summaryrefslogtreecommitdiffstats
path: root/doc/internals/api/buffer-api.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-13 12:18:05 +0000
commitb46aad6df449445a9fc4aa7b32bd40005438e3f7 (patch)
tree751aa858ca01f35de800164516b298887382919d /doc/internals/api/buffer-api.txt
parentInitial commit. (diff)
downloadhaproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.tar.xz
haproxy-b46aad6df449445a9fc4aa7b32bd40005438e3f7.zip
Adding upstream version 2.9.5.upstream/2.9.5
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/internals/api/buffer-api.txt')
-rw-r--r--doc/internals/api/buffer-api.txt653
1 files changed, 653 insertions, 0 deletions
diff --git a/doc/internals/api/buffer-api.txt b/doc/internals/api/buffer-api.txt
new file mode 100644
index 0000000..ac35300
--- /dev/null
+++ b/doc/internals/api/buffer-api.txt
@@ -0,0 +1,653 @@
+2018-07-13 - HAProxy Internal Buffer API
+
+
+1. Background
+
+HAProxy uses a "struct buffer" internally to store data received from external
+agents, as well as data to be sent to external agents. These buffers are also
+used during data transformation such as compression, header insertion or
+defragmentation, and are used to carry intermediary representations between the
+various internal layers. They support wrapping at the end, and they carry their
+own size information so that in theory it would be possible to use different
+buffer sizes in parallel even though this is not currently implemented.
+
+The format of this structure has evolved over time, to reach a point where it
+is convenient and versatile enough to have permitted to make several internal
+types converge into a single one (specifically the struct chunk disappeared).
+
+
+2. Representation as of 1.9-dev1
+
+The current buffer representation consists in a linear storage area of known
+size, with a head position indicating the oldest data, and a total data count
+expressed in bytes. The head position, data count and size are expressed as
+integers and are positive or null. By convention, the head position is strictly
+smaller than the buffer size and the data count is smaller than or equal to the
+size, so that wrapping can be resolved with a single subtract. A buffer not
+respecting these rules is said to be degenerate. Unless specified otherwise,
+the various API functions will adopt an undefined behaviour when passed such a
+degenerate buffer.
+
+ Buffer declaration :
+
+ struct buffer {
+ size_t size; // size of the storage area (wrapping point)
+ char *area; // start of the storage area
+ size_t data; // contents length after head
+ size_t head; // start offset of remaining data relative to area
+ };
+
+
+ Linear buffer representation :
+
+ area
+ |
+ V<--------------------------------------------------------->| size
+ +-----------+---------------------------------+-------------+
+ | |/////////////////////////////////| |
+ +-----------+---------------------------------+-------------+
+ |<--------->|<------------------------------->|
+ head data ^
+ |
+ tail
+
+
+ Wrapping buffer representation :
+
+ area
+ |
+ V<--------------------------------------------------------->| size
+ +---------------+------------------------+------------------+
+ |///////////////| |//////////////////|
+ +---------------+------------------------+------------------+
+ |<-------------------------------------->| head
+ |-------------->| ...data data...|<-----------------|
+ ^
+ |
+ tail
+
+
+3. Terminology
+
+Manipulating a buffer just based on a head and a wrapping data count is not
+very convenient, so we define a certain number of terms for important elements
+characterizing a buffer :
+
+ - origin : pointer to relative position 0 in the storage area. Undefined
+ when the buffer is not allocated.
+
+ - size : the allocated size of the storage area starting at the origin,
+ expressed in bytes. A buffer whose size is zero is said not to
+ be allocated, and its origin in this case is undefined.
+
+ - data : the amount of data the buffer contains, in bytes. It is always
+ lower than or equal to the buffer's size, hence it is always 0
+ for an unallocated buffer.
+
+ - emptiness : a buffer is said to be empty when it contains no data, hence
+ data == 0. It is possible for such buffers not to be allocated
+ and to have size == 0 as well.
+
+ - room : the available space in the buffer. This is its size minus data.
+
+ - head : position relative to origin where the oldest data byte is found
+ (it typically is what send() uses to pick outgoing data). The
+ head is strictly smaller than the size.
+
+ - tail : position relative to origin where the first spare byte is found
+ (it typically is what recv() uses to store incoming data). It
+ is always equal to the buffer's data added to its head modulo
+ the buffer's size.
+
+ - wrapping : the byte following the last one of the storage area loops back
+ to position 0. This is called wrapping. The wrapping point is
+ the first position relative to origin which doesn't belong to
+ the storage area. There is no wrapping when a buffer is not
+ allocated. Wrapping requires special care and means that the
+ regular string manipulation functions are not usable on most
+ buffers, unless it is known that no wrapping happens. Free
+ space may wrap as well if the buffer only contains data in the
+ middle.
+
+ - alignment : a buffer is said to be aligned if its data do not wrap. That
+ is, its head is strictly before the tail, or the buffer is
+ empty and the head is null. Aligning a buffer may be required
+ to use regular string manipulation functions which have no
+ support for wrapping.
+
+
+A buffer may be in three different states :
+ - unallocated : size == 0, area == 0 (b_is_null() is true)
+ - waiting : size == 0, area != 0
+ - allocated : size > 0, area > 0
+
+It is not permitted to have area == 0 with a non-null size. In addition, the
+waiting state may also be used to indicate a read-only buffer which does not
+wrap and which must not be freed (e.g. for use with error messages).
+
+The basic API only covers allocated buffers. Switching to/from the other states
+is covered by the management API since it requires specific allocation and free
+calls.
+
+
+4. Using buffers
+
+Buffers are defined in a few files :
+ - include/common/buf.h : structure definition, and manipulation functions
+ - include/common/buffer.h : resource management (alloc/free/wait lists)
+ - include/common/istbuf.h : advanced string manipulation
+
+
+4.1. Basic API
+
+The basic API is made of the functions which abstract accesses to the buffers
+and which help calculating their state, free space or used space.
+
+====================+==================+=======================================
+Function | Arguments/Return | Description
+--------------------+------------------+---------------------------------------
+b_is_null() | const buffer *buf| returns true if (and only if) the
+ | ret: int | buffer is not yet allocated and thus
+ | | points to a NULL area
+--------------------+------------------+---------------------------------------
+b_orig() | const buffer *buf| returns the pointer to the origin of
+ | ret: char * | the storage, which is the location of
+ | | byte at offset zero. This is mostly
+ | | used by functions which handle the
+ | | wrapping by themselves
+--------------------+------------------+---------------------------------------
+b_size() | const buffer *buf| returns the size of the buffer
+ | ret: size_t |
+--------------------+------------------+---------------------------------------
+b_wrap() | const buffer *buf| returns the pointer to the wrapping
+ | ret: char * | position of the buffer area, which is
+ | | by definition the first byte not part
+ | | of the buffer
+--------------------+------------------+---------------------------------------
+b_data() | const buffer *buf| returns the number of bytes present in
+ | ret: size_t | the buffer
+--------------------+------------------+---------------------------------------
+b_room() | const buffer *buf| returns the amount of room left in the
+ | ret: size_t | buffer
+--------------------+------------------+---------------------------------------
+b_full() | const buffer *buf| returns true if the buffer is full
+ | ret: int |
+--------------------+------------------+---------------------------------------
+__b_stop() | const buffer *buf| returns a pointer to the byte
+ | ret: char * | following the end of the buffer, which
+ | | may be out of the buffer if the buffer
+ | | ends on the last byte of the area. It
+ | | is the caller's responsibility to
+ | | either know that the buffer does not
+ | | wrap or to check that the result does
+ | | not wrap
+--------------------+------------------+---------------------------------------
+__b_stop_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the byte following the end
+ | | of the buffer, which may be out of the
+ | | buffer if the buffer ends on the last
+ | | byte of the area. It's the caller's
+ | | responsibility to either know that the
+ | | buffer does not wrap or to check that
+ | | the result does not wrap
+--------------------+------------------+---------------------------------------
+b_stop() | const buffer *buf| returns the pointer to the byte
+ | ret: char * | following the end of the buffer, which
+ | | may be out of the buffer if the buffer
+ | | ends on the last byte of the area
+--------------------+------------------+---------------------------------------
+b_stop_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the byte following the end
+ | | of the buffer, which may be out of the
+ | | buffer if the buffer ends on the last
+ | | byte of the area
+--------------------+------------------+---------------------------------------
+__b_peek() | const buffer *buf| returns a pointer to the data at
+ | size_t ofs | position <ofs> relative to the head of
+ | ret: char * | the buffer. Will typically point to
+ | | input data if called with the amount
+ | | of output data. It's the caller's
+ | | responsibility to either know that the
+ | | buffer does not wrap or to check that
+ | | the result does not wrap
+--------------------+------------------+---------------------------------------
+__b_peek_ofs() | const buffer *buf| returns an origin-relative offset
+ | size_t ofs | pointing to the data at position <ofs>
+ | ret: size_t | relative to the head of the
+ | | buffer. Will typically point to input
+ | | data if called with the amount of
+ | | output data. It's the caller's
+ | | responsibility to either know that the
+ | | buffer does not wrap or to check that
+ | | the result does not wrap
+--------------------+------------------+---------------------------------------
+b_peek() | const buffer *buf| returns a pointer to the data at
+ | size_t ofs | position <ofs> relative to the head of
+ | ret: char * | the buffer. Will typically point to
+ | | input data if called with the amount
+ | | of output data. If applying <ofs> to
+ | | the buffers' head results in a
+ | | position between <size> and 2*>size>-1
+ | | included, a wrapping compensation is
+ | | applied to the result
+--------------------+------------------+---------------------------------------
+b_peek_ofs() | const buffer *buf| returns an origin-relative offset
+ | size_t ofs | pointing to the data at position <ofs>
+ | ret: size_t | relative to the head of the
+ | | buffer. Will typically point to input
+ | | data if called with the amount of
+ | | output data. If applying <ofs> to the
+ | | buffers' head results in a position
+ | | between <size> and 2*>size>-1
+ | | included, a wrapping compensation is
+ | | applied to the result
+--------------------+------------------+---------------------------------------
+__b_head() | const buffer *buf| returns the pointer to the buffer's
+ | ret: char * | head, which is the location of the
+ | | next byte to be dequeued. The result
+ | | is undefined for unallocated buffers
+--------------------+------------------+---------------------------------------
+__b_head_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the buffer's head, which
+ | | is the location of the next byte to be
+ | | dequeued. The result is undefined for
+ | | unallocated buffers
+--------------------+------------------+---------------------------------------
+b_head() | const buffer *buf| returns the pointer to the buffer's
+ | ret: char * | head, which is the location of the
+ | | next byte to be dequeued. The result
+ | | is undefined for unallocated
+ | | buffers. If applying <ofs> to the
+ | | buffers' head results in a position
+ | | between <size> and 2*>size>-1
+ | | included, a wrapping compensation is
+ | | applied to the result
+--------------------+------------------+---------------------------------------
+b_head_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the buffer's head, which
+ | | is the location of the next byte to be
+ | | dequeued. The result is undefined for
+ | | unallocated buffers. If applying
+ | | <ofs> to the buffers' head results in
+ | | a position between <size> and
+ | | 2*>size>-1 included, a wrapping
+ | | compensation is applied to the result
+--------------------+------------------+---------------------------------------
+__b_tail() | const buffer *buf| returns the pointer to the tail of the
+ | ret: char * | buffer, which is the location of the
+ | | first byte where it is possible to
+ | | enqueue new data. The result is
+ | | undefined for unallocated buffers
+--------------------+------------------+---------------------------------------
+__b_tail_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the tail of the buffer,
+ | | which is the location of the first
+ | | byte where it is possible to enqueue
+ | | new data. The result is undefined for
+ | | unallocated buffers
+--------------------+------------------+---------------------------------------
+b_tail() | const buffer *buf| returns the pointer to the tail of the
+ | ret: char * | buffer, which is the location of the
+ | | first byte where it is possible to
+ | | enqueue new data. The result is
+ | | undefined for unallocated buffers
+--------------------+------------------+---------------------------------------
+b_tail_ofs() | const buffer *buf| returns an origin-relative offset
+ | ret: size_t | pointing to the tail of the buffer,
+ | | which is the location of the first
+ | | byte where it is possible to enqueue
+ | | new data. The result is undefined for
+ | | unallocated buffers
+--------------------+------------------+---------------------------------------
+b_next() | const buffer *buf| for an absolute pointer <p> pointing
+ | const char *p | to a valid location within buffer <b>,
+ | ret: char * | returns the absolute pointer to the
+ | | next byte, which usually is at (p + 1)
+ | | unless p reaches the wrapping point
+ | | and wrapping is needed
+--------------------+------------------+---------------------------------------
+b_next_ofs() | const buffer *buf| for an origin-relative offset <o>
+ | size_t o | pointing to a valid location within
+ | ret: size_t | buffer <b>, returns either the
+ | | relative offset pointing to the next
+ | | byte, which usually is at (o + 1)
+ | | unless o reaches the wrapping point
+ | | and wrapping is needed
+--------------------+------------------+---------------------------------------
+b_dist() | const buffer *buf| returns the distance between two
+ | const char *from | pointers, taking into account the
+ | const char *to | ability to wrap around the buffer's
+ | ret: size_t | end. The operation is not defined if
+ | | either of the pointers does not belong
+ | | to the buffer or if their distance is
+ | | greater than the buffer's size
+--------------------+------------------+---------------------------------------
+b_almost_full() | const buffer *buf| returns 1 if the buffer uses at least
+ | ret: int | 3/4 of its capacity, otherwise
+ | | zero. Buffers of size zero are
+ | | considered full
+--------------------+------------------+---------------------------------------
+b_space_wraps() | const buffer *buf| returns non-zero only if the buffer's
+ | ret: int | free space wraps, which means that the
+ | | buffer contains data that are not
+ | | touching at least one edge
+--------------------+------------------+---------------------------------------
+b_contig_data() | const buffer *buf| returns the amount of data that can
+ | size_t start | contiguously be read at once starting
+ | ret: size_t | from a relative offset <start> (which
+ | | allows to easily pre-compute blocks
+ | | for memcpy). The start point will
+ | | typically contain the amount of past
+ | | data already returned by a previous
+ | | call to this function
+--------------------+------------------+---------------------------------------
+b_contig_space() | const buffer *buf| returns the amount of bytes that can
+ | ret: size_t | be appended to the buffer at once
+--------------------+------------------+---------------------------------------
+b_getblk() | const buffer *buf| gets one full block of data at once
+ | char *blk | from a buffer, starting from offset
+ | size_t len | <offset> after the buffer's head, and
+ | size_t offset | limited to no more than <len> bytes.
+ | ret: size_t | The caller is responsible for ensuring
+ | | that neither <offset> nor <offset> +
+ | | <len> exceed the total number of bytes
+ | | available in the buffer. Return zero
+ | | if not enough data was available, in
+ | | which case blk is left undefined, or
+ | | the number of bytes read which is
+ | | equal to the requested size
+--------------------+------------------+---------------------------------------
+b_getblk_nc() | const buffer *buf| gets one or two blocks of data at once
+ | const char **blk1| from a buffer, starting from offset
+ | size_t *len1 | <ofs> after the beginning of its
+ | const char **blk2| output, and limited to no more than
+ | size_t *len2 | <max> bytes. The caller is responsible
+ | size_t ofs | for ensuring that neither <ofs> nor
+ | size_t max | <ofs>+<max> exceed the total number of
+ | ret: int | bytes available in the buffer. Returns
+ | | 0 if not enough data were available,
+ | | or the number of blocks filled (1 or
+ | | 2). <blk1> is always filled before
+ | | <blk2>. The unused blocks are left
+ | | undefined, and the buffer is left
+ | | unaffected. Unused buffers are left in
+ | | an undefined state
+--------------------+------------------+---------------------------------------
+b_reset() | buffer *buf | resets a buffer. The size is not
+ | ret: void | touched. In practice it resets the
+ | | head and the data length
+--------------------+------------------+---------------------------------------
+b_sub() | buffer *buf | decreases the buffer length by <count>
+ | size_t count | without touching the head position
+ | ret: void | (only the tail moves). this may mostly
+ | | be used to trim pending data before
+ | | reusing a buffer. The caller is
+ | | responsible for not removing more than
+ | | the available data
+--------------------+------------------+---------------------------------------
+b_add() | buffer *buf | increase the buffer length by <count>
+ | size_t count | without touching the head position
+ | ret: void | (only the tail moves). This is used
+ | | when adding data at the tail of a
+ | | buffer. The caller is responsible for
+ | | not adding more than the available
+ | | room
+--------------------+------------------+---------------------------------------
+b_set_data() | buffer *buf | sets the buffer's length, by adjusting
+ | size_t len | the buffer's tail only. The caller is
+ | ret: void | responsible for passing a valid length
+--------------------+------------------+---------------------------------------
+b_del() | buffer *buf | deletes <del> bytes at the head of
+ | size_t del | buffer <b> and updates the head. The
+ | ret: void | caller is responsible for not removing
+ | | more than the available data. This is
+ | | used after sending data from the
+ | | buffer
+--------------------+------------------+---------------------------------------
+b_realign_if_empty()| buffer *buf | realigns a buffer if it's empty, does
+ | ret: void | nothing otherwise. This is mostly used
+ | | after b_del() to make an empty
+ | | buffer's free space contiguous
+--------------------+------------------+---------------------------------------
+b_slow_realign() | buffer *buf | realigns a possibly wrapping buffer so
+ | size_t output | that the part remaining to be parsed
+ | ret: void | is contiguous and starts at the
+ | | beginning of the buffer and the
+ | | already parsed output part ends at the
+ | | end of the buffer. This provides the
+ | | best conditions since it allows the
+ | | largest inputs to be processed at once
+ | | and ensures that once the output data
+ | | leaves, the whole buffer is available
+ | | at once. The number of output bytes
+ | | supposedly present at the beginning of
+ | | the buffer and which need to be moved
+ | | to the end must be passed in <output>.
+ | | It will effectively make this offset
+ | | the new wrapping point. A temporary
+ | | swap area at least as large as b->size
+ | | must be provided in <swap>. It's up
+ | | to the caller to ensure <output> is no
+ | | larger than the difference between the
+ | | whole buffer's length and its input
+--------------------+------------------+---------------------------------------
+b_putchar() | buffer *buf | tries to append char <c> at the end of
+ | char c | buffer <b>. Supports wrapping. New
+ | ret: void | data are silently discarded if the
+ | | buffer is already full
+--------------------+------------------+---------------------------------------
+b_putblk() | buffer *buf | tries to append block <blk> at the end
+ | const char *blk | of buffer <b>. Supports wrapping. Data
+ | size_t len | are truncated if the buffer is too
+ | ret: size_t | short or if not enough space is
+ | | available. It returns the number of
+ | | bytes really copied
+--------------------+------------------+---------------------------------------
+b_move() | buffer *buf | moves block (src,len) left or right
+ | size_t src | by <shift> bytes, supporting wrapping
+ | size_t len | and overlapping.
+ | size_t shift |
+--------------------+------------------+---------------------------------------
+b_rep_blk() | buffer *buf | writes the block <blk> at position
+ | char *pos | <pos> which must be in buffer <b>, and
+ | char *end | moves the part between <end> and the
+ | const char *blk | buffer's tail just after the end of
+ | size_t len | the copy of <blk>. This effectively
+ | ret: int | replaces the part located between
+ | | <pos> and <end> with a copy of <blk>
+ | | of length <len>. The buffer's length
+ | | is automatically updated. This is used
+ | | to replace a block with another one
+ | | inside a buffer. The shift value
+ | | (positive or negative) is returned. If
+ | | there's no space left, the move is not
+ | | done. If <len> is null, the <blk>
+ | | pointer is allowed to be null, in
+ | | order to erase a block
+--------------------+------------------+---------------------------------------
+b_xfer() | buffer *src | transfers at most <count> bytes from
+ | buffer *dst | buffer <src> to buffer <dst> and
+ | size_t cout | returns the number of bytes copied.
+ | ret: size_t | The bytes are removed from <src> and
+ | | added to <dst>. The caller guarantees
+ | | that <count> is <= b_room(dst)
+====================+==================+=======================================
+
+
+4.2. String API
+
+The string API aims at providing both convenient and efficient ways to read and
+write to/from buffers using indirect strings (ist). These strings and some
+associated functions are defined in ist.h.
+
+====================+==================+=======================================
+Function | Arguments/Return | Description
+--------------------+------------------+---------------------------------------
+b_isteq() | const buffer *b | b_isteq() : returns > 0 if the first
+ | size_t o | <n> characters of buffer <b> starting
+ | size_t n | at offset <o> relative to the buffer's
+ | const ist ist | head match <ist>. (empty strings do
+ | ret: int | match). It is designed to be used with
+ | | reasonably small strings (it matches a
+ | | single byte per loop iteration). It is
+ | | expected to be used with an offset to
+ | | skip old data. Return value number of
+ | | matching bytes if >0, not enough bytes
+ | | or empty string if 0, or non-matching
+ | | byte found if <0.
+--------------------+------------------+---------------------------------------
+b_isteat | struct buffer *b | b_isteat() : "eats" string <ist> from
+ | const ist ist | the head of buffer <b>. Wrapping data
+ | ret: ssize_t | is explicitly supported. It matches a
+ | | single byte per iteration so strings
+ | | should remain reasonably small.
+ | | Returns the number of bytes matched
+ | | and eaten if >0, not enough bytes or
+ | | matched empty string if 0, or non
+ | | matching byte found if <0.
+--------------------+------------------+---------------------------------------
+b_istput | struct buffer *b | b_istput() : injects string <ist> at
+ | const ist ist | the tail of output buffer <b> provided
+ | ret: ssize_t | that it fits. Wrapping is supported.
+ | | It's designed for small strings as it
+ | | only writes a single byte per
+ | | iteration. Returns the number of
+ | | characters copied (ist.len), 0 if it
+ | | temporarily does not fit, or -1 if it
+ | | will never fit. It will only modify
+ | | the buffer upon success. In all cases,
+ | | the contents are copied prior to
+ | | reporting an error, so that the
+ | | destination at least contains a valid
+ | | but truncated string.
+--------------------+------------------+---------------------------------------
+b_putist | struct buffer *b | b_putist() : tries to copy as much as
+ | const ist ist | possible of string <ist> into buffer
+ | ret: size_t | <b> and returns the number of bytes
+ | | copied (truncation is possible). It
+ | | uses b_putblk() and is suitable for
+ | | large blocks.
+====================+==================+=======================================
+
+
+4.3. Management API
+
+The management API makes a distinction between an empty buffer, which by
+definition is not allocated but is ready to be allocated at any time, and a
+buffer which failed an allocation and is waiting for an available area to be
+offered. The functions allow to register on a list to be notified about buffer
+availability, to notify others of a number of buffers just released, and to be
+and to be notified of buffer availability. All allocations are made through the
+standard buffer pools.
+
+====================+==================+=======================================
+Function | Arguments/Return | Description
+--------------------+------------------+---------------------------------------
+buffer_almost_full | const buffer *buf| returns true if the buffer is not null
+ | ret: int | and at least 3/4 of the buffer's space
+ | | are used. A waiting buffer will match.
+--------------------+------------------+---------------------------------------
+b_alloc | buffer *buf | ensures that <buf> is allocated or
+ | ret: buffer * | allocates a buffer and assigns it to
+ | | *buf. If no memory is available, (1)
+ | | is assigned instead with a zero size.
+ | | The allocated buffer is returned, or
+ | | NULL in case no memory is available
+--------------------+------------------+---------------------------------------
+__b_free | buffer *buf | releases <buf> which must be allocated
+ | ret: void | and marks it empty
+--------------------+------------------+---------------------------------------
+b_free | buffer *buf | releases <buf> only if it is allocated
+ | ret: void | and marks it empty
+--------------------+------------------+---------------------------------------
+offer_buffers() | void *from | offer a buffer currently belonging to
+ | uint threshold | target <from> to whoever needs
+ | ret: void | one. Any pointer is valid for <from>,
+ | | including NULL. Its purpose is to
+ | | avoid passing a buffer to oneself in
+ | | case of failed allocations (e.g. need
+ | | two buffers, get one, fail, release it
+ | | and wake up self again). In case of
+ | | normal buffer release where it is
+ | | expected that the caller is not
+ | | waiting for a buffer, NULL is fine
+====================+==================+=======================================
+
+
+5. Porting code from older versions
+
+The previous buffer API introduced in 1.5-dev9 (May 2012) used to look like the
+following (with the struct renamed to old_buffer here to avoid confusion during
+quick lookups at the doc). It's worth noting that the "data" field used to be
+part of the struct but with a different type and meaning. It's important to be
+careful about potential code making use of &b->data as it will silently compile
+but fail.
+
+ Previous buffer declaration :
+
+ struct old_buffer {
+ char *p; /* buffer's start pointer, separates in and out data */
+ unsigned int size; /* buffer size in bytes */
+ unsigned int i; /* number of input bytes pending for analysis in the buffer */
+ unsigned int o; /* number of out bytes the sender can consume from this buffer */
+ char data[0]; /* <size> bytes */
+ };
+
+ Previous linear buffer representation :
+
+ data p
+ | |
+ V V
+ +-----------+--------------------+------------+-------------+
+ | |////////////////////|////////////| |
+ +-----------+--------------------+------------+-------------+
+ <---------------------------------------------------------> size
+ <------------------> <---------->
+ o i
+
+There is this correspondence between old and new fields (some will involve a
+knowledge of a channel when the output byte count is required) :
+
+ Old | New
+ --------+----------------------------------------------------
+ p | data + head + co_data(channel) // ci_head(channel)
+ size | size
+ i | data - co_data(channel) // ci_data(channel)
+ o | co_data(channel) // channel->output
+ data | area
+ --------+-----------------------------------------------------
+
+Then some common expressions can be mapped like this :
+
+ Old | New
+ -----------------------+---------------------------------------
+ b->data | b_orig(b)
+ &b->data | b_orig(b)
+ bi_ptr(b) | ci_head(channel)
+ bi_end(b) | b_tail(b)
+ bo_ptr(b) | b_head(b)
+ bo_end(b) | co_tail(channel)
+ bi_putblk(b,s,l) | b_putblk(b,s,l)
+ bo_getblk(b,s,l,o) | b_getblk(b,s,l,o)
+ bo_getblk_nc(b,s,l,o) | b_getblk_nc(b,s,l,o,0,co_data(channel))
+ b->i + b->o | b_data(b)
+ b->data + b->size | b_wrap(b)
+ b->i += len | b_add(b, len)
+ b->i -= len | b_sub(b, len)
+ b->i = len | b_set_data(b, co_data(channel) + len)
+ b->o += len | b_add(b, len); channel->output += len
+ b->o -= len | b_del(b, len); channel->output -= len
+ -----------------------+---------------------------------------
+
+The buffer modification functions are less straightforward and depend a lot on
+the context where they are used. It is strongly advised to figure in the list
+of functions above what is available based on what is attempted to be done in
+the existing code.
+
+Note that it is very likely that any out-of-tree code relying on buffers will
+not use both ->i and ->o but instead will use exclusively ->i on the side
+producing data and use exclusively ->o on the side consuming data (such as in a
+mux or in an applet). In both cases, it should be assumed that the other side
+is always zero and that either ->i or ->o is replaced with ->data, making the
+remaining code much simpler (no more code duplication based on the data
+direction).