summaryrefslogtreecommitdiffstats
path: root/isci/create_fw.h
diff options
context:
space:
mode:
Diffstat (limited to 'isci/create_fw.h')
-rw-r--r--isci/create_fw.h86
1 files changed, 86 insertions, 0 deletions
diff --git a/isci/create_fw.h b/isci/create_fw.h
new file mode 100644
index 0000000..f9b04ba
--- /dev/null
+++ b/isci/create_fw.h
@@ -0,0 +1,86 @@
+#ifndef _CREATE_FW_H_
+#define _CREATE_FW_H_
+#include "probe_roms.h"
+
+
+/* we are configuring for 2 SCUs */
+static const int num_elements = 2;
+
+/*
+ * For all defined arrays:
+ * elements 0-3 are for SCU0, ports 0-3
+ * elements 4-7 are for SCU1, ports 0-3
+ *
+ * valid configurations for one SCU are:
+ * P0 P1 P2 P3
+ * ----------------
+ * 0xF,0x0,0x0,0x0 # 1 x4 port
+ * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
+ * # ports
+ * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
+ * # port
+ * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
+ * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
+ *
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value assigned to UNINIT_PARAM (255).
+ */
+
+/* discovery mode type (port auto config mode by default ) */
+
+/*
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value "0000000000000000". SAS address of zero's is
+ * considered invalid and will not be used.
+ */
+#ifdef MPC
+static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
+static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
+ {1, 2, 4, 8} };
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
+ 0x5FCFFFFFF0000002ULL,
+ 0x5FCFFFFFF0000003ULL,
+ 0x5FCFFFFFF0000004ULL },
+ { 0x5FCFFFFFF0000005ULL,
+ 0x5FCFFFFFF0000006ULL,
+ 0x5FCFFFFFF0000007ULL,
+ 0x5FCFFFFFF0000008ULL } };
+#else /* APC (default) */
+static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+static const __u8 phy_mask[2][4];
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL },
+ { 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL } };
+#endif
+
+static const int cable_selection[2][4];
+
+/* Maximum number of concurrent device spin up */
+static const int max_num_concurrent_dev_spin_up = 1;
+
+/* enable of ssc operation */
+/*
+ * NOTE: also see probe_roms.h. This value can be set for ssc values.
+ * Values can be set for:
+ * ssc_sata_tx_spread_level
+ * ssc_sas_tx_spread_level
+ * ssc_sas_tx_type
+ */
+static const __u8 enable_ssc;
+
+/* AFE_TX_AMP_CONTROL */
+static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
+static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
+static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
+static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
+
+static const char blob_name[] = "isci_firmware.bin";
+static const char sig[] = "ISCUOEMB";
+static const unsigned char version = ISCI_ROM_VER_LATEST;
+
+#endif