diff options
Diffstat (limited to 'doc/gpg.texi')
| -rw-r--r-- | doc/gpg.texi | 4436 |
1 files changed, 4436 insertions, 0 deletions
diff --git a/doc/gpg.texi b/doc/gpg.texi new file mode 100644 index 0000000..39c996b --- /dev/null +++ b/doc/gpg.texi @@ -0,0 +1,4436 @@ +@c Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, +@c 2008, 2009, 2010 Free Software Foundation, Inc. +@c This is part of the GnuPG manual. +@c For copying conditions, see the file gnupg.texi. + +@include defs.inc + +@node Invoking GPG +@chapter Invoking GPG +@cindex GPG command options +@cindex command options +@cindex options, GPG command + + +@c Begin standard stuff +@ifclear gpgtwohack +@manpage gpg.1 +@ifset manverb +.B gpg +\- OpenPGP encryption and signing tool +@end ifset + +@mansect synopsis +@ifset manverb +.B gpg +.RB [ \-\-homedir +.IR dir ] +.RB [ \-\-options +.IR file ] +.RI [ options ] +.I command +.RI [ args ] +@end ifset +@end ifclear +@c End standard stuff + +@c Begin gpg2 hack stuff +@ifset gpgtwohack +@manpage gpg2.1 +@ifset manverb +.B gpg2 +\- OpenPGP encryption and signing tool +@end ifset + +@mansect synopsis +@ifset manverb +.B gpg2 +.RB [ \-\-homedir +.IR dir ] +.RB [ \-\-options +.IR file ] +.RI [ options ] +.I command +.RI [ args ] +@end ifset +@end ifset +@c End gpg2 hack stuff + + +@mansect description +@command{@gpgname} is the OpenPGP part of the GNU Privacy Guard (GnuPG). It +is a tool to provide digital encryption and signing services using the +OpenPGP standard. @command{@gpgname} features complete key management and +all the bells and whistles you would expect from a full OpenPGP +implementation. + +There are two main versions of GnuPG: GnuPG 1.x and GnuPG 2.x. GnuPG +2.x supports modern encryption algorithms and thus should be preferred +over GnuPG 1.x. You only need to use GnuPG 1.x if your platform +doesn't support GnuPG 2.x, or you need support for some features that +GnuPG 2.x has deprecated, e.g., decrypting data created with PGP-2 +keys. + +@ifclear gpgtwohack +If you are looking for version 1 of GnuPG, you may find that version +installed under the name @command{gpg1}. +@end ifclear +@ifset gpgtwohack +In contrast to the standalone command @command{gpg} from GnuPG 1.x, +the 2.x version is commonly installed under the name +@command{@gpgname}. +@end ifset + +@manpause + +@xref{Option Index}, for an index to @command{@gpgname}'s commands and options. +@mancont + +@menu +* GPG Commands:: List of all commands. +* GPG Options:: List of all options. +* GPG Configuration:: Configuration files. +* GPG Examples:: Some usage examples. + +Developer information: +* Unattended Usage of GPG:: Using @command{gpg} from other programs. +@end menu + +@c * GPG Protocol:: The protocol the server mode uses. + + +@c ******************************************* +@c *************** **************** +@c *************** COMMANDS **************** +@c *************** **************** +@c ******************************************* +@mansect commands +@node GPG Commands +@section Commands + +Commands are not distinguished from options except for the fact that +only one command is allowed. Generally speaking, irrelevant options +are silently ignored, and may not be checked for correctness. + +@command{@gpgname} may be run with no commands. In this case it will +print a warning perform a reasonable action depending on the type of +file it is given as input (an encrypted message is decrypted, a +signature is verified, a file containing keys is listed, etc.). + +If you run into any problems, please add the option @option{--verbose} +to the invocation to see more diagnostics. + + +@menu +* General GPG Commands:: Commands not specific to the functionality. +* Operational GPG Commands:: Commands to select the type of operation. +* OpenPGP Key Management:: How to manage your keys. +@end menu + + +@c ******************************************* +@c ********** GENERAL COMMANDS ************* +@c ******************************************* +@node General GPG Commands +@subsection Commands not specific to the function + +@table @gnupgtabopt +@item --version +@opindex version +Print the program version and licensing information. Note that you +cannot abbreviate this command. + +@item --help +@itemx -h +@opindex help +Print a usage message summarizing the most useful command-line options. +Note that you cannot arbitrarily abbreviate this command +(though you can use its short form @option{-h}). + +@item --warranty +@opindex warranty +Print warranty information. + +@item --dump-options +@opindex dump-options +Print a list of all available options and commands. Note that you cannot +abbreviate this command. +@end table + + +@c ******************************************* +@c ******** OPERATIONAL COMMANDS *********** +@c ******************************************* +@node Operational GPG Commands +@subsection Commands to select the type of operation + + +@table @gnupgtabopt + +@item --sign +@itemx -s +@opindex sign +Sign a message. This command may be combined with @option{--encrypt} +(to sign and encrypt a message), @option{--symmetric} (to sign and +symmetrically encrypt a message), or both @option{--encrypt} and +@option{--symmetric} (to sign and encrypt a message that can be +decrypted using a secret key or a passphrase). The signing key is +chosen by default or can be set explicitly using the +@option{--local-user} and @option{--default-key} options. + +@item --clear-sign +@opindex clear-sign +@itemx --clearsign +@opindex clearsign +Make a cleartext signature. The content in a cleartext signature is +readable without any special software. OpenPGP software is only needed +to verify the signature. cleartext signatures may modify end-of-line +whitespace for platform independence and are not intended to be +reversible. The signing key is chosen by default or can be set +explicitly using the @option{--local-user} and @option{--default-key} +options. + + +@item --detach-sign +@itemx -b +@opindex detach-sign +Make a detached signature. + +@item --encrypt +@itemx -e +@opindex encrypt +Encrypt data to one or more public keys. This command may be combined +with @option{--sign} (to sign and encrypt a message), +@option{--symmetric} (to encrypt a message that can be decrypted using a +secret key or a passphrase), or @option{--sign} and +@option{--symmetric} together (for a signed message that can be +decrypted using a secret key or a passphrase). @option{--recipient} +and related options specify which public keys to use for encryption. + +@item --symmetric +@itemx -c +@opindex symmetric +Encrypt with a symmetric cipher using a passphrase. The default +symmetric cipher used is @value{GPGSYMENCALGO}, but may be chosen with the +@option{--cipher-algo} option. This command may be combined with +@option{--sign} (for a signed and symmetrically encrypted message), +@option{--encrypt} (for a message that may be decrypted via a secret key +or a passphrase), or @option{--sign} and @option{--encrypt} together +(for a signed message that may be decrypted via a secret key or a +passphrase). @command{@gpgname} caches the passphrase used for +symmetric encryption so that a decrypt operation may not require that +the user needs to enter the passphrase. The option +@option{--no-symkey-cache} can be used to disable this feature. + +@item --store +@opindex store +Store only (make a simple literal data packet). + +@item --decrypt +@itemx -d +@opindex decrypt +Decrypt the file given on the command line (or STDIN if no file +is specified) and write it to STDOUT (or the file specified with +@option{--output}). If the decrypted file is signed, the signature is also +verified. This command differs from the default operation, as it never +writes to the filename which is included in the file and it rejects +files that don't begin with an encrypted message. + +@item --verify +@opindex verify +Assume that the first argument is a signed file and verify it without +generating any output. With no arguments, the signature packet is +read from STDIN. If only one argument is given, the specified file is +expected to include a complete signature. + +With more than one argument, the first argument should specify a file +with a detached signature and the remaining files should contain the +signed data. To read the signed data from STDIN, use @samp{-} as the +second filename. For security reasons, a detached signature will not +read the signed material from STDIN if not explicitly specified. + +Note: If the option @option{--batch} is not used, @command{@gpgname} +may assume that a single argument is a file with a detached signature, +and it will try to find a matching data file by stripping certain +suffixes. Using this historical feature to verify a detached +signature is strongly discouraged; you should always specify the data file +explicitly. + +Note: When verifying a cleartext signature, @command{@gpgname} verifies +only what makes up the cleartext signed data and not any extra data +outside of the cleartext signature or the header lines directly following +the dash marker line. The option @code{--output} may be used to write +out the actual signed data, but there are other pitfalls with this +format as well. It is suggested to avoid cleartext signatures in +favor of detached signatures. + +Note: Sometimes the use of the @command{gpgv} tool is easier than +using the full-fledged @command{gpg} with this option. @command{gpgv} +is designed to compare signed data against a list of trusted keys and +returns with success only for a good signature. It has its own manual +page. + + +@item --multifile +@opindex multifile +This modifies certain other commands to accept multiple files for +processing on the command line or read from STDIN with each filename on +a separate line. This allows for many files to be processed at +once. @option{--multifile} may currently be used along with +@option{--verify}, @option{--encrypt}, and @option{--decrypt}. Note that +@option{--multifile --verify} may not be used with detached signatures. + +@item --verify-files +@opindex verify-files +Identical to @option{--multifile --verify}. + +@item --encrypt-files +@opindex encrypt-files +Identical to @option{--multifile --encrypt}. + +@item --decrypt-files +@opindex decrypt-files +Identical to @option{--multifile --decrypt}. + +@item --list-keys +@itemx -k +@itemx --list-public-keys +@opindex list-keys +List the specified keys. If no keys are specified, then all keys from +the configured public keyrings are listed. + +Never use the output of this command in scripts or other programs. +The output is intended only for humans and its format is likely to +change. The @option{--with-colons} option emits the output in a +stable, machine-parseable format, which is intended for use by scripts +and other programs. + +@item --list-secret-keys +@itemx -K +@opindex list-secret-keys +List the specified secret keys. If no keys are specified, then all +known secret keys are listed. A @code{#} after the initial tags +@code{sec} or @code{ssb} means that the secret key or subkey is +currently not usable. We also say that this key has been taken +offline (for example, a primary key can be taken offline by exporting +the key using the command @option{--export-secret-subkeys}). A +@code{>} after these tags indicate that the key is stored on a +smartcard. See also @option{--list-keys}. + +@item --check-signatures +@opindex check-signatures +@itemx --check-sigs +@opindex check-sigs +Same as @option{--list-keys}, but the key signatures are verified and +listed too. Note that for performance reasons the revocation status +of a signing key is not shown. This command has the same effect as +using @option{--list-keys} with @option{--with-sig-check}. + +The status of the verification is indicated by a flag directly +following the "sig" tag (and thus before the flags described below. A +"!" indicates that the signature has been successfully verified, a "-" +denotes a bad signature and a "%" is used if an error occurred while +checking the signature (e.g. a non supported algorithm). Signatures +where the public key is not available are not listed; to see their +keyids the command @option{--list-sigs} can be used. + +For each signature listed, there are several flags in between the +signature status flag and keyid. These flags give additional +information about each key signature. From left to right, they are +the numbers 1-3 for certificate check level (see +@option{--ask-cert-level}), "L" for a local or non-exportable +signature (see @option{--lsign-key}), "R" for a nonRevocable signature +(see the @option{--edit-key} command "nrsign"), "P" for a signature +that contains a policy URL (see @option{--cert-policy-url}), "N" for a +signature that contains a notation (see @option{--cert-notation}), "X" +for an eXpired signature (see @option{--ask-cert-expire}), and the +numbers 1-9 or "T" for 10 and above to indicate trust signature levels +(see the @option{--edit-key} command "tsign"). + + +@item --locate-keys +@itemx --locate-external-keys +@opindex locate-keys +@opindex locate-external-keys +Locate the keys given as arguments. This command basically uses the +same algorithm as used when locating keys for encryption and may thus +be used to see what keys @command{@gpgname} might use. In particular +external methods as defined by @option{--auto-key-locate} are used to +locate a key if the arguments comain valid mail addresses. Only +public keys are listed. + +The variant @option{--locate-external-keys} does not consider a +locally existing key and can thus be used to force the refresh of a +key via the defined external methods. If a fingerprint is given and +and the methods defined by --auto-key-locate define LDAP servers, the +key is fetched from these resources; defined non-LDAP keyservers are +skipped. + +@item --show-keys +@opindex show-keys +This commands takes OpenPGP keys as input and prints information about +them in the same way the command @option{--list-keys} does for locally +stored key. In addition the list options @code{show-unusable-uids}, +@code{show-unusable-subkeys}, @code{show-notations} and +@code{show-policy-urls} are also enabled. As usual for automated +processing, this command should be combined with the option +@option{--with-colons}. + +@item --fingerprint +@opindex fingerprint +List all keys (or the specified ones) along with their +fingerprints. This is the same output as @option{--list-keys} but with +the additional output of a line with the fingerprint. May also be +combined with @option{--check-signatures}. If this +command is given twice, the fingerprints of all secondary keys are +listed too. This command also forces pretty printing of fingerprints +if the keyid format has been set to "none". + +@item --list-packets +@opindex list-packets +List only the sequence of packets. This command is only useful for +debugging. When used with option @option{--verbose} the actual MPI +values are dumped and not only their lengths. Note that the output of +this command may change with new releases. + + +@item --edit-card +@opindex edit-card +@itemx --card-edit +@opindex card-edit +Present a menu to work with a smartcard. The subcommand "help" provides +an overview on available commands. For a detailed description, please +see the Card HOWTO at +https://gnupg.org/documentation/howtos.html#GnuPG-cardHOWTO . + +@item --card-status +@opindex card-status +Show the content of the smart card. + +@item --change-pin +@opindex change-pin +Present a menu to allow changing the PIN of a smartcard. This +functionality is also available as the subcommand "passwd" with the +@option{--edit-card} command. + +@item --delete-keys @var{name} +@opindex delete-keys +Remove key from the public keyring. In batch mode either @option{--yes} is +required or the key must be specified by fingerprint. This is a +safeguard against accidental deletion of multiple keys. If the +exclamation mark syntax is used with the fingerprint of a subkey only +that subkey is deleted; if the exclamation mark is used with the +fingerprint of the primary key the entire public key is deleted. + +@item --delete-secret-keys @var{name} +@opindex delete-secret-keys +Remove key from the secret keyring. In batch mode the key must be +specified by fingerprint. The option @option{--yes} can be used to +advise gpg-agent not to request a confirmation. This extra +pre-caution is done because @command{@gpgname} can't be sure that the +secret key (as controlled by gpg-agent) is only used for the given +OpenPGP public key. If the exclamation mark syntax is used with the +fingerprint of a subkey only the secret part of that subkey is +deleted; if the exclamation mark is used with the fingerprint of the +primary key only the secret part of the primary key is deleted. + + +@item --delete-secret-and-public-key @var{name} +@opindex delete-secret-and-public-key +Same as @option{--delete-key}, but if a secret key exists, it will be +removed first. In batch mode the key must be specified by fingerprint. +The option @option{--yes} can be used to advise gpg-agent not to +request a confirmation. + +@item --export +@opindex export +Either export all keys from all keyrings (default keyring and those +registered via option @option{--keyring}), or if at least one name is given, +those of the given name. The exported keys are written to STDOUT or to the +file given with option @option{--output}. Use together with +@option{--armor} to mail those keys. + +@item --send-keys @var{keyIDs} +@opindex send-keys +Similar to @option{--export} but sends the keys to a keyserver. +Fingerprints may be used instead of key IDs. +Don't send your complete keyring to a keyserver --- select +only those keys which are new or changed by you. If no @var{keyIDs} +are given, @command{@gpgname} does nothing. + +Take care: Keyservers are by design write only systems and thus it is +not possible to ever delete keys once they have been send to a +keyserver. + + +@item --export-secret-keys +@itemx --export-secret-subkeys +@opindex export-secret-keys +@opindex export-secret-subkeys +Same as @option{--export}, but exports the secret keys instead. The +exported keys are written to STDOUT or to the file given with option +@option{--output}. This command is often used along with the option +@option{--armor} to allow for easy printing of the key for paper backup; +however the external tool @command{paperkey} does a better job of +creating backups on paper. Note that exporting a secret key can be a +security risk if the exported keys are sent over an insecure channel. + +The second form of the command has the special property to render the +secret part of the primary key useless; this is a GNU extension to +OpenPGP and other implementations can not be expected to successfully +import such a key. Its intended use is in generating a full key with +an additional signing subkey on a dedicated machine. This command +then exports the key without the primary key to the main machine. + +GnuPG may ask you to enter the passphrase for the key. This is +required, because the internal protection method of the secret key is +different from the one specified by the OpenPGP protocol. + +@item --export-ssh-key +@opindex export-ssh-key +This command is used to export a key in the OpenSSH public key format. +It requires the specification of one key by the usual means and +exports the latest valid subkey which has an authentication capability +to STDOUT or to the file given with option @option{--output}. That +output can directly be added to ssh's @file{authorized_key} file. + +By specifying the key to export using a key ID or a fingerprint +suffixed with an exclamation mark (!), a specific subkey or the +primary key can be exported. This does not even require that the key +has the authentication capability flag set. + +@item --import +@itemx --fast-import +@opindex import +Import/merge keys. This adds the given keys to the +keyring. The fast version is currently just a synonym. + +There are a few other options which control how this command works. +Most notable here is the @option{--import-options merge-only} option +which does not insert new keys but does only the merging of new +signatures, user-IDs and subkeys. + +@item --receive-keys @var{keyIDs} +@opindex receive-keys +@itemx --recv-keys @var{keyIDs} +@opindex recv-keys +Import the keys with the given @var{keyIDs} from a keyserver. + +@item --refresh-keys +@opindex refresh-keys +Request updates from a keyserver for keys that already exist on the +local keyring. This is useful for updating a key with the latest +signatures, user IDs, etc. Calling this with no arguments will refresh +the entire keyring. + +@item --search-keys @var{names} +@opindex search-keys +Search the keyserver for the given @var{names}. Multiple names given +here will be joined together to create the search string for the +keyserver. Note that keyservers search for @var{names} in a different +and simpler way than gpg does. The best choice is to use a mail +address. Due to data privacy reasons keyservers may even not even +allow searching by user id or mail address and thus may only return +results when being used with the @option{--recv-key} command to +search by key fingerprint or keyid. + +@item --fetch-keys @var{URIs} +@opindex fetch-keys +Retrieve keys located at the specified @var{URIs}. Note that different +installations of GnuPG may support different protocols (HTTP, FTP, +LDAP, etc.). When using HTTPS the system provided root certificates +are used by this command. + +@item --update-trustdb +@opindex update-trustdb +Do trust database maintenance. This command iterates over all keys and +builds the Web of Trust. This is an interactive command because it may +have to ask for the "ownertrust" values for keys. The user has to give +an estimation of how far she trusts the owner of the displayed key to +correctly certify (sign) other keys. GnuPG only asks for the ownertrust +value if it has not yet been assigned to a key. Using the +@option{--edit-key} menu, the assigned value can be changed at any time. + +@item --check-trustdb +@opindex check-trustdb +Do trust database maintenance without user interaction. From time to +time the trust database must be updated so that expired keys or +signatures and the resulting changes in the Web of Trust can be +tracked. Normally, GnuPG will calculate when this is required and do it +automatically unless @option{--no-auto-check-trustdb} is set. This +command can be used to force a trust database check at any time. The +processing is identical to that of @option{--update-trustdb} but it +skips keys with a not yet defined "ownertrust". + +For use with cron jobs, this command can be used together with +@option{--batch} in which case the trust database check is done only if +a check is needed. To force a run even in batch mode add the option +@option{--yes}. + +@anchor{option --export-ownertrust} +@item --export-ownertrust +@opindex export-ownertrust +Send the ownertrust values to STDOUT. This is useful for backup purposes +as these values are the only ones which can't be re-created from a +corrupted trustdb. Example: +@c man:.RS +@example + @gpgname{} --export-ownertrust > otrust.txt +@end example +@c man:.RE + + +@item --import-ownertrust +@opindex import-ownertrust +Update the trustdb with the ownertrust values stored in @code{files} (or +STDIN if not given); existing values will be overwritten. In case of a +severely damaged trustdb and if you have a recent backup of the +ownertrust values (e.g. in the file @file{otrust.txt}), you may re-create +the trustdb using these commands: +@c man:.RS +@example + cd ~/.gnupg + rm trustdb.gpg + @gpgname{} --import-ownertrust < otrust.txt +@end example +@c man:.RE + + +@item --rebuild-keydb-caches +@opindex rebuild-keydb-caches +When updating from version 1.0.6 to 1.0.7 this command should be used +to create signature caches in the keyring. It might be handy in other +situations too. + +@item --print-md @var{algo} +@itemx --print-mds +@opindex print-md +Print message digest of algorithm @var{algo} for all given files or STDIN. +With the second form (or a deprecated "*" for @var{algo}) digests for all +available algorithms are printed. + +@item --gen-random @var{0|1|2} @var{count} +@opindex gen-random +Emit @var{count} random bytes of the given quality level 0, 1 or 2. If +@var{count} is not given or zero, an endless sequence of random bytes +will be emitted. If used with @option{--armor} the output will be +base64 encoded. PLEASE, don't use this command unless you know what +you are doing; it may remove precious entropy from the system! + +@item --gen-prime @var{mode} @var{bits} +@opindex gen-prime +Use the source, Luke :-). The output format is subject to change +with ant release. + + +@item --enarmor +@itemx --dearmor +@opindex enarmor +@opindex dearmor +Pack or unpack an arbitrary input into/from an OpenPGP ASCII armor. +This is a GnuPG extension to OpenPGP and in general not very useful. + +@item --tofu-policy @{auto|good|unknown|bad|ask@} @var{keys} +@opindex tofu-policy +Set the TOFU policy for all the bindings associated with the specified +@var{keys}. For more information about the meaning of the policies, +@pxref{trust-model-tofu}. The @var{keys} may be specified either by their +fingerprint (preferred) or their keyid. + +@c @item --server +@c @opindex server +@c Run gpg in server mode. This feature is not yet ready for use and +@c thus not documented. + +@end table + + +@c ******************************************* +@c ******* KEY MANGEMENT COMMANDS ********** +@c ******************************************* +@node OpenPGP Key Management +@subsection How to manage your keys + +This section explains the main commands for key management. + +@table @gnupgtabopt + +@item --quick-generate-key @var{user-id} [@var{algo} [@var{usage} [@var{expire}]]] +@itemx --quick-gen-key +@opindex quick-generate-key +@opindex quick-gen-key +This is a simple command to generate a standard key with one user id. +In contrast to @option{--generate-key} the key is generated directly +without the need to answer a bunch of prompts. Unless the option +@option{--yes} is given, the key creation will be canceled if the +given user id already exists in the keyring. + +If invoked directly on the console without any special options an +answer to a ``Continue?'' style confirmation prompt is required. In +case the user id already exists in the keyring a second prompt to +force the creation of the key will show up. + +If @var{algo} or @var{usage} are given, only the primary key is +created and no prompts are shown. To specify an expiration date but +still create a primary and subkey use ``default'' or +``future-default'' for @var{algo} and ``default'' for @var{usage}. +For a description of these optional arguments see the command +@code{--quick-add-key}. The @var{usage} accepts also the value +``cert'' which can be used to create a certification only primary key; +the default is to a create certification and signing key. + +The @var{expire} argument can be used to specify an expiration date +for the key. Several formats are supported; commonly the ISO formats +``YYYY-MM-DD'' or ``YYYYMMDDThhmmss'' are used. To make the key +expire in N seconds, N days, N weeks, N months, or N years use +``seconds=N'', ``Nd'', ``Nw'', ``Nm'', or ``Ny'' respectively. Not +specifying a value, or using ``-'' results in a key expiring in a +reasonable default interval. The values ``never'', ``none'' can be +used for no expiration date. + +If this command is used with @option{--batch}, +@option{--pinentry-mode} has been set to @code{loopback}, and one of +the passphrase options (@option{--passphrase}, +@option{--passphrase-fd}, or @option{--passphrase-file}) is used, the +supplied passphrase is used for the new key and the agent does not ask +for it. To create a key without any protection @code{--passphrase ''} +may be used. + +To create an OpenPGP key from the keys available on the currently +inserted smartcard, the special string ``card'' can be used for +@var{algo}. If the card features an encryption and a signing key, gpg +will figure them out and creates an OpenPGP key consisting of the +usual primary key and one subkey. This works only with certain +smartcards. Note that the interactive @option{--full-gen-key} command +allows to do the same but with greater flexibility in the selection of +the smartcard keys. + +Note that it is possible to create a primary key and a subkey using +non-default algorithms by using ``default'' and changing the default +parameters using the option @option{--default-new-key-algo}. + +@item --quick-set-expire @var{fpr} @var{expire} [*|@var{subfprs}] +@opindex quick-set-expire +With two arguments given, directly set the expiration time of the +primary key identified by @var{fpr} to @var{expire}. To remove the +expiration time @code{0} can be used. With three arguments and the +third given as an asterisk, the expiration time of all non-revoked and +not yet expired subkeys are set to @var{expire}. With more than two +arguments and a list of fingerprints given for @var{subfprs}, all +non-revoked subkeys matching these fingerprints are set to +@var{expire}. + + +@item --quick-add-key @var{fpr} [@var{algo} [@var{usage} [@var{expire}]]] +@opindex quick-add-key +Directly add a subkey to the key identified by the fingerprint +@var{fpr}. Without the optional arguments an encryption subkey is +added. If any of the arguments are given a more specific subkey is +added. + +@var{algo} may be any of the supported algorithms or curve names +given in the format as used by key listings. To use the default +algorithm the string ``default'' or ``-'' can be used. Supported +algorithms are ``rsa'', ``dsa'', ``elg'', ``ed25519'', ``cv25519'', +and other ECC curves. For example the string ``rsa'' adds an RSA key +with the default key length; a string ``rsa4096'' requests that the +key length is 4096 bits. The string ``future-default'' is an alias +for the algorithm which will likely be used as default algorithm in +future versions of gpg. To list the supported ECC curves the command +@code{gpg --with-colons --list-config curve} can be used. + +Depending on the given @var{algo} the subkey may either be an +encryption subkey or a signing subkey. If an algorithm is capable of +signing and encryption and such a subkey is desired, a @var{usage} +string must be given. This string is either ``default'' or ``-'' to +keep the default or a comma delimited list (or space delimited list) +of keywords: ``sign'' for a signing subkey, ``auth'' for an +authentication subkey, and ``encr'' for an encryption subkey +(``encrypt'' can be used as alias for ``encr''). The valid +combinations depend on the algorithm. + +The @var{expire} argument can be used to specify an expiration date +for the key. Several formats are supported; commonly the ISO formats +``YYYY-MM-DD'' or ``YYYYMMDDThhmmss'' are used. To make the key +expire in N seconds, N days, N weeks, N months, or N years use +``seconds=N'', ``Nd'', ``Nw'', ``Nm'', or ``Ny'' respectively. Not +specifying a value, or using ``-'' results in a key expiring in a +reasonable default interval. The values ``never'', ``none'' can be +used for no expiration date. + +@item --generate-key +@opindex generate-key +@itemx --gen-key +@opindex gen-key +Generate a new key pair using the current default parameters. This is +the standard command to create a new key. In addition to the key a +revocation certificate is created and stored in the +@file{openpgp-revocs.d} directory below the GnuPG home directory. + +@item --full-generate-key +@opindex full-generate-key +@itemx --full-gen-key +@opindex full-gen-key +Generate a new key pair with dialogs for all options. This is an +extended version of @option{--generate-key}. + +There is also a feature which allows you to create keys in batch +mode. See the manual section ``Unattended key generation'' on how +to use this. + + +@item --generate-revocation @var{name} +@opindex generate-revocation +@itemx --gen-revoke @var{name} +@opindex gen-revoke +Generate a revocation certificate for the complete key. To only revoke +a subkey or a key signature, use the @option{--edit} command. + +This command merely creates the revocation certificate so that it can +be used to revoke the key if that is ever needed. To actually revoke +a key the created revocation certificate needs to be merged with the +key to revoke. This is done by importing the revocation certificate +using the @option{--import} command. Then the revoked key needs to be +published, which is best done by sending the key to a keyserver +(command @option{--send-key}) and by exporting (@option{--export}) it +to a file which is then send to frequent communication partners. + + +@item --generate-designated-revocation @var{name} +@opindex generate-designated-revocation +@itemx --desig-revoke @var{name} +@opindex desig-revoke +Generate a designated revocation certificate for a key. This allows a +user (with the permission of the keyholder) to revoke someone else's +key. + + +@item --edit-key +@opindex edit-key +Present a menu which enables you to do most of the key management +related tasks. It expects the specification of a key on the command +line. + +@c ******** Begin Edit-key Options ********** +@table @asis + + @item uid @var{n} + @opindex keyedit:uid + Toggle selection of user ID or photographic user ID with index @var{n}. + Use @code{*} to select all and @code{0} to deselect all. + + @item key @var{n} + @opindex keyedit:key + Toggle selection of subkey with index @var{n} or key ID @var{n}. + Use @code{*} to select all and @code{0} to deselect all. + + @item sign + @opindex keyedit:sign + Make a signature on key of user @code{name}. If the key is not yet + signed by the default user (or the users given with @option{-u}), the program + displays the information of the key again, together with its + fingerprint and asks whether it should be signed. This question is + repeated for all users specified with + @option{-u}. + + @item lsign + @opindex keyedit:lsign + Same as "sign" but the signature is marked as non-exportable and will + therefore never be used by others. This may be used to make keys + valid only in the local environment. + + @item nrsign + @opindex keyedit:nrsign + Same as "sign" but the signature is marked as non-revocable and can + therefore never be revoked. + + @item tsign + @opindex keyedit:tsign + Make a trust signature. This is a signature that combines the notions + of certification (like a regular signature), and trust (like the + "trust" command). It is generally only useful in distinct communities + or groups. For more information please read the sections + ``Trust Signature'' and ``Regular Expression'' in RFC-4880. +@end table + +@c man:.RS +Note that "l" (for local / non-exportable), "nr" (for non-revocable, +and "t" (for trust) may be freely mixed and prefixed to "sign" to +create a signature of any type desired. +@c man:.RE + +If the option @option{--only-sign-text-ids} is specified, then any +non-text based user ids (e.g., photo IDs) will not be selected for +signing. + +@table @asis + + @item delsig + @opindex keyedit:delsig + Delete a signature. Note that it is not possible to retract a signature, + once it has been send to the public (i.e. to a keyserver). In that case + you better use @code{revsig}. + + @item revsig + @opindex keyedit:revsig + Revoke a signature. For every signature which has been generated by + one of the secret keys, GnuPG asks whether a revocation certificate + should be generated. + + @item check + @opindex keyedit:check + Check the signatures on all selected user IDs. With the extra + option @code{selfsig} only self-signatures are shown. + + @item adduid + @opindex keyedit:adduid + Create an additional user ID. + + @item addphoto + @opindex keyedit:addphoto + Create a photographic user ID. This will prompt for a JPEG file that + will be embedded into the user ID. Note that a very large JPEG will make + for a very large key. Also note that some programs will display your + JPEG unchanged (GnuPG), and some programs will scale it to fit in a + dialog box (PGP). + + @item showphoto + @opindex keyedit:showphoto + Display the selected photographic user ID. + + @item deluid + @opindex keyedit:deluid + Delete a user ID or photographic user ID. Note that it is not + possible to retract a user id, once it has been send to the public + (i.e. to a keyserver). In that case you better use @code{revuid}. + + @item revuid + @opindex keyedit:revuid + Revoke a user ID or photographic user ID. + + @item primary + @opindex keyedit:primary + Flag the current user id as the primary one, removes the primary user + id flag from all other user ids and sets the timestamp of all affected + self-signatures one second ahead. Note that setting a photo user ID + as primary makes it primary over other photo user IDs, and setting a + regular user ID as primary makes it primary over other regular user + IDs. + + @item keyserver + @opindex keyedit:keyserver + Set a preferred keyserver for the specified user ID(s). This allows + other users to know where you prefer they get your key from. See + @option{--keyserver-options honor-keyserver-url} for more on how this + works. Setting a value of "none" removes an existing preferred + keyserver. + + @item notation + @opindex keyedit:notation + Set a name=value notation for the specified user ID(s). See + @option{--cert-notation} for more on how this works. Setting a value of + "none" removes all notations, setting a notation prefixed with a minus + sign (-) removes that notation, and setting a notation name (without the + =value) prefixed with a minus sign removes all notations with that name. + + @item pref + @opindex keyedit:pref + List preferences from the selected user ID. This shows the actual + preferences, without including any implied preferences. + + @item showpref + @opindex keyedit:showpref + More verbose preferences listing for the selected user ID. This shows + the preferences in effect by including the implied preferences of 3DES + (cipher), SHA-1 (digest), and Uncompressed (compression) if they are + not already included in the preference list. In addition, the + preferred keyserver and signature notations (if any) are shown. + + @item setpref @var{string} + @opindex keyedit:setpref + Set the list of user ID preferences to @var{string} for all (or just + the selected) user IDs. Calling setpref with no arguments sets the + preference list to the default (either built-in or set via + @option{--default-preference-list}), and calling setpref with "none" + as the argument sets an empty preference list. Use @command{@gpgname + --version} to get a list of available algorithms. Note that while you + can change the preferences on an attribute user ID (aka "photo ID"), + GnuPG does not select keys via attribute user IDs so these preferences + will not be used by GnuPG. + + When setting preferences, you should list the algorithms in the order + which you'd like to see them used by someone else when encrypting a + message to your key. If you don't include 3DES, it will be + automatically added at the end. Note that there are many factors that + go into choosing an algorithm (for example, your key may not be the + only recipient), and so the remote OpenPGP application being used to + send to you may or may not follow your exact chosen order for a given + message. It will, however, only choose an algorithm that is present + on the preference list of every recipient key. See also the + INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS section below. + + @item addkey + @opindex keyedit:addkey + Add a subkey to this key. + + @item addcardkey + @opindex keyedit:addcardkey + Generate a subkey on a card and add it to this key. + + @item keytocard + @opindex keyedit:keytocard + Transfer the selected secret subkey (or the primary key if no subkey + has been selected) to a smartcard. The secret key in the keyring will + be replaced by a stub if the key could be stored successfully on the + card and you use the save command later. Only certain key types may be + transferred to the card. A sub menu allows you to select on what card + to store the key. Note that it is not possible to get that key back + from the card - if the card gets broken your secret key will be lost + unless you have a backup somewhere. + + @item bkuptocard @var{file} + @opindex keyedit:bkuptocard + Restore the given @var{file} to a card. This command may be used to restore a + backup key (as generated during card initialization) to a new card. In + almost all cases this will be the encryption key. You should use this + command only with the corresponding public key and make sure that the + file given as argument is indeed the backup to restore. You should then + select 2 to restore as encryption key. You will first be asked to enter + the passphrase of the backup key and then for the Admin PIN of the card. + + @item delkey + @opindex keyedit:delkey + Remove a subkey (secondary key). Note that it is not possible to retract + a subkey, once it has been send to the public (i.e. to a keyserver). In + that case you better use @code{revkey}. Also note that this only + deletes the public part of a key. + + @item revkey + @opindex keyedit:revkey + Revoke a subkey. + + @item expire + @opindex keyedit:expire + Change the key or subkey expiration time. If a subkey is selected, the + expiration time of this subkey will be changed. With no selection, the + key expiration of the primary key is changed. + + @item trust + @opindex keyedit:trust + Change the owner trust value for the key. This updates the trust-db + immediately and no save is required. + + @item disable + @itemx enable + @opindex keyedit:disable + @opindex keyedit:enable + Disable or enable an entire key. A disabled key can not normally be + used for encryption. + + @item addrevoker + @opindex keyedit:addrevoker + Add a designated revoker to the key. This takes one optional argument: + "sensitive". If a designated revoker is marked as sensitive, it will + not be exported by default (see export-options). + + @item passwd + @opindex keyedit:passwd + Change the passphrase of the secret key. + + @item toggle + @opindex keyedit:toggle + This is dummy command which exists only for backward compatibility. + + @item clean + @opindex keyedit:clean + Compact (by removing all signatures except the selfsig) any user ID + that is no longer usable (e.g. revoked, or expired). Then, remove any + signatures that are not usable by the trust calculations. + Specifically, this removes any signature that does not validate, any + signature that is superseded by a later signature, revoked signatures, + and signatures issued by keys that are not present on the keyring. + + @item minimize + @opindex keyedit:minimize + Make the key as small as possible. This removes all signatures from + each user ID except for the most recent self-signature. + + @item change-usage + @opindex keyedit:change-usage + Change the usage flags (capabilities) of the primary key or of + subkeys. These usage flags (e.g. Certify, Sign, Authenticate, + Encrypt) are set during key creation. Sometimes it is useful to + have the opportunity to change them (for example to add + Authenticate) after they have been created. Please take care when + doing this; the allowed usage flags depend on the key algorithm. + + @item cross-certify + @opindex keyedit:cross-certify + Add cross-certification signatures to signing subkeys that may not + currently have them. Cross-certification signatures protect against a + subtle attack against signing subkeys. See + @option{--require-cross-certification}. All new keys generated have + this signature by default, so this command is only useful to bring + older keys up to date. + + @item save + @opindex keyedit:save + Save all changes to the keyring and quit. + + @item quit + @opindex keyedit:quit + Quit the program without updating the + keyring. +@end table + +@c man:.RS +The listing shows you the key with its secondary keys and all user +IDs. The primary user ID is indicated by a dot, and selected keys or +user IDs are indicated by an asterisk. The trust +value is displayed with the primary key: "trust" is the assigned owner +trust and "validity" is the calculated validity of the key. Validity +values are also displayed for all user IDs. +For possible values of trust, @pxref{trust-values}. +@c man:.RE +@c ******** End Edit-key Options ********** + +@item --sign-key @var{name} +@opindex sign-key +Signs a public key with your secret key. This is a shortcut version of +the subcommand "sign" from @option{--edit}. + +@item --lsign-key @var{name} +@opindex lsign-key +Signs a public key with your secret key but marks it as +non-exportable. This is a shortcut version of the subcommand "lsign" +from @option{--edit-key}. + +@item --quick-sign-key @var{fpr} [@var{names}] +@itemx --quick-lsign-key @var{fpr} [@var{names}] +@opindex quick-sign-key +@opindex quick-lsign-key +Directly sign a key from the passphrase without any further user +interaction. The @var{fpr} must be the verified primary fingerprint +of a key in the local keyring. If no @var{names} are given, all +useful user ids are signed; with given [@var{names}] only useful user +ids matching one of theses names are signed. By default, or if a name +is prefixed with a '*', a case insensitive substring match is used. +If a name is prefixed with a '=' a case sensitive exact match is done. + +The command @option{--quick-lsign-key} marks the signatures as +non-exportable. If such a non-exportable signature already exists the +@option{--quick-sign-key} turns it into a exportable signature. If +you need to update an existing signature, for example to add or change +notation data, you need to use the option @option{--force-sign-key}. + +This command uses reasonable defaults and thus does not provide the +full flexibility of the "sign" subcommand from @option{--edit-key}. +Its intended use is to help unattended key signing by utilizing a list +of verified fingerprints. + +@item --quick-add-uid @var{user-id} @var{new-user-id} +@opindex quick-add-uid +This command adds a new user id to an existing key. In contrast to +the interactive sub-command @code{adduid} of @option{--edit-key} the +@var{new-user-id} is added verbatim with only leading and trailing +white space removed, it is expected to be UTF-8 encoded, and no checks +on its form are applied. + +@item --quick-revoke-uid @var{user-id} @var{user-id-to-revoke} +@opindex quick-revoke-uid +This command revokes a user ID on an existing key. It cannot be used +to revoke the last user ID on key (some non-revoked user ID must +remain), with revocation reason ``User ID is no longer valid''. If +you want to specify a different revocation reason, or to supply +supplementary revocation text, you should use the interactive +sub-command @code{revuid} of @option{--edit-key}. + +@item --quick-revoke-sig @var{fpr} @var{signing-fpr} [@var{names}] +@opindex quick-revoke-sig +This command revokes the key signatures made by @var{signing-fpr} from +the key specified by the fingerprint @var{fpr}. With @var{names} +given only the signatures on user ids of the key matching any of the +given names are affected (see @option{--quick-sign-key}). If a +revocation already exists a notice is printed instead of creating a +new revocation; no error is returned in this case. Note that key +signature revocations may be superseded by a newer key signature and +in turn again revoked. + +@item --quick-set-primary-uid @var{user-id} @var{primary-user-id} +@opindex quick-set-primary-uid +This command sets or updates the primary user ID flag on an existing +key. @var{user-id} specifies the key and @var{primary-user-id} the +user ID which shall be flagged as the primary user ID. The primary +user ID flag is removed from all other user ids and the timestamp of +all affected self-signatures is set one second ahead. + + +@item --change-passphrase @var{user-id} +@opindex change-passphrase +@itemx --passwd @var{user-id} +@opindex passwd +Change the passphrase of the secret key belonging to the certificate +specified as @var{user-id}. This is a shortcut for the sub-command +@code{passwd} of the edit key menu. When using together with the +option @option{--dry-run} this will not actually change the passphrase +but check that the current passphrase is correct. + +@end table + + +@c ******************************************* +@c *************** **************** +@c *************** OPTIONS **************** +@c *************** **************** +@c ******************************************* +@mansect options +@node GPG Options +@section Option Summary + +@command{@gpgname} features a bunch of options to control the exact +behaviour and to change the default configuration. + +@menu +* GPG Configuration Options:: How to change the configuration. +* GPG Key related Options:: Key related options. +* GPG Input and Output:: Input and Output. +* OpenPGP Options:: OpenPGP protocol specific options. +* Compliance Options:: Compliance options. +* GPG Esoteric Options:: Doing things one usually doesn't want to do. +* Deprecated Options:: Deprecated options. +@end menu + +Long options can be put in an options file (default +"~/.gnupg/gpg.conf"). Short option names will not work - for example, +"armor" is a valid option for the options file, while "a" is not. Do not +write the 2 dashes, but simply the name of the option and any required +arguments. Lines with a hash ('#') as the first non-white-space +character are ignored. Commands may be put in this file too, but that is +not generally useful as the command will execute automatically with +every execution of gpg. + +Please remember that option parsing stops as soon as a non-option is +encountered, you can explicitly stop parsing by using the special option +@option{--}. + +@c ******************************************* +@c ******** CONFIGURATION OPTIONS ********** +@c ******************************************* +@node GPG Configuration Options +@subsection How to change the configuration + +These options are used to change the configuration and most of them +are usually found in the option file. + +@table @gnupgtabopt + +@item --default-key @var{name} +@opindex default-key +Use @var{name} as the default key to sign with. If this option is not +used, the default key is the first key found in the secret keyring. +Note that @option{-u} or @option{--local-user} overrides this option. +This option may be given multiple times. In this case, the last key +for which a secret key is available is used. If there is no secret +key available for any of the specified values, GnuPG will not emit an +error message but continue as if this option wasn't given. + +@item --default-recipient @var{name} +@opindex default-recipient +Use @var{name} as default recipient if option @option{--recipient} is +not used and don't ask if this is a valid one. @var{name} must be +non-empty. + +@item --default-recipient-self +@opindex default-recipient-self +Use the default key as default recipient if option @option{--recipient} is not +used and don't ask if this is a valid one. The default key is the first +one from the secret keyring or the one set with @option{--default-key}. + +@item --no-default-recipient +@opindex no-default-recipient +Reset @option{--default-recipient} and @option{--default-recipient-self}. +Should not be used in an option file. + +@item -v, --verbose +@opindex verbose +Give more information during processing. If used +twice, the input data is listed in detail. + +@item --no-verbose +@opindex no-verbose +Reset verbose level to 0. Should not be used in an option file. + +@item -q, --quiet +@opindex quiet +Try to be as quiet as possible. Should not be used in an option file. + +@item --batch +@itemx --no-batch +@opindex batch +@opindex no-batch +Use batch mode. Never ask, do not allow interactive commands. +@option{--no-batch} disables this option. Note that even with a +filename given on the command line, gpg might still need to read from +STDIN (in particular if gpg figures that the input is a +detached signature and no data file has been specified). Thus if you +do not want to feed data via STDIN, you should connect STDIN to +@file{/dev/null}. + +It is highly recommended to use this option along with the options +@option{--status-fd} and @option{--with-colons} for any unattended use of +@command{gpg}. Should not be used in an option file. + +@item --no-tty +@opindex no-tty +Make sure that the TTY (terminal) is never used for any output. +This option is needed in some cases because GnuPG sometimes prints +warnings to the TTY even if @option{--batch} is used. + +@item --yes +@opindex yes +Assume "yes" on most questions. Should not be used in an option file. + +@item --no +@opindex no +Assume "no" on most questions. Should not be used in an option file. + + +@item --list-options @var{parameters} +@opindex list-options +This is a space or comma delimited string that gives options used when +listing keys and signatures (that is, @option{--list-keys}, +@option{--check-signatures}, @option{--list-public-keys}, +@option{--list-secret-keys}, and the @option{--edit-key} functions). +Options can be prepended with a @option{no-} (after the two dashes) to +give the opposite meaning. The options are: + +@table @asis + + @item show-photos + @opindex list-options:show-photos + Causes @option{--list-keys}, @option{--check-signatures}, + @option{--list-public-keys}, and @option{--list-secret-keys} to + display any photo IDs attached to the key. Defaults to no. See also + @option{--photo-viewer}. Does not work with @option{--with-colons}: + see @option{--attribute-fd} for the appropriate way to get photo data + for scripts and other frontends. + + @item show-usage + @opindex list-options:show-usage + Show usage information for keys and subkeys in the standard key + listing. This is a list of letters indicating the allowed usage for a + key (@code{E}=encryption, @code{S}=signing, @code{C}=certification, + @code{A}=authentication). Defaults to yes. + + @item show-policy-urls + @opindex list-options:show-policy-urls + Show policy URLs in the @option{--check-signatures} + listings. Defaults to no. + + @item show-notations + @itemx show-std-notations + @itemx show-user-notations + @opindex list-options:show-notations + @opindex list-options:show-std-notations + @opindex list-options:show-user-notations + Show all, IETF standard, or user-defined signature notations in the + @option{--check-signatures} listings. Defaults to no. + + @item show-keyserver-urls + @opindex list-options:show-keyserver-urls + Show any preferred keyserver URL in the + @option{--check-signatures} listings. Defaults to no. + + @item show-uid-validity + @opindex list-options:show-uid-validity + Display the calculated validity of user IDs during key listings. + Defaults to yes. + + @item show-unusable-uids + @opindex list-options:show-unusable-uids + Show revoked and expired user IDs in key listings. Defaults to no. + + @item show-unusable-subkeys + @opindex list-options:show-unusable-subkeys + Show revoked and expired subkeys in key listings. Defaults to no. + + @item show-keyring + @opindex list-options:show-keyring + Display the keyring name at the head of key listings to show which + keyring a given key resides on. Defaults to no. + + @item show-sig-expire + @opindex list-options:show-sig-expire + Show signature expiration dates (if any) during + @option{--check-signatures} listings. Defaults to no. + + @item show-sig-subpackets + @opindex list-options:show-sig-subpackets + Include signature subpackets in the key listing. This option can take an + optional argument list of the subpackets to list. If no argument is + passed, list all subpackets. Defaults to no. This option is only + meaningful when using @option{--with-colons} along with + @option{--check-signatures}. + + @item show-only-fpr-mbox + @opindex list-options:show-only-fpr-mbox + For each user-id which has a valid mail address print + only the fingerprint followed by the mail address. +@end table + +@item --verify-options @var{parameters} +@opindex verify-options +This is a space or comma delimited string that gives options used when +verifying signatures. Options can be prepended with a `no-' to give +the opposite meaning. The options are: + +@table @asis + + @item show-photos + @opindex verify-options:show-photos + Display any photo IDs present on the key that issued the signature. + Defaults to no. See also @option{--photo-viewer}. + + @item show-policy-urls + @opindex verify-options:show-policy-urls + Show policy URLs in the signature being verified. Defaults to yes. + + @item show-notations + @itemx show-std-notations + @itemx show-user-notations + @opindex verify-options:show-notations + @opindex verify-options:show-std-notations + @opindex verify-options:show-user-notations + Show all, IETF standard, or user-defined signature notations in the + signature being verified. Defaults to IETF standard. + + @item show-keyserver-urls + @opindex verify-options:show-keyserver-urls + Show any preferred keyserver URL in the signature being verified. + Defaults to yes. + + @item show-uid-validity + @opindex verify-options:show-uid-validity + Display the calculated validity of the user IDs on the key that issued + the signature. Defaults to yes. + + @item show-unusable-uids + @opindex verify-options:show-unusable-uids + Show revoked and expired user IDs during signature verification. + Defaults to no. + + @item show-primary-uid-only + @opindex verify-options:show-primary-uid-only + Show only the primary user ID during signature verification. That is + all the AKA lines as well as photo Ids are not shown with the signature + verification status. + + @item pka-lookups + @opindex verify-options:pka-lookups + Enable PKA lookups to verify sender addresses. Note that PKA is based + on DNS, and so enabling this option may disclose information on when + and what signatures are verified or to whom data is encrypted. This + is similar to the "web bug" described for the @option{--auto-key-retrieve} + option. + + @item pka-trust-increase + @opindex verify-options:pka-trust-increase + Raise the trust in a signature to full if the signature passes PKA + validation. This option is only meaningful if pka-lookups is set. +@end table + +@item --enable-large-rsa +@itemx --disable-large-rsa +@opindex enable-large-rsa +@opindex disable-large-rsa +With --generate-key and --batch, enable the creation of RSA secret keys as +large as 8192 bit. Note: 8192 bit is more than is generally +recommended. These large keys don't significantly improve security, +but they are more expensive to use, and their signatures and +certifications are larger. This option is only available if the +binary was build with large-secmem support. + +@item --enable-dsa2 +@itemx --disable-dsa2 +@opindex enable-dsa2 +@opindex disable-dsa2 +Enable hash truncation for all DSA keys even for old DSA Keys up to +1024 bit. This is also the default with @option{--openpgp}. Note +that older versions of GnuPG also required this flag to allow the +generation of DSA larger than 1024 bit. + +@item --photo-viewer @var{string} +@opindex photo-viewer +This is the command line that should be run to view a photo ID. "%i" +will be expanded to a filename containing the photo. "%I" does the +same, except the file will not be deleted once the viewer exits. +Other flags are "%k" for the key ID, "%K" for the long key ID, "%f" +for the key fingerprint, "%t" for the extension of the image type +(e.g. "jpg"), "%T" for the MIME type of the image (e.g. "image/jpeg"), +"%v" for the single-character calculated validity of the image being +viewed (e.g. "f"), "%V" for the calculated validity as a string (e.g. +"full"), "%U" for a base32 encoded hash of the user ID, +and "%%" for an actual percent sign. If neither %i or %I are present, +then the photo will be supplied to the viewer on standard input. + +On Unix the default viewer is +@code{xloadimage -fork -quiet -title 'KeyID 0x%k' STDIN} +with a fallback to +@code{display -title 'KeyID 0x%k' %i} +and finally to +@code{xdg-open %i}. +On Windows +@code{!ShellExecute 400 %i} is used; here the command is a meta +command to use that API call followed by a wait time in milliseconds +which is used to give the viewer time to read the temporary image file +before gpg deletes it again. Note that if your image viewer program +is not secure, then executing it from gpg does not make it secure. + +@item --exec-path @var{string} +@opindex exec-path +@efindex PATH +Sets a list of directories to search for photo viewers If not provided +photo viewers use the @code{PATH} environment variable. + +@item --keyring @var{file} +@opindex keyring +Add @var{file} to the current list of keyrings. If @var{file} begins +with a tilde and a slash, these are replaced by the $HOME directory. If +the filename does not contain a slash, it is assumed to be in the GnuPG +home directory ("~/.gnupg" unless @option{--homedir} or $GNUPGHOME is +used). + +Note that this adds a keyring to the current list. If the intent is to +use the specified keyring alone, use @option{--keyring} along with +@option{--no-default-keyring}. + +If the option @option{--no-keyring} has been used no keyrings will +be used at all. + +@item --primary-keyring @var{file} +@opindex primary-keyring +This is a varian of @option{--keyring} and designates @var{file} as +the primary public keyring. This means that newly imported keys (via +@option{--import} or keyserver @option{--recv-from}) will go to this +keyring. + + +@item --secret-keyring @var{file} +@opindex secret-keyring +This is an obsolete option and ignored. All secret keys are stored in +the @file{private-keys-v1.d} directory below the GnuPG home directory. + +@item --trustdb-name @var{file} +@opindex trustdb-name +Use @var{file} instead of the default trustdb. If @var{file} begins +with a tilde and a slash, these are replaced by the $HOME directory. If +the filename does not contain a slash, it is assumed to be in the GnuPG +home directory (@file{~/.gnupg} if @option{--homedir} or $GNUPGHOME is +not used). + +@include opt-homedir.texi + + +@item --display-charset @var{name} +@opindex display-charset +Set the name of the native character set. This is used to convert some +informational strings like user IDs to the proper UTF-8 encoding. +Note that this has nothing to do with the character set of data to be +encrypted or signed; GnuPG does not recode user-supplied data. If this +option is not used, the default character set is determined from the +current locale. A verbosity level of 3 shows the chosen set. This +option should not be used on Windows. Valid values for @var{name} +are: + +@table @asis + + @item iso-8859-1 + @opindex display-charset:iso-8859-1 + This is the Latin 1 set. + + @item iso-8859-2 + @opindex display-charset:iso-8859-2 + The Latin 2 set. + + @item iso-8859-15 + @opindex display-charset:iso-8859-15 + This is currently an alias for + the Latin 1 set. + + @item koi8-r + @opindex display-charset:koi8-r + The usual Russian set (RFC-1489). + + @item utf-8 + @opindex display-charset:utf-8 + Bypass all translations and assume + that the OS uses native UTF-8 encoding. +@end table + +@item --utf8-strings +@itemx --no-utf8-strings +@opindex utf8-strings +Assume that command line arguments are given as UTF-8 strings. The +default (@option{--no-utf8-strings}) is to assume that arguments are +encoded in the character set as specified by +@option{--display-charset}. These options affect all following +arguments. Both options may be used multiple times. +This option should not be used in an option file. + +This option has no effect on Windows. There the internal used UTF-8 +encoding is translated for console input and output. The command line +arguments are expected as Unicode and translated to UTF-8. Thus when +calling this program from another, make sure to use the Unicode +version of CreateProcess. + +@anchor{gpg-option --options} +@item --options @var{file} +@opindex options +Read options from @var{file} and do not try to read them from the +default options file in the homedir (see @option{--homedir}). This +option is ignored if used in an options file. + +@item --no-options +@opindex no-options +Shortcut for @option{--options /dev/null}. This option is detected +before an attempt to open an option file. Using this option will also +prevent the creation of a @file{~/.gnupg} homedir. + +@item -z @var{n} +@itemx --compress-level @var{n} +@itemx --bzip2-compress-level @var{n} +@opindex compress-level +@opindex bzip2-compress-level +Set compression level to @var{n} for the ZIP and ZLIB compression +algorithms. The default is to use the default compression level of zlib +(normally 6). @option{--bzip2-compress-level} sets the compression level +for the BZIP2 compression algorithm (defaulting to 6 as well). This is a +different option from @option{--compress-level} since BZIP2 uses a +significant amount of memory for each additional compression level. +@option{-z} sets both. A value of 0 for @var{n} disables compression. + +@item --bzip2-decompress-lowmem +@opindex bzip2-decompress-lowmem +Use a different decompression method for BZIP2 compressed files. This +alternate method uses a bit more than half the memory, but also runs +at half the speed. This is useful under extreme low memory +circumstances when the file was originally compressed at a high +@option{--bzip2-compress-level}. + + +@item --mangle-dos-filenames +@itemx --no-mangle-dos-filenames +@opindex mangle-dos-filenames +@opindex no-mangle-dos-filenames +Older version of Windows cannot handle filenames with more than one +dot. @option{--mangle-dos-filenames} causes GnuPG to replace (rather +than add to) the extension of an output filename to avoid this +problem. This option is off by default and has no effect on non-Windows +platforms. + +@item --ask-cert-level +@itemx --no-ask-cert-level +@opindex ask-cert-level +When making a key signature, prompt for a certification level. If this +option is not specified, the certification level used is set via +@option{--default-cert-level}. See @option{--default-cert-level} for +information on the specific levels and how they are +used. @option{--no-ask-cert-level} disables this option. This option +defaults to no. + +@item --default-cert-level @var{n} +@opindex default-cert-level +The default to use for the check level when signing a key. + +0 means you make no particular claim as to how carefully you verified +the key. + +1 means you believe the key is owned by the person who claims to own +it but you could not, or did not verify the key at all. This is +useful for a "persona" verification, where you sign the key of a +pseudonymous user. + +2 means you did casual verification of the key. For example, this +could mean that you verified the key fingerprint and checked the +user ID on the key against a photo ID. + +3 means you did extensive verification of the key. For example, this +could mean that you verified the key fingerprint with the owner of the +key in person, and that you checked, by means of a hard to forge +document with a photo ID (such as a passport) that the name of the key +owner matches the name in the user ID on the key, and finally that you +verified (by exchange of email) that the email address on the key +belongs to the key owner. + +Note that the examples given above for levels 2 and 3 are just that: +examples. In the end, it is up to you to decide just what "casual" +and "extensive" mean to you. + +This option defaults to 0 (no particular claim). + +@item --min-cert-level +@opindex min-cert-level +When building the trust database, treat any signatures with a +certification level below this as invalid. Defaults to 2, which +disregards level 1 signatures. Note that level 0 "no particular +claim" signatures are always accepted. + +@item --trusted-key @var{long key ID or fingerprint} +@opindex trusted-key +Assume that the specified key (which should be given as fingerprint) +is as trustworthy as one of your own secret keys. This option is +useful if you don't want to keep your secret keys (or one of them) +online but still want to be able to check the validity of a given +recipient's or signator's key. If the given key is not locally +available but an LDAP keyserver is configured the missing key is +imported from that server. + +@item --trust-model @{pgp|classic|tofu|tofu+pgp|direct|always|auto@} +@opindex trust-model +Set what trust model GnuPG should follow. The models are: + +@table @asis + + @item pgp + @opindex trust-model:pgp + This is the Web of Trust combined with trust signatures as used in PGP + 5.x and later. This is the default trust model when creating a new + trust database. + + @item classic + @opindex trust-model:classic + This is the standard Web of Trust as introduced by PGP 2. + + @item tofu + @opindex trust-model:tofu + @anchor{trust-model-tofu} + TOFU stands for Trust On First Use. In this trust model, the first + time a key is seen, it is memorized. If later another key with a + user id with the same email address is seen, both keys are marked as + suspect. In that case, the next time either is used, a warning is + displayed describing the conflict, why it might have occurred + (either the user generated a new key and failed to cross sign the + old and new keys, the key is forgery, or a man-in-the-middle attack + is being attempted), and the user is prompted to manually confirm + the validity of the key in question. + + Because a potential attacker is able to control the email address + and thereby circumvent the conflict detection algorithm by using an + email address that is similar in appearance to a trusted email + address, whenever a message is verified, statistics about the number + of messages signed with the key are shown. In this way, a user can + easily identify attacks using fake keys for regular correspondents. + + When compared with the Web of Trust, TOFU offers significantly + weaker security guarantees. In particular, TOFU only helps ensure + consistency (that is, that the binding between a key and email + address doesn't change). A major advantage of TOFU is that it + requires little maintenance to use correctly. To use the web of + trust properly, you need to actively sign keys and mark users as + trusted introducers. This is a time-consuming process and anecdotal + evidence suggests that even security-conscious users rarely take the + time to do this thoroughly and instead rely on an ad-hoc TOFU + process. + + In the TOFU model, policies are associated with bindings between + keys and email addresses (which are extracted from user ids and + normalized). There are five policies, which can be set manually + using the @option{--tofu-policy} option. The default policy can be + set using the @option{--tofu-default-policy} option. + + The TOFU policies are: @code{auto}, @code{good}, @code{unknown}, + @code{bad} and @code{ask}. The @code{auto} policy is used by + default (unless overridden by @option{--tofu-default-policy}) and + marks a binding as marginally trusted. The @code{good}, + @code{unknown} and @code{bad} policies mark a binding as fully + trusted, as having unknown trust or as having trust never, + respectively. The @code{unknown} policy is useful for just using + TOFU to detect conflicts, but to never assign positive trust to a + binding. The final policy, @code{ask} prompts the user to indicate + the binding's trust. If batch mode is enabled (or input is + inappropriate in the context), then the user is not prompted and the + @code{undefined} trust level is returned. + + @item tofu+pgp + @opindex trust-model:tofu+pgp + This trust model combines TOFU with the Web of Trust. This is done + by computing the trust level for each model and then taking the + maximum trust level where the trust levels are ordered as follows: + @code{unknown < undefined < marginal < fully < ultimate < expired < + never}. + + By setting @option{--tofu-default-policy=unknown}, this model can be + used to implement the web of trust with TOFU's conflict detection + algorithm, but without its assignment of positive trust values, + which some security-conscious users don't like. + + @item direct + @opindex trust-model:direct + Key validity is set directly by the user and not calculated via the + Web of Trust. This model is solely based on the key and does + not distinguish user IDs. Note that when changing to another trust + model the trust values assigned to a key are transformed into + ownertrust values, which also indicate how you trust the owner of + the key to sign other keys. + + @item always + @opindex trust-model:always + Skip key validation and assume that used keys are always fully + valid. You generally won't use this unless you are using some + external validation scheme. This option also suppresses the + "[uncertain]" tag printed with signature checks when there is no + evidence that the user ID is bound to the key. Note that this + trust model still does not allow the use of expired, revoked, or + disabled keys. + + @item auto + @opindex trust-model:auto + Select the trust model depending on whatever the internal trust + database says. This is the default model if such a database already + exists. Note that a tofu trust model is not considered here and + must be enabled explicitly. +@end table + +@item --auto-key-locate @var{mechanisms} +@itemx --no-auto-key-locate +@opindex auto-key-locate +GnuPG can automatically locate and retrieve keys as needed using this +option. This happens when encrypting to an email address (in the +"user@@example.com" form), and there are no "user@@example.com" keys +on the local keyring. This option takes any number of the mechanisms +listed below, in the order they are to be tried. Instead of listing +the mechanisms as comma delimited arguments, the option may also be +given several times to add more mechanism. The option +@option{--no-auto-key-locate} or the mechanism "clear" resets the +list. The default is "local,wkd". + +@table @asis + + @item cert + Locate a key using DNS CERT, as specified in RFC-4398. + + @item pka + Locate a key using DNS PKA. + + @item dane + Locate a key using DANE, as specified + in draft-ietf-dane-openpgpkey-05.txt. + + @item wkd + Locate a key using the Web Key Directory protocol. + + @item ldap + Using DNS Service Discovery, check the domain in question for any LDAP + keyservers to use. If this fails, attempt to locate the key using the + PGP Universal method of checking @samp{ldap://keys.(thedomain)}. + + @item ntds + Locate the key using the Active Directory (Windows only). This + method also allows to search by fingerprint using the command + @option{--locate-external-key}. Note that this mechanism is + actually a shortcut for the mechanism @samp{keyserver} but using + "ldap:///" as the keyserver. + + @item keyserver + Locate a key using a keyserver. This method also allows to search + by fingerprint using the command @option{--locate-external-key} if + any of the configured keyservers is an LDAP server. + + @item keyserver-URL + In addition, a keyserver URL as used in the @command{dirmngr} + configuration may be used here to query that particular keyserver. + This method also allows to search by fingerprint using the command + @option{--locate-external-key} if the URL specifies an LDAP server. + + @item local + Locate the key using the local keyrings. This mechanism allows the user to + select the order a local key lookup is done. Thus using + @samp{--auto-key-locate local} is identical to + @option{--no-auto-key-locate}. + + @item nodefault + This flag disables the standard local key lookup, done before any of the + mechanisms defined by the @option{--auto-key-locate} are tried. The + position of this mechanism in the list does not matter. It is not + required if @code{local} is also used. + + @item clear + Clear all defined mechanisms. This is useful to override + mechanisms given in a config file. Note that a @code{nodefault} in + @var{mechanisms} will also be cleared unless it is given after the + @code{clear}. + +@end table + + +@item --auto-key-import +@itemx --no-auto-key-import +@opindex auto-key-import +@opindex no-auto-key-import +This is an offline mechanism to get a missing key for signature +verification and for later encryption to this key. If this option is +enabled and a signature includes an embedded key, that key is +used to verify the signature and on verification success that key is +imported. The default is @option{--no-auto-key-import}. + +On the sender (signing) site the option @option{--include-key-block} +needs to be used to put the public part of the signing key as “Key +Block subpacket” into the signature. + +@item --auto-key-retrieve +@itemx --no-auto-key-retrieve +@opindex auto-key-retrieve +@opindex no-auto-key-retrieve +These options enable or disable the automatic retrieving of keys from +a keyserver when verifying signatures made by keys that are not on the +local keyring. The default is @option{--no-auto-key-retrieve}. + +The order of methods tried to lookup the key is: + +1. If the option @option{--auto-key-import} is set and the signatures +includes an embedded key, that key is used to verify the +signature and on verification success that key is imported. + +2. If a preferred keyserver is specified in the signature and the +option @option{honor-keyserver-url} is active (which is not the +default), that keyserver is tried. Note that the creator of the +signature uses the option @option{--sig-keyserver-url} to specify the +preferred keyserver for data signatures. + +3. If the signature has the Signer's UID set (e.g. using +@option{--sender} while creating the signature) a Web Key Directory +(WKD) lookup is done. This is the default configuration but can be +disabled by removing WKD from the auto-key-locate list or by using the +option @option{--disable-signer-uid}. + +4. If the option @option{honor-pka-record} is active, the legacy PKA +method is used. + +5. If any keyserver is configured and the Issuer Fingerprint is part +of the signature (since GnuPG 2.1.16), the configured keyservers are +tried. + +Note that this option makes a "web bug" like behavior possible. +Keyserver or Web Key Directory operators can see which keys you +request, so by sending you a message signed by a brand new key (which +you naturally will not have on your local keyring), the operator can +tell both your IP address and the time when you verified the +signature. + +@item --keyid-format @{none|short|0xshort|long|0xlong@} +@opindex keyid-format +Select how to display key IDs. "none" does not show the key ID at all +but shows the fingerprint in a separate line. "short" is the +traditional 8-character key ID. "long" is the more accurate (but less +convenient) 16-character key ID. Add an "0x" to either to include an +"0x" at the beginning of the key ID, as in 0x99242560. Note that this +option is ignored if the option @option{--with-colons} is used. + +@item --keyserver @var{name} +@opindex keyserver +This option is deprecated - please use the @option{--keyserver} in +@file{dirmngr.conf} instead. + +Use @var{name} as your keyserver. This is the server that +@option{--receive-keys}, @option{--send-keys}, and @option{--search-keys} +will communicate with to receive keys from, send keys to, and search for +keys on. The format of the @var{name} is a URI: +`scheme:[//]keyservername[:port]' The scheme is the type of keyserver: +"hkp"/"hkps" for the HTTP (or compatible) keyservers or "ldap"/"ldaps" +for the LDAP keyservers. Note that your particular installation of +GnuPG may have other keyserver types available as well. Keyserver +schemes are case-insensitive. + +Most keyservers synchronize with each other, so there is generally no +need to send keys to more than one server. The keyserver +@code{hkp://keys.gnupg.net} uses round robin DNS to give a different +keyserver each time you use it. + +@item --keyserver-options @{@var{name}=@var{value}@} +@opindex keyserver-options +This is a space or comma delimited string that gives options for the +keyserver. Options can be prefixed with a `no-' to give the opposite +meaning. Valid import-options or export-options may be used here as +well to apply to importing (@option{--recv-key}) or exporting +(@option{--send-key}) a key from a keyserver. While not all options +are available for all keyserver types, some common options are: + +@table @asis + + @item include-revoked + When searching for a key with @option{--search-keys}, include keys that + are marked on the keyserver as revoked. Note that not all keyservers + differentiate between revoked and unrevoked keys, and for such + keyservers this option is meaningless. Note also that most keyservers do + not have cryptographic verification of key revocations, and so turning + this option off may result in skipping keys that are incorrectly marked + as revoked. + + @item include-disabled + When searching for a key with @option{--search-keys}, include keys that + are marked on the keyserver as disabled. Note that this option is not + used with HKP keyservers. + + @item auto-key-retrieve + This is an obsolete alias for the option @option{auto-key-retrieve}. + Please do not use it; it will be removed in future versions.. + + @item honor-keyserver-url + When using @option{--refresh-keys}, if the key in question has a preferred + keyserver URL, then use that preferred keyserver to refresh the key + from. In addition, if auto-key-retrieve is set, and the signature + being verified has a preferred keyserver URL, then use that preferred + keyserver to fetch the key from. Note that this option introduces a + "web bug": The creator of the key can see when the keys is + refreshed. Thus this option is not enabled by default. + + @item honor-pka-record + If @option{--auto-key-retrieve} is used, and the signature being + verified has a PKA record, then use the PKA information to fetch + the key. Defaults to "yes". + + @item include-subkeys + When receiving a key, include subkeys as potential targets. Note that + this option is not used with HKP keyservers, as they do not support + retrieving keys by subkey id. + + @item timeout + @itemx http-proxy=@var{value} + @itemx verbose + @itemx debug + @itemx check-cert + @item ca-cert-file + These options have no more function since GnuPG 2.1. Use the + @code{dirmngr} configuration options instead. + +@end table + +The default list of options is: "self-sigs-only, import-clean, +repair-keys, repair-pks-subkey-bug, export-attributes, +honor-pka-record". However, if +the actual used source is an LDAP server "no-self-sigs-only" is +assumed unless "self-sigs-only" has been explictly configured. + + +@item --completes-needed @var{n} +@opindex compliant-needed +Number of completely trusted users to introduce a new +key signer (defaults to 1). + +@item --marginals-needed @var{n} +@opindex marginals-needed +Number of marginally trusted users to introduce a new +key signer (defaults to 3) + +@item --tofu-default-policy @{auto|good|unknown|bad|ask@} +@opindex tofu-default-policy +The default TOFU policy (defaults to @code{auto}). For more +information about the meaning of this option, @pxref{trust-model-tofu}. + +@item --max-cert-depth @var{n} +@opindex max-cert-depth +Maximum depth of a certification chain (default is 5). + +@item --no-sig-cache +@opindex no-sig-cache +Do not cache the verification status of key signatures. +Caching gives a much better performance in key listings. However, if +you suspect that your public keyring is not safe against write +modifications, you can use this option to disable the caching. It +probably does not make sense to disable it because all kind of damage +can be done if someone else has write access to your public keyring. + +@item --auto-check-trustdb +@itemx --no-auto-check-trustdb +@opindex auto-check-trustdb +If GnuPG feels that its information about the Web of Trust has to be +updated, it automatically runs the @option{--check-trustdb} command +internally. This may be a time consuming +process. @option{--no-auto-check-trustdb} disables this option. + +@item --use-agent +@itemx --no-use-agent +@opindex use-agent +This is dummy option. @command{@gpgname} always requires the agent. + +@item --gpg-agent-info +@opindex gpg-agent-info +This is dummy option. It has no effect when used with @command{@gpgname}. + + +@item --agent-program @var{file} +@opindex agent-program +Specify an agent program to be used for secret key operations. The +default value is determined by running @command{gpgconf} with the +option @option{--list-dirs}. Note that the pipe symbol (@code{|}) is +used for a regression test suite hack and may thus not be used in the +file name. + +@item --dirmngr-program @var{file} +@opindex dirmngr-program +Specify a dirmngr program to be used for keyserver access. The +default value is @file{@value{BINDIR}/dirmngr}. + +@item --disable-dirmngr +Entirely disable the use of the Dirmngr. + +@item --no-autostart +@opindex no-autostart +Do not start the gpg-agent or the dirmngr if it has not yet been +started and its service is required. This option is mostly useful on +machines where the connection to gpg-agent has been redirected to +another machines. If dirmngr is required on the remote machine, it +may be started manually using @command{gpgconf --launch dirmngr}. + +@item --lock-once +@opindex lock-once +Lock the databases the first time a lock is requested +and do not release the lock until the process +terminates. + +@item --lock-multiple +@opindex lock-multiple +Release the locks every time a lock is no longer +needed. Use this to override a previous @option{--lock-once} +from a config file. + +@item --lock-never +@opindex lock-never +Disable locking entirely. This option should be used only in very +special environments, where it can be assured that only one process +is accessing those files. A bootable floppy with a stand-alone +encryption system will probably use this. Improper usage of this +option may lead to data and key corruption. + +@item --exit-on-status-write-error +@opindex exit-on-status-write-error +This option will cause write errors on the status FD to immediately +terminate the process. That should in fact be the default but it never +worked this way and thus we need an option to enable this, so that the +change won't break applications which close their end of a status fd +connected pipe too early. Using this option along with +@option{--enable-progress-filter} may be used to cleanly cancel long +running gpg operations. + +@item --limit-card-insert-tries @var{n} +@opindex limit-card-insert-tries +With @var{n} greater than 0 the number of prompts asking to insert a +smartcard gets limited to N-1. Thus with a value of 1 gpg won't at +all ask to insert a card if none has been inserted at startup. This +option is useful in the configuration file in case an application does +not know about the smartcard support and waits ad infinitum for an +inserted card. + +@item --no-random-seed-file +@opindex no-random-seed-file +GnuPG uses a file to store its internal random pool over invocations. +This makes random generation faster; however sometimes write operations +are not desired. This option can be used to achieve that with the cost of +slower random generation. + +@item --no-greeting +@opindex no-greeting +Suppress the initial copyright message. + +@item --no-secmem-warning +@opindex no-secmem-warning +Suppress the warning about "using insecure memory". + +@item --no-permission-warning +@opindex permission-warning +Suppress the warning about unsafe file and home directory (@option{--homedir}) +permissions. Note that the permission checks that GnuPG performs are +not intended to be authoritative, but rather they simply warn about +certain common permission problems. Do not assume that the lack of a +warning means that your system is secure. + +Note that the warning for unsafe @option{--homedir} permissions cannot be +suppressed in the gpg.conf file, as this would allow an attacker to +place an unsafe gpg.conf file in place, and use this file to suppress +warnings about itself. The @option{--homedir} permissions warning may only be +suppressed on the command line. + +@item --require-secmem +@itemx --no-require-secmem +@opindex require-secmem +Refuse to run if GnuPG cannot get secure memory. Defaults to no +(i.e. run, but give a warning). + + +@item --require-cross-certification +@itemx --no-require-cross-certification +@opindex require-cross-certification +When verifying a signature made from a subkey, ensure that the cross +certification "back signature" on the subkey is present and valid. This +protects against a subtle attack against subkeys that can sign. +Defaults to @option{--require-cross-certification} for +@command{@gpgname}. + +@item --expert +@itemx --no-expert +@opindex expert +Allow the user to do certain nonsensical or "silly" things like +signing an expired or revoked key, or certain potentially incompatible +things like generating unusual key types. This also disables certain +warning messages about potentially incompatible actions. As the name +implies, this option is for experts only. If you don't fully +understand the implications of what it allows you to do, leave this +off. @option{--no-expert} disables this option. + +@end table + + +@c ******************************************* +@c ******** KEY RELATED OPTIONS ************ +@c ******************************************* +@node GPG Key related Options +@subsection Key related options + +@table @gnupgtabopt + +@item --recipient @var{name} +@itemx -r +@opindex recipient +Encrypt for user id @var{name}. If this option or +@option{--hidden-recipient} is not specified, GnuPG asks for the user-id +unless @option{--default-recipient} is given. + +@item --hidden-recipient @var{name} +@itemx -R +@opindex hidden-recipient +Encrypt for user ID @var{name}, but hide the key ID of this user's +key. This option helps to hide the receiver of the message and is a +limited countermeasure against traffic analysis. If this option or +@option{--recipient} is not specified, GnuPG asks for the user ID unless +@option{--default-recipient} is given. + +@item --recipient-file @var{file} +@itemx -f +@opindex recipient-file +This option is similar to @option{--recipient} except that it +encrypts to a key stored in the given file. @var{file} must be the +name of a file containing exactly one key. @command{@gpgname} assumes that +the key in this file is fully valid. + +@item --hidden-recipient-file @var{file} +@itemx -F +@opindex hidden-recipient-file +This option is similar to @option{--hidden-recipient} except that it +encrypts to a key stored in the given file. @var{file} must be the +name of a file containing exactly one key. @command{@gpgname} assumes that +the key in this file is fully valid. + +@item --encrypt-to @var{name} +@opindex encrypt-to +Same as @option{--recipient} but this one is intended for use in the +options file and may be used with your own user-id as an +"encrypt-to-self". These keys are only used when there are other +recipients given either by use of @option{--recipient} or by the asked +user id. No trust checking is performed for these user ids and even +disabled keys can be used. + +@item --hidden-encrypt-to @var{name} +@opindex hidden-encrypt-to +Same as @option{--hidden-recipient} but this one is intended for use in the +options file and may be used with your own user-id as a hidden +"encrypt-to-self". These keys are only used when there are other +recipients given either by use of @option{--recipient} or by the asked user id. +No trust checking is performed for these user ids and even disabled +keys can be used. + +@item --no-encrypt-to +@opindex no-encrypt-to +Disable the use of all @option{--encrypt-to} and +@option{--hidden-encrypt-to} keys. + +@item --group @{@var{name}=@var{value}@} +@opindex group +Sets up a named group, which is similar to aliases in email programs. +Any time the group name is a recipient (@option{-r} or +@option{--recipient}), it will be expanded to the values +specified. Multiple groups with the same name are automatically merged +into a single group. + +The values are @code{key IDs} or fingerprints, but any key description +is accepted. Note that a value with spaces in it will be treated as +two different values. Note also there is only one level of expansion +--- you cannot make an group that points to another group. When used +from the command line, it may be necessary to quote the argument to +this option to prevent the shell from treating it as multiple +arguments. + +@item --ungroup @var{name} +@opindex ungroup +Remove a given entry from the @option{--group} list. + +@item --no-groups +@opindex no-groups +Remove all entries from the @option{--group} list. + +@item --local-user @var{name} +@itemx -u +@opindex local-user +Use @var{name} as the key to sign with. Note that this option overrides +@option{--default-key}. + +@item --sender @var{mbox} +@opindex sender +This option has two purposes. @var{mbox} must either be a complete +user id with a proper mail address or just a mail address. When +creating a signature this option tells gpg the user id of a key used +to make a signature if the key was not directly specified by a user +id. When verifying a signature the @var{mbox} is used to restrict the +information printed by the TOFU code to matching user ids. + +@item --try-secret-key @var{name} +@opindex try-secret-key +For hidden recipients GPG needs to know the keys to use for trial +decryption. The key set with @option{--default-key} is always tried +first, but this is often not sufficient. This option allows setting more +keys to be used for trial decryption. Although any valid user-id +specification may be used for @var{name} it makes sense to use at least +the long keyid to avoid ambiguities. Note that gpg-agent might pop up a +pinentry for a lot keys to do the trial decryption. If you want to stop +all further trial decryption you may use close-window button instead of +the cancel button. + +@item --try-all-secrets +@opindex try-all-secrets +Don't look at the key ID as stored in the message but try all secret +keys in turn to find the right decryption key. This option forces the +behaviour as used by anonymous recipients (created by using +@option{--throw-keyids} or @option{--hidden-recipient}) and might come +handy in case where an encrypted message contains a bogus key ID. + +@item --skip-hidden-recipients +@itemx --no-skip-hidden-recipients +@opindex skip-hidden-recipients +@opindex no-skip-hidden-recipients +During decryption skip all anonymous recipients. This option helps in +the case that people use the hidden recipients feature to hide their +own encrypt-to key from others. If one has many secret keys this +may lead to a major annoyance because all keys are tried in turn to +decrypt something which was not really intended for it. The drawback +of this option is that it is currently not possible to decrypt a +message which includes real anonymous recipients. + + +@end table + +@c ******************************************* +@c ******** INPUT AND OUTPUT *************** +@c ******************************************* +@node GPG Input and Output +@subsection Input and Output + +@table @gnupgtabopt + +@item --armor +@itemx -a +@opindex armor +Create ASCII armored output. The default is to create the binary +OpenPGP format. + +@item --no-armor +@opindex no-armor +Assume the input data is not in ASCII armored format. + +@item --output @var{file} +@itemx -o @var{file} +@opindex output +Write output to @var{file}. To write to stdout use @code{-} as the +filename. + +@item --max-output @var{n} +@opindex max-output +This option sets a limit on the number of bytes that will be generated +when processing a file. Since OpenPGP supports various levels of +compression, it is possible that the plaintext of a given message may be +significantly larger than the original OpenPGP message. While GnuPG +works properly with such messages, there is often a desire to set a +maximum file size that will be generated before processing is forced to +stop by the OS limits. Defaults to 0, which means "no limit". + +@item --input-size-hint @var{n} +@opindex input-size-hint +This option can be used to tell GPG the size of the input data in +bytes. @var{n} must be a positive base-10 number. This option is +only useful if the input is not taken from a file. GPG may use this +hint to optimize its buffer allocation strategy. It is also used by +the @option{--status-fd} line ``PROGRESS'' to provide a value for +``total'' if that is not available by other means. + +@item --key-origin @var{string}[,@var{url}] +@opindex key-origin +gpg can track the origin of a key. Certain origins are implicitly +known (e.g. keyserver, web key directory) and set. For a standard +import the origin of the keys imported can be set with this option. +To list the possible values use "help" for @var{string}. Some origins +can store an optional @var{url} argument. That URL can appended to +@var{string} after a comma. + +@item --import-options @var{parameters} +@opindex import-options +This is a space or comma delimited string that gives options for +importing keys. Options can be prepended with a `no-' to give the +opposite meaning. The options are: + +@table @asis + + @item import-local-sigs + Allow importing key signatures marked as "local". This is not + generally useful unless a shared keyring scheme is being used. + Defaults to no. + + @item keep-ownertrust + Normally possible still existing ownertrust values of a key are + cleared if a key is imported. This is in general desirable so that + a formerly deleted key does not automatically gain an ownertrust + values merely due to import. On the other hand it is sometimes + necessary to re-import a trusted set of keys again but keeping + already assigned ownertrust values. This can be achieved by using + this option. + + @item repair-pks-subkey-bug + During import, attempt to repair the damage caused by the PKS keyserver + bug (pre version 0.9.6) that mangles keys with multiple subkeys. Note + that this cannot completely repair the damaged key as some crucial data + is removed by the keyserver, but it does at least give you back one + subkey. Defaults to no for regular @option{--import} and to yes for + keyserver @option{--receive-keys}. + + @item import-show + @itemx show-only + Show a listing of the key as imported right before it is stored. + This can be combined with the option @option{--dry-run} to only look + at keys; the option @option{show-only} is a shortcut for this + combination. The command @option{--show-keys} is another shortcut + for this. Note that suffixes like '#' for "sec" and "sbb" lines + may or may not be printed. + + @item import-export + Run the entire import code but instead of storing the key to the + local keyring write it to the output. The export options + @option{export-pka} and @option{export-dane} affect the output. This + option can be used to remove all invalid parts from a key without the + need to store it. + + @item merge-only + During import, allow key updates to existing keys, but do not allow + any new keys to be imported. Defaults to no. + + @item import-clean + After import, compact (remove all signatures except the + self-signature) any user IDs from the new key that are not usable. + Then, remove any signatures from the new key that are not usable. + This includes signatures that were issued by keys that are not present + on the keyring. This option is the same as running the @option{--edit-key} + command "clean" after import. Defaults to no. + + @item self-sigs-only + Accept only self-signatures while importing a key. All other key + signatures are skipped at an early import stage. This option can be + used with @code{keyserver-options} to mitigate attempts to flood a + key with bogus signatures from a keyserver. The drawback is that + all other valid key signatures, as required by the Web of Trust are + also not imported. Note that when using this option along with + import-clean it suppresses the final clean step after merging the + imported key into the existing key. + + @item repair-keys + After import, fix various problems with the + keys. For example, this reorders signatures, and strips duplicate + signatures. Defaults to yes. + + @item import-minimal + Import the smallest key possible. This removes all signatures except + the most recent self-signature on each user ID. This option is the + same as running the @option{--edit-key} command "minimize" after import. + Defaults to no. + + @item restore + @itemx import-restore + Import in key restore mode. This imports all data which is usually + skipped during import; including all GnuPG specific data. All other + contradicting options are overridden. +@end table + +@item --import-filter @{@var{name}=@var{expr}@} +@itemx --export-filter @{@var{name}=@var{expr}@} +@opindex import-filter +@opindex export-filter +These options define an import/export filter which are applied to the +imported/exported keyblock right before it will be stored/written. +@var{name} defines the type of filter to use, @var{expr} the +expression to evaluate. The option can be used several times which +then appends more expression to the same @var{name}. + +@noindent +The available filter types are: + +@table @asis + + @item keep-uid + This filter will keep a user id packet and its dependent packets in + the keyblock if the expression evaluates to true. + + @item drop-subkey + This filter drops the selected subkeys. + Currently only implemented for --export-filter. + + @item drop-sig + This filter drops the selected key signatures on user ids. + Self-signatures are not considered. + Currently only implemented for --import-filter. + +@end table + +For the syntax of the expression see the chapter "FILTER EXPRESSIONS". +The property names for the expressions depend on the actual filter +type and are indicated in the following table. + +The available properties are: + +@table @asis + + @item uid + A string with the user id. (keep-uid) + + @item mbox + The addr-spec part of a user id with mailbox or the empty string. + (keep-uid) + + @item key_algo + A number with the public key algorithm of a key or subkey packet. + (drop-subkey) + + @item key_created + @itemx key_created_d + The first is the timestamp a public key or subkey packet was + created. The second is the same but given as an ISO string, + e.g. "2016-08-17". (drop-subkey) + + @item fpr + The hexified fingerprint of the current subkey or primary key. + (drop-subkey) + + @item primary + Boolean indicating whether the user id is the primary one. (keep-uid) + + @item expired + Boolean indicating whether a user id (keep-uid), a key (drop-subkey), or a + signature (drop-sig) expired. + + @item revoked + Boolean indicating whether a user id (keep-uid) or a key (drop-subkey) has + been revoked. + + @item disabled + Boolean indicating whether a primary key is disabled. (not used) + + @item secret + Boolean indicating whether a key or subkey is a secret one. + (drop-subkey) + + @item usage + A string indicating the usage flags for the subkey, from the + sequence ``ecsa?''. For example, a subkey capable of just signing + and authentication would be an exact match for ``sa''. (drop-subkey) + + @item sig_created + @itemx sig_created_d + The first is the timestamp a signature packet was created. The + second is the same but given as an ISO date string, + e.g. "2016-08-17". (drop-sig) + + @item sig_algo + A number with the public key algorithm of a signature packet. (drop-sig) + + @item sig_digest_algo + A number with the digest algorithm of a signature packet. (drop-sig) + +@end table + +@item --export-options @var{parameters} +@opindex export-options +This is a space or comma delimited string that gives options for +exporting keys. Options can be prepended with a `no-' to give the +opposite meaning. The options are: + +@table @asis + + @item export-local-sigs + Allow exporting key signatures marked as "local". This is not + generally useful unless a shared keyring scheme is being used. + Defaults to no. + + @item export-attributes + Include attribute user IDs (photo IDs) while exporting. Not + including attribute user IDs is useful to export keys that are going + to be used by an OpenPGP program that does not accept attribute user + IDs. Defaults to yes. + + @item export-sensitive-revkeys + Include designated revoker information that was marked as + "sensitive". Defaults to no. + + @c Since GnuPG 2.1 gpg-agent manages the secret key and thus the + @c export-reset-subkey-passwd hack is not anymore justified. Such use + @c cases may be implemented using a specialized secret key export + @c tool. + @c @item export-reset-subkey-passwd + @c When using the @option{--export-secret-subkeys} command, this option resets + @c the passphrases for all exported subkeys to empty. This is useful + @c when the exported subkey is to be used on an unattended machine where + @c a passphrase doesn't necessarily make sense. Defaults to no. + + @item backup + @itemx export-backup + Export for use as a backup. The exported data includes all data + which is needed to restore the key or keys later with GnuPG. The + format is basically the OpenPGP format but enhanced with GnuPG + specific data. All other contradicting options are overridden. + + @item export-clean + Compact (remove all signatures from) user IDs on the key being + exported if the user IDs are not usable. Also, do not export any + signatures that are not usable. This includes signatures that were + issued by keys that are not present on the keyring. This option is + the same as running the @option{--edit-key} command "clean" before export + except that the local copy of the key is not modified. Defaults to + no. + + @item export-minimal + Export the smallest key possible. This removes all signatures except the + most recent self-signature on each user ID. This option is the same as + running the @option{--edit-key} command "minimize" before export except + that the local copy of the key is not modified. Defaults to no. + + @item export-pka + Instead of outputting the key material output PKA records suitable + to put into DNS zone files. An ORIGIN line is printed before each + record to allow diverting the records to the corresponding zone file. + + @item export-dane + Instead of outputting the key material output OpenPGP DANE records + suitable to put into DNS zone files. An ORIGIN line is printed before + each record to allow diverting the records to the corresponding zone + file. + +@end table + +@item --with-colons +@opindex with-colons +Print key listings delimited by colons. Note that the output will be +encoded in UTF-8 regardless of any @option{--display-charset} setting. This +format is useful when GnuPG is called from scripts and other programs +as it is easily machine parsed. The details of this format are +documented in the file @file{doc/DETAILS}, which is included in the GnuPG +source distribution. + +@item --fixed-list-mode +@opindex fixed-list-mode +Do not merge primary user ID and primary key in @option{--with-colon} +listing mode and print all timestamps as seconds since 1970-01-01. +Since GnuPG 2.0.10, this mode is always used and thus this option is +obsolete; it does not harm to use it though. + +@item --legacy-list-mode +@opindex legacy-list-mode +Revert to the pre-2.1 public key list mode. This only affects the +human readable output and not the machine interface +(i.e. @code{--with-colons}). Note that the legacy format does not +convey suitable information for elliptic curves. + +@item --with-fingerprint +@opindex with-fingerprint +Same as the command @option{--fingerprint} but changes only the format +of the output and may be used together with another command. + +@item --with-subkey-fingerprint +@opindex with-subkey-fingerprint +If a fingerprint is printed for the primary key, this option forces +printing of the fingerprint for all subkeys. This could also be +achieved by using the @option{--with-fingerprint} twice but by using +this option along with keyid-format "none" a compact fingerprint is +printed. + +@item --with-icao-spelling +@opindex with-icao-spelling +Print the ICAO spelling of the fingerprint in addition to the hex digits. + +@item --with-keygrip +@opindex with-keygrip +Include the keygrip in the key listings. In @code{--with-colons} mode +this is implicitly enable for secret keys. + +@item --with-key-origin +@opindex with-key-origin +Include the locally held information on the origin and last update of +a key in a key listing. In @code{--with-colons} mode this is always +printed. This data is currently experimental and shall not be +considered part of the stable API. + +@item --with-wkd-hash +@opindex with-wkd-hash +Print a Web Key Directory identifier along with each user ID in key +listings. This is an experimental feature and semantics may change. + +@item --with-secret +@opindex with-secret +Include info about the presence of a secret key in public key listings +done with @code{--with-colons}. + +@end table + +@c ******************************************* +@c ******** OPENPGP OPTIONS **************** +@c ******************************************* +@node OpenPGP Options +@subsection OpenPGP protocol specific options + +@table @gnupgtabopt + +@item -t, --textmode +@itemx --no-textmode +@opindex textmode +Treat input files as text and store them in the OpenPGP canonical text +form with standard "CRLF" line endings. This also sets the necessary +flags to inform the recipient that the encrypted or signed data is text +and may need its line endings converted back to whatever the local +system uses. This option is useful when communicating between two +platforms that have different line ending conventions (UNIX-like to Mac, +Mac to Windows, etc). @option{--no-textmode} disables this option, and +is the default. + +@item --force-v3-sigs +@itemx --no-force-v3-sigs +@item --force-v4-certs +@itemx --no-force-v4-certs +These options are obsolete and have no effect since GnuPG 2.1. + +@item --force-mdc +@itemx --disable-mdc +@opindex force-mdc +@opindex disable-mdc +These options are obsolete and have no effect since GnuPG 2.2.8. The +MDC is always used. But note: If the creation of a legacy non-MDC +message is exceptionally required, the option @option{--rfc2440} +allows for this. + +@item --disable-signer-uid +@opindex disable-signer-uid +By default the user ID of the signing key is embedded in the data signature. +As of now this is only done if the signing key has been specified with +@option{local-user} using a mail address, or with @option{sender}. This +information can be helpful for verifier to locate the key; see option +@option{--auto-key-retrieve}. + +@item --include-key-block +@opindex include-key-block +This option is used to embed the actual signing key into a data +signature. The embedded key is stripped down to a single user id and +includes only the signing subkey used to create the signature as well +as as valid encryption subkeys. All other info is removed from the +key to keep it and thus the signature small. This option is the +OpenPGP counterpart to the @command{gpgsm} option +@option{--include-certs}. + +@item --personal-cipher-preferences @var{string} +@opindex personal-cipher-preferences +Set the list of personal cipher preferences to @var{string}. Use +@command{@gpgname --version} to get a list of available algorithms, +and use @code{none} to set no preference at all. This allows the user +to safely override the algorithm chosen by the recipient key +preferences, as GPG will only select an algorithm that is usable by +all recipients. The most highly ranked cipher in this list is also +used for the @option{--symmetric} encryption command. + +@item --personal-digest-preferences @var{string} +@opindex personal-digest-preferences +Set the list of personal digest preferences to @var{string}. Use +@command{@gpgname --version} to get a list of available algorithms, +and use @code{none} to set no preference at all. This allows the user +to safely override the algorithm chosen by the recipient key +preferences, as GPG will only select an algorithm that is usable by +all recipients. The most highly ranked digest algorithm in this list +is also used when signing without encryption +(e.g. @option{--clear-sign} or @option{--sign}). + +@item --personal-compress-preferences @var{string} +@opindex personal-compress-preferences +Set the list of personal compression preferences to @var{string}. +Use @command{@gpgname --version} to get a list of available +algorithms, and use @code{none} to set no preference at all. This +allows the user to safely override the algorithm chosen by the +recipient key preferences, as GPG will only select an algorithm that +is usable by all recipients. The most highly ranked compression +algorithm in this list is also used when there are no recipient keys +to consider (e.g. @option{--symmetric}). + +@item --s2k-cipher-algo @var{name} +@opindex s2k-cipher-algo +Use @var{name} as the cipher algorithm for symmetric encryption with +a passphrase if @option{--personal-cipher-preferences} and +@option{--cipher-algo} are not given. The default is @value{GPGSYMENCALGO}. + +@item --s2k-digest-algo @var{name} +@opindex s2k-digest-algo +Use @var{name} as the digest algorithm used to mangle the passphrases +for symmetric encryption. The default is SHA-1. + +@item --s2k-mode @var{n} +@opindex s2k-mode +Selects how passphrases for symmetric encryption are mangled. If +@var{n} is 0 a plain passphrase (which is in general not recommended) +will be used, a 1 adds a salt (which should not be used) to the +passphrase and a 3 (the default) iterates the whole process a number +of times (see @option{--s2k-count}). + +@item --s2k-count @var{n} +@opindex s2k-count +Specify how many times the passphrases mangling for symmetric +encryption is repeated. This value may range between 1024 and +65011712 inclusive. The default is inquired from gpg-agent. Note +that not all values in the 1024-65011712 range are legal and if an +illegal value is selected, GnuPG will round up to the nearest legal +value. This option is only meaningful if @option{--s2k-mode} is set +to the default of 3. + + +@end table + +@c *************************** +@c ******* Compliance ******** +@c *************************** +@node Compliance Options +@subsection Compliance options + +These options control what GnuPG is compliant to. Only one of these +options may be active at a time. Note that the default setting of +this is nearly always the correct one. See the INTEROPERABILITY WITH +OTHER OPENPGP PROGRAMS section below before using one of these +options. + +@table @gnupgtabopt + +@item --gnupg +@opindex gnupg +Use standard GnuPG behavior. This is essentially OpenPGP behavior +(see @option{--openpgp}), but with some additional workarounds for common +compatibility problems in different versions of PGP. This is the +default option, so it is not generally needed, but it may be useful to +override a different compliance option in the gpg.conf file. + +@item --openpgp +@opindex openpgp +Reset all packet, cipher and digest options to strict OpenPGP +behavior. Use this option to reset all previous options like +@option{--s2k-*}, @option{--cipher-algo}, @option{--digest-algo} and +@option{--compress-algo} to OpenPGP compliant values. All PGP +workarounds are disabled. + +@item --rfc4880 +@opindex rfc4880 +Reset all packet, cipher and digest options to strict RFC-4880 +behavior. Note that this is currently the same thing as +@option{--openpgp}. + +@item --rfc4880bis +@opindex rfc4880bis +Enable experimental features from proposed updates to RFC-4880. This +option can be used in addition to the other compliance options. +Warning: The behavior may change with any GnuPG release and created +keys or data may not be usable with future GnuPG versions. + +@item --rfc2440 +@opindex rfc2440 +Reset all packet, cipher and digest options to strict RFC-2440 +behavior. Note that by using this option encryption packets are +created in a legacy mode without MDC protection. This is dangerous +and should thus only be used for experiments. See also option +@option{--ignore-mdc-error}. + +@item --pgp6 +@opindex pgp6 +Set up all options to be as PGP 6 compliant as possible. This +restricts you to the ciphers IDEA (if the IDEA plugin is installed), +3DES, and CAST5, the hashes MD5, SHA1 and RIPEMD160, and the +compression algorithms none and ZIP. This also disables +@option{--throw-keyids}, and making signatures with signing subkeys as PGP 6 +does not understand signatures made by signing subkeys. + +This option implies @option{--escape-from-lines}. + +@item --pgp7 +@opindex pgp7 +Set up all options to be as PGP 7 compliant as possible. This is +identical to @option{--pgp6} except that MDCs are not disabled, and the +list of allowable ciphers is expanded to add AES128, AES192, AES256, and +TWOFISH. + +@item --pgp8 +@opindex pgp8 +Set up all options to be as PGP 8 compliant as possible. PGP 8 is a lot +closer to the OpenPGP standard than previous versions of PGP, so all +this does is disable @option{--throw-keyids} and set +@option{--escape-from-lines}. All algorithms are allowed except for the +SHA224, SHA384, and SHA512 digests. + +@item --compliance @var{string} +@opindex compliance +This option can be used instead of one of the options above. Valid +values for @var{string} are the above option names (without the double +dash) and possibly others as shown when using "help" for @var{string}. + +@item --min-rsa-length @var{n} +@opindex min-rsa-length +This option adjusts the compliance mode "de-vs" for stricter key size +requirements. For example, a value of 3000 turns rsa2048 and dsa2048 +keys into non-VS-NfD compliant keys. + +@item --require-compliance +@opindex require-compliance +To check that data has been encrypted according to the rules of the +current compliance mode, a gpg user needs to evaluate the status +lines. This is allows frontends to handle compliance check in a more +flexible way. However, for scripted use the required evaluation of +the status-line requires quite some effort; this option can be used +instead to make sure that the gpg process exits with a failure if the +compliance rules are not fulfilled. Note that this option has +currently an effect only in "de-vs" mode. + +@end table + + +@c ******************************************* +@c ******** ESOTERIC OPTIONS *************** +@c ******************************************* +@node GPG Esoteric Options +@subsection Doing things one usually doesn't want to do + +@table @gnupgtabopt + +@item -n +@itemx --dry-run +@opindex dry-run +Don't make any changes (this is not completely implemented). + +@item --list-only +@opindex list-only +Changes the behaviour of some commands. This is like @option{--dry-run} but +different in some cases. The semantic of this option may be extended in +the future. Currently it only skips the actual decryption pass and +therefore enables a fast listing of the encryption keys. + +@item -i +@itemx --interactive +@opindex interactive +Prompt before overwriting any files. + +@item --debug-level @var{level} +@opindex debug-level +Select the debug level for investigating problems. @var{level} may be +a numeric value or by a keyword: + +@table @code + @item none + No debugging at all. A value of less than 1 may be used instead of + the keyword. + @item basic + Some basic debug messages. A value between 1 and 2 may be used + instead of the keyword. + @item advanced + More verbose debug messages. A value between 3 and 5 may be used + instead of the keyword. + @item expert + Even more detailed messages. A value between 6 and 8 may be used + instead of the keyword. + @item guru + All of the debug messages you can get. A value greater than 8 may be + used instead of the keyword. The creation of hash tracing files is + only enabled if the keyword is used. +@end table + +How these messages are mapped to the actual debugging flags is not +specified and may change with newer releases of this program. They are +however carefully selected to best aid in debugging. + +@item --debug @var{flags} +@opindex debug +Set debugging flags. All flags are or-ed and @var{flags} may be given +in C syntax (e.g. 0x0042) or as a comma separated list of flag names. +To get a list of all supported flags the single word "help" can be +used. + +@item --debug-all +@opindex debug-all +Set all useful debugging flags. + +@item --debug-iolbf +@opindex debug-iolbf +Set stdout into line buffered mode. This option is only honored when +given on the command line. + +@item --faked-system-time @var{epoch} +@opindex faked-system-time +This option is only useful for testing; it sets the system time back or +forth to @var{epoch} which is the number of seconds elapsed since the year +1970. Alternatively @var{epoch} may be given as a full ISO time string +(e.g. "20070924T154812"). + +If you suffix @var{epoch} with an exclamation mark (!), the system time +will appear to be frozen at the specified time. + +@item --enable-progress-filter +@opindex enable-progress-filter +Enable certain PROGRESS status outputs. This option allows frontends +to display a progress indicator while gpg is processing larger files. +There is a slight performance overhead using it. + +@item --status-fd @var{n} +@opindex status-fd +Write special status strings to the file descriptor @var{n}. +See the file DETAILS in the documentation for a listing of them. + +@item --status-file @var{file} +@opindex status-file +Same as @option{--status-fd}, except the status data is written to file +@var{file}. + +@item --logger-fd @var{n} +@opindex logger-fd +Write log output to file descriptor @var{n} and not to STDERR. + +@item --log-file @var{file} +@itemx --logger-file @var{file} +@opindex log-file +Same as @option{--logger-fd}, except the logger data is written to +file @var{file}. Use @file{socket://} to log to a socket. Note that +in this version of gpg the option has only an effect if +@option{--batch} is also used. + +@item --attribute-fd @var{n} +@opindex attribute-fd +Write attribute subpackets to the file descriptor @var{n}. This is most +useful for use with @option{--status-fd}, since the status messages are +needed to separate out the various subpackets from the stream delivered +to the file descriptor. + +@item --attribute-file @var{file} +@opindex attribute-file +Same as @option{--attribute-fd}, except the attribute data is written to +file @var{file}. + +@item --comment @var{string} +@itemx --no-comments +@opindex comment +Use @var{string} as a comment string in cleartext signatures and ASCII +armored messages or keys (see @option{--armor}). The default behavior is +not to use a comment string. @option{--comment} may be repeated multiple +times to get multiple comment strings. @option{--no-comments} removes +all comments. It is a good idea to keep the length of a single comment +below 60 characters to avoid problems with mail programs wrapping such +lines. Note that comment lines, like all other header lines, are not +protected by the signature. + +@item --emit-version +@itemx --no-emit-version +@opindex emit-version +Force inclusion of the version string in ASCII armored output. If +given once only the name of the program and the major number is +emitted, given twice the minor is also emitted, given thrice +the micro is added, and given four times an operating system identification +is also emitted. @option{--no-emit-version} (default) disables the version +line. + +@item --sig-notation @{@var{name}=@var{value}@} +@itemx --cert-notation @{@var{name}=@var{value}@} +@itemx -N, --set-notation @{@var{name}=@var{value}@} +@opindex sig-notation +@opindex cert-notation +@opindex set-notation +Put the name value pair into the signature as notation data. +@var{name} must consist only of printable characters or spaces, and +must contain a '@@' character in the form keyname@@domain.example.com +(substituting the appropriate keyname and domain name, of course). This +is to help prevent pollution of the IETF reserved notation +namespace. The @option{--expert} flag overrides the '@@' +check. @var{value} may be any printable string; it will be encoded in +UTF-8, so you should check that your @option{--display-charset} is set +correctly. If you prefix @var{name} with an exclamation mark (!), the +notation data will be flagged as critical +(rfc4880:5.2.3.16). @option{--sig-notation} sets a notation for data +signatures. @option{--cert-notation} sets a notation for key signatures +(certifications). @option{--set-notation} sets both. + +There are special codes that may be used in notation names. "%k" will +be expanded into the key ID of the key being signed, "%K" into the +long key ID of the key being signed, "%f" into the fingerprint of the +key being signed, "%s" into the key ID of the key making the +signature, "%S" into the long key ID of the key making the signature, +"%g" into the fingerprint of the key making the signature (which might +be a subkey), "%p" into the fingerprint of the primary key of the key +making the signature, "%c" into the signature count from the OpenPGP +smartcard, and "%%" results in a single "%". %k, %K, and %f are only +meaningful when making a key signature (certification), and %c is only +meaningful when using the OpenPGP smartcard. + +@item --known-notation @var{name} +@opindex known-notation +Adds @var{name} to a list of known critical signature notations. The +effect of this is that gpg will not mark a signature with a critical +signature notation of that name as bad. Note that gpg already knows +by default about a few critical signatures notation names. + +@item --sig-policy-url @var{string} +@itemx --cert-policy-url @var{string} +@itemx --set-policy-url @var{string} +@opindex sig-policy-url +@opindex cert-policy-url +@opindex set-policy-url +Use @var{string} as a Policy URL for signatures (rfc4880:5.2.3.20). If +you prefix it with an exclamation mark (!), the policy URL packet will +be flagged as critical. @option{--sig-policy-url} sets a policy url for +data signatures. @option{--cert-policy-url} sets a policy url for key +signatures (certifications). @option{--set-policy-url} sets both. + +The same %-expandos used for notation data are available here as well. + +@item --sig-keyserver-url @var{string} +@opindex sig-keyserver-url +Use @var{string} as a preferred keyserver URL for data signatures. If +you prefix it with an exclamation mark (!), the keyserver URL packet +will be flagged as critical. + +The same %-expandos used for notation data are available here as well. + +@item --set-filename @var{string} +@opindex set-filename +Use @var{string} as the filename which is stored inside messages. +This overrides the default, which is to use the actual filename of the +file being encrypted. Using the empty string for @var{string} +effectively removes the filename from the output. + +@item --for-your-eyes-only +@itemx --no-for-your-eyes-only +@opindex for-your-eyes-only +Set the `for your eyes only' flag in the message. This causes GnuPG to +refuse to save the file unless the @option{--output} option is given, +and PGP to use a "secure viewer" with a claimed Tempest-resistant font +to display the message. This option overrides @option{--set-filename}. +@option{--no-for-your-eyes-only} disables this option. + +@item --use-embedded-filename +@itemx --no-use-embedded-filename +@opindex use-embedded-filename +Try to create a file with a name as embedded in the data. This can be +a dangerous option as it enables overwriting files. Defaults to no. +Note that the option @option{--output} overrides this option. + +@item --cipher-algo @var{name} +@opindex cipher-algo +Use @var{name} as cipher algorithm. Running the program with the +command @option{--version} yields a list of supported algorithms. If +this is not used the cipher algorithm is selected from the preferences +stored with the key. In general, you do not want to use this option as +it allows you to violate the OpenPGP standard. +@option{--personal-cipher-preferences} is the safe way to accomplish the +same thing. + +@item --digest-algo @var{name} +@opindex digest-algo +Use @var{name} as the message digest algorithm. Running the program +with the command @option{--version} yields a list of supported algorithms. In +general, you do not want to use this option as it allows you to +violate the OpenPGP standard. @option{--personal-digest-preferences} is the +safe way to accomplish the same thing. + +@item --compress-algo @var{name} +@opindex compress-algo +Use compression algorithm @var{name}. "zlib" is RFC-1950 ZLIB +compression. "zip" is RFC-1951 ZIP compression which is used by PGP. +"bzip2" is a more modern compression scheme that can compress some +things better than zip or zlib, but at the cost of more memory used +during compression and decompression. "uncompressed" or "none" +disables compression. If this option is not used, the default +behavior is to examine the recipient key preferences to see which +algorithms the recipient supports. If all else fails, ZIP is used for +maximum compatibility. + +ZLIB may give better compression results than ZIP, as the compression +window size is not limited to 8k. BZIP2 may give even better +compression results than that, but will use a significantly larger +amount of memory while compressing and decompressing. This may be +significant in low memory situations. Note, however, that PGP (all +versions) only supports ZIP compression. Using any algorithm other +than ZIP or "none" will make the message unreadable with PGP. In +general, you do not want to use this option as it allows you to +violate the OpenPGP standard. @option{--personal-compress-preferences} is the +safe way to accomplish the same thing. + +@item --cert-digest-algo @var{name} +@opindex cert-digest-algo +Use @var{name} as the message digest algorithm used when signing a +key. Running the program with the command @option{--version} yields a +list of supported algorithms. Be aware that if you choose an algorithm +that GnuPG supports but other OpenPGP implementations do not, then some +users will not be able to use the key signatures you make, or quite +possibly your entire key. + +@item --disable-cipher-algo @var{name} +@opindex disable-cipher-algo +Never allow the use of @var{name} as cipher algorithm. +The given name will not be checked so that a later loaded algorithm +will still get disabled. + +@item --disable-pubkey-algo @var{name} +@opindex disable-pubkey-algo +Never allow the use of @var{name} as public key algorithm. +The given name will not be checked so that a later loaded algorithm +will still get disabled. + +@item --throw-keyids +@itemx --no-throw-keyids +@opindex throw-keyids +Do not put the recipient key IDs into encrypted messages. This helps to +hide the receivers of the message and is a limited countermeasure +against traffic analysis.@footnote{Using a little social engineering +anyone who is able to decrypt the message can check whether one of the +other recipients is the one he suspects.} On the receiving side, it may +slow down the decryption process because all available secret keys must +be tried. @option{--no-throw-keyids} disables this option. This option +is essentially the same as using @option{--hidden-recipient} for all +recipients. + +@item --not-dash-escaped +@opindex not-dash-escaped +This option changes the behavior of cleartext signatures +so that they can be used for patch files. You should not +send such an armored file via email because all spaces +and line endings are hashed too. You can not use this +option for data which has 5 dashes at the beginning of a +line, patch files don't have this. A special armor header +line tells GnuPG about this cleartext signature option. + +@item --escape-from-lines +@itemx --no-escape-from-lines +@opindex escape-from-lines +Because some mailers change lines starting with "From " to ">From " it +is good to handle such lines in a special way when creating cleartext +signatures to prevent the mail system from breaking the signature. Note +that all other PGP versions do it this way too. Enabled by +default. @option{--no-escape-from-lines} disables this option. + +@item --passphrase-repeat @var{n} +@opindex passphrase-repeat +Specify how many times @command{@gpgname} will request a new +passphrase be repeated. This is useful for helping memorize a +passphrase. Defaults to 1 repetition; can be set to 0 to disable any +passphrase repetition. Note that a @var{n} greater than 1 will pop up +the pinentry window @var{n}+1 times even if a modern pinentry with +two entry fields is used. + +@item --passphrase-fd @var{n} +@opindex passphrase-fd +Read the passphrase from file descriptor @var{n}. Only the first line +will be read from file descriptor @var{n}. If you use 0 for @var{n}, +the passphrase will be read from STDIN. This can only be used if only +one passphrase is supplied. + +Note that since Version 2.0 this passphrase is only used if the +option @option{--batch} has also been given. Since Version 2.1 +the @option{--pinentry-mode} also needs to be set to @code{loopback}. + +@item --passphrase-file @var{file} +@opindex passphrase-file +Read the passphrase from file @var{file}. Only the first line will +be read from file @var{file}. This can only be used if only one +passphrase is supplied. Obviously, a passphrase stored in a file is +of questionable security if other users can read this file. Don't use +this option if you can avoid it. + +Note that since Version 2.0 this passphrase is only used if the +option @option{--batch} has also been given. Since Version 2.1 +the @option{--pinentry-mode} also needs to be set to @code{loopback}. + +@item --passphrase @var{string} +@opindex passphrase +Use @var{string} as the passphrase. This can only be used if only one +passphrase is supplied. Obviously, this is of very questionable +security on a multi-user system. Don't use this option if you can +avoid it. + +Note that since Version 2.0 this passphrase is only used if the +option @option{--batch} has also been given. Since Version 2.1 +the @option{--pinentry-mode} also needs to be set to @code{loopback}. + +@item --pinentry-mode @var{mode} +@opindex pinentry-mode +Set the pinentry mode to @var{mode}. Allowed values for @var{mode} +are: +@table @asis + @item default + Use the default of the agent, which is @code{ask}. + @item ask + Force the use of the Pinentry. + @item cancel + Emulate use of Pinentry's cancel button. + @item error + Return a Pinentry error (``No Pinentry''). + @item loopback + Redirect Pinentry queries to the caller. Note that in contrast to + Pinentry the user is not prompted again if he enters a bad password. +@end table + +@item --no-symkey-cache +@opindex no-symkey-cache +Disable the passphrase cache used for symmetrical en- and decryption. +This cache is based on the message specific salt value +(cf. @option{--s2k-mode}). + +@item --request-origin @var{origin} +@opindex request-origin +Tell gpg to assume that the operation ultimately originated at +@var{origin}. Depending on the origin certain restrictions are applied +and the Pinentry may include an extra note on the origin. Supported +values for @var{origin} are: @code{local} which is the default, +@code{remote} to indicate a remote origin or @code{browser} for an +operation requested by a web browser. + +@item --command-fd @var{n} +@opindex command-fd +This is a replacement for the deprecated shared-memory IPC mode. +If this option is enabled, user input on questions is not expected +from the TTY but from the given file descriptor. It should be used +together with @option{--status-fd}. See the file doc/DETAILS in the source +distribution for details on how to use it. + +@item --command-file @var{file} +@opindex command-file +Same as @option{--command-fd}, except the commands are read out of file +@var{file} + +@item --allow-non-selfsigned-uid +@itemx --no-allow-non-selfsigned-uid +@opindex allow-non-selfsigned-uid +Allow the import and use of keys with user IDs which are not +self-signed. This is not recommended, as a non self-signed user ID is +trivial to forge. @option{--no-allow-non-selfsigned-uid} disables. + +@item --allow-freeform-uid +@opindex allow-freeform-uid +Disable all checks on the form of the user ID while generating a new +one. This option should only be used in very special environments as +it does not ensure the de-facto standard format of user IDs. + +@item --ignore-time-conflict +@opindex ignore-time-conflict +GnuPG normally checks that the timestamps associated with keys and +signatures have plausible values. However, sometimes a signature +seems to be older than the key due to clock problems. This option +makes these checks just a warning. See also @option{--ignore-valid-from} for +timestamp issues on subkeys. + +@item --ignore-valid-from +@opindex ignore-valid-from +GnuPG normally does not select and use subkeys created in the future. +This option allows the use of such keys and thus exhibits the +pre-1.0.7 behaviour. You should not use this option unless there +is some clock problem. See also @option{--ignore-time-conflict} for timestamp +issues with signatures. + +@item --ignore-crc-error +@opindex ignore-crc-error +The ASCII armor used by OpenPGP is protected by a CRC checksum against +transmission errors. Occasionally the CRC gets mangled somewhere on +the transmission channel but the actual content (which is protected by +the OpenPGP protocol anyway) is still okay. This option allows GnuPG +to ignore CRC errors. + +@item --ignore-mdc-error +@opindex ignore-mdc-error +This option changes a MDC integrity protection failure into a warning. +It is required to decrypt old messages which did not use an MDC. It +may also be useful if a message is partially garbled, but it is +necessary to get as much data as possible out of that garbled message. +Be aware that a missing or failed MDC can be an indication of an +attack. Use with great caution; see also option @option{--rfc2440}. + +@item --allow-weak-digest-algos +@opindex allow-weak-digest-algos +Signatures made with known-weak digest algorithms are normally +rejected with an ``invalid digest algorithm'' message. This option +allows the verification of signatures made with such weak algorithms. +MD5 is the only digest algorithm considered weak by default. See also +@option{--weak-digest} to reject other digest algorithms. + +@item --weak-digest @var{name} +@opindex weak-digest +Treat the specified digest algorithm as weak. Signatures made over +weak digests algorithms are normally rejected. This option can be +supplied multiple times if multiple algorithms should be considered +weak. See also @option{--allow-weak-digest-algos} to disable +rejection of weak digests. MD5 is always considered weak, and does +not need to be listed explicitly. + +@item --allow-weak-key-signatures +@opindex allow-weak-key-signatures +To avoid a minor risk of collision attacks on third-party key +signatures made using SHA-1, those key signatures are considered +invalid. This options allows to override this restriction. + +@item --override-compliance-check +@opindex --override-compliance-check +The signature verification only allows the use of keys suitable in the +current compliance mode. If the compliance mode has been forced by a +global option, there might be no way to check certain signature. This +option allows to override this and prints an extra warning in such a +case. This option is ignored in --batch mode so that no accidental +unattended verification may happen. + +@item --no-default-keyring +@opindex no-default-keyring +Do not add the default keyring to the list of keyrings. Note that +GnuPG needs for almost all operations a keyring. Thus if you use this +option and do not provide alternate keyrings via @option{--keyring}, +then GnuPG will still use the default keyring. + +@item --no-keyring +@opindex no-keyring +Do not use any keyring at all. This overrides the default and all +options which specify keyrings. + +@item --skip-verify +@opindex skip-verify +Skip the signature verification step. This may be +used to make the decryption faster if the signature +verification is not needed. + +@item --with-key-data +@opindex with-key-data +Print key listings delimited by colons (like @option{--with-colons}) and +print the public key data. + +@item --list-signatures +@opindex list-signatures +@itemx --list-sigs +@opindex list-sigs +Same as @option{--list-keys}, but the signatures are listed too. This +command has the same effect as using @option{--list-keys} with +@option{--with-sig-list}. Note that in contrast to +@option{--check-signatures} the key signatures are not verified. This +command can be used to create a list of signing keys missing in the +local keyring; for example: + +@example + gpg --list-sigs --with-colons USERID | \ + awk -F: '$1=="sig" && $2=="?" @{if($13)@{print $13@}else@{print $5@}@}' +@end example + +@item --fast-list-mode +@opindex fast-list-mode +Changes the output of the list commands to work faster; this is achieved +by leaving some parts empty. Some applications don't need the user ID +and the trust information given in the listings. By using this options +they can get a faster listing. The exact behaviour of this option may +change in future versions. If you are missing some information, don't +use this option. + +@item --no-literal +@opindex no-literal +This is not for normal use. Use the source to see for what it might be useful. + +@item --set-filesize +@opindex set-filesize +This is not for normal use. Use the source to see for what it might be useful. + +@item --show-session-key +@opindex show-session-key +Display the session key used for one message. See +@option{--override-session-key} for the counterpart of this option. + +We think that Key Escrow is a Bad Thing; however the user should have +the freedom to decide whether to go to prison or to reveal the content +of one specific message without compromising all messages ever +encrypted for one secret key. + +You can also use this option if you receive an encrypted message which +is abusive or offensive, to prove to the administrators of the +messaging system that the ciphertext transmitted corresponds to an +inappropriate plaintext so they can take action against the offending +user. + +@item --override-session-key @var{string} +@itemx --override-session-key-fd @var{fd} +@opindex override-session-key +Don't use the public key but the session key @var{string} respective +the session key taken from the first line read from file descriptor +@var{fd}. The format of this string is the same as the one printed by +@option{--show-session-key}. This option is normally not used but +comes handy in case someone forces you to reveal the content of an +encrypted message; using this option you can do this without handing +out the secret key. Note that using @option{--override-session-key} +may reveal the session key to all local users via the global process +table. Often it is useful to combine this option with +@option{--no-keyring}. + +@item --ask-sig-expire +@itemx --no-ask-sig-expire +@opindex ask-sig-expire +When making a data signature, prompt for an expiration time. If this +option is not specified, the expiration time set via +@option{--default-sig-expire} is used. @option{--no-ask-sig-expire} +disables this option. + +@item --default-sig-expire +@opindex default-sig-expire +The default expiration time to use for signature expiration. Valid +values are "0" for no expiration, a number followed by the letter d +(for days), w (for weeks), m (for months), or y (for years) (for +example "2m" for two months, or "5y" for five years), or an absolute +date in the form YYYY-MM-DD. Defaults to "0". + +@item --ask-cert-expire +@itemx --no-ask-cert-expire +@opindex ask-cert-expire +When making a key signature, prompt for an expiration time. If this +option is not specified, the expiration time set via +@option{--default-cert-expire} is used. @option{--no-ask-cert-expire} +disables this option. + +@item --default-cert-expire +@opindex default-cert-expire +The default expiration time to use for key signature expiration. +Valid values are "0" for no expiration, a number followed by the +letter d (for days), w (for weeks), m (for months), or y (for years) +(for example "2m" for two months, or "5y" for five years), or an +absolute date in the form YYYY-MM-DD. Defaults to "0". + +@item --default-new-key-algo @var{string} +@opindex default-new-key-algo @var{string} +This option can be used to change the default algorithms for key +generation. The @var{string} is similar to the arguments required for +the command @option{--quick-add-key} but slightly different. For +example the current default of @code{"rsa2048/cert,sign+rsa2048/encr"} +(or @code{"rsa3072"}) can be changed to the value of what we currently +call future default, which is @code{"ed25519/cert,sign+cv25519/encr"}. +You need to consult the source code to learn the details. Note that +the advanced key generation commands can always be used to specify a +key algorithm directly. + +@item --force-sign-key +@opindex force-sign-key +This option modifies the behaviour of the commands +@option{--quick-sign-key}, @option{--quick-lsign-key}, and the "sign" +sub-commands of @option{--edit-key} by forcing the creation of a key +signature, even if one already exists. + +@item --forbid-gen-key +@opindex forbid-gen-key +This option is intended for use in the global config file to disallow +the use of generate key commands. Those commands will then fail with +the error code for Not Enabled. + +@item --allow-secret-key-import +@opindex allow-secret-key-import +This is an obsolete option and is not used anywhere. + +@item --allow-multiple-messages +@item --no-allow-multiple-messages +@opindex allow-multiple-messages +Allow processing of multiple OpenPGP messages contained in a single file +or stream. Some programs that call GPG are not prepared to deal with +multiple messages being processed together, so this option defaults to +no. Note that versions of GPG prior to 1.4.7 always allowed multiple +messages. Future versions of GnUPG will remove this option. + +Warning: Do not use this option unless you need it as a temporary +workaround! + + +@item --enable-special-filenames +@opindex enable-special-filenames +This option enables a mode in which filenames of the form +@file{-&n}, where n is a non-negative decimal number, +refer to the file descriptor n and not to a file with that name. + +@item --no-expensive-trust-checks +@opindex no-expensive-trust-checks +Experimental use only. + +@item --preserve-permissions +@opindex preserve-permissions +Don't change the permissions of a secret keyring back to user +read/write only. Use this option only if you really know what you are doing. + +@item --default-preference-list @var{string} +@opindex default-preference-list +Set the list of default preferences to @var{string}. This preference +list is used for new keys and becomes the default for "setpref" in the +edit menu. + +@item --default-keyserver-url @var{name} +@opindex default-keyserver-url +Set the default keyserver URL to @var{name}. This keyserver will be +used as the keyserver URL when writing a new self-signature on a key, +which includes key generation and changing preferences. + +@item --list-config +@opindex list-config +Display various internal configuration parameters of GnuPG. This option +is intended for external programs that call GnuPG to perform tasks, and +is thus not generally useful. See the file @file{doc/DETAILS} in the +source distribution for the details of which configuration items may be +listed. @option{--list-config} is only usable with +@option{--with-colons} set. + +@item --list-gcrypt-config +@opindex list-gcrypt-config +Display various internal configuration parameters of Libgcrypt. + +@item --gpgconf-list +@opindex gpgconf-list +This command is similar to @option{--list-config} but in general only +internally used by the @command{gpgconf} tool. + +@item --gpgconf-test +@opindex gpgconf-test +This is more or less dummy action. However it parses the configuration +file and returns with failure if the configuration file would prevent +@command{@gpgname} from startup. Thus it may be used to run a syntax check +on the configuration file. + +@end table + +@c ******************************* +@c ******* Deprecated ************ +@c ******************************* +@node Deprecated Options +@subsection Deprecated options + +@table @gnupgtabopt + +@item --show-photos +@itemx --no-show-photos +@opindex show-photos +Causes @option{--list-keys}, @option{--list-signatures}, +@option{--list-public-keys}, @option{--list-secret-keys}, and verifying +a signature to also display the photo ID attached to the key, if +any. See also @option{--photo-viewer}. These options are deprecated. Use +@option{--list-options [no-]show-photos} and/or @option{--verify-options +[no-]show-photos} instead. + +@item --show-keyring +@opindex show-keyring +Display the keyring name at the head of key listings to show which +keyring a given key resides on. This option is deprecated: use +@option{--list-options [no-]show-keyring} instead. + +@item --always-trust +@opindex always-trust +Identical to @option{--trust-model always}. This option is deprecated. + +@item --show-notation +@itemx --no-show-notation +@opindex show-notation +Show signature notations in the @option{--list-signatures} or @option{--check-signatures} listings +as well as when verifying a signature with a notation in it. These +options are deprecated. Use @option{--list-options [no-]show-notation} +and/or @option{--verify-options [no-]show-notation} instead. + +@item --show-policy-url +@itemx --no-show-policy-url +@opindex show-policy-url +Show policy URLs in the @option{--list-signatures} or @option{--check-signatures} +listings as well as when verifying a signature with a policy URL in +it. These options are deprecated. Use @option{--list-options +[no-]show-policy-url} and/or @option{--verify-options +[no-]show-policy-url} instead. + + +@end table + + +@c ******************************************* +@c *************** **************** +@c *************** FILES **************** +@c *************** **************** +@c ******************************************* +@mansect files +@node GPG Configuration +@section Configuration files + +There are a few configuration files to control certain aspects of +@command{@gpgname}'s operation. Unless noted, they are expected in the +current home directory (@pxref{option --homedir}). + +@table @file + + @item gpg.conf + @efindex gpg.conf + This is the standard configuration file read by @command{@gpgname} on + startup. It may contain any valid long option; the leading two dashes + may not be entered and the option may not be abbreviated. This default + name may be changed on the command line (@pxref{gpg-option --options}). + You should backup this file. + +@end table + +Note that on larger installations, it is useful to put predefined files +into the directory @file{@value{SYSCONFSKELDIR}} so that +newly created users start up with a working configuration. +For existing users a small +helper script is provided to create these files (@pxref{addgnupghome}). + +For internal purposes @command{@gpgname} creates and maintains a few other +files; They all live in the current home directory (@pxref{option +--homedir}). Only the @command{@gpgname} program may modify these files. + + +@table @file + @item ~/.gnupg + @efindex ~/.gnupg + This is the default home directory which is used if neither the + environment variable @code{GNUPGHOME} nor the option + @option{--homedir} is given. + + @item ~/.gnupg/pubring.gpg + @efindex pubring.gpg + The public keyring using a legacy format. You should backup this file. + + If this file is not available, @command{gpg} defaults to the new + keybox format and creates a file @file{pubring.kbx} unless that file + already exists in which case that file will also be used for OpenPGP + keys. + + Note that in the case that both files, @file{pubring.gpg} and + @file{pubring.kbx} exists but the latter has no OpenPGP keys, the + legacy file @file{pubring.gpg} will be used. Take care: GnuPG + versions before 2.1 will always use the file @file{pubring.gpg} + because they do not know about the new keybox format. In the case + that you have to use GnuPG 1.4 to decrypt archived data you should + keep this file. + + @item ~/.gnupg/pubring.gpg.lock + The lock file for the public keyring. + + @item ~/.gnupg/pubring.kbx + @efindex pubring.kbx + The public keyring using the new keybox format. This file is shared + with @command{gpgsm}. You should backup this file. See above for + the relation between this file and it predecessor. + + To convert an existing @file{pubring.gpg} file to the keybox format, you + first backup the ownertrust values, then rename @file{pubring.gpg} to + @file{publickeys.backup}, so it won’t be recognized by any GnuPG version, + run import, and finally restore the ownertrust values: + + @example + $ cd ~/.gnupg + $ gpg --export-ownertrust >otrust.lst + $ mv pubring.gpg publickeys.backup + $ gpg --import-options restore --import publickeys.backups + $ gpg --import-ownertrust otrust.lst + @end example + + @item ~/.gnupg/pubring.kbx.lock + The lock file for @file{pubring.kbx}. + + @item ~/.gnupg/secring.gpg + @efindex secring.gpg + The legacy secret keyring as used by GnuPG versions before 2.1. It is not + used by GnuPG 2.1 and later. You may want to keep it in case you + have to use GnuPG 1.4 to decrypt archived data. + + @item ~/.gnupg/secring.gpg.lock + The lock file for the legacy secret keyring. + + @item ~/.gnupg/.gpg-v21-migrated + @efindex .gpg-v21-migrated + File indicating that a migration to GnuPG 2.1 has been done. + + @item ~/.gnupg/trustdb.gpg + @efindex trustdb.gpg + The trust database. There is no need to backup this file; it is better + to backup the ownertrust values (@pxref{option --export-ownertrust}). + + @item ~/.gnupg/trustdb.gpg.lock + The lock file for the trust database. + + @item ~/.gnupg/random_seed + @efindex random_seed + A file used to preserve the state of the internal random pool. + + @item ~/.gnupg/openpgp-revocs.d/ + @efindex openpgp-revocs.d + This is the directory where gpg stores pre-generated revocation + certificates. The file name corresponds to the OpenPGP fingerprint of + the respective key. It is suggested to backup those certificates and + if the primary private key is not stored on the disk to move them to + an external storage device. Anyone who can access theses files is + able to revoke the corresponding key. You may want to print them out. + You should backup all files in this directory and take care to keep + this backup closed away. + +@end table + +Operation is further controlled by a few environment variables: + +@table @asis + + @item HOME + @efindex HOME + Used to locate the default home directory. + + @item GNUPGHOME + @efindex GNUPGHOME + If set directory used instead of "~/.gnupg". + + @item GPG_AGENT_INFO + This variable is obsolete; it was used by GnuPG versions before 2.1. + + @item PINENTRY_USER_DATA + @efindex PINENTRY_USER_DATA + This value is passed via gpg-agent to pinentry. It is useful to convey + extra information to a custom pinentry. + + @item COLUMNS + @itemx LINES + @efindex COLUMNS + @efindex LINES + Used to size some displays to the full size of the screen. + + @item LANGUAGE + @efindex LANGUAGE + Apart from its use by GNU, it is used in the W32 version to override the + language selection done through the Registry. If used and set to a + valid and available language name (@var{langid}), the file with the + translation is loaded from + @code{@var{gpgdir}/gnupg.nls/@var{langid}.mo}. Here @var{gpgdir} is the + directory out of which the gpg binary has been loaded. If it can't be + loaded the Registry is tried and as last resort the native Windows + locale system is used. + + @item GNUPG_BUILD_ROOT + @efindex GNUPG_BUILD_ROOT + This variable is only used by the regression test suite as a helper + under operating systems without proper support to figure out the + name of a process' text file. + + @item GNUPG_EXEC_DEBUG_FLAGS + @efindex GNUPG_EXEC_DEBUG_FLAGS + This variable allows to enable diagnostics for process management. + A numeric decimal value is expected. Bit 0 enables general + diagnostics, bit 1 enables certain warnings on Windows. + +@end table + +When calling the gpg-agent component @command{@gpgname} sends a set of +environment variables to gpg-agent. The names of these variables can +be listed using the command: + +@example + gpg-connect-agent 'getinfo std_env_names' /bye | awk '$1=="D" @{print $2@}' +@end example + + + +@c ******************************************* +@c *************** **************** +@c *************** EXAMPLES **************** +@c *************** **************** +@c ******************************************* +@mansect examples +@node GPG Examples +@section Examples + +@table @asis + +@item gpg -se -r @code{Bob} @code{file} +sign and encrypt for user Bob + +@item gpg --clear-sign @code{file} +make a cleartext signature + +@item gpg -sb @code{file} +make a detached signature + +@item gpg -u 0x12345678 -sb @code{file} +make a detached signature with the key 0x12345678 + +@item gpg --list-keys @code{user_ID} +show keys + +@item gpg --fingerprint @code{user_ID} +show fingerprint + +@item gpg --verify @code{pgpfile} +@itemx gpg --verify @code{sigfile} [@code{datafile}] +Verify the signature of the file but do not output the data unless +requested. The second form is used for detached signatures, where +@code{sigfile} is the detached signature (either ASCII armored or +binary) and @code{datafile} are the signed data; if this is not given, the name of the +file holding the signed data is constructed by cutting off the +extension (".asc" or ".sig") of @code{sigfile} or by asking the user +for the filename. If the option @option{--output} is also used the +signed data is written to the file specified by that option; use +@code{-} to write the signed data to stdout. +@end table + + +@c ******************************************* +@c *************** **************** +@c *************** USER ID **************** +@c *************** **************** +@c ******************************************* +@mansect how to specify a user id +@ifset isman +@include specify-user-id.texi +@end ifset + +@mansect filter expressions +@chapheading FILTER EXPRESSIONS + +The options @option{--import-filter} and @option{--export-filter} use +expressions with this syntax (square brackets indicate an optional +part and curly braces a repetition, white space between the elements +are allowed): + +@c man:.RS +@example + [lc] @{[@{flag@}] PROPNAME op VALUE [lc]@} +@end example +@c man:.RE + +The name of a property (@var{PROPNAME}) may only consist of letters, +digits and underscores. The description for the filter type +describes which properties are defined. If an undefined property is +used it evaluates to the empty string. Unless otherwise noted, the +@var{VALUE} must always be given and may not be the empty string. No +quoting is defined for the value, thus the value may not contain the +strings @code{&&} or @code{||}, which are used as logical connection +operators. The flag @code{--} can be used to remove this restriction. + +Numerical values are computed as long int; standard C notation +applies. @var{lc} is the logical connection operator; either +@code{&&} for a conjunction or @code{||} for a disjunction. A +conjunction is assumed at the begin of an expression. Conjunctions +have higher precedence than disjunctions. If @var{VALUE} starts with +one of the characters used in any @var{op} a space after the +@var{op} is required. + +@noindent +The supported operators (@var{op}) are: + +@table @asis + + @item =~ + Substring must match. + + @item !~ + Substring must not match. + + @item = + The full string must match. + + @item <> + The full string must not match. + + @item == + The numerical value must match. + + @item != + The numerical value must not match. + + @item <= + The numerical value of the field must be LE than the value. + + @item < + The numerical value of the field must be LT than the value. + + @item > + The numerical value of the field must be GT than the value. + + @item >= + The numerical value of the field must be GE than the value. + + @item -le + The string value of the field must be less or equal than the value. + + @item -lt + The string value of the field must be less than the value. + + @item -gt + The string value of the field must be greater than the value. + + @item -ge + The string value of the field must be greater or equal than the value. + + @item -n + True if value is not empty (no value allowed). + + @item -z + True if value is empty (no value allowed). + + @item -t + Alias for "PROPNAME != 0" (no value allowed). + + @item -f + Alias for "PROPNAME == 0" (no value allowed). + +@end table + +@noindent +Values for @var{flag} must be space separated. The supported flags +are: + +@table @asis + @item -- + @var{VALUE} spans to the end of the expression. + @item -c + The string match in this part is done case-sensitive. + @item -t + Leading and trailing spaces are not removed from @var{VALUE}. + The optional single space after @var{op} is here required. +@end table + +The filter options concatenate several specifications for a filter of +the same type. For example the four options in this example: + +@c man:.RS +@example + --import-filter keep-uid="uid =~ Alfa" + --import-filter keep-uid="&& uid !~ Test" + --import-filter keep-uid="|| uid =~ Alpha" + --import-filter keep-uid="uid !~ Test" +@end example +@c man:.RE + +@noindent +which is equivalent to + +@c man:.RS +@example + --import-filter \ + keep-uid="uid =~ Alfa" && uid !~ Test" || uid =~ Alpha" && "uid !~ Test" +@end example +@c man:.RE + +imports only the user ids of a key containing the strings "Alfa" +or "Alpha" but not the string "test". + +@mansect trust values +@ifset isman +@include trust-values.texi +@end ifset + +@mansect return value +@chapheading RETURN VALUE + +The program returns 0 if there are no severe errors, 1 if at least a +signature was bad, and other error codes for fatal errors. + +Note that signature verification requires exact knowledge of what has +been signed and by whom it has beensigned. Using only the return code +is thus not an appropriate way to verify a signature by a script. +Either make proper use or the status codes or use the @command{gpgv} +tool which has been designed to make signature verification easy for +scripts. + +@mansect warnings +@chapheading WARNINGS + +Use a good password for your user account and make sure that all +security issues are always fixed on your machine. Also employ +diligent physical protection to your machine. Consider to use a good +passphrase as a last resort protection to your secret key in the case +your machine gets stolen. It is important that your secret key is +never leaked. Using an easy to carry around token or smartcard with +the secret key is often a advisable. + +If you are going to verify detached signatures, make sure that the +program knows about it; either give both filenames on the command line +or use @samp{-} to specify STDIN. + +For scripted or other unattended use of @command{gpg} make sure to use +the machine-parseable interface and not the default interface which is +intended for direct use by humans. The machine-parseable interface +provides a stable and well documented API independent of the locale or +future changes of @command{gpg}. To enable this interface use the +options @option{--with-colons} and @option{--status-fd}. For certain +operations the option @option{--command-fd} may come handy too. See +this man page and the file @file{DETAILS} for the specification of the +interface. Note that the GnuPG ``info'' pages as well as the PDF +version of the GnuPG manual features a chapter on unattended use of +GnuPG. As an alternative the library @command{GPGME} can be used as a +high-level abstraction on top of that interface. + +@mansect interoperability +@chapheading INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS + +GnuPG tries to be a very flexible implementation of the OpenPGP +standard. In particular, GnuPG implements many of the optional parts +of the standard, such as the SHA-512 hash, and the ZLIB and BZIP2 +compression algorithms. It is important to be aware that not all +OpenPGP programs implement these optional algorithms and that by +forcing their use via the @option{--cipher-algo}, +@option{--digest-algo}, @option{--cert-digest-algo}, or +@option{--compress-algo} options in GnuPG, it is possible to create a +perfectly valid OpenPGP message, but one that cannot be read by the +intended recipient. + +There are dozens of variations of OpenPGP programs available, and each +supports a slightly different subset of these optional algorithms. +For example, until recently, no (unhacked) version of PGP supported +the BLOWFISH cipher algorithm. A message using BLOWFISH simply could +not be read by a PGP user. By default, GnuPG uses the standard +OpenPGP preferences system that will always do the right thing and +create messages that are usable by all recipients, regardless of which +OpenPGP program they use. Only override this safe default if you +really know what you are doing. + +If you absolutely must override the safe default, or if the preferences +on a given key are invalid for some reason, you are far better off using +the @option{--pgp6}, @option{--pgp7}, or @option{--pgp8} options. These +options are safe as they do not force any particular algorithms in +violation of OpenPGP, but rather reduce the available algorithms to a +"PGP-safe" list. + +@mansect bugs +@chapheading BUGS + +On older systems this program should be installed as setuid(root). This +is necessary to lock memory pages. Locking memory pages prevents the +operating system from writing memory pages (which may contain +passphrases or other sensitive material) to disk. If you get no +warning message about insecure memory your operating system supports +locking without being root. The program drops root privileges as soon +as locked memory is allocated. + +Note also that some systems (especially laptops) have the ability to +``suspend to disk'' (also known as ``safe sleep'' or ``hibernate''). +This writes all memory to disk before going into a low power or even +powered off mode. Unless measures are taken in the operating system +to protect the saved memory, passphrases or other sensitive material +may be recoverable from it later. + +Before you report a bug you should first search the mailing list +archives for similar problems and second check whether such a bug has +already been reported to our bug tracker at @url{https://bugs.gnupg.org}. + +@c ******************************************* +@c *************** ************** +@c *************** UNATTENDED ************** +@c *************** ************** +@c ******************************************* +@manpause +@node Unattended Usage of GPG +@section Unattended Usage + +@command{@gpgname} is often used as a backend engine by other software. To help +with this a machine interface has been defined to have an unambiguous +way to do this. The options @option{--status-fd} and @option{--batch} +are almost always required for this. + +@menu +* Programmatic use of GnuPG:: Programmatic use of GnuPG +* Ephemeral home directories:: Ephemeral home directories +* The quick key manipulation interface:: The quick key manipulation interface +* Unattended GPG key generation:: Unattended key generation +@end menu + + +@node Programmatic use of GnuPG +@subsection Programmatic use of GnuPG + +Please consider using GPGME instead of calling @command{@gpgname} +directly. GPGME offers a stable, backend-independent interface for +many cryptographic operations. It supports OpenPGP and S/MIME, and +also allows interaction with various GnuPG components. + +GPGME provides a C-API, and comes with bindings for C++, Qt, and +Python. Bindings for other languages are available. + +@node Ephemeral home directories +@subsection Ephemeral home directories + +Sometimes you want to contain effects of some operation, for example +you want to import a key to inspect it, but you do not want this key +to be added to your keyring. In earlier versions of GnuPG, it was +possible to specify alternate keyring files for both public and secret +keys. In modern GnuPG versions, however, we changed how secret keys +are stored in order to better protect secret key material, and it was +not possible to preserve this interface. + +The preferred way to do this is to use ephemeral home directories. +This technique works across all versions of GnuPG. + +Create a temporary directory, create (or copy) a configuration that +meets your needs, make @command{@gpgname} use this directory either +using the environment variable @var{GNUPGHOME}, or the option +@option{--homedir}. GPGME supports this too on a per-context basis, +by modifying the engine info of contexts. Now execute whatever +operation you like, import and export key material as necessary. Once +finished, you can delete the directory. All GnuPG backend services +that were started will detect this and shut down. + +@node The quick key manipulation interface +@subsection The quick key manipulation interface + +Recent versions of GnuPG have an interface to manipulate keys without +using the interactive command @option{--edit-key}. This interface was +added mainly for the benefit of GPGME (please consider using GPGME, +see the manual subsection ``Programmatic use of GnuPG''). This +interface is described in the subsection ``How to manage your keys''. + +@node Unattended GPG key generation +@subsection Unattended key generation + +The command @option{--generate-key} may be used along with the option +@option{--batch} for unattended key generation. This is the most +flexible way of generating keys, but it is also the most complex one. +Consider using the quick key manipulation interface described in the +previous subsection ``The quick key manipulation interface''. + +The parameters for the key are either read from stdin or given as a +file on the command line. The format of the parameter file is as +follows: + +@itemize @bullet + @item Text only, line length is limited to about 1000 characters. + @item UTF-8 encoding must be used to specify non-ASCII characters. + @item Empty lines are ignored. + @item Leading and trailing white space is ignored. + @item A hash sign as the first non white space character indicates + a comment line. + @item Control statements are indicated by a leading percent sign, the + arguments are separated by white space from the keyword. + @item Parameters are specified by a keyword, followed by a colon. Arguments + are separated by white space. + @item + The first parameter must be @samp{Key-Type}; control statements may be + placed anywhere. + @item + The order of the parameters does not matter except for @samp{Key-Type} + which must be the first parameter. The parameters are only used for + the generated keyblock (primary and subkeys); parameters from previous + sets are not used. Some syntactically checks may be performed. + @item + Key generation takes place when either the end of the parameter file + is reached, the next @samp{Key-Type} parameter is encountered or at the + control statement @samp{%commit} is encountered. +@end itemize + +@noindent +Control statements: + +@table @asis + +@item %echo @var{text} +Print @var{text} as diagnostic. + +@item %dry-run +Suppress actual key generation (useful for syntax checking). + +@item %commit +Perform the key generation. Note that an implicit commit is done at +the next @asis{Key-Type} parameter. + +@item %pubring @var{filename} +Do not write the key to the default or commandline given keyring but +to @var{filename}. This must be given before the first commit to take +place, duplicate specification of the same filename is ignored, the +last filename before a commit is used. The filename is used until a +new filename is used (at commit points) and all keys are written to +that file. If a new filename is given, this file is created (and +overwrites an existing one). + +See the previous subsection ``Ephemeral home directories'' for a more +robust way to contain side-effects. + +@item %secring @var{filename} +This option is a no-op for GnuPG 2.1 and later. + +See the previous subsection ``Ephemeral home directories''. + +@item %ask-passphrase +@itemx %no-ask-passphrase +This option is a no-op for GnuPG 2.1 and later. + +@item %no-protection +Using this option allows the creation of keys without any passphrase +protection. This option is mainly intended for regression tests. + +@item %transient-key +If given the keys are created using a faster and a somewhat less +secure random number generator. This option may be used for keys +which are only used for a short time and do not require full +cryptographic strength. It takes only effect if used together with +the control statement @samp{%no-protection}. + +@end table + +@noindent +General Parameters: + +@table @asis + +@item Key-Type: @var{algo} +Starts a new parameter block by giving the type of the primary +key. The algorithm must be capable of signing. This is a required +parameter. @var{algo} may either be an OpenPGP algorithm number or a +string with the algorithm name. The special value @samp{default} may +be used for @var{algo} to create the default key type; in this case a +@samp{Key-Usage} shall not be given and @samp{default} also be used +for @samp{Subkey-Type}. + +@item Key-Length: @var{nbits} +The requested length of the generated key in bits. The default is +returned by running the command @samp{@gpgname --gpgconf-list}. +For ECC keys this parameter is ignored. + +@item Key-Curve: @var{curve} +The requested elliptic curve of the generated key. This is a required +parameter for ECC keys. It is ignored for non-ECC keys. + +@item Key-Grip: @var{hexstring} +This is optional and used to generate a CSR or certificate for an +already existing key. Key-Length will be ignored when given. + +@item Key-Usage: @var{usage-list} +Space or comma delimited list of key usages. Allowed values are +@samp{encrypt}, @samp{sign}, and @samp{auth}. This is used to +generate the key flags. Please make sure that the algorithm is +capable of this usage. Note that OpenPGP requires that all primary +keys are capable of certification, so no matter what usage is given +here, the @samp{cert} flag will be on. If no @samp{Key-Usage} is +specified and the @samp{Key-Type} is not @samp{default}, all allowed +usages for that particular algorithm are used; if it is not given but +@samp{default} is used the usage will be @samp{sign}. + +@item Subkey-Type: @var{algo} +This generates a secondary key (subkey). Currently only one subkey +can be handled. See also @samp{Key-Type} above. + +@item Subkey-Length: @var{nbits} +Length of the secondary key (subkey) in bits. The default is returned +by running the command @samp{@gpgname --gpgconf-list}. + +@item Subkey-Curve: @var{curve} +Key curve for a subkey; similar to @samp{Key-Curve}. + +@item Subkey-Usage: @var{usage-list} +Key usage lists for a subkey; similar to @samp{Key-Usage}. + +@item Passphrase: @var{string} +If you want to specify a passphrase for the secret key, enter it here. +Default is to use the Pinentry dialog to ask for a passphrase. + +@item Name-Real: @var{name} +@itemx Name-Comment: @var{comment} +@itemx Name-Email: @var{email} +The three parts of a user name. Remember to use UTF-8 encoding here. +If you don't give any of them, no user ID is created. + +@item Expire-Date: @var{iso-date}|(@var{number}[d|w|m|y]) +Set the expiration date for the key (and the subkey). It may either +be entered in ISO date format (e.g. "20000815T145012") or as number of +days, weeks, month or years after the creation date. The special +notation "seconds=N" is also allowed to specify a number of seconds +since creation. Without a letter days are assumed. Note that there +is no check done on the overflow of the type used by OpenPGP for +timestamps. Thus you better make sure that the given value make +sense. Although OpenPGP works with time intervals, GnuPG uses an +absolute value internally and thus the last year we can represent is +2105. + +@item Creation-Date: @var{iso-date} +Set the creation date of the key as stored in the key information and +which is also part of the fingerprint calculation. Either a date like +"1986-04-26" or a full timestamp like "19860426T042640" may be used. +The time is considered to be UTC. The special notation "seconds=N" +may be used to directly specify a the number of seconds since Epoch +(Unix time). If it is not given the current time is used. + +@item Preferences: @var{string} +Set the cipher, hash, and compression preference values for this key. +This expects the same type of string as the sub-command @samp{setpref} +in the @option{--edit-key} menu. + +@item Revoker: @var{algo}:@var{fpr} [sensitive] +Add a designated revoker to the generated key. Algo is the public key +algorithm of the designated revoker (i.e. RSA=1, DSA=17, etc.) +@var{fpr} is the fingerprint of the designated revoker. The optional +@samp{sensitive} flag marks the designated revoker as sensitive +information. Only v4 keys may be designated revokers. + +@item Keyserver: @var{string} +This is an optional parameter that specifies the preferred keyserver +URL for the key. + +@item Handle: @var{string} +This is an optional parameter only used with the status lines +KEY_CREATED and KEY_NOT_CREATED. @var{string} may be up to 100 +characters and should not contain spaces. It is useful for batch key +generation to associate a key parameter block with a status line. + +@end table + +@noindent +Here is an example on how to create a key in an ephemeral home directory: +@smallexample +$ export GNUPGHOME="$(mktemp -d)" +$ cat >foo <<EOF + %echo Generating a basic OpenPGP key + Key-Type: DSA + Key-Length: 1024 + Subkey-Type: ELG-E + Subkey-Length: 1024 + Name-Real: Joe Tester + Name-Comment: with stupid passphrase + Name-Email: joe@@foo.bar + Expire-Date: 0 + Passphrase: abc + # Do a commit here, so that we can later print "done" :-) + %commit + %echo done +EOF +$ @gpgname --batch --generate-key foo + [...] +$ @gpgname --list-secret-keys +/tmp/tmp.0NQxB74PEf/pubring.kbx +------------------------------- +sec dsa1024 2016-12-16 [SCA] + 768E895903FC1C44045C8CB95EEBDB71E9E849D0 +uid [ultimate] Joe Tester (with stupid passphrase) <joe@@foo.bar> +ssb elg1024 2016-12-16 [E] +@end smallexample + +@noindent +If you want to create a key with the default algorithms you would use +these parameters: +@smallexample + %echo Generating a default key + Key-Type: default + Subkey-Type: default + Name-Real: Joe Tester + Name-Comment: with stupid passphrase + Name-Email: joe@@foo.bar + Expire-Date: 0 + Passphrase: abc + # Do a commit here, so that we can later print "done" :-) + %commit + %echo done +@end smallexample + + + + +@mansect see also +@ifset isman +@command{gpgv}(1), +@command{gpgsm}(1), +@command{gpg-agent}(1) +@end ifset +@include see-also-note.texi |