Adding upstream version 1:2.3.21+dfsg1.upstream/1%2.3.21+dfsg1

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 1758 insertions, 0 deletions

diff --git a/pigeonhole/doc/example-config/Makefile.am b/pigeonhole/doc/example-config/Makefile.am
new file mode 100644
index 0000000..f30c9fb
--- /dev/null
+++ b/pigeonhole/doc/example-config/Makefile.am
@@ -0,0 +1,10 @@
+SUBDIRS = conf.d
+
+pkgsysconfdir = $(sysconfdir)/dovecot
+
+exampledir = $(dovecot_docdir)/example-config
+example_DATA = \
+	sieve-ldap.conf 
+
+EXTRA_DIST = \
+        $(example_DATA)
diff --git a/pigeonhole/doc/example-config/Makefile.in b/pigeonhole/doc/example-config/Makefile.in
new file mode 100644
index 0000000..af6460c
--- /dev/null
+++ b/pigeonhole/doc/example-config/Makefile.in
@@ -0,0 +1,755 @@
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc/example-config
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dovecot.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/dummy-config.h \
+	$(top_builddir)/pigeonhole-config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(exampledir)"
+DATA = $(example_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BINARY_CFLAGS = @BINARY_CFLAGS@
+BINARY_LDFLAGS = @BINARY_LDFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@
+DLLTOOL = @DLLTOOL@
+DOVECOT_BINARY_CFLAGS = @DOVECOT_BINARY_CFLAGS@
+DOVECOT_BINARY_LDFLAGS = @DOVECOT_BINARY_LDFLAGS@
+DOVECOT_CFLAGS = @DOVECOT_CFLAGS@
+DOVECOT_COMPRESS_LIBS = @DOVECOT_COMPRESS_LIBS@
+DOVECOT_INSTALLED = @DOVECOT_INSTALLED@
+DOVECOT_LIBS = @DOVECOT_LIBS@
+DOVECOT_LUA_CFLAGS = @DOVECOT_LUA_CFLAGS@
+DOVECOT_LUA_LIBS = @DOVECOT_LUA_LIBS@
+DOVECOT_SQL_LIBS = @DOVECOT_SQL_LIBS@
+DOVECOT_SSL_LIBS = @DOVECOT_SSL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDAP_LIBS = @LDAP_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBDOVECOT = @LIBDOVECOT@
+LIBDOVECOT_ACL_INCLUDE = @LIBDOVECOT_ACL_INCLUDE@
+LIBDOVECOT_AUTH_INCLUDE = @LIBDOVECOT_AUTH_INCLUDE@
+LIBDOVECOT_COMPRESS = @LIBDOVECOT_COMPRESS@
+LIBDOVECOT_COMPRESS_DEPS = @LIBDOVECOT_COMPRESS_DEPS@
+LIBDOVECOT_CONFIG_INCLUDE = @LIBDOVECOT_CONFIG_INCLUDE@
+LIBDOVECOT_DEPS = @LIBDOVECOT_DEPS@
+LIBDOVECOT_DOVEADM_INCLUDE = @LIBDOVECOT_DOVEADM_INCLUDE@
+LIBDOVECOT_DSYNC = @LIBDOVECOT_DSYNC@
+LIBDOVECOT_DSYNC_DEPS = @LIBDOVECOT_DSYNC_DEPS@
+LIBDOVECOT_DSYNC_INCLUDE = @LIBDOVECOT_DSYNC_INCLUDE@
+LIBDOVECOT_FTS_INCLUDE = @LIBDOVECOT_FTS_INCLUDE@
+LIBDOVECOT_IMAPC_INCLUDE = @LIBDOVECOT_IMAPC_INCLUDE@
+LIBDOVECOT_IMAP_INCLUDE = @LIBDOVECOT_IMAP_INCLUDE@
+LIBDOVECOT_IMAP_LOGIN_INCLUDE = @LIBDOVECOT_IMAP_LOGIN_INCLUDE@
+LIBDOVECOT_INCLUDE = @LIBDOVECOT_INCLUDE@
+LIBDOVECOT_LDA = @LIBDOVECOT_LDA@
+LIBDOVECOT_LDA_DEPS = @LIBDOVECOT_LDA_DEPS@
+LIBDOVECOT_LDA_INCLUDE = @LIBDOVECOT_LDA_INCLUDE@
+LIBDOVECOT_LIBFTS = @LIBDOVECOT_LIBFTS@
+LIBDOVECOT_LIBFTS_DEPS = @LIBDOVECOT_LIBFTS_DEPS@
+LIBDOVECOT_LIBFTS_INCLUDE = @LIBDOVECOT_LIBFTS_INCLUDE@
+LIBDOVECOT_LMTP_INCLUDE = @LIBDOVECOT_LMTP_INCLUDE@
+LIBDOVECOT_LOGIN = @LIBDOVECOT_LOGIN@
+LIBDOVECOT_LOGIN_DEPS = @LIBDOVECOT_LOGIN_DEPS@
+LIBDOVECOT_LOGIN_INCLUDE = @LIBDOVECOT_LOGIN_INCLUDE@
+LIBDOVECOT_LUA = @LIBDOVECOT_LUA@
+LIBDOVECOT_LUA_DEPS = @LIBDOVECOT_LUA_DEPS@
+LIBDOVECOT_LUA_INCLUDE = @LIBDOVECOT_LUA_INCLUDE@
+LIBDOVECOT_NOTIFY_INCLUDE = @LIBDOVECOT_NOTIFY_INCLUDE@
+LIBDOVECOT_POP3_INCLUDE = @LIBDOVECOT_POP3_INCLUDE@
+LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE = @LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE@
+LIBDOVECOT_SERVICE_INCLUDE = @LIBDOVECOT_SERVICE_INCLUDE@
+LIBDOVECOT_SQL = @LIBDOVECOT_SQL@
+LIBDOVECOT_SQL_DEPS = @LIBDOVECOT_SQL_DEPS@
+LIBDOVECOT_SQL_INCLUDE = @LIBDOVECOT_SQL_INCLUDE@
+LIBDOVECOT_SSL = @LIBDOVECOT_SSL@
+LIBDOVECOT_SSL_DEPS = @LIBDOVECOT_SSL_DEPS@
+LIBDOVECOT_STORAGE = @LIBDOVECOT_STORAGE@
+LIBDOVECOT_STORAGE_DEPS = @LIBDOVECOT_STORAGE_DEPS@
+LIBDOVECOT_STORAGE_INCLUDE = @LIBDOVECOT_STORAGE_INCLUDE@
+LIBDOVECOT_SUBMISSION_INCLUDE = @LIBDOVECOT_SUBMISSION_INCLUDE@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+RANLIB = @RANLIB@
+RELRO_LDFLAGS = @RELRO_LDFLAGS@
+RUN_TEST = @RUN_TEST@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VALGRIND = @VALGRIND@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dovecot_docdir = @dovecot_docdir@
+dovecot_installed_moduledir = @dovecot_installed_moduledir@
+dovecot_moduledir = @dovecot_moduledir@
+dovecot_pkgincludedir = @dovecot_pkgincludedir@
+dovecot_pkglibdir = @dovecot_pkglibdir@
+dovecot_pkglibexecdir = @dovecot_pkglibexecdir@
+dovecot_statedir = @dovecot_statedir@
+dovecotdir = @dovecotdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sieve_docdir = @sieve_docdir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = conf.d
+pkgsysconfdir = $(sysconfdir)/dovecot
+exampledir = $(dovecot_docdir)/example-config
+example_DATA = \
+	sieve-ldap.conf 
+
+EXTRA_DIST = \
+        $(example_DATA)
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/example-config/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/example-config/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-exampleDATA: $(example_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(example_DATA)'; test -n "$(exampledir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(exampledir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(exampledir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \
+	done
+
+uninstall-exampleDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(example_DATA)'; test -n "$(exampledir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(exampledir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(exampledir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-exampleDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-exampleDATA
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exampleDATA install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-exampleDATA
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/pigeonhole/doc/example-config/conf.d/20-managesieve.conf b/pigeonhole/doc/example-config/conf.d/20-managesieve.conf
new file mode 100644
index 0000000..3f71b58
--- /dev/null
+++ b/pigeonhole/doc/example-config/conf.d/20-managesieve.conf
@@ -0,0 +1,84 @@
+##
+## ManageSieve specific settings
+##
+
+# Uncomment to enable managesieve protocol:
+#protocols = $protocols sieve
+
+# Service definitions
+
+#service managesieve-login {
+  #inet_listener sieve {
+  #  port = 4190
+  #}
+
+  #inet_listener sieve_deprecated {
+  #  port = 2000
+  #}
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = 64M
+#}
+
+#service managesieve {
+  # Max. number of ManageSieve processes (connections)
+  #process_limit = 1024
+#}
+
+# Service configuration
+
+protocol sieve {
+  # Maximum ManageSieve command line length in bytes. ManageSieve usually does
+  # not involve overly long command lines, so this setting will not normally
+  # need adjustment
+  #managesieve_max_line_length = 65536
+
+  # Maximum number of ManageSieve connections allowed for a user from each IP
+  # address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+
+  # Space separated list of plugins to load (none known to be useful so far).
+  # Do NOT try to load IMAP plugins here.
+  #mail_plugins =
+
+  # MANAGESIEVE logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #  %{put_bytes} - Number of bytes saved using PUTSCRIPT command
+  #  %{put_count} - Number of scripts saved using PUTSCRIPT command
+  #  %{get_bytes} - Number of bytes read using GETCRIPT command
+  #  %{get_count} - Number of scripts read using GETSCRIPT command
+  #  %{get_bytes} - Number of bytes processed using CHECKSCRIPT command
+  #  %{get_count} - Number of scripts checked using CHECKSCRIPT command
+  #  %{deleted_count} - Number of scripts deleted using DELETESCRIPT command
+  #  %{renamed_count} - Number of scripts renamed using RENAMESCRIPT command
+  #managesieve_logout_format = bytes=%i/%o
+
+  # To fool ManageSieve clients that are focused on CMU's timesieved you can
+  # specify the IMPLEMENTATION capability that Dovecot reports to clients.
+  # For example: 'Cyrus timsieved v2.2.13'
+  #managesieve_implementation_string = Dovecot Pigeonhole
+
+  # Explicitly specify the SIEVE and NOTIFY capability reported by the server
+  # before login. If left unassigned these will be reported dynamically
+  # according to what the Sieve interpreter supports by default (after login
+  # this may differ depending on the user).
+  #managesieve_sieve_capability =
+  #managesieve_notify_capability =
+
+  # The maximum number of compile errors that are returned to the client upon
+  # script upload or script verification.
+  #managesieve_max_compile_errors = 5
+
+  # Refer to 90-sieve.conf for script quota configuration and configuration of
+  # Sieve execution limits.
+}
diff --git a/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf b/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf
new file mode 100644
index 0000000..17dcb77
--- /dev/null
+++ b/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf
@@ -0,0 +1,44 @@
+# Sieve Extprograms plugin configuration
+
+# Don't forget to add the sieve_extprograms plugin to the sieve_plugins setting.
+# Also enable the extensions you need (one or more of vnd.dovecot.pipe,
+# vnd.dovecot.filter and vnd.dovecot.execute) by adding these	to the
+# sieve_extensions or sieve_global_extensions settings. Restricting these
+# extensions to a global context using sieve_global_extensions is recommended.
+
+plugin {
+
+  # The directory where the program sockets are located for the
+  # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension
+  # respectively. The name of each unix socket contained in that directory
+  # directly maps to a program-name referenced from the Sieve script.
+  #sieve_pipe_socket_dir = sieve-pipe
+  #sieve_filter_socket_dir = sieve-filter
+  #sieve_execute_socket_dir = sieve-execute
+
+  # The directory where the scripts are located for direct execution by the
+  # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension
+  # respectively. The name of each script contained in that directory
+  # directly maps to a program-name referenced from the Sieve script.
+  #sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe
+  #sieve_filter_bin_dir = /usr/lib/dovecot/sieve-filter
+  #sieve_execute_bin_dir = /usr/lib/dovecot/sieve-execute
+}
+
+# An example program service called 'do-something' to pipe messages to
+#service do-something {
+  # Define the executed script as parameter to the sieve service
+  #executable = script /usr/lib/dovecot/sieve-pipe/do-something.sh
+
+  # Use some unprivileged user for executing the program
+  #user = dovenull
+
+  # The unix socket located in the sieve_pipe_socket_dir (as defined in the 
+  # plugin {} section above)
+  #unix_listener sieve-pipe/do-something {
+    # LDA/LMTP must have access
+  #  user = vmail  
+  #  mode = 0600
+  #}
+#}
+
diff --git a/pigeonhole/doc/example-config/conf.d/90-sieve.conf b/pigeonhole/doc/example-config/conf.d/90-sieve.conf
new file mode 100644
index 0000000..238bcf4
--- /dev/null
+++ b/pigeonhole/doc/example-config/conf.d/90-sieve.conf
@@ -0,0 +1,205 @@
+##
+## Settings for the Sieve interpreter
+##
+
+# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
+# by adding it to the respective mail_plugins= settings.
+
+# The Sieve interpreter can retrieve Sieve scripts from several types of
+# locations. The default `file' location type is a local filesystem path
+# pointing to a Sieve script file or a directory containing multiple Sieve
+# script files. More complex setups can use other location types such as
+# `ldap' or `dict' to fetch Sieve scripts from remote databases.
+#
+# All settings that specify the location of one ore more Sieve scripts accept
+# the following syntax:
+#
+# location = [<type>:]path[;<option>[=<value>][;...]]
+#
+# If the type prefix is omitted, the script location type is 'file' and the 
+# location is interpreted as a local filesystem path pointing to a Sieve script
+# file or directory. Refer to Pigeonhole wiki or INSTALL file for more
+# information.
+
+plugin {
+  # The location of the user's main Sieve script or script storage. The LDA
+  # Sieve plugin uses this to find the active script for Sieve filtering at
+  # delivery. The "include" extension uses this location for retrieving
+  # :personal" scripts. This is also where the  ManageSieve service will store
+  # the user's scripts, if supported.
+  # 
+  # Currently only the 'file:' location type supports ManageSieve operation.
+  # Other location types like 'dict:' and 'ldap:' can currently only
+  # be used as a read-only script source ().
+  #
+  # For the 'file:' type: use the ';active=' parameter to specify where the
+  # active script symlink is located.
+  # For other types: use the ';name=' parameter to specify the name of the
+  # default/active script.
+  sieve = file:~/sieve;active=~/.dovecot.sieve
+
+  # The default Sieve script when the user has none. This is the location of a
+  # global sieve script file, which gets executed ONLY if user's personal Sieve
+  # script doesn't exist. Be sure to pre-compile this script manually using the
+  # sievec command line tool if the binary is not stored in a global location.
+  # --> See sieve_before for executing scripts before the user's personal
+  #     script.
+  #sieve_default = /var/lib/dovecot/sieve/default.sieve
+
+  # The name by which the default Sieve script (as configured by the 
+  # sieve_default setting) is visible to the user through ManageSieve. 
+  #sieve_default_name = 
+
+  # Location for ":global" include scripts as used by the "include" extension.
+  #sieve_global =
+
+  # The location of a Sieve script that is run for any message that is about to
+  # be discarded; i.e., it is not delivered anywhere by the normal Sieve
+  # execution. This only happens when the "implicit keep" is canceled, by e.g.
+  # the "discard" action, and no actions that deliver the message are executed.
+  # This "discard script" can prevent discarding the message, by executing
+  # alternative actions. If the discard script does nothing, the message is
+	# still discarded as it would be when no discard script is configured.
+  #sieve_discard =
+
+  # Location Sieve of scripts that need to be executed before the user's
+  # personal script. If a 'file' location path points to a directory, all the 
+  # Sieve scripts contained therein (with the proper `.sieve' extension) are
+  # executed. The order of execution within that directory is determined by the
+  # file names, using a normal 8bit per-character comparison.
+  #
+  # Multiple script locations can be specified by appending an increasing number
+  # to the setting name. The Sieve scripts found from these locations are added
+  # to the script execution sequence in the specified order. Reading the
+  # numbered sieve_before settings stops at the first missing setting, so no
+  # numbers may be skipped.
+  #sieve_before = /var/lib/dovecot/sieve.d/
+  #sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain
+  #sieve_before3 = (etc...)
+
+  # Identical to sieve_before, only the specified scripts are executed after the
+  # user's script (only when keep is still in effect!). Multiple script
+  # locations can be specified by appending an increasing number.
+  #sieve_after =
+  #sieve_after2 =
+  #sieve_after2 = (etc...)
+
+  # Which Sieve language extensions are available to users. By default, all
+  # supported extensions are available, except for deprecated extensions or
+  # those that are still under development. Some system administrators may want
+  # to disable certain Sieve extensions or enable those that are not available
+  # by default. This setting can use '+' and '-' to specify differences relative
+  # to the default. For example `sieve_extensions = +imapflags' will enable the
+  # deprecated imapflags extension in addition to all extensions were already
+  # enabled by default.
+  #sieve_extensions = +notify +imapflags
+
+  # Which Sieve language extensions are ONLY available in global scripts. This
+  # can be used to restrict the use of certain Sieve extensions to administrator
+  # control, for instance when these extensions can cause security concerns.
+  # This setting has higher precedence than the `sieve_extensions' setting
+  # (above), meaning that the extensions enabled with this setting are never
+  # available to the user's personal script no matter what is specified for the
+  # `sieve_extensions' setting. The syntax of this setting is similar to the
+  # `sieve_extensions' setting, with the difference that extensions are
+  # enabled or disabled for exclusive use in global scripts. Currently, no
+  # extensions are marked as such by default.
+  #sieve_global_extensions =
+
+  # The Pigeonhole Sieve interpreter can have plugins of its own. Using this
+  # setting, the used plugins can be specified. Check the Dovecot wiki
+  # (wiki2.dovecot.org) or the pigeonhole website
+  # (http://pigeonhole.dovecot.org) for available plugins.
+  # The sieve_extprograms plugin is included in this release.
+  #sieve_plugins =
+
+  # The maximum size of a Sieve script. The compiler will refuse to compile any
+  # script larger than this limit. If set to 0, no limit on the script size is
+  # enforced.
+  #sieve_max_script_size = 1M
+
+  # The maximum number of actions that can be performed during a single script
+  # execution. If set to 0, no limit on the total number of actions is enforced.
+  #sieve_max_actions = 32
+
+  # The maximum number of redirect actions that can be performed during a single
+  # script execution. If set to 0, no redirect actions are allowed.
+  #sieve_max_redirects = 4
+
+  # The maximum number of personal Sieve scripts a single user can have. If set
+  # to 0, no limit on the number of scripts is enforced.
+  # (Currently only relevant for ManageSieve)
+  #sieve_quota_max_scripts = 0
+
+  # The maximum amount of disk storage a single user's scripts may occupy. If
+  # set to 0, no limit on the used amount of disk storage is enforced.
+  # (Currently only relevant for ManageSieve)
+  #sieve_quota_max_storage = 0
+
+  # The primary e-mail address for the user. This is used as a default when no
+  # other appropriate address is available for sending messages. If this setting
+  # is not configured, either the postmaster or null "<>" address is used as a
+  # sender, depending on the action involved. This setting is important when
+  # there is no message envelope to extract addresses from, such as when the
+  # script is executed in IMAP.
+  #sieve_user_email =
+
+  # The path to the file where the user log is written. If not configured, a
+  # default location is used. If the main user's personal Sieve (as configured
+  # with sieve=) is a file, the logfile is set to <filename>.log by default. If
+  # it is not a file, the default user log file is ~/.dovecot.sieve.log.
+  #sieve_user_log =
+
+  # Specifies what envelope sender address is used for redirected messages.
+  # The following values are supported for this setting:
+  #
+  #   "sender"         - The sender address is used (default).
+  #   "recipient"      - The final recipient address is used.
+  #   "orig_recipient" - The original recipient is used.
+  #   "user_email"     - The user's primary address is used. This is
+  #                      configured with the "sieve_user_email" setting. If
+  #                      that setting is unconfigured, "user_mail" is equal to
+  #                      "recipient".
+  #   "postmaster"     - The postmaster_address configured for the LDA.
+  #   "<user@domain>"  - Redirected messages are always sent from user@domain.
+  #                      The angle brackets are mandatory. The null "<>" address
+  #                      is also supported.
+  #
+  # This setting is ignored when the envelope sender is "<>". In that case the
+  # sender of the redirected message is also always "<>".
+  #sieve_redirect_envelope_from = sender
+
+  ## TRACE DEBUGGING
+  # Trace debugging provides detailed insight in the operations performed by
+  # the Sieve script. These settings apply to both the LDA Sieve plugin and the
+  # IMAPSIEVE plugin. 
+  #
+  # WARNING: On a busy server, this functionality can quickly fill up the trace
+  # directory with a lot of trace files. Enable this only temporarily and as
+  # selective as possible.
+  
+  # The directory where trace files are written. Trace debugging is disabled if
+  # this setting is not configured or if the directory does not exist. If the 
+  # path is relative or it starts with "~/" it is interpreted relative to the
+  # current user's home directory.
+  #sieve_trace_dir =
+  
+  # The verbosity level of the trace messages. Trace debugging is disabled if
+  # this setting is not configured. Possible values are:
+  #
+  #   "actions"        - Only print executed action commands, like keep,
+  #                      fileinto, reject and redirect.
+  #   "commands"       - Print any executed command, excluding test commands.
+  #   "tests"          - Print all executed commands and performed tests.
+  #   "matching"       - Print all executed commands, performed tests and the
+  #                      values matched in those tests.
+  #sieve_trace_level =
+  
+  # Enables highly verbose debugging messages that are usually only useful for
+  # developers.
+  #sieve_trace_debug = no
+  
+  # Enables showing byte code addresses in the trace output, rather than only
+  # the source line numbers.
+  #sieve_trace_addresses = no 
+}
diff --git a/pigeonhole/doc/example-config/conf.d/Makefile.am b/pigeonhole/doc/example-config/conf.d/Makefile.am
new file mode 100644
index 0000000..8cea566
--- /dev/null
+++ b/pigeonhole/doc/example-config/conf.d/Makefile.am
@@ -0,0 +1,10 @@
+pkgsysconfdir = $(sysconfdir)/dovecot
+
+exampledir = $(dovecot_docdir)/example-config/conf.d
+example_DATA = \
+	20-managesieve.conf \
+	90-sieve.conf \
+	90-sieve-extprograms.conf
+
+EXTRA_DIST = \
+	$(example_DATA)
diff --git a/pigeonhole/doc/example-config/conf.d/Makefile.in b/pigeonhole/doc/example-config/conf.d/Makefile.in
new file mode 100644
index 0000000..a32ed00
--- /dev/null
+++ b/pigeonhole/doc/example-config/conf.d/Makefile.in
@@ -0,0 +1,576 @@
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc/example-config/conf.d
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dovecot.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/dummy-config.h \
+	$(top_builddir)/pigeonhole-config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(exampledir)"
+DATA = $(example_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BINARY_CFLAGS = @BINARY_CFLAGS@
+BINARY_LDFLAGS = @BINARY_LDFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@
+DLLTOOL = @DLLTOOL@
+DOVECOT_BINARY_CFLAGS = @DOVECOT_BINARY_CFLAGS@
+DOVECOT_BINARY_LDFLAGS = @DOVECOT_BINARY_LDFLAGS@
+DOVECOT_CFLAGS = @DOVECOT_CFLAGS@
+DOVECOT_COMPRESS_LIBS = @DOVECOT_COMPRESS_LIBS@
+DOVECOT_INSTALLED = @DOVECOT_INSTALLED@
+DOVECOT_LIBS = @DOVECOT_LIBS@
+DOVECOT_LUA_CFLAGS = @DOVECOT_LUA_CFLAGS@
+DOVECOT_LUA_LIBS = @DOVECOT_LUA_LIBS@
+DOVECOT_SQL_LIBS = @DOVECOT_SQL_LIBS@
+DOVECOT_SSL_LIBS = @DOVECOT_SSL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDAP_LIBS = @LDAP_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBDOVECOT = @LIBDOVECOT@
+LIBDOVECOT_ACL_INCLUDE = @LIBDOVECOT_ACL_INCLUDE@
+LIBDOVECOT_AUTH_INCLUDE = @LIBDOVECOT_AUTH_INCLUDE@
+LIBDOVECOT_COMPRESS = @LIBDOVECOT_COMPRESS@
+LIBDOVECOT_COMPRESS_DEPS = @LIBDOVECOT_COMPRESS_DEPS@
+LIBDOVECOT_CONFIG_INCLUDE = @LIBDOVECOT_CONFIG_INCLUDE@
+LIBDOVECOT_DEPS = @LIBDOVECOT_DEPS@
+LIBDOVECOT_DOVEADM_INCLUDE = @LIBDOVECOT_DOVEADM_INCLUDE@
+LIBDOVECOT_DSYNC = @LIBDOVECOT_DSYNC@
+LIBDOVECOT_DSYNC_DEPS = @LIBDOVECOT_DSYNC_DEPS@
+LIBDOVECOT_DSYNC_INCLUDE = @LIBDOVECOT_DSYNC_INCLUDE@
+LIBDOVECOT_FTS_INCLUDE = @LIBDOVECOT_FTS_INCLUDE@
+LIBDOVECOT_IMAPC_INCLUDE = @LIBDOVECOT_IMAPC_INCLUDE@
+LIBDOVECOT_IMAP_INCLUDE = @LIBDOVECOT_IMAP_INCLUDE@
+LIBDOVECOT_IMAP_LOGIN_INCLUDE = @LIBDOVECOT_IMAP_LOGIN_INCLUDE@
+LIBDOVECOT_INCLUDE = @LIBDOVECOT_INCLUDE@
+LIBDOVECOT_LDA = @LIBDOVECOT_LDA@
+LIBDOVECOT_LDA_DEPS = @LIBDOVECOT_LDA_DEPS@
+LIBDOVECOT_LDA_INCLUDE = @LIBDOVECOT_LDA_INCLUDE@
+LIBDOVECOT_LIBFTS = @LIBDOVECOT_LIBFTS@
+LIBDOVECOT_LIBFTS_DEPS = @LIBDOVECOT_LIBFTS_DEPS@
+LIBDOVECOT_LIBFTS_INCLUDE = @LIBDOVECOT_LIBFTS_INCLUDE@
+LIBDOVECOT_LMTP_INCLUDE = @LIBDOVECOT_LMTP_INCLUDE@
+LIBDOVECOT_LOGIN = @LIBDOVECOT_LOGIN@
+LIBDOVECOT_LOGIN_DEPS = @LIBDOVECOT_LOGIN_DEPS@
+LIBDOVECOT_LOGIN_INCLUDE = @LIBDOVECOT_LOGIN_INCLUDE@
+LIBDOVECOT_LUA = @LIBDOVECOT_LUA@
+LIBDOVECOT_LUA_DEPS = @LIBDOVECOT_LUA_DEPS@
+LIBDOVECOT_LUA_INCLUDE = @LIBDOVECOT_LUA_INCLUDE@
+LIBDOVECOT_NOTIFY_INCLUDE = @LIBDOVECOT_NOTIFY_INCLUDE@
+LIBDOVECOT_POP3_INCLUDE = @LIBDOVECOT_POP3_INCLUDE@
+LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE = @LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE@
+LIBDOVECOT_SERVICE_INCLUDE = @LIBDOVECOT_SERVICE_INCLUDE@
+LIBDOVECOT_SQL = @LIBDOVECOT_SQL@
+LIBDOVECOT_SQL_DEPS = @LIBDOVECOT_SQL_DEPS@
+LIBDOVECOT_SQL_INCLUDE = @LIBDOVECOT_SQL_INCLUDE@
+LIBDOVECOT_SSL = @LIBDOVECOT_SSL@
+LIBDOVECOT_SSL_DEPS = @LIBDOVECOT_SSL_DEPS@
+LIBDOVECOT_STORAGE = @LIBDOVECOT_STORAGE@
+LIBDOVECOT_STORAGE_DEPS = @LIBDOVECOT_STORAGE_DEPS@
+LIBDOVECOT_STORAGE_INCLUDE = @LIBDOVECOT_STORAGE_INCLUDE@
+LIBDOVECOT_SUBMISSION_INCLUDE = @LIBDOVECOT_SUBMISSION_INCLUDE@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+RANLIB = @RANLIB@
+RELRO_LDFLAGS = @RELRO_LDFLAGS@
+RUN_TEST = @RUN_TEST@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VALGRIND = @VALGRIND@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dovecot_docdir = @dovecot_docdir@
+dovecot_installed_moduledir = @dovecot_installed_moduledir@
+dovecot_moduledir = @dovecot_moduledir@
+dovecot_pkgincludedir = @dovecot_pkgincludedir@
+dovecot_pkglibdir = @dovecot_pkglibdir@
+dovecot_pkglibexecdir = @dovecot_pkglibexecdir@
+dovecot_statedir = @dovecot_statedir@
+dovecotdir = @dovecotdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sieve_docdir = @sieve_docdir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+pkgsysconfdir = $(sysconfdir)/dovecot
+exampledir = $(dovecot_docdir)/example-config/conf.d
+example_DATA = \
+	20-managesieve.conf \
+	90-sieve.conf \
+	90-sieve-extprograms.conf
+
+EXTRA_DIST = \
+	$(example_DATA)
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/example-config/conf.d/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/example-config/conf.d/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-exampleDATA: $(example_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(example_DATA)'; test -n "$(exampledir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(exampledir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(exampledir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \
+	done
+
+uninstall-exampleDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(example_DATA)'; test -n "$(exampledir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(exampledir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(exampledir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-exampleDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-exampleDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exampleDATA install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+	uninstall-am uninstall-exampleDATA
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/pigeonhole/doc/example-config/sieve-ldap.conf b/pigeonhole/doc/example-config/sieve-ldap.conf
new file mode 100644
index 0000000..0325ee5
--- /dev/null
+++ b/pigeonhole/doc/example-config/sieve-ldap.conf
@@ -0,0 +1,74 @@
+# This file needs to be accessible by the Sieve interpreter running in LDA/LMTP.
+# This requires acces by the mail user. Don't use privileged LDAP credentials
+# here as these may likely leak. Only search and read access is required.
+
+# Space separated list of LDAP hosts to use. host:port is allowed too.
+hosts = localhost
+
+# LDAP URIs to use. You can use this instead of hosts list. Note that this
+# setting isn't supported by all LDAP libraries.
+#uris = 
+
+# Distinguished Name - the username used to login to the LDAP server.
+# Leave it commented out to bind anonymously.
+#dn = 
+
+# Password for LDAP server, if dn is specified.
+#dnpass = 
+
+# Use SASL binding instead of the simple binding. Note that this changes
+# ldap_version automatically to be 3 if it's lower.
+#sasl_bind = no
+# SASL mechanism name to use.
+#sasl_mech =
+# SASL realm to use.
+#sasl_realm =
+# SASL authorization ID, ie. the dnpass is for this "master user", but the
+# dn is still the logged in user. Normally you want to keep this empty.
+#sasl_authz_id =
+
+# Use TLS to connect to the LDAP server.
+#tls = no
+# TLS options, currently supported only with OpenLDAP:
+#tls_ca_cert_file =
+#tls_ca_cert_dir =
+#tls_cipher_suite =
+# TLS cert/key is used only if LDAP server requires a client certificate.
+#tls_cert_file =
+#tls_key_file =
+# Valid values: never, hard, demand, allow, try
+#tls_require_cert =
+
+# Use the given ldaprc path.
+#ldaprc_path =
+
+# LDAP library debug level as specified by LDAP_DEBUG_* in ldap_log.h.
+# -1 = everything. You may need to recompile OpenLDAP with debugging enabled
+# to get enough output.
+#debug_level = 0
+
+# LDAP protocol version to use. Likely 2 or 3.
+#ldap_version = 3
+
+# LDAP base. %variables can be used here.
+# For example: dc=mail, dc=example, dc=org
+base =
+
+# Dereference: never, searching, finding, always
+#deref = never
+
+# Search scope: base, onelevel, subtree
+#scope = subtree
+
+# Filter for user lookup. Some variables can be used:
+#   %u      - username
+#   %n      - user part in user@domain, same as %u if there's no domain
+#   %d      - domain part in user@domain, empty if there's no domain
+#   %{name} - name of the Sieve script
+#sieve_ldap_filter = (&(objectClass=posixAccount)(uid=%u))
+
+# Attribute containing the Sieve script
+#sieve_ldap_script_attr = mailSieveRuleSource
+
+# Attribute used for modification tracking
+#sieve_ldap_mod_attr = modifyTimestamp