when chronyd
+# is restarted.  This will reduce the time needed to get accurate
+# gain/loss measurements.
+#
+# 2. On Linux, if you use the RTC support and start chronyd with
+# '-r -s' on bootup, measurements from the last boot will still be
+# useful (the real time clock is used to 'flywheel' chronyd between
+# boots).
+#
+# Uncomment the following line to use this.
+
+! dumpdir /var/lib/chrony
+
+# chronyd writes its process ID to a file.  If you try to start a second
+# copy of chronyd, it will detect that the process named in the file is
+# still running and bail out.  If you want to change the path to the PID
+# file, uncomment this line and edit it.  The default path is shown.
+
+! pidfile /var/run/chrony/chronyd.pid
+
+# If the system timezone database is kept up to date and includes the
+# right/UTC timezone, chronyd can use it to determine the current
+# TAI-UTC offset and when will the next leap second occur.
+
+! leapsectz right/UTC
+
+#######################################################################
+### INITIAL CLOCK CORRECTION
+# This option is useful to quickly correct the clock on start if it's
+# off by a large amount.  The value '1.0' means that if the error is less
+# than 1 second, it will be gradually removed by speeding up or slowing
+# down your computer's clock until it is correct.  If the error is above
+# 1 second, an immediate time jump will be applied to correct it.  The
+# value '3' means the step is allowed only in the first three updates of
+# the clock.  Some software can get upset if the system clock jumps
+# (especially backwards), so be careful!
+
+! makestep 1.0 3
+
+#######################################################################
+### LEAP SECONDS
+# A leap second is an occasional one-second correction of the UTC
+# time scale.  By default, chronyd tells the kernel to insert/delete
+# the leap second, which makes a backward/forward step to correct the
+# clock for it.  As with the makestep directive, this jump can upset
+# some applications.  If you prefer chronyd to make a gradual
+# correction, causing the clock to be off for a longer time, uncomment
+# the following line.
+
+! leapsecmode slew
+
+#######################################################################
+### LOGGING
+# If you want to log information about the time measurements chronyd has
+# gathered, you might want to enable the following lines.  You probably
+# only need this if you really enjoy looking at the logs, you want to
+# produce some graphs of your system's timekeeping performance, or you
+# need help in debugging a problem.
+
+! logdir /var/log/chrony
+! log measurements statistics tracking
+
+# If you have real time clock support enabled (see below), you might want
+# this line instead:
+
+! log measurements statistics tracking rtc
+
+#######################################################################
+### ACTING AS AN NTP SERVER
+# You might want the computer to be an NTP server for other computers.
+#
+# By default, chronyd does not allow any clients to access it.  You need
+# to explicitly enable access using 'allow' and 'deny' directives.
+#
+# e.g. to enable client access from the 192.168.*.* class B subnet,
+
+! allow 192.168/16
+
+# .. but disallow the 192.168.100.* subnet of that,
+
+! deny 192.168.100/24
+
+# You can have as many allow and deny directives as you need.  The order
+# is unimportant.
+
+# If you want to present your computer's time for others to synchronise
+# with, even if you don't seem to be synchronised to any NTP servers
+# yourself, enable the following line.  The value 10 may be varied
+# between 1 and 15.  You should avoid small values because you will look
+# like a real NTP server.  The value 10 means that you appear to be 10
+# NTP 'hops' away from an authoritative source (atomic clock, GPS
+# receiver, radio clock etc).
+
+! local stratum 10
+
+# Normally, chronyd will keep track of how many times each client
+# machine accesses it.  The information can be accessed by the 'clients'
+# command of chronyc.  You can disable this facility by uncommenting the
+# following line.  This will save a bit of memory if you have many
+# clients and it will also disable support for the interleaved mode.
+
+! noclientlog
+
+# The clientlog size is limited to 512KB by default.  If you have many
+# clients, you might want to increase the limit.
+
+! clientloglimit 4194304
+
+# By default, chronyd tries to respond to all valid NTP requests from
+# allowed addresses.  If you want to limit the response rate for NTP
+# clients that are sending requests too frequently, uncomment and edit
+# the following line.
+
+! ratelimit interval 3 burst 8
+
+#######################################################################
+### REPORTING BIG CLOCK CHANGES
+# Perhaps you want to know if chronyd suddenly detects any large error
+# in your computer's clock.  This might indicate a fault or a problem
+# with the server(s) you are using, for example.
+#
+# The next option causes a message to be written to syslog when chronyd
+# has to correct an error above 0.5 seconds (you can use any amount you
+# like).
+
+! logchange 0.5
+
+# The next option will send email to the named person when chronyd has
+# to correct an error above 0.5 seconds.  (If you need to send mail to
+# several people, you need to set up a mailing list or sendmail alias
+# for them and use the address of that.)
+
+! mailonchange wibble@example.net 0.5
+
+#######################################################################
+### COMMAND ACCESS
+# The program chronyc is used to show the current operation of chronyd
+# and to change parts of its configuration whilst it is running.
+
+# By default chronyd binds to the loopback interface.  Uncomment the
+# following lines to allow receiving command packets from remote hosts.
+
+! bindcmdaddress 0.0.0.0
+! bindcmdaddress ::
+
+# Normally, chronyd will only allow connections from chronyc on the same
+# machine as itself.  This is for security.  If you have a subnet
+# 192.168.*.* and you want to be able to use chronyc from any machine on
+# it, you could uncomment the following line.  (Edit this to your own
+# situation.)
+
+! cmdallow 192.168/16
+
+# You can add as many 'cmdallow' and 'cmddeny' lines as you like.  The
+# syntax and meaning is the same as for 'allow' and 'deny', except that
+# 'cmdallow' and 'cmddeny' control access to the chronyd's command port.
+
+# Rate limiting can be enabled also for command packets.  (Note,
+# commands from localhost are never limited.)
+
+! cmdratelimit interval -4 burst 16
+
+#######################################################################
+### HARDWARE TIMESTAMPING
+# On Linux, if the network interface controller and its driver support
+# hardware timestamping, it can significantly improve the accuracy of
+# synchronisation. It can be enabled on specified interfaces only, or it
+# can be enabled on all interfaces that support it.
+
+! hwtimestamp eth0
+! hwtimestamp *
+
+#######################################################################
+### REAL TIME CLOCK
+# chronyd can characterise the system's real-time clock.  This is the
+# clock that keeps running when the power is turned off, so that the
+# machine knows the approximate time when it boots again.  The error at
+# a particular epoch and gain/loss rate can be written to a file and
+# used later by chronyd when it is started with the '-s' option.
+#
+# You need to have 'enhanced RTC support' compiled into your Linux
+# kernel.  (Note, these options apply only to Linux.)
+
+! rtcfile /var/lib/chrony/rtc
+
+# Your RTC can be set to keep Universal Coordinated Time (UTC) or local
+# time.  (Local time means UTC +/- the effect of your timezone.)  If you
+# use UTC, chronyd will function correctly even if the computer is off
+# at the epoch when you enter or leave summer time (aka daylight saving
+# time).  However, if you dual boot your system with Microsoft Windows,
+# that will work better if your RTC maintains local time.  You take your
+# pick!
+
+! rtconutc
+
+# By default chronyd assumes that the enhanced RTC device is accessed as
+# /dev/rtc.  If it's accessed somewhere else on your system (e.g. you're
+# using devfs), uncomment and edit the following line.
+
+! rtcdevice /dev/misc/rtc
+
+# Alternatively, if not using the -s option, this directive can be used
+# to enable a mode in which the RTC is periodically set to the system
+# time, with no tracking of its drift.
+
+! rtcsync
+
+#######################################################################
+### REAL TIME SCHEDULER
+# This directive tells chronyd to use the real-time FIFO scheduler with the
+# specified priority (which must be between 0 and 100).  This should result
+# in reduced latency.  You don't need it unless you really have a requirement
+# for extreme clock stability.  Works only on Linux.  Note that the "-P"
+# command-line switch will override this.
+
+! sched_priority 1
+
+#######################################################################
+### LOCKING CHRONYD INTO RAM
+# This directive tells chronyd to use the mlockall() syscall to lock itself
+# into RAM so that it will never be paged out.  This should result in reduced
+# latency.  You don't need it unless you really have a requirement
+# for extreme clock stability.  Works only on Linux.  Note that the "-m"
+# command-line switch will also enable this feature.
+
+! lock_all
diff --git a/examples/chrony.keys.example b/examples/chrony.keys.example
new file mode 100644
index 0000000..05e720c
--- /dev/null
+++ b/examples/chrony.keys.example
@@ -0,0 +1,15 @@
+# This is an example chrony keys file.  It enables authentication of NTP
+# packets with symmetric keys when its location is specified by the keyfile
+# directive in chrony.conf(5).  It should be readable only by root and the
+# user under which chronyd is running.
+#
+# Don't use the example keys!  It's recommended to generate random keys using
+# the chronyc keygen command.
+
+# Examples of valid keys:
+
+#1 MD5 AVeryLongAndRandomPassword
+#2 MD5 HEX:12114855C7931009B4049EF3EFC48A139C3F989F
+#3 SHA1 HEX:B2159C05D6A219673A3B7E896B6DE07F6A440995
+#4 AES128 HEX:2DA837C4B6573748CA692B8C828E4891
+#5 AES256 HEX:2666B8099BFF2D5BA20876121788ED24D2BE59111B8FFB562F0F56AE6EC7246E
diff --git a/examples/chrony.logrotate b/examples/chrony.logrotate
new file mode 100644
index 0000000..2823a1a
--- /dev/null
+++ b/examples/chrony.logrotate
@@ -0,0 +1,8 @@
+/var/log/chrony/*.log {
+    missingok
+    nocreate
+    sharedscripts
+    postrotate
+        /usr/bin/chronyc cyclelogs > /dev/null 2>&1 || true
+    endscript
+}
diff --git a/examples/chrony.nm-dispatcher.dhcp b/examples/chrony.nm-dispatcher.dhcp
new file mode 100644
index 0000000..547ce83
--- /dev/null
+++ b/examples/chrony.nm-dispatcher.dhcp
@@ -0,0 +1,49 @@
+#!/bin/sh
+# This is a NetworkManager dispatcher script for chronyd to update
+# its NTP sources with servers from DHCP options passed by NetworkManager
+# in the DHCP4_NTP_SERVERS and DHCP6_DHCP6_NTP_SERVERS environment variables.
+
+export LC_ALL=C
+
+interface=$1
+action=$2
+
+chronyc=/usr/bin/chronyc
+server_options=iburst
+server_dir=/var/run/chrony-dhcp
+
+dhcp_server_file=$server_dir/$interface.sources
+dhcp_ntp_servers="$DHCP4_NTP_SERVERS $DHCP6_DHCP6_NTP_SERVERS"
+
+add_servers_from_dhcp() {
+    rm -f "$dhcp_server_file"
+    for server in $dhcp_ntp_servers; do
+        # Check for invalid characters (from the DHCPv6 NTP FQDN suboption)
+        len1=$(printf '%s' "$server" | wc -c)
+        len2=$(printf '%s' "$server" | tr -d -c 'A-Za-z0-9:.-' | wc -c)
+        if [ "$len1" -ne "$len2" ] || [ "$len2" -lt 1 ] || [ "$len2" -gt 255 ]; then
+          continue
+        fi
+
+        printf 'server %s %s\n' "$server" "$server_options" >> "$dhcp_server_file"
+    done
+    $chronyc reload sources > /dev/null 2>&1 || :
+}
+
+clear_servers_from_dhcp() {
+    if [ -f "$dhcp_server_file" ]; then
+        rm -f "$dhcp_server_file"
+        $chronyc reload sources > /dev/null 2>&1 || :
+    fi
+}
+
+mkdir -p $server_dir
+
+case "$action" in
+    up|dhcp4-change|dhcp6-change)
+        add_servers_from_dhcp;;
+    down)
+        clear_servers_from_dhcp;;
+esac
+
+exit 0
diff --git a/examples/chrony.nm-dispatcher.onoffline b/examples/chrony.nm-dispatcher.onoffline
new file mode 100644
index 0000000..18f5c3f
--- /dev/null
+++ b/examples/chrony.nm-dispatcher.onoffline
@@ -0,0 +1,29 @@
+#!/bin/sh
+# This is a NetworkManager dispatcher / networkd-dispatcher script for
+# chronyd to set its NTP sources online or offline when a network interface
+# is configured or removed
+
+export LC_ALL=C
+
+chronyc=/usr/bin/chronyc
+
+# For NetworkManager consider only selected events
+if [ $# -ge 2 ]; then
+    case "$2" in
+        up|down|connectivity-change)
+            ;;
+        dhcp4-change|dhcp6-change)
+            # Actions "up" and "connectivity-change" in some cases do not
+            # guarantee that the interface has a route (e.g. a bond).
+            # dhcp(x)-change handles at least cases that use DHCP.
+            ;;
+        *)
+            exit 0;;
+    esac
+fi
+
+# Note: for networkd-dispatcher routable.d ~= on and off.d ~= off
+
+$chronyc onoffline > /dev/null 2>&1
+
+exit 0
diff --git a/examples/chronyd-restricted.service b/examples/chronyd-restricted.service
new file mode 100644
index 0000000..30ba7d9
--- /dev/null
+++ b/examples/chronyd-restricted.service
@@ -0,0 +1,58 @@
+# This is a more restricted version of the chronyd service intended for
+# minimal NTP/NTS client configurations. The daemon is started without root
+# privileges and is allowed to write only to its own runtime, state, and log
+# directories. It cannot bind to privileged ports in order to operate as an
+# NTP server, or provide monitoring access over IPv4/IPv6. It cannot use
+# reference clocks, HW timestamping, RTC tracking, and other features.
+[Unit]
+Description=NTP client (restricted)
+Documentation=man:chronyd(8) man:chrony.conf(5)
+After=chronyd.service ntpdate.service sntp.service ntpd.service
+Conflicts=chronyd.service ntpd.service systemd-timesyncd.service
+ConditionCapability=CAP_SYS_TIME
+
+[Service]
+Type=forking
+PIDFile=/run/chrony/chronyd.pid
+EnvironmentFile=-/etc/sysconfig/chronyd
+ExecStart=/usr/sbin/chronyd -U $OPTIONS
+
+User=chrony
+LogsDirectory=chrony
+LogsDirectoryMode=0750
+RuntimeDirectory=chrony
+RuntimeDirectoryMode=0750
+RuntimeDirectoryPreserve=restart
+StateDirectory=chrony
+StateDirectoryMode=0750
+
+AmbientCapabilities=CAP_SYS_TIME
+CapabilityBoundingSet=CAP_SYS_TIME
+DevicePolicy=closed
+LockPersonality=yes
+MemoryDenyWriteExecute=yes
+NoNewPrivileges=yes
+PrivateDevices=yes
+PrivateTmp=yes
+# This breaks adjtimex()
+#PrivateUsers=yes
+ProtectControlGroups=yes
+ProtectHome=yes
+ProtectHostname=yes
+ProtectKernelLogs=yes
+ProtectKernelModules=yes
+ProtectKernelTunables=yes
+ProtectProc=invisible
+ProtectSystem=strict
+RemoveIPC=yes
+RestrictAddressFamilies=AF_INET AF_INET6 AF_UNIX
+RestrictNamespaces=yes
+RestrictRealtime=yes
+RestrictSUIDSGID=yes
+SystemCallArchitectures=native
+SystemCallFilter=~@cpu-emulation @debug @module @mount @obsolete @raw-io
+SystemCallFilter=~@reboot @resources @swap
+UMask=0077
+
+[Install]
+WantedBy=multi-user.target
diff --git a/examples/chronyd.service b/examples/chronyd.service
new file mode 100644
index 0000000..a42eb92
--- /dev/null
+++ b/examples/chronyd.service
@@ -0,0 +1,48 @@
+[Unit]
+Description=NTP client/server
+Documentation=man:chronyd(8) man:chrony.conf(5)
+After=ntpdate.service sntp.service ntpd.service
+Conflicts=ntpd.service systemd-timesyncd.service
+ConditionCapability=CAP_SYS_TIME
+
+[Service]
+Type=forking
+PIDFile=/run/chrony/chronyd.pid
+EnvironmentFile=-/etc/sysconfig/chronyd
+ExecStart=/usr/sbin/chronyd $OPTIONS
+
+CapabilityBoundingSet=~CAP_AUDIT_CONTROL CAP_AUDIT_READ CAP_AUDIT_WRITE
+CapabilityBoundingSet=~CAP_BLOCK_SUSPEND CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
+CapabilityBoundingSet=~CAP_MAC_ADMIN CAP_MAC_OVERRIDE CAP_MKNOD CAP_SYS_ADMIN
+CapabilityBoundingSet=~CAP_SYS_BOOT CAP_SYS_CHROOT CAP_SYS_MODULE CAP_SYS_PACCT
+CapabilityBoundingSet=~CAP_SYS_PTRACE CAP_SYS_RAWIO CAP_SYS_TTY_CONFIG CAP_WAKE_ALARM
+DeviceAllow=char-pps rw
+DeviceAllow=char-ptp rw
+DeviceAllow=char-rtc rw
+DevicePolicy=closed
+LockPersonality=yes
+MemoryDenyWriteExecute=yes
+NoNewPrivileges=yes
+PrivateTmp=yes
+ProtectControlGroups=yes
+ProtectHome=yes
+ProtectHostname=yes
+ProtectKernelLogs=yes
+ProtectKernelModules=yes
+ProtectKernelTunables=yes
+ProtectProc=invisible
+ProtectSystem=strict
+ReadWritePaths=/run /var/lib/chrony -/var/log
+RestrictAddressFamilies=AF_INET AF_INET6 AF_UNIX
+RestrictNamespaces=yes
+RestrictSUIDSGID=yes
+SystemCallArchitectures=native
+SystemCallFilter=~@cpu-emulation @debug @module @mount @obsolete @raw-io @reboot @swap
+
+# Adjust restrictions for /usr/sbin/sendmail (mailonchange directive)
+NoNewPrivileges=no
+ReadWritePaths=-/var/spool
+RestrictAddressFamilies=AF_NETLINK
+
+[Install]
+WantedBy=multi-user.target