diff options
Diffstat (limited to 'test/simulation/test.common')
| -rw-r--r-- | test/simulation/test.common | 539 |
1 files changed, 539 insertions, 0 deletions
diff --git a/test/simulation/test.common b/test/simulation/test.common new file mode 100644 index 0000000..42a2917 --- /dev/null +++ b/test/simulation/test.common @@ -0,0 +1,539 @@ +# Copyright (C) 2013-2014 Miroslav Lichvar <mlichvar@redhat.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +export LC_ALL=C +export PATH=../../:$PATH +export CLKNETSIM_PATH=${CLKNETSIM_PATH:-clknetsim} + +if [ ! -x $CLKNETSIM_PATH/clknetsim ]; then + echo "SKIP (clknetsim not found)" + exit 9 +fi + +. $CLKNETSIM_PATH/clknetsim.bash + +# Default test testings + +default_limit=10000 +default_primary_time_offset=0.0 +default_time_offset=1e-1 +default_freq_offset=1e-4 +default_base_delay=1e-4 +default_delay_correction="" +default_jitter=1e-4 +default_jitter_asymmetry=0.0 +default_wander=1e-9 +default_refclock_jitter="" +default_refclock_offset=0.0 + +default_update_interval=0 +default_shift_pll=2 + +default_server_strata=1 +default_servers=1 +default_clients=1 +default_peers=0 +default_falsetickers=0 +default_server_start=0.0 +default_client_start=0.0 +default_chronyc_start=1000.0 +default_server_step="" +default_client_step="" + +default_client_server_conf="" +default_server_server_options="" +default_client_server_options="" +default_server_peer_options="" +default_server_lpeer_options="" +default_server_rpeer_options="" +default_client_peer_options="" +default_client_lpeer_options="" +default_client_rpeer_options="" +default_server_conf="" +default_client_conf="" +default_chronyc_conf="" +default_server_chronyd_options="" +default_client_chronyd_options="" +default_chronyc_options="" + +default_time_max_limit=1e-3 +default_freq_max_limit=5e-4 +default_time_rms_limit=3e-4 +default_freq_rms_limit=1e-5 +default_min_sync_time=120 +default_max_sync_time=210 + +default_client_min_mean_out_interval=0.0 +default_client_max_min_out_interval=inf + +default_cmdmon_unix=1 +default_pcap_dumps=0 +default_dns=0 + +# Initialize test settings from their defaults +for defoptname in ${!default_*}; do + optname=${defoptname#default_} + [ -z "${!optname}" ] && declare "$optname"="${!defoptname}" +done + +test_start() { + rm -rf tmp/* + echo "Testing $@:" + + check_config_h 'FEAT_NTP 1' || test_skip +} + +test_pass() { + echo "PASS" + exit 0 +} + +test_fail() { + echo "FAIL" + exit 1 +} + +test_skip() { + echo "SKIP" + exit 9 +} + +test_ok() { + pad_line + echo -e "\tOK" + return 0 +} + +test_bad() { + pad_line + echo -e "\tBAD" + return 1 +} + +test_error() { + pad_line + echo -e "\tERROR" + return 1 +} + +msg_length=0 +pad_line() { + local line_length=56 + [ $msg_length -lt $line_length ] && \ + printf "%$[$line_length - $msg_length]s" "" + msg_length=0 +} + +# Print aligned message +test_message() { + local level=$1 eol=$2 + shift 2 + local msg="$*" + + while [ $level -gt 0 ]; do + echo -n " " + level=$[$level - 1] + msg_length=$[$msg_length + 2] + done + echo -n "$msg" + + msg_length=$[$msg_length + ${#msg}] + if [ $eol -ne 0 ]; then + echo + msg_length=0 + fi +} + +get_wander_expr() { + local scaled_wander + + scaled_wander=$(awk "BEGIN {print $wander / \ + sqrt($update_interval < 0 ? 2^-($update_interval) : 1)}") + + echo "(+ $freq_offset (sum (* $scaled_wander (normal))))" +} + + +get_delay_expr() { + local direction=$1 asym + + if [ $jitter_asymmetry == "0.0" ]; then + asym="" + elif [ $direction = "up" ]; then + asym=$(awk "BEGIN {print 1 - 2 * $jitter_asymmetry}") + elif [ $direction = "down" ]; then + asym=$(awk "BEGIN {print 1 + 2 * $jitter_asymmetry}") + fi + echo "(+ $base_delay (* $asym $jitter (exponential)))" +} + +get_refclock_expr() { + echo "(+ $refclock_offset (* $refclock_jitter (normal)))" +} + +get_chronyd_nodes() { + echo $[$servers * $server_strata + $clients] +} + +get_node_name() { + local index=$1 + + if [ $dns -ne 0 ]; then + echo "node$index.net1.clk" + else + echo "192.168.123.$index" + fi +} + +get_chronyd_conf() { + local i stratum=$1 peer=$2 + + if [ $stratum -eq 1 ]; then + echo "local stratum 1" + echo "$server_conf" + elif [ $stratum -le $server_strata ]; then + for i in $(seq 1 $servers); do + echo "server $(get_node_name $[$servers * ($stratum - 2) + $i]) $server_server_options" + done + for i in $(seq 1 $peers); do + [ $i -eq $peer -o $i -gt $servers ] && continue + echo -n "peer $(get_node_name $[$servers * ($stratum - 1) + $i]) $server_peer_options " + [ $i -lt $peer ] && echo "$server_lpeer_options" || echo "$server_rpeer_options" + done + echo "$server_conf" + else + echo "deny" + if [ -n "$client_server_conf" ]; then + echo "$client_server_conf" + else + for i in $(seq 1 $servers); do + echo "server $(get_node_name $[$servers * ($stratum - 2) + $i]) $client_server_options" + done + fi + for i in $(seq 1 $peers); do + [ $i -eq $peer -o $i -gt $clients ] && continue + echo -n "peer $(get_node_name $[$servers * ($stratum - 1) + $i]) $client_peer_options " + [ $i -lt $peer ] && echo "$client_lpeer_options" || echo "$client_rpeer_options" + done + echo "$client_conf" + fi +} + +# Check if chrony was built with specified option in config.h +check_config_h() { + local pattern=$1 + grep -q "^#define $pattern" ../../config.h +} + +# Check if the clock was well synchronized +check_sync() { + local i sync_time max_time_error max_freq_error ret=0 + local rms_time_error rms_freq_error + + test_message 2 1 "checking clock sync time, max/rms time/freq error:" + + for i in $(seq 1 $(get_chronyd_nodes)); do + [ $i -gt $[$servers * $server_strata] ] || continue + + sync_time=$(find_sync tmp/log.offset tmp/log.freq $i \ + $time_max_limit $freq_max_limit 1.0) + max_time_error=$(get_stat 'Maximum absolute offset' $i) + max_freq_error=$(get_stat 'Maximum absolute frequency' $i) + rms_time_error=$(get_stat 'RMS offset' $i) + rms_freq_error=$(get_stat 'RMS frequency' $i) + + test_message 3 0 "node $i: $sync_time $(printf '%.2e %.2e %.2e %.2e' \ + $max_time_error $max_freq_error $rms_time_error $rms_freq_error)" + + check_stat $sync_time $min_sync_time $max_sync_time && \ + check_stat $max_time_error 0.0 $time_max_limit && \ + check_stat $max_freq_error 0.0 $freq_max_limit && \ + check_stat $rms_time_error 0.0 $time_rms_limit && \ + check_stat $rms_freq_error 0.0 $freq_rms_limit && \ + test_ok || test_bad + + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check if chronyd exited properly +check_chronyd_exit() { + local i ret=0 + + test_message 2 1 "checking chronyd exit:" + + for i in $(seq 1 $(get_chronyd_nodes)); do + test_message 3 0 "node $i:" + + grep -q 'chronyd exiting' tmp/log.$i && \ + ! grep -q 'Adjustment.*exceeds.*exiting' tmp/log.$i && \ + ! grep -q 'Assertion.*failed' tmp/log.$i && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check for problems in source selection +check_source_selection() { + local i ret=0 + + test_message 2 1 "checking source selection:" + + for i in $(seq $[$servers * $server_strata + 1] $(get_chronyd_nodes)); do + test_message 3 0 "node $i:" + + ! grep -q 'no majority\|no selectable sources' tmp/log.$i && \ + grep -q 'Selected source' tmp/log.$i && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check if incoming and outgoing packet intervals are sane +check_packet_interval() { + local i ret=0 mean_in_interval mean_out_interval min_in_interval min_out_interval + + test_message 2 1 "checking mean/min incoming/outgoing packet interval:" + + for i in $(seq 1 $(get_chronyd_nodes)); do + mean_in_interval=$(get_stat 'Mean incoming packet interval' $i) + mean_out_interval=$(get_stat 'Mean outgoing packet interval' $i) + min_in_interval=$(get_stat 'Minimum incoming packet interval' $i) + min_out_interval=$(get_stat 'Minimum outgoing packet interval' $i) + + test_message 3 0 "node $i: $(printf '%.2e %.2e %.2e %.2e' \ + $mean_in_interval $mean_out_interval $min_in_interval $min_out_interval)" + + # Check that the mean intervals are non-zero and shorter than + # limit, incoming is not longer than outgoing for stratum 1 + # servers, outgoing is not longer than incoming for clients, + # and the minimum outgoing interval is not shorter than the NTP + # sampling separation or iburst interval for clients + nodes=$[$servers * $server_strata + $clients] + check_stat $mean_in_interval 0.1 inf && \ + check_stat $mean_out_interval 0.1 inf && \ + ([ $i -gt $servers ] || \ + check_stat $mean_in_interval 0.0 $mean_out_interval 10*$jitter) && \ + ([ $i -le $[$servers * $server_strata] ] || \ + check_stat $mean_out_interval $client_min_mean_out_interval \ + $mean_in_interval 10*$jitter) && \ + ([ $i -le $[$servers * $server_strata] ] || \ + check_stat $min_out_interval \ + $([ $servers -gt 1 ] && echo 0.18 || echo 1.8) \ + $client_max_min_out_interval) && \ + test_ok || test_bad + + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Compare chronyc output with specified pattern +check_chronyc_output() { + local i ret=0 pattern=$1 + + test_message 2 1 "checking chronyc output:" + + for i in $(seq $[$(get_chronyd_nodes) + 1] $[$(get_chronyd_nodes) + $clients]); do + test_message 3 0 "node $i:" + + [[ "$(cat tmp/log.$i)" =~ $pattern ]] && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check the number of messages matching a pattern in the client logs +check_log_messages() { + local i count ret=0 pattern=$1 min=$2 max=$3 + + test_message 2 1 "checking number of messages \"$pattern\":" + + for i in $(seq $[$servers * $server_strata + 1] $(get_chronyd_nodes)); do + count=$(grep "$pattern" tmp/log.$i | wc -l) + test_message 3 0 "node $i: $count" + + [ "$min" -le "$count" ] && [ "$count" -le "$max" ] && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check the number of messages matching a pattern in a specified file +check_file_messages() { + local i count ret=0 pattern=$1 min=$2 max=$3 + shift 3 + + test_message 2 1 "checking number of messages \"$pattern\":" + + for i; do + count=$(grep "$pattern" tmp/$i | wc -l) + test_message 3 0 "$i: $count" + + [ "$min" -le "$count" ] && [ "$count" -le "$max" ] && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Check if only NTP port (123) was used +check_packet_port() { + local i ret=0 port=123 + + test_message 2 1 "checking port numbers in packet log:" + + for i in $(seq 1 $(get_chronyd_nodes)); do + test_message 3 0 "node $i:" + + grep -E -q "^([0-9e.+-]+ ){5}$port " tmp/log.packets && \ + ! grep -E "^[0-9e.+-]+ $i " tmp/log.packets | \ + grep -E -q -v "^([0-9e.+-]+ ){5}$port " && \ + test_ok || test_bad + [ $? -eq 0 ] || ret=1 + done + + return $ret +} + +# Print test settings which differ from default value +print_nondefaults() { + local defoptname optname + + test_message 2 1 "non-default settings:" + for defoptname in ${!default_*}; do + optname=${defoptname#default_} + [ "${!defoptname}" = "${!optname}" ] || \ + test_message 3 1 $optname=${!optname} + done +} + +run_simulation() { + local nodes=$1 + + test_message 2 0 "running simulation:" + + start_server $nodes \ + -n 2 \ + -o tmp/log.offset -f tmp/log.freq -p tmp/log.packets \ + -R $(awk "BEGIN {print $update_interval < 0 ? 2^-($update_interval) : 1}") \ + -r $(awk "BEGIN {print $max_sync_time * 2^$update_interval}") \ + -l $(awk "BEGIN {print $limit * 2^$update_interval}") && test_ok || test_error +} + +run_test() { + local i j n stratum node nodes step start freq offset conf options + + test_message 1 1 "network with $servers*$server_strata servers and $clients clients:" + print_nondefaults + + nodes=$(get_chronyd_nodes) + [ -n "$chronyc_conf" ] && nodes=$[$nodes + $clients] + + export CLKNETSIM_UNIX_SUBNET=$[$cmdmon_unix != 0 ? 2 : 0] + + for i in $(seq 1 $nodes); do + echo "node${i}_shift_pll = $shift_pll" + for j in $(seq 1 $nodes); do + echo "node${i}_delay${j} = $(get_delay_expr up)" + echo "node${j}_delay${i} = $(get_delay_expr down)" + if [ -n "$delay_correction" ]; then + echo "node${i}_delay_correction${j} = $delay_correction" + echo "node${j}_delay_correction${i} = $delay_correction" + fi + done + done > tmp/conf + + node=1 + + for stratum in $(seq 1 $[$server_strata + 1]); do + [ $stratum -le $server_strata ] && n=$servers || n=$clients + + for i in $(seq 1 $n); do + test_message 2 0 "starting node $node:" + + [ $pcap_dumps -ne 0 ] && export CLKNETSIM_PCAP_DUMP=tmp/pcap.$node + + if [ $stratum -eq 1 ]; then + step=$server_step + start=$server_start + freq="" + [ $i -le $falsetickers ] && + offset=$i.0 || offset=$primary_time_offset + options=$server_chronyd_options + elif [ $stratum -le $server_strata ]; then + step=$server_step + start=$server_start + freq=$(get_wander_expr) + offset=0.0 + options=$server_chronyd_options + else + step=$client_step + start=$client_start + freq=$(get_wander_expr) + offset=$time_offset + options=$client_chronyd_options + fi + + conf=$(get_chronyd_conf $stratum $i $n) + + [ -z "$freq" ] || echo "node${node}_freq = $freq" >> tmp/conf + [ -z "$step" ] || echo "node${node}_step = $step" >> tmp/conf + [ -z "$refclock_jitter" ] || \ + echo "node${node}_refclock = $(get_refclock_expr)" >> tmp/conf + echo "node${node}_offset = $offset" >> tmp/conf + echo "node${node}_start = $start" >> tmp/conf + start_client $node chronyd "$conf" "" "$options" && \ + test_ok || test_error + + [ $? -ne 0 ] && return 1 + node=$[$node + 1] + done + done + + for i in $(seq 1 $[$nodes - $node + 1]); do + test_message 2 0 "starting node $node:" + + [ $pcap_dumps -ne 0 ] && export CLKNETSIM_PCAP_DUMP=tmp/pcap.$node + + options=$([ $dns -eq 0 ] && printf "%s" "-n") + if [ $cmdmon_unix -ne 0 ]; then + options+=" -h /clknetsim/unix/$[$node - $clients]:1" + else + options+=" -h $(get_node_name $[$node - $clients])" + fi + + echo "node${node}_start = $chronyc_start" >> tmp/conf + start_client $node chronyc "$chronyc_conf" "" "$options $chronyc_options" && \ + test_ok || test_error + + [ $? -ne 0 ] && return 1 + node=$[$node + 1] + done + + run_simulation $nodes +} |