diff options
Diffstat (limited to 'third_party/aom/av1/common/x86/cfl_ssse3.c')
| -rw-r--r-- | third_party/aom/av1/common/x86/cfl_ssse3.c | 397 |
1 files changed, 397 insertions, 0 deletions
diff --git a/third_party/aom/av1/common/x86/cfl_ssse3.c b/third_party/aom/av1/common/x86/cfl_ssse3.c new file mode 100644 index 0000000000..476b6609a9 --- /dev/null +++ b/third_party/aom/av1/common/x86/cfl_ssse3.c @@ -0,0 +1,397 @@ +/* + * Copyright (c) 2017, Alliance for Open Media. All rights reserved + * + * This source code is subject to the terms of the BSD 2 Clause License and + * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License + * was not distributed with this source code in the LICENSE file, you can + * obtain it at www.aomedia.org/license/software. If the Alliance for Open + * Media Patent License 1.0 was not distributed with this source code in the + * PATENTS file, you can obtain it at www.aomedia.org/license/patent. + */ + +#include <tmmintrin.h> + +#include "config/av1_rtcd.h" + +#include "av1/common/cfl.h" + +#include "av1/common/x86/cfl_simd.h" + +// Load 32-bit integer from memory into the first element of dst. +static INLINE __m128i _mm_loadh_epi32(__m128i const *mem_addr) { + return _mm_cvtsi32_si128(*((int *)mem_addr)); +} + +// Store 32-bit integer from the first element of a into memory. +static INLINE void _mm_storeh_epi32(__m128i const *mem_addr, __m128i a) { + *((int *)mem_addr) = _mm_cvtsi128_si32(a); +} + +/** + * Adds 4 pixels (in a 2x2 grid) and multiplies them by 2. Resulting in a more + * precise version of a box filter 4:2:0 pixel subsampling in Q3. + * + * The CfL prediction buffer is always of size CFL_BUF_SQUARE. However, the + * active area is specified using width and height. + * + * Note: We don't need to worry about going over the active area, as long as we + * stay inside the CfL prediction buffer. + */ +static INLINE void cfl_luma_subsampling_420_lbd_ssse3(const uint8_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + const __m128i twos = _mm_set1_epi8(2); + __m128i *pred_buf_m128i = (__m128i *)pred_buf_q3; + const __m128i *end = pred_buf_m128i + (height >> 1) * CFL_BUF_LINE_I128; + const int luma_stride = input_stride << 1; + do { + if (width == 4) { + __m128i top = _mm_loadh_epi32((__m128i *)input); + top = _mm_maddubs_epi16(top, twos); + __m128i bot = _mm_loadh_epi32((__m128i *)(input + input_stride)); + bot = _mm_maddubs_epi16(bot, twos); + const __m128i sum = _mm_add_epi16(top, bot); + _mm_storeh_epi32(pred_buf_m128i, sum); + } else if (width == 8) { + __m128i top = _mm_loadl_epi64((__m128i *)input); + top = _mm_maddubs_epi16(top, twos); + __m128i bot = _mm_loadl_epi64((__m128i *)(input + input_stride)); + bot = _mm_maddubs_epi16(bot, twos); + const __m128i sum = _mm_add_epi16(top, bot); + _mm_storel_epi64(pred_buf_m128i, sum); + } else { + __m128i top = _mm_loadu_si128((__m128i *)input); + top = _mm_maddubs_epi16(top, twos); + __m128i bot = _mm_loadu_si128((__m128i *)(input + input_stride)); + bot = _mm_maddubs_epi16(bot, twos); + const __m128i sum = _mm_add_epi16(top, bot); + _mm_storeu_si128(pred_buf_m128i, sum); + if (width == 32) { + __m128i top_1 = _mm_loadu_si128(((__m128i *)input) + 1); + __m128i bot_1 = + _mm_loadu_si128(((__m128i *)(input + input_stride)) + 1); + top_1 = _mm_maddubs_epi16(top_1, twos); + bot_1 = _mm_maddubs_epi16(bot_1, twos); + __m128i sum_1 = _mm_add_epi16(top_1, bot_1); + _mm_storeu_si128(pred_buf_m128i + 1, sum_1); + } + } + input += luma_stride; + pred_buf_m128i += CFL_BUF_LINE_I128; + } while (pred_buf_m128i < end); +} + +/** + * Adds 2 pixels (in a 2x1 grid) and multiplies them by 4. Resulting in a more + * precise version of a box filter 4:2:2 pixel subsampling in Q3. + * + * The CfL prediction buffer is always of size CFL_BUF_SQUARE. However, the + * active area is specified using width and height. + * + * Note: We don't need to worry about going over the active area, as long as we + * stay inside the CfL prediction buffer. + */ +static INLINE void cfl_luma_subsampling_422_lbd_ssse3(const uint8_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + const __m128i fours = _mm_set1_epi8(4); + __m128i *pred_buf_m128i = (__m128i *)pred_buf_q3; + const __m128i *end = pred_buf_m128i + height * CFL_BUF_LINE_I128; + do { + if (width == 4) { + __m128i top = _mm_loadh_epi32((__m128i *)input); + top = _mm_maddubs_epi16(top, fours); + _mm_storeh_epi32(pred_buf_m128i, top); + } else if (width == 8) { + __m128i top = _mm_loadl_epi64((__m128i *)input); + top = _mm_maddubs_epi16(top, fours); + _mm_storel_epi64(pred_buf_m128i, top); + } else { + __m128i top = _mm_loadu_si128((__m128i *)input); + top = _mm_maddubs_epi16(top, fours); + _mm_storeu_si128(pred_buf_m128i, top); + if (width == 32) { + __m128i top_1 = _mm_loadu_si128(((__m128i *)input) + 1); + top_1 = _mm_maddubs_epi16(top_1, fours); + _mm_storeu_si128(pred_buf_m128i + 1, top_1); + } + } + input += input_stride; + pred_buf_m128i += CFL_BUF_LINE_I128; + } while (pred_buf_m128i < end); +} + +/** + * Multiplies the pixels by 8 (scaling in Q3). + * + * The CfL prediction buffer is always of size CFL_BUF_SQUARE. However, the + * active area is specified using width and height. + * + * Note: We don't need to worry about going over the active area, as long as we + * stay inside the CfL prediction buffer. + */ +static INLINE void cfl_luma_subsampling_444_lbd_ssse3(const uint8_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + const __m128i zeros = _mm_setzero_si128(); + const int luma_stride = input_stride; + __m128i *pred_buf_m128i = (__m128i *)pred_buf_q3; + const __m128i *end = pred_buf_m128i + height * CFL_BUF_LINE_I128; + do { + if (width == 4) { + __m128i row = _mm_loadh_epi32((__m128i *)input); + row = _mm_unpacklo_epi8(row, zeros); + _mm_storel_epi64(pred_buf_m128i, _mm_slli_epi16(row, 3)); + } else if (width == 8) { + __m128i row = _mm_loadl_epi64((__m128i *)input); + row = _mm_unpacklo_epi8(row, zeros); + _mm_storeu_si128(pred_buf_m128i, _mm_slli_epi16(row, 3)); + } else { + __m128i row = _mm_loadu_si128((__m128i *)input); + const __m128i row_lo = _mm_unpacklo_epi8(row, zeros); + const __m128i row_hi = _mm_unpackhi_epi8(row, zeros); + _mm_storeu_si128(pred_buf_m128i, _mm_slli_epi16(row_lo, 3)); + _mm_storeu_si128(pred_buf_m128i + 1, _mm_slli_epi16(row_hi, 3)); + if (width == 32) { + __m128i row_1 = _mm_loadu_si128(((__m128i *)input) + 1); + const __m128i row_1_lo = _mm_unpacklo_epi8(row_1, zeros); + const __m128i row_1_hi = _mm_unpackhi_epi8(row_1, zeros); + _mm_storeu_si128(pred_buf_m128i + 2, _mm_slli_epi16(row_1_lo, 3)); + _mm_storeu_si128(pred_buf_m128i + 3, _mm_slli_epi16(row_1_hi, 3)); + } + } + input += luma_stride; + pred_buf_m128i += CFL_BUF_LINE_I128; + } while (pred_buf_m128i < end); +} + +#if CONFIG_AV1_HIGHBITDEPTH +/** + * Adds 4 pixels (in a 2x2 grid) and multiplies them by 2. Resulting in a more + * precise version of a box filter 4:2:0 pixel subsampling in Q3. + * + * The CfL prediction buffer is always of size CFL_BUF_SQUARE. However, the + * active area is specified using width and height. + * + * Note: We don't need to worry about going over the active area, as long as we + * stay inside the CfL prediction buffer. + */ +static INLINE void cfl_luma_subsampling_420_hbd_ssse3(const uint16_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + const uint16_t *end = pred_buf_q3 + (height >> 1) * CFL_BUF_LINE; + const int luma_stride = input_stride << 1; + do { + if (width == 4) { + const __m128i top = _mm_loadl_epi64((__m128i *)input); + const __m128i bot = _mm_loadl_epi64((__m128i *)(input + input_stride)); + __m128i sum = _mm_add_epi16(top, bot); + sum = _mm_hadd_epi16(sum, sum); + *((int *)pred_buf_q3) = _mm_cvtsi128_si32(_mm_add_epi16(sum, sum)); + } else { + const __m128i top = _mm_loadu_si128((__m128i *)input); + const __m128i bot = _mm_loadu_si128((__m128i *)(input + input_stride)); + __m128i sum = _mm_add_epi16(top, bot); + if (width == 8) { + sum = _mm_hadd_epi16(sum, sum); + _mm_storel_epi64((__m128i *)pred_buf_q3, _mm_add_epi16(sum, sum)); + } else { + const __m128i top_1 = _mm_loadu_si128(((__m128i *)input) + 1); + const __m128i bot_1 = + _mm_loadu_si128(((__m128i *)(input + input_stride)) + 1); + sum = _mm_hadd_epi16(sum, _mm_add_epi16(top_1, bot_1)); + _mm_storeu_si128((__m128i *)pred_buf_q3, _mm_add_epi16(sum, sum)); + if (width == 32) { + const __m128i top_2 = _mm_loadu_si128(((__m128i *)input) + 2); + const __m128i bot_2 = + _mm_loadu_si128(((__m128i *)(input + input_stride)) + 2); + const __m128i top_3 = _mm_loadu_si128(((__m128i *)input) + 3); + const __m128i bot_3 = + _mm_loadu_si128(((__m128i *)(input + input_stride)) + 3); + const __m128i sum_2 = _mm_add_epi16(top_2, bot_2); + const __m128i sum_3 = _mm_add_epi16(top_3, bot_3); + __m128i next_sum = _mm_hadd_epi16(sum_2, sum_3); + _mm_storeu_si128(((__m128i *)pred_buf_q3) + 1, + _mm_add_epi16(next_sum, next_sum)); + } + } + } + input += luma_stride; + } while ((pred_buf_q3 += CFL_BUF_LINE) < end); +} + +/** + * Adds 2 pixels (in a 2x1 grid) and multiplies them by 4. Resulting in a more + * precise version of a box filter 4:2:2 pixel subsampling in Q3. + * + * The CfL prediction buffer is always of size CFL_BUF_SQUARE. However, the + * active area is specified using width and height. + * + * Note: We don't need to worry about going over the active area, as long as we + * stay inside the CfL prediction buffer. + */ +static INLINE void cfl_luma_subsampling_422_hbd_ssse3(const uint16_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + __m128i *pred_buf_m128i = (__m128i *)pred_buf_q3; + const __m128i *end = pred_buf_m128i + height * CFL_BUF_LINE_I128; + do { + if (width == 4) { + const __m128i top = _mm_loadl_epi64((__m128i *)input); + const __m128i sum = _mm_slli_epi16(_mm_hadd_epi16(top, top), 2); + _mm_storeh_epi32(pred_buf_m128i, sum); + } else { + const __m128i top = _mm_loadu_si128((__m128i *)input); + if (width == 8) { + const __m128i sum = _mm_slli_epi16(_mm_hadd_epi16(top, top), 2); + _mm_storel_epi64(pred_buf_m128i, sum); + } else { + const __m128i top_1 = _mm_loadu_si128(((__m128i *)input) + 1); + const __m128i sum = _mm_slli_epi16(_mm_hadd_epi16(top, top_1), 2); + _mm_storeu_si128(pred_buf_m128i, sum); + if (width == 32) { + const __m128i top_2 = _mm_loadu_si128(((__m128i *)input) + 2); + const __m128i top_3 = _mm_loadu_si128(((__m128i *)input) + 3); + const __m128i sum_1 = _mm_slli_epi16(_mm_hadd_epi16(top_2, top_3), 2); + _mm_storeu_si128(pred_buf_m128i + 1, sum_1); + } + } + } + pred_buf_m128i += CFL_BUF_LINE_I128; + input += input_stride; + } while (pred_buf_m128i < end); +} + +static INLINE void cfl_luma_subsampling_444_hbd_ssse3(const uint16_t *input, + int input_stride, + uint16_t *pred_buf_q3, + int width, int height) { + const uint16_t *end = pred_buf_q3 + height * CFL_BUF_LINE; + do { + if (width == 4) { + const __m128i row = _mm_slli_epi16(_mm_loadl_epi64((__m128i *)input), 3); + _mm_storel_epi64((__m128i *)pred_buf_q3, row); + } else { + const __m128i row = _mm_slli_epi16(_mm_loadu_si128((__m128i *)input), 3); + _mm_storeu_si128((__m128i *)pred_buf_q3, row); + if (width >= 16) { + __m128i row_1 = _mm_loadu_si128(((__m128i *)input) + 1); + row_1 = _mm_slli_epi16(row_1, 3); + _mm_storeu_si128(((__m128i *)pred_buf_q3) + 1, row_1); + if (width == 32) { + __m128i row_2 = _mm_loadu_si128(((__m128i *)input) + 2); + row_2 = _mm_slli_epi16(row_2, 3); + _mm_storeu_si128(((__m128i *)pred_buf_q3) + 2, row_2); + __m128i row_3 = _mm_loadu_si128(((__m128i *)input) + 3); + row_3 = _mm_slli_epi16(row_3, 3); + _mm_storeu_si128(((__m128i *)pred_buf_q3) + 3, row_3); + } + } + } + input += input_stride; + pred_buf_q3 += CFL_BUF_LINE; + } while (pred_buf_q3 < end); +} +#endif // CONFIG_AV1_HIGHBITDEPTH + +CFL_GET_SUBSAMPLE_FUNCTION(ssse3) + +static INLINE __m128i predict_unclipped(const __m128i *input, __m128i alpha_q12, + __m128i alpha_sign, __m128i dc_q0) { + __m128i ac_q3 = _mm_loadu_si128(input); + __m128i ac_sign = _mm_sign_epi16(alpha_sign, ac_q3); + __m128i scaled_luma_q0 = _mm_mulhrs_epi16(_mm_abs_epi16(ac_q3), alpha_q12); + scaled_luma_q0 = _mm_sign_epi16(scaled_luma_q0, ac_sign); + return _mm_add_epi16(scaled_luma_q0, dc_q0); +} + +static INLINE void cfl_predict_lbd_ssse3(const int16_t *pred_buf_q3, + uint8_t *dst, int dst_stride, + int alpha_q3, int width, int height) { + const __m128i alpha_sign = _mm_set1_epi16(alpha_q3); + const __m128i alpha_q12 = _mm_slli_epi16(_mm_abs_epi16(alpha_sign), 9); + const __m128i dc_q0 = _mm_set1_epi16(*dst); + __m128i *row = (__m128i *)pred_buf_q3; + const __m128i *row_end = row + height * CFL_BUF_LINE_I128; + do { + __m128i res = predict_unclipped(row, alpha_q12, alpha_sign, dc_q0); + if (width < 16) { + res = _mm_packus_epi16(res, res); + if (width == 4) + _mm_storeh_epi32((__m128i *)dst, res); + else + _mm_storel_epi64((__m128i *)dst, res); + } else { + __m128i next = predict_unclipped(row + 1, alpha_q12, alpha_sign, dc_q0); + res = _mm_packus_epi16(res, next); + _mm_storeu_si128((__m128i *)dst, res); + if (width == 32) { + res = predict_unclipped(row + 2, alpha_q12, alpha_sign, dc_q0); + next = predict_unclipped(row + 3, alpha_q12, alpha_sign, dc_q0); + res = _mm_packus_epi16(res, next); + _mm_storeu_si128((__m128i *)(dst + 16), res); + } + } + dst += dst_stride; + } while ((row += CFL_BUF_LINE_I128) < row_end); +} + +CFL_PREDICT_FN(ssse3, lbd) + +#if CONFIG_AV1_HIGHBITDEPTH +static INLINE __m128i highbd_max_epi16(int bd) { + const __m128i neg_one = _mm_set1_epi16(-1); + // (1 << bd) - 1 => -(-1 << bd) -1 => -1 - (-1 << bd) => -1 ^ (-1 << bd) + return _mm_xor_si128(_mm_slli_epi16(neg_one, bd), neg_one); +} + +static INLINE __m128i highbd_clamp_epi16(__m128i u, __m128i zero, __m128i max) { + return _mm_max_epi16(_mm_min_epi16(u, max), zero); +} + +static INLINE void cfl_predict_hbd_ssse3(const int16_t *pred_buf_q3, + uint16_t *dst, int dst_stride, + int alpha_q3, int bd, int width, + int height) { + const __m128i alpha_sign = _mm_set1_epi16(alpha_q3); + const __m128i alpha_q12 = _mm_slli_epi16(_mm_abs_epi16(alpha_sign), 9); + const __m128i dc_q0 = _mm_set1_epi16(*dst); + const __m128i max = highbd_max_epi16(bd); + const __m128i zeros = _mm_setzero_si128(); + __m128i *row = (__m128i *)pred_buf_q3; + const __m128i *row_end = row + height * CFL_BUF_LINE_I128; + do { + __m128i res = predict_unclipped(row, alpha_q12, alpha_sign, dc_q0); + res = highbd_clamp_epi16(res, zeros, max); + if (width == 4) { + _mm_storel_epi64((__m128i *)dst, res); + } else { + _mm_storeu_si128((__m128i *)dst, res); + } + if (width >= 16) { + const __m128i res_1 = + predict_unclipped(row + 1, alpha_q12, alpha_sign, dc_q0); + _mm_storeu_si128(((__m128i *)dst) + 1, + highbd_clamp_epi16(res_1, zeros, max)); + } + if (width == 32) { + const __m128i res_2 = + predict_unclipped(row + 2, alpha_q12, alpha_sign, dc_q0); + _mm_storeu_si128((__m128i *)(dst + 16), + highbd_clamp_epi16(res_2, zeros, max)); + const __m128i res_3 = + predict_unclipped(row + 3, alpha_q12, alpha_sign, dc_q0); + _mm_storeu_si128((__m128i *)(dst + 24), + highbd_clamp_epi16(res_3, zeros, max)); + } + dst += dst_stride; + } while ((row += CFL_BUF_LINE_I128) < row_end); +} + +CFL_PREDICT_FN(ssse3, hbd) +#endif // CONFIG_AV1_HIGHBITDEPTH |