diff options
Diffstat (limited to 'Documentation/git-diff.txt')
| -rw-r--r-- | Documentation/git-diff.txt | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt new file mode 100644 index 0000000..08087ff --- /dev/null +++ b/Documentation/git-diff.txt @@ -0,0 +1,242 @@ +git-diff(1) +=========== + +NAME +---- +git-diff - Show changes between commits, commit and working tree, etc + + +SYNOPSIS +-------- +[verse] +'git diff' [<options>] [<commit>] [--] [<path>...] +'git diff' [<options>] --cached [--merge-base] [<commit>] [--] [<path>...] +'git diff' [<options>] [--merge-base] <commit> [<commit>...] <commit> [--] [<path>...] +'git diff' [<options>] <commit>...<commit> [--] [<path>...] +'git diff' [<options>] <blob> <blob> +'git diff' [<options>] --no-index [--] <path> <path> + +DESCRIPTION +----------- +Show changes between the working tree and the index or a tree, changes +between the index and a tree, changes between two trees, changes resulting +from a merge, changes between two blob objects, or changes between two +files on disk. + +'git diff' [<options>] [--] [<path>...]:: + + This form is to view the changes you made relative to + the index (staging area for the next commit). In other + words, the differences are what you _could_ tell Git to + further add to the index but you still haven't. You can + stage these changes by using linkgit:git-add[1]. + +'git diff' [<options>] --no-index [--] <path> <path>:: + + This form is to compare the given two paths on the + filesystem. You can omit the `--no-index` option when + running the command in a working tree controlled by Git and + at least one of the paths points outside the working tree, + or when running the command outside a working tree + controlled by Git. This form implies `--exit-code`. + +'git diff' [<options>] --cached [--merge-base] [<commit>] [--] [<path>...]:: + + This form is to view the changes you staged for the next + commit relative to the named <commit>. Typically you + would want comparison with the latest commit, so if you + do not give <commit>, it defaults to HEAD. + If HEAD does not exist (e.g. unborn branches) and + <commit> is not given, it shows all staged changes. + --staged is a synonym of --cached. ++ +If --merge-base is given, instead of using <commit>, use the merge base +of <commit> and HEAD. `git diff --cached --merge-base A` is equivalent to +`git diff --cached $(git merge-base A HEAD)`. + +'git diff' [<options>] [--merge-base] <commit> [--] [<path>...]:: + + This form is to view the changes you have in your + working tree relative to the named <commit>. You can + use HEAD to compare it with the latest commit, or a + branch name to compare with the tip of a different + branch. ++ +If --merge-base is given, instead of using <commit>, use the merge base +of <commit> and HEAD. `git diff --merge-base A` is equivalent to +`git diff $(git merge-base A HEAD)`. + +'git diff' [<options>] [--merge-base] <commit> <commit> [--] [<path>...]:: + + This is to view the changes between two arbitrary + <commit>. ++ +If --merge-base is given, use the merge base of the two commits for the +"before" side. `git diff --merge-base A B` is equivalent to +`git diff $(git merge-base A B) B`. + +'git diff' [<options>] <commit> <commit>... <commit> [--] [<path>...]:: + + This form is to view the results of a merge commit. The first + listed <commit> must be the merge itself; the remaining two or + more commits should be its parents. Convenient ways to produce + the desired set of revisions are to use the suffixes `^@` and + `^!`. If A is a merge commit, then `git diff A A^@`, + `git diff A^!` and `git show A` all give the same combined diff. + +'git diff' [<options>] <commit>..<commit> [--] [<path>...]:: + + This is synonymous to the earlier form (without the `..`) for + viewing the changes between two arbitrary <commit>. If <commit> on + one side is omitted, it will have the same effect as + using HEAD instead. + +'git diff' [<options>] <commit>\...<commit> [--] [<path>...]:: + + This form is to view the changes on the branch containing + and up to the second <commit>, starting at a common ancestor + of both <commit>. `git diff A...B` is equivalent to + `git diff $(git merge-base A B) B`. You can omit any one + of <commit>, which has the same effect as using HEAD instead. + +Just in case you are doing something exotic, it should be +noted that all of the <commit> in the above description, except +in the `--merge-base` case and in the last two forms that use `..` +notations, can be any <tree>. A tree of interest is the one pointed to +by the special ref `AUTO_MERGE`, which is written by the 'ort' merge +strategy upon hitting merge conflicts (see linkgit:git-merge[1]). +Comparing the working tree with `AUTO_MERGE` shows changes you've made +so far to resolve textual conflicts (see the examples below). + +For a more complete list of ways to spell <commit>, see +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. +However, "diff" is about comparing two _endpoints_, not ranges, +and the range notations (`<commit>..<commit>` and +`<commit>...<commit>`) do not mean a range as defined in the +"SPECIFYING RANGES" section in linkgit:gitrevisions[7]. + +'git diff' [<options>] <blob> <blob>:: + + This form is to view the differences between the raw + contents of two blob objects. + +OPTIONS +------- +:git-diff: 1 +include::diff-options.txt[] + +-1 --base:: +-2 --ours:: +-3 --theirs:: + Compare the working tree with the "base" version (stage #1), + "our branch" (stage #2) or "their branch" (stage #3). The + index contains these stages only for unmerged entries i.e. + while resolving conflicts. See linkgit:git-read-tree[1] + section "3-Way Merge" for detailed information. + +-0:: + Omit diff output for unmerged entries and just show + "Unmerged". Can be used only when comparing the working tree + with the index. + +<path>...:: + The <paths> parameters, when given, are used to limit + the diff to the named paths (you can give directory + names and get diff for all files under them). + + +include::diff-format.txt[] + +EXAMPLES +-------- + +Various ways to check your working tree:: ++ +------------ +$ git diff <1> +$ git diff --cached <2> +$ git diff HEAD <3> +$ git diff AUTO_MERGE <4> +------------ ++ +<1> Changes in the working tree not yet staged for the next commit. +<2> Changes between the index and your last commit; what you + would be committing if you run `git commit` without `-a` option. +<3> Changes in the working tree since your last commit; what you + would be committing if you run `git commit -a` +<4> Changes in the working tree you've made to resolve textual + conflicts so far. + +Comparing with arbitrary commits:: ++ +------------ +$ git diff test <1> +$ git diff HEAD -- ./test <2> +$ git diff HEAD^ HEAD <3> +------------ ++ +<1> Instead of using the tip of the current branch, compare with the + tip of "test" branch. +<2> Instead of comparing with the tip of "test" branch, compare with + the tip of the current branch, but limit the comparison to the + file "test". +<3> Compare the version before the last commit and the last commit. + +Comparing branches:: ++ +------------ +$ git diff topic master <1> +$ git diff topic..master <2> +$ git diff topic...master <3> +------------ ++ +<1> Changes between the tips of the topic and the master branches. +<2> Same as above. +<3> Changes that occurred on the master branch since when the topic + branch was started off it. + +Limiting the diff output:: ++ +------------ +$ git diff --diff-filter=MRC <1> +$ git diff --name-status <2> +$ git diff arch/i386 include/asm-i386 <3> +------------ ++ +<1> Show only modification, rename, and copy, but not addition + or deletion. +<2> Show only names and the nature of change, but not actual + diff output. +<3> Limit diff output to named subtrees. + +Munging the diff output:: ++ +------------ +$ git diff --find-copies-harder -B -C <1> +$ git diff -R <2> +------------ ++ +<1> Spend extra cycles to find renames, copies and complete + rewrites (very expensive). +<2> Output diff in reverse. + +CONFIGURATION +------------- + +include::includes/cmd-config-section-all.txt[] + +include::config/diff.txt[] + +SEE ALSO +-------- +diff(1), +linkgit:git-difftool[1], +linkgit:git-log[1], +linkgit:gitdiffcore[7], +linkgit:git-format-patch[1], +linkgit:git-apply[1], +linkgit:git-show[1] + +GIT +--- +Part of the linkgit:git[1] suite |