diff options
Diffstat (limited to 'Documentation/git-fast-import.txt')
| -rw-r--r-- | Documentation/git-fast-import.txt | 1580 |
1 files changed, 1580 insertions, 0 deletions
diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt new file mode 100644 index 0000000..bd7b1e0 --- /dev/null +++ b/Documentation/git-fast-import.txt @@ -0,0 +1,1580 @@ +git-fast-import(1) +================== + +NAME +---- +git-fast-import - Backend for fast Git data importers + + +SYNOPSIS +-------- +[verse] +frontend | 'git fast-import' [<options>] + +DESCRIPTION +----------- +This program is usually not what the end user wants to run directly. +Most end users want to use one of the existing frontend programs, +which parses a specific type of foreign source and feeds the contents +stored there to 'git fast-import'. + +fast-import reads a mixed command/data stream from standard input and +writes one or more packfiles directly into the current repository. +When EOF is received on standard input, fast import writes out +updated branch and tag refs, fully updating the current repository +with the newly imported data. + +The fast-import backend itself can import into an empty repository (one that +has already been initialized by 'git init') or incrementally +update an existing populated repository. Whether or not incremental +imports are supported from a particular foreign source depends on +the frontend program in use. + + +OPTIONS +------- + +--force:: + Force updating modified existing branches, even if doing + so would cause commits to be lost (as the new commit does + not contain the old commit). + +--quiet:: + Disable the output shown by --stats, making fast-import usually + be silent when it is successful. However, if the import stream + has directives intended to show user output (e.g. `progress` + directives), the corresponding messages will still be shown. + +--stats:: + Display some basic statistics about the objects fast-import has + created, the packfiles they were stored into, and the + memory used by fast-import during this run. Showing this output + is currently the default, but can be disabled with --quiet. + +--allow-unsafe-features:: + Many command-line options can be provided as part of the + fast-import stream itself by using the `feature` or `option` + commands. However, some of these options are unsafe (e.g., + allowing fast-import to access the filesystem outside of the + repository). These options are disabled by default, but can be + allowed by providing this option on the command line. This + currently impacts only the `export-marks`, `import-marks`, and + `import-marks-if-exists` feature commands. ++ + Only enable this option if you trust the program generating the + fast-import stream! This option is enabled automatically for + remote-helpers that use the `import` capability, as they are + already trusted to run their own code. + +Options for Frontends +~~~~~~~~~~~~~~~~~~~~~ + +--cat-blob-fd=<fd>:: + Write responses to `get-mark`, `cat-blob`, and `ls` queries to the + file descriptor <fd> instead of `stdout`. Allows `progress` + output intended for the end-user to be separated from other + output. + +--date-format=<fmt>:: + Specify the type of dates the frontend will supply to + fast-import within `author`, `committer` and `tagger` commands. + See ``Date Formats'' below for details about which formats + are supported, and their syntax. + +--done:: + Terminate with error if there is no `done` command at the end of + the stream. This option might be useful for detecting errors + that cause the frontend to terminate before it has started to + write a stream. + +Locations of Marks Files +~~~~~~~~~~~~~~~~~~~~~~~~ + +--export-marks=<file>:: + Dumps the internal marks table to <file> when complete. + Marks are written one per line as `:markid SHA-1`. + Frontends can use this file to validate imports after they + have been completed, or to save the marks table across + incremental runs. As <file> is only opened and truncated + at checkpoint (or completion) the same path can also be + safely given to --import-marks. + +--import-marks=<file>:: + Before processing any input, load the marks specified in + <file>. The input file must exist, must be readable, and + must use the same format as produced by --export-marks. + Multiple options may be supplied to import more than one + set of marks. If a mark is defined to different values, + the last file wins. + +--import-marks-if-exists=<file>:: + Like --import-marks but instead of erroring out, silently + skips the file if it does not exist. + +--[no-]relative-marks:: + After specifying --relative-marks the paths specified + with --import-marks= and --export-marks= are relative + to an internal directory in the current repository. + In git-fast-import this means that the paths are relative + to the .git/info/fast-import directory. However, other + importers may use a different location. ++ +Relative and non-relative marks may be combined by interweaving +--(no-)-relative-marks with the --(import|export)-marks= options. + +Submodule Rewriting +~~~~~~~~~~~~~~~~~~~ + +--rewrite-submodules-from=<name>:<file>:: +--rewrite-submodules-to=<name>:<file>:: + Rewrite the object IDs for the submodule specified by <name> from the values + used in the from <file> to those used in the to <file>. The from marks should + have been created by `git fast-export`, and the to marks should have been + created by `git fast-import` when importing that same submodule. ++ +<name> may be any arbitrary string not containing a colon character, but the +same value must be used with both options when specifying corresponding marks. +Multiple submodules may be specified with different values for <name>. It is an +error not to use these options in corresponding pairs. ++ +These options are primarily useful when converting a repository from one hash +algorithm to another; without them, fast-import will fail if it encounters a +submodule because it has no way of writing the object ID into the new hash +algorithm. + +Performance and Compression Tuning +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +--active-branches=<n>:: + Maximum number of branches to maintain active at once. + See ``Memory Utilization'' below for details. Default is 5. + +--big-file-threshold=<n>:: + Maximum size of a blob that fast-import will attempt to + create a delta for, expressed in bytes. The default is 512m + (512 MiB). Some importers may wish to lower this on systems + with constrained memory. + +--depth=<n>:: + Maximum delta depth, for blob and tree deltification. + Default is 50. + +--export-pack-edges=<file>:: + After creating a packfile, print a line of data to + <file> listing the filename of the packfile and the last + commit on each branch that was written to that packfile. + This information may be useful after importing projects + whose total object set exceeds the 4 GiB packfile limit, + as these commits can be used as edge points during calls + to 'git pack-objects'. + +--max-pack-size=<n>:: + Maximum size of each output packfile. + The default is unlimited. + +fastimport.unpackLimit:: + See linkgit:git-config[1] + +PERFORMANCE +----------- +The design of fast-import allows it to import large projects in a minimum +amount of memory usage and processing time. Assuming the frontend +is able to keep up with fast-import and feed it a constant stream of data, +import times for projects holding 10+ years of history and containing +100,000+ individual commits are generally completed in just 1-2 +hours on quite modest (~$2,000 USD) hardware. + +Most bottlenecks appear to be in foreign source data access (the +source just cannot extract revisions fast enough) or disk IO (fast-import +writes as fast as the disk will take the data). Imports will run +faster if the source data is stored on a different drive than the +destination Git repository (due to less IO contention). + + +DEVELOPMENT COST +---------------- +A typical frontend for fast-import tends to weigh in at approximately 200 +lines of Perl/Python/Ruby code. Most developers have been able to +create working importers in just a couple of hours, even though it +is their first exposure to fast-import, and sometimes even to Git. This is +an ideal situation, given that most conversion tools are throw-away +(use once, and never look back). + + +PARALLEL OPERATION +------------------ +Like 'git push' or 'git fetch', imports handled by fast-import are safe to +run alongside parallel `git repack -a -d` or `git gc` invocations, +or any other Git operation (including 'git prune', as loose objects +are never used by fast-import). + +fast-import does not lock the branch or tag refs it is actively importing. +After the import, during its ref update phase, fast-import tests each +existing branch ref to verify the update will be a fast-forward +update (the commit stored in the ref is contained in the new +history of the commit to be written). If the update is not a +fast-forward update, fast-import will skip updating that ref and instead +prints a warning message. fast-import will always attempt to update all +branch refs, and does not stop on the first failure. + +Branch updates can be forced with --force, but it's recommended that +this only be used on an otherwise quiet repository. Using --force +is not necessary for an initial import into an empty repository. + + +TECHNICAL DISCUSSION +-------------------- +fast-import tracks a set of branches in memory. Any branch can be created +or modified at any point during the import process by sending a +`commit` command on the input stream. This design allows a frontend +program to process an unlimited number of branches simultaneously, +generating commits in the order they are available from the source +data. It also simplifies the frontend programs considerably. + +fast-import does not use or alter the current working directory, or any +file within it. (It does however update the current Git repository, +as referenced by `GIT_DIR`.) Therefore an import frontend may use +the working directory for its own purposes, such as extracting file +revisions from the foreign source. This ignorance of the working +directory also allows fast-import to run very quickly, as it does not +need to perform any costly file update operations when switching +between branches. + +INPUT FORMAT +------------ +With the exception of raw file data (which Git does not interpret) +the fast-import input format is text (ASCII) based. This text based +format simplifies development and debugging of frontend programs, +especially when a higher level language such as Perl, Python or +Ruby is being used. + +fast-import is very strict about its input. Where we say SP below we mean +*exactly* one space. Likewise LF means one (and only one) linefeed +and HT one (and only one) horizontal tab. +Supplying additional whitespace characters will cause unexpected +results, such as branch names or file names with leading or trailing +spaces in their name, or early termination of fast-import when it encounters +unexpected input. + +Stream Comments +~~~~~~~~~~~~~~~ +To aid in debugging frontends fast-import ignores any line that +begins with `#` (ASCII pound/hash) up to and including the line +ending `LF`. A comment line may contain any sequence of bytes +that does not contain an LF and therefore may be used to include +any detailed debugging information that might be specific to the +frontend and useful when inspecting a fast-import data stream. + +Date Formats +~~~~~~~~~~~~ +The following date formats are supported. A frontend should select +the format it will use for this import by passing the format name +in the --date-format=<fmt> command-line option. + +`raw`:: + This is the Git native format and is `<time> SP <offutc>`. + It is also fast-import's default format, if --date-format was + not specified. ++ +The time of the event is specified by `<time>` as the number of +seconds since the UNIX epoch (midnight, Jan 1, 1970, UTC) and is +written as an ASCII decimal integer. ++ +The local offset is specified by `<offutc>` as a positive or negative +offset from UTC. For example EST (which is 5 hours behind UTC) +would be expressed in `<tz>` by ``-0500'' while UTC is ``+0000''. +The local offset does not affect `<time>`; it is used only as an +advisement to help formatting routines display the timestamp. ++ +If the local offset is not available in the source material, use +``+0000'', or the most common local offset. For example many +organizations have a CVS repository which has only ever been accessed +by users who are located in the same location and time zone. In this +case a reasonable offset from UTC could be assumed. ++ +Unlike the `rfc2822` format, this format is very strict. Any +variation in formatting will cause fast-import to reject the value, +and some sanity checks on the numeric values may also be performed. + +`raw-permissive`:: + This is the same as `raw` except that no sanity checks on + the numeric epoch and local offset are performed. This can + be useful when trying to filter or import an existing history + with e.g. bogus timezone values. + +`rfc2822`:: + This is the standard email format as described by RFC 2822. ++ +An example value is ``Tue Feb 6 11:22:18 2007 -0500''. The Git +parser is accurate, but a little on the lenient side. It is the +same parser used by 'git am' when applying patches +received from email. ++ +Some malformed strings may be accepted as valid dates. In some of +these cases Git will still be able to obtain the correct date from +the malformed string. There are also some types of malformed +strings which Git will parse wrong, and yet consider valid. +Seriously malformed strings will be rejected. ++ +Unlike the `raw` format above, the time zone/UTC offset information +contained in an RFC 2822 date string is used to adjust the date +value to UTC prior to storage. Therefore it is important that +this information be as accurate as possible. ++ +If the source material uses RFC 2822 style dates, +the frontend should let fast-import handle the parsing and conversion +(rather than attempting to do it itself) as the Git parser has +been well tested in the wild. ++ +Frontends should prefer the `raw` format if the source material +already uses UNIX-epoch format, can be coaxed to give dates in that +format, or its format is easily convertible to it, as there is no +ambiguity in parsing. + +`now`:: + Always use the current time and time zone. The literal + `now` must always be supplied for `<when>`. ++ +This is a toy format. The current time and time zone of this system +is always copied into the identity string at the time it is being +created by fast-import. There is no way to specify a different time or +time zone. ++ +This particular format is supplied as it's short to implement and +may be useful to a process that wants to create a new commit +right now, without needing to use a working directory or +'git update-index'. ++ +If separate `author` and `committer` commands are used in a `commit` +the timestamps may not match, as the system clock will be polled +twice (once for each command). The only way to ensure that both +author and committer identity information has the same timestamp +is to omit `author` (thus copying from `committer`) or to use a +date format other than `now`. + +Commands +~~~~~~~~ +fast-import accepts several commands to update the current repository +and control the current import process. More detailed discussion +(with examples) of each command follows later. + +`commit`:: + Creates a new branch or updates an existing branch by + creating a new commit and updating the branch to point at + the newly created commit. + +`tag`:: + Creates an annotated tag object from an existing commit or + branch. Lightweight tags are not supported by this command, + as they are not recommended for recording meaningful points + in time. + +`reset`:: + Reset an existing branch (or a new branch) to a specific + revision. This command must be used to change a branch to + a specific revision without making a commit on it. + +`blob`:: + Convert raw file data into a blob, for future use in a + `commit` command. This command is optional and is not + needed to perform an import. + +`alias`:: + Record that a mark refers to a given object without first + creating any new object. Using --import-marks and referring + to missing marks will cause fast-import to fail, so aliases + can provide a way to set otherwise pruned commits to a valid + value (e.g. the nearest non-pruned ancestor). + +`checkpoint`:: + Forces fast-import to close the current packfile, generate its + unique SHA-1 checksum and index, and start a new packfile. + This command is optional and is not needed to perform + an import. + +`progress`:: + Causes fast-import to echo the entire line to its own + standard output. This command is optional and is not needed + to perform an import. + +`done`:: + Marks the end of the stream. This command is optional + unless the `done` feature was requested using the + `--done` command-line option or `feature done` command. + +`get-mark`:: + Causes fast-import to print the SHA-1 corresponding to a mark + to the file descriptor set with `--cat-blob-fd`, or `stdout` if + unspecified. + +`cat-blob`:: + Causes fast-import to print a blob in 'cat-file --batch' + format to the file descriptor set with `--cat-blob-fd` or + `stdout` if unspecified. + +`ls`:: + Causes fast-import to print a line describing a directory + entry in 'ls-tree' format to the file descriptor set with + `--cat-blob-fd` or `stdout` if unspecified. + +`feature`:: + Enable the specified feature. This requires that fast-import + supports the specified feature, and aborts if it does not. + +`option`:: + Specify any of the options listed under OPTIONS that do not + change stream semantic to suit the frontend's needs. This + command is optional and is not needed to perform an import. + +`commit` +~~~~~~~~ +Create or update a branch with a new commit, recording one logical +change to the project. + +.... + 'commit' SP <ref> LF + mark? + original-oid? + ('author' (SP <name>)? SP LT <email> GT SP <when> LF)? + 'committer' (SP <name>)? SP LT <email> GT SP <when> LF + ('encoding' SP <encoding>)? + data + ('from' SP <commit-ish> LF)? + ('merge' SP <commit-ish> LF)* + (filemodify | filedelete | filecopy | filerename | filedeleteall | notemodify)* + LF? +.... + +where `<ref>` is the name of the branch to make the commit on. +Typically branch names are prefixed with `refs/heads/` in +Git, so importing the CVS branch symbol `RELENG-1_0` would use +`refs/heads/RELENG-1_0` for the value of `<ref>`. The value of +`<ref>` must be a valid refname in Git. As `LF` is not valid in +a Git refname, no quoting or escaping syntax is supported here. + +A `mark` command may optionally appear, requesting fast-import to save a +reference to the newly created commit for future use by the frontend +(see below for format). It is very common for frontends to mark +every commit they create, thereby allowing future branch creation +from any imported commit. + +The `data` command following `committer` must supply the commit +message (see below for `data` command syntax). To import an empty +commit message use a 0 length data. Commit messages are free-form +and are not interpreted by Git. Currently they must be encoded in +UTF-8, as fast-import does not permit other encodings to be specified. + +Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename`, +`filedeleteall` and `notemodify` commands +may be included to update the contents of the branch prior to +creating the commit. These commands may be supplied in any order. +However it is recommended that a `filedeleteall` command precede +all `filemodify`, `filecopy`, `filerename` and `notemodify` commands in +the same commit, as `filedeleteall` wipes the branch clean (see below). + +The `LF` after the command is optional (it used to be required). Note +that for reasons of backward compatibility, if the commit ends with a +`data` command (i.e. it has no `from`, `merge`, `filemodify`, +`filedelete`, `filecopy`, `filerename`, `filedeleteall` or +`notemodify` commands) then two `LF` commands may appear at the end of +the command instead of just one. + +`author` +^^^^^^^^ +An `author` command may optionally appear, if the author information +might differ from the committer information. If `author` is omitted +then fast-import will automatically use the committer's information for +the author portion of the commit. See below for a description of +the fields in `author`, as they are identical to `committer`. + +`committer` +^^^^^^^^^^^ +The `committer` command indicates who made this commit, and when +they made it. + +Here `<name>` is the person's display name (for example +``Com M Itter'') and `<email>` is the person's email address +(``\cm@example.com''). `LT` and `GT` are the literal less-than (\x3c) +and greater-than (\x3e) symbols. These are required to delimit +the email address from the other fields in the line. Note that +`<name>` and `<email>` are free-form and may contain any sequence +of bytes, except `LT`, `GT` and `LF`. `<name>` is typically UTF-8 encoded. + +The time of the change is specified by `<when>` using the date format +that was selected by the --date-format=<fmt> command-line option. +See ``Date Formats'' above for the set of supported formats, and +their syntax. + +`encoding` +^^^^^^^^^^ +The optional `encoding` command indicates the encoding of the commit +message. Most commits are UTF-8 and the encoding is omitted, but this +allows importing commit messages into git without first reencoding them. + +`from` +^^^^^^ +The `from` command is used to specify the commit to initialize +this branch from. This revision will be the first ancestor of the +new commit. The state of the tree built at this commit will begin +with the state at the `from` commit, and be altered by the content +modifications in this commit. + +Omitting the `from` command in the first commit of a new branch +will cause fast-import to create that commit with no ancestor. This +tends to be desired only for the initial commit of a project. +If the frontend creates all files from scratch when making a new +branch, a `merge` command may be used instead of `from` to start +the commit with an empty tree. +Omitting the `from` command on existing branches is usually desired, +as the current commit on that branch is automatically assumed to +be the first ancestor of the new commit. + +As `LF` is not valid in a Git refname or SHA-1 expression, no +quoting or escaping syntax is supported within `<commit-ish>`. + +Here `<commit-ish>` is any of the following: + +* The name of an existing branch already in fast-import's internal branch + table. If fast-import doesn't know the name, it's treated as a SHA-1 + expression. + +* A mark reference, `:<idnum>`, where `<idnum>` is the mark number. ++ +The reason fast-import uses `:` to denote a mark reference is this character +is not legal in a Git branch name. The leading `:` makes it easy +to distinguish between the mark 42 (`:42`) and the branch 42 (`42` +or `refs/heads/42`), or an abbreviated SHA-1 which happened to +consist only of base-10 digits. ++ +Marks must be declared (via `mark`) before they can be used. + +* A complete 40 byte or abbreviated commit SHA-1 in hex. + +* Any valid Git SHA-1 expression that resolves to a commit. See + ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[7] for details. + +* The special null SHA-1 (40 zeros) specifies that the branch is to be + removed. + +The special case of restarting an incremental import from the +current branch value should be written as: +---- + from refs/heads/branch^0 +---- +The `^0` suffix is necessary as fast-import does not permit a branch to +start from itself, and the branch is created in memory before the +`from` command is even read from the input. Adding `^0` will force +fast-import to resolve the commit through Git's revision parsing library, +rather than its internal branch table, thereby loading in the +existing value of the branch. + +`merge` +^^^^^^^ +Includes one additional ancestor commit. The additional ancestry +link does not change the way the tree state is built at this commit. +If the `from` command is +omitted when creating a new branch, the first `merge` commit will be +the first ancestor of the current commit, and the branch will start +out with no files. An unlimited number of `merge` commands per +commit are permitted by fast-import, thereby establishing an n-way merge. + +Here `<commit-ish>` is any of the commit specification expressions +also accepted by `from` (see above). + +`filemodify` +^^^^^^^^^^^^ +Included in a `commit` command to add a new file or change the +content of an existing file. This command has two different means +of specifying the content of the file. + +External data format:: + The data content for the file was already supplied by a prior + `blob` command. The frontend just needs to connect it. ++ +.... + 'M' SP <mode> SP <dataref> SP <path> LF +.... ++ +Here usually `<dataref>` must be either a mark reference (`:<idnum>`) +set by a prior `blob` command, or a full 40-byte SHA-1 of an +existing Git blob object. If `<mode>` is `040000`` then +`<dataref>` must be the full 40-byte SHA-1 of an existing +Git tree object or a mark reference set with `--import-marks`. + +Inline data format:: + The data content for the file has not been supplied yet. + The frontend wants to supply it as part of this modify + command. ++ +.... + 'M' SP <mode> SP 'inline' SP <path> LF + data +.... ++ +See below for a detailed description of the `data` command. + +In both formats `<mode>` is the type of file entry, specified +in octal. Git only supports the following modes: + +* `100644` or `644`: A normal (not-executable) file. The majority + of files in most projects use this mode. If in doubt, this is + what you want. +* `100755` or `755`: A normal, but executable, file. +* `120000`: A symlink, the content of the file will be the link target. +* `160000`: A gitlink, SHA-1 of the object refers to a commit in + another repository. Git links can only be specified either by SHA or through + a commit mark. They are used to implement submodules. +* `040000`: A subdirectory. Subdirectories can only be specified by + SHA or through a tree mark set with `--import-marks`. + +In both formats `<path>` is the complete path of the file to be added +(if not already existing) or modified (if already existing). + +A `<path>` string must use UNIX-style directory separators (forward +slash `/`), may contain any byte other than `LF`, and must not +start with double quote (`"`). + +A path can use C-style string quoting; this is accepted in all cases +and mandatory if the filename starts with double quote or contains +`LF`. In C-style quoting, the complete name should be surrounded with +double quotes, and any `LF`, backslash, or double quote characters +must be escaped by preceding them with a backslash (e.g., +`"path/with\n, \\ and \" in it"`). + +The value of `<path>` must be in canonical form. That is it must not: + +* contain an empty directory component (e.g. `foo//bar` is invalid), +* end with a directory separator (e.g. `foo/` is invalid), +* start with a directory separator (e.g. `/foo` is invalid), +* contain the special component `.` or `..` (e.g. `foo/./bar` and + `foo/../bar` are invalid). + +The root of the tree can be represented by an empty string as `<path>`. + +It is recommended that `<path>` always be encoded using UTF-8. + +`filedelete` +^^^^^^^^^^^^ +Included in a `commit` command to remove a file or recursively +delete an entire directory from the branch. If the file or directory +removal makes its parent directory empty, the parent directory will +be automatically removed too. This cascades up the tree until the +first non-empty directory or the root is reached. + +.... + 'D' SP <path> LF +.... + +here `<path>` is the complete path of the file or subdirectory to +be removed from the branch. +See `filemodify` above for a detailed description of `<path>`. + +`filecopy` +^^^^^^^^^^ +Recursively copies an existing file or subdirectory to a different +location within the branch. The existing file or directory must +exist. If the destination exists it will be completely replaced +by the content copied from the source. + +.... + 'C' SP <path> SP <path> LF +.... + +here the first `<path>` is the source location and the second +`<path>` is the destination. See `filemodify` above for a detailed +description of what `<path>` may look like. To use a source path +that contains SP the path must be quoted. + +A `filecopy` command takes effect immediately. Once the source +location has been copied to the destination any future commands +applied to the source location will not impact the destination of +the copy. + +`filerename` +^^^^^^^^^^^^ +Renames an existing file or subdirectory to a different location +within the branch. The existing file or directory must exist. If +the destination exists it will be replaced by the source directory. + +.... + 'R' SP <path> SP <path> LF +.... + +here the first `<path>` is the source location and the second +`<path>` is the destination. See `filemodify` above for a detailed +description of what `<path>` may look like. To use a source path +that contains SP the path must be quoted. + +A `filerename` command takes effect immediately. Once the source +location has been renamed to the destination any future commands +applied to the source location will create new files there and not +impact the destination of the rename. + +Note that a `filerename` is the same as a `filecopy` followed by a +`filedelete` of the source location. There is a slight performance +advantage to using `filerename`, but the advantage is so small +that it is never worth trying to convert a delete/add pair in +source material into a rename for fast-import. This `filerename` +command is provided just to simplify frontends that already have +rename information and don't want bother with decomposing it into a +`filecopy` followed by a `filedelete`. + +`filedeleteall` +^^^^^^^^^^^^^^^ +Included in a `commit` command to remove all files (and also all +directories) from the branch. This command resets the internal +branch structure to have no files in it, allowing the frontend +to subsequently add all interesting files from scratch. + +.... + 'deleteall' LF +.... + +This command is extremely useful if the frontend does not know +(or does not care to know) what files are currently on the branch, +and therefore cannot generate the proper `filedelete` commands to +update the content. + +Issuing a `filedeleteall` followed by the needed `filemodify` +commands to set the correct content will produce the same results +as sending only the needed `filemodify` and `filedelete` commands. +The `filedeleteall` approach may however require fast-import to use slightly +more memory per active branch (less than 1 MiB for even most large +projects); so frontends that can easily obtain only the affected +paths for a commit are encouraged to do so. + +`notemodify` +^^^^^^^^^^^^ +Included in a `commit` `<notes_ref>` command to add a new note +annotating a `<commit-ish>` or change this annotation contents. +Internally it is similar to filemodify 100644 on `<commit-ish>` +path (maybe split into subdirectories). It's not advised to +use any other commands to write to the `<notes_ref>` tree except +`filedeleteall` to delete all existing notes in this tree. +This command has two different means of specifying the content +of the note. + +External data format:: + The data content for the note was already supplied by a prior + `blob` command. The frontend just needs to connect it to the + commit that is to be annotated. ++ +.... + 'N' SP <dataref> SP <commit-ish> LF +.... ++ +Here `<dataref>` can be either a mark reference (`:<idnum>`) +set by a prior `blob` command, or a full 40-byte SHA-1 of an +existing Git blob object. + +Inline data format:: + The data content for the note has not been supplied yet. + The frontend wants to supply it as part of this modify + command. ++ +.... + 'N' SP 'inline' SP <commit-ish> LF + data +.... ++ +See below for a detailed description of the `data` command. + +In both formats `<commit-ish>` is any of the commit specification +expressions also accepted by `from` (see above). + +`mark` +~~~~~~ +Arranges for fast-import to save a reference to the current object, allowing +the frontend to recall this object at a future point in time, without +knowing its SHA-1. Here the current object is the object creation +command the `mark` command appears within. This can be `commit`, +`tag`, and `blob`, but `commit` is the most common usage. + +.... + 'mark' SP ':' <idnum> LF +.... + +where `<idnum>` is the number assigned by the frontend to this mark. +The value of `<idnum>` is expressed as an ASCII decimal integer. +The value 0 is reserved and cannot be used as +a mark. Only values greater than or equal to 1 may be used as marks. + +New marks are created automatically. Existing marks can be moved +to another object simply by reusing the same `<idnum>` in another +`mark` command. + +`original-oid` +~~~~~~~~~~~~~~ +Provides the name of the object in the original source control system. +fast-import will simply ignore this directive, but filter processes +which operate on and modify the stream before feeding to fast-import +may have uses for this information + +.... + 'original-oid' SP <object-identifier> LF +.... + +where `<object-identifier>` is any string not containing LF. + +`tag` +~~~~~ +Creates an annotated tag referring to a specific commit. To create +lightweight (non-annotated) tags see the `reset` command below. + +.... + 'tag' SP <name> LF + mark? + 'from' SP <commit-ish> LF + original-oid? + 'tagger' (SP <name>)? SP LT <email> GT SP <when> LF + data +.... + +where `<name>` is the name of the tag to create. + +Tag names are automatically prefixed with `refs/tags/` when stored +in Git, so importing the CVS branch symbol `RELENG-1_0-FINAL` would +use just `RELENG-1_0-FINAL` for `<name>`, and fast-import will write the +corresponding ref as `refs/tags/RELENG-1_0-FINAL`. + +The value of `<name>` must be a valid refname in Git and therefore +may contain forward slashes. As `LF` is not valid in a Git refname, +no quoting or escaping syntax is supported here. + +The `from` command is the same as in the `commit` command; see +above for details. + +The `tagger` command uses the same format as `committer` within +`commit`; again see above for details. + +The `data` command following `tagger` must supply the annotated tag +message (see below for `data` command syntax). To import an empty +tag message use a 0 length data. Tag messages are free-form and are +not interpreted by Git. Currently they must be encoded in UTF-8, +as fast-import does not permit other encodings to be specified. + +Signing annotated tags during import from within fast-import is not +supported. Trying to include your own PGP/GPG signature is not +recommended, as the frontend does not (easily) have access to the +complete set of bytes which normally goes into such a signature. +If signing is required, create lightweight tags from within fast-import with +`reset`, then create the annotated versions of those tags offline +with the standard 'git tag' process. + +`reset` +~~~~~~~ +Creates (or recreates) the named branch, optionally starting from +a specific revision. The reset command allows a frontend to issue +a new `from` command for an existing branch, or to create a new +branch from an existing commit without creating a new commit. + +.... + 'reset' SP <ref> LF + ('from' SP <commit-ish> LF)? + LF? +.... + +For a detailed description of `<ref>` and `<commit-ish>` see above +under `commit` and `from`. + +The `LF` after the command is optional (it used to be required). + +The `reset` command can also be used to create lightweight +(non-annotated) tags. For example: + +==== + reset refs/tags/938 + from :938 +==== + +would create the lightweight tag `refs/tags/938` referring to +whatever commit mark `:938` references. + +`blob` +~~~~~~ +Requests writing one file revision to the packfile. The revision +is not connected to any commit; this connection must be formed in +a subsequent `commit` command by referencing the blob through an +assigned mark. + +.... + 'blob' LF + mark? + original-oid? + data +.... + +The mark command is optional here as some frontends have chosen +to generate the Git SHA-1 for the blob on their own, and feed that +directly to `commit`. This is typically more work than it's worth +however, as marks are inexpensive to store and easy to use. + +`data` +~~~~~~ +Supplies raw data (for use as blob/file content, commit messages, or +annotated tag messages) to fast-import. Data can be supplied using an exact +byte count or delimited with a terminating line. Real frontends +intended for production-quality conversions should always use the +exact byte count format, as it is more robust and performs better. +The delimited format is intended primarily for testing fast-import. + +Comment lines appearing within the `<raw>` part of `data` commands +are always taken to be part of the body of the data and are therefore +never ignored by fast-import. This makes it safe to import any +file/message content whose lines might start with `#`. + +Exact byte count format:: + The frontend must specify the number of bytes of data. ++ +.... + 'data' SP <count> LF + <raw> LF? +.... ++ +where `<count>` is the exact number of bytes appearing within +`<raw>`. The value of `<count>` is expressed as an ASCII decimal +integer. The `LF` on either side of `<raw>` is not +included in `<count>` and will not be included in the imported data. ++ +The `LF` after `<raw>` is optional (it used to be required) but +recommended. Always including it makes debugging a fast-import +stream easier as the next command always starts in column 0 +of the next line, even if `<raw>` did not end with an `LF`. + +Delimited format:: + A delimiter string is used to mark the end of the data. + fast-import will compute the length by searching for the delimiter. + This format is primarily useful for testing and is not + recommended for real data. ++ +.... + 'data' SP '<<' <delim> LF + <raw> LF + <delim> LF + LF? +.... ++ +where `<delim>` is the chosen delimiter string. The string `<delim>` +must not appear on a line by itself within `<raw>`, as otherwise +fast-import will think the data ends earlier than it really does. The `LF` +immediately trailing `<raw>` is part of `<raw>`. This is one of +the limitations of the delimited format, it is impossible to supply +a data chunk which does not have an LF as its last byte. ++ +The `LF` after `<delim> LF` is optional (it used to be required). + +`alias` +~~~~~~~ +Record that a mark refers to a given object without first creating any +new object. + +.... + 'alias' LF + mark + 'to' SP <commit-ish> LF + LF? +.... + +For a detailed description of `<commit-ish>` see above under `from`. + + +`checkpoint` +~~~~~~~~~~~~ +Forces fast-import to close the current packfile, start a new one, and to +save out all current branch refs, tags and marks. + +.... + 'checkpoint' LF + LF? +.... + +Note that fast-import automatically switches packfiles when the current +packfile reaches --max-pack-size, or 4 GiB, whichever limit is +smaller. During an automatic packfile switch fast-import does not update +the branch refs, tags or marks. + +As a `checkpoint` can require a significant amount of CPU time and +disk IO (to compute the overall pack SHA-1 checksum, generate the +corresponding index file, and update the refs) it can easily take +several minutes for a single `checkpoint` command to complete. + +Frontends may choose to issue checkpoints during extremely large +and long running imports, or when they need to allow another Git +process access to a branch. However given that a 30 GiB Subversion +repository can be loaded into Git through fast-import in about 3 hours, +explicit checkpointing may not be necessary. + +The `LF` after the command is optional (it used to be required). + +`progress` +~~~~~~~~~~ +Causes fast-import to print the entire `progress` line unmodified to +its standard output channel (file descriptor 1) when the command is +processed from the input stream. The command otherwise has no impact +on the current import, or on any of fast-import's internal state. + +.... + 'progress' SP <any> LF + LF? +.... + +The `<any>` part of the command may contain any sequence of bytes +that does not contain `LF`. The `LF` after the command is optional. +Callers may wish to process the output through a tool such as sed to +remove the leading part of the line, for example: + +==== + frontend | git fast-import | sed 's/^progress //' +==== + +Placing a `progress` command immediately after a `checkpoint` will +inform the reader when the `checkpoint` has been completed and it +can safely access the refs that fast-import updated. + +`get-mark` +~~~~~~~~~~ +Causes fast-import to print the SHA-1 corresponding to a mark to +stdout or to the file descriptor previously arranged with the +`--cat-blob-fd` argument. The command otherwise has no impact on the +current import; its purpose is to retrieve SHA-1s that later commits +might want to refer to in their commit messages. + +.... + 'get-mark' SP ':' <idnum> LF +.... + +See ``Responses To Commands'' below for details about how to read +this output safely. + +`cat-blob` +~~~~~~~~~~ +Causes fast-import to print a blob to a file descriptor previously +arranged with the `--cat-blob-fd` argument. The command otherwise +has no impact on the current import; its main purpose is to +retrieve blobs that may be in fast-import's memory but not +accessible from the target repository. + +.... + 'cat-blob' SP <dataref> LF +.... + +The `<dataref>` can be either a mark reference (`:<idnum>`) +set previously or a full 40-byte SHA-1 of a Git blob, preexisting or +ready to be written. + +Output uses the same format as `git cat-file --batch`: + +==== + <sha1> SP 'blob' SP <size> LF + <contents> LF +==== + +This command can be used where a `filemodify` directive can appear, +allowing it to be used in the middle of a commit. For a `filemodify` +using an inline directive, it can also appear right before the `data` +directive. + +See ``Responses To Commands'' below for details about how to read +this output safely. + +`ls` +~~~~ +Prints information about the object at a path to a file descriptor +previously arranged with the `--cat-blob-fd` argument. This allows +printing a blob from the active commit (with `cat-blob`) or copying a +blob or tree from a previous commit for use in the current one (with +`filemodify`). + +The `ls` command can also be used where a `filemodify` directive can +appear, allowing it to be used in the middle of a commit. + +Reading from the active commit:: + This form can only be used in the middle of a `commit`. + The path names a directory entry within fast-import's + active commit. The path must be quoted in this case. ++ +.... + 'ls' SP <path> LF +.... + +Reading from a named tree:: + The `<dataref>` can be a mark reference (`:<idnum>`) or the + full 40-byte SHA-1 of a Git tag, commit, or tree object, + preexisting or waiting to be written. + The path is relative to the top level of the tree + named by `<dataref>`. ++ +.... + 'ls' SP <dataref> SP <path> LF +.... + +See `filemodify` above for a detailed description of `<path>`. + +Output uses the same format as `git ls-tree <tree> -- <path>`: + +==== + <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF +==== + +The <dataref> represents the blob, tree, or commit object at <path> +and can be used in later 'get-mark', 'cat-blob', 'filemodify', or +'ls' commands. + +If there is no file or subtree at that path, 'git fast-import' will +instead report + +==== + missing SP <path> LF +==== + +See ``Responses To Commands'' below for details about how to read +this output safely. + +`feature` +~~~~~~~~~ +Require that fast-import supports the specified feature, or abort if +it does not. + +.... + 'feature' SP <feature> ('=' <argument>)? LF +.... + +The <feature> part of the command may be any one of the following: + +date-format:: +export-marks:: +relative-marks:: +no-relative-marks:: +force:: + Act as though the corresponding command-line option with + a leading `--` was passed on the command line + (see OPTIONS, above). + +import-marks:: +import-marks-if-exists:: + Like --import-marks except in two respects: first, only one + "feature import-marks" or "feature import-marks-if-exists" + command is allowed per stream; second, an --import-marks= + or --import-marks-if-exists command-line option overrides + any of these "feature" commands in the stream; third, + "feature import-marks-if-exists" like a corresponding + command-line option silently skips a nonexistent file. + +get-mark:: +cat-blob:: +ls:: + Require that the backend support the 'get-mark', 'cat-blob', + or 'ls' command respectively. + Versions of fast-import not supporting the specified command + will exit with a message indicating so. + This lets the import error out early with a clear message, + rather than wasting time on the early part of an import + before the unsupported command is detected. + +notes:: + Require that the backend support the 'notemodify' (N) + subcommand to the 'commit' command. + Versions of fast-import not supporting notes will exit + with a message indicating so. + +done:: + Error out if the stream ends without a 'done' command. + Without this feature, errors causing the frontend to end + abruptly at a convenient point in the stream can go + undetected. This may occur, for example, if an import + front end dies in mid-operation without emitting SIGTERM + or SIGKILL at its subordinate git fast-import instance. + +`option` +~~~~~~~~ +Processes the specified option so that git fast-import behaves in a +way that suits the frontend's needs. +Note that options specified by the frontend are overridden by any +options the user may specify to git fast-import itself. + +.... + 'option' SP <option> LF +.... + +The `<option>` part of the command may contain any of the options +listed in the OPTIONS section that do not change import semantics, +without the leading `--` and is treated in the same way. + +Option commands must be the first commands on the input (not counting +feature commands), to give an option command after any non-option +command is an error. + +The following command-line options change import semantics and may therefore +not be passed as option: + +* date-format +* import-marks +* export-marks +* cat-blob-fd +* force + +`done` +~~~~~~ +If the `done` feature is not in use, treated as if EOF was read. +This can be used to tell fast-import to finish early. + +If the `--done` command-line option or `feature done` command is +in use, the `done` command is mandatory and marks the end of the +stream. + +RESPONSES TO COMMANDS +--------------------- +New objects written by fast-import are not available immediately. +Most fast-import commands have no visible effect until the next +checkpoint (or completion). The frontend can send commands to +fill fast-import's input pipe without worrying about how quickly +they will take effect, which improves performance by simplifying +scheduling. + +For some frontends, though, it is useful to be able to read back +data from the current repository as it is being updated (for +example when the source material describes objects in terms of +patches to be applied to previously imported objects). This can +be accomplished by connecting the frontend and fast-import via +bidirectional pipes: + +==== + mkfifo fast-import-output + frontend <fast-import-output | + git fast-import >fast-import-output +==== + +A frontend set up this way can use `progress`, `get-mark`, `ls`, and +`cat-blob` commands to read information from the import in progress. + +To avoid deadlock, such frontends must completely consume any +pending output from `progress`, `ls`, `get-mark`, and `cat-blob` before +performing writes to fast-import that might block. + +CRASH REPORTS +------------- +If fast-import is supplied invalid input it will terminate with a +non-zero exit status and create a crash report in the top level of +the Git repository it was importing into. Crash reports contain +a snapshot of the internal fast-import state as well as the most +recent commands that lead up to the crash. + +All recent commands (including stream comments, file changes and +progress commands) are shown in the command history within the crash +report, but raw file data and commit messages are excluded from the +crash report. This exclusion saves space within the report file +and reduces the amount of buffering that fast-import must perform +during execution. + +After writing a crash report fast-import will close the current +packfile and export the marks table. This allows the frontend +developer to inspect the repository state and resume the import from +the point where it crashed. The modified branches and tags are not +updated during a crash, as the import did not complete successfully. +Branch and tag information can be found in the crash report and +must be applied manually if the update is needed. + +An example crash: + +==== + $ cat >in <<END_OF_INPUT + # my very first test commit + commit refs/heads/master + committer Shawn O. Pearce <spearce> 19283 -0400 + # who is that guy anyway? + data <<EOF + this is my commit + EOF + M 644 inline .gitignore + data <<EOF + .gitignore + EOF + M 777 inline bob + END_OF_INPUT + + $ git fast-import <in + fatal: Corrupt mode: M 777 inline bob + fast-import: dumping crash report to .git/fast_import_crash_8434 + + $ cat .git/fast_import_crash_8434 + fast-import crash report: + fast-import process: 8434 + parent process : 1391 + at Sat Sep 1 00:58:12 2007 + + fatal: Corrupt mode: M 777 inline bob + + Most Recent Commands Before Crash + --------------------------------- + # my very first test commit + commit refs/heads/master + committer Shawn O. Pearce <spearce> 19283 -0400 + # who is that guy anyway? + data <<EOF + M 644 inline .gitignore + data <<EOF + * M 777 inline bob + + Active Branch LRU + ----------------- + active_branches = 1 cur, 5 max + + pos clock name + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + 1) 0 refs/heads/master + + Inactive Branches + ----------------- + refs/heads/master: + status : active loaded dirty + tip commit : 0000000000000000000000000000000000000000 + old tree : 0000000000000000000000000000000000000000 + cur tree : 0000000000000000000000000000000000000000 + commit clock: 0 + last pack : + + + ------------------- + END OF CRASH REPORT +==== + +TIPS AND TRICKS +--------------- +The following tips and tricks have been collected from various +users of fast-import, and are offered here as suggestions. + +Use One Mark Per Commit +~~~~~~~~~~~~~~~~~~~~~~~ +When doing a repository conversion, use a unique mark per commit +(`mark :<n>`) and supply the --export-marks option on the command +line. fast-import will dump a file which lists every mark and the Git +object SHA-1 that corresponds to it. If the frontend can tie +the marks back to the source repository, it is easy to verify the +accuracy and completeness of the import by comparing each Git +commit to the corresponding source revision. + +Coming from a system such as Perforce or Subversion, this should be +quite simple, as the fast-import mark can also be the Perforce changeset +number or the Subversion revision number. + +Freely Skip Around Branches +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Don't bother trying to optimize the frontend to stick to one branch +at a time during an import. Although doing so might be slightly +faster for fast-import, it tends to increase the complexity of the frontend +code considerably. + +The branch LRU builtin to fast-import tends to behave very well, and the +cost of activating an inactive branch is so low that bouncing around +between branches has virtually no impact on import performance. + +Handling Renames +~~~~~~~~~~~~~~~~ +When importing a renamed file or directory, simply delete the old +name(s) and modify the new name(s) during the corresponding commit. +Git performs rename detection after-the-fact, rather than explicitly +during a commit. + +Use Tag Fixup Branches +~~~~~~~~~~~~~~~~~~~~~~ +Some other SCM systems let the user create a tag from multiple +files which are not from the same commit/changeset. Or to create +tags which are a subset of the files available in the repository. + +Importing these tags as-is in Git is impossible without making at +least one commit which ``fixes up'' the files to match the content +of the tag. Use fast-import's `reset` command to reset a dummy branch +outside of your normal branch space to the base commit for the tag, +then commit one or more file fixup commits, and finally tag the +dummy branch. + +For example since all normal branches are stored under `refs/heads/` +name the tag fixup branch `TAG_FIXUP`. This way it is impossible for +the fixup branch used by the importer to have namespace conflicts +with real branches imported from the source (the name `TAG_FIXUP` +is not `refs/heads/TAG_FIXUP`). + +When committing fixups, consider using `merge` to connect the +commit(s) which are supplying file revisions to the fixup branch. +Doing so will allow tools such as 'git blame' to track +through the real commit history and properly annotate the source +files. + +After fast-import terminates the frontend will need to do `rm .git/TAG_FIXUP` +to remove the dummy branch. + +Import Now, Repack Later +~~~~~~~~~~~~~~~~~~~~~~~~ +As soon as fast-import completes the Git repository is completely valid +and ready for use. Typically this takes only a very short time, +even for considerably large projects (100,000+ commits). + +However repacking the repository is necessary to improve data +locality and access performance. It can also take hours on extremely +large projects (especially if -f and a large --window parameter is +used). Since repacking is safe to run alongside readers and writers, +run the repack in the background and let it finish when it finishes. +There is no reason to wait to explore your new Git project! + +If you choose to wait for the repack, don't try to run benchmarks +or performance tests until repacking is completed. fast-import outputs +suboptimal packfiles that are simply never seen in real use +situations. + +Repacking Historical Data +~~~~~~~~~~~~~~~~~~~~~~~~~ +If you are repacking very old imported data (e.g. older than the +last year), consider expending some extra CPU time and supplying +--window=50 (or higher) when you run 'git repack'. +This will take longer, but will also produce a smaller packfile. +You only need to expend the effort once, and everyone using your +project will benefit from the smaller repository. + +Include Some Progress Messages +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Every once in a while have your frontend emit a `progress` message +to fast-import. The contents of the messages are entirely free-form, +so one suggestion would be to output the current month and year +each time the current commit date moves into the next month. +Your users will feel better knowing how much of the data stream +has been processed. + + +PACKFILE OPTIMIZATION +--------------------- +When packing a blob fast-import always attempts to deltify against the last +blob written. Unless specifically arranged for by the frontend, +this will probably not be a prior version of the same file, so the +generated delta will not be the smallest possible. The resulting +packfile will be compressed, but will not be optimal. + +Frontends which have efficient access to all revisions of a +single file (for example reading an RCS/CVS ,v file) can choose +to supply all revisions of that file as a sequence of consecutive +`blob` commands. This allows fast-import to deltify the different file +revisions against each other, saving space in the final packfile. +Marks can be used to later identify individual file revisions during +a sequence of `commit` commands. + +The packfile(s) created by fast-import do not encourage good disk access +patterns. This is caused by fast-import writing the data in the order +it is received on standard input, while Git typically organizes +data within packfiles to make the most recent (current tip) data +appear before historical data. Git also clusters commits together, +speeding up revision traversal through better cache locality. + +For this reason it is strongly recommended that users repack the +repository with `git repack -a -d` after fast-import completes, allowing +Git to reorganize the packfiles for faster data access. If blob +deltas are suboptimal (see above) then also adding the `-f` option +to force recomputation of all deltas can significantly reduce the +final packfile size (30-50% smaller can be quite typical). + +Instead of running `git repack` you can also run `git gc +--aggressive`, which will also optimize other things after an import +(e.g. pack loose refs). As noted in the "AGGRESSIVE" section in +linkgit:git-gc[1] the `--aggressive` option will find new deltas with +the `-f` option to linkgit:git-repack[1]. For the reasons elaborated +on above using `--aggressive` after a fast-import is one of the few +cases where it's known to be worthwhile. + +MEMORY UTILIZATION +------------------ +There are a number of factors which affect how much memory fast-import +requires to perform an import. Like critical sections of core +Git, fast-import uses its own memory allocators to amortize any overheads +associated with malloc. In practice fast-import tends to amortize any +malloc overheads to 0, due to its use of large block allocations. + +per object +~~~~~~~~~~ +fast-import maintains an in-memory structure for every object written in +this execution. On a 32 bit system the structure is 32 bytes, +on a 64 bit system the structure is 40 bytes (due to the larger +pointer sizes). Objects in the table are not deallocated until +fast-import terminates. Importing 2 million objects on a 32 bit system +will require approximately 64 MiB of memory. + +The object table is actually a hashtable keyed on the object name +(the unique SHA-1). This storage configuration allows fast-import to reuse +an existing or already written object and avoid writing duplicates +to the output packfile. Duplicate blobs are surprisingly common +in an import, typically due to branch merges in the source. + +per mark +~~~~~~~~ +Marks are stored in a sparse array, using 1 pointer (4 bytes or 8 +bytes, depending on pointer size) per mark. Although the array +is sparse, frontends are still strongly encouraged to use marks +between 1 and n, where n is the total number of marks required for +this import. + +per branch +~~~~~~~~~~ +Branches are classified as active and inactive. The memory usage +of the two classes is significantly different. + +Inactive branches are stored in a structure which uses 96 or 120 +bytes (32 bit or 64 bit systems, respectively), plus the length of +the branch name (typically under 200 bytes), per branch. fast-import will +easily handle as many as 10,000 inactive branches in under 2 MiB +of memory. + +Active branches have the same overhead as inactive branches, but +also contain copies of every tree that has been recently modified on +that branch. If subtree `include` has not been modified since the +branch became active, its contents will not be loaded into memory, +but if subtree `src` has been modified by a commit since the branch +became active, then its contents will be loaded in memory. + +As active branches store metadata about the files contained on that +branch, their in-memory storage size can grow to a considerable size +(see below). + +fast-import automatically moves active branches to inactive status based on +a simple least-recently-used algorithm. The LRU chain is updated on +each `commit` command. The maximum number of active branches can be +increased or decreased on the command line with --active-branches=. + +per active tree +~~~~~~~~~~~~~~~ +Trees (aka directories) use just 12 bytes of memory on top of the +memory required for their entries (see ``per active file'' below). +The cost of a tree is virtually 0, as its overhead amortizes out +over the individual file entries. + +per active file entry +~~~~~~~~~~~~~~~~~~~~~ +Files (and pointers to subtrees) within active trees require 52 or 64 +bytes (32/64 bit platforms) per entry. To conserve space, file and +tree names are pooled in a common string table, allowing the filename +``Makefile'' to use just 16 bytes (after including the string header +overhead) no matter how many times it occurs within the project. + +The active branch LRU, when coupled with the filename string pool +and lazy loading of subtrees, allows fast-import to efficiently import +projects with 2,000+ branches and 45,114+ files in a very limited +memory footprint (less than 2.7 MiB per active branch). + +SIGNALS +------- +Sending *SIGUSR1* to the 'git fast-import' process ends the current +packfile early, simulating a `checkpoint` command. The impatient +operator can use this facility to peek at the objects and refs from an +import in progress, at the cost of some added running time and worse +compression. + +CONFIGURATION +------------- + +include::includes/cmd-config-section-all.txt[] + +include::config/fastimport.txt[] + +SEE ALSO +-------- +linkgit:git-fast-export[1] + +GIT +--- +Part of the linkgit:git[1] suite |