Adding upstream version 9.1.upstream/9.1

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 486 insertions, 0 deletions

diff --git a/tools/etc/frr/daemons b/tools/etc/frr/daemons
new file mode 100644
index 0000000..c487e7e
--- /dev/null
+++ b/tools/etc/frr/daemons
@@ -0,0 +1,126 @@
+# This file tells the frr package which daemons to start.
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/frr/examples/.
+#
+# ATTENTION:
+#
+# When activating a daemon for the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "frr", else
+# the daemon will not be started by /etc/init.d/frr. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
+#
+# The watchfrr, zebra and staticd daemons are always started.
+#
+bgpd=no
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+pimd=no
+pim6d=no
+ldpd=no
+nhrpd=no
+eigrpd=no
+babeld=no
+sharpd=no
+pbrd=no
+bfdd=no
+fabricd=no
+vrrpd=no
+pathd=no
+
+#
+# If this option is set the /etc/init.d/frr script automatically loads
+# the config via "vtysh -b" when the servers are started.
+# Check /etc/pam.d/frr if you intend to use "vtysh"!
+#
+vtysh_enable=yes
+zebra_options="  -A 127.0.0.1 -s 90000000"
+mgmtd_options="  -A 127.0.0.1"
+bgpd_options="   -A 127.0.0.1"
+ospfd_options="  -A 127.0.0.1"
+ospf6d_options=" -A ::1"
+ripd_options="   -A 127.0.0.1"
+ripngd_options=" -A ::1"
+isisd_options="  -A 127.0.0.1"
+pimd_options="   -A 127.0.0.1"
+pim6d_options="  -A ::1"
+ldpd_options="   -A 127.0.0.1"
+nhrpd_options="  -A 127.0.0.1"
+eigrpd_options=" -A 127.0.0.1"
+babeld_options=" -A 127.0.0.1"
+sharpd_options=" -A 127.0.0.1"
+pbrd_options="   -A 127.0.0.1"
+staticd_options="-A 127.0.0.1"
+bfdd_options="   -A 127.0.0.1"
+fabricd_options="-A 127.0.0.1"
+vrrpd_options="  -A 127.0.0.1"
+pathd_options="  -A 127.0.0.1"
+
+
+# If you want to pass a common option to all daemons, you can use the
+# "frr_global_options" variable.
+#
+#frr_global_options=""
+
+
+# The list of daemons to watch is automatically generated by the init script.
+# This variable can be used to pass options to watchfrr that will be passed
+# prior to the daemon list.
+#
+# To make watchfrr create/join the specified netns, add the the "--netns"
+# option here. It will only have an effect in /etc/frr/<somename>/daemons, and
+# you need to start FRR with "/usr/lib/frr/frrinit.sh start <somename>".
+#
+#watchfrr_options=""
+
+
+# configuration profile
+#
+#frr_profile="traditional"
+#frr_profile="datacenter"
+
+
+# This is the maximum number of FD's that will be available.  Upon startup this
+# is read by the control files and ulimit is called.  Uncomment and use a
+# reasonable value for your setup if you are expecting a large number of peers
+# in say BGP.
+#
+#MAX_FDS=1024
+
+# Uncomment this option if you want to run FRR as a non-root user. Note that
+# you should know what you are doing since most of the daemons need root
+# to work. This could be useful if you want to run FRR in a container
+# for instance.
+# FRR_NO_ROOT="yes"
+
+# For any daemon, you can specify a "wrap" command to start instead of starting
+# the daemon directly. This will simply be prepended to the daemon invocation.
+# These variables have the form daemon_wrap, where 'daemon' is the name of the
+# daemon (the same pattern as the daemon_options variables).
+#
+# Note that when daemons are started, they are told to daemonize with the `-d`
+# option. This has several implications. For one, the init script expects that
+# when it invokes a daemon, the invocation returns immediately. If you add a
+# wrap command here, it must comply with this expectation and daemonize as
+# well, or the init script will never return. Furthermore, because daemons are
+# themselves daemonized with -d, you must ensure that your wrapper command is
+# capable of following child processes after a fork() if you need it to do so.
+#
+# If your desired wrapper does not support daemonization, you can wrap it with
+# a utility program that daemonizes programs, such as 'daemonize'. An example
+# of this might look like:
+#
+# bgpd_wrap="/usr/bin/daemonize /usr/bin/mywrapper"
+#
+# This is particularly useful for programs which record processes but lack
+# daemonization options, such as perf and rr.
+#
+# If you wish to wrap all daemons in the same way, you may set the "all_wrap"
+# variable.
+#
+#all_wrap=""
diff --git a/tools/etc/frr/daemons.conf b/tools/etc/frr/daemons.conf
new file mode 100644
index 0000000..70b96a9
--- /dev/null
+++ b/tools/etc/frr/daemons.conf
@@ -0,0 +1 @@
+# this file is deprecated, please use "daemons" instead.
diff --git a/tools/etc/frr/frr.conf b/tools/etc/frr/frr.conf
new file mode 100644
index 0000000..5ee6d15
--- /dev/null
+++ b/tools/etc/frr/frr.conf
@@ -0,0 +1,10 @@
+# default to using syslog. /etc/rsyslog.d/45-frr.conf places the log in
+# /var/log/frr/frr.log
+#
+# Note:
+# FRR's configuration shell, vtysh, dynamically edits the live, in-memory
+# configuration while FRR is running. When instructed, vtysh will persist the
+# live configuration to this file, overwriting its contents. If you want to
+# avoid this, you can edit this file manually before starting FRR, or instruct
+# vtysh to write configuration to a different file.
+log syslog informational
diff --git a/tools/etc/frr/support_bundle_commands.conf b/tools/etc/frr/support_bundle_commands.conf
new file mode 100644
index 0000000..b7a1708
--- /dev/null
+++ b/tools/etc/frr/support_bundle_commands.conf
@@ -0,0 +1,259 @@
+# FRR Support Bundle Command List
+# Do Not modify the lines that start with
+# PROC_NAME, CMD_LIST_START and CMD_LIST_END
+# Add the new command for each process between
+# CMD_LIST_START and CMD_LIST_END lines
+
+# BGP Support Bundle Command List
+PROC_NAME:bgp
+CMD_LIST_START
+show bgp summary
+show bgp ipv4 uni
+show bgp ipv4 neighbors
+show bgp ipv4 summary
+show bgp ipv4 statistics
+
+show bgp ipv4 update-groups advertise-queue
+show bgp ipv4 update-groups advertised-routes
+show bgp ipv4 update-groups packet-queue
+show bgp ipv4 update-groups statistics
+show bgp peer-group
+show bgp memory
+
+show bgp ipv6
+show bgp ipv6 neighbors
+show bgp ipv6 summary
+show bgp ipv6 update-groups advertise-queue
+show bgp ipv6 update-groups advertised-routes
+show bgp ipv6 update-groups packet-queue
+show bgp ipv6 update-groups statistics
+show bgp ipv6 statistics
+show bgp martian next-hop
+show bgp nexthop
+
+show bgp vrf all summary
+show bgp vrf all ipv4
+show bgp vrf all ipv6
+show bgp vrf all neighbors
+
+show bgp evpn route
+show bgp l2vpn evpn route vni all
+show bgp l2vpn evpn vni
+show bgp l2vpn evpn import-rt
+show bgp l2vpn evpn vrf-import-rt
+show bgp l2vpn evpn all overlay
+show bgp l2vpn evpn summary
+show bgp l2vpn evpn route detail
+show bgp l2vpn evpn vni remote-ip-hash
+show bgp l2vpn evpn vni-svi-hash
+
+show evpn
+show evpn arp-cache vni all detail
+show evpn mac vni all detail
+show evpn next-hops vni all
+show evpn rmac vni all
+show evpn vni detail
+
+CMD_LIST_END
+
+# Zebra Support Bundle Command List
+PROC_NAME:zebra
+CMD_LIST_START
+show zebra
+show zebra client summary
+show zebra router table summary
+show ip zebra route dump
+show ipv6 zebra route dump
+show ip nht vrf all
+show ipv6 nht vrf all
+show ip route vrf all
+show ipv6 route vrf all
+show ip fib
+show ipv6 fib
+show nexthop-group rib
+show route-map
+show memory
+show interface vrf all
+show vrf
+show work-queues
+show debugging hashtable
+show running-config
+show thread cpu
+show thread poll
+show thread timers
+show daemons
+show version
+CMD_LIST_END
+
+# OSPF Support Bundle Command List
+PROC_NAME:ospf
+CMD_LIST_START
+show ip ospf vrf all
+show ip ospf vrfs
+
+show ip ospf vrf all interface
+show ip ospf vrf all interface traffic
+show ip ospf vrf all neighbor
+show ip ospf vrf all neighbor detail all
+show ip ospf vrf all graceful-restart helper detail
+
+show ip ospf vrf all border-routers
+show ip ospf vrf all summary-address detail
+
+show ip ospf vrf all database
+show ip ospf vrf all database router
+show ip ospf vrf all database network
+show ip ospf vrf all database summary
+show ip ospf vrf all database asbr-summary
+show ip ospf vrf all database external
+show ip ospf vrf all database opaque-area
+show ip ospf vrf all database opaque-as
+show ip ospf vrf all database opaque-link
+show ip ospf vrf all database nssa-external
+show ip ospf database segment-routing
+show ip ospf vrf all database max-age
+show ip ospf vrf all database self-originate
+show ip ospf vrf all route
+
+show ip ospf mpls ldp-sync
+show ip ospf mpls ldp-sync interface all
+
+show ip ospf vrf all mpls-te interface
+show ip ospf mpls-te database verbose
+show ip ospf mpls-te router
+
+show ip ospf router-info
+show ip ospf router-info pce
+CMD_LIST_END
+
+# RIP Support Bundle Command List
+# PROC_NAME:rip
+# CMD_LIST_START
+# CMD_LIST_END
+
+# ISIS Support Bundle Command List
+# PROC_NAME:isis
+# CMD_LIST_START
+# CMD_LIST_END
+
+# BFD Support Bundle Command List
+# PROC_NAME:bfd
+# CMD_LIST_START
+# CMD_LIST_END
+
+# STATIC Support Bundle Command List
+# PROC_NAME:static
+# CMD_LIST_START
+# CMD_LIST_END
+
+# PIM Support Bundle Command List
+PROC_NAME:pim
+CMD_LIST_START
+show ip multicast
+show ip pim interface
+show ip pim interface traffic
+show ip pim nexthop
+show ip pim neighbor
+show ip pim bsr
+show ip pim bsrp-info
+show ip pim bsm-database
+show ip pim rp-info
+show ip igmp groups
+show ip igmp interface
+show ip igmp join
+show ip igmp sources
+show ip igmp statistics
+show ip pim upstream
+show ip mroute
+show ip pim join
+show ip pim state
+show ip pim statistics
+show ip pim rpf
+CMD_LIST_END
+
+# OSPFv3 Support Bundle Command List
+PROC_NAME:ospf6
+CMD_LIST_START
+show ipv6 ospf6 vrf all
+show ipv6 ospf6 vrfs 
+show ipv6 ospf6 vrf all border-routers
+show ipv6 ospf6 vrf all border-routers detail
+show ipv6 ospf6 vrf all database
+show ipv6 ospf6 vrf all database detail
+show ipv6 ospf6 vrf all database dump
+show ipv6 ospf6 vrf all database internal
+show ipv6 ospf6 vrf all database router detail
+show ipv6 ospf6 vrf all database network detail
+show ipv6 ospf6 vrf all database inter-prefix detail
+show ipv6 ospf6 vrf all database inter-router detail
+show ipv6 ospf6 vrf all database intra-prefix detail
+show ipv6 ospf6 vrf all database link detail
+show ipv6 ospf6 vrf all database as-external detail
+show ipv6 ospf6 vrf all database self-originate detail
+show ipv6 ospf6 vrf all database type-7 detail
+show ipv6 ospf6 vrf all interface
+show ipv6 ospf6 vrf all interface prefix
+show ipv6 ospf6 vrf all interface traffic
+show ipv6 ospf6 vrf all linkstate detail
+show ipv6 ospf6 vrf all neighbor
+show ipv6 ospf6 vrf all neighbor drchoice
+show ipv6 ospf6 vrf all neighbor detail
+show ipv6 ospf6 vrf all redistribute
+show ipv6 ospf6 vrf all route
+show ipv6 ospf6 vrf all route external-1
+show ipv6 ospf6 vrf all route external-2
+show ipv6 ospf6 vrf all route inter-area
+show ipv6 ospf6 vrf all route intra-area
+show ipv6 ospf6 vrf all route detail
+show ipv6 ospf6 vrf all route summary
+show ipv6 ospf6 vrf all spf tree
+show ipv6 ospf6 vrf all summary-address detail
+show ipv6 ospf6 zebra
+CMD_LIST_END
+
+#PIMv6 Support Bundle Command List
+PROC_NAME:pim6
+CMD_LIST_START
+show ipv6 pim channel
+show ipv6 pim interface
+show ipv6 pim interface traffic
+show ipv6 pim join
+show ipv6 jp-agg
+show ipv6 pim nexthop
+show ipv6 pim nexthop-lookup
+show ipv6 pim neighbor
+show ipv6 pim local-membership
+show ipv6 pim rp-info
+show ipv6 pim rpf
+show ipv6 pim secondary
+show ipv6 pim state
+show ipv6 pim statistics
+show ipv6 pim upstream
+show ipv6 pim upstream-join-desired
+show ipv6 pim upstream-rpf
+show ipv6 mld interface
+show ipv6 mld statistics
+show ipv6 mld joins
+show ipv6 mld groups
+show ipv6 multicast
+show ipv6 mroute
+show ipv6 pim bsr
+show ipv6 pim bsrp-info
+show ipv6 pim bsm-databases
+CMD_LIST_END
+
+#MGMT Support Bundle Command List
+PROC_NAME:mgmt
+CMD_LIST_START
+show mgmt backend-adapter all
+show mgmt backend-yang-xpath-registry
+show mgmt commit-history
+show mgmt datastore all
+show mgmt datastore-contents candidate json
+show mgmt datastore-contents running json
+show mgmt frontend-adapter all detail
+show mgmt get-config candidate /
+show mgmt get-config running /
+show mgmt transaction all
+show mgmt yang-xpath-subscription /
+CMD_LIST_END
diff --git a/tools/etc/frr/vtysh.conf b/tools/etc/frr/vtysh.conf
new file mode 100644
index 0000000..e0ab9cb
--- /dev/null
+++ b/tools/etc/frr/vtysh.conf
@@ -0,0 +1 @@
+service integrated-vtysh-config
diff --git a/tools/etc/iproute2/rt_protos.d/frr.conf b/tools/etc/iproute2/rt_protos.d/frr.conf
new file mode 100644
index 0000000..bbb358f
--- /dev/null
+++ b/tools/etc/iproute2/rt_protos.d/frr.conf
@@ -0,0 +1,14 @@
+# Additional protocol strings defined by frr for each of its daemons
+
+186  bgp
+187  isis
+188  ospf
+189  rip
+190  ripng
+191  nhrp
+192  eigrp
+193  ldp
+194  sharp
+195  pbr
+196  static
+197  openfabric
diff --git a/tools/etc/logrotate.d/frr b/tools/etc/logrotate.d/frr
new file mode 100644
index 0000000..735af65
--- /dev/null
+++ b/tools/etc/logrotate.d/frr
@@ -0,0 +1,27 @@
+/var/log/frr/*.log {
+        size 500k
+        sharedscripts
+        missingok
+        compress
+        rotate 14
+        create 0640 frr frr
+
+        postrotate
+            pid=$(lsof -t -a -c /syslog/ /var/log/frr/* 2>/dev/null)
+            if [ -n "$pid" ]
+            then # using syslog
+                 kill -HUP $pid
+            fi
+            # in case using file logging; if switching back and forth
+            # between file and syslog, rsyslogd might still have file
+            # open, as well as the daemons, so always signal the daemons.
+            # It's safe, a NOP if (only) syslog is being used.
+            for i in babeld bgpd eigrpd isisd ldpd nhrpd ospf6d ospfd sharpd \
+                pimd pim6d ripd ripngd zebra pathd pbrd staticd bfdd fabricd vrrpd; do
+                if [ -e /var/run/frr/$i.pid ] ; then
+                    pids="$pids $(cat /var/run/frr/$i.pid)"
+                fi
+            done
+            [ -n "$pids" ] && kill -USR1 $pids || true
+        endscript
+}
diff --git a/tools/etc/rsyslog.d/45-frr.conf b/tools/etc/rsyslog.d/45-frr.conf
new file mode 100644
index 0000000..75b20d7
--- /dev/null
+++ b/tools/etc/rsyslog.d/45-frr.conf
@@ -0,0 +1,48 @@
+# The lines below cause all FRR daemons and process to go
+# to /var/log/frr/frr.log, then drops the message so it does
+# not also go to /var/log/syslog, so the messages are not duplicated
+
+$outchannel frr_log,/var/log/frr/frr.log
+if  $programname == 'babeld' or
+    $programname == 'bgpd' or
+    $programname == 'bfdd' or
+    $programname == 'eigrpd' or
+    $programname == 'frr' or
+    $programname == 'isisd' or
+    $programname == 'fabricd' or
+    $programname == 'ldpd' or
+    $programname == 'nhrpd' or
+    $programname == 'ospf6d' or
+    $programname == 'ospfd' or
+    $programname == 'pimd' or
+    $programname == 'pim6d' or
+    $programname == 'pathd' or
+    $programname == 'pbrd' or
+    $programname == 'ripd' or
+    $programname == 'ripngd' or
+    $programname == 'vrrpd' or
+    $programname == 'watchfrr' or
+    $programname == 'zebra'
+    then :omfile:$frr_log
+
+if  $programname == 'babeld' or
+    $programname == 'bgpd' or
+    $programname == 'bfdd' or
+    $programname == 'eigrpd' or
+    $programname == 'frr' or
+    $programname == 'isisd' or
+    $programname == 'fabricd' or
+    $programname == 'ldpd' or
+    $programname == 'nhrpd' or
+    $programname == 'ospf6d' or
+    $programname == 'ospfd' or
+    $programname == 'pimd' or
+    $programname == 'pim6d' or
+    $programname == 'pathd' or
+    $programname == 'pbrd' or
+    $programname == 'ripd' or
+    $programname == 'ripngd' or
+    $programname == 'vrrpd' or
+    $programname == 'watchfrr' or
+    $programname == 'zebra'
+    then stop