diff options
Diffstat (limited to 'doc/user/zebra.rst')
| -rw-r--r-- | doc/user/zebra.rst | 33 |
1 files changed, 24 insertions, 9 deletions
diff --git a/doc/user/zebra.rst b/doc/user/zebra.rst index 30b0204..37644dc 100644 --- a/doc/user/zebra.rst +++ b/doc/user/zebra.rst @@ -1356,6 +1356,9 @@ FPM Commands User FPM configurations: 1 User FPM disable requests: 0 +.. clicmd:: show fpm status [json] + + Show the FPM status. .. clicmd:: clear fpm counters @@ -1450,29 +1453,41 @@ To program the PBR rules as rte_flows you additionally need to configure zebra Terminal Mode Commands ============================ -.. clicmd:: show ip route +.. clicmd:: show [ip|ipv6] route Display current routes which zebra holds in its database. :: Router# show ip route - Codes: K - kernel route, C - connected, S - static, R - RIP, - B - BGP * - FIB route. - - K* 0.0.0.0/0 203.181.89.241 - S 0.0.0.0/0 203.181.89.1 - C* 127.0.0.0/8 lo - C* 203.181.89.240/28 eth0 + Codes: K - kernel route, C - connected, L - local, S - static, + R - RIP, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, + F - PBR, f - OpenFabric, t - Table-Direct, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 00:30:22 + S> 4.5.6.7/32 [1/0] via 192.168.119.1 (recursive), weight 1, 00:30:22 + * via 192.168.119.1, enp13s0, weight 1, 00:30:22 + K>* 169.254.0.0/16 [0/1000] is directly connected, virbr2 linkdown, 00:30:22 + L>* 192.168.119.205/32 is directly connected, enp13s0, 00:30:22 -.. clicmd:: show ipv6 route .. clicmd:: show [ip|ipv6] route [PREFIX] [nexthop-group] Display detailed information about a route. If [nexthop-group] is included, it will display the nexthop group ID the route is using as well. +.. clicmd:: show [ip|ipv6] route summary + + Display summary information about routes received from each protocol. + This command displays the entries received from each route and as such + this total can be more than the actual number of FIB routes. Finally + due to the way that linux supports local and connected routes the FIB + total may not be exactly what is shown in the equivalent `ip route show` + command to see the state of the linux kernel. + .. clicmd:: show interface [NAME] [{vrf VRF|brief}] [json] .. clicmd:: show interface [NAME] [{vrf all|brief}] [json] |