diff options
Diffstat (limited to 'doc/stonith/README.ippower9258')
| -rw-r--r-- | doc/stonith/README.ippower9258 | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/doc/stonith/README.ippower9258 b/doc/stonith/README.ippower9258 new file mode 100644 index 0000000..6873efd --- /dev/null +++ b/doc/stonith/README.ippower9258 @@ -0,0 +1,68 @@ +IP Power 9258 as external stonith device. +========================================= + +Device Information +================== + + Warning: + ======== + + Aviosys provides different types and versions of IP Power 9258. + The device is currently available with four or eight power outlets. + This script was tested with firmware version: V1.55 2009/12/22 + + Especially "IP Power 9258 HP" uses a different http command interface. + ====================================================================== + + Resources for device documentation: + + Manufacturer URL: http://www.aviosys.com/ippower9258.htm + Manual URL: http://www.aviosys.com/manual.htm + Manual current version URL: + http://www.aviosys.com/images/9258_manual_20081104.pdf + +The documentation of the http command interface defines three +supported commands: + + GetPower - useful for testing status of the device and of each port + SetPower - used to control status of each power outlet + SetSchedule+Power - useless for stonith + +Common documented structure of these three commands is + + http://username:password@a.b.c.d/Set.cmd?CMD=command[+param=value...] + param is one or more of P60 to P67 and value is 0 or 1 + expected response for GetPower is of the format + <html>P60=1,P61=0,P62=1,P63=1,P64=0,P65=0,P66=0,P67=0</html> + SetPower does respond with the same format but restricts the list + to the modified ports. + P60 to P67 represent the status of the power outlet 1 to 8: 0 <=> + power off; 1 <=> power on. + +IP Power 9258 allows to assign port names (pw1Name to pw8Name) to each +port. These names can be used with the web interface (web form with +post-method). + +Script specific notes +===================== + +There is no documented http command to retrieve port names via the +http command interface. We try to get the hostlist via the web +interface. + +This script assumes a one to one mapping between names of hostlist and +port attributes of power outlet: + + 1st hostname in hostlist connected to 1st power outlet with port + status P60 and port name pw1Name. + ... + 8th hostname in hostlist connected to 8th power outlet with port + status P67 and port name pw8Name. + +If the hostlist parameter is not defined, then all assigned outlets +are inserted into the hostlist. Unused outlets should have empty +names. The node names obviously have to match the corresponding outlet +names. A reserved hostname is "*not-defined*". This is a +sript-internal placeholder for unused outlets. It does not appear in +the hostlist. + |