Adding upstream version 115.8.0esr.upstream/115.8.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 477 insertions, 0 deletions

diff --git a/third_party/aom/test/tools_common.sh b/third_party/aom/test/tools_common.sh
new file mode 100755
index 0000000000..c087106060
--- /dev/null
+++ b/third_party/aom/test/tools_common.sh
@@ -0,0 +1,477 @@
+#!/bin/sh
+## Copyright (c) 2016, Alliance for Open Media. All rights reserved
+##
+## This source code is subject to the terms of the BSD 2 Clause License and
+## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
+## was not distributed with this source code in the LICENSE file, you can
+## obtain it at www.aomedia.org/license/software. If the Alliance for Open
+## Media Patent License 1.0 was not distributed with this source code in the
+## PATENTS file, you can obtain it at www.aomedia.org/license/patent.
+##
+##  This file contains shell code shared by test scripts for libaom tools.
+
+# Use $AOM_TEST_TOOLS_COMMON_SH as a pseudo include guard.
+if [ -z "${AOM_TEST_TOOLS_COMMON_SH}" ]; then
+AOM_TEST_TOOLS_COMMON_SH=included
+
+set -e
+devnull='> /dev/null 2>&1'
+AOM_TEST_PREFIX=""
+
+elog() {
+  echo "$@" 1>&2
+}
+
+vlog() {
+  if [ "${AOM_TEST_VERBOSE_OUTPUT}" = "yes" ]; then
+    echo "$@"
+  fi
+}
+
+# Sets $AOM_TOOL_TEST to the name specified by positional parameter one.
+test_begin() {
+  AOM_TOOL_TEST="${1}"
+}
+
+# Clears the AOM_TOOL_TEST variable after confirming that $AOM_TOOL_TEST matches
+# positional parameter one.
+test_end() {
+  if [ "$1" != "${AOM_TOOL_TEST}" ]; then
+    echo "FAIL completed test mismatch!."
+    echo "  completed test: ${1}"
+    echo "  active test: ${AOM_TOOL_TEST}."
+    return 1
+  fi
+  AOM_TOOL_TEST='<unset>'
+}
+
+# Echoes the target configuration being tested.
+test_configuration_target() {
+  aom_config_c="${LIBAOM_CONFIG_PATH}/config/aom_config.c"
+  # Clean up the cfg pointer line from aom_config.c for easier re-use by
+  # someone examining a failure in the example tests.
+  # 1. Run grep on aom_config.c for cfg and limit the results to 1.
+  # 2. Split the line using ' = ' as separator.
+  # 3. Abuse sed to consume the leading " and trailing "; from the assignment
+  #    to the cfg pointer.
+  cmake_config=$(awk -F ' = ' '/cfg/ { print $NF; exit }' "${aom_config_c}" \
+    | sed -e s/\"// -e s/\"\;//)
+  echo cmake generated via command: cmake path/to/aom ${cmake_config}
+}
+
+# Trap function used for failure reports and tool output directory removal.
+# When the contents of $AOM_TOOL_TEST do not match the string '<unset>', reports
+# failure of test stored in $AOM_TOOL_TEST.
+cleanup() {
+  if [ -n "${AOM_TOOL_TEST}" ] && [ "${AOM_TOOL_TEST}" != '<unset>' ]; then
+    echo "FAIL: $AOM_TOOL_TEST"
+  fi
+  if [ "${AOM_TEST_PRESERVE_OUTPUT}" = "yes" ]; then
+    return
+  fi
+  if [ -n "${AOM_TEST_OUTPUT_DIR}" ] && [ -d "${AOM_TEST_OUTPUT_DIR}" ]; then
+    rm -rf "${AOM_TEST_OUTPUT_DIR}"
+  fi
+}
+
+# Echoes the version string assigned to the VERSION_STRING_NOSP variable defined
+# in $LIBAOM_CONFIG_PATH/config/aom_version.h to stdout.
+cmake_version() {
+  aom_version_h="${LIBAOM_CONFIG_PATH}/config/aom_version.h"
+
+  # Find VERSION_STRING_NOSP line, split it with '"' and print the next to last
+  # field to output the version string to stdout.
+  aom_version=$(awk -F \" '/VERSION_STRING_NOSP/ {print $(NF-1)}' \
+    "${aom_version_h}")
+  echo "v${aom_version}"
+}
+
+# Echoes current git version as reported by running 'git describe', or the
+# version used by the cmake build when git is unavailable.
+source_version() {
+  if git --version > /dev/null 2>&1; then
+    (cd "$(dirname "${0}")"
+    git describe)
+  else
+    cmake_version
+  fi
+}
+
+# Echoes warnings to stdout when source version and CMake build generated
+# version are out of sync.
+check_version_strings() {
+  cmake_version=$(cmake_version)
+  source_version=$(source_version)
+
+  if [ "${cmake_version}" != "${source_version}" ]; then
+    echo "Warning: version has changed since last cmake run."
+    vlog "  cmake version: ${cmake_version} version now: ${source_version}"
+  fi
+}
+
+# $1 is the name of an environment variable containing a directory name to
+# test.
+test_env_var_dir() {
+  local dir=$(eval echo "\${$1}")
+  if [ ! -d "${dir}" ]; then
+    elog "'${dir}': No such directory"
+    elog "The $1 environment variable must be set to a valid directory."
+    return 1
+  fi
+}
+
+# This script requires that the LIBAOM_BIN_PATH, LIBAOM_CONFIG_PATH, and
+# LIBAOM_TEST_DATA_PATH variables are in the environment: Confirm that
+# the variables are set and that they all evaluate to directory paths.
+verify_aom_test_environment() {
+  test_env_var_dir "LIBAOM_BIN_PATH" \
+    && test_env_var_dir "LIBAOM_CONFIG_PATH" \
+    && test_env_var_dir "LIBAOM_TEST_DATA_PATH"
+}
+
+# Greps aom_config.h in LIBAOM_CONFIG_PATH for positional parameter one, which
+# should be a LIBAOM preprocessor flag. Echoes yes to stdout when the feature
+# is available.
+aom_config_option_enabled() {
+  aom_config_option="${1}"
+  aom_config_file="${LIBAOM_CONFIG_PATH}/config/aom_config.h"
+  config_line=$(grep "${aom_config_option}" "${aom_config_file}")
+  if echo "${config_line}" | egrep -q '1$'; then
+    echo yes
+  fi
+}
+
+# Echoes yes when output of test_configuration_target() contains win32 or win64.
+is_windows_target() {
+  if test_configuration_target \
+     | grep -q -e win32 -e win64 > /dev/null 2>&1; then
+    echo yes
+  fi
+}
+
+# Echoes path to $1 when it's executable and exists in one of the directories
+# included in $tool_paths, or an empty string. Caller is responsible for testing
+# the string once the function returns.
+aom_tool_path() {
+  local tool_name="$1"
+  local root_path="${LIBAOM_BIN_PATH}"
+  local suffix="${AOM_TEST_EXE_SUFFIX}"
+  local tool_paths="\
+    ${root_path}/${tool_name}${suffix} \
+    ${root_path}/../${tool_name}${suffix} \
+    ${root_path}/tools/${tool_name}${suffix} \
+    ${root_path}/../tools/${tool_name}${suffix}"
+
+  local toolpath=""
+
+  for tool_path in ${tool_paths}; do
+    if [ -x "${tool_path}" ] && [ -f "${tool_path}" ]; then
+      echo "${tool_path}"
+      return 0
+    fi
+  done
+
+  return 1
+}
+
+# Echoes yes to stdout when the file named by positional parameter one exists
+# in LIBAOM_BIN_PATH, and is executable.
+aom_tool_available() {
+  local tool_name="$1"
+  local tool="${LIBAOM_BIN_PATH}/${tool_name}${AOM_TEST_EXE_SUFFIX}"
+  [ -x "${tool}" ] && echo yes
+}
+
+# Echoes yes to stdout when aom_config_option_enabled() reports yes for
+# CONFIG_AV1_DECODER.
+av1_decode_available() {
+  [ "$(aom_config_option_enabled CONFIG_AV1_DECODER)" = "yes" ] && echo yes
+}
+
+# Echoes yes to stdout when aom_config_option_enabled() reports yes for
+# CONFIG_AV1_ENCODER.
+av1_encode_available() {
+  [ "$(aom_config_option_enabled CONFIG_AV1_ENCODER)" = "yes" ] && echo yes
+}
+
+# Echoes "fast" encode params for use with aomenc.
+aomenc_encode_test_fast_params() {
+  echo "--cpu-used=1
+        --limit=${AV1_ENCODE_TEST_FRAME_LIMIT}
+        --lag-in-frames=0
+        --test-decode=fatal"
+}
+
+# Echoes yes to stdout when aom_config_option_enabled() reports yes for
+# CONFIG_WEBM_IO.
+webm_io_available() {
+  [ "$(aom_config_option_enabled CONFIG_WEBM_IO)" = "yes" ] && echo yes
+}
+
+# Filters strings from $1 using the filter specified by $2. Filter behavior
+# depends on the presence of $3. When $3 is present, strings that match the
+# filter are excluded. When $3 is omitted, strings matching the filter are
+# included.
+# The filtered result is echoed to stdout.
+filter_strings() {
+  strings=${1}
+  filter=${2}
+  exclude=${3}
+
+  if [ -n "${exclude}" ]; then
+    # When positional parameter three exists the caller wants to remove strings.
+    # Tell grep to invert matches using the -v argument.
+    exclude='-v'
+  else
+    unset exclude
+  fi
+
+  if [ -n "${filter}" ]; then
+    for s in ${strings}; do
+      if echo "${s}" | egrep -q ${exclude} "${filter}" > /dev/null 2>&1; then
+        filtered_strings="${filtered_strings} ${s}"
+      fi
+    done
+  else
+    filtered_strings="${strings}"
+  fi
+  echo "${filtered_strings}"
+}
+
+# Runs user test functions passed via positional parameters one and two.
+# Functions in positional parameter one are treated as environment verification
+# functions and are run unconditionally. Functions in positional parameter two
+# are run according to the rules specified in aom_test_usage().
+run_tests() {
+  local env_tests="verify_aom_test_environment $1"
+  local tests_to_filter="$2"
+  local test_name="${AOM_TEST_NAME}"
+
+  if [ -z "${test_name}" ]; then
+    test_name="$(basename "${0%.*}")"
+  fi
+
+  if [ "${AOM_TEST_RUN_DISABLED_TESTS}" != "yes" ]; then
+    # Filter out DISABLED tests.
+    tests_to_filter=$(filter_strings "${tests_to_filter}" ^DISABLED exclude)
+  fi
+
+  if [ -n "${AOM_TEST_FILTER}" ]; then
+    # Remove tests not matching the user's filter.
+    tests_to_filter=$(filter_strings "${tests_to_filter}" ${AOM_TEST_FILTER})
+  fi
+
+  # User requested test listing: Dump test names and return.
+  if [ "${AOM_TEST_LIST_TESTS}" = "yes" ]; then
+    for test_name in $tests_to_filter; do
+      echo ${test_name}
+    done
+    return
+  fi
+
+  # Don't bother with the environment tests if everything else was disabled.
+  [ -z "${tests_to_filter}" ] && return
+
+  # Combine environment and actual tests.
+  local tests_to_run="${env_tests} ${tests_to_filter}"
+
+  check_version_strings
+
+  # Run tests.
+  for test in ${tests_to_run}; do
+    test_begin "${test}"
+    vlog "  RUN  ${test}"
+    "${test}"
+    vlog "  PASS ${test}"
+    test_end "${test}"
+  done
+
+  local tested_config="$(test_configuration_target) @ $(source_version)"
+  echo "${test_name}: Done, all tests pass for ${tested_config}."
+}
+
+aom_test_usage() {
+cat << EOF
+  Usage: ${0##*/} [arguments]
+    --bin-path <path to libaom binaries directory>
+    --config-path <path to libaom config directory>
+    --filter <filter>: User test filter. Only tests matching filter are run.
+    --run-disabled-tests: Run disabled tests.
+    --help: Display this message and exit.
+    --test-data-path <path to libaom test data directory>
+    --show-program-output: Shows output from all programs being tested.
+    --prefix: Allows for a user specified prefix to be inserted before all test
+              programs. Grants the ability, for example, to run test programs
+              within valgrind.
+    --list-tests: List all test names and exit without actually running tests.
+    --verbose: Verbose output.
+
+    When the --bin-path option is not specified the script attempts to use
+    \$LIBAOM_BIN_PATH and then the current directory.
+
+    When the --config-path option is not specified the script attempts to use
+    \$LIBAOM_CONFIG_PATH and then the current directory.
+
+    When the -test-data-path option is not specified the script attempts to use
+    \$LIBAOM_TEST_DATA_PATH and then the current directory.
+EOF
+}
+
+# Returns non-zero (failure) when required environment variables are empty
+# strings.
+aom_test_check_environment() {
+  if [ -z "${LIBAOM_BIN_PATH}" ] || \
+     [ -z "${LIBAOM_CONFIG_PATH}" ] || \
+     [ -z "${LIBAOM_TEST_DATA_PATH}" ]; then
+    return 1
+  fi
+}
+
+# Echo aomenc command line parameters allowing use of a raw yuv file as
+# input to aomenc.
+yuv_raw_input() {
+  echo ""${YUV_RAW_INPUT}"
+       --width="${YUV_RAW_INPUT_WIDTH}"
+       --height="${YUV_RAW_INPUT_HEIGHT}""
+}
+
+# Do a small encode for testing decoders.
+encode_yuv_raw_input_av1() {
+  if [ "$(av1_encode_available)" = "yes" ]; then
+    local output="$1"
+    local encoder="$(aom_tool_path aomenc)"
+    shift
+    eval "${encoder}" $(yuv_raw_input) \
+      $(aomenc_encode_test_fast_params) \
+      --output="${output}" \
+      $@ \
+      ${devnull}
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+# Parse the command line.
+while [ -n "$1" ]; do
+  case "$1" in
+    --bin-path)
+      LIBAOM_BIN_PATH="$2"
+      shift
+      ;;
+    --config-path)
+      LIBAOM_CONFIG_PATH="$2"
+      shift
+      ;;
+    --filter)
+      AOM_TEST_FILTER="$2"
+      shift
+      ;;
+    --run-disabled-tests)
+      AOM_TEST_RUN_DISABLED_TESTS=yes
+      ;;
+    --help)
+      aom_test_usage
+      exit
+      ;;
+    --test-data-path)
+      LIBAOM_TEST_DATA_PATH="$2"
+      shift
+      ;;
+    --prefix)
+      AOM_TEST_PREFIX="$2"
+      shift
+      ;;
+    --verbose)
+      AOM_TEST_VERBOSE_OUTPUT=yes
+      ;;
+    --show-program-output)
+      devnull=
+      ;;
+    --list-tests)
+      AOM_TEST_LIST_TESTS=yes
+      ;;
+    *)
+      aom_test_usage
+      exit 1
+      ;;
+  esac
+  shift
+done
+
+# Handle running the tests from a build directory without arguments when running
+# the tests on *nix/macosx.
+LIBAOM_BIN_PATH="${LIBAOM_BIN_PATH:-.}"
+LIBAOM_CONFIG_PATH="${LIBAOM_CONFIG_PATH:-.}"
+LIBAOM_TEST_DATA_PATH="${LIBAOM_TEST_DATA_PATH:-.}"
+
+# Create a temporary directory for output files, and a trap to clean it up.
+if [ -n "${TMPDIR}" ]; then
+  AOM_TEST_TEMP_ROOT="${TMPDIR}"
+elif [ -n "${TEMPDIR}" ]; then
+  AOM_TEST_TEMP_ROOT="${TEMPDIR}"
+else
+  AOM_TEST_TEMP_ROOT=/tmp
+fi
+
+AOM_TEST_OUTPUT_DIR="${AOM_TEST_OUTPUT_DIR:-${AOM_TEST_TEMP_ROOT}/aom_test_$$}"
+
+if ! mkdir -p "${AOM_TEST_OUTPUT_DIR}" || \
+   [ ! -d "${AOM_TEST_OUTPUT_DIR}" ]; then
+  echo "${0##*/}: Cannot create output directory, giving up."
+  echo "${0##*/}:   AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}"
+  exit 1
+fi
+
+AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT:-no}
+
+if [ "$(is_windows_target)" = "yes" ]; then
+  AOM_TEST_EXE_SUFFIX=".exe"
+fi
+
+# Variables shared by tests.
+AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED:-1}
+AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT:-5}
+AV1_IVF_FILE="${AV1_IVF_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.ivf}"
+AV1_OBU_ANNEXB_FILE="${AV1_OBU_ANNEXB_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.annexb.obu}"
+AV1_OBU_SEC5_FILE="${AV1_OBU_SEC5_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.section5.obu}"
+AV1_WEBM_FILE="${AV1_WEBM_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.webm}"
+
+YUV_RAW_INPUT="${LIBAOM_TEST_DATA_PATH}/hantro_collage_w352h288.yuv"
+YUV_RAW_INPUT_WIDTH=352
+YUV_RAW_INPUT_HEIGHT=288
+
+Y4M_NOSQ_PAR_INPUT="${LIBAOM_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m"
+Y4M_720P_INPUT="${LIBAOM_TEST_DATA_PATH}/niklas_1280_720_30.y4m"
+
+# Setup a trap function to clean up after tests complete.
+trap cleanup EXIT
+
+vlog "$(basename "${0%.*}") test configuration:
+  LIBAOM_BIN_PATH=${LIBAOM_BIN_PATH}
+  LIBAOM_CONFIG_PATH=${LIBAOM_CONFIG_PATH}
+  LIBAOM_TEST_DATA_PATH=${LIBAOM_TEST_DATA_PATH}
+  AOM_TEST_EXE_SUFFIX=${AOM_TEST_EXE_SUFFIX}
+  AOM_TEST_FILTER=${AOM_TEST_FILTER}
+  AOM_TEST_LIST_TESTS=${AOM_TEST_LIST_TESTS}
+  AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}
+  AOM_TEST_PREFIX=${AOM_TEST_PREFIX}
+  AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT}
+  AOM_TEST_RUN_DISABLED_TESTS=${AOM_TEST_RUN_DISABLED_TESTS}
+  AOM_TEST_SHOW_PROGRAM_OUTPUT=${AOM_TEST_SHOW_PROGRAM_OUTPUT}
+  AOM_TEST_TEMP_ROOT=${AOM_TEST_TEMP_ROOT}
+  AOM_TEST_VERBOSE_OUTPUT=${AOM_TEST_VERBOSE_OUTPUT}
+  AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED}
+  AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT}
+  AV1_IVF_FILE=${AV1_IVF_FILE}
+  AV1_OBU_ANNEXB_FILE=${AV1_OBU_ANNEXB_FILE}
+  AV1_OBU_SEC5_FILE=${AV1_OBU_SEC5_FILE}
+  AV1_WEBM_FILE=${AV1_WEBM_FILE}
+  YUV_RAW_INPUT=${YUV_RAW_INPUT}
+  YUV_RAW_INPUT_WIDTH=${YUV_RAW_INPUT_WIDTH}
+  YUV_RAW_INPUT_HEIGHT=${YUV_RAW_INPUT_HEIGHT}
+  Y4M_NOSQ_PAR_INPUT=${Y4M_NOSQ_PAR_INPUT}"
+
+fi  # End $AOM_TEST_TOOLS_COMMON_SH pseudo include guard.