summaryrefslogtreecommitdiffstats
path: root/raddb/mods-config/sql/main/mssql/queries.conf
diff options
context:
space:
mode:
Diffstat (limited to 'raddb/mods-config/sql/main/mssql/queries.conf')
-rw-r--r--raddb/mods-config/sql/main/mssql/queries.conf617
1 files changed, 617 insertions, 0 deletions
diff --git a/raddb/mods-config/sql/main/mssql/queries.conf b/raddb/mods-config/sql/main/mssql/queries.conf
new file mode 100644
index 0000000..1978463
--- /dev/null
+++ b/raddb/mods-config/sql/main/mssql/queries.conf
@@ -0,0 +1,617 @@
+# -*- text -*-
+#
+# main/mssql/queries.conf -- MSSQL configuration for default schema (schema.sql)
+#
+# $Id$
+
+# Safe characters list for sql queries. Everything else is replaced
+# with their mime-encoded equivalents.
+# The default list should be ok
+#safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
+
+#######################################################################
+# Query config: Username
+#######################################################################
+# This is the username that will get substituted, escaped, and added
+# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used
+# below everywhere a username substitution is needed so you you can
+# be sure the username passed from the client is escaped properly.
+#
+# Uncomment the next line, if you want the sql_user_name to mean:
+#
+# Use Stripped-User-Name, if it's there.
+# Else use User-Name, if it's there,
+# Else use hard-coded string "none" as the user name.
+#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-none}}"
+#
+sql_user_name = "%{User-Name}"
+
+#######################################################################
+# Query config: Event-Timestamp
+#######################################################################
+# event_timestamp_epoch is the basis for the time inserted into
+# accounting records. Typically this will be the Event-Timestamp of the
+# accounting request, which is usually provided by a NAS.
+#
+# Uncomment the next line, if you want the timestamp to be based on the
+# request reception time recorded by this server, for example if you
+# distrust the provided Event-Timestamp.
+#event_timestamp_epoch = "%l"
+
+event_timestamp_epoch = "%{%{integer:Event-Timestamp}:-%l}"
+
+# event_timestamp is the SQL snippet for converting an epoch timestamp
+# to an SQL date.
+
+event_timestamp = "DATEADD(SS, ${event_timestamp_epoch}, '19700101')"
+
+#######################################################################
+# Query config: Class attribute
+#######################################################################
+#
+# 3.0.22 and later have a "class" column in the accounting table.
+#
+# However, we do NOT want to break existing configurations by adding
+# the Class attribute to the default queries. If we did that, then
+# systems using newer versions of the server would fail, because
+# there is no "class" column in their accounting tables.
+#
+# The solution to that is the following "class" subsection. If your
+# database has a "class" column for the various tables, then you can
+# uncomment the configuration items here. The queries below will
+# then automatically insert the Class attribute into radacct,
+# radpostauth, etc.
+#
+class {
+ #
+ # Delete the '#' character from each of the configuration
+ # items in this section. This change puts the Class
+ # attribute into the various tables. Leave the double-quoted
+ # string there, as the value for the configuration item.
+ #
+ # See also policy.d/accounting, and the "insert_acct_class"
+ # policy. You will need to list (or uncomment)
+ # "insert_acct_class" in the "post-auth" section in order to
+ # create a Class attribute.
+ #
+ column_name = # ", class"
+ packet_xlat = # ", '%{Class}'"
+ reply_xlat = # ", '%{reply:Class}'"
+}
+
+#######################################################################
+# Authorization Queries
+#######################################################################
+# These queries compare the check items for the user
+# in ${authcheck_table} and setup the reply items in
+# ${authreply_table}. You can use any query/tables
+# you want, but the return data for each row MUST
+# be in the following order:
+#
+# 0. Row ID (currently unused)
+# 1. UserName/GroupName
+# 2. Item Attr Name
+# 3. Item Attr Value
+# 4. Item Attr Operation
+#######################################################################
+# Query for case sensitive usernames was removed. Please contact with me,
+# if you know analog of STRCMP functions for MS SQL.
+
+authorize_check_query = "\
+ SELECT id, UserName, Attribute, Value, op \
+ FROM ${authcheck_table} \
+ WHERE Username = '%{SQL-User-Name}' \
+ ORDER BY id"
+
+authorize_reply_query = "\
+ SELECT id, UserName, Attribute, Value, op \
+ FROM ${authreply_table} \
+ WHERE Username = '%{SQL-User-Name}' \
+ ORDER BY id"
+
+authorize_group_check_query = "\
+ SELECT \
+ ${groupcheck_table}.id,${groupcheck_table}.GroupName, \
+ ${groupcheck_table}.Attribute,${groupcheck_table}.Value, \
+ ${groupcheck_table}.op \
+ FROM ${groupcheck_table},${usergroup_table} \
+ WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
+ AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName \
+ ORDER BY ${groupcheck_table}.id"
+
+authorize_group_reply_query = "\
+ SELECT \
+ ${groupreply_table}.id, ${groupreply_table}.GroupName, \
+ ${groupreply_table}.Attribute,${groupreply_table}.Value, \
+ ${groupreply_table}.op \
+ FROM ${groupreply_table},${usergroup_table} \
+ WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
+ AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName \
+ ORDER BY ${groupreply_table}.id"
+
+group_membership_query = "\
+ SELECT groupname \
+ FROM ${usergroup_table} \
+ WHERE username = '%{SQL-User-Name}' \
+ ORDER BY priority"
+
+#######################################################################
+# Simultaneous Use Checking Queries
+#######################################################################
+# simul_count_query - query for the number of current connections
+# - If this is not defined, no simultaneous use checking
+# - will be performed by this module instance
+# simul_verify_query - query to return details of current connections
+# for verification
+# - Leave blank or commented out to disable verification step
+# - Note that the returned field order should not be changed.
+#######################################################################
+
+simul_count_query = "\
+ SELECT COUNT(*) \
+ FROM ${acct_table1} \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND AcctStopTime = 0"
+
+simul_verify_query = "\
+ SELECT \
+ RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, \
+ CallingStationId, FramedProtocol \
+ FROM ${acct_table1} \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND AcctStopTime = 0"
+
+#######################################################################
+# Accounting and Post-Auth Queries
+#######################################################################
+# These queries insert/update accounting and authentication records.
+# The query to use is determined by the value of 'reference'.
+# This value is used as a configuration path and should resolve to one
+# or more 'query's. If reference points to multiple queries, and a query
+# fails, the next query is executed.
+#
+# Behaviour is identical to the old 1.x/2.x module, except we can now
+# fail between N queries, and query selection can be based on any
+# combination of attributes, or custom 'Acct-Status-Type' values.
+#######################################################################
+accounting {
+ reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
+
+ # Write SQL queries to a logfile. This is potentially useful for bulk inserts
+ # when used with the rlm_sql_null driver.
+# logfile = ${logdir}/accounting.sql
+
+ type {
+ accounting-on {
+ query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctStopTime=${....event_timestamp}, \
+ AcctSessionTime=${....event_timestamp_epoch} - \
+ DATEDIFF(SS, '1970-01-01', AcctStartTime), \
+ AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', \
+ AcctStopDelay = %{%{Acct-Delay-Time}:-0} \
+ WHERE AcctStopTime = 0 \
+ AND NASIPAddress = '%{NAS-IP-Address}' \
+ AND AcctStartTime <= ${....event_timestamp}"
+ }
+
+ accounting-off {
+ query = "${..accounting-on.query}"
+ }
+
+ #
+ # Implement the "sql_session_start" policy.
+ # See raddb/policy.d/accounting for more details.
+ #
+ # You also need to fix the other queries as
+ # documented below. Look for "sql_session_start".
+ #
+ post-auth {
+ query = "\
+ INSERT INTO ${....acct_table1} \
+ INSERT INTO ${....acct_table1} ( \
+ AcctSessionId, \
+ AcctUniqueId, \
+ UserName, \
+ Realm, \
+ NASIPAddress, \
+ NASPortId, \
+ NASPortType, \
+ AcctStartTime, \
+ AcctSessionTime, \
+ AcctUpdateTime, \
+ AcctAuthentic, \
+ ConnectInfo_start, \
+ ConnectInfo_stop, \
+ AcctInputOctets, \
+ AcctOutputOctets, \
+ CalledStationId, \
+ CallingStationId, \
+ AcctTerminateCause, \
+ ServiceType, \
+ FramedProtocol, \
+ FramedIPAddress, \
+ FramedIPv6Address, \
+ FramedIPv6Prefix, \
+ FramedInterfaceId, \
+ DelegatedIPv6Prefix \
+ ${....class.column_name}) \
+ VALUES(\
+ '%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', \
+ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \
+ '%{NAS-Port-Type}', \
+ ${....event_timestamp}, \
+ ${....event_timestamp}, \
+ 0, \
+ '', \
+ '%{Connect-Info}', \
+ '', \
+ 0, \
+ 0, \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '', \
+ '%{Service-Type}', \
+ '', \
+ '', \
+ '', \
+ '', \
+ '', \
+ '' \
+ ${....class.packet_xlat})"
+
+ query = "\
+ UPDATE ${....acct_table1} SET \
+ AcctStartTime = '%S', \
+ ConnectInfo_start = '%{Connect-Info}', \
+ AcctSessionId = '%{Acct-Session-Id}' \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
+ AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
+ AND NASPortType = '%{NAS-Port-Type}' \
+ AND AcctStopTime = 0"
+ }
+
+ start {
+ query = "\
+ INSERT INTO ${....acct_table1} ( \
+ AcctSessionId, \
+ AcctUniqueId, \
+ UserName, \
+ Realm, \
+ NASIPAddress, \
+ NASPortId, \
+ NASPortType, \
+ AcctStartTime, \
+ AcctUpdateTime, \
+ AcctSessionTime, \
+ AcctAuthentic, \
+ ConnectInfo_start, \
+ ConnectInfo_stop, \
+ AcctInputOctets, \
+ AcctOutputOctets, \
+ CalledStationId, \
+ CallingStationId, \
+ AcctTerminateCause, \
+ ServiceType, \
+ FramedProtocol, \
+ FramedIPAddress, \
+ FramedIPv6Address, \
+ FramedIPv6Prefix, \
+ FramedInterfaceId, \
+ DelegatedIPv6Prefix, \
+ AcctStartDelay, \
+ AcctStopDelay \
+ ${....class.column_name}) \
+ VALUES(\
+ '%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \
+ '%{NAS-Port-Type}', \
+ ${....event_timestamp}, \
+ ${....event_timestamp}, \
+ '0', \
+ '%{Acct-Authentic}', \
+ '%{Connect-Info}', \
+ '', \
+ '0', \
+ '0', \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}', \
+ '%{Framed-IPv6-Address}', \
+ '%{Framed-IPv6-Prefix}', \
+ '%{Framed-Interface-Id}', \
+ '%{Delegated-IPv6-Prefix}', \
+ '%{Acct-Delay-Time}', \
+ '0' \
+ ${....class.packet_xlat})"
+
+ #
+ # When using "sql_session_start", you should comment out
+ # the previous query, and enable this one.
+ #
+ # Just change the previous query to "-query",
+ # and this one to "query". The previous one
+ # will be ignored, and this one will be
+ # enabled.
+ #
+ -query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctSessionId = '%{Acct-Session-Id}', \
+ AcctUniqueId = '%{Acct-Unique-Session-Id}', \
+ AcctAuthentic = '%{Acct-Authentic}', \
+ ConnectInfo_start = '%{Connect-Info}', \
+ ServiceType = '%{Service-Type}', \
+ FramedProtocol = '%{Framed-Protocol}', \
+ FramedIpAddress = '%{Framed-IP-Address}', \
+ FramedIpv6Address = '%{Framed-IPv6-Address}', \
+ FramedIpv6Prefix = '%{Framed-IPv6-Prefix}', \
+ FramedInterfaceId = '%{Framed-Interface-Id}', \
+ DelegatedIpv6Prefix = '%{Delegated-IPv6-Prefix}', \
+ AcctStartTime = ${....event_timestamp}, \
+ AcctUpdateTime = ${....event_timestamp} \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
+ AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
+ AND NASPortType = '%{NAS-Port-Type}' \
+ AND AcctStopTime = 0"
+
+ query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctStartTime = ${....event_timestamp}, \
+ AcctUpdateTime = ${....event_timestamp }, \
+ AcctStartDelay = '%{%{Acct-Delay-Time}:-0}', \
+ ConnectInfo_start = '%{Connect-Info}' \
+ WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
+ AND AcctStopTime = 0"
+ }
+
+ interim-update {
+ query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctInterval = DATEDIFF(second, CASE WHEN AcctUpdateTime > 0 THEN AcctUpdateTime ELSE AcctStartTime END, ${....event_timestamp}), \
+ AcctUpdateTime = ${....event_timestamp}, \
+ AcctSessionTime = '%{Acct-Session-Time}', \
+ AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
+ AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
+ FramedIPAddress = '%{Framed-IP-Address}', \
+ FramedIPv6Address = '%{Framed-IPv6-Address}', \
+ FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
+ FramedInterfaceId = '%{Framed-Interface-Id}', \
+ DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}' \
+ WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
+ AND AcctStopTime = 0"
+
+ query = "\
+ INSERT INTO ${....acct_table1} ( \
+ AcctSessionId, \
+ AcctUniqueId, \
+ UserName, \
+ Realm, \
+ NASIPAddress, \
+ NASPortId, \
+ NASPortType, \
+ AcctStartTime, \
+ AcctUpdateTime, \
+ AcctSessionTime, \
+ AcctAuthentic, \
+ ConnectInfo_start, \
+ AcctInputOctets, \
+ AcctOutputOctets, \
+ CalledStationId, \
+ CallingStationId, \
+ ServiceType, \
+ FramedProtocol, \
+ FramedIPAddress, \
+ FramedIPv6Address, \
+ FramedIPv6Prefix, \
+ FramedInterfaceId, \
+ DelegatedIPv6Prefix, \
+ AcctStartDelay \
+ ${....class.column_name}) \
+ VALUES(\
+ '%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \
+ '%{NAS-Port-Type}', \
+ ${....event_timestamp}, \
+ ${....event_timestamp}, \
+ '%{Acct-Session-Time}', \
+ '%{Acct-Authentic}', \
+ '', \
+ '%{Acct-Input-Octets}', \
+ '%{Acct-Output-Octets}', \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}', \
+ '%{Framed-IPv6-Address}', \
+ '%{Framed-IPv6-Prefix}', \
+ '%{Framed-Interface-Id}', \
+ '%{Delegated-IPv6-Prefix}', \
+ '0' \
+ ${....class.packet_xlat})"
+
+ #
+ # When using "sql_session_start", you should comment out
+ # the previous query, and enable this one.
+ #
+ # Just change the previous query to "-query",
+ # and this one to "query". The previous one
+ # will be ignored, and this one will be
+ # enabled.
+ #
+ -query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctSessionId = '%{Acct-Session-Id}', \
+ AcctUniqueId = '%{Acct-Unique-Session-Id}', \
+ AcctAuthentic = '%{Acct-Authentic}', \
+ ConnectInfo_start = '%{Connect-Info}', \
+ ServiceType = '%{Service-Type}', \
+ FramedProtocol = '%{Framed-Protocol}', \
+ FramedIPAddress = '%{Framed-IP-Address}', \
+ FramedIPv6Address = '%{Framed-IPv6-Address}', \
+ FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
+ FramedInterfaceId = '%{Framed-Interface-Id}', \
+ DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}', \
+ AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
+ AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}' \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
+ AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
+ AND NASPortType = '%{NAS-Port-Type}' \
+ AND AcctStopTime = 0"
+ }
+
+ stop {
+ query = "\
+ UPDATE ${....acct_table2} \
+ SET \
+ AcctStopTime = ${....event_timestamp}, \
+ AcctSessionTime = '%{Acct-Session-Time}', \
+ AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
+ AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
+ AcctTerminateCause = '%{Acct-Terminate-Cause}', \
+ AcctStopDelay = '%{%{Acct-Delay-Time}:-0}', \
+ ConnectInfo_stop = '%{Connect-Info}' \
+ WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' \
+ AND AcctStopTime = 0"
+
+ query = "\
+ INSERT into ${....acct_table2} (\
+ AcctSessionId, \
+ AcctUniqueId, \
+ UserName, \
+ Realm, \
+ NASIPAddress, \
+ NASPortID, \
+ NASPortType, \
+ AcctStopTime, \
+ AcctSessionTime, \
+ AcctAuthentic, \
+ ConnectInfo_start, \
+ ConnectInfo_stop, \
+ AcctInputOctets, \
+ AcctOutputOctets, \
+ CalledStationId, \
+ CallingStationId, \
+ AcctTerminateCause, \
+ ServiceType, \
+ FramedProtocol, \
+ FramedIPAddress, \
+ FramedIPv6Address, \
+ FramedIPv6Prefix, \
+ FramedInterfaceId, \
+ DelegatedIPv6Prefix, \
+ AcctStartDelay, \
+ AcctStopDelay \
+ ${....class.column_name}) \
+ VALUES(\
+ '%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \
+ '%{NAS-Port-Type}', \
+ ${....event_timestamp}, \
+ '%{Acct-Session-Time}', \
+ '%{Acct-Authentic}', \
+ '', \
+ '%{Connect-Info}', \
+ convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
+ convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '%{Acct-Terminate-Cause}', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}', \
+ '%{Framed-IPv6-Address}', \
+ '%{Framed-IPv6-Prefix}', \
+ '%{Framed-Interface-Id}', \
+ '%{Delegated-IPv6-Prefix}', \
+ '0', \
+ '%{%{Acct-Delay-Time}:-0}' \
+ ${....class.packet_xlat})"
+
+ #
+ # When using "sql_session_start", you should comment out
+ # the previous query, and enable this one.
+ #
+ # Just change the previous query to "-query",
+ # and this one to "query". The previous one
+ # will be ignored, and this one will be
+ # enabled.
+ #
+ -query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ AcctSessionId = '%{Acct-Session-Id}', \
+ AcctUniqueId = '%{Acct-Unique-Session-Id}', \
+ AcctAuthentic = '%{Acct-Authentic}', \
+ ConnectInfo_start = '%{Connect-Info}', \
+ ServiceType = '%{Service-Type}', \
+ FramedProtocol = '%{Framed-Protocol}', \
+ FramedIPAddress = '%{Framed-IP-Address}', \
+ FramedIPv6Address = '%{Framed-IPv6-Address}', \
+ FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', \
+ FramedInterfaceId = '%{Framed-Interface-Id}', \
+ DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}', \
+ AcctStopTime = '%S', \
+ AcctSessionTime = %{Acct-Session-Time}, \
+ AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', \
+ AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', \
+ AcctTerminateCause = '%{Acct-Terminate-Cause}', \
+ ConnectInfo_stop = '%{Connect-Info}' \
+ WHERE UserName = '%{SQL-User-Name}' \
+ AND NASIPAddress = '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' \
+ AND NASPortId = '%{%{NAS-Port-ID}:-%{NAS-Port}}' \
+ AND NASPortType = '%{NAS-Port-Type}' \
+ AND AcctStopTime = 0"
+ }
+
+ #
+ # No Acct-Status-Type == ignore the packet
+ #
+ accounting {
+ query = "SELECT true"
+ }
+ }
+}
+
+post-auth {
+ # Write SQL queries to a logfile. This is potentially useful for bulk inserts
+ # when used with the rlm_sql_null driver.
+# logfile = ${logdir}/post-auth.sql
+
+ query = "\
+ INSERT INTO ${..postauth_table} \
+ (userName, pass, reply, authdate ${..class.column_name}) \
+ VALUES(\
+ '%{User-Name}', \
+ '%{%{User-Password}:-CHAP-PASSWORD}', \
+ '%{reply:Packet-Type}', \
+ '%S.%{expr:%M / 1000}' \
+ ${..class.reply_xlat})"
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-21 20:18:39 +0000