summaryrefslogtreecommitdiffstats
path: root/natsemi.c
diff options
context:
space:
mode:
Diffstat (limited to 'natsemi.c')
-rw-r--r--natsemi.c987
1 files changed, 987 insertions, 0 deletions
diff --git a/natsemi.c b/natsemi.c
new file mode 100644
index 0000000..4d9fc09
--- /dev/null
+++ b/natsemi.c
@@ -0,0 +1,987 @@
+/* Copyright 2001 Sun Microsystems (thockin@sun.com) */
+#include <stdio.h>
+#include "internal.h"
+
+#define PCI_VENDOR_NATSEMI 0x100b
+#define PCI_DEVICE_DP83815 0x0020
+#define NATSEMI_MAGIC (PCI_VENDOR_NATSEMI | \
+ (PCI_DEVICE_DP83815<<16))
+
+/* register indices in the ethtool_regs->data */
+#define REG_CR 0
+#define BIT_CR_TXE (1<<0)
+#define BIT_CR_RXE (1<<2)
+#define BIT_CR_RST (1<<8)
+#define REG_CFG 1
+#define BIT_CFG_BEM (1<<0)
+#define BIT_CFG_BROM_DIS (1<<2)
+#define BIT_CFG_PHY_DIS (1<<9)
+#define BIT_CFG_PHY_RST (1<<10)
+#define BIT_CFG_EXT_PHY (1<<12)
+#define BIT_CFG_ANEG_EN (1<<13)
+#define BIT_CFG_ANEG_100 (1<<14)
+#define BIT_CFG_ANEG_FDUP (1<<15)
+#define BIT_CFG_PINT_ACEN (1<<17)
+#define BIT_CFG_PHY_CFG (0x3f<<18)
+#define BIT_CFG_ANEG_DN (1<<27)
+#define BIT_CFG_POL (1<<28)
+#define BIT_CFG_FDUP (1<<29)
+#define BIT_CFG_SPEED100 (1<<30)
+#define BIT_CFG_LNKSTS (1<<31)
+
+#define REG_MEAR 2
+#define REG_PTSCR 3
+#define BIT_PTSCR_EEBIST_FAIL (1<<0)
+#define BIT_PTSCR_EELOAD_EN (1<<2)
+#define BIT_PTSCR_RBIST_RXFFAIL (1<<3)
+#define BIT_PTSCR_RBIST_TXFAIL (1<<4)
+#define BIT_PTSCR_RBIST_RXFAIL (1<<5)
+#define REG_ISR 4
+#define REG_IMR 5
+#define BIT_INTR_RXOK (1<<0)
+#define NAME_INTR_RXOK "Rx Complete"
+#define BIT_INTR_RXDESC (1<<1)
+#define NAME_INTR_RXDESC "Rx Descriptor"
+#define BIT_INTR_RXERR (1<<2)
+#define NAME_INTR_RXERR "Rx Packet Error"
+#define BIT_INTR_RXEARLY (1<<3)
+#define NAME_INTR_RXEARLY "Rx Early Threshold"
+#define BIT_INTR_RXIDLE (1<<4)
+#define NAME_INTR_RXIDLE "Rx Idle"
+#define BIT_INTR_RXORN (1<<5)
+#define NAME_INTR_RXORN "Rx Overrun"
+#define BIT_INTR_TXOK (1<<6)
+#define NAME_INTR_TXOK "Tx Packet OK"
+#define BIT_INTR_TXDESC (1<<7)
+#define NAME_INTR_TXDESC "Tx Descriptor"
+#define BIT_INTR_TXERR (1<<8)
+#define NAME_INTR_TXERR "Tx Packet Error"
+#define BIT_INTR_TXIDLE (1<<9)
+#define NAME_INTR_TXIDLE "Tx Idle"
+#define BIT_INTR_TXURN (1<<10)
+#define NAME_INTR_TXURN "Tx Underrun"
+#define BIT_INTR_MIB (1<<11)
+#define NAME_INTR_MIB "MIB Service"
+#define BIT_INTR_SWI (1<<12)
+#define NAME_INTR_SWI "Software"
+#define BIT_INTR_PME (1<<13)
+#define NAME_INTR_PME "Power Management Event"
+#define BIT_INTR_PHY (1<<14)
+#define NAME_INTR_PHY "Phy"
+#define BIT_INTR_HIBERR (1<<15)
+#define NAME_INTR_HIBERR "High Bits Error"
+#define BIT_INTR_RXSOVR (1<<16)
+#define NAME_INTR_RXSOVR "Rx Status FIFO Overrun"
+#define BIT_INTR_RTABT (1<<20)
+#define NAME_INTR_RTABT "Received Target Abort"
+#define BIT_INTR_RMABT (1<<20)
+#define NAME_INTR_RMABT "Received Master Abort"
+#define BIT_INTR_SSERR (1<<20)
+#define NAME_INTR_SSERR "Signaled System Error"
+#define BIT_INTR_DPERR (1<<20)
+#define NAME_INTR_DPERR "Detected Parity Error"
+#define BIT_INTR_RXRCMP (1<<20)
+#define NAME_INTR_RXRCMP "Rx Reset Complete"
+#define BIT_INTR_TXRCMP (1<<20)
+#define NAME_INTR_TXRCMP "Tx Reset Complete"
+#define REG_IER 6
+#define BIT_IER_IE (1<<0)
+#define REG_TXDP 8
+#define REG_TXCFG 9
+#define BIT_TXCFG_DRTH (0x3f<<0)
+#define BIT_TXCFG_FLTH (0x3f<<8)
+#define BIT_TXCFG_MXDMA (0x7<<20)
+#define BIT_TXCFG_ATP (1<<28)
+#define BIT_TXCFG_MLB (1<<29)
+#define BIT_TXCFG_HBI (1<<30)
+#define BIT_TXCFG_CSI (1<<31)
+#define REG_RXDP 12
+#define REG_RXCFG 13
+#define BIT_RXCFG_DRTH (0x1f<<1)
+#define BIT_RXCFG_MXDMA (0x7<<20)
+#define BIT_RXCFG_ALP (1<<27)
+#define BIT_RXCFG_ATX (1<<28)
+#define BIT_RXCFG_ARP (1<<30)
+#define BIT_RXCFG_AEP (1<<31)
+#define REG_CCSR 15
+#define BIT_CCSR_CLKRUN_EN (1<<0)
+#define BIT_CCSR_PMEEN (1<<8)
+#define BIT_CCSR_PMESTS (1<<15)
+#define REG_WCSR 16
+#define BIT_WCSR_WKPHY (1<<0)
+#define BIT_WCSR_WKUCP (1<<1)
+#define BIT_WCSR_WKMCP (1<<2)
+#define BIT_WCSR_WKBCP (1<<3)
+#define BIT_WCSR_WKARP (1<<4)
+#define BIT_WCSR_WKPAT0 (1<<5)
+#define BIT_WCSR_WKPAT1 (1<<6)
+#define BIT_WCSR_WKPAT2 (1<<7)
+#define BIT_WCSR_WKPAT3 (1<<8)
+#define BIT_WCSR_WKMAG (1<<9)
+#define BIT_WCSR_MPSOE (1<<10)
+#define BIT_WCSR_SOHACK (1<<20)
+#define BIT_WCSR_PHYINT (1<<22)
+#define BIT_WCSR_UCASTR (1<<23)
+#define BIT_WCSR_MCASTR (1<<24)
+#define BIT_WCSR_BCASTR (1<<25)
+#define BIT_WCSR_ARPR (1<<26)
+#define BIT_WCSR_PATM0 (1<<27)
+#define BIT_WCSR_PATM1 (1<<28)
+#define BIT_WCSR_PATM2 (1<<29)
+#define BIT_WCSR_PATM3 (1<<30)
+#define BIT_WCSR_MPR (1<<31)
+#define REG_PCR 17
+#define BIT_PCR_PAUSE_CNT (0xffff<<0)
+#define BIT_PCR_PSNEG (1<<21)
+#define BIT_PCR_PS_RCVD (1<<22)
+#define BIT_PCR_PS_DA (1<<29)
+#define BIT_PCR_PSMCAST (1<<30)
+#define BIT_PCR_PSEN (1<<31)
+#define REG_RFCR 18
+#define BIT_RFCR_UHEN (1<<20)
+#define BIT_RFCR_MHEN (1<<21)
+#define BIT_RFCR_AARP (1<<22)
+#define BIT_RFCR_APAT0 (1<<23)
+#define BIT_RFCR_APAT1 (1<<24)
+#define BIT_RFCR_APAT2 (1<<25)
+#define BIT_RFCR_APAT3 (1<<26)
+#define BIT_RFCR_APM (1<<27)
+#define BIT_RFCR_AAU (1<<28)
+#define BIT_RFCR_AAM (1<<29)
+#define BIT_RFCR_AAB (1<<30)
+#define BIT_RFCR_RFEN (1<<31)
+#define REG_RFDR 19
+#define REG_BRAR 20
+#define BIT_BRAR_AUTOINC (1<<31)
+#define REG_BRDR 21
+#define REG_SRR 22
+#define REG_MIBC 23
+#define BIT_MIBC_WRN (1<<0)
+#define BIT_MIBC_FRZ (1<<1)
+#define REG_MIB0 24
+#define REG_MIB1 25
+#define REG_MIB2 26
+#define REG_MIB3 27
+#define REG_MIB4 28
+#define REG_MIB5 29
+#define REG_MIB6 30
+#define REG_BMCR 32
+#define BIT_BMCR_FDUP (1<<8)
+#define BIT_BMCR_ANRST (1<<9)
+#define BIT_BMCR_ISOL (1<<10)
+#define BIT_BMCR_PDOWN (1<<11)
+#define BIT_BMCR_ANEN (1<<12)
+#define BIT_BMCR_SPEED (1<<13)
+#define BIT_BMCR_LOOP (1<<14)
+#define BIT_BMCR_RST (1<<15)
+#define REG_BMSR 33
+#define BIT_BMSR_JABBER (1<<1)
+#define BIT_BMSR_LNK (1<<2)
+#define BIT_BMSR_ANCAP (1<<3)
+#define BIT_BMSR_RFAULT (1<<4)
+#define BIT_BMSR_ANDONE (1<<5)
+#define BIT_BMSR_PREAMBLE (1<<6)
+#define BIT_BMSR_10HCAP (1<<11)
+#define BIT_BMSR_10FCAP (1<<12)
+#define BIT_BMSR_100HCAP (1<<13)
+#define BIT_BMSR_100FCAP (1<<14)
+#define BIT_BMSR_100T4CAP (1<<15)
+#define REG_PHYIDR1 34
+#define REG_PHYIDR2 35
+#define BIT_PHYIDR2_OUILSB (0x3f<<10)
+#define BIT_PHYIDR2_MODEL (0x3f<<4)
+#define BIT_PHYIDR2_REV (0xf)
+#define REG_ANAR 36
+#define BIT_ANAR_PROTO (0x1f<<0)
+#define BIT_ANAR_10 (1<<5)
+#define BIT_ANAR_10_FD (1<<6)
+#define BIT_ANAR_TX (1<<7)
+#define BIT_ANAR_TXFD (1<<8)
+#define BIT_ANAR_T4 (1<<9)
+#define BIT_ANAR_PAUSE (1<<10)
+#define BIT_ANAR_RF (1<<13)
+#define BIT_ANAR_NP (1<<15)
+#define REG_ANLPAR 37
+#define BIT_ANLPAR_PROTO (0x1f<<0)
+#define BIT_ANLPAR_10 (1<<5)
+#define BIT_ANLPAR_10_FD (1<<6)
+#define BIT_ANLPAR_TX (1<<7)
+#define BIT_ANLPAR_TXFD (1<<8)
+#define BIT_ANLPAR_T4 (1<<9)
+#define BIT_ANLPAR_PAUSE (1<<10)
+#define BIT_ANLPAR_RF (1<<13)
+#define BIT_ANLPAR_ACK (1<<14)
+#define BIT_ANLPAR_NP (1<<15)
+#define REG_ANER 38
+#define BIT_ANER_LP_AN_ENABLE (1<<0)
+#define BIT_ANER_PAGE_RX (1<<1)
+#define BIT_ANER_NP_ABLE (1<<2)
+#define BIT_ANER_LP_NP_ABLE (1<<3)
+#define BIT_ANER_PDF (1<<4)
+#define REG_ANNPTR 39
+#define REG_PHYSTS 48
+#define BIT_PHYSTS_LNK (1<<0)
+#define BIT_PHYSTS_SPD10 (1<<1)
+#define BIT_PHYSTS_FDUP (1<<2)
+#define BIT_PHYSTS_LOOP (1<<3)
+#define BIT_PHYSTS_ANDONE (1<<4)
+#define BIT_PHYSTS_JABBER (1<<5)
+#define BIT_PHYSTS_RF (1<<6)
+#define BIT_PHYSTS_MINT (1<<7)
+#define BIT_PHYSTS_FC (1<<11)
+#define BIT_PHYSTS_POL (1<<12)
+#define BIT_PHYSTS_RXERR (1<<13)
+#define REG_MICR 49
+#define BIT_MICR_INTEN (1<<1)
+#define REG_MISR 50
+#define BIT_MISR_MSK_RHF (1<<9)
+#define BIT_MISR_MSK_FHF (1<<10)
+#define BIT_MISR_MSK_ANC (1<<11)
+#define BIT_MISR_MSK_RF (1<<12)
+#define BIT_MISR_MSK_JAB (1<<13)
+#define BIT_MISR_MSK_LNK (1<<14)
+#define BIT_MISR_MINT (1<<15)
+#define REG_PGSEL 51
+#define REG_FCSCR 52
+#define REG_RECR 53
+#define REG_PCSR 54
+#define BIT_PCSR_NRZI (1<<2)
+#define BIT_PCSR_FORCE_100 (1<<5)
+#define BIT_PCSR_SDOPT (1<<8)
+#define BIT_PCSR_SDFORCE (1<<9)
+#define BIT_PCSR_TQM (1<<10)
+#define BIT_PCSR_CLK (1<<11)
+#define BIT_PCSR_4B5B (1<<12)
+#define REG_PHYCR 57
+#define BIT_PHYCR_PHYADDR (0x1f<<0)
+#define BIT_PHYCR_PAUSE_STS (1<<7)
+#define BIT_PHYCR_STRETCH (1<<8)
+#define BIT_PHYCR_BIST (1<<9)
+#define BIT_PHYCR_BIST_STAT (1<<10)
+#define BIT_PHYCR_PSR15 (1<<11)
+#define REG_TBTSCR 58
+#define BIT_TBTSCR_JAB (1<<0)
+#define BIT_TBTSCR_BEAT (1<<1)
+#define BIT_TBTSCR_AUTOPOL (1<<3)
+#define BIT_TBTSCR_POL (1<<4)
+#define BIT_TBTSCR_FPOL (1<<5)
+#define BIT_TBTSCR_FORCE_10 (1<<6)
+#define BIT_TBTSCR_PULSE (1<<7)
+#define BIT_TBTSCR_LOOP (1<<8)
+#define REG_PMDCSR 64
+#define REG_TSTDAT 65
+#define REG_DSPCFG 66
+#define REG_SDCFG 67
+#define REG_PMATCH0 68
+#define REG_PMATCH1 69
+#define REG_PMATCH2 70
+#define REG_PCOUNT0 71
+#define REG_PCOUNT1 72
+#define REG_SOPASS0 73
+#define REG_SOPASS1 74
+#define REG_SOPASS2 75
+
+static void __print_intr(int d, int intr, const char *name,
+ const char *s1, const char *s2)
+{
+ if ((d) & intr)
+ fprintf(stdout, " %s Interrupt: %s\n", name, s1);
+ else if (s2)
+ fprintf(stdout, " %s Interrupt: %s\n", name, s2);
+}
+
+#define PRINT_INTR(d, i, s1, s2) do { \
+ int intr = BIT_INTR_ ## i; \
+ const char *name = NAME_INTR_ ## i; \
+ __print_intr(d, intr, name, s1, s2); \
+} while (0)
+
+#define PRINT_INTRS(d, s1, s2) do { \
+ PRINT_INTR((d), RXOK, s1, s2); \
+ PRINT_INTR((d), RXDESC, s1, s2); \
+ PRINT_INTR((d), RXERR, s1, s2); \
+ PRINT_INTR((d), RXEARLY, s1, s2); \
+ PRINT_INTR((d), RXIDLE, s1, s2); \
+ PRINT_INTR((d), RXORN, s1, s2); \
+ PRINT_INTR((d), TXOK, s1, s2); \
+ PRINT_INTR((d), TXDESC, s1, s2); \
+ PRINT_INTR((d), TXERR, s1, s2); \
+ PRINT_INTR((d), TXIDLE, s1, s2); \
+ PRINT_INTR((d), TXURN, s1, s2); \
+ PRINT_INTR((d), MIB, s1, s2); \
+ PRINT_INTR((d), SWI, s1, s2); \
+ PRINT_INTR((d), PME, s1, s2); \
+ PRINT_INTR((d), PHY, s1, s2); \
+ PRINT_INTR((d), HIBERR, s1, s2); \
+ PRINT_INTR((d), RXSOVR, s1, s2); \
+ PRINT_INTR((d), RTABT, s1, s2); \
+ PRINT_INTR((d), RMABT, s1, s2); \
+ PRINT_INTR((d), SSERR, s1, s2); \
+ PRINT_INTR((d), DPERR, s1, s2); \
+ PRINT_INTR((d), RXRCMP, s1, s2); \
+ PRINT_INTR((d), TXRCMP, s1, s2); \
+} while (0)
+
+int
+natsemi_dump_regs(struct ethtool_drvinfo *info __maybe_unused,
+ struct ethtool_regs *regs)
+{
+ u32 *data = (u32 *)regs->data;
+ u32 tmp;
+
+ fprintf(stdout, "Mac/BIU Registers\n");
+ fprintf(stdout, "-----------------\n");
+
+ /* command register */
+ fprintf(stdout,
+ "0x00: CR (Command): 0x%08x\n",
+ data[REG_CR]);
+ fprintf(stdout,
+ " Transmit %s\n"
+ " Receive %s\n",
+ data[REG_CR] & BIT_CR_TXE ? "Active" : "Idle",
+ data[REG_CR] & BIT_CR_RXE ? "Active" : "Idle");
+ if (data[REG_CR] & BIT_CR_RST) fprintf(stdout,
+ " Reset In Progress\n");
+
+ /* configuration register */
+ fprintf(stdout,
+ "0x04: CFG (Configuration): 0x%08x\n",
+ data[REG_CFG]);
+ fprintf(stdout,
+ " %s Endian\n"
+ " Boot ROM %s\n"
+ " Internal Phy %s\n"
+ " Phy Reset %s\n"
+ " External Phy %s\n"
+ " Default Auto-Negotiation %s, %s %s Mb %s Duplex\n"
+ " Phy Interrupt %sAuto-Cleared\n"
+ " Phy Configuration = 0x%02x\n"
+ " Auto-Negotiation %s\n"
+ " %s Polarity\n"
+ " %s Duplex\n"
+ " %d Mb/s\n"
+ " Link %s\n",
+ data[REG_CFG] & BIT_CFG_BEM ? "Big" : "Little",
+ data[REG_CFG] & BIT_CFG_BROM_DIS ? "Disabled" : "Enabled",
+ data[REG_CFG] & BIT_CFG_PHY_DIS ? "Disabled" : "Enabled",
+ data[REG_CFG] & BIT_CFG_PHY_RST ? "In Progress" : "Idle",
+ data[REG_CFG] & BIT_CFG_EXT_PHY ? "Enabled" : "Disabled",
+ data[REG_CFG] & BIT_CFG_ANEG_EN ? "Enabled" : "Disabled",
+ data[REG_CFG] & BIT_CFG_ANEG_EN ? "Advertise" : "Force",
+ data[REG_CFG] & BIT_CFG_ANEG_100 ?
+ (data[REG_CFG] & BIT_CFG_ANEG_EN ? "10/100" : "100")
+ : "10",
+ data[REG_CFG] & BIT_CFG_ANEG_FDUP ?
+ (data[REG_CFG] & BIT_CFG_ANEG_EN ? "Half/Full" : "Full")
+ : "Half",
+ data[REG_CFG] & BIT_CFG_PINT_ACEN ? "" : "Not ",
+ data[REG_CFG] & BIT_CFG_PHY_CFG >> 18,
+ data[REG_CFG] & BIT_CFG_ANEG_DN ? "Done" : "Not Done",
+ data[REG_CFG] & BIT_CFG_POL ? "Reversed" : "Normal",
+ data[REG_CFG] & BIT_CFG_FDUP ? "Full" : "Half",
+ data[REG_CFG] & BIT_CFG_SPEED100 ? 100 : 10,
+ data[REG_CFG] & BIT_CFG_LNKSTS ? "Up" : "Down");
+
+ /* EEPROM access register */
+ fprintf(stdout,
+ "0x08: MEAR (EEPROM Access): 0x%08x\n",
+ data[REG_MEAR]);
+
+ /* PCI test control register */
+ fprintf(stdout,
+ "0x0c: PTSCR (PCI Test Control): 0x%08x\n",
+ data[REG_PTSCR]);
+ fprintf(stdout,
+ " EEPROM Self Test %s\n"
+ " Rx Filter Self Test %s\n"
+ " Tx FIFO Self Test %s\n"
+ " Rx FIFO Self Test %s\n",
+ data[REG_PTSCR] & BIT_PTSCR_EEBIST_FAIL ? "Failed" : "Passed",
+ data[REG_PTSCR] & BIT_PTSCR_RBIST_RXFFAIL ? "Failed" : "Passed",
+ data[REG_PTSCR] & BIT_PTSCR_RBIST_TXFAIL ? "Failed" : "Passed",
+ data[REG_PTSCR] & BIT_PTSCR_RBIST_RXFAIL ? "Failed" : "Passed");
+ if (data[REG_PTSCR] & BIT_PTSCR_EELOAD_EN) fprintf(stdout,
+ " EEPROM Reload In Progress\n");
+
+ /* Interrupt status register */
+ fprintf(stdout,
+ "0x10: ISR (Interrupt Status): 0x%08x\n",
+ data[REG_ISR]);
+ if (data[REG_ISR])
+ PRINT_INTRS(data[REG_ISR], "Active", (char *)NULL);
+ else
+ fprintf(stdout, " No Interrupts Active\n");
+
+ /* Interrupt mask register */
+ fprintf(stdout,
+ "0x14: IMR (Interrupt Mask): 0x%08x\n",
+ data[REG_IMR]);
+ PRINT_INTRS(data[REG_IMR], "Enabled", "Masked");
+
+ /* Interrupt enable register */
+ fprintf(stdout,
+ "0x18: IER (Interrupt Enable): 0x%08x\n",
+ data[REG_IER]);
+ fprintf(stdout,
+ " Interrupts %s\n",
+ data[REG_IER] & BIT_IER_IE ? "Enabled" : "Disabled");
+
+ /* Tx descriptor pointer register */
+ fprintf(stdout,
+ "0x20: TXDP (Tx Descriptor Pointer): 0x%08x\n",
+ data[REG_TXDP]);
+
+ /* Tx configuration register */
+ fprintf(stdout,
+ "0x24: TXCFG (Tx Config): 0x%08x\n",
+ data[REG_TXCFG]);
+ tmp = (data[REG_TXCFG] & BIT_TXCFG_MXDMA)>>20;
+ fprintf(stdout,
+ " Drain Threshold = %d bytes (%d)\n"
+ " Fill Threshold = %d bytes (%d)\n"
+ " Max DMA Burst per Tx = %d bytes\n"
+ " Automatic Tx Padding %s\n"
+ " Mac Loopback %s\n"
+ " Heartbeat Ignore %s\n"
+ " Carrier Sense Ignore %s\n",
+ (data[REG_TXCFG] & BIT_TXCFG_DRTH) * 32,
+ data[REG_TXCFG] & BIT_TXCFG_DRTH,
+ ((data[REG_TXCFG] & BIT_TXCFG_FLTH)>>8) * 32,
+ data[REG_TXCFG] & BIT_TXCFG_FLTH,
+ tmp ? (1<<(tmp-1))*4 : 512,
+ data[REG_TXCFG] & BIT_TXCFG_ATP ? "Enabled" : "Disabled",
+ data[REG_TXCFG] & BIT_TXCFG_MLB ? "Enabled" : "Disabled",
+ data[REG_TXCFG] & BIT_TXCFG_HBI ? "Enabled" : "Disabled",
+ data[REG_TXCFG] & BIT_TXCFG_CSI ? "Enabled" : "Disabled");
+
+
+ /* Rx descriptor pointer register */
+ fprintf(stdout,
+ "0x30: RXDP (Rx Descriptor Pointer): 0x%08x\n",
+ data[REG_RXDP]);
+
+ /* Rx configuration register */
+ fprintf(stdout,
+ "0x34: RXCFG (Rx Config): 0x%08x\n",
+ data[REG_RXCFG]);
+ tmp = (data[REG_RXCFG] & BIT_RXCFG_MXDMA)>>20;
+ fprintf(stdout,
+ " Drain Threshold = %d bytes (%d)\n"
+ " Max DMA Burst per Rx = %d bytes\n"
+ " Long Packets %s\n"
+ " Tx Packets %s\n"
+ " Runt Packets %s\n"
+ " Error Packets %s\n",
+ ((data[REG_RXCFG] & BIT_RXCFG_DRTH) >> 1) * 8,
+ (data[REG_RXCFG] & BIT_RXCFG_DRTH) >> 1,
+ tmp ? (1<<(tmp-1))*4 : 512,
+ data[REG_RXCFG] & BIT_RXCFG_ALP ? "Accepted" : "Rejected",
+ data[REG_RXCFG] & BIT_RXCFG_ATX ? "Accepted" : "Rejected",
+ data[REG_RXCFG] & BIT_RXCFG_ARP ? "Accepted" : "Rejected",
+ data[REG_RXCFG] & BIT_RXCFG_AEP ? "Accepted" : "Rejected");
+
+ /* CLKRUN control/status register */
+ fprintf(stdout,
+ "0x3c: CCSR (CLKRUN Control/Status): 0x%08x\n",
+ data[REG_CCSR]);
+ fprintf(stdout,
+ " CLKRUNN %s\n"
+ " Power Management %s\n",
+ data[REG_CCSR] & BIT_CCSR_CLKRUN_EN ? "Enabled" : "Disabled",
+ data[REG_CCSR] & BIT_CCSR_PMEEN ? "Enabled" : "Disabled");
+ if (data[REG_CCSR] & BIT_CCSR_PMESTS) fprintf(stdout,
+ " Power Management Event Pending\n");
+
+ /* WoL control/status register */
+ fprintf(stdout,
+ "0x40: WCSR (Wake-on-LAN Control/Status): 0x%08x\n",
+ data[REG_WCSR]);
+ if (data[REG_WCSR] & BIT_WCSR_WKPHY) fprintf(stdout,
+ " Wake on Phy Interrupt Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKUCP) fprintf(stdout,
+ " Wake on Unicast Packet Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKMCP) fprintf(stdout,
+ " Wake on Multicast Packet Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKBCP) fprintf(stdout,
+ " Wake on Broadcast Packet Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKARP) fprintf(stdout,
+ " Wake on Arp Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKPAT0) fprintf(stdout,
+ " Wake on Pattern 0 Match Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKPAT1) fprintf(stdout,
+ " Wake on Pattern 1 Match Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKPAT2) fprintf(stdout,
+ " Wake on Pattern 2 Match Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKPAT3) fprintf(stdout,
+ " Wake on Pattern 3 Match Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_WKMAG) fprintf(stdout,
+ " Wake on Magic Packet Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_MPSOE) fprintf(stdout,
+ " Magic Packet SecureOn Enabled\n");
+ if (data[REG_WCSR] & BIT_WCSR_SOHACK) fprintf(stdout,
+ " SecureOn Hack Detected\n");
+ if (data[REG_WCSR] & BIT_WCSR_PHYINT) fprintf(stdout,
+ " Phy Interrupt Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_UCASTR) fprintf(stdout,
+ " Unicast Packet Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_MCASTR) fprintf(stdout,
+ " Multicast Packet Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_BCASTR) fprintf(stdout,
+ " Broadcast Packet Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_ARPR) fprintf(stdout,
+ " Arp Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_PATM0) fprintf(stdout,
+ " Pattern 0 Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_PATM1) fprintf(stdout,
+ " Pattern 1 Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_PATM2) fprintf(stdout,
+ " Pattern 2 Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_PATM3) fprintf(stdout,
+ " Pattern 3 Received\n");
+ if (data[REG_WCSR] & BIT_WCSR_MPR) fprintf(stdout,
+ " Magic Packet Received\n");
+
+ /* Pause control/status register */
+ fprintf(stdout,
+ "0x44: PCR (Pause Control/Status): 0x%08x\n",
+ data[REG_PCR]);
+ fprintf(stdout,
+ " Pause Counter = %d\n"
+ " Pause %sNegotiated\n"
+ " Pause on DA %s\n"
+ " Pause on Mulitcast %s\n"
+ " Pause %s\n",
+ data[REG_PCR] & BIT_PCR_PAUSE_CNT,
+ data[REG_PCR] & BIT_PCR_PSNEG ? "" : "Not ",
+ data[REG_PCR] & BIT_PCR_PS_DA ? "Enabled" : "Disabled",
+ data[REG_PCR] & BIT_PCR_PSMCAST ? "Enabled" : "Disabled",
+ data[REG_PCR] & BIT_PCR_PSEN ? "Enabled" : "Disabled");
+ if (data[REG_PCR] & BIT_PCR_PS_RCVD) fprintf(stdout,
+ " PS_RCVD: Pause Frame Received\n");
+
+ /* Rx Filter Control */
+ fprintf(stdout,
+ "0x48: RFCR (Rx Filter Control): 0x%08x\n",
+ data[REG_RFCR]);
+ fprintf(stdout,
+ " Unicast Hash %s\n"
+ " Multicast Hash %s\n"
+ " Arp %s\n"
+ " Pattern 0 Match %s\n"
+ " Pattern 1 Match %s\n"
+ " Pattern 2 Match %s\n"
+ " Pattern 3 Match %s\n"
+ " Perfect Match %s\n"
+ " All Unicast %s\n"
+ " All Multicast %s\n"
+ " All Broadcast %s\n"
+ " Rx Filter %s\n",
+ data[REG_RFCR] & BIT_RFCR_UHEN ? "Enabled" : "Disabled",
+ data[REG_RFCR] & BIT_RFCR_MHEN ? "Enabled" : "Disabled",
+ data[REG_RFCR] & BIT_RFCR_AARP ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_APAT0 ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_APAT1 ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_APAT2 ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_APAT3 ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_APM ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_AAU ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_AAM ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_AAB ? "Accepted" : "Rejected",
+ data[REG_RFCR] & BIT_RFCR_RFEN ? "Enabled" : "Disabled");
+
+ /* Rx filter data register */
+ fprintf(stdout,
+ "0x4c: RFDR (Rx Filter Data): 0x%08x\n",
+ data[REG_RFDR]);
+ if (regs->version >= 1) fprintf(stdout,
+ " PMATCH 1-0 = 0x%08x\n"
+ " PMATCH 3-2 = 0x%08x\n"
+ " PMATCH 5-4 = 0x%08x\n"
+ " PCOUNT 1-0 = 0x%08x\n"
+ " PCOUNT 3-2 = 0x%08x\n"
+ " SOPASS 1-0 = 0x%08x\n"
+ " SOPASS 3-2 = 0x%08x\n"
+ " SOPASS 5-4 = 0x%08x\n",
+ data[REG_PMATCH0], data[REG_PMATCH1], data[REG_PMATCH2],
+ data[REG_PCOUNT0], data[REG_PCOUNT1],
+ data[REG_SOPASS0], data[REG_SOPASS1], data[REG_SOPASS2]);
+
+
+ /* Boot ROM address register */
+ fprintf(stdout,
+ "0x50: BRAR (Boot ROM Address): 0x%08x\n",
+ data[REG_BRAR]);
+ if (data[REG_BRAR] & BIT_BRAR_AUTOINC) fprintf(stdout,
+ " Automatically Increment Address\n");
+
+ /* Boot ROM data register */
+ fprintf(stdout,
+ "0x54: BRDR (Boot ROM Data): 0x%08x\n",
+ data[REG_BRDR]);
+
+ /* Silicon revison register */
+ fprintf(stdout,
+ "0x58: SRR (Silicon Revision): 0x%08x\n",
+ data[REG_SRR]);
+
+ /* Management information base control register */
+ fprintf(stdout,
+ "0x5c: MIBC (Mgmt Info Base Control): 0x%08x\n",
+ data[REG_MIBC]);
+ if (data[REG_MIBC] & BIT_MIBC_WRN) fprintf(stdout,
+ " Counter Overflow Warning\n");
+ if (data[REG_MIBC] & BIT_MIBC_FRZ) fprintf(stdout,
+ " Counters Frozen\n");
+
+ /* MIB registers */
+ fprintf(stdout,
+ "0x60: MIB[0] (Rx Errored Packets): 0x%04x\n",
+ data[REG_MIB0]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB0]);
+ fprintf(stdout,
+ "0x64: MIB[1] (Rx Frame Sequence Errors): 0x%02x\n",
+ data[REG_MIB1]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB1]);
+ fprintf(stdout,
+ "0x68: MIB[2] (Rx Missed Packets): 0x%02x\n",
+ data[REG_MIB2]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB2]);
+ fprintf(stdout,
+ "0x6c: MIB[3] (Rx Alignment Errors): 0x%02x\n",
+ data[REG_MIB3]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB3]);
+ fprintf(stdout,
+ "0x70: MIB[4] (Rx Symbol Errors): 0x%02x\n",
+ data[REG_MIB4]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB4]);
+ fprintf(stdout,
+ "0x74: MIB[5] (Rx Long Frame Errors): 0x%02x\n",
+ data[REG_MIB5]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB5]);
+ fprintf(stdout,
+ "0x78: MIB[6] (Tx Heartbeat Errors): 0x%02x\n",
+ data[REG_MIB6]);
+ fprintf(stdout, " Value = %d\n", data[REG_MIB6]);
+
+ fprintf(stdout, "\n");
+ fprintf(stdout, "Internal Phy Registers\n");
+ fprintf(stdout, "----------------------\n");
+
+ /* Basic mode control register */
+ fprintf(stdout,
+ "0x80: BMCR (Basic Mode Control): 0x%04x\n",
+ data[REG_BMCR]);
+ fprintf(stdout,
+ " %s Duplex\n"
+ " Port is Powered %s\n"
+ " Auto-Negotiation %s\n"
+ " %d Mb/s\n",
+ data[REG_BMCR] & BIT_BMCR_FDUP ? "Full" : "Half",
+ data[REG_BMCR] & BIT_BMCR_PDOWN ? "Down" : "Up",
+ data[REG_BMCR] & BIT_BMCR_ANEN ? "Enabled" : "Disabled",
+ data[REG_BMCR] & BIT_BMCR_SPEED ? 100 : 10);
+ if (data[REG_BMCR] & BIT_BMCR_ANRST) fprintf(stdout,
+ " Auto-Negotiation Restarting\n");
+ if (data[REG_BMCR] & BIT_BMCR_ISOL) fprintf(stdout,
+ " Port Isolated\n");
+ if (data[REG_BMCR] & BIT_BMCR_LOOP) fprintf(stdout,
+ " Loopback Enabled\n");
+ if (data[REG_BMCR] & BIT_BMCR_RST) fprintf(stdout,
+ " Reset In Progress\n");
+
+ /* Basic mode status register */
+ fprintf(stdout,
+ "0x84: BMSR (Basic Mode Status): 0x%04x\n",
+ data[REG_BMSR]);
+ fprintf(stdout,
+ " Link %s\n"
+ " %sCapable of Auto-Negotiation\n"
+ " Auto-Negotiation %sComplete\n"
+ " %sCapable of Preamble Suppression\n"
+ " %sCapable of 10Base-T Half Duplex\n"
+ " %sCapable of 10Base-T Full Duplex\n"
+ " %sCapable of 100Base-TX Half Duplex\n"
+ " %sCapable of 100Base-TX Full Duplex\n"
+ " %sCapable of 100Base-T4\n",
+ data[REG_BMSR] & BIT_BMSR_LNK ? "Up" : "Down",
+ data[REG_BMSR] & BIT_BMSR_ANCAP ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_ANDONE ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_PREAMBLE ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_10HCAP ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_10FCAP ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_100HCAP ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_100FCAP ? "" : "Not ",
+ data[REG_BMSR] & BIT_BMSR_100T4CAP ? "" : "Not ");
+ if (data[REG_BMSR] & BIT_BMSR_JABBER) fprintf(stdout,
+ " Jabber Condition Detected\n");
+ if (data[REG_BMSR] & BIT_BMSR_RFAULT) fprintf(stdout,
+ " Remote Fault Detected\n");
+
+ /* PHY identification registers */
+ fprintf(stdout,
+ "0x88: PHYIDR1 (PHY ID #1): 0x%04x\n",
+ data[REG_PHYIDR1]);
+ fprintf(stdout,
+ "0x8c: PHYIDR2 (PHY ID #2): 0x%04x\n",
+ data[REG_PHYIDR2]);
+ fprintf(stdout,
+ " OUI = 0x%06x\n"
+ " Model = 0x%02x (%d)\n"
+ " Revision = 0x%01x (%d)\n",
+ (data[REG_PHYIDR1] << 6) | (data[REG_PHYIDR2] >> 10),
+ (data[REG_PHYIDR2] & BIT_PHYIDR2_MODEL) >> 4 & 0x3f,
+ (data[REG_PHYIDR2] & BIT_PHYIDR2_MODEL) >> 4 & 0x3f,
+ data[REG_PHYIDR2] & BIT_PHYIDR2_REV,
+ data[REG_PHYIDR2] & BIT_PHYIDR2_REV);
+
+ /* autonegotiation advertising register */
+ fprintf(stdout,
+ "0x90: ANAR (Autoneg Advertising): 0x%04x\n",
+ data[REG_ANAR]);
+ fprintf(stdout,
+ " Protocol Selector = 0x%02x (%d)\n",
+ data[REG_ANAR] & BIT_ANAR_PROTO,
+ data[REG_ANAR] & BIT_ANAR_PROTO);
+ if (data[REG_ANAR] & BIT_ANAR_10) fprintf(stdout,
+ " Advertising 10Base-T Half Duplex\n");
+ if (data[REG_ANAR] & BIT_ANAR_10_FD) fprintf(stdout,
+ " Advertising 10Base-T Full Duplex\n");
+ if (data[REG_ANAR] & BIT_ANAR_TX) fprintf(stdout,
+ " Advertising 100Base-TX Half Duplex\n");
+ if (data[REG_ANAR] & BIT_ANAR_TXFD) fprintf(stdout,
+ " Advertising 100Base-TX Full Duplex\n");
+ if (data[REG_ANAR] & BIT_ANAR_T4) fprintf(stdout,
+ " Advertising 100Base-T4\n");
+ if (data[REG_ANAR] & BIT_ANAR_PAUSE) fprintf(stdout,
+ " Advertising Pause\n");
+ if (data[REG_ANAR] & BIT_ANAR_RF) fprintf(stdout,
+ " Indicating Remote Fault\n");
+ if (data[REG_ANAR] & BIT_ANAR_NP) fprintf(stdout,
+ " Next Page Desired\n");
+
+ /* Autonegotiation link partner ability register */
+ fprintf(stdout,
+ "0x94: ANLPAR (Autoneg Partner): 0x%04x\n",
+ data[REG_ANLPAR]);
+ fprintf(stdout,
+ " Protocol Selector = 0x%02x (%d)\n",
+ data[REG_ANLPAR] & BIT_ANLPAR_PROTO,
+ data[REG_ANLPAR] & BIT_ANLPAR_PROTO);
+ if (data[REG_ANLPAR] & BIT_ANLPAR_10) fprintf(stdout,
+ " Supports 10Base-T Half Duplex\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_10_FD) fprintf(stdout,
+ " Supports 10Base-T Full Duplex\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_TX) fprintf(stdout,
+ " Supports 100Base-TX Half Duplex\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_TXFD) fprintf(stdout,
+ " Supports 100Base-TX Full Duplex\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_T4) fprintf(stdout,
+ " Supports 100Base-T4\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_PAUSE) fprintf(stdout,
+ " Supports Pause\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_RF) fprintf(stdout,
+ " Indicates Remote Fault\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_ACK) fprintf(stdout,
+ " Indicates Acknowledgement\n");
+ if (data[REG_ANLPAR] & BIT_ANLPAR_NP) fprintf(stdout,
+ " Next Page Desired\n");
+
+ /* Autonegotiation expansion register */
+ fprintf(stdout,
+ "0x98: ANER (Autoneg Expansion): 0x%04x\n",
+ data[REG_ANER]);
+ fprintf(stdout,
+ " Link Partner Can %sAuto-Negotiate\n"
+ " Link Code Word %sReceived\n"
+ " Next Page %sSupported\n"
+ " Link Partner Next Page %sSupported\n",
+ data[REG_ANER] & BIT_ANER_LP_AN_ENABLE ? "" : "Not ",
+ data[REG_ANER] & BIT_ANER_PAGE_RX ? "" : "Not ",
+ data[REG_ANER] & BIT_ANER_NP_ABLE ? "" : "Not ",
+ data[REG_ANER] & BIT_ANER_LP_NP_ABLE ? "" : "Not ");
+ if (data[REG_ANER] & BIT_ANER_PDF) fprintf(stdout,
+ " Parallel Detection Fault\n");
+
+ /* Autonegotiation next-page tx register */
+ fprintf(stdout,
+ "0x9c: ANNPTR (Autoneg Next Page Tx): 0x%04x\n",
+ data[REG_ANNPTR]);
+
+ /* Phy status register */
+ fprintf(stdout,
+ "0xc0: PHYSTS (Phy Status): 0x%04x\n",
+ data[REG_PHYSTS]);
+ fprintf(stdout,
+ " Link %s\n"
+ " %d Mb/s\n"
+ " %s Duplex\n"
+ " Auto-Negotiation %sComplete\n"
+ " %s Polarity\n",
+ data[REG_PHYSTS] & BIT_PHYSTS_LNK ? "Up" : "Down",
+ data[REG_PHYSTS] & BIT_PHYSTS_SPD10 ? 10 : 100,
+ data[REG_PHYSTS] & BIT_PHYSTS_FDUP ? "Full" : "Half",
+ data[REG_PHYSTS] & BIT_PHYSTS_ANDONE ? "" : "Not ",
+ data[REG_PHYSTS] & BIT_PHYSTS_POL ? "Reverse" : "Normal");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_LOOP) fprintf(stdout,
+ " Loopback Enabled\n");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_JABBER) fprintf(stdout,
+ " Jabber Condition Detected\n");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_RF) fprintf(stdout,
+ " Remote Fault Detected\n");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_MINT) fprintf(stdout,
+ " MII Interrupt Detected\n");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_FC) fprintf(stdout,
+ " False Carrier Detected\n");
+ if (data[REG_PHYSTS] & BIT_PHYSTS_RXERR) fprintf(stdout,
+ " Rx Error Detected\n");
+
+ fprintf(stdout,
+ "0xc4: MICR (MII Interrupt Control): 0x%04x\n",
+ data[REG_MICR]);
+ fprintf(stdout,
+ " MII Interrupts %s\n",
+ data[REG_MICR] & BIT_MICR_INTEN ? "Enabled" : "Disabled");
+
+ fprintf(stdout,
+ "0xc8: MISR (MII Interrupt Status): 0x%04x\n",
+ data[REG_MISR]);
+ fprintf(stdout,
+ " Rx Error Counter Half-Full Interrupt %s\n"
+ " False Carrier Counter Half-Full Interrupt %s\n"
+ " Auto-Negotiation Complete Interrupt %s\n"
+ " Remote Fault Interrupt %s\n"
+ " Jabber Interrupt %s\n"
+ " Link Change Interrupt %s\n",
+ data[REG_MISR] & BIT_MISR_MSK_RHF ? "Masked" : "Enabled",
+ data[REG_MISR] & BIT_MISR_MSK_FHF ? "Masked" : "Enabled",
+ data[REG_MISR] & BIT_MISR_MSK_ANC ? "Masked" : "Enabled",
+ data[REG_MISR] & BIT_MISR_MSK_RF ? "Masked" : "Enabled",
+ data[REG_MISR] & BIT_MISR_MSK_JAB ? "Masked" : "Enabled",
+ data[REG_MISR] & BIT_MISR_MSK_LNK ? "Masked" : "Enabled");
+ if (data[REG_MISR] & BIT_MISR_MINT) fprintf(stdout,
+ " MII Interrupt Pending\n");
+
+ /* Page select register (from section of spec on 'suggested values') */
+ fprintf(stdout,
+ "0xcc: PGSEL (Phy Register Page Select): 0x%04x\n",
+ data[REG_PGSEL]);
+
+ /* counters */
+ fprintf(stdout,
+ "0xd0: FCSCR (False Carrier Counter): 0x%04x\n",
+ data[REG_FCSCR]);
+ fprintf(stdout,
+ " Value = %d\n", data[REG_FCSCR] & 0xff);
+ fprintf(stdout,
+ "0xd4: RECR (Rx Error Counter): 0x%04x\n",
+ data[REG_RECR]);
+ fprintf(stdout,
+ " Value = %d\n", data[REG_RECR] & 0xff);
+
+ /* 100 Mbit configuration register */
+ fprintf(stdout,
+ "0xd8: PCSR (100Mb/s PCS Config/Status): 0x%04x\n",
+ data[REG_PCSR]);
+ fprintf(stdout,
+ " NRZI Bypass %s\n"
+ " %s Signal Detect Algorithm\n"
+ " %s Signal Detect Operation\n"
+ " True Quiet Mode %s\n"
+ " Rx Clock is %s\n"
+ " 4B/5B Operation %s\n",
+ data[REG_PCSR] & BIT_PCSR_NRZI ? "Enabled" : "Disabled",
+ data[REG_PCSR] & BIT_PCSR_SDOPT ? "Enhanced" : "Reduced",
+ data[REG_PCSR] & BIT_PCSR_SDFORCE ? "Forced" : "Normal",
+ data[REG_PCSR] & BIT_PCSR_TQM ? "Enabled" : "Disabled",
+ data[REG_PCSR] & BIT_PCSR_CLK ?
+ "Free-Running" : "Phase-Adjusted",
+ data[REG_PCSR] & BIT_PCSR_4B5B ? "Bypassed" : "Normal");
+ if (data[REG_PCSR] & BIT_PCSR_FORCE_100) fprintf(stdout,
+ " Forced 100 Mb/s Good Link\n");
+
+ /* Phy control register */
+ fprintf(stdout,
+ "0xe4: PHYCR (Phy Control): 0x%04x\n",
+ data[REG_PHYCR]);
+ fprintf(stdout,
+ " Phy Address = 0x%x (%d)\n"
+ " %sPause Compatible with Link Partner\n"
+ " LED Stretching %s\n"
+ " Phy Self Test %s\n"
+ " Self Test Sequence = PSR%d\n",
+ data[REG_PHYCR] & BIT_PHYCR_PHYADDR,
+ data[REG_PHYCR] & BIT_PHYCR_PHYADDR,
+ data[REG_PHYCR] & BIT_PHYCR_PAUSE_STS ? "" : "Not ",
+ data[REG_PHYCR] & BIT_PHYCR_STRETCH ? "Bypassed" : "Enabled",
+ data[REG_PHYCR] & BIT_PHYCR_BIST ? "In Progress" :
+ data[REG_PHYCR] & BIT_PHYCR_BIST_STAT ?
+ "Passed" : "Failed or Not Run",
+ data[REG_PHYCR] & BIT_PHYCR_PSR15 ? 15 : 9);
+
+
+ /* 10 Mbit control and status register */
+ fprintf(stdout,
+ "0xe8: TBTSCR (10Base-T Status/Control): 0x%04x\n",
+ data[REG_TBTSCR]);
+ fprintf(stdout,
+ " Jabber %s\n"
+ " Heartbeat %s\n"
+ " Polarity Auto-Sense/Correct %s\n"
+ " %s Polarity %s\n"
+ " Normal Link Pulse %s\n"
+ " 10 Mb/s Loopback %s\n",
+ data[REG_TBTSCR] & BIT_TBTSCR_JAB ? "Disabled" : "Enabled",
+ data[REG_TBTSCR] & BIT_TBTSCR_BEAT ? "Disabled" : "Enabled",
+ data[REG_TBTSCR] & BIT_TBTSCR_AUTOPOL ? "Disabled" : "Enabled",
+ data[REG_TBTSCR] & BIT_TBTSCR_AUTOPOL ?
+ data[REG_TBTSCR]&BIT_TBTSCR_FPOL ? "Reverse":"Normal" :
+ data[REG_TBTSCR]&BIT_TBTSCR_POL ? "Reverse":"Normal",
+ data[REG_TBTSCR] & BIT_TBTSCR_AUTOPOL ? "Forced" : "Detected",
+ data[REG_TBTSCR] & BIT_TBTSCR_PULSE ? "Disabled" : "Enabled",
+ data[REG_TBTSCR] & BIT_TBTSCR_LOOP ? "Enabled" : "Disabled");
+ if (data[REG_TBTSCR] & BIT_TBTSCR_FORCE_10) fprintf(stdout,
+ " Forced 10 Mb/s Good Link\n");
+
+ /* the spec says to set these */
+ fprintf(stdout, "\n");
+ fprintf(stdout, "'Magic' Phy Registers\n");
+ fprintf(stdout, "---------------------\n");
+ fprintf(stdout,
+ "0xe4: PMDCSR: 0x%04x\n",
+ data[REG_PMDCSR]);
+ fprintf(stdout,
+ "0xf4: DSPCFG: 0x%04x\n",
+ data[REG_DSPCFG]);
+ fprintf(stdout,
+ "0xf8: SDCFG: 0x%04x\n",
+ data[REG_SDCFG]);
+ fprintf(stdout,
+ "0xfc: TSTDAT: 0x%04x\n",
+ data[REG_TSTDAT]);
+
+ return 0;
+}
+
+int
+natsemi_dump_eeprom(struct ethtool_drvinfo *info __maybe_unused,
+ struct ethtool_eeprom *ee)
+{
+ u16 *eebuf = (u16 *)ee->data;
+ unsigned int i;
+
+ if (ee->magic != NATSEMI_MAGIC) {
+ fprintf(stderr, "Magic number 0x%08x does not match 0x%08x\n",
+ ee->magic, NATSEMI_MAGIC);
+ return -1;
+ }
+
+ fprintf(stdout, "Address\tData\n");
+ fprintf(stdout, "-------\t------\n");
+ for (i = 0; i < ee->len/2; i++) {
+ fprintf(stdout, "0x%02x \t0x%04x\n", i + ee->offset, eebuf[i]);
+ }
+
+ return 0;
+}
+