summaryrefslogtreecommitdiffstats
path: root/security/nss/lib/jar/jzlib.h
diff options
context:
space:
mode:
Diffstat (limited to 'security/nss/lib/jar/jzlib.h')
-rw-r--r--security/nss/lib/jar/jzlib.h916
1 files changed, 916 insertions, 0 deletions
diff --git a/security/nss/lib/jar/jzlib.h b/security/nss/lib/jar/jzlib.h
new file mode 100644
index 0000000000..92d3d5b21e
--- /dev/null
+++ b/security/nss/lib/jar/jzlib.h
@@ -0,0 +1,916 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.0.4, Jul 24th, 1996.
+
+ Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ gzip@prep.ai.mit.edu madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+/* This file was modified since it was taken from the zlib distribution */
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef MOZILLA_CLIENT
+#include "jzconf.h"
+#else
+#include "zconf.h"
+#endif
+
+#define ZLIB_VERSION "1.0.4"
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms may be added later and will have the same
+ stream interface.
+
+ For compression the application must provide the output buffer and
+ may optionally provide the input buffer for optimization. For decompression,
+ the application must provide the input buffer and may optionally provide
+ the output buffer for optimization.
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The library does not install any signal handler. It is recommended to
+ add at least a handler for SIGSEGV when decompressing; the library checks
+ the consistency of the input data whenever possible but may go nuts
+ for some forms of corrupted input.
+*/
+
+typedef voidpf(*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void(*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: ascii or binary */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ The application must update next_in and avail_in when avail_in has
+ dropped to zero. It must update next_out and avail_out when avail_out
+ has dropped to zero. The application must initialize zalloc, zfree and
+ opaque before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by zalloc for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or
+ progress reports. After compression, total_in holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step).
+*/
+
+/* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+/* basic functions */
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(const char *)
+zlibVersion(void);
+#else
+extern const char *EXPORT zlibVersion OF((void));
+#endif
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ This check is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+extern int EXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller.
+ If zalloc and zfree are set to Z_NULL, deflateInit updates them to
+ use default allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ msg is set to null if there is no error message. deflateInit does not
+ perform any compression: this will be done by deflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflate(z_streamp strm, int flush);
+#else
+extern int EXPORT deflate OF((z_streamp strm, int flush));
+#endif
+/*
+ Performs one or both of the following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating avail_in or avail_out accordingly; avail_out
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+ and with zero avail_out, it must be called again after making room in the
+ output buffer because there might be more output pending.
+
+ If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
+ block is terminated and flushed to the output buffer so that the
+ decompressor can get all input data available so far. For method 9, a future
+ variant on method 8, the current block will be flushed but not terminated.
+ Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
+ output is byte aligned (the compressor can clear its internal bit buffer)
+ and the current block is always terminated; this can be useful if the
+ compressor has to be restarted from scratch after an interruption (in which
+ case the internal state of the compressor may be lost).
+ If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
+ special marker is output and the compression dictionary is discarded; this
+ is useful to allow the decompressor to synchronize if one compressed block
+ has been damaged (see inflateSync below). Flushing degrades compression and
+ so should be used only when necessary. Using Z_FULL_FLUSH too often can
+ seriously degrade the compression. If deflate returns with avail_out == 0,
+ this function must be called again with the same value of the flush
+ parameter and more output space (updated avail_out), until the flush is
+ complete (deflate returns with non-zero avail_out).
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there
+ was enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the
+ stream are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least
+ 0.1% larger than avail_in plus 12 bytes. If deflate does not return
+ Z_STREAM_END, then it must be called again as described above.
+
+ deflate() may update data_type if it can make a good guess about
+ the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateEnd(z_streamp strm);
+#else
+extern int EXPORT deflateEnd OF((z_streamp strm));
+#endif
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ msg may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+/*
+extern int EXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
+ allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
+ with the version assumed by the caller. msg is set to null if there is no
+ error message. inflateInit does not perform any decompression: this will be
+ done by inflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+inflate(z_streamp strm, int flush);
+#else
+extern int EXPORT inflate OF((z_streamp strm, int flush));
+#endif
+/*
+ Performs one or both of the following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing
+ will resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there
+ is no more input data or no more space in the output buffer (see below
+ about the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (avail_out == 0), or after each
+ call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+
+ If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much
+ output as possible to the output buffer. The flushing behavior of inflate is
+ not specified for values of the flush parameter other than Z_PARTIAL_FLUSH
+ and Z_FINISH, but the current implementation actually flushes as much output
+ as possible anyway.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of inflate), the parameter flush should be set to
+ Z_FINISH. In this case all pending input is processed and all pending
+ output is flushed; avail_out must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+ is never required, but can be used to inform inflate that a faster routine
+ may be used for the single inflate() call.
+
+ inflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if the end of the
+ compressed data has been reached and all uncompressed output has been
+ produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
+ inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
+ Z_STREAM_ERROR if the stream structure was inconsistent (for example if
+ next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in
+ the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
+ application may then call inflateSync to look for a good compression block.
+ In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
+ dictionary chosen by the compressor.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+inflateEnd(z_streamp strm);
+#else
+extern int EXPORT inflateEnd OF((z_streamp strm));
+#endif
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+/* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+extern int EXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by
+ the caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library. (Method 9 will allow a 64K history buffer and
+ partial block flushes.)
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library (the value 16 will be allowed for method 9). Larger
+ values of this parameter result in better compression at the expense of
+ memory usage. The default value is 15 if deflateInit is used instead.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to compress them better. The effect of Z_FILTERED is to force more
+ Huffman coding and less string matching; it is somewhat intermediate
+ between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.
+
+ If next_in is not null, the library will use this buffer to hold also
+ some history information; the buffer must either hold the entire input
+ data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
+ is null, the library will allocate its own history buffer (and leave next_in
+ null). next_out need not be provided here but must be provided by the
+ application for the next call of deflate().
+
+ If the history buffer is provided by the application, next_in must
+ must never be changed by the application since the compressor maintains
+ information inside this buffer from call to call; the application
+ must provide more input only by increasing avail_in. next_in is always
+ reset by the library in this case.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+ not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+ an invalid method). msg is set to null if there is no error message.
+ deflateInit2 does not perform any compression: this will be done by
+ deflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateSetDictionary(z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength);
+#else
+extern int EXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+#endif
+/*
+ Initializes the compression dictionary (history buffer) from the given
+ byte sequence without producing any compressed output. This function must
+ be called immediately after deflateInit or deflateInit2, before any call
+ of deflate. The compressor and decompressor must use exactly the same
+ dictionary (see inflateSetDictionary).
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and
+ can be predicted with good accuracy; the data can then be compressed better
+ than with the default empty dictionary. In this version of the library,
+ only the last 32K bytes of the dictionary are used.
+ Upon return of this function, strm->adler is set to the Adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state
+ is inconsistent (for example if deflate has already been called for this
+ stream). deflateSetDictionary does not perform any compression: this will
+ be done by deflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateCopy(z_streamp dest, z_streamp source);
+#else
+extern int EXPORT deflateCopy OF((z_streamp dest, z_streamp source));
+#endif
+/*
+ Sets the destination stream as a complete copy of the source stream. If
+ the source stream is using an application-supplied history buffer, a new
+ buffer is allocated for the destination stream. The compressed output
+ buffer is always application-supplied. It's the responsibility of the
+ application to provide the correct values of next_out and avail_out for the
+ next call of deflate.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and
+ can consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateReset(z_streamp strm);
+#else
+extern int EXPORT deflateReset OF((z_streamp strm));
+#endif
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateParams(z_streamp strm, int level, int strategy);
+#else
+extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
+#endif
+/*
+ Dynamically update the compression level and compression strategy.
+ This can be used to switch between compression and straight copy of
+ the input data, or to switch to a different kind of input data requiring
+ a different strategy. If the compression level is changed, the input
+ available so far is compressed with the old level (and may be flushed);
+ the new level will take effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to
+ be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+ if strm->avail_out was zero.
+*/
+
+/*
+extern int EXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with more compression options. The
+ fields next_out, zalloc, zfree and opaque must be initialized before by
+ the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library (the value 16 will be allowed soon). The
+ default value is 15 if inflateInit is used instead. If a compressed stream
+ with a larger window size is given as input, inflate() will return with
+ the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ If next_out is not null, the library will use this buffer for the history
+ buffer; the buffer must either be large enough to hold the entire output
+ data, or have at least 1<<windowBits bytes. If next_out is null, the
+ library will allocate its own buffer (and leave next_out null). next_in
+ need not be provided here but must be provided by the application for the
+ next call of inflate().
+
+ If the history buffer is provided by the application, next_out must
+ never be changed by the application since the decompressor maintains
+ history information inside this buffer from call to call; the application
+ can only reset next_out to the beginning of the history buffer when
+ avail_out is zero and all output has been consumed.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+ not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+ windowBits < 8). msg is set to null if there is no error message.
+ inflateInit2 does not perform any decompression: this will be done by
+ inflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+inflateSetDictionary(z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength);
+#else
+extern int EXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+#endif
+/*
+ Initializes the decompression dictionary (history buffer) from the given
+ uncompressed byte sequence. This function must be called immediately after
+ a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
+ by the compressor can be determined from the Adler32 value returned by this
+ call of inflate. The compressor and decompressor must use exactly the same
+ dictionary (see deflateSetDictionary).
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect Adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+inflateSync(z_streamp strm);
+#else
+extern int EXPORT inflateSync OF((z_streamp strm));
+#endif
+/*
+ Skips invalid compressed data until the special marker (see deflate()
+ above) can be found, or until all available input is skipped. No output
+ is provided.
+
+ inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no marker has been found,
+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of total_in which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call inflateSync, providing more input each time,
+ until success or end of the input data.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+inflateReset(z_streamp strm);
+#else
+extern int EXPORT inflateReset OF((z_streamp strm));
+#endif
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+/* utility functions */
+
+/*
+ The following utility functions are implemented on top of the
+ basic stream-oriented functions. To simplify the interface, some
+ default options are assumed (compression level, window size,
+ standard memory allocation functions). The source code of these
+ utility functions can easily be modified if you need special options.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+compress(Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen);
+#else
+extern int EXPORT compress OF((Bytef * dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+#endif
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be at least 0.1% larger than
+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+ compressed buffer.
+ This function can be used to compress a whole file at once if the
+ input file is mmap'ed.
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+uncompress(Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen);
+#else
+extern int EXPORT uncompress OF((Bytef * dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+#endif
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer.
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+
+typedef voidp gzFile;
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(gzFile)
+gzopen(const char *path, const char *mode);
+#else
+extern gzFile EXPORT gzopen OF((const char *path, const char *mode));
+#endif
+/*
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb") but can also include a compression level
+ ("wb9"). gzopen can be used to read a file which is not in gzip format;
+ in this case gzread will directly read from the file without decompression.
+ gzopen returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression state; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is Z_MEM_ERROR).
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(gzFile)
+gzdopen(int fd, const char *mode);
+#else
+extern gzFile EXPORT gzdopen OF((int fd, const char *mode));
+#endif
+/*
+ gzdopen() associates a gzFile with the file descriptor fd. File
+ descriptors are obtained from calls like open, dup, creat, pipe or
+ fileno (in the file has been previously opened with fopen).
+ The mode parameter is as in gzopen.
+ The next call of gzclose on the returned gzFile will also close the
+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+ descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
+ gzdopen returns NULL if there was insufficient memory to allocate
+ the (de)compression state.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+gzread(gzFile file, voidp buf, unsigned len);
+#else
+extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+#endif
+/*
+ Reads the given number of uncompressed bytes from the compressed file.
+ If the input file was not in gzip format, gzread copies the given number
+ of bytes into the buffer.
+ gzread returns the number of uncompressed bytes actually read (0 for
+ end of file, -1 for error). */
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+gzwrite(gzFile file, const voidp buf, unsigned len);
+#else
+extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len));
+#endif
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes actually written
+ (0 in case of error).
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+gzflush(gzFile file, int flush);
+#else
+extern int EXPORT gzflush OF((gzFile file, int flush));
+#endif
+/*
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the deflate() function. The return value is the zlib
+ error number (see function gzerror below). gzflush returns Z_OK if
+ the flush parameter is Z_FINISH and all output could be flushed.
+ gzflush should be called only when strictly necessary because it can
+ degrade compression.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+gzclose(gzFile file);
+#else
+extern int EXPORT gzclose OF((gzFile file));
+#endif
+/*
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression state. The return value is the zlib
+ error number (see function gzerror below).
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(const char *)
+gzerror(gzFile file, int *errnum);
+#else
+extern const char *EXPORT gzerror OF((gzFile file, int *errnum));
+#endif
+/*
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to Z_ERRNO and the application may consult errno
+ to get the exact error code.
+*/
+
+/* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the
+ compression library.
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(uLong)
+adler32(uLong adler, const Bytef *buf, uInt len);
+#else
+extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+#endif
+
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(uLong)
+crc32(uLong crc, const Bytef *buf, uInt len);
+#else
+extern uLong EXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+#endif
+/*
+ Update a running crc with the bytes buf[0..len-1] and return the updated
+ crc. If buf is NULL, this function returns the required initial value
+ for the crc. Pre- and post-conditioning (one's complement) is performed
+ within this function so it shouldn't be done by the application.
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+/* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+#ifdef MOZILLA_CLIENT
+PR_EXTERN(int)
+deflateInit(z_streamp strm, int level, const char *version,
+ int stream_size);
+PR_EXTERN(int)
+inflateInit_(z_streamp strm, const char *version,
+ int stream_size);
+PR_EXTERN(int)
+deflateInit2_(z_streamp strm, int level, int method,
+ int windowBits, int memLevel, int strategy,
+ const char *version, int stream_size);
+PR_EXTERN(int)
+inflateInit2_(z_streamp strm, int windowBits,
+ const char *version, int stream_size);
+#else
+extern int EXPORT deflateInit_ OF((z_streamp strm, int level, const char *version,
+ int stream_size));
+extern int EXPORT inflateInit_ OF((z_streamp strm, const char *version,
+ int stream_size));
+extern int EXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel, int strategy,
+ const char *version, int stream_size));
+extern int EXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+#endif /* MOZILLA_CLIENT */
+
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm), (level), (method), (windowBits), (memLevel), \
+ (strategy), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+struct internal_state {
+ int dummy;
+}; /* hack for buggy compilers */
+#endif
+
+uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ZLIB_H */