Adding upstream version 3.1.8.upstream/3.1.8upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1138 insertions, 0 deletions

diff --git a/init/Makefile.am b/init/Makefile.am
new file mode 100644
index 0000000..4219995
--- /dev/null
+++ b/init/Makefile.am
@@ -0,0 +1,65 @@
+# Copyright (c) 2004 MontaVista Software, Inc.
+# Copyright (c) 2009 Red Hat, Inc.
+#
+# Authors: Steven Dake (sdake@redhat.com)
+#          Fabio M. Di Nitto (fdinitto@redhat.com)
+#
+# All rights reserved.
+#
+# This software licensed under BSD license, the text of which follows:
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# - Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# - Neither the name of the MontaVista Software, Inc. nor the names of its
+#   contributors may be used to endorse or promote products derived from this
+#   software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+# THE POSSIBILITY OF SUCH DAMAGE.
+
+MAINTAINERCLEANFILES	= Makefile.in
+
+EXTRA_DIST		= corosync.in corosync-notifyd.in corosync.service.in \
+                          corosync-notifyd.service.in \
+                          corosync.sysconfig.example
+
+if INSTALL_SYSTEMD
+systemdconfdir	   = $(SYSTEMDDIR)
+systemdconf_DATA   = corosync.service corosync-notifyd.service
+else
+initscriptdir	   = $(INITDDIR)
+initscript_SCRIPTS  = corosync corosync-notifyd
+endif
+
+%: %.in Makefile
+	rm -f $@-t $@
+	cat $< | $(SED) \
+		-e 's#@''SBINDIR@#$(sbindir)#g' \
+		-e 's#@''BINDIR@#$(bindir)#g' \
+		-e 's#@''SYSCONFDIR@#$(sysconfdir)#g' \
+		-e 's#@''INITCONFIGDIR@#$(INITCONFIGDIR)#g' \
+		-e 's#@''INITDDIR@#$(INITDDIR)#g' \
+		-e 's#@''LOCALSTATEDIR@#$(localstatedir)#g' \
+		-e 's#@''BASHPATH@#${BASHPATH}#g' \
+	    > $@-t
+	mv $@-t $@
+
+all-local: $(initscript_SCRIPTS) $(systemdconf_DATA)
+
+clean-local:
+	rm -rf $(initscript_SCRIPTS) $(systemdconf_DATA)
diff --git a/init/Makefile.in b/init/Makefile.in
new file mode 100644
index 0000000..69f5800
--- /dev/null
+++ b/init/Makefile.in
@@ -0,0 +1,635 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright (c) 2004 MontaVista Software, Inc.
+# Copyright (c) 2009 Red Hat, Inc.
+#
+# Authors: Steven Dake (sdake@redhat.com)
+#          Fabio M. Di Nitto (fdinitto@redhat.com)
+#
+# All rights reserved.
+#
+# This software licensed under BSD license, the text of which follows:
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# - Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# - Neither the name of the MontaVista Software, Inc. nor the names of its
+#   contributors may be used to endorse or promote products derived from this
+#   software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+# THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = init
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/lib/libcfg.verso $(top_srcdir)/lib/libcpg.verso \
+	$(top_srcdir)/lib/libquorum.verso \
+	$(top_srcdir)/lib/libsam.verso \
+	$(top_srcdir)/lib/libvotequorum.verso \
+	$(top_srcdir)/lib/libcmap.verso $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/corosync/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(initscriptdir)" \
+	"$(DESTDIR)$(systemdconfdir)"
+SCRIPTS = $(initscript_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(systemdconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUGTOOL = @AUGTOOL@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASHPATH = @BASHPATH@
+BINDGEN = @BINDGEN@
+CARGO = @CARGO@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFG_SONAME = @CFG_SONAME@
+CFLAGS = @CFLAGS@
+CLIPPY = @CLIPPY@
+CMAP_SONAME = @CMAP_SONAME@
+COROSYSCONFDIR = @COROSYSCONFDIR@
+CPG_SONAME = @CPG_SONAME@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+GROFF = @GROFF@
+INITCONFIGDIR = @INITCONFIGDIR@
+INITDDIR = @INITDDIR@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBQB_CFLAGS = @LIBQB_CFLAGS@
+LIBQB_LIBS = @LIBQB_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LINT_FLAGS = @LINT_FLAGS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LOGDIR = @LOGDIR@
+LOGROTATEDIR = @LOGROTATEDIR@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+QUORUM_SONAME = @QUORUM_SONAME@
+RANLIB = @RANLIB@
+RUSTC = @RUSTC@
+RUSTDOC = @RUSTDOC@
+RUSTFMT = @RUSTFMT@
+RUST_FLAGS = @RUST_FLAGS@
+RUST_TARGET_DIR = @RUST_TARGET_DIR@
+SAM_SONAME = @SAM_SONAME@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SNMPCONFIG = @SNMPCONFIG@
+SNMP_LIBS = @SNMP_LIBS@
+SOMAJOR = @SOMAJOR@
+SOMICRO = @SOMICRO@
+SOMINOR = @SOMINOR@
+SONAME = @SONAME@
+STRIP = @STRIP@
+SYSTEMDDIR = @SYSTEMDDIR@
+VERSCRIPT_LDFLAGS = @VERSCRIPT_LDFLAGS@
+VERSION = @VERSION@
+VOTEQUORUM_SONAME = @VOTEQUORUM_SONAME@
+WITH_LIST = @WITH_LIST@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+corosyncrustver = @corosyncrustver@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+knet_CFLAGS = @knet_CFLAGS@
+knet_LIBS = @knet_LIBS@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libsystemd_CFLAGS = @libsystemd_CFLAGS@
+libsystemd_LIBS = @libsystemd_LIBS@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+nozzle_CFLAGS = @nozzle_CFLAGS@
+nozzle_LIBS = @nozzle_LIBS@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+statgrab_CFLAGS = @statgrab_CFLAGS@
+statgrab_LIBS = @statgrab_LIBS@
+statgrabge090_CFLAGS = @statgrabge090_CFLAGS@
+statgrabge090_LIBS = @statgrabge090_LIBS@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = Makefile.in
+EXTRA_DIST = corosync.in corosync-notifyd.in corosync.service.in \
+                          corosync-notifyd.service.in \
+                          corosync.sysconfig.example
+
+@INSTALL_SYSTEMD_TRUE@systemdconfdir = $(SYSTEMDDIR)
+@INSTALL_SYSTEMD_TRUE@systemdconf_DATA = corosync.service corosync-notifyd.service
+@INSTALL_SYSTEMD_FALSE@initscriptdir = $(INITDDIR)
+@INSTALL_SYSTEMD_FALSE@initscript_SCRIPTS = corosync corosync-notifyd
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign init/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign init/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-initscriptSCRIPTS: $(initscript_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(initscript_SCRIPTS)'; test -n "$(initscriptdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(initscriptdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(initscriptdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(initscriptdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(initscriptdir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-initscriptSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(initscript_SCRIPTS)'; test -n "$(initscriptdir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(initscriptdir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-systemdconfDATA: $(systemdconf_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(systemdconf_DATA)'; test -n "$(systemdconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(systemdconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(systemdconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemdconfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(systemdconfdir)" || exit $$?; \
+	done
+
+uninstall-systemdconfDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(systemdconf_DATA)'; test -n "$(systemdconfdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(systemdconfdir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(DATA) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(initscriptdir)" "$(DESTDIR)$(systemdconfdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-initscriptSCRIPTS install-systemdconfDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-initscriptSCRIPTS uninstall-systemdconfDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-libtool clean-local cscopelist-am ctags-am distclean \
+	distclean-generic distclean-libtool distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-initscriptSCRIPTS install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip install-systemdconfDATA installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+	uninstall-am uninstall-initscriptSCRIPTS \
+	uninstall-systemdconfDATA
+
+
+%: %.in Makefile
+	rm -f $@-t $@
+	cat $< | $(SED) \
+		-e 's#@''SBINDIR@#$(sbindir)#g' \
+		-e 's#@''BINDIR@#$(bindir)#g' \
+		-e 's#@''SYSCONFDIR@#$(sysconfdir)#g' \
+		-e 's#@''INITCONFIGDIR@#$(INITCONFIGDIR)#g' \
+		-e 's#@''INITDDIR@#$(INITDDIR)#g' \
+		-e 's#@''LOCALSTATEDIR@#$(localstatedir)#g' \
+		-e 's#@''BASHPATH@#${BASHPATH}#g' \
+	    > $@-t
+	mv $@-t $@
+
+all-local: $(initscript_SCRIPTS) $(systemdconf_DATA)
+
+clean-local:
+	rm -rf $(initscript_SCRIPTS) $(systemdconf_DATA)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/init/corosync-notifyd.in b/init/corosync-notifyd.in
new file mode 100755
index 0000000..5f36b9a
--- /dev/null
+++ b/init/corosync-notifyd.in
@@ -0,0 +1,150 @@
+#!@BASHPATH@
+
+# Authors:
+#  Angus Salkeld <asalkeld@redhat.com>
+#
+# License: Revised BSD
+
+# chkconfig: - 23 77
+# description: Corosync Dbus and snmp notifier
+# processname: corosync-notifyd
+#
+### BEGIN INIT INFO
+# Provides:		corosync-notifyd
+# Required-Start:	corosync cman
+# Required-Stop:	corosync cman
+# Default-Start:
+# Default-Stop:
+# Short-Description:	Starts and stops Corosync Notifier.
+# Description:		Starts and stops Corosync Notifier.
+### END INIT INFO
+
+desc="Corosync Notifier"
+prog="corosync-notifyd"
+
+# set secure PATH
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:@SBINDIR@"
+
+success()
+{
+	echo -ne "[  OK  ]\r"
+}
+
+failure()
+{
+	echo -ne "[FAILED]\r"
+}
+
+status()
+{
+	pid=$(pidof $1 2>/dev/null)
+	rtrn=$?
+	if [ $rtrn -ne 0 ]; then
+		echo "$1 is stopped"
+	else
+		echo "$1 (pid $pid) is running..."
+	fi
+	return $rtrn
+}
+
+[ -f @INITCONFIGDIR@/$prog ] && . @INITCONFIGDIR@/$prog
+
+case '@INITCONFIGDIR@' in
+    */sysconfig) # rpm based distros
+	[ -f @INITDDIR@/functions ] && . @INITDDIR@/functions
+	[ -z "$LOCK_FILE" ] && LOCK_FILE="@LOCALSTATEDIR@/lock/subsys/$prog";;
+    */default) # deb based distros
+	[ -z "$LOCK_FILE" ] && LOCK_FILE="@LOCALSTATEDIR@/lock/$prog";;
+esac
+
+# The version of __pids_pidof in /etc/init.d/functions calls pidof with -x
+# This means it matches scripts, including this one.
+# Redefine it here so that status (from the same file) works.
+# Otherwise simultaneous calls to stop() will loop forever
+__pids_pidof() {
+        pidof -c -o $$ -o $PPID -o %PPID "$1" || \
+                pidof -c -o $$ -o $PPID -o %PPID "${1##*/}"
+}
+
+start()
+{
+	echo -n "Starting $desc ($prog): "
+
+	# most recent distributions use tmpfs for @LOCALSTATEDIR@/run
+	# to avoid to clean it up on every boot.
+	# they also assume that init scripts will create
+	# required subdirectories for proper operations
+	mkdir -p @LOCALSTATEDIR@/run
+
+	if status $prog > /dev/null 2>&1; then
+		success
+	else
+		$prog $OPTIONS > /dev/null 2>&1
+
+		# give it time to fail
+		sleep 2
+		if status $prog > /dev/null 2>&1; then
+			touch $LOCK_FILE
+			success
+		else
+			failure
+			rtrn=1
+		fi
+	fi
+	echo
+}
+
+stop()
+{
+	! status $prog > /dev/null 2>&1 && return
+
+	echo -n "Signaling $desc ($prog) to terminate: "
+	kill -TERM "$(pidof $prog)" > /dev/null 2>&1
+	success
+	echo
+
+	echo -n "Waiting for $prog services to unload:"
+	while status $prog > /dev/null 2>&1; do
+		sleep 1
+		echo -n "."
+	done
+
+	rm -f $LOCK_FILE
+	success
+	echo
+}
+
+restart()
+{
+	stop
+	start
+}
+
+rtrn=0
+
+case "$1" in
+start)
+	start
+;;
+restart|reload|force-reload)
+	restart
+;;
+condrestart|try-restart)
+	if status $prog > /dev/null 2>&1; then
+		restart
+	fi
+;;
+status)
+	status $prog
+	rtrn=$?
+;;
+stop)
+	stop
+;;
+*)
+	echo "usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
+	rtrn=2
+;;
+esac
+
+exit $rtrn
diff --git a/init/corosync-notifyd.service.in b/init/corosync-notifyd.service.in
new file mode 100644
index 0000000..410a683
--- /dev/null
+++ b/init/corosync-notifyd.service.in
@@ -0,0 +1,14 @@
+[Unit]
+Description=Corosync Dbus and snmp notifier
+Documentation=man:corosync-notifyd
+Requires=corosync.service
+After=corosync.service
+
+[Service]
+EnvironmentFile=-@INITCONFIGDIR@/corosync-notifyd
+ExecStart=@SBINDIR@/corosync-notifyd -f $OPTIONS
+Type=notify
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
diff --git a/init/corosync.in b/init/corosync.in
new file mode 100755
index 0000000..30a0683
--- /dev/null
+++ b/init/corosync.in
@@ -0,0 +1,230 @@
+#!@BASHPATH@
+
+# Authors:
+#  Andrew Beekhof <abeekhof@redhat.com>
+#  Fabio M. Di Nitto <fdinitto@redhat.com>
+#
+# License: Revised BSD
+
+# chkconfig: - 20 80
+# description: Corosync Cluster Engine
+# processname: corosync
+#
+### BEGIN INIT INFO
+# Provides:		corosync
+# Required-Start:	$network $syslog
+# Required-Stop:	$network $syslog
+# Default-Start:
+# Default-Stop:
+# Short-Description:	Starts and stops Corosync Cluster Engine.
+# Description:		Starts and stops Corosync Cluster Engine.
+### END INIT INFO
+
+desc="Corosync Cluster Engine"
+prog="corosync"
+prog_pid_file="@LOCALSTATEDIR@/run/$prog.pid"
+
+# set secure PATH
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:@SBINDIR@"
+
+success()
+{
+	echo -ne "[  OK  ]\r"
+}
+
+failure()
+{
+	echo -ne "[FAILED]\r"
+}
+
+warning()
+{
+	echo -ne "[WARNING]\r"
+}
+
+# pid_var_run pid_file
+# Echo pid from given pid_file.
+# Returns LSB exit code for the 'status' action.
+pid_var_run()
+{
+	local pid_file="$1"
+	local pid
+
+	if [ -f "$pid_file" ]; then
+		[ ! -r "$pid_file" ] && return 4
+		pid=$(cat "$pid_file")
+		[ -z "$pid" ] && return 1
+		[ -n "${pid//[0-9]/}" ] && return 1
+		if kill -n 0 "$pid" 2>/dev/null;then
+			echo "$pid"
+			return 0
+		else
+			return 1
+		fi
+	fi
+
+	return 3
+}
+
+# status [-p pid_file] {program}
+status()
+{
+	local pid_file
+
+	if [ "$1" = "-p" ]; then
+		pid_file=$2
+		shift 2
+	fi
+
+	pid=$(pid_var_run "$pid_file" 2>/dev/null)
+	res=$?
+	if [ $res -ne 0 -a -z "$pid_file" ]; then
+		pid=$(__pids_pidof "$1")
+		[ -n "$pid" ]
+		res=$?
+	fi
+
+	if [ $res -ne 0 ]; then
+		echo "$1 is stopped"
+	else
+		echo "$1 (pid $pid) is running..."
+	fi
+	return $res
+}
+
+[ -f @INITCONFIGDIR@/$prog ] && . @INITCONFIGDIR@/$prog
+
+case '@INITCONFIGDIR@' in
+    */sysconfig) # rpm based distros
+	[ -f @INITDDIR@/functions ] && . @INITDDIR@/functions
+	[ -z "$LOCK_FILE" ] && LOCK_FILE="@LOCALSTATEDIR@/lock/subsys/$prog";;
+    */default) # deb based distros
+	[ -z "$LOCK_FILE" ] && LOCK_FILE="@LOCALSTATEDIR@/lock/$prog";;
+esac
+
+# The version of __pids_pidof in /etc/init.d/functions calls pidof with -x
+# This means it matches scripts, including this one.
+# Redefine it here so that status (from the same file) works.
+# Otherwise simultaneous calls to stop() will loop forever
+__pids_pidof() {
+        pidof -c -o $$ -o $PPID -o %PPID "$1" || \
+                pidof -c -o $$ -o $PPID -o %PPID "${1##*/}"
+}
+
+cluster_disabled_at_boot()
+{
+       if grep -q nocluster /proc/cmdline && \
+          [ "$(tty)" = "/dev/console" ]; then
+               echo -e "not configured to run at boot"
+               failure
+               return 1
+       fi
+       return 0
+}
+
+wait_for_ipc()
+{
+	try=0
+	max_try=$((COROSYNC_INIT_TIMEOUT*2-1))
+	[ "$max_try" -le "0" ] && max_try=120
+
+	while [ "$try" -le "$max_try" ]; do
+		if corosync-cpgtool > /dev/null 2>&1; then
+			return 0
+		fi
+		sleep 0.5
+		try=$((try + 1))
+	done
+
+	return 1
+}
+
+start()
+{
+	echo -n "Starting $desc ($prog): "
+
+	! cluster_disabled_at_boot && return
+
+	# most recent distributions use tmpfs for @LOCALSTATEDIR@/run
+	# to avoid to clean it up on every boot.
+	# they also assume that init scripts will create
+	# required subdirectories for proper operations
+	mkdir -p @LOCALSTATEDIR@/run
+
+	if status -p "$prog_pid_file" "$prog" > /dev/null 2>&1; then
+		success
+	else
+		$prog $COROSYNC_OPTIONS > /dev/null 2>&1
+
+		if [ "$?" != 0 ] || ! wait_for_ipc; then
+			failure
+			rtrn=1
+		else
+			touch $LOCK_FILE
+			if corosync-cfgtool -s > /dev/null 2>&1; then
+				success
+			else
+				warning
+			fi
+		fi
+	fi
+	echo
+}
+
+stop()
+{
+	! status -p "$prog_pid_file" "$prog" > /dev/null 2>&1 && return
+
+	echo -n "Signaling $desc ($prog) to terminate: "
+	# Call cfgtool to trigger shutdown callbacks
+	corosync-cfgtool -H --force > /dev/null 2>&1
+	# Send TERM signal (if cfgtool -H failed)
+	kill -TERM "$(pid_var_run $prog_pid_file)" > /dev/null 2>&1
+	success
+	echo
+
+	echo -n "Waiting for $prog services to unload:"
+	while status -p "$prog_pid_file" "$prog" > /dev/null 2>&1; do
+		sleep 1
+		echo -n "."
+	done
+
+	rm -f $LOCK_FILE
+	success
+	echo
+}
+
+restart()
+{
+	stop
+	start
+}
+
+rtrn=0
+
+case "$1" in
+start)
+	start
+;;
+restart|reload|force-reload)
+	restart
+;;
+condrestart|try-restart)
+	if status -p "$prog_pid_file" "$prog" > /dev/null 2>&1; then
+		restart
+	fi
+;;
+status)
+	status -p "$prog_pid_file" "$prog"
+	rtrn=$?
+;;
+stop)
+	stop
+;;
+*)
+	echo "usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
+	rtrn=2
+;;
+esac
+
+exit $rtrn
diff --git a/init/corosync.service.in b/init/corosync.service.in
new file mode 100644
index 0000000..bd2a48a
--- /dev/null
+++ b/init/corosync.service.in
@@ -0,0 +1,34 @@
+[Unit]
+Description=Corosync Cluster Engine
+Documentation=man:corosync man:corosync.conf man:corosync_overview
+ConditionKernelCommandLine=!nocluster
+Requires=network-online.target
+After=network-online.target
+
+[Service]
+EnvironmentFile=-@INITCONFIGDIR@/corosync
+ExecStart=@SBINDIR@/corosync -f $COROSYNC_OPTIONS
+ExecStop=@SBINDIR@/corosync-cfgtool -H --force
+Type=notify
+
+# In typical systemd deployments, both standard outputs are forwarded to
+# journal (stderr is what's relevant in the pristine corosync configuration),
+# which hazards a message redundancy since the syslog stream usually ends there
+# as well; before editing this line, you may want to check DefaultStandardError
+# in systemd-system.conf(5) and whether /dev/log is a systemd related symlink.
+StandardError=null
+
+# The following config is for corosync with enabled watchdog service.
+#
+#  When corosync watchdog service is being enabled and using with
+#  pacemaker.service, and if you want to exert the watchdog when a
+#  corosync process is terminated abnormally,
+#  uncomment the line of the following Restart= and RestartSec=.
+#Restart=on-failure
+#  Specify a period longer than soft_margin as RestartSec.
+#RestartSec=70
+#  rewrite according to environment.
+#ExecStartPre=/sbin/modprobe softdog
+
+[Install]
+WantedBy=multi-user.target
diff --git a/init/corosync.sysconfig.example b/init/corosync.sysconfig.example
new file mode 100644
index 0000000..b0050e3
--- /dev/null
+++ b/init/corosync.sysconfig.example
@@ -0,0 +1,10 @@
+# Corosync init script configuration file
+
+# COROSYNC_INIT_TIMEOUT specifies number of seconds to wait for corosync
+# initialization (default is one minute).
+COROSYNC_INIT_TIMEOUT=60
+
+# COROSYNC_OPTIONS specifies options passed to corosync command
+# (default is no options).
+# See "man corosync" for detailed descriptions of the options.
+COROSYNC_OPTIONS=""